| SCHWEGO FOAM EL 2013 | Bernd Schwegmann GmbH & Co. KG | SCHWEGO FOAM EL 2013是一种用于溶剂型涂料系统的消泡剂。它可以减少表面张力，所以可以在多数溶剂型系统中显示高消泡能力。它可以在生产和应用过程中破坏泡沫。小量使用SCHWEGO FOAM EL 2013就可以防止泡沫在烤瓷和烘漆过程中产生。这款产品几乎适用于所有溶剂型系统，罐头涂料，醇酸树脂（风干），醇酸树脂/聚酯（热烘干），氯化橡胶，环氧化物，聚氨酯，热塑性丙烯酸和反应性丙烯酸树脂系统。 | |
| SCHWEGO® Mar 6542 | Bernd Schwegmann GmbH & Co. KG | 滑爽助剂，用于水性和UV固化涂料体系，润湿助剂。可改善抗划伤、耐磨损性能和防粘连性能。也可改善滑爽度，形成平滑表面，从而提高涂膜硬度 | |
| SCHWEGO® Mar 6561 | Bernd Schwegmann GmbH & Co. KG | Schwego® Mar 6561添加剂，应用于UV涂料，可改善耐磨损和抗刮伤性能，增加防粘连性能，改进滑爽度并增加硬度。此外，可改善UV体系的相容性。可减少灰尘粘附和起泡倾向。Schwego® Mar 6561不会影响光泽 | |
| SCHWEGO® Mar 6562 | Bernd Schwegmann GmbH & Co. KG | Schwego® Mar 6562添加剂，应用于UV涂料，可改善耐磨损和抗刮伤性能，增加防粘连性能，改进滑爽度并增加硬度。此外，可改善UV体系的相容性，增加重涂性。可减少灰尘粘附和起泡倾向。Schwego® Mar 6562不会影响光泽 | |
| SCHWEGO® Mar 8300 | Bernd Schwegmann GmbH & Co. KG | Schwego® Mar 8300主要用于常规自干和烘干漆。因为其组分，Schwego® Mar 8300可用于大部分基料体系。有时与含羟基的基料会不相容 | |
| SCHWEGO® Mar 8301 | Bernd Schwegmann GmbH & Co. KG | Schwego® Mar 8301主要用于自干和烘烤水稀释涂料。Schwego® Mar 8301在常规涂料体系中也具有良好的作用。因为其组分，Schwego® Mar 8301可用于大部分基料体系 | |
| SCHWEGO® Mar 8304 | Bernd Schwegmann GmbH & Co. KG | Schwego® Mar 8304适用于溶剂型体系，基料类型：自干醇酸、醇酸/三聚氰胺组合、聚氨酯、硝化纤维、酸固化三聚氰胺和尿素体系、无油聚酯 | |
| SCHWEGO® Mar 8305 | Bernd Schwegmann GmbH & Co. KG | Schwego® Mar 8305适用于水稀释体系，基料类型：自干醇酸、醇酸/三聚氰胺组合、自交联和添加剂交联聚丙烯酸树酯、聚氨酯、硝化纤维体系、酸硬化蜜胺和尿素树脂、无油聚酯 | |
| SCHWEGO® Mar 8310 | Bernd Schwegmann GmbH & Co. KG | 滑爽和流平助剂，用于水性涂料体系。可改善滑爽度，形成均一表面，从而提高涂膜硬度。可减小粘灰可能性，减小气泡形成，保持光泽 | |
| SCHWEGO® Mar 8311 | Bernd Schwegmann GmbH & Co. KG | SCHWEGO® Mar 8311 is a slip and leveling additive for solvent borne coating systems. The addition of this product to solvent borne coating systems improves scratch, mar and blocking resistance. SCHWEGO® Mar 8311 improves slip, therefore even surface is fo...展开 SCHWEGO® Mar 8311 is a slip and leveling additive for solvent borne coating systems. The addition of this product to solvent borne coating systems improves scratch, mar and blocking resistance. SCHWEGO® Mar 8311 improves slip, therefore even surface is formed and hence also film hardness increased. The tendency to dirt retention is diminished, disposition to foaming is reduced and gloss is conserved. 收起 | |
| SCHWEGO® Pur 8020 | Bernd Schwegmann GmbH & Co. KG | Schwego® Pur 8020适用于内墙和外墙涂料，也可用于基于聚丙烯酸、苯乙烯共聚物、PU乳液或水稀释醇酸体系的合成树脂打底和涂抹化合物或浆状填料。与丙烯酸或纤维素基增稠剂相比，它具有高保光性，尤其在高光乳胶漆中 | |
| SCHWEGO® Pur 8050 | Bernd Schwegmann GmbH & Co. KG | Schwego® Pur 8050适用于内部和外部砖石漆、水性涂料和防腐蚀涂料、改性树脂灰泥和填料。与丙烯酸和纤维素基增稠剂相比，它在高光乳胶漆中具有高保光性 | |
| SCHWEGO® therm | Bernd Schwegmann GmbH & Co. KG | SCHWEGO® therm 是一种用于溶剂型涂料体系的湿润添加剂。在涂料体系中添加这款产品可以在增加涂膜指甲硬度的同时减少烘干时间或者降低烘干温度等。SCHWEGO® therm提供更经济，更高质量的加工过程。这款产品可用于多种溶剂型系统，如金属饰面和木饰面。 | |
| SCHWEGO® Wett 6237 | Bernd Schwegmann GmbH & Co. KG | Schwego® Wett 6237可用于所有类型水稀释体系，例如：乳液、乳胶、混合体系、中和体系、适用于有机和无机颜料 | |
| SCHWEGO® Wett 6242 | Bernd Schwegmann GmbH & Co. KG | Schwego® Wett 6242可用于分散无机和有机颜料或炭黑。特别适用于通用色浆和高填充体系的制备 | |
| SCHWEGO® Wett 6246 | Bernd Schwegmann GmbH & Co. KG | Schwego® Wett 6246 是一款通用润湿和分散助剂，适用于溶剂基和不含树脂的体系。可以用于分散有机或无机颜料以及颜料浓缩浆。 | |
| SCHWEGO® Wett 6247 | Bernd Schwegmann GmbH & Co. KG | Schwego® Wett 6247 是一款通用润湿和分散助剂，适用于溶剂基和不含树脂的体系。可以用于分散有机或无机颜料以及颜料浓缩浆。 | |
| SCHWEGO® wett 6248 | Bernd Schwegmann GmbH & Co. KG | SCHWEGO® WETT 6248是一种润湿分散剂，用于溶剂型和不含树脂的体系。它适合有机和无机颜料以及颜料浓缩浆的分散。该产品可减少分散时间、色彩强度，减少沉降，并增加光泽度。它也可减少浮色，提高流平性，并具有出色的相容性。 SCHWEGO® WETT 6248特别适用于搪瓷和工业、木材、家具涂料和颜料预备物。推荐用于颜料预备物。 | |
| SCHWEGO® wett 6249 | Bernd Schwegmann GmbH & Co. KG | SCHWEGO® WETT 6249是一款通用润湿分散剂，用于溶剂型和不含树脂的体系。 SCHWEGO® WETT 6249适合有机和无机颜料以及颜料浓缩浆的分散。本产品特别适用于搪瓷和工业、木材、家具涂料和颜料预备物。推荐用于颜料预备物。 | |
| SCHWEGO® Wett 6260 | Bernd Schwegmann GmbH & Co. KG | Schwego® Wett 6260可用于分散无机和有机颜料或炭黑，特别适用于制备UV涂料 | |
| SCHWEGO® Wett 6264 | Bernd Schwegmann GmbH & Co. KG | 溶剂型涂料体系的润湿和分散助剂。可用于分散无机和有机颜料或炭黑。它尤其适合用于制备通用型浆体和高填料份体系 | |
| SCHWEGO® Wett 6267 | Bernd Schwegmann GmbH & Co. KG | 通用型润湿分散剂，用于溶剂型、无溶剂和无树脂体系。适合用于无机和有机颜料以及颜料浓缩物的分散 | |
| SCHWEGO® Wett 6290 | Bernd Schwegmann GmbH & Co. KG | Schwego® Wett 6290可用于高品质水稀释涂料体系中分散所有类型的无机和有机颜料。Schwego® Wett 6290特别适用于基于乙二醇的通用色浆或颜料色浆。Schwego® Wett 6290不会影响产品的耐腐蚀性能 | |
| SCHWEGO® Wett 6292 | Bernd Schwegmann GmbH & Co. KG | Schwego® Wett 6292可用于分散无机、有机颜料或炭黑。特别适用于制备通用色浆和高填充体系 | |
| SCHWEGO® Wett 6293 | Bernd Schwegmann GmbH & Co. KG | Schwego® Wett 6293是一款润湿和分散助剂。普遍适用于水性涂料体系的颜料分散。因为可以防止颜料结块因此提高了效率，大大缩短了球磨时间。同时，由于颜料的沉降和不良分散而导致的浮色发花也被避免。颜料颜色的强度提高，即使长期储存，色光也不会改变。 | |
| SCHWEGO® Wett 6294 | Bernd Schwegmann GmbH & Co. KG | 可控制涂料体系在颜料/基料界面的稳定性。在分散工艺中促进原始颗粒的形成，防止再聚集。具有出色的分散性能，适合用于高固含或高PVC体系中有机和无机颜料的分散 | |
| SCHWEGO® Wett 6295 | Bernd Schwegmann GmbH & Co. KG | 可控制涂料体系在颜料/基料界面的稳定性。在分散工艺中促进原始颗粒的形成，防止再聚集。具有出色的分散性能，适合用于高固体份或高PVC体系中有机和无机颜料的分散 | |
| SCHWEGO® Wett 6296 | Bernd Schwegmann GmbH & Co. KG | 可控制涂料体系在颜料/基料界面的稳定性。在分散工艺中促进原始颗粒的形成，防止再聚集。对白色和无机颜料具有出色的分散性能，适合用于填料分散 | |
| SCHWEGO® Wett 6297 | Bernd Schwegmann GmbH & Co. KG | Schwego® Wett 6297 是一款润湿和分散助剂。普遍适用于水性涂料体系的颜料分散。因为可以防止颜料结块因此提高了效率，大大缩短了球磨时间。同时，由于颜料的沉降和不良分散而导致的浮色发花也被避免。颜料颜色的强度提高，即使长期储存，色光也不会改变。 | |
| SCHWEGO® Wett 6298 | Bernd Schwegmann GmbH & Co. KG | Schwego® Wett 6298 是一款润湿和分散助剂。普遍适用于水性涂料体系的颜料分散。因为可以防止颜料结块因此提高了效率，缩短了球磨时间。同时，由于颜料的沉降和不良分散而导致的浮色发花也被避免。颜料颜色的强度提高，即使长期储存，色光也不会改变。 | |
| SCHWEGO® Wett 8075 | Bernd Schwegmann GmbH & Co. KG | Schwego® Wett 8075可用于常规和水稀释体系。Schwego® Wett 8075 适用于几乎所有类型的涂料 | |
| SCHWEGO® Wett 8076 | Bernd Schwegmann GmbH & Co. KG | Schwego® Wett 8076可添加到含溶剂或可用溶剂稀释的涂料体系。Schwego® Wett 8076不适用于水稀释体系 | |
| SCHWEGO® Wett 8079 | Bernd Schwegmann GmbH & Co. KG | Schwego® Wett 8079可用于高品质水稀释涂料体系中分散所有类型的无机和有机颜料。它适用于制备通用色浆 | |
| SCHWEGO® Wett 8081 | Bernd Schwegmann GmbH & Co. KG | 两种添加剂都适用于所有常规工业涂料。Schwego® Wett 8081尤其适用于醇酸、单组分环氧体系和颜料色浆。Schwego® Wett 8082非常适用于DD油漆和双组分环氧体系。它们通常不能用于自干丙烯酸。未见干扰其它油漆性能 | |
| SCHWEGO® Wett 8082 | Bernd Schwegmann GmbH & Co. KG | 两种助剂几乎适合所有常规工业涂料。Schwego® Wett 8081尤其适合醇酸树脂、单组份环氧体系和颜料浆体。Schwego® Wett 8082非常适合用于DD油漆和双组份环氧体系。它们通常不能用于自干丙烯酸。与油漆其它性能之间的相互影响尚不知晓 | |
| SCHWEGO® Wett 8083 | Bernd Schwegmann GmbH & Co. KG | Schwego® Wett 8083几乎适用于所有常规工业漆。特别适用于苯胺油墨。未见干扰其它油漆性能 | |
| SCHWEGO® Wett 8085 | Bernd Schwegmann GmbH & Co. KG | Schwego® Wett 8085 是一款乳化剂，能可观地改善通用色浆在溶剂基涂料体系的复配性。因此涂料的浮色、发花及絮凝现象可大大减少。该产品可以改善rub-out（指研法）,和大多数溶剂有很好地相容性。 | |
| SCHWEGO® Wett 8092 | Bernd Schwegmann GmbH & Co. KG | Schwego® Wett 8092可用于分散无机和有机颜料或炭黑。特别适用于制备通用色浆和高填充体系 | |
| SCHWEGO® Wett 8319 | Bernd Schwegmann GmbH & Co. KG | Schwego® Wett 8319适用于几乎所有类型的涂料。有时会发生不相容，但是极少见。Schwego® Wett 8319 可用于所有常规和水性涂料体系 | |
| SCHWEGO® Wett 8320 | Bernd Schwegmann GmbH & Co. KG | Schwego® Wett 8320作为颜料色浆的润湿剂和分散剂非常有效，水性，不含基料和溶液。Schwego® Wett 8320可优化流平性，即使是高着色体系也可。用于水性漆，可获得非常高的光泽和超高的着色力。用于水性醇酸、聚酯树脂和聚氨酯乳液效果特别好 | |
| SCHWEGO® Wett 8321 | Bernd Schwegmann GmbH & Co. KG | 该产品可用于几乎所有的水性快干漆体系，甚至自干清漆和烤漆。它易应用于水性双组分PUR体系，因为Schwego® Wett 8321不会影响储存时间。未见对其它油漆性能的负面影响 | |
| Scientific Boiled Linseed Oil | ADM | Scientific Boiled Linseed Oil, in the form of amber clear liquid, is a raw linseed oil with cobalt and manganese dryers with a specific gravity of 0.93 at 25°C. It has recommended applications in anti-spalling compounds and paints (drying time 6-16 hours)...展开 Scientific Boiled Linseed Oil, in the form of amber clear liquid, is a raw linseed oil with cobalt and manganese dryers with a specific gravity of 0.93 at 25°C. It has recommended applications in anti-spalling compounds and paints (drying time 6-16 hours). 收起 | |
| Scientific Double Boiled Linseed Oil | ADM | Scientific Double Boiled Linseed Oil, in the form of amber clear liquid, is a raw linseed oil with cobalt and manganese dryers with a specific gravity of 0.93 at 25°C. It has recommended applications in anti-spalling compounds, carbon electrodes, and pain...展开 Scientific Double Boiled Linseed Oil, in the form of amber clear liquid, is a raw linseed oil with cobalt and manganese dryers with a specific gravity of 0.93 at 25°C. It has recommended applications in anti-spalling compounds, carbon electrodes, and paints (drying time 8 hours). 收起 | |
| SILBIONE CAF 72576 RED | Elkem Silicones | SILBIONE CAF 72576 RED is a one component silicone rubber crosslinking at room temperature by reacting with the moisture in the air. These SILBIONE products contain reactive polydimethylsiloxane oils and inert fillers. The SILBIONE DISPERSIONS CAF 71550 a...展开 SILBIONE CAF 72576 RED is a one component silicone rubber crosslinking at room temperature by reacting with the moisture in the air. These SILBIONE products contain reactive polydimethylsiloxane oils and inert fillers. The SILBIONE DISPERSIONS CAF 71550 and 71528 are supplied as cyclohexane dispersions (70% solids). The SILBIONE DISPERSION CAF 71500G is supplied as cyclohexane dispersions (50% solids). The SILBIONE CAF 72576 is a 100% solids product. They can be used separately as non-stick coatings for materials in contact with foodstuffs. They can also be used in these applications in the form of a two-layer system which boosts their performance. The product obtained after crosslinking only contains substances that are in conformity with a number of Food Contact legislations. Contact BS for more detailed information. Important remarks: Manufacturers of paints, varnishes or coatings must naturally make sure that the other constituents in their formulas (solvents, pigments, additives, etc.) also comply with the regulations. They must also check that the coating obtained have been correctly applied, in particular to avoid any risk of migration of constituents. 收起 | |
| SILBIONE CAF 72589 | Elkem Silicones | SILBIONE CAF 72589 is a one component silicone elastomer, curing at room temperature on contact with atmospheric humidity, used to treat natural or agglomerated bottle corks. SILBIONE CAF 72589 is a solventless product based on reactive polymethyl siloxan...展开 SILBIONE CAF 72589 is a one component silicone elastomer, curing at room temperature on contact with atmospheric humidity, used to treat natural or agglomerated bottle corks. SILBIONE CAF 72589 is a solventless product based on reactive polymethyl siloxane oils and inert fillers. It can be used as a release coating for materials intended for food contact. 收起 | |
| SILBIONE DISPERSION CAF 70004 | Elkem Silicones | SILBIONE DISPERSION CAF 70004 is a one component silicone elastomer, curing at room temperature on contact with atmospheric humidity, used to treat agglomerated bottle corks and especially champagne corks. SILBIONE DISPERSION CAF 70004 is a product based ...展开 SILBIONE DISPERSION CAF 70004 is a one component silicone elastomer, curing at room temperature on contact with atmospheric humidity, used to treat agglomerated bottle corks and especially champagne corks. SILBIONE DISPERSION CAF 70004 is a product based on reactive polymethyl siloxane oils and inert fillers. It can be used as a release coating for materials intended for food contact. 收起 | |
| SILBIONE DISPERSION CAF 71500 GRY | Elkem Silicones | SILBIONE DISPERSION CAF 71500 GRY is a one component silicone rubber crosslinking at room temperature by reacting with the moisture in the air. These SILBIONE products contain reactive polydimethylsiloxane oils and inert fillers. The SILBIONE DISPERSIONS ...展开 SILBIONE DISPERSION CAF 71500 GRY is a one component silicone rubber crosslinking at room temperature by reacting with the moisture in the air. These SILBIONE products contain reactive polydimethylsiloxane oils and inert fillers. The SILBIONE DISPERSIONS CAF 71550 and 71528 are supplied as cyclohexane dispersions (70% solids). The SILBIONE DISPERSION CAF 71500G is supplied as cyclohexane dispersions (50% solids). The SILBIONE CAF 72576 is a 100% solids product. They can be used separately as non-stick coatings for materials in contact with foodstuffs. They can also be used in these applications in the form of a two-layer system which boosts their performance. The product obtained after crosslinking only contains substances that are in conformity with a number of Food Contact legislations. Contact BS for more detailed information. Important remarks: Manufacturers of paints, varnishes or coatings must naturally make sure that the other constituents in their formulas (solvents, pigments, additives, etc.) also comply with the regulations. They must also check that the coating obtained have been correctly applied, in particular to avoid any risk of migration of constituents. 收起 | |
| SILBIONE DISPERSION CAF 71528 | Elkem Silicones | SILBIONE DISPERSION CAF 71528 is a one component silicone rubber crosslinking at room temperature by reacting with the moisture in the air. These SILBIONE products contain reactive polydimethylsiloxane oils and inert fillers. The SILBIONE DISPERSIONS CAF ...展开 SILBIONE DISPERSION CAF 71528 is a one component silicone rubber crosslinking at room temperature by reacting with the moisture in the air. These SILBIONE products contain reactive polydimethylsiloxane oils and inert fillers. The SILBIONE DISPERSIONS CAF 71550 and 71528 are supplied as cyclohexane dispersions (70% solids). The SILBIONE DISPERSION CAF 71500G is supplied as cyclohexane dispersions (50% solids). The SILBIONE CAF 72576 is a 100% solids product. They can be used separately as non-stick coatings for materials in contact with foodstuffs. They can also be used in these applications in the form of a two-layer system which boosts their performance. The product obtained after crosslinking only contains substances that are in conformity with a number of Food Contact legislations. Contact BS for more detailed information. Important remarks: Manufacturers of paints, varnishes or coatings must naturally make sure that the other constituents in their formulas (solvents, pigments, additives, etc.) also comply with the regulations. They must also check that the coating obtained have been correctly applied, in particular to avoid any risk of migration of constituents. 收起 | |
| SILBIONE DISPERSION CAF 71550 | Elkem Silicones | SILBIONE DISPERSION CAF 71550 is a one component silicone rubber crosslinking at room temperature by reacting with the moisture in the air. These SILBIONE products contain reactive polydimethylsiloxane oils and inert fillers. The SILBIONE DISPERSIONS CAF ...展开 SILBIONE DISPERSION CAF 71550 is a one component silicone rubber crosslinking at room temperature by reacting with the moisture in the air. These SILBIONE products contain reactive polydimethylsiloxane oils and inert fillers. The SILBIONE DISPERSIONS CAF 71550 and 71528 are supplied as cyclohexane dispersions (70% solids). The SILBIONE DISPERSION CAF 71500G is supplied as cyclohexane dispersions (50% solids). The SILBIONE CAF 72576 is a 100% solids product. They can be used separately as non-stick coatings for materials in contact with foodstuffs. They can also be used in these applications in the form of a two-layer system which boosts their performance. The product obtained after crosslinking only contains substances that are in conformity with a number of Food Contact legislations. Contact BS for more detailed information. Important remarks: Manufacturers of paints, varnishes or coatings must naturally make sure that the other constituents in their formulas (solvents, pigments, additives, etc.) also comply with the regulations. They must also check that the coating obtained have been correctly applied, in particular to avoid any risk of migration of constituents. 收起 | |
| SILBIONE RES 76405 | Elkem Silicones | SILBIONE RESINE 76405 is a polymethylphenyl-siloxane resin supplied as 50% solution in toluene. SILBIONE RESINE 76405 is used as release coating for materials that will be in contact with foodstuff. This resin can also be used as a binder in paints develo...展开 SILBIONE RESINE 76405 is a polymethylphenyl-siloxane resin supplied as 50% solution in toluene. SILBIONE RESINE 76405 is used as release coating for materials that will be in contact with foodstuff. This resin can also be used as a binder in paints developed to protect and decorate these materials. The products obtained after crosslinking of SILBIONE RESINE 76405 contain only substances permitted by the Food Contact regulations currently in force. Contact BS for more detailed information. Important remarks: Manufacturers of paints, varnishes or coatings must naturally make sure that the other constituents in their formulas (solvents, pigments, additives, etc.) also comply with the regulations. They must also check that the coatings obtained have been correctly applied, in particular to avoid any risk of migration of constituents. 收起 | |
| SILCOLAPSE 120 | Elkem Silicones | SILCOLAPSE 120 is a 100% active compound containing polydimethylsiloxane oil and silica with an excellent behaviour in a large range of pH. SILCOLAPSE 120 is mainly intended for treatment of organic and anhydrous foaming systems. It can also be used in aq...展开 SILCOLAPSE 120 is a 100% active compound containing polydimethylsiloxane oil and silica with an excellent behaviour in a large range of pH. SILCOLAPSE 120 is mainly intended for treatment of organic and anhydrous foaming systems. It can also be used in aqueous medium. SILCOLAPSE 120 is designed exclusively for industrial use. 收起 | |
| SILCOLAPSE 416 | Elkem Silicones | SILCOLAPSE 416 is a compound based on polydimethyl siloxane oil and silica. It has the characteristic of being easy to disperse in most foaming mediums. | |
| SILCOLAPSE 426R | Elkem Silicones | SILCOLAPSE 426R is a non-ionic aqueous emulsion based on polydimethylsiloxane oil. It has 30% active matter content and is recommended for the prevention, control or elimination of foam in aqueous systems. | |
| SILCOLAPSE 495 | Elkem Silicones | SILCOLAPSE 495 is a high performance silicone antifoam emulsion designed for use in a wide range of aqueous industrial applications. The product effectively controls foam at concentrations as low as 10 ppm solids, even at elevated temperatures and under ...展开 SILCOLAPSE 495 is a high performance silicone antifoam emulsion designed for use in a wide range of aqueous industrial applications. The product effectively controls foam at concentrations as low as 10 ppm solids, even at elevated temperatures and under pressure. SILCOLAPSE 495 gives good results at wide-ranging pH and is effective under highly alkaline or acidic conditions. 收起 | |
| SILCOLAPSE 496 | Elkem Silicones | SILCOLAPSE 496 is a high performance silicone antifoam emulsion designed for use in severe environmental storage conditions and a wide range of aqueous industrial applications. The product effectively controls foam at concentrations as low as 10 ppm soli...展开 SILCOLAPSE 496 is a high performance silicone antifoam emulsion designed for use in severe environmental storage conditions and a wide range of aqueous industrial applications. The product effectively controls foam at concentrations as low as 10 ppm solids, even at elevated temperatures and under pressure. SILCOLAPSE 496 gives good results at wideranging pH and is effective under highly alkaline or acidic conditions. The emulsion is freezeprotected to less than -10°C and is stable upon thawing even after repeated freeze thaw cycles below -40°C 收起 | |
| SILCOLAPSE 5020 | Elkem Silicones | SILCOLAPSE 5020 is a non-ionic aqueous emulsion containing dimethylpolysiloxane, and is highly effective for prevention, control and elimination of foam in aqueous media. SILCOLAPSE 5020 contains 20% of active ingredient and is designed for industrial use...展开 SILCOLAPSE 5020 is a non-ionic aqueous emulsion containing dimethylpolysiloxane, and is highly effective for prevention, control and elimination of foam in aqueous media. SILCOLAPSE 5020 contains 20% of active ingredient and is designed for industrial uses. Other specialized defoaming agents exist for use in food contact please consult us about them. 收起 | |
| SILCOLAPSE C525 | Elkem Silicones | SILCOLAPSE C525 is a silicone antifoam emulsion with very good water dispersibility and antifoaming efficiency in different aqueous systems. It shows very good stability with side range of pH value. | |
| SILCOLEASE 7611 | Elkem Silicones | SILCOLEASE 7611 is a kind of tri-component solventless type paper release system:Silcolease 7611 (base polymer)Silcolease crosslinker 321(crosslinker)Silcolease catalyst 91B (catalyst). | |
| SILCOLEASE ADD 107 | Elkem Silicones | SILCOLEASE ADD 107 is a silicone based additive used with a reactive solvent based silicone polymer system used for release coating of papers, films and various substrates. It has been especially designed to give excellent long term anchorage of the relea...展开 SILCOLEASE ADD 107 is a silicone based additive used with a reactive solvent based silicone polymer system used for release coating of papers, films and various substrates. It has been especially designed to give excellent long term anchorage of the release system on PET film both when laminated against adhesives and reeled as coated film. 收起 | |
| SILCOLEASE ADD 382 | Elkem Silicones | SILCOLEASE ADD 382 is a silicone based additive used with a reactive solventless silicone polymer system for POLYESTER (PET) FILM RELEASE COATING applications. | |
| SILCOLEASE ADD 702 | Elkem Silicones | SILCOLEASE ADD 702 is a white, granular powder, freely soluble in water and possessing a slight odour of ammonia. It is used with emulsion SILCOLEASE polyaddition or polycondensation release systems to improve hold-out of the silicone. | |
| SILCOLEASE CATA 11091 M | Elkem Silicones | SILCOLEASE CATALYST 11091 M is a platinum complex mainly used as a catalyst of the solventless SILCOLEASE release systems. | |
| SILCOLEASE CATA 12070 | Elkem Silicones | SILCOLEASE CATALYST 12070 is a platinum complex mainly used as a catalyst of the solventless SILCOLEASE release systems. | |
| SILCOLEASE CATA 340 | Elkem Silicones | SILCOLEASE CATA 340 is a platinum catalyst for use with polyaddition solventless release coatings. This catalyst consists of a platinum complex dispersed with a mist-reducing additive and is designed to catalyze release systems that will be coated at high...展开 SILCOLEASE CATA 340 is a platinum catalyst for use with polyaddition solventless release coatings. This catalyst consists of a platinum complex dispersed with a mist-reducing additive and is designed to catalyze release systems that will be coated at high speeds. 收起 | |
| SILCOLEASE CATA 62 A | Elkem Silicones | SILCOLEASE CATALYST 62 A is an organosilicic complex diluted in an aliphatic solvent. It is the catalyst used for the solvent based SILCOLEASE 429 system intended for RELEASE COATING of paper, films and various substrates, with the exception of food conta...展开 SILCOLEASE CATALYST 62 A is an organosilicic complex diluted in an aliphatic solvent. It is the catalyst used for the solvent based SILCOLEASE 429 system intended for RELEASE COATING of paper, films and various substrates, with the exception of food contact application. 收起 | |
| SILCOLEASE CATA 62 B | Elkem Silicones | SILCOLEASE CATALYST 62 B is an organometallic complex diluted in an aromatic solvent. It is used as catalyst for the solvent based SILCOLEASE 429 system intended for RELEASE COATING of paper, films and various substrates, except for food contact applicati...展开 SILCOLEASE CATALYST 62 B is an organometallic complex diluted in an aromatic solvent. It is used as catalyst for the solvent based SILCOLEASE 429 system intended for RELEASE COATING of paper, films and various substrates, except for food contact applications. 收起 | |
| SILCOLEASE CATA 90 B | Elkem Silicones | SILCOLEASE CATALYST 90 B is a platinum complex diluted in a solvent. It is the catalyst used for the solvent based SILCOLEASE systems, such as SILCOLEASE 7420 and 7410, intended for RELEASE COATING of paper, films and various substrates. SILCOLEASE CATALY...展开 SILCOLEASE CATALYST 90 B is a platinum complex diluted in a solvent. It is the catalyst used for the solvent based SILCOLEASE systems, such as SILCOLEASE 7420 and 7410, intended for RELEASE COATING of paper, films and various substrates. SILCOLEASE CATALYST 90 B is used solely in polyaddition reaction systems. 收起 | |
| SILCOLEASE CATA 91 B | Elkem Silicones | SILCOLEASE CATALYST 91B is a platinum complex diluted in a solvent. It is the catalyst used for the solvent based SILCOLEASE systems intended for release coating of paper, film and various substrates: SILCOLEASE 7410 SERIES. SILCOLEASE CATALYST 91B is use...展开 SILCOLEASE CATALYST 91B is a platinum complex diluted in a solvent. It is the catalyst used for the solvent based SILCOLEASE systems intended for release coating of paper, film and various substrates: SILCOLEASE 7410 SERIES. SILCOLEASE CATALYST 91B is used in polyaddition reaction only. The release properties of the coating can be modified. 收起 | |
| SILCOLEASE CATA 93 B | Elkem Silicones | SILCOLEASE CATALYST 93 B is a platinum complex diluted in a solvent. It is the catalyst used for the solvent based SILCOLEASE systems, such as SILCOLEASE 7440, intended for release coating of paper, films and various substrates. SILCOLEASE CATALYST 93 B i...展开 SILCOLEASE CATALYST 93 B is a platinum complex diluted in a solvent. It is the catalyst used for the solvent based SILCOLEASE systems, such as SILCOLEASE 7440, intended for release coating of paper, films and various substrates. SILCOLEASE CATALYST 93 B is used solely in polyaddition reaction systems. 收起 | |
| SILCOLEASE CATA 94 B | Elkem Silicones | SILCOLEASE CATALYST 94B is a platinum complex diluted in a solvent. It is the catalyst used for the solvent based SILCOLEASE systems intended for RELEASE COATING of paper, film and various substrates: SILCOLEASE 7450. SILCOLEASE CATALYST 94B is used in po...展开 SILCOLEASE CATALYST 94B is a platinum complex diluted in a solvent. It is the catalyst used for the solvent based SILCOLEASE systems intended for RELEASE COATING of paper, film and various substrates: SILCOLEASE 7450. SILCOLEASE CATALYST 94B is used in polyaddition reaction only. The release properties of the coating can be modified. 收起 | |
| SILCOLEASE EMUL RCA 954 | Elkem Silicones | SILCOLEASE EMULSION RCA 954 is a non ionic aqueous emulsion. It is used as a tight release additive in emulsion paper coating applications and serves to increase the peeling force required to separate the pressure sensitive adhesive from the siliconised r...展开 SILCOLEASE EMULSION RCA 954 is a non ionic aqueous emulsion. It is used as a tight release additive in emulsion paper coating applications and serves to increase the peeling force required to separate the pressure sensitive adhesive from the siliconised release liner. This RCA emulsion is used as a RCA in polyaddition type emulsions in the SILCOLEASE range. 收起 | |
| SILCOLEASE EMULSION 70840 | Elkem Silicones | SILCOLEASE EMULSION 70840 is a SILICONE EMULSION intended for the RELEASE COATING OF PAPERS and various other substrates, except papers used for food contact. SILCOLEASE EMULSION 70840 cures by a polycondensation reaction in the presence of an organic tin...展开 SILCOLEASE EMULSION 70840 is a SILICONE EMULSION intended for the RELEASE COATING OF PAPERS and various other substrates, except papers used for food contact. SILCOLEASE EMULSION 70840 cures by a polycondensation reaction in the presence of an organic tin compound forming an ELASTOMERIC COATING. 收起 | |
| SILCOLEASE EMULSION 902 | Elkem Silicones | SILCOLEASE EMULSION 902 is a SILICONE EMULSION intended for the RELEASE COATING OF PAPERS and various other substrates. SILCOLEASE EMULSION 902 cures by a polyaddition reaction in the presence of an organometallic compound forming an ELASTOMERIC COATING. ...展开 SILCOLEASE EMULSION 902 is a SILICONE EMULSION intended for the RELEASE COATING OF PAPERS and various other substrates. SILCOLEASE EMULSION 902 cures by a polyaddition reaction in the presence of an organometallic compound forming an ELASTOMERIC COATING. The release properties of the coatings can be modified as required. 收起 | |
| SILCOLEASE EMULSION 907 | Elkem Silicones | SILCOLEASE EMULSION 907 is a SILICONE EMULSION and is used as the base polymer in a three part formulation intended for the RELEASE COATING OF PAPERS, and various other substrates. SILCOLEASE EMULSION 907 cures by a polyaddition reaction in the presence o...展开 SILCOLEASE EMULSION 907 is a SILICONE EMULSION and is used as the base polymer in a three part formulation intended for the RELEASE COATING OF PAPERS, and various other substrates. SILCOLEASE EMULSION 907 cures by a polyaddition reaction in the presence of suitable emulsions of crosslinker and an organometallic catalyst, for example (e.g. SILCOLEASE EMULSION XL 969 and SILCOLEASE EMULSION CATA 903) to give an ELASTOMERIC type coating. It may be used to coat substrates that meet “food contact application” requirements. 收起 | |
| SILCOLEASE EMULSION 908 | Elkem Silicones | SILCOLEASE EMULSION 908 is a SILICONE EMULSION intended for the RELEASE COATING OF PAPERS and various other substrates. SILCOLEASE EMULSION 908 cures by a polyaddition reaction in the presence of an organometallic catalyst, for example SILCOLEASE EMULSION...展开 SILCOLEASE EMULSION 908 is a SILICONE EMULSION intended for the RELEASE COATING OF PAPERS and various other substrates. SILCOLEASE EMULSION 908 cures by a polyaddition reaction in the presence of an organometallic catalyst, for example SILCOLEASE EMULSION CATALYST 903, producing an ELASTOMERIC COATING. The release properties of the coatings can be modified as required. 收起 | |
| SILCOLEASE EMULSION 912 | Elkem Silicones | SILCOLEASE EMULSION 912 is a silicone emulsion intended for the release coating of papers and various other substrates. SILCOLEASE EMULSION 912 cures by a polyaddition reaction in the presence of an organometallic catalyst, for example SILCOLEASE EMULSION...展开 SILCOLEASE EMULSION 912 is a silicone emulsion intended for the release coating of papers and various other substrates. SILCOLEASE EMULSION 912 cures by a polyaddition reaction in the presence of an organometallic catalyst, for example SILCOLEASE EMULSION CATALYST 913 producing an elastomeric coating. The release properties of the coatings can be modified as required. 收起 | |
| SILCOLEASE EMULSION 915 | Elkem Silicones | SILCOLEASE EMULSION 915 is a silicone emulsion intended for the release coating of papers and various other substrates. SILCOLEASE EMULSION 915 cures by a polyaddition reaction in the presence of an organometallic compound forming an elastomeric coating. ...展开 SILCOLEASE EMULSION 915 is a silicone emulsion intended for the release coating of papers and various other substrates. SILCOLEASE EMULSION 915 cures by a polyaddition reaction in the presence of an organometallic compound forming an elastomeric coating. The release properties of the coatings can be modified as required. 收起 | |
| SILCOLEASE EMULSION 925 | Elkem Silicones | SILCOLEASE EMUL 925 is a silicone emulsion intended for the release coating of papers and various other substrates. SILCOLEASE EMUL 925 cures by a polyaddition reaction in the presence of an organometallic catalyst, for example SILCOLEASE EMULSION CATALYS...展开 SILCOLEASE EMUL 925 is a silicone emulsion intended for the release coating of papers and various other substrates. SILCOLEASE EMUL 925 cures by a polyaddition reaction in the presence of an organometallic catalyst, for example SILCOLEASE EMULSION CATALYST 903, producing an elastomeric coating. The release properties of the coatings can be modified as required. 收起 | |
| SILCOLEASE EMULSION CATA 70827 A | Elkem Silicones | SILCOLEASE EMULSION CATALYST 70827 A is an organic tin compound emulsion. It is the EMULSION CATALYST of silicone emulsions intended for the RELEASE COATING OF PAPERS and various other substrates, - except for substrates used for food contact -e.g. SILCOL...展开 SILCOLEASE EMULSION CATALYST 70827 A is an organic tin compound emulsion. It is the EMULSION CATALYST of silicone emulsions intended for the RELEASE COATING OF PAPERS and various other substrates, - except for substrates used for food contact -e.g. SILCOLEASE EMULSION 70840. It only catalyses polycondensation type reactions. 收起 | |
| SILCOLEASE EMULSION CATA 903 | Elkem Silicones | SILCOLEASE EMULSION CATALYST 903 is an emulsion of reactive silicone polymers combined with an organometallic catalyst. It is an EMULSION CATALYST to be used in conjunction with a silicone emulsion intended for RELEASE COATING OF PAPERS and various substr...展开 SILCOLEASE EMULSION CATALYST 903 is an emulsion of reactive silicone polymers combined with an organometallic catalyst. It is an EMULSION CATALYST to be used in conjunction with a silicone emulsion intended for RELEASE COATING OF PAPERS and various substrates, for example SILCOLEASE EMULSION 908. It is recommended uniquely for the catalysis of polyaddition type reactions. 收起 | |
| SILCOLEASE EMULSION CATA 909 | Elkem Silicones | SILCOLEASE EMULSION CATA 909 a non-ionic aqueous emulsion of polymethylsiloxane grafted with reactive chemicals with the addition of a Platinum salt. It is used as an emulsion catalyst for the range of SILCOLEASE EMULSIONS to obtain a non-migratory releas...展开 SILCOLEASE EMULSION CATA 909 a non-ionic aqueous emulsion of polymethylsiloxane grafted with reactive chemicals with the addition of a Platinum salt. It is used as an emulsion catalyst for the range of SILCOLEASE EMULSIONS to obtain a non-migratory release coating for flexible substrates such as papers and films. 收起 | |
| SILCOLEASE EMULSION CATA 911 | Elkem Silicones | SILCOLEASE EMULSION CATA 911 is an emulsion of reactive silicone polymers combined with an organometallic catalyst. It is an emulsion catalyst to be used in conjunction with a silicone emulsion intended for release coating of papers and various substrates...展开 SILCOLEASE EMULSION CATA 911 is an emulsion of reactive silicone polymers combined with an organometallic catalyst. It is an emulsion catalyst to be used in conjunction with a silicone emulsion intended for release coating of papers and various substrates, for example SILCOLEASE EMULSION 915. It only catalyses polyaddition type reactions. 收起 | |
| SILCOLEASE EMULSION XL 966 | Elkem Silicones | SILCOLEASE EMULSION CROSSLINKER 966 is a silicone emulsion that can be used as a CROSSLINKER for polyaddition and polycondensation emulsions in the SILCOLEASE range. | |
| SILCOLEASE EMULSION XL 968 | Elkem Silicones | SILCOLEASE EMULSION XL 968 is a silicone emulsion that can be used as a CROSSLINKER for polyaddition and polycondensation emulsions in the SILCOLEASE range. | |
| SILCOLEASE EMULSION XL 969 | Elkem Silicones | SILCOLEASE EMULSION XL 969 is a silicone emulsion that can be used as a CROSSLINKER for polyaddition and polycondensation emulsions in the SILCOLEASE range. | |
| SILCOLEASE HA 1 | Elkem Silicones | SILCOLEASE HA-1 is a water-based additive. It is used with emulsion. SILCOLEASE polyaddition or polycondensation release systems to improve hold-out of the silicone. | |
| SILCOLEASE MRA 385 | Elkem Silicones | SILCOLEASE MRA 385 is a 2nd generation mist reducing additive used with solventless SILCOLEASE polyaddition release systems processed at high running speeds. Based on branched silicone polymer technology, SILCOLEASE MRA 385 is effective at much lower do...展开 SILCOLEASE MRA 385 is a 2nd generation mist reducing additive used with solventless SILCOLEASE polyaddition release systems processed at high running speeds. Based on branched silicone polymer technology, SILCOLEASE MRA 385 is effective at much lower doses than 1st generation mist reducing products at line speeds up to 1600 m/min. Typical addition levels from 2% to 6% are sufficient for most applications up to about 1000 m/min. 收起 | |
| SILCOLEASE PC-105NXL | Elkem Silicones | SILCOLEASE PC-105NXL is a thermally curable silicone emulsion which provides an easy release surface for adhesives and other tacky materials such as pressure sensitive tapes, labels, asphalt shingle wrap, and food packaging. SILCOLEASE PC-105NXL is an e...展开 SILCOLEASE PC-105NXL is a thermally curable silicone emulsion which provides an easy release surface for adhesives and other tacky materials such as pressure sensitive tapes, labels, asphalt shingle wrap, and food packaging. SILCOLEASE PC-105NXL is an emulsion of a low vinyl content silicone fluid but without the methyl hydrogen siloxane crosslinker pre-added. As such, SILCOLEASE PC-105NXL offers the flexibility to the formulator of being able to modify the type or the amount of crosslinker to achieve special performance characteristics. A platinum catalyst emulsion is also required. Release modifier emulsions are available which, when blended with SILCOLEASE PC-105NXL in incrementally higher levels, will give correspondingly tighter release force performance. A platinum catalyst emulsion is also required. 收起 | |
| SILCOLEASE PC-107 | Elkem Silicones | SILCOLEASE PC-107 is a thermally curable silicone emulsion which provides a premium release surface for adhesive and other tacky materials such as pressure sensitive tapes, labels, asphalt shingle wrap, and food packaging. Release modifier emulsions are a...展开 SILCOLEASE PC-107 is a thermally curable silicone emulsion which provides a premium release surface for adhesive and other tacky materials such as pressure sensitive tapes, labels, asphalt shingle wrap, and food packaging. Release modifier emulsions are available which, when blended with SILCOLEASEPC-107 in incrementally higher levels, will give correspondingly tighter release force performance. SILCOLEASE PC-107 NXL is identical in composition to SILCOLEASEPC-107 but without methyl hydrogen crosslinker. As such, SILCOLEASEPC-107 NXL offers the flexibility to the formulator to modify the type and / or the amount of crosslinker to achieve specific performance characteristics. A platinum catalyst emulsion is required for each. 收起 | |
| SILCOLEASE PC-107 NXL | Elkem Silicones | SILCOLEASE PC-107 is a thermally curable silicone emulsion which provides a premium release surface for adhesive and other tacky materials such as pressure sensitive tapes, labels, asphalt shingle wrap, and food packaging. Release modifier emulsions are a...展开 SILCOLEASE PC-107 is a thermally curable silicone emulsion which provides a premium release surface for adhesive and other tacky materials such as pressure sensitive tapes, labels, asphalt shingle wrap, and food packaging. Release modifier emulsions are available which, when blended with SILCOLEASEPC-107 in incrementally higher levels, will give correspondingly tighter release force performance. SILCOLEASE PC-107 NXL is identical in composition to SILCOLEASEPC-107 but without methyl hydrogen crosslinker. As such, SILCOLEASEPC-107 NXL offers the flexibility to the formulator to modify the type and / or the amount of crosslinker to achieve specific performance characteristics. A platinum catalyst emulsion is required for each. 收起 | |
| SILCOLEASE PC-168 | Elkem Silicones | SILCOLEASE PC-168 is a thermally curable silicone emulsion of silanol functional polysiloxane polymers which provide an easy release surface for adhesives or otherwise tacky materials. SILCOLEASE PC-94 tin catalyst is required to make a fully crosslinkabl...展开 SILCOLEASE PC-168 is a thermally curable silicone emulsion of silanol functional polysiloxane polymers which provide an easy release surface for adhesives or otherwise tacky materials. SILCOLEASE PC-94 tin catalyst is required to make a fully crosslinkable coating. Post cure is recommended with tin catalyzed emulsions. 收起 | |
| SILCOLEASE PC-188 | Elkem Silicones | SILCOLEASE PC-188 is a thermally curable silicone emulsion which provides a premium release surface for adhesive and other tacky materials such as pressure sensitive tapes, labels, asphalt shingle wrap, and food packaging. Release modifier emulsions are a...展开 SILCOLEASE PC-188 is a thermally curable silicone emulsion which provides a premium release surface for adhesive and other tacky materials such as pressure sensitive tapes, labels, asphalt shingle wrap, and food packaging. Release modifier emulsions are available which, when blended with Silcolease ® PC-188 in incrementally higher levels, will give correspondingly tighter release force performance. Silcolease ® PC-188NXL is identical in composition to Silcolease ® PC-188 but without methyl hydrogen crosslinker. As such, Silcolease ® PC-188NXL offers the flexibility to the formulator to modify the type and / or the amount of crosslinker to achieve specific performance characteristics. A platinum catalyst emulsion is required for each. 收起 | |
| SILCOLEASE PC-188NXL | Elkem Silicones | SILCOLEASE PC-188 is a thermally curable silicone emulsion which provides a premium release surface for adhesive and other tacky materials such as pressure sensitive tapes, labels, asphalt shingle wrap, and food packaging. Release modifier emulsions are a...展开 SILCOLEASE PC-188 is a thermally curable silicone emulsion which provides a premium release surface for adhesive and other tacky materials such as pressure sensitive tapes, labels, asphalt shingle wrap, and food packaging. Release modifier emulsions are available which, when blended with Silcolease ®PC-188 in incrementally higher levels, will give correspondingly tighter release force performance. Silcolease ® PC-188NXL is identical in composition to Silcolease ®PC-188 but without methyl hydrogen crosslinker. As such, Silcolease ®PC-188NXL offers the flexibility to the formulator to modify the type and / or the amount of crosslinker to achieve specific performance characteristics. A platinum catalyst emulsion is required for each. 收起 | |
| SILCOLEASE PC-191 | Elkem Silicones | SILCOLEASE PC-191 is a release modifier designed to give incrementally higher levels of release when added to the easy release formulations. SILCOLEASE PC- 191 may be used at 0% through 100% of the polymer component with release values increasing proporti...展开 SILCOLEASE PC-191 is a release modifier designed to give incrementally higher levels of release when added to the easy release formulations. SILCOLEASE PC- 191 may be used at 0% through 100% of the polymer component with release values increasing proportionally as the level of SILCOLEASE PC-191 is increased in the formulation. Unlike traditional tight release additives which are based on vinyl functional siloxane resins, SILCOLEASE PC-191 is based on hydride functionality. As a result, SILCOLEASE PC-191 may offer greater efficiency in affecting release response than the vinyl functional counterparts. 收起 | |
| SILCOLEASE PC-195NXL | Elkem Silicones | SILCOLEASE PC-195NXL is a polyaddition release modifier designed to give incrementally higher levels of release when added to easy release formulations. SILCOLEASE PC-195NXL may be used at 0% through 100% of the emulsion component with release values incr...展开 SILCOLEASE PC-195NXL is a polyaddition release modifier designed to give incrementally higher levels of release when added to easy release formulations. SILCOLEASE PC-195NXL may be used at 0% through 100% of the emulsion component with release values increasing proportionally as the level of SILCOLEASE PC-195NXL is increased. Additionally, when SILCOLEASE PC-195NXL is used at or near 100% of the polymer blend, very high release levels are achievable with both rubber based and acrylic adhesives. 收起 | |
| SILCOLEASE PC-197 | Elkem Silicones | SILCOLEASE PC-197 is a release modifier designed to provide incrementally higher levels of release when added to easy release emulsion formulations. SILCOLEASEPC-197 may be used at 0% through 100% of the polymer component with release values increasing ...展开 SILCOLEASE PC-197 is a release modifier designed to provide incrementally higher levels of release when added to easy release emulsion formulations. SILCOLEASEPC-197 may be used at 0% through 100% of the polymer component with release values increasing proportionally as the amount of SILCOLEASEPC-197 is increased in the formulation. SILCOLEASE PC-197 is based on a vinyl functional siloxane resin. 收起 | |
| SILCOLEASE PC-31 | Elkem Silicones | SILCOLEASE PC-31 is an emulsion of methyl hydrogen polysiloxane crosslinker for use with both platinum catalyzed addition cure and tin catalyzed condensation cure emulsion release coatings. The methyl hydrogen polysiloxane in SILCOLEASE PC-31 is a copolym...展开 SILCOLEASE PC-31 is an emulsion of methyl hydrogen polysiloxane crosslinker for use with both platinum catalyzed addition cure and tin catalyzed condensation cure emulsion release coatings. The methyl hydrogen polysiloxane in SILCOLEASE PC-31 is a copolymer, while SILCOLEASE PC-868 is based on a methyl hydrogen polysiloxane homopolymer. SILCOLEASE PC-50 is a proprietary blend of two methyl hydrogen crosslinkers and is especially suited to work with troublesome substrates to provide superb anchorage of the cured silicone coating. The homopolymer and copolymer crosslinkers provide the flexibility of creating a range of crosslink matrices from a dense, tightly knit matrix to one that is comparatively open. With troublesome adhesives or substrates, release and anchorage improvements may be realized by an interchange of crosslinkers. 收起 | |
| SILCOLEASE PC-370 | Elkem Silicones | SILCOLEASE PC-370 is a platinum catalyst compound for use with polyaddition solventless release coatings. The catalyst complex is dispersed in a vinyl terminated siloxane fluid for ease of addition. | |
| SILCOLEASE PC-675 | Elkem Silicones | SILCOLEASE PC-675 UV/EB silicone low friction release modifier is a 100% reactive release coating component based on epoxy-silicone copolymer technology. This release modifier has been very specifically designed for optimum surface activity and exhibits ...展开 SILCOLEASE PC-675 UV/EB silicone low friction release modifier is a 100% reactive release coating component based on epoxy-silicone copolymer technology. This release modifier has been very specifically designed for optimum surface activity and exhibits very low polarity and surface tension more akin to high molecular weight di-methyl silicones. When blended at levels of 1-6% into the SILCOLEASE UV POLY 200 UV/EB silicone polymer release coating system, it effectively acts as a low releaseControlledReleaseAdditive (CRA-minus). It also cuts both dynamic (Kd) and static (Ks) coefficients of friction, up to 50% compared with standard UV Premium Release formulations. SILCOLEASE PC-675 modified silicone release chemistries result in smoother coatings with often dramatically reduced release zippiness against very aggressive adhesives. Rapid and stable cure with excellent anchorage to paper and film is achieved by simply passing the coating under high-intensity ultraviolet light (medium pressure mercury vapor bulbs) or electron beam irradiation. 收起 | |
| SILCOLEASE PC-850 | Elkem Silicones | SILCOLEASE PC-850 is an adhesion-promoting additive for use with SILCOLEASE polyaddition cured solventless and cationic UV/EB cured release coatings. SILCOLEASE PC-850 is designed to significantly improve the anchorage of these release coatings to polye...展开 SILCOLEASE PC-850 is an adhesion-promoting additive for use with SILCOLEASE polyaddition cured solventless and cationic UV/EB cured release coatings. SILCOLEASE PC-850 is designed to significantly improve the anchorage of these release coatings to polyester film. A 1% addition to the formulated bath will produce excellent anchorage even under high humidity conditions. SILCOLEASE PC-850 does not require excessive surface treatment of PET thus providing energy savings nor does SILCOLEASE PC-850 slow cure response as compared to other adhesion promoters. For best results, this adhesion promoter ought to be added to the catalyzed silicone release coating as soon as possible before initiating the coating operation. 收起 |
