| Accoat 1G | Accoat A/S | Accoat 1G is a green colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 20 to 60µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating proc...展开 Accoat 1G is a green colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 20 to 60µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is well suited for coatings to protect from mild corrosion, textiles, paper and graphical industry rollers. 收起 | |
| Accoat 2G | Accoat A/S | Accoat 2G is a green colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 30 to 80µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating proc...展开 Accoat 2G is a green colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 30 to 80µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is well suited for coatings to protect from mild corrosion, textiles, paper and graphical industry rollers. 收起 | |
| Accofal 1G54 | Accoat A/S | Accoat 1G54 is a black colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 20 to 60µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating pr...展开 Accoat 1G54 is a black colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 20 to 60µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is safe to use in the foodstuffs industry and is well suited for coatings to protect from mild corrosion, textiles, paper and graphical industry rollers. 收起 | |
| Accofal 2G54 | Accoat A/S | Accoat 2G54 is a black colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 30 to 80µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating pr...展开 Accoat 2G54 is a black colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 30 to 80µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is safe to use in the foodstuffs industry and is well suited for coatings to protect from mild corrosion, textiles, paper and graphical industry rollers. 收起 | |
| Accofal 3G | Accoat A/S | Accoat 3G is a green colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 50 to 100µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating pro...展开 Accoat 3G is a green colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 50 to 100µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is well suited for coatings to protect from mild corrosion, textiles, paper and graphical industry rollers. 收起 | |
| Accofal 3G54 | Accoat A/S | Accoat 3G54 is a black colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 50 to 100µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating p...展开 Accoat 3G54 is a black colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 50 to 100µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is safe to use in the foodstuffs industry and is well suited for coatings to protect from mild corrosion, textiles, paper and graphical industry rollers. 收起 | |
| Accoflon 1C | Accoat A/S | Accoflon 1C is a tough, dark grey, heat-resistant fluoroplastic coating with a semi-matte finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. This allows the coating process to achieve optimal adh...展开 Accoflon 1C is a tough, dark grey, heat-resistant fluoroplastic coating with a semi-matte finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. This allows the coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is safe to use in the foodstuffs industry, particularly in mixers, dough vats, on conveyer belts and freeze-drying trays. 收起 | |
| Accoflon 2C | Accoat A/S | Accoflon 2C is a durable, dark grey fluorocarbon coating with a smooth and semi-glossy finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. This allows the coating process to achieve optimal adhesi...展开 Accoflon 2C is a durable, dark grey fluorocarbon coating with a smooth and semi-glossy finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. This allows the coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is safe to use in the foodstuffs industry, particularly in transport equipment, foodstuff production and fast food equipment. 收起 | |
| Accoflon H | Accoat A/S | Accoflon H is a durable, black fluorocarbon coating with a smooth and semi-glossy finish. Its layer thickness can range from 35 to 60µm .The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. This allows the...展开 Accoflon H is a durable, black fluorocarbon coating with a smooth and semi-glossy finish. Its layer thickness can range from 35 to 60µm .The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. This allows the coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is safe to use in the foodstuffs industry and transport equipment and plastic moulding equipment due to its durability and non-stick properties. 收起 | |
| Accoflon P348 | Accoat A/S | Accoflon P348 is a durable, black fluorocarbon coating with a smooth and semi-glossy finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. This allows the coating process to achieve optimal adhesion...展开 Accoflon P348 is a durable, black fluorocarbon coating with a smooth and semi-glossy finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. This allows the coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is safe to use in the foodstuffs industry, particularly in transport equipment, foodstuff production and fast food equipment. 收起 | |
| Accolan G | Accoat A/S | Accolan G is a tough, green, heat-resistant fluoroplastic coating with a semi-glossy finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. This allows the coating process to achieve optimal adhesion...展开 Accolan G is a tough, green, heat-resistant fluoroplastic coating with a semi-glossy finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. This allows the coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is used in the glue, varnish and paint industries as a coating for a mixing vats, regular vats and other processing equipment. 收起 | |
| Accolan LB | Accoat A/S | Accolan LB is a tough, grey/brown, heat-resistant fluoroplastic coating with a smooth and semi-glossy finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. It offers good protection against rust and...展开 Accolan LB is a tough, grey/brown, heat-resistant fluoroplastic coating with a smooth and semi-glossy finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. It offers good protection against rust and an optimal low friction to wear ratio. This product is used for many purposes such as on pumps, switchgears, bearings, guides for paper and film, sawblades and other garden tools. 收起 | |
| Accolan S | Accoat A/S | Accolan S is a tough, green and black, heat-resistant fluoroplastic coating with a smooth and semi-glossy finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. It offers good protection against rust...展开 Accolan S is a tough, green and black, heat-resistant fluoroplastic coating with a smooth and semi-glossy finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. It offers good protection against rust and an optimal low friction to wear ratio. This product is used for many purposes such as on pumps, switchgears, bearings, guides for paper and film, sawblades and other garden tools. 收起 | |
| Accolan Silver | Accoat A/S | Accolan Silver is a durable, silver-metallic, heat-resistant fluoroplastic coating with a half-matte finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. It offers good protection against rust and ...展开 Accolan Silver is a durable, silver-metallic, heat-resistant fluoroplastic coating with a half-matte finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. It offers good protection against rust and an optimal low friction to wear ratio. This product is safe to use in the foodstuffs industry, particularly in mixers, on conveyer belts and in dough vats. It is also an excellent coating for cutting tools, knives and freeze-drying trays. 收起 | |
| Accoshield | Accoat A/S | Accoshield is a black, thermoplastic fluoropolymer coating with a smooth and half-matte finish. It is mainly used for its anti-corrosive and non-stick properties. The product to be coated should be rinsed and sand-blasted to ensure all impurities have bee...展开 Accoshield is a black, thermoplastic fluoropolymer coating with a smooth and half-matte finish. It is mainly used for its anti-corrosive and non-stick properties. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. This allows the coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is used in industries where corrosion protection at high temperatures are required. 收起 | |
| Accotron | Accoat A/S | Accotron is a dark grey or green colored fluoropolymer coating. It is applied to products mainly to improve anti-corrosive attributes. This product is used in the paints and coatings industry. | |
| Accowear | Accoat A/S | Accowear is a reinforcement that is composed of a wear-resistant layer of stainless steel that is porous. It is used in conjunction with a fluoroplastic topcoat. The topcoat provides the non-stick properties while Accowear provides the wear-resistant prop...展开 Accowear is a reinforcement that is composed of a wear-resistant layer of stainless steel that is porous. It is used in conjunction with a fluoroplastic topcoat. The topcoat provides the non-stick properties while Accowear provides the wear-resistant properties. 收起 | |
| BURGESS 2211 | Burgess Pigment Company | BURGESS 2211 is a surface modified calcined aluminum silicate that has low warpage and high impact strength. This product is often used in urethane and polyester applications, and can also be used as an extender or filler in paints, coatings, adhesives, a...展开 BURGESS 2211 is a surface modified calcined aluminum silicate that has low warpage and high impact strength. This product is often used in urethane and polyester applications, and can also be used as an extender or filler in paints, coatings, adhesives, and sealants. 收起 | |
| BURGESS 30P® | Burgess Pigment Company | BURGESS 30P® is a flash calcined median particle size clay used extensively in PVC compounds for improving electricals. This product exhibits low specific gravity and excellent color, and can be used as an extender or filler in paints, coatings, adhesives...展开 BURGESS 30P® is a flash calcined median particle size clay used extensively in PVC compounds for improving electricals. This product exhibits low specific gravity and excellent color, and can be used as an extender or filler in paints, coatings, adhesives, and sealants. 收起 | |
| BURGESS 5178 | Burgess Pigment Company | BURGESS 5178 is hydrophobic and a chemical bond between the calcined clay and the polymer exists. This product has been designed to provide excellent wet and dry electrical properties through a proprietary surface treatment. It is often used as an extende...展开 BURGESS 5178 is hydrophobic and a chemical bond between the calcined clay and the polymer exists. This product has been designed to provide excellent wet and dry electrical properties through a proprietary surface treatment. It is often used as an extender or filler in paints, coatings, adhesives, and sealants. 收起 | |
| BURGESS CB | Burgess Pigment Company | BURGESS CB is a surface modified calcined aluminum silicate that has been designed for use in crosslinked polyethylene and polyester. This product can be used as an extender or filler in paints, coatings, adhesives, and sealants. | |
| BURGESS ICEBERG® | Burgess Pigment Company | BURGESS ICEBERG® is a conventionally calcined median particle size, 91-93 GE brightness clay used as an extender of TiO2. It is used in trade sales interior/exterior flat paints and as a filler in polyurethane sealants. This product can provide better opa...展开 BURGESS ICEBERG® is a conventionally calcined median particle size, 91-93 GE brightness clay used as an extender of TiO2. It is used in trade sales interior/exterior flat paints and as a filler in polyurethane sealants. This product can provide better opacity, higher degree of whiteness, better tint strength, easy dispersion, and low moisture levels in moisture sensitive applications. 收起 | |
| BURGESS ICECAP K® | Burgess Pigment Company | BURGESS ICECAP K® is an excellent extender for TiO2 in coatings where a high hegman grind is required. It has good electricals, low compression set, and low water absorption. This product can be used as an extender or filler in paints, coatings, adhesives...展开 BURGESS ICECAP K® is an excellent extender for TiO2 in coatings where a high hegman grind is required. It has good electricals, low compression set, and low water absorption. This product can be used as an extender or filler in paints, coatings, adhesives, and sealants. 收起 | |
| BURGESS ICECAP KSF | Burgess Pigment Company | BURGESS ICECAP KSF is a medium particle size anhydrous (calcined) kaolin clay that is used extensively as a “mild abrasive agent” in various polish applications. This product is a very finely ground dry white powder that exhibits dispersion and extremely ...展开 BURGESS ICECAP KSF is a medium particle size anhydrous (calcined) kaolin clay that is used extensively as a “mild abrasive agent” in various polish applications. This product is a very finely ground dry white powder that exhibits dispersion and extremely low 325 (45 micron) mesh residue. 收起 | |
| BURGESS KE | Burgess Pigment Company | BURGESS KE is an uniquely processed silane modified anhydrous aluminum silicate designed for use in crosslinked polyethylene and polyester systems. This product is a very pure, high brightness, low residue, calcined kaolin that can be used as an extender ...展开 BURGESS KE is an uniquely processed silane modified anhydrous aluminum silicate designed for use in crosslinked polyethylene and polyester systems. This product is a very pure, high brightness, low residue, calcined kaolin that can be used as an extender or filler in paints, coatings, adhesives, and sealants. 收起 | |
| BURGESS NO. 10 | Burgess Pigment Company | BURGESS NO. 10 is a fine particle size, medium brightness hydrous kaolin clay. This product exhibits dispersion in water based, acid pH, alkyd, or solvent based coatings and inks, electrodeposition body primers, as well as EIFS. | |
| BURGESS NO. 17 | Burgess Pigment Company | BURGESS NO. 17 is a fine particle size, high brightness hydrous kaolin clay used to extend TiO2 in semigloss paints and inks. This product is well ground, has excellent whiteness and dispersion, and high brightness. | |
| BURGESS NO. 20 | Burgess Pigment Company | BURGESS NO. 20 is a fine particle size, medium brightness hydrous kaolin clay. This product is used in jacketing layer of wire and cable insulation compounds, rubber roll covers, polishing compounds and concrete curing compounds. It can also be used as an...展开 BURGESS NO. 20 is a fine particle size, medium brightness hydrous kaolin clay. This product is used in jacketing layer of wire and cable insulation compounds, rubber roll covers, polishing compounds and concrete curing compounds. It can also be used as an extender or filler in paints, coatings, adhesives, and sealants. 收起 | |
| BURGESS NO. 27 | Burgess Pigment Company | BURGESS NO. 27 is an ultra fine particle size, medium brightness hydrous kaolin clay. This product is used as an extender in semigloss, satin, and gloss paints. | |
| BURGESS NO. 28 | Burgess Pigment Company | BURGESS NO. 28 is an ultra fine particle size, higher brightness hydrous kaolin clay. This product is used to extend TiO2 while maintaining tint strength and gloss. It is used extensively in water based satin and semigloss coating systems. | |
| BURGESS NO. 30® | Burgess Pigment Company | BURGESS NO. 30® is a partially calcined clay used extensively in PVC compounds to improve insulation resistance. This product exhibits excellent dispersion and color uniformity, and can be used as an extender or filler in paints, coatings, adhesives, and ...展开 BURGESS NO. 30® is a partially calcined clay used extensively in PVC compounds to improve insulation resistance. This product exhibits excellent dispersion and color uniformity, and can be used as an extender or filler in paints, coatings, adhesives, and sealants. 收起 | |
| BURGESS NO. 40 | Burgess Pigment Company | BURGESS NO. 40 is a median particle size, medium brightness hydrous kaolin clay. This product is an acid pH clay exhibiting excellent dispersion properties, and can be used in trade sales coatings and adhesives. | |
| BURGESS NO. 50® | Burgess Pigment Company | BURGESS NO. 50® is a high brightness, fine particle size calcined kaolin that is an extender of TiO2 in coatings or polymeric systems. This product facilitates reduction of prime pigment while maintaining opacity, whiteness, and tint strength of coatings ...展开 BURGESS NO. 50® is a high brightness, fine particle size calcined kaolin that is an extender of TiO2 in coatings or polymeric systems. This product facilitates reduction of prime pigment while maintaining opacity, whiteness, and tint strength of coatings and retention of physical properties in filled polymeric systems. 收起 | |
| BURGESS NO. 60 | Burgess Pigment Company | BURGESS NO. 60 is an acid pH, fine particle size, medium brightness hydrous kaolin clay with excellent dispersion properties. This product is used in inks, adhesives and industrial finishes, electrostatic deposition body primers, and EIFS. | |
| BURGESS NO. 97 | Burgess Pigment Company | BURGESS NO. 97 is an ultra fine particle size, medium brightness hydrous kaolin clay that exhibits excellent tint strength. This product is a well-ground extender of TiO2 in semigloss, satin, and gloss paints. | |
| BURGESS NO. 98 | Burgess Pigment Company | BURGESS NO. 98 is an ultra fine particle size, higher brightness hydrous kaolin clay that exhibits excellent tint strength and dispersion. This product is a well ground, premium extender of TiO2 in water based, solvent or alkyd semigloss, satin, and gloss...展开 BURGESS NO. 98 is an ultra fine particle size, higher brightness hydrous kaolin clay that exhibits excellent tint strength and dispersion. This product is a well ground, premium extender of TiO2 in water based, solvent or alkyd semigloss, satin, and gloss paints. 收起 | |
| BURGESS OPTIPOZZ® | Burgess Pigment Company | BURGESS OPTIPOZZ® is a high reactivity metakaolin produced by a patented process. This product increases chemical resistance and durability, and reduces shrinkage. It can be used as an extender or filler in paints, coatings, adhesives, and sealants. | |
| BURGESS OPTIWHITE® | Burgess Pigment Company | BURGESS OPTIWHITE® is a premium whiteness flash calcined extender for TiO2 exhibiting GE brightness used extensively in First Line interior/exterior flat or low sheen water based and alkyd paint systems. This product exhibits excellent whiteness retention...展开 BURGESS OPTIWHITE® is a premium whiteness flash calcined extender for TiO2 exhibiting GE brightness used extensively in First Line interior/exterior flat or low sheen water based and alkyd paint systems. This product exhibits excellent whiteness retention and hiding when embedded in coatings and polymers. It can provide excellent dispersion, high hiding, and improved film properties. 收起 | |
| BURGESS OPTIWHITE MX® | Burgess Pigment Company | BURGESS OPTIWHITE MX® is a flash calcined clay exhibiting GE Brightness and extension of TiO2, whiteness, touchup, and tint strength. This product is used extensively in flat or low sheen interior/exterior trade sales water-based, alkyd, or solvent-based ...展开 BURGESS OPTIWHITE MX® is a flash calcined clay exhibiting GE Brightness and extension of TiO2, whiteness, touchup, and tint strength. This product is used extensively in flat or low sheen interior/exterior trade sales water-based, alkyd, or solvent-based coatings by reducing the amount of TiO2 and lowering raw material costs while maintaining opacity, whiteness, and tint strength. 收起 | |
| BURGESS OPTIWHITE P® | Burgess Pigment Company | BURGESS OPTIWHITE P® is a flash calcined clay used extensively to extend TiO2. This product exhibits GE Brightness, improves touchup, scrub, and burnish resistance. It is used in flat interior trade sales paints which do not require maximum whiteness. | |
| BURGESS POLYCLAY | Burgess Pigment Company | BURGESS POLYCLAY is a fine particle size, medium brightness hydrous kaolin clay used in inks. | |
| BURGESS THERMOGLACE H | Burgess Pigment Company | BURGESS THERMOGLACE H is a delaminated, fine particle size, medium brightness hydrous kaolin clay. This product is used in primers and trade sales coatings for the reduction of mud-cracking (micro-cracking due to film stress) and reduction of permeability...展开 BURGESS THERMOGLACE H is a delaminated, fine particle size, medium brightness hydrous kaolin clay. This product is used in primers and trade sales coatings for the reduction of mud-cracking (micro-cracking due to film stress) and reduction of permeability. 收起 | |
| Cinilex® DPP Orange SJ1C | CINIC Chemicals (Shanghai) Co., Ltd. | Cinilex® DPP Orange SJ1C is a highly opaque, high color strength, and saturated orange pigment. This product can provide high opacity, better flow, longer drying times, and high color strength. It is most commonly used in decorative, industrial, and selec...展开 Cinilex® DPP Orange SJ1C is a highly opaque, high color strength, and saturated orange pigment. This product can provide high opacity, better flow, longer drying times, and high color strength. It is most commonly used in decorative, industrial, and selected powder coating applications. 收起 | |
| Cinilex® DPP Red SR1C | CINIC Chemicals (Shanghai) Co., Ltd. | Cinilex® DPP Red SR1C is an opaque and highly weather resistant mid shade red organic pigment. This product can provide good chemical and solvent resistance and improve weather stability. It is most commonly used in architectural powder coating, coil coat...展开 Cinilex® DPP Red SR1C is an opaque and highly weather resistant mid shade red organic pigment. This product can provide good chemical and solvent resistance and improve weather stability. It is most commonly used in architectural powder coating, coil coating, baking paints, water-based paints, and industrial coating applications. 收起 | |
| Cinilex® DPP Red SR2P | CINIC Chemicals (Shanghai) Co., Ltd. | Cinilex® DPP Red SR2P is a high strength, highly resistant mid shade red organic pigment. This product can improve overpainting resistance and heat stability of the coatings. It is most commonly used in water based decorative coatings, powder coatings, an...展开 Cinilex® DPP Red SR2P is a high strength, highly resistant mid shade red organic pigment. This product can improve overpainting resistance and heat stability of the coatings. It is most commonly used in water based decorative coatings, powder coatings, and industrial coating applications. 收起 | |
| Cinilex® DPP Red ST | CINIC Chemicals (Shanghai) Co., Ltd. | Cinilex® DPP Red ST is an extremely transparent and saturated, high strength DPP based mid shade red organic pigment. This product can be used in conjunction with mica and aluminium pigments. It is most commonly used in car refinish applications, baking p...展开 Cinilex® DPP Red ST is an extremely transparent and saturated, high strength DPP based mid shade red organic pigment. This product can be used in conjunction with mica and aluminium pigments. It is most commonly used in car refinish applications, baking paints, nitrocellulose paints, and water-based paints. 收起 | |
| Cinilex® DPP Rubine SR5H | CINIC Chemicals (Shanghai) Co., Ltd. | Cinilex® DPP Rubine SR5H is a highly opaque, bluish red pigment. This product can provide outstanding light, weather, heat, overpainting and solvent resistance. It is most commonly used in baking paints, acid cured paints, water based paints, and coating ...展开 Cinilex® DPP Rubine SR5H is a highly opaque, bluish red pigment. This product can provide outstanding light, weather, heat, overpainting and solvent resistance. It is most commonly used in baking paints, acid cured paints, water based paints, and coating applications. 收起 | |
| Cinilex® DPP Rubine SR6T | CINIC Chemicals (Shanghai) Co., Ltd. | Cinilex® DPP Rubine SR6T is a transparent and saturated, highly weather resistant, DPP based blue shade red organic pigment. This product can be used in conjunction with mica and aluminium pigments. It is most commonly used in automotive OEM, car refinish...展开 Cinilex® DPP Rubine SR6T is a transparent and saturated, highly weather resistant, DPP based blue shade red organic pigment. This product can be used in conjunction with mica and aluminium pigments. It is most commonly used in automotive OEM, car refinish and commercial transportation applications. 收起 | |
| Cinilex® Red SR3C | CINIC Chemicals (Shanghai) Co., Ltd. | Cinilex® Red SR3C is a highly transparent, bluish red pigment. This product is most commonly used in automotive OEM, car refinish, and powder coating applications. | |
| Cinilex® Red SR4C | CINIC Chemicals (Shanghai) Co., Ltd. | Cinilex® Red SR4C is a highly transparent blush red pigment. This product can be used in conjunction with pearlescent and mica pigments. It is most commonly used in industrial coating and motorcycle paint applications. | |
| Cinilex® Yellow SY1H | CINIC Chemicals (Shanghai) Co., Ltd. | Cinilex® Yellow SY1H is a weather resistant, high performance, red shade organic yellow pigment. This product maintains its outstanding performance in highly reduced shades with titanium dioxide or other inorganic pigments. It is most commonly used in ind...展开 Cinilex® Yellow SY1H is a weather resistant, high performance, red shade organic yellow pigment. This product maintains its outstanding performance in highly reduced shades with titanium dioxide or other inorganic pigments. It is most commonly used in industrial, powder, decorative, automotive, and coil coating applications. 收起 | |
| Cinilex® Yellow SY2T | CINIC Chemicals (Shanghai) Co., Ltd. | Cinilex® Yellow SY2T is a transparent, weather resistant, isoindolinone based red shade yellow organic pigment. This product can be used in conjunction with mica and aluminium pigments. It is most commonly used in automotive OEM and car refinish applicati...展开 Cinilex® Yellow SY2T is a transparent, weather resistant, isoindolinone based red shade yellow organic pigment. This product can be used in conjunction with mica and aluminium pigments. It is most commonly used in automotive OEM and car refinish applications. 收起 | |
| Dehydran® P 3615 | BASF Formulation Additives 巴斯夫配方助剂 | 基于烷基聚醚和改性脂肪族化合物的乳液配方用抑泡消泡剂。 | |
| Di Isopropyl Ether | Arrow Chemical Group Qingdao Aspirit Chemical Co Ltd. | Di Isopropyl Ether is an organic compound with the formula C6H14O. It has multiple applications for use in the production of solvents used in paints, waxes, dyes and resins such as paint thinners and stain removers. | |
| Dimethyl Carbonate | Arrow Chemical Group Qingdao Aspirit Chemical Co Ltd. | Dimethyl Carbonate is an organic compound with the formula C3H6O3. It has multiple applications for use in the production of; polycarbonates, pharmaceutical and pesticide, lithium battery electrolytes and as a solvent in paints, coatings and adhesives. | |
| DISPEX® AA 4030 | BASF Formulation Additives 巴斯夫配方助剂 | DISPEX® AA 4030 is an effective polymeric dispersing agent based on acrylic acid ammonium salt. | |
| DISPEX® AA 4135 NA | BASF Formulation Additives 巴斯夫配方助剂 | DISPEX® AA 4135 is an effective polymeric dispersing agent based on acrylic acid sodium salt. | |
| DISPEX® AA 4140 | BASF Formulation Additives 巴斯夫配方助剂 | DISPEX® AA 4140 is a derivative of a family of highly effective, low viscosity dispersing agents for water-borne coating systems. The product is especially suited for the dispersion of inorganic pigments. DISPEX® AA 4140 is a solution of a sodium salt of ...展开 DISPEX® AA 4140 is a derivative of a family of highly effective, low viscosity dispersing agents for water-borne coating systems. The product is especially suited for the dispersion of inorganic pigments. DISPEX® AA 4140 is a solution of a sodium salt of an acrylic polymer in water. This straw colored liquid is effective over a pH range 5-12 and up to temperatures in excess of 100°C. Compared with inorganic dispersing agents, e.g. polyphosphate products, the organic polymer based DISPEX® N40 provides improved storage stability of both the pigment dispersion and the formulated paint. There is little or no adverse reaction to high temperatures or pH changes. 收起 | |
| Dispex® AA S 760 | BASF Formulation Additives 巴斯夫配方助剂 | 水性颜料的分散剂，和聚乙烯丙烯酸，聚乙烯丙烯酸酯，苯乙烯丁二烯和它们的共聚物相容 | |
| Dispex® AA S040 | BASF Formulation Additives 巴斯夫配方助剂 | 用于水性颜填料、色浆及制陶业的润湿分散剂。 | |
| DISPEX® CX 4230 | BASF Formulation Additives 巴斯夫配方助剂 | DISPEX® CX 4230 is a low VOC, low odor hydrophobic dispersant for interior and exterior architectural coatings. It is used to disperse titanium dioxide and extender pigments. It is added levels ranging from 1.05 to 3.0% based on pigment solids. | |
| Dispex® CX 4231 | BASF Formulation Additives 巴斯夫配方助剂 | Dispex® CX 4231 (以前的Ultradispers® AB 30)是一种羧酸共聚物的多铵盐。它具有显著的憎水性，可减少拖尾和吸水性 | |
| Dispex® CX 4234 | BASF Formulation Additives 巴斯夫配方助剂 | 用于内外墙建筑涂料的疏水性分散剂。 | |
| DISPEX® CX 4240 | BASF Formulation Additives 巴斯夫配方助剂 | DISPEX® CX 4240 is a highly effective, low viscosity dispersing agent for water-borne coating systems. It is especially suited for the dispersion of inorganic pigments. This straw colored liquid is a solution of an ammonium salt of an acrylic copolymer in...展开 DISPEX® CX 4240 is a highly effective, low viscosity dispersing agent for water-borne coating systems. It is especially suited for the dispersion of inorganic pigments. This straw colored liquid is a solution of an ammonium salt of an acrylic copolymer in water. The copolymer is manufactured to a relatively narrow molecular weight distribution thus resulting in a consistent product quality with maximum effectiveness. The special copolymer backbone is designed for complete compatibility with polypropylene and hexylene glycols used in high proportions in water-borne high gloss coatings to promote wet edge time. 收起 | |
| DISPEX® CX 4320 | BASF Formulation Additives 巴斯夫配方助剂 | DISPEX® CX 4320 is a particularly effective dispersing agent for dispersing inorganic fillers and pigments. It improves wet scrub and blocking resistance. It is a sodium salt of a carboxylic acid polymer in water and is particularly effective for dispersi...展开 DISPEX® CX 4320 is a particularly effective dispersing agent for dispersing inorganic fillers and pigments. It improves wet scrub and blocking resistance. It is a sodium salt of a carboxylic acid polymer in water and is particularly effective for dispersing inorganic fillers and pigments in high gloss, semi-gloss and highly filled interior paints. It also improves wet-scrub resistance, blocking resistance and has excellent ZnO-compatibility. 收起 | |
| DISPEX® CX 4340 | BASF Formulation Additives 巴斯夫配方助剂 | DISPEX® CX 4340 is a highly effective, low viscosity dispersing agent for water-borne coating systems. It is especially suited for the dispersion of inorganic pigments. This straw colored liquid is a solution of a sodium salt of an acrylic copolymer in wa...展开 DISPEX® CX 4340 is a highly effective, low viscosity dispersing agent for water-borne coating systems. It is especially suited for the dispersion of inorganic pigments. This straw colored liquid is a solution of a sodium salt of an acrylic copolymer in water. The copolymer is manufactured to a relatively narrow molecular weight distribution thus resulting in a consistent product quality with maximum effectiveness. The special copolymer backbone is designed for complete compatibility with polypropylene and hexylene glycols used in high proportions in water-borne high gloss coatings to promote wet edge time. 收起 | |
| Dispex® CX 4345 | BASF Formulation Additives 巴斯夫配方助剂 | Dispex® CX 4345 (以前的Ultradispers® MD 21)是一种高效羧酸共聚物的多钠盐的水溶液。它的憎水性可大大改善其耐湿擦洗性 | |
| DISPEX® CX 4910 | BASF Formulation Additives 巴斯夫配方助剂 | DISPEX® CX 4910 is a highly effective dispersing agent for systems, which are supplied as ‘dry systems’ and require addition of water for activation prior to their use. Typical applications examples are plasters, wall finishes, cement and tile adhesives. ...展开 DISPEX® CX 4910 is a highly effective dispersing agent for systems, which are supplied as ‘dry systems’ and require addition of water for activation prior to their use. Typical applications examples are plasters, wall finishes, cement and tile adhesives. DISPEX® CX 4910 is a sodium salt of an acrylic polymer. For the production of systems, traded as ‘dry systems’, DISPEX® CX 4910 is typically incorporated into the dry powder mix by a normal dry blending operation. Upon wetting of such a ‘dry system’ a waterbased paste/slurry is generated. DISPEX® CX 4910 is effective over a pH range 5-12 and up to temperatures in excess of 100°C. 收起 | |
| Dispex® Ultra FA 4401 | BASF Formulation Additives 巴斯夫配方助剂 | Dispex® Ultra FA 4401 (formerly Pluracoat® Dispersal DA 120) is a non-ionic surfactant with excellent pigment wetting and dispersing properties. It is compatible with other nonionic, anionic, and cationic surfactants. | |
| DISPEX® Ultra FA 4404 | BASF Formulation Additives 巴斯夫配方助剂 | DISPEX® Ultra FA 4404 is a partially neutralized chelating agent suitable for use in the manufacture of pigment suspensions, emulsion paints, slurries, mainly inorganic pigments, viscosity reducer. It combines the properties of a chelating agent and polyp...展开 DISPEX® Ultra FA 4404 is a partially neutralized chelating agent suitable for use in the manufacture of pigment suspensions, emulsion paints, slurries, mainly inorganic pigments, viscosity reducer. It combines the properties of a chelating agent and polyphosphate with those of an organic dispersant thus yielding highly concentrated, stable and low-viscosity inorganic pigment suspensions, e. g. TiO2-slurries. 收起 | |
| DISPEX® Ultra FA 4416 | BASF Formulation Additives 巴斯夫配方助剂 | DISPEX® Ultra FA 4416 is a wetting and dispersing agent for aqueous coatings with high gloss, color strength and excellent rub-out properties. It is designed for aqueous top coats based on various binder types’ e.g. polyester solutions, polyacrylics, PUR-...展开 DISPEX® Ultra FA 4416 is a wetting and dispersing agent for aqueous coatings with high gloss, color strength and excellent rub-out properties. It is designed for aqueous top coats based on various binder types’ e.g. polyester solutions, polyacrylics, PUR-emulsions. With its excellent wetting properties, DISPEX® Ultra FA 4416 when used with inorganic and organic pigments produces a high gloss and good color development in low and co-solvent free systems. DISPEX® Ultra FA 4416 prevents rub-out effects by using critical pigment combinations, e.g. titanium dioxide / phthalo blue. It is suitable for air and oven drying coatings as well as baking coatings. Since DISPEX® Ultra FA 4416 has no effect on pot-life it is also recommended for aqueous 2 pack PUR coatings. It allows the formulation of economical inorganic slurries and pigment concentrates for emulsion paints and consumer coatings. Here it combines the advantages of a low paste-viscosity with anti-settling characteristics and excellent compatibility to all types of aqueous base-paints. 收起 | |
| DISPEX® Ultra FA 4420 | BASF Formulation Additives 巴斯夫配方助剂 | DISPEX® Ultra FA 4420 is a fatty acid modified polyester that stabilizes inorganic and organic pigments in water and solvents. It provides maximum color development, higher pigment loading and optimum color acceptance. This product is used for universal c...展开 DISPEX® Ultra FA 4420 is a fatty acid modified polyester that stabilizes inorganic and organic pigments in water and solvents. It provides maximum color development, higher pigment loading and optimum color acceptance. This product is used for universal colorants for decorative paints. When using universal colorants in decorative paints, the addition of DISPEX® Ultra FA 4420 to the base paints (water and solvent) can increase compatibility and color acceptance and prevents de-wetting of the colorants. DISPEX® Ultra FA 4420 is an activator for Bentonites as well as for associated and acrylic thickeners. 收起 | |
| DISPEX® Ultra FA 4425 | BASF Formulation Additives 巴斯夫配方助剂 | DISPEX® Ultra FA 4425 stabilizes all kinds of pigments and extenders in water- and solvent-based systems, especially in decorative coatings. In addition it makes polar ingredients of universal colorants more compatible with non-polar solvent-based paints ...展开 DISPEX® Ultra FA 4425 stabilizes all kinds of pigments and extenders in water- and solvent-based systems, especially in decorative coatings. In addition it makes polar ingredients of universal colorants more compatible with non-polar solvent-based paints into which they may be incorporated. This results in: maximum color development of the colorant based on DISPEX® Ultra FA 4425, optimum color acceptance of universal colorants in base-paints, and higher pigment loading in colorants. DISPEX® Ultra FA 4425, used as a single wetting and dispersing agent, is considered suitable for VOC-free applications, particularly universal colorants. When using universal colorants in decorative paints, the addition of DISPEX® Ultra FA 4425 to the base paints (water and solvent) can increase compatibility and color acceptance, especially in water-based and ultra-low aromatic content decorative paints. 收起 | |
| Dispex® Ultra FA 4430 | BASF Formulation Additives 巴斯夫配方助剂 | Dispex® Ultra FA 4430 (以前的Lumiten® N-OC 30) 是一种非离子型表面活性剂，可用于改善乳胶漆的储存稳定性及其与水泥和石灰的相容性 | |
| DISPEX® Ultra FA 4431 | BASF Formulation Additives 巴斯夫配方助剂 | DISPEX® Ultra FA 4431 is a wetting and dispersing agent for inorganic pigments and fillers in solventbased, solvent-free and water-based systems. It can be used in all solvent-based and solvent-free industrial and decorative coating systems. It is especia...展开 DISPEX® Ultra FA 4431 is a wetting and dispersing agent for inorganic pigments and fillers in solventbased, solvent-free and water-based systems. It can be used in all solvent-based and solvent-free industrial and decorative coating systems. It is especially suitable for wetting, dispersion and stabilization of inorganic pigments and fillers in solvent-free epoxy and polyurethane systems, like flooring or pipe-line coatings. DISPEX® Ultra FA 4431 can also be used to decrease the viscosity of water-based resin-free inorganic pigment concentrates, based on high molecular weight dispersing agents like DISPEX® Ultra PA 4550. In addition DISPEX® Ultra FA 4431 is suitable for dispersion and stabilization of inorganic pigments and fillers in water-based decorative paints based on acrylic emulsions, achieving a better rheology and improved gloss. 收起 | |
| DISPEX® Ultra FA 4437 | BASF Formulation Additives 巴斯夫配方助剂 | DISPEX® Ultra FA 4437 is a silicone-free surface active flow additive and colour acceptance improver for aqueous systems based on emulsions and aqueous resins. Due to its good wetting properties DISPEX® Ultra FA 4437 ensures better wetting of difficult-to...展开 DISPEX® Ultra FA 4437 is a silicone-free surface active flow additive and colour acceptance improver for aqueous systems based on emulsions and aqueous resins. Due to its good wetting properties DISPEX® Ultra FA 4437 ensures better wetting of difficult-to-wet substrates. The emulsifying effect of this product also prevents surface defects such as craters, fisheyes, pinholes and streaks caused by incompatible components. Furthermore, DISPEX® Ultra FA 4437 has a strong affinity to pigment surfaces thereby reducing color acceptance problems. 收起 | |
| DISPEX® Ultra FA 4480 | BASF Formulation Additives 巴斯夫配方助剂 | DISPEX® Ultra FA 4480 is a wetting a dispersing agent with excellent pigment wetting properties for coatings and aqueous pigment pastes. It shows excellent wetting and dispersing properties in aqueous, binder and solvent-free pigment pastes. DISPEX® Ultra...展开 DISPEX® Ultra FA 4480 is a wetting a dispersing agent with excellent pigment wetting properties for coatings and aqueous pigment pastes. It shows excellent wetting and dispersing properties in aqueous, binder and solvent-free pigment pastes. DISPEX® Ultra FA 4480 also provides outstanding flow properties even at high pigment load. In topcoats based on different binder types DISPEX® Ultra FA 4480 improves pigment wetting and therefore increases gloss and color intensity of the paint, especially in combination with organic pigments. This product also shows excellent results in waterbased alkyds, polyester resins as also in aqueous polyurethane emulsions. 收起 | |
| Dispex® Ultra FA 4483 | BASF Formulation Additives 巴斯夫配方助剂 | 无机颜料分散剂和乳胶制备的稳定表面活性剂 | |
| DISPEX® Ultra PA 4503 | BASF Formulation Additives 巴斯夫配方助剂 | DISPEX® Ultra PA 4503 is a dispersing resin with self-emulsifying properties. In combination with DISPEX® Ultra PA 4503, it is suitable for the production of VOC free pigment concentrates. The excellent compatibility of this combination with both water- a...展开 DISPEX® Ultra PA 4503 is a dispersing resin with self-emulsifying properties. In combination with DISPEX® Ultra PA 4503, it is suitable for the production of VOC free pigment concentrates. The excellent compatibility of this combination with both water- and solvent-based decorative paint systems means these concentrates are suitable for the production of tinting systems where only low shear forces (shaking machines) are used. The chemical character of DISPEX® Ultra PA 4503 makes it suitable for systems with a wide pH range (5–12). 收起 | |
| Dispex® Ultra PA 4516 | BASF Formulation Additives 巴斯夫配方助剂 | 开发作为颜料研磨树脂，用于水性油墨。可作为单一树脂组分用于颜料研磨基料，该基料随后可用作开稀阶段使用其他担体的水性油墨基底 | |
| DISPEX® Ultra PA 4550 | BASF Formulation Additives 巴斯夫配方助剂 | DISPEX® Ultra PA 4550 is a modified polyacrylate that stabilizes the pigment dispersion of inorganic and organic pigments and improves gloss, color strength, flocculation stability, and anti-flooding behavior. This product is used as a dispersing agent. D...展开 DISPEX® Ultra PA 4550 is a modified polyacrylate that stabilizes the pigment dispersion of inorganic and organic pigments and improves gloss, color strength, flocculation stability, and anti-flooding behavior. This product is used as a dispersing agent. DISPEX® Ultra PA 4550 is pH-independent and has a broad compatibility in most commonly used water-based coatings. It is completely water-soluble and does not need to be neutralized. 收起 | |
| DISPEX® Ultra PA 4560 | BASF Formulation Additives 巴斯夫配方助剂 | DISPEX® Ultra PA 4560 is a modified polyacrylate that is pH-independent and has a wide-spread compatibility in most commonly used waterborne decorative coatings. It provides improved gloss, color strength, flocculation stability and anti-flooding behavior...展开 DISPEX® Ultra PA 4560 is a modified polyacrylate that is pH-independent and has a wide-spread compatibility in most commonly used waterborne decorative coatings. It provides improved gloss, color strength, flocculation stability and anti-flooding behavior. DISPEX® Ultra PA 4560 is, in combination with DISPEX® Ultra PA 4503, suitable to formulate VOC-free tinting concentrates for both water- and solvent-based decorative paints. These concentrates have excellent compatibility and can therefore be incorporated by the use of low shear forces (shaking machines). 收起 | |
| Dispex® Ultra PA 4580 | BASF Formulation Additives 巴斯夫配方助剂 | 稳定有机颜料和无机颜料，在色浆中有强降黏效果，提高光泽，防止浮色和发花，提高颜料着色力，抗絮凝 | |
| Dispex® Ultra PA 4590 | BASF Formulation Additives 巴斯夫配方助剂 | 经济型高分子分散剂，用于各类水性工业涂料和颜料色浆中 | |
| DISPEX® Ultra PX 4275 | BASF Formulation Additives 巴斯夫配方助剂 | DISPEX® Ultra PX 4275 is a polymeric wetting and dispersing agent for high quality aqueous coatings and pigment pastes. It is suitable for air and oven dried coatings. Since DISPEX® Ultra PX 4275 has no effect on pot-life it is recommended for aqueous 2 p...展开 DISPEX® Ultra PX 4275 is a polymeric wetting and dispersing agent for high quality aqueous coatings and pigment pastes. It is suitable for air and oven dried coatings. Since DISPEX® Ultra PX 4275 has no effect on pot-life it is recommended for aqueous 2 pack PUR coating. This product has a low foaming tendency and to the best of our knowledge has no negative influence on the water and corrosion resistance. DISPEX® Ultra PX 4275 is used in combination with zinc oxid, an increase of viscosity may occur. 收起 | |
| DISPEX® Ultra PX 4575 | BASF Formulation Additives 巴斯夫配方助剂 | DISPEX® Ultra PX 4575 is a water-based dispersant made by Controlled Free Radical Polymerization (CFRP). This technology allows the synthesis of polymeric dispersants with highly defined polymer architecture and a low poly-dispersity index. DISPEX® Ultra ...展开 DISPEX® Ultra PX 4575 is a water-based dispersant made by Controlled Free Radical Polymerization (CFRP). This technology allows the synthesis of polymeric dispersants with highly defined polymer architecture and a low poly-dispersity index. DISPEX® Ultra PX 4575 is especially suited for the dispersion of pigments in waterborne coatings and colorants. 收起 | |
| DISPEX® Ultra PX 4585 | BASF Formulation Additives 巴斯夫配方助剂 | DISPEX® Ultra PX 4585 is a waterborne dispersant of the acrylate block copolymer family of products made by controlled free radical polymerization (CFRP). This technology allows formulating polymeric dispersants with defined polymer architecture and a low...展开 DISPEX® Ultra PX 4585 is a waterborne dispersant of the acrylate block copolymer family of products made by controlled free radical polymerization (CFRP). This technology allows formulating polymeric dispersants with defined polymer architecture and a low poly-dispersity index. DISPEX® Ultra PX 4585 is especially suited for the dispersion of pigments in water-based coatings. DISPEX® Ultra PX 4585 offers high efficiency in stabilizing pigments and demonstrates wide compatibility with many water-based resin systems. This makes DISPEX® Ultra PX 4585 ideally suited for the use of the concept of resin-free pigment concentrates (RFPC). 收起 | |
| EcoFlame APP201 | Unibrom Corp. | EcoFlame APP201 is a white fine particle ammonium polyphosphate that is largely insoluble in water, completely insoluble in organic solvent, and is non-flammable and non-hygroscopic. It can be used in sealants and adhesives, polyurethane foam (PU rigid, f...展开 EcoFlame APP201 is a white fine particle ammonium polyphosphate that is largely insoluble in water, completely insoluble in organic solvent, and is non-flammable and non-hygroscopic. It can be used in sealants and adhesives, polyurethane foam (PU rigid, flexible, and rigid integral skin foam), intumescent coatings, cellulose-containing material, and in thermoplastics (PP): where it can be used in casting resin based on unsaturated PET resin and epoxy resin. EcoFlame APP201 has a molecular weight of n>1000, a pH value of 5.5 to 7.0, a density of 1.9 kg/L at 25°C, an apparent density of 0.7 kg/L, and an average particle size equal to or less than 15 um. 收起 | |
| EcoFlame APP202 | Unibrom Corp. | EcoFlame APP202 is a white fine particle ammonium polyphosphate that is largely insoluble in water, completely insoluble in organic solvent, and is non-flammable and non-hygroscopic. It can be used in sealants and adhesives, polyurethane foam (PU rigid, f...展开 EcoFlame APP202 is a white fine particle ammonium polyphosphate that is largely insoluble in water, completely insoluble in organic solvent, and is non-flammable and non-hygroscopic. It can be used in sealants and adhesives, polyurethane foam (PU rigid, flexible, and rigid integral skin foam), intumescent coatings, cellulose-containing material, and in thermoplastics (PP): where it can be used in casting resin based on unsaturated PET resin and epoxy resin. EcoFlame APP202 can also be used in favorably in intumescent coating for exterior applications where the ammonium polyphosphate is essential to have tremendously low water solubility, in cellulose-containing materials (car’s fireproof cloth, military cellulose materials, paper, and wood), and in numerous polymers for exterior applications. It has a molecular weight of n>1000, a pH value of 6.5 to 7.5, a density of 1.9 kg/L at 25°C, an apparent density of 0.7 kg/L, and an average particle size equal to or less than 15 um. 收起 | |
| EcoFlame APP203 | Unibrom Corp. | EcoFlame APP203 is a white fine particle ammonium polyphosphate that is largely insoluble in water, completely insoluble in organic solvent, and is non-flammable and non-hygroscopic. It can be used in sealants and adhesives, polyurethane foam (PU rigid, f...展开 EcoFlame APP203 is a white fine particle ammonium polyphosphate that is largely insoluble in water, completely insoluble in organic solvent, and is non-flammable and non-hygroscopic. It can be used in sealants and adhesives, polyurethane foam (PU rigid, flexible, and rigid integral skin foam), intumescent coatings, cellulose-containing material, and in thermoplastics (PP): where it can be used in casting resin based on unsaturated PET resin and epoxy resin. EcoFlame APP203 is also appropriate as acid donor for intumescent coatings and PU foams. It has a molecular weight of n>1000, a pH value of 7.5 to 8.5, a density of 1.9 kg/L at 25°C, an apparent density of 0.7 kg/L, and an average particle size equal to or less than 15 um. 收起 | |
| EcoFlame APP204 | Unibrom Corp. | EcoFlame APP204 is a white fine particle ammonium polyphosphate that is largely insoluble in water, completely insoluble in organic solvent, and is non-flammable and non-hygroscopic. It can be used in sealants and adhesives, polyurethane foam (PU rigid, f...展开 EcoFlame APP204 is a white fine particle ammonium polyphosphate that is largely insoluble in water, completely insoluble in organic solvent, and is non-flammable and non-hygroscopic. It can be used in sealants and adhesives, polyurethane foam (PU rigid, flexible, and rigid integral skin foam), intumescent coatings, cellulose-containing material, and in thermoplastics (PP): where it can be used in casting resin based on unsaturated PET resin and epoxy resin. EcoFlame APP204 can be also be favorably used in solvent radical intumescent coatings and in thermoplastics. It has a molecular weight of n>1000, a pH value of 6.5 to 7.5, a density of 1.9 kg/L at 25°C, an apparent density of 0.7 kg/L, and an average particle size equal to or less than 15 um. 收起 | |
| EcoFlame APP205 | Unibrom Corp. | EcoFlame APP205 is a white fine particle ammonium polyphosphate that is used in a range of polyethylene, polyolefin blends, thermoplastics, polypropylene, ethylene/vinyl acetate copolymers, coating compounds, hot melt adhesives, and is suitable for both i...展开 EcoFlame APP205 is a white fine particle ammonium polyphosphate that is used in a range of polyethylene, polyolefin blends, thermoplastics, polypropylene, ethylene/vinyl acetate copolymers, coating compounds, hot melt adhesives, and is suitable for both injection molding and extrusion applications. EcoFlame APP205 has a molecular weight of n>1000, a pH value of 6.0 to 8.5, a density of 1.8 kg/L at 25°C, an apparent density of 0.45 kg/L, and an average particle size equal to or less than 16 um. 收起 | |
| EcoFlame B-543 | Unibrom Corp. | EcoFlame B-543, a white powder with the chemical name of Tetrabromobisphenol A, is a brominated aromatic flame retardant used in thermoset and thermoplastic resin systems and generally used in the manufacture of flame retardant printed circuit boards, fou...展开 EcoFlame B-543, a white powder with the chemical name of Tetrabromobisphenol A, is a brominated aromatic flame retardant used in thermoset and thermoplastic resin systems and generally used in the manufacture of flame retardant printed circuit boards, found in most electrical appliances. It is also used as an intermediate, to make other flame retardants, and brominated carbon/carbonate oligomers (that use TBBA as a raw material) are used to flame retard thermoplastic resin systems such as certain grades of polycarbonate (PC) and polybutylene terephthalate (PBT). EcoFlame B-543 has a molecular weight of 543.7, a moisture percent of 0.2 max, a melting point of 179 min, and an organic bromide of 58 min. 收起 | |
| EcoFlame B-641 | Unibrom Corp. | EcoFlame B-641, a white powder/granular form with the chemical name of Hexabromocyclodeodecane, is an additive flame retardant used in a wide range of textiles, coatings, adhesives, and plastics. It has high aliphatic bromine content, resulting in minimum...展开 EcoFlame B-641, a white powder/granular form with the chemical name of Hexabromocyclodeodecane, is an additive flame retardant used in a wide range of textiles, coatings, adhesives, and plastics. It has high aliphatic bromine content, resulting in minimum effect on polymer physical properties and lower loading, and is also recommended for styrene based systems such as extruded and expanded polystyrene foams. EcoFlame B-641 has a molecular weight of 641.7, a bromine content of 74% min, a melting point of 180 min, particle size of 95% with 80 mesh passed, and a purity of 99% min. 收起 | |
| EcoFlame B-641TC | Unibrom Corp. | EcoFlame B-641TC, a white powder/granular form with the chemical name of Hexabromocyclodeodecane, is an additive flame retardant used in a wide range of textiles, coatings, adhesives, and plastics. It has high aliphatic bromine content, resulting in minim...展开 EcoFlame B-641TC, a white powder/granular form with the chemical name of Hexabromocyclodeodecane, is an additive flame retardant used in a wide range of textiles, coatings, adhesives, and plastics. It has high aliphatic bromine content, resulting in minimum effect on polymer physical properties and lower loading, and is tailor-made for coating and textile fields with disperse-ability and flow-ability. EcoFlame B-641TC has a varying particle size of 1-2, 3-5, and 7-13, it also has a molecular weight of 641.7, a bromine content of 74% min, a melting point of 180 min, and a purity of 99% min. 收起 | |
| EcoFlame B-680 | Unibrom Corp. | EcoFlame B-680, a white to off-white crystalline powder/granular form with the chemical name of 1,2 –bis (2,4,6-tribromophenoxy)ethane, is a flame retardant of ABS, elastomers, textiles, unsaturated polyesters, HIPS, Polycarbonate, adhesives, thermoplasti...展开 EcoFlame B-680, a white to off-white crystalline powder/granular form with the chemical name of 1,2 –bis (2,4,6-tribromophenoxy)ethane, is a flame retardant of ABS, elastomers, textiles, unsaturated polyesters, HIPS, Polycarbonate, adhesives, thermoplastic, and coatings. It is especially efficient for applications in which thermal stability at high processing temperatures is important. EcoFlame B-680 has a molecular weight of 688, a melting point of 220 min, and bromine of 70 min. 收起 | |
| EcoFlame B-959 | Unibrom Corp. | EcoFlame B-959, a white powder with the chemical name of decabromodiphenyl oxide, is a flame retardant additive that offers a solution to flame retardant formulations in a wide range of applications and with bromine content. It is used in wire & cable, bu...展开 EcoFlame B-959, a white powder with the chemical name of decabromodiphenyl oxide, is a flame retardant additive that offers a solution to flame retardant formulations in a wide range of applications and with bromine content. It is used in wire & cable, business machines and television cabinet formulations, elastomers, and is predominantly effective in styrenic, HIPS, polyester resins, polyamide, and polyolefins. EcoFlame B-959 is available with an average particle size of 3 um max or 6 um max, a melting point of 300 min (for the 3 um particle size) and 304.4 to 309.7 min (for the 6 um max particle size, iron content of 10 mg/kg max, an organic bromide of 82% min, a molecular weight of 959.2, and an aluminum content of 30 mg/kg max. 收起 | |
| Efka® 3650 N | BASF Formulation Additives 巴斯夫配方助剂 | Efka® 3650 N可降低有机涂料体系的表面张力。其良好的相容性使之可有效防缩孔并提供流平控制。它的物理状态为浅黄色液体。Efka® 3650 N尤其适合用于基于醇酸的烤瓷漆、丙烯酸或聚酯树脂、聚氨酯涂料，双组份环氧涂料和自干醇酸体系 | |
| EFKA® FA 4600 | BASF Formulation Additives 巴斯夫配方助剂 | EFKA® FA 4600 is an antisettling agent for non-aqueous paints. As a modern anti-settling agent, it acts via adsorption phenomena on the pigment surface and effectively prevents pigments from settling and forming hard, difficult-to-stir sediments even in l...展开 EFKA® FA 4600 is an antisettling agent for non-aqueous paints. As a modern anti-settling agent, it acts via adsorption phenomena on the pigment surface and effectively prevents pigments from settling and forming hard, difficult-to-stir sediments even in low-viscosity coatings such as, e.g., dipping paints and wash-primers. This is possible even in the presence of specific high density pigments based on lead, chrome, barium, iron and titanium. In addition, the uniform electrostatic charge imparted by EFKA® FA 4600 prevents re-agglomeration thereby counteracting any premature settling of the pigments. EFKA® FA 4600 is an easy to use liquid anti-settling agent, the particular advantage of which is that it is effective over a broad range of polarity. It can, therefore, be used in a nitrocellulose lacquer, the solvents of which are mainly polar, as well as in decorative paints which only contain white spirit, i.e., a non-polar solvent. EFKA® FA 4600 is also an excellent anti-settling agent for low-viscosity printing inks, e.g., flexographic and gravure. In particular it counteracts the tendency of inorganic pigments to settle. 收起 | |
| EFKA® FA 4601 | BASF Formulation Additives 巴斯夫配方助剂 | EFKA® FA 4601 is an anti-settling agent for non-aqueous paint systems. It has been used with great success for years in the paint industry as a special agent for preventing sedimentation. EFKA® FA 4601 was developed as a result of detailed studies regardi...展开 EFKA® FA 4601 is an anti-settling agent for non-aqueous paint systems. It has been used with great success for years in the paint industry as a special agent for preventing sedimentation. EFKA® FA 4601 was developed as a result of detailed studies regarding interfacial activity. The mode of action of EFKA® FA 4601 systems results from the high surface activity of its constituents with almost all pigments. If processed properly, the individual pigment particles are coated with a monomolecular layer of adsorbed compounds which prevent agglomeration into larger particles, with the result that the fine particles remain in suspension and no caking occurs. This viscous liquid is a blend of selected fatty alcohol sulfates. EFKA® FA 4601 does not contain any alkali ions, and it is effective in most paints, provided they are not distinctly polar in their composition. 收起 |
