| Easaqua™ L 600 | Vencorex | Easaqua™ L 600 is a low viscosity water dispersible aliphatic polyisocyanate. It exhibits several benefits, including optimal balance between low viscosity, high NCO content and emulsification ability; excellent humidity and moisture resistance, and impro...展开 Easaqua™ L 600 is a low viscosity water dispersible aliphatic polyisocyanate. It exhibits several benefits, including optimal balance between low viscosity, high NCO content and emulsification ability; excellent humidity and moisture resistance, and improved adhesion onto a wide range of substrates. This product is a hardener for high performance, light fastening, two-pack waterborne polyurethane coatings. It is recommended for plastic coatings, metal coatings, flooring coatings, and adhesives. 收起 | |
| Easaqua™ M 501 | Vencorex | Easaqua™ M 501 is a water-dispersible aliphatic polyisocyanate. It does not contain any alkyl phenol ethoxylate, and shows a lower viscosity and hydrophilicity compared to Easaqua™ M 502. It is used as a hardener of two-pack waterborne high performance po...展开 Easaqua™ M 501 is a water-dispersible aliphatic polyisocyanate. It does not contain any alkyl phenol ethoxylate, and shows a lower viscosity and hydrophilicity compared to Easaqua™ M 502. It is used as a hardener of two-pack waterborne high performance polyurethane coatings on various substrates, like wood, metal and plastics. This product can also be used as a solvent-free hardener of ultra-low VOC mat clearcoats or semigloss pigmented paints. 收起 | |
| Easaqua™ M 502 | Vencorex | Easaqua™ M 502 is a water dispersible aliphatic polyisocyanate. It does not contain any alkylphenolethoxylate. It is the APEO free version of Easaqua™ WT 2102. This product is suggested as a hardener of two-pack waterborne high-performance polyurethane co...展开 Easaqua™ M 502 is a water dispersible aliphatic polyisocyanate. It does not contain any alkylphenolethoxylate. It is the APEO free version of Easaqua™ WT 2102. This product is suggested as a hardener of two-pack waterborne high-performance polyurethane coatings on various substrates, like metal, plastics, wood, and concrete. Easaqua™ M 502 is also suggested as a crosslinker of paint and varnish formulations with very low VOC. 收起 | |
| Easaqua™ WAT-3 | Vencorex | Easaqua™ WAT-3 is a water dispersible crosslinker based on aliphatic polyisocyanate (HDI homopolymer). It does not contain any alkylphenolethoxylate. It is the APEO free version of Easaqua™ WAT-1. This product is suggested as a hardener of two-pack waterb...展开 Easaqua™ WAT-3 is a water dispersible crosslinker based on aliphatic polyisocyanate (HDI homopolymer). It does not contain any alkylphenolethoxylate. It is the APEO free version of Easaqua™ WAT-1. This product is suggested as a hardener of two-pack waterborne polyurethane leather finishing topcoats for automotive, upholstery and accessory leather products as well as 3D lamination applications in the automotive and furniture industries. Easaqua™ WAT-3 is also used as a crosslinker of waterborne adhesives for shows and wood to obtain D4 classification according to EN 204. 收起 | |
| Easaqua™ WAT-4 | Vencorex | Easaqua™ WAT-4是一种以脂质聚异氰酸酯（HDI均聚物）为基础的在水中可分散的交联剂。它不包含任何烷基酚乙氧基化物。它是Easaqua™ WAT的不含APEO版本。这款产品用作在鞋和木头上使用的水基粘合剂的交联剂，根据EN204获得D4分类。它还推荐用作双组分水性聚氨酯皮革涂饰面漆的固化剂，用于汽车、家居装饰用品，配套皮革用品以及3D层压应用等汽车和家具行业。 | |
| Easaqua™ X D 401 | Vencorex | Easaqua™ X D 401 is a fast drying water-dispersible aliphatic polyisocyanate, supplied in n-butyl acetate. It does not contain any alkyl phenol ethoxylate. This product is suggested as a fast drying hardener of two-pack waterborne high-performance polyure...展开 Easaqua™ X D 401 is a fast drying water-dispersible aliphatic polyisocyanate, supplied in n-butyl acetate. It does not contain any alkyl phenol ethoxylate. This product is suggested as a fast drying hardener of two-pack waterborne high-performance polyurethane coatings on various substrates, like wood, metal, and plastics. 收起 | |
| Easaqua™ X D 803 | Vencorex | Easaqua™ X D 803 is a fast drying ready-to-use water-dispersible aliphatic polyisocyanate. It does not contain any alkyl phenol ethoxylate, has a low odour, and is not labelled as flammable. This product is suggested for use as a fast drying hardener of t...展开 Easaqua™ X D 803 is a fast drying ready-to-use water-dispersible aliphatic polyisocyanate. It does not contain any alkyl phenol ethoxylate, has a low odour, and is not labelled as flammable. This product is suggested for use as a fast drying hardener of two-pack waterborne high performance polyurethane coatings on various substrates, like wood, metal, and plastics. 收起 | |
| Easaqua™ X D 870 | Vencorex | Easaqua™ X D 870 is a ready to use product, easily dispersed in aqueous formulation. This product is ideal for onsite application : Parquet repair and concrete flooring an also recommended for a variety of industrial applications; wood and metal coatings....展开 Easaqua™ X D 870 is a ready to use product, easily dispersed in aqueous formulation. This product is ideal for onsite application : Parquet repair and concrete flooring an also recommended for a variety of industrial applications; wood and metal coatings. Easaqua™ X D 870 is a unique combination of Easaqua™ Technology and HDI/IPDI derivatives suitable to comply with European VOC emissions regulations. 收起 | |
| ExBar™ 200 | Excalibar Minerals LLC | ExBar™ 200 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 15.0u and an oil absorption of 9. | |
| ExBar™ 325 | Excalibar Minerals LLC | ExBar™ 325 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 10.0u and an oil absorption of 10. | |
| ExBar™ 400 | Excalibar Minerals LLC | ExBar™ 400 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 8.0u and an oil absorption of 12. | |
| ExBar™ W 1 | Excalibar Minerals LLC | ExBar™ W 1 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 1 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 1u and an oil absorption of 15. 收起 | |
| ExBar™ W 2 | Excalibar Minerals LLC | ExBar™ W 2 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 2 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 2u and an oil absorption of 13. 收起 | |
| ExBar™ W 3 | Excalibar Minerals LLC | ExBar™ W 3 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 3 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 3u and an oil absorption of 13. 收起 | |
| ExBar™ W 325 | Excalibar Minerals LLC | ExBar™ W 325 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are pr...展开 ExBar™ W 325 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. 收起 | |
| ExBar™ W 4 | Excalibar Minerals LLC | ExBar™ W 4 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 4 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 4u and an oil absorption of 12. 收起 | |
| ExBar™ W 400 | Excalibar Minerals LLC | ExBar™ W 400 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are pr...展开 ExBar™ W 400 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 8u and an oil absorption of 10. 收起 | |
| ExCal® 100 | Excalibar Minerals LLC | ExCal® 100 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |
| ExCal® 200 | Excalibar Minerals LLC | ExCal® 200 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |
| ExCal® 325 | Excalibar Minerals LLC | ExCal® 325 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |
| ExCal® 400 | Excalibar Minerals LLC | ExCal® 400 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |
| ExCal® CW 100 | Excalibar Minerals LLC | ExCal® CW 100 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 100 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起 | |
| ExCal® CW 200 | Excalibar Minerals LLC | ExCal® CW 200 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 200 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起 | |
| ExCal® CW 325 | Excalibar Minerals LLC | ExCal® CW 325 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 325 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起 | |
| EXOCOAT™ 143 | Axcentive Sarl | EXOCOAT® 143 by Axcentive is a solvent-based organometallic resin (60% solids in Butyl acetate). It is characterized by non-sticky, hydrophobic, and oleophobic properties. Provides strong adhesion to steel, aluminum, glass, and plastics like PMMA and ABS ...展开 EXOCOAT® 143 by Axcentive is a solvent-based organometallic resin (60% solids in Butyl acetate). It is characterized by non-sticky, hydrophobic, and oleophobic properties. Provides strong adhesion to steel, aluminum, glass, and plastics like PMMA and ABS as well as to old coating layers. It covalently bonds with the substrate resulting in a very durable finish. It can be used as a standalone resin or might be formulated with other raw materials like white and colored pigments, organic resins, fillers, and additives. The use of water-based raw materials should be avoided. Durability is a unique feature of EXOCOAT® 143. It can sustain mechanical abrasion, and chemical attack and is UV stable. When applied at a very low layer thickness of 0.5 to 2µm it provides the surface with a protective hard coating that shows durable easy-to-clean, dirt resistance, anti-graffiti, and strong water repellency properties. It is suitable for ambient or force-cured, high-performance industrial coatings such as protective, coil, marine, and automotive. EXOCOAT® 143-based paints may be brushed, rolled, or sprayed by HVLP or airless spray. 收起 | |
| EXOCOAT™ 151A | Axcentive Sarl | EXOCOAT® 151A by Axcentive is a photocatalytic nano-titanium oxide sol with a strong self-cleaning performance. The photocatalytic effect results in effective radical formation which breaks down organic matter like dirt and soil. Airborne particles like V...展开 EXOCOAT® 151A by Axcentive is a photocatalytic nano-titanium oxide sol with a strong self-cleaning performance. The photocatalytic effect results in effective radical formation which breaks down organic matter like dirt and soil. Airborne particles like VOCs, NOx, and biopollution are also eradicated by EXOCOAT® 151A. It can be used as a general air purifier. Though most effective in outdoor light conditions, it is adapted for use under visible light as found in the interior. In all cases, it should be used as a topcoat to ensure its full effect. Glass and walls coated with EXOCOAT® 151A are super hydrophilic enhancing water-sheeting, also called the wash-off effect. It may be used on other flat surfaces such as plastics or coated substrates yet only interior. It dries under room temperature conditions. Spray application is recommended to reach thin monolayers which prove to be more effective. It is listed with EINECS. TSCA, AICS, and CEPA. 收起 | |
| EXOCOAT™ 151B | Axcentive Sarl | EXOCOAT® 151B by Axcentive is a photocatalytic nano-titanium oxide sol with a strong self-cleaning performance. The photocatalytic effect results in effective radical formation which breaks down organic matter like dirt and soil. Airborne particles like V...展开 EXOCOAT® 151B by Axcentive is a photocatalytic nano-titanium oxide sol with a strong self-cleaning performance. The photocatalytic effect results in effective radical formation which breaks down organic matter like dirt and soil. Airborne particles like VOCs, NOx, and biopollution are also eradicated by EXOCOAT® 151B. In all cases, it should be used as a topcoat to ensure its full effect. EXOCOAT® 151B coated walls are super hydrophilic enhancing water-sheeting, also called the wash-off effect. It is targeted for porous substrates like concrete, brickwork, and gypsum. It is not meant for glass substrates. It dries under room temperature conditions. Brush, roller, or Spray application is recommended to reach homogeneous coatings. It is listed with EINECS. TSCA, AICS, and CEPA. 收起 | |
| EXOCOAT™ 161 | Axcentive Sarl | EXOCOAT® 161 by Axcentive is a multipurpose, high-performance coating resin. It is preceramic, as it cures the ceramic layer. Upon curing, it converts to an inorganic highly cross linked layer with excellent barrier properties, high durability, and extre...展开 EXOCOAT® 161 by Axcentive is a multipurpose, high-performance coating resin. It is preceramic, as it cures the ceramic layer. Upon curing, it converts to an inorganic highly cross linked layer with excellent barrier properties, high durability, and extreme hardness (9H). Offers chemical-, scratch-, oxidation resistance, and temperature resistance over 1000°C for prolonged time. It can function as stand-alone resin at a layer thickness of 0.5 to 2 µm to form a durable finish that can be easy to clean. It bonds to substrates such as steel, aluminum, glass, and old coating layers. It can be used as conversion coating replacing Cr(VI). It may be co-formulated with the most frequently used coating ingredients from the group of pigments, fillers, resins, additives, and (co-)solvents and creates colored, super hard, or matte surfaces. EXOCOAT® 161 is highly advised to be used in aprotic solvents. It has a shelf life of 6 months. 收起 | |
| EXOCOAT™ AC | Axcentive Sarl | EXOCOAT® AC by Axcentive is a hybrid sol-gel resin for anti-corrosive conversion coatings in 60% ethanol. It is covalently bonded to the surface and applied directly to metal (iron alloy, galvanized steel, phosphate steel, stainless steel, and aluminum). ...展开 EXOCOAT® AC by Axcentive is a hybrid sol-gel resin for anti-corrosive conversion coatings in 60% ethanol. It is covalently bonded to the surface and applied directly to metal (iron alloy, galvanized steel, phosphate steel, stainless steel, and aluminum). It functions as a replacement for the Cr3+ and Cr6+ based system as used in metal plating and automotive industries. It converts the metal hydroxide surface into a stable, inert covalently bound monolayer. It can also be used as micrometer-thin primers under conventional organic coatings. It can be overcoated by epoxy primer or polyurethane topcoat systems. EXOCOAT® AC is suitable for conventional low & high pressure airless and air-mixing spraying, dipping, rolling, and brushing. It has a shelf life of 12 months. 收起 | |
| EXOCOAT™ ACX-W | Axcentive Sarl | EXOCOAT® ACX-W by Axcentive is a water-dilutable nanoparticle-modified anticorrosive conversion coating that covalently bonds to the surface through nanoparticles. It is applied directly to metals (iron alloy, galvanized steel, phosphate steel, stainless ...展开 EXOCOAT® ACX-W by Axcentive is a water-dilutable nanoparticle-modified anticorrosive conversion coating that covalently bonds to the surface through nanoparticles. It is applied directly to metals (iron alloy, galvanized steel, phosphate steel, stainless steel, and aluminum). It converts the metal hydroxide surface into a stable, inert covalently bound monolayer. It is used as a replacement for chromium-based primers on aluminum and other metals. It can be used as a conversion primer for a coating system based on an epoxy coating and polyurethane topcoat. It may omit toxic chemicals and functions as a replacement for Cr3+ and Cr6+-based systems used in metal plating and aerospace industries. EXOCOAT® ACX-W is applied with conventional low-pressure and high-pressure airless and air-mix spraying, dipping, rolling and brushing. It has a shelf life of 12 months. 收起 | |
| EXOCOAT™ AM | Axcentive Sarl | EXOCOAT® AM by Axcentive is a water-based, doped nano-titanium oxide sol with a strong antimicrobial effect and anatase structure. It prevents the build-up of microbes as the photocatalytic effect results in effective radical formation which breaks down v...展开 EXOCOAT® AM by Axcentive is a water-based, doped nano-titanium oxide sol with a strong antimicrobial effect and anatase structure. It prevents the build-up of microbes as the photocatalytic effect results in effective radical formation which breaks down viruses and bacteria. It eradicates viruses such as influenza, SARS-COV-2, dengue & hepatitis and bacteria such as E. coli, MSRA, streptococcus, listeria, pneumonia, and salmonella. It is activated by light and displays quick drying at room temperature. Spray application is recommended to reach thin monolayers. It exhibits curing at room temperature up to 300°C and super hard particles (1GPa Vickers). It is easy to apply & durable, allowing longer disinfection intervals while preserving hygiene level. It shows non-silver leaching, efficacious even under low light conditions, lower service frequency, and no need for frequent disinfection routine. It is used in the state-of-the-art continuous antimicrobial coating for high-traffic areas. EXOCOAT® AM is suitable for topcoats for any surface inside buildings, stores, hospitals, and vehicles. The shelf life of this product is 9 months. 收起 | |
| EXOCOAT™ Clearview | Axcentive Sarl | EXOCOAT® Clearview by Axcentive is a 1K hybrid sol-gel system in ethanol. It has been designed for water-repellent, easy-to-clean coatings for glass and ceramic substrates. A substrate coated with EXOCOAT® Clearview will turn into a hard, water-repellent ...展开 EXOCOAT® Clearview by Axcentive is a 1K hybrid sol-gel system in ethanol. It has been designed for water-repellent, easy-to-clean coatings for glass and ceramic substrates. A substrate coated with EXOCOAT® Clearview will turn into a hard, water-repellent durable easy-to-clean surface. EXOCOAT® Clearview keeps windscreens clean from raindrops and improves vision drastically, especially in difficult wet road conditions, which can be experienced day and night. Besides, it can be used to make easy-to-clean, water shedding tiles and chrome for example used in kitchens and bathrooms. 收起 | |
| EXOCOAT™ Clearview-2 | Axcentive Sarl | EXOCOAT® Clearview-2 by Axcentive is a 2K hybrid sol-gel in ethanol. It is designed for durable water repellent, easy-to-clean, dirt resistant glass coatings. This solvent-based nanosystem can be applied in coatings for automotive windscreens, or glass ba...展开 EXOCOAT® Clearview-2 by Axcentive is a 2K hybrid sol-gel in ethanol. It is designed for durable water repellent, easy-to-clean, dirt resistant glass coatings. This solvent-based nanosystem can be applied in coatings for automotive windscreens, or glass bathroom doors. It can be applied as such or diluted, in coatings as a monolayer to obtain a very hard and durable hydrophobic surface. EXOCOAT® Clearview-2 keeps windows clean from raindrops and improves vision drastically, especially in difficult wet road conditions, which can be experienced day and night. In bathroom glass, it makes the water run down fast and avoids water spots. 收起 | |
| EXOCOAT™ SH | Axcentive Sarl | EXOCOAT® SH by Axcentive is an inorganic 1K superhydrophobic Sol-Gel system for breathable concrete and masonry sealers. It has extremely high water exclusion properties which helps to produce superhydrophobic coatings. It can be applied on concrete, pave...展开 EXOCOAT® SH by Axcentive is an inorganic 1K superhydrophobic Sol-Gel system for breathable concrete and masonry sealers. It has extremely high water exclusion properties which helps to produce superhydrophobic coatings. It can be applied on concrete, pavement, walls, and stucco to get the so-called Lotus Effect. The sol-gel system deposits superhydrophobic particles on the porous substrate. EXOCOAT® SH will not form a film and as a result, the wall stays breathable. With the contact angle of 145o water droplets bounce back from the surface and will roll down immediately upon touch. Thus, the wall remains dry, and clean and will behave as an efficient barrier against water. 收起 | |
| Hexamethylene Diisocyanate (HDI) | Vencorex | Hexamethylene Diisocyanate (HDI) is also known as monomeric aliphatic diisocyanate. It is used in the chemical synthesis of aliphatic polyisocyanates and polyurethanes, such as aqueous dispersible polyurethane polymers (PUD) showing exceptional weathering...展开 Hexamethylene Diisocyanate (HDI) is also known as monomeric aliphatic diisocyanate. It is used in the chemical synthesis of aliphatic polyisocyanates and polyurethanes, such as aqueous dispersible polyurethane polymers (PUD) showing exceptional weathering resistance and flexibility. 收起 | |
| Isophorone Diisocyanate (IPDI) | Vencorex | Isophorone Diisocyanate (IPDI) is also known as monomeric cycloaliphatic diisocyanate. It is used in the chemical synthesis of aliphatic polyisocyanates and polyurethanes, such as aqueous dispersible polyurethane polymers (PUD) showing exceptional weather...展开 Isophorone Diisocyanate (IPDI) is also known as monomeric cycloaliphatic diisocyanate. It is used in the chemical synthesis of aliphatic polyisocyanates and polyurethanes, such as aqueous dispersible polyurethane polymers (PUD) showing exceptional weathering resistance. 收起 | |
| Tolonate™ D2 | Vencorex | Tolonate™ D2 is a blocked aliphatic polyisocyanate (HDI homopolymer), supplied at 75% solids in aromatic solvent. It is typically used as a crosslinker of hydroxylated polymers, notably polyesters and polyacrylates, to prepare heat activated one-component...展开 Tolonate™ D2 is a blocked aliphatic polyisocyanate (HDI homopolymer), supplied at 75% solids in aromatic solvent. It is typically used as a crosslinker of hydroxylated polymers, notably polyesters and polyacrylates, to prepare heat activated one-component polyurethane systems for weatherable coatings. It gives excellent mechanical properties in conjunction with outstanding resistance to solvents, abrasion and chemical products. This product is commonly used in Automotive OEM formulations, can and coil coatings and other general industrial coatings on metal. 收起 | |
| Tolonate™ HDB | Vencorex | Tolonate™ HDB is a viscous solvent-free aliphatic polyisocyanate based on Hexamethylene Diisocyanate biuret (HDI homopolymer). It is suggested for use in two-component polyurethane coatings and varnishes and as an intermediate for prepolymer synthesis. Th...展开 Tolonate™ HDB is a viscous solvent-free aliphatic polyisocyanate based on Hexamethylene Diisocyanate biuret (HDI homopolymer). It is suggested for use in two-component polyurethane coatings and varnishes and as an intermediate for prepolymer synthesis. This product is also recommended for exterior protective coatings for car repair, general industrial, plastics, and wood. 收起 | |
| Tolonate™ HDB 75 B | Vencorex | Tolonate™ HDB 75 B is an aliphatic polyisocyanate biuret (HDI homopolymer) supplied at 75% solids in butyl acetate. This is an aromatic solvent free cariation of Tolonate™ HDB 75 MX. It is suggested for use in conventional two-component polyester/alkyd ur...展开 Tolonate™ HDB 75 B is an aliphatic polyisocyanate biuret (HDI homopolymer) supplied at 75% solids in butyl acetate. This is an aromatic solvent free cariation of Tolonate™ HDB 75 MX. It is suggested for use in conventional two-component polyester/alkyd urethanes and polyurethane coatings with no aromatic solvents. This product is also recommended for weatherable protective coatings for industrial maintenance and auto refinish applications. 收起 | |
| Tolonate™ HDB 75 BX | Vencorex | Tolonate™ HDB 75 BX is an aliphatic polyisocyanate biuret (HDI homopolymer), supplied at 75% solids in a blend of butyl acetate and xylene. It is used for conventional two component polyester/alkyd urethanes and topcoats for transportation and metallic it...展开 Tolonate™ HDB 75 BX is an aliphatic polyisocyanate biuret (HDI homopolymer), supplied at 75% solids in a blend of butyl acetate and xylene. It is used for conventional two component polyester/alkyd urethanes and topcoats for transportation and metallic items. This product is also recommended for weatherable protective coatings for industrial maintenance and auto refinish applications. 收起 | |
| Tolonate™ HDB 75 M | Vencorex | Tolonate™ HDB 75 M is an aliphatic polyisocyanate biuret (HDI homopolymer) supplied at 75% solids in methoxypropyl acetate. It is used for conventional two component polyester/alkyd urethanes and polyurethane coatings with no aromatic solvents. This produ...展开 Tolonate™ HDB 75 M is an aliphatic polyisocyanate biuret (HDI homopolymer) supplied at 75% solids in methoxypropyl acetate. It is used for conventional two component polyester/alkyd urethanes and polyurethane coatings with no aromatic solvents. This product is also recommended for high durability protective coatings for industrial maintenance and auto refinish applications. 收起 | |
| Tolonate™ HDB 75 MX | Vencorex | Tolonate™ HDB 75 MX is an aliphatic polyisocyanate biuret (HDI homopolymer) supplied at 75% solids in a blend of methoxypropyl acetate and xylene. It is used for conventional two component polyester/alkyd urethanes and topcoats for transportation and meta...展开 Tolonate™ HDB 75 MX is an aliphatic polyisocyanate biuret (HDI homopolymer) supplied at 75% solids in a blend of methoxypropyl acetate and xylene. It is used for conventional two component polyester/alkyd urethanes and topcoats for transportation and metallic devices. This product is also recommended for high durability protective coatings for industrial maintenance. 收起 | |
| Tolonate™ HDB-LV | Vencorex | Tolonate™ HDB-LV is a low viscosity solvent-free aliphatic polyisocyanate based on Hexamethylene Diisocyanate biuret (HDI homopolymer). It is used for high solids two-component polyurethane coatings and varnishes, solvent-free polyurethane systems, and as...展开 Tolonate™ HDB-LV is a low viscosity solvent-free aliphatic polyisocyanate based on Hexamethylene Diisocyanate biuret (HDI homopolymer). It is used for high solids two-component polyurethane coatings and varnishes, solvent-free polyurethane systems, and as an intermediate for prepolymer synthesis. This product is also recommended for exterior protective coatings for car repair, general industrial, plastic, and wood applications. 收起 | |
| Tolonate™ HDT | Vencorex | Tolonate™ HDT is a medium viscosity, solvent-free aliphatic polyisocyanate based on Hexamethylene Diisocyanate trimer (HDI homopolymer). It is used for high solids two-component polyurethane coatings and varnishes. This product is also suggested for exter...展开 Tolonate™ HDT is a medium viscosity, solvent-free aliphatic polyisocyanate based on Hexamethylene Diisocyanate trimer (HDI homopolymer). It is used for high solids two-component polyurethane coatings and varnishes. This product is also suggested for exterior protective coatings for automotive, industrial machinery, plastic parts and car repair. 收起 | |
| Tolonate™ HDT 90 | Vencorex | Tolonate™ HDT 90 is an aliphatic polyisocyanate based on Hexamethylene Diisocyanate trimer (HDI homopolymer) supplied at 90% solids in a blend of butyl acetate and aromatic hydrocarbon. It is used for high solids two-component polyurethane coatings and va...展开 Tolonate™ HDT 90 is an aliphatic polyisocyanate based on Hexamethylene Diisocyanate trimer (HDI homopolymer) supplied at 90% solids in a blend of butyl acetate and aromatic hydrocarbon. It is used for high solids two-component polyurethane coatings and varnishes. This product is also suggested for exterior protective coatings for automotive OEM, car repair, industrial machinery, and plastic parts. 收起 | |
| Tolonate™ HDT 90 B | Vencorex | Tolonate™ HDT 90 B is an aliphatic polyisocyanate trimer (HDI homopolymer) supplied at 90% solids in a butyl acetate. It is used for high solids two-component polyurethane coatings and varnishes as well as aromatic solvent-free 2 K polyurethane coatings. ...展开 Tolonate™ HDT 90 B is an aliphatic polyisocyanate trimer (HDI homopolymer) supplied at 90% solids in a butyl acetate. It is used for high solids two-component polyurethane coatings and varnishes as well as aromatic solvent-free 2 K polyurethane coatings. This product is also suggested for exterior protective coatings for automotive OEM, car repair, indutrial machinery, and plastic parts. 收起 | |
| Tolonate™ HDT-LV | Vencorex | Tolonate™ HDT-LV is a low viscosity, solvent-free aliphatic polyisocyanate based on Hexamethylene Diisocyanate trimer (HDI homopolymer). It is used for high solids two-component polyurethane coatings and varnishes, solventfree polyurethane systems, and in...展开 Tolonate™ HDT-LV is a low viscosity, solvent-free aliphatic polyisocyanate based on Hexamethylene Diisocyanate trimer (HDI homopolymer). It is used for high solids two-component polyurethane coatings and varnishes, solventfree polyurethane systems, and intermediate for prepolymer synthesis. This product is also suggested for exterior protective coatings for automotive OEM, industrial machinery, plastic parts and car repair. 收起 | |
| Tolonate™ HDT-LV2 | Vencorex | Tolonate™ HDT-LV2 is a solvent-free, very low ciscosity aliphatic polyisocyanate based on Hexamethylene Diisocyanate trimer (HDI homopolymer). This product is supplied at 100% solids and is designed to reduce VOC emissions of the formulations. It is used ...展开 Tolonate™ HDT-LV2 is a solvent-free, very low ciscosity aliphatic polyisocyanate based on Hexamethylene Diisocyanate trimer (HDI homopolymer). This product is supplied at 100% solids and is designed to reduce VOC emissions of the formulations. It is used for very high solids, low VOC, two component polyurethanes coatings and varnishes. This product is also suggested for solventfree and waterborne polyurethane systems as well as polyurethane resin synthesis intermediates. 收起 | |
| Tolonate™ IDT 70 B | Vencorex | Tolonate™ IDT 70 B is an aliphatic polyisocyanate based on Isophorone Diisocyanate trimer (IPDI homopolymer) supplied at 70% solids in butyl acetate. It is used for two-component polyurethane coatings and varnishes, showing an excellent weathering resista...展开 Tolonate™ IDT 70 B is an aliphatic polyisocyanate based on Isophorone Diisocyanate trimer (IPDI homopolymer) supplied at 70% solids in butyl acetate. It is used for two-component polyurethane coatings and varnishes, showing an excellent weathering resistance. This product is also suitable for exterior protective coatings for automotive OEM and car repair, general industrial, plastics, and wood applications. 收起 | |
| Tolonate™ X F 450 | Vencorex | Tolonate™ X F 450 is a solvent free and low viscosity polyisocyanate based on HDI. This Tolonate™ is part of flexible polyisocyanate range developed by Vencorex specifically to provide elasticity to your coatings while maintaining high h...展开 Tolonate™ X F 450 is a solvent free and low viscosity polyisocyanate based on HDI. This Tolonate™ is part of flexible polyisocyanate range developed by Vencorex specifically to provide elasticity to your coatings while maintaining high hardness. It is especially suitable for fast drying formulations like aliphatic polyureas and polyaspartics, where it will overcome their brittleness and provide extended pot-life. 收起 | |
| Tolonate™ X FD 90 B | Vencorex | Tolonate™ X FD 90 B is a fast drying aliphatic polyisocyanate based on high functionality hexamethylene diisocyanate trimer (HDI homopolymer) supplied at 90% solids in butyl acetate. It is suggested for use as a hardener of fast drying non-yellowing two-p...展开 Tolonate™ X FD 90 B is a fast drying aliphatic polyisocyanate based on high functionality hexamethylene diisocyanate trimer (HDI homopolymer) supplied at 90% solids in butyl acetate. It is suggested for use as a hardener of fast drying non-yellowing two-pack polyurethane coatings for car repair, marine and protective, ACE and machinery, aerospace, general industry, automotive OEM and plastic parts. 收起 | |
| Tolonate™ X FLO 100 | Vencorex | Tolonate™ X FLO 100 is a partially bio-based, solvent-free and low viscosity aliphatic isocyanate polymer. It is particularly designed to product solvent-free polyurethane and polyurea materials and/or to reduce volatile organic compounds emissions of pol...展开 Tolonate™ X FLO 100 is a partially bio-based, solvent-free and low viscosity aliphatic isocyanate polymer. It is particularly designed to product solvent-free polyurethane and polyurea materials and/or to reduce volatile organic compounds emissions of polyurethane solvent-based formulations. 收起 | |
| YGA100-1 | Nanjing Yuangang Fine Chemical Co., Ltd. | YGA100-1 is a hydrogenated petroleum resin, in white granular form. This product can be used in coatings, adhesives, hot melt road marking paints, inks, and paint additives. | |
| YGA100-2 | Nanjing Yuangang Fine Chemical Co., Ltd. | YGA100-2 is a hydrogenated petroleum resin, in white granular form. This product can be used in coatings, adhesives, hot melt road marking paints, inks, and paint additives. | |
| YGA110-1 | Nanjing Yuangang Fine Chemical Co., Ltd. | YGA110-1 is a hydrogenated petroleum resin, in white granular form. This product can be used in coatings, adhesives, hot melt road marking paints, inks, and paint additives. | |
| YGA110-2 | Nanjing Yuangang Fine Chemical Co., Ltd. | YGA110-2 is a hydrogenated petroleum resin, in white granular form. This product can be used in coatings, adhesives, hot melt road marking paints, inks, and paint additives. | |
| YGB100-1 | Nanjing Yuangang Fine Chemical Co., Ltd. | YGB100-1 is a hydrogenated petroleum resin, in white granular form. This product can be used in hot melt road marking paints to increase toughness, hardness, and adhesion. | |
| YGB100-2 | Nanjing Yuangang Fine Chemical Co., Ltd. | YGB100-2 is a hydrogenated petroleum resin, in white granular form. This product can be used in hot melt road marking paints to increase toughness, hardness, and adhesion. |
