| Dynasylan® 1124 | Evonik Operations GmbH, BL Silanes | Dynasylan® 1124 is a secondary aminofunctional methoxy-silane. The product acts as an adhesion promoter between inorganic materials (for example glass, metals and fillers) and organic polymers (thermosets, thermoplastics and elastomers). It can also be us...展开 Dynasylan® 1124 is a secondary aminofunctional methoxy-silane. The product acts as an adhesion promoter between inorganic materials (for example glass, metals and fillers) and organic polymers (thermosets, thermoplastics and elastomers). It can also be used for the chemical modification of polymers and isocyanates. 收起 | |
| Dynasylan® 4148 | Evonik Operations GmbH, BL Silanes | Dynasylan® 4148 is a ready-to-use silane, soluble in water and most organic solvents. Dynasylan® 4148 is a rheological additive which reduces the viscosity of highly-filled polymer systems, like aluminum trihydroxide-filled polyesters or SMC-pastes. Contr...展开 Dynasylan® 4148 is a ready-to-use silane, soluble in water and most organic solvents. Dynasylan® 4148 is a rheological additive which reduces the viscosity of highly-filled polymer systems, like aluminum trihydroxide-filled polyesters or SMC-pastes. Contrary to most other organofunctional silanes, Dynasylan® 4148 features chemical polarity but has a non-reactive polar group. Furthermore, Dynasylan® 4148 can be used as anti-settling agent for fillers and pigments in paints as well as corrosion inhibitors in glycol based cooling agents. 收起 | |
| Dynasylan® 9896 | Evonik Operations GmbH, BL Silanes | Dynasylan® 9896 is an oligomeric short-chain alkylfunctional silane. It is soluble in common organic solvents. | |
| Dynasylan® AR | Evonik Operations GmbH, BL Silanes | Dynasylan® AR is a pre-hydrolyzed, ready-for-use silicic acid ester – hybrid binder with additional colloidal SiO2 particles. Dynasylan® AR contains ethanol as solvent and sulfuric acid as catalyst. Dynasylan® AR is especially suited for use in ceramic ca...展开 Dynasylan® AR is a pre-hydrolyzed, ready-for-use silicic acid ester – hybrid binder with additional colloidal SiO2 particles. Dynasylan® AR contains ethanol as solvent and sulfuric acid as catalyst. Dynasylan® AR is especially suited for use in ceramic casting molds and as a binder for 2-pack zinc dust anti-corrosion paints (e.g. shop-primers). In zinc rich paints with a zinc content above 95% Dynasylan® AR binds the zinc and allows the formation of hard coatings with an effective galvanic protection. 收起 | |
| Dynasylan® F 8263 | Evonik Operations GmbH, BL Silanes | Dynasylan® F 8263 acts as an oleophobic agent to modify carboxy- and hydroxyfunctional substrates (e.g. glass, ceramic). | |
| Dynasylan® HMDS | Evonik Operations GmbH, BL Silanes | Dynasylan® HMDS is a hydrophobizing agent for surface modification. It can also be used to modify polymers. | |
| Dynasylan® HYDROSIL 1153 | Evonik Operations GmbH, BL Silanes | Dynasylan® HYDROSIL 1153 is a water-borne amino-functional silane concentrate which acts as an adhesion promoter between inorganic materials (for example glass, metals and fillers) and organic polymers (thermosets, thermoplastics and elastomers). Dynasyla...展开 Dynasylan® HYDROSIL 1153 is a water-borne amino-functional silane concentrate which acts as an adhesion promoter between inorganic materials (for example glass, metals and fillers) and organic polymers (thermosets, thermoplastics and elastomers). Dynasylan® HYDROSIL 1153 contains about 85% active silane content in water. 收起 | |
| Dynasylan® HYDROSIL 2775 | Evonik Operations GmbH, BL Silanes | Dynasylan® HYDROSIL 2775 is a water-borne amino-functional silane. It is comonly used as an adhesion promotor between inorganic substrates and organic polymers. | |
| Dynasylan® HYDROSIL 2909 | Evonik Operations GmbH, BL Silanes | Dynasylan® HYDROSIL 2909 is a water-borne amino-functional silane and alkyl-functional silane. It is comonly used as a wash primer to treat metals before coatings with another coating system. Corrosion protection can often be achieved. | |
| Dynasylan® MEMO | Evonik Operations GmbH, BL Silanes | 一种甲基丙酸烯官能硅烷，可用作粘胶促进剂、表面改性剂、高分子合成共聚单体，并可作为交联剂。 | |
| Dynasylan® MKS | Evonik Operations GmbH, BL Silanes | Dynasylan® MKS is a silicic acid ester based binder, excellent for the formulation of one-pack zinc silicate coating systems used for heavy duty corrosion protection. Zinc dust paints formulated in this manner have an excellent shelf life in the absence o...展开 Dynasylan® MKS is a silicic acid ester based binder, excellent for the formulation of one-pack zinc silicate coating systems used for heavy duty corrosion protection. Zinc dust paints formulated in this manner have an excellent shelf life in the absence of moisture. Dynasylan® MKS is a binder with superior anti-settling properties. Paints formulated with Dynasylan® MKS can easily be stirred-up even after longer storage times. After processing, the coating will cure in the presence of atmospheric moisture. Overcoating with conventional topcoat systems is facile. Zinc dust paints based on Dynasylan® MKS provide effective protection of steel against corrosion in aggressive industrial and coastal environments at elevated temperatures (up to 420 °C) in the presence of chemicals. 收起 | |
| Dynasylan® OCTMO | Evonik Operations GmbH, BL Silanes | Dynasylan® OCTMO is commonly used as a hydrophobic surface modifier for fillers and pigments. | |
| Dynasylan® SILBOND® 40 | Evonik Operations GmbH, BL Silanes | Dynasylan® Silbond® 40 is a polyethylsilicate with 40 % SiO2 content. Its most important industrial use is as a binder for zinc silicate paints for heavy duty corrosion protection. Furthermore it is used as an inorganic reactive solvent for high temperatu...展开 Dynasylan® Silbond® 40 is a polyethylsilicate with 40 % SiO2 content. Its most important industrial use is as a binder for zinc silicate paints for heavy duty corrosion protection. Furthermore it is used as an inorganic reactive solvent for high temperature applications. 收起 | |
| Dynasylan® SILBOND® 40-HF | Evonik Operations GmbH, BL Silanes | Dynasylan® Silbond® 40-HF, is a polyethylsilicate with 40 % SiO2 content. Its most important industrial use is as a binder for zinc silicate paints for heavy duty corrosion protection. Furthermore it is used as an inorganic reactive solvent for high tempe...展开 Dynasylan® Silbond® 40-HF, is a polyethylsilicate with 40 % SiO2 content. Its most important industrial use is as a binder for zinc silicate paints for heavy duty corrosion protection. Furthermore it is used as an inorganic reactive solvent for high temperature applications. 收起 | |
| Dynasylan® SILBOND® 50 | Evonik Operations GmbH, BL Silanes | Dynasylan® Silbond® 50, is a polyethylsilicate with > 45 % SiO2 content. Its most important industrial use is as a binder for zinc silicate paints for heavy duty corrosion protection. Furthermore it is used as an inorganic reactive solvent for high temper...展开 Dynasylan® Silbond® 50, is a polyethylsilicate with > 45 % SiO2 content. Its most important industrial use is as a binder for zinc silicate paints for heavy duty corrosion protection. Furthermore it is used as an inorganic reactive solvent for high temperature applications. 收起 | |
| Dynasylan® SILBOND® Condensed | Evonik Operations GmbH, BL Silanes | Dynasylan® Silbond® Condensed, the ethyl ester of orthosilicic acid, is frequently also referred to under the name of TEOS (tetraethoxysilane). The product is a colourless, low viscosity liquid with SiO2 content of 28.5%. It is comonly used as a binder fo...展开 Dynasylan® Silbond® Condensed, the ethyl ester of orthosilicic acid, is frequently also referred to under the name of TEOS (tetraethoxysilane). The product is a colourless, low viscosity liquid with SiO2 content of 28.5%. It is comonly used as a binder for sol-gel systems or as a reactive inorganic solvent in high temperature coatings. 收起 | |
| Dynasylan® SILBOND® H-6c | Evonik Operations GmbH, BL Silanes | Dynasylan® SILBOND® H-6C is a clear, low-viscosity pre-hydrolyzed ethyl polysilicate binder that has been designed for use in two part zinc-rich primers for corrosion protection. The silica content ranges from 17.5% to 19.0% (as SiO2). It can also be use...展开 Dynasylan® SILBOND® H-6C is a clear, low-viscosity pre-hydrolyzed ethyl polysilicate binder that has been designed for use in two part zinc-rich primers for corrosion protection. The silica content ranges from 17.5% to 19.0% (as SiO2). It can also be used for investment casting applications. 收起 | |
| Dynasylan® SILBOND® HT-28A | Evonik Operations GmbH, BL Silanes | Dynasylan® SILBOND® HT-28A is a milky-white, low-viscosity pre-hydrolyzed ethyl polysilicate hybrid binder with content ranging from 32.5 to 33.5% silica (as SiO2). The silica content is resultant of a mixture of silica derived from TEOS and other compone...展开 Dynasylan® SILBOND® HT-28A is a milky-white, low-viscosity pre-hydrolyzed ethyl polysilicate hybrid binder with content ranging from 32.5 to 33.5% silica (as SiO2). The silica content is resultant of a mixture of silica derived from TEOS and other components. This material is formulated for use in two component inorganic zinc-rich primers for corrosion protection. Advantages include improved toughness and excellent performance in high-temperature applications. The improved toughness is a direct result of the higher silica content as compared to a ethyl polysilicate binder. 收起 | |
| Dynasylan® SILBOND® HT-33 | Evonik Operations GmbH, BL Silanes | Dynasylan® SILBOND® HT-33 is a milky-white, low-viscosity pre-hydrolyzed ethyl polysilicate hybrid binder that contains a mixture of silica derived from TEOS and other components. The silica content ranges from 32.7% to 34.0% (as SiO2). This material is f...展开 Dynasylan® SILBOND® HT-33 is a milky-white, low-viscosity pre-hydrolyzed ethyl polysilicate hybrid binder that contains a mixture of silica derived from TEOS and other components. The silica content ranges from 32.7% to 34.0% (as SiO2). This material is formulated for use in two component inorganic zinc-rich primers for corrosion protection. Advantages include improved toughness and excellent performance in high-temperature applications. The improved toughness is a direct result of the higher SiO2 content. 收起 | |
| Dynasylan® SILBOND® PURE | Evonik Operations GmbH, BL Silanes | Dynasylan® Silbond® Pure, the ethyl ester of orthosilicic acid, is frequently also referred to under the name of TEOS (tetraethoxysilane). The product is a colourless, low viscosity liquid with SiO2 content of 28.5%. It is comonly used as a binder for sol...展开 Dynasylan® Silbond® Pure, the ethyl ester of orthosilicic acid, is frequently also referred to under the name of TEOS (tetraethoxysilane). The product is a colourless, low viscosity liquid with SiO2 content of 28.5%. It is comonly used as a binder for sol-gel systems or as a reactive inorganic solvent in high temperature coatings. 收起 | |
| Dynasylan® SIVO 110 | Evonik Operations GmbH, BL Silanes | Dynasylan® SIVO 110 is a multifunctional, basically VOC-free, water-borne sol-gel hybrid binder cured at elevated temperatures. It is composed of organofunctional silanes and functionalized SiO2 particles. | |
| Dynasylan® SIVO 121 | Evonik Operations GmbH, BL Silanes | Dynasylan® SIVO 121 is a multifunctional, nearly VOC-free, water-borne silane system. It can act most prominently as a hydrophobizing or olephobizing agent for plain wood surfaces or weathered, originally painted treated wood surfaces. | |
| Dynasylan® SIVO 140 | Evonik Operations GmbH, BL Silanes | Dynasylan® SIVO 140 is an acidic silane based, fully hydrolysed and almost VOC-free hybrid inorganic binder. Comonly Dynasylan® SIVO 140 is used as a binder for water-borne zinc silicate systems for heavy duty corrosion protection paints. Formulations bas...展开 Dynasylan® SIVO 140 is an acidic silane based, fully hydrolysed and almost VOC-free hybrid inorganic binder. Comonly Dynasylan® SIVO 140 is used as a binder for water-borne zinc silicate systems for heavy duty corrosion protection paints. Formulations based on Dynasylan® SIVO 140 cure at room temperature. 收起 | |
| Dynasylan® SIVO 160 | Evonik Operations GmbH, BL Silanes | Dynasylan® SIVO 160 is a water-borne storage stable silane based sol-gel system for the formulation of inorganic surface treatment primers and wash-primers. formulations based on this product cure at a temperature of 20 to 80 °C which represents a major b...展开 Dynasylan® SIVO 160 is a water-borne storage stable silane based sol-gel system for the formulation of inorganic surface treatment primers and wash-primers. formulations based on this product cure at a temperature of 20 to 80 °C which represents a major breakthrough for water-borne sol-gel systems. 收起 | |
| Dynasylan® SIVO 214 | Evonik Operations GmbH, BL Silanes | Dynasylan® SIVO 214 is an aminofunctional silane composition which acts as an adhesion promoter between inorganic materials (for example glass, metals and fillers) and organic polymers (thermosets, thermoplastics and elastomers). | |
| Dynasylan® VTEO | Evonik Operations GmbH, BL Silanes | 双功能有机硅烷，即可以和无机材料，也可以和有机聚合物结合，用作交联剂、增粘剂和/或表面改性剂。 | |
| Dynasylan® VTMO | Evonik Operations GmbH, BL Silanes | 双功能有机硅烷，即可以和无机材料，也可以和有机聚合物结合，用作交联剂, 增粘剂和/或表面改性剂。 | |
| EMULTEX™ FR 728 | Synthomer | EMULTEX™ FR 728 is a specially colloid stabilised vinyl acetate - vinyl versatate copolymer dispersion developed for formulation of water-borne intumescent coatings. EMULTEX™ FR 728 provides a quick char formation with high expansion factor. EMULTEX™ FR 7...展开 EMULTEX™ FR 728 is a specially colloid stabilised vinyl acetate - vinyl versatate copolymer dispersion developed for formulation of water-borne intumescent coatings. EMULTEX™ FR 728 provides a quick char formation with high expansion factor. EMULTEX™ FR 728 is designed for intumescent coatings for fire protection up to R60. 收起 | |
| EMULTEX™ FR 797 | Synthomer | EMULTEX™ FR 797 is a specially colloid stabilised and vinyl acetate - vinyl versatate copolymer dispersion developed for formulation of waterborne intumescent coatings. EMULTEX™ FR 797 provides a slow char formation with medium expansion factor. EMULTEX™ ...展开 EMULTEX™ FR 797 is a specially colloid stabilised and vinyl acetate - vinyl versatate copolymer dispersion developed for formulation of waterborne intumescent coatings. EMULTEX™ FR 797 provides a slow char formation with medium expansion factor. EMULTEX™ FR 797 is recommended for intumescent coatings with fire protection up to 120min. 收起 | |
| EMULTEX™ VV 676 | Synthomer | EMULTEX™ VV 676 is a medium particle size, colloid stabilized aqueous dispersion of a vinyl acetate - vinyl versatate - acrylate copolymer. EMULTEX™ VV 676 offers high scrub resistance, high exterior durabillity and good low temperature film forming prope...展开 EMULTEX™ VV 676 is a medium particle size, colloid stabilized aqueous dispersion of a vinyl acetate - vinyl versatate - acrylate copolymer. EMULTEX™ VV 676 offers high scrub resistance, high exterior durabillity and good low temperature film forming properties. EMULTEX™ VV 676 is recommended for a broad range of interior and exterior masonry coatings. 收起 | |
| EMULTEX™ VV 679 | Synthomer | EMULTEX™ VV 679 is a medium particle size, colloid stabilised vinyl acetate - vinyl versatate copolymer dispersion. EMULTEX™ VV 679 offers high scrub resistance and high gloss. EMULTEX™ VV 679 is recommended for matt and silk wall paints and also can be u...展开 EMULTEX™ VV 679 is a medium particle size, colloid stabilised vinyl acetate - vinyl versatate copolymer dispersion. EMULTEX™ VV 679 offers high scrub resistance and high gloss. EMULTEX™ VV 679 is recommended for matt and silk wall paints and also can be used in ready mixed fillers and ceramic tile adhesives. 收起 | |
| Epoxy Resin E-10 | Anhui Shanfu New Material Technology Co., Ltd. | Epoxy Resin E-10 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a light yellow solid granular powder that has good mechanical and anti-corrosive properties. It can be used in paints and powder coatings. | |
| Epoxy Resin E-12 | Anhui Shanfu New Material Technology Co., Ltd. | Epoxy Resin E-12 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a light yellow, solid granular powder that has good electrostatic spraying performance, chemical resistance, and anti-corrosive properties. It can be used in epoxy polye...展开 Epoxy Resin E-12 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a light yellow, solid granular powder that has good electrostatic spraying performance, chemical resistance, and anti-corrosive properties. It can be used in epoxy polyester powder coatings, or mixed with an amine curing agent for use in anti-corrosion and insulation coatings. 收起 | |
| Epoxy Resin E-14 | Anhui Shanfu New Material Technology Co., Ltd. | Epoxy Resin E-14 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a light yellow, solid granular powder that has good electrostatic spraying performance, chemical resistance, and anti-corrosive properties. It can be used in top-grade e...展开 Epoxy Resin E-14 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a light yellow, solid granular powder that has good electrostatic spraying performance, chemical resistance, and anti-corrosive properties. It can be used in top-grade epoxy polyester powder coatings, electrophoretic paints, and anti-corrosion coatings. 收起 | |
| Epoxy Resin E-20 | Anhui Shanfu New Material Technology Co., Ltd. | Epoxy Resin E-20 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a light yellow, solid granular powder that has good bending performance, chemical resistance, solvent resistance, and strong adhesion properties. It can be used in anti-...展开 Epoxy Resin E-20 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a light yellow, solid granular powder that has good bending performance, chemical resistance, solvent resistance, and strong adhesion properties. It can be used in anti-corrosion coatings, zinc powder primers, floor coatings, decorative coatings and varnishes. 收起 | |
| Epoxy Resin SF801 | Anhui Shanfu New Material Technology Co., Ltd. | Epoxy Resin SF801 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a transparent granular powder that is curable at room temperature or higher temperatures. It can be used in anti-corrosion coatings, electrophoretic paint, floor coatin...展开 Epoxy Resin SF801 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a transparent granular powder that is curable at room temperature or higher temperatures. It can be used in anti-corrosion coatings, electrophoretic paint, floor coatings, decorative coatings, and powder coatings. It has an epoxy equivalent of 450-520 g/eq and a softening point of 65-75°C. 收起 | |
| Epoxy Resin SF801A | Anhui Shanfu New Material Technology Co., Ltd. | Epoxy Resin SF801A is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a transparent granular powder that is curable at room temperature or higher temperatures. It can be used in anti-corrosion coatings, electrophoretic paint, floor coati...展开 Epoxy Resin SF801A is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a transparent granular powder that is curable at room temperature or higher temperatures. It can be used in anti-corrosion coatings, electrophoretic paint, floor coatings, decorative coatings, and powder coatings. It has an epoxy equivalent of 530-570 g/eq and a softening point of 65-75°C. 收起 | |
| Epoxy Resin SF808 | Anhui Shanfu New Material Technology Co., Ltd. | Epoxy Resin SF808 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a transparent, solid granular powder that has good electrostatic spraying performance and plate leveling capacity. It can be used in top-grade epoxy polyester powder co...展开 Epoxy Resin SF808 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a transparent, solid granular powder that has good electrostatic spraying performance and plate leveling capacity. It can be used in top-grade epoxy polyester powder coatings, electrophoretic paints, and anti-corrosion coatings. 收起 | |
| Epoxy Resin SF818 | Anhui Shanfu New Material Technology Co., Ltd. | Epoxy Resin SF818 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a transparent, solid granular powder that has good mechanical performance and electrostatic spraying performance. It can be used in electrophoretic paints, top-grade ep...展开 Epoxy Resin SF818 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a transparent, solid granular powder that has good mechanical performance and electrostatic spraying performance. It can be used in electrophoretic paints, top-grade epoxy poleyster powder coatings, and anti-corrosion coatings. 收起 | |
| Epoxy Resin SF828 | Anhui Shanfu New Material Technology Co., Ltd. | Epoxy Resin SF828 is a MMW solid Bisphenol-A type epoxy resin. This product appears as a transparent, solid granular powder that has good electrostatic spraying performance, chemical resistance, and high impact strength. It can be used in electrophoretic ...展开 Epoxy Resin SF828 is a MMW solid Bisphenol-A type epoxy resin. This product appears as a transparent, solid granular powder that has good electrostatic spraying performance, chemical resistance, and high impact strength. It can be used in electrophoretic paints, top-grade epoxy polyester powder coatings, and anti-corrosion coatings. 收起 | |
| Epoxy Resin SF838 | Anhui Shanfu New Material Technology Co., Ltd. | Epoxy Resin SF838 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a transparent, solid granular powder that has good chemical resistance, electrostatic spraying performance, and anti-corrosive properties. It can be used in electrophor...展开 Epoxy Resin SF838 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a transparent, solid granular powder that has good chemical resistance, electrostatic spraying performance, and anti-corrosive properties. It can be used in electrophoretic paints and anti-corrosion coatings. 收起 | |
| HYDRO PLIOLITE™ 050 | Synthomer | HYDRO PLIOLITE™ 050 is an acrylate copolymer based on our ABS (Amphoteric Binding System) technology, contains anionic and cationic groups. Blocks many stains, including tannin, marker, and water stains. HYDRO PLIOLITE™ 050 water-based resin was designed ...展开 HYDRO PLIOLITE™ 050 is an acrylate copolymer based on our ABS (Amphoteric Binding System) technology, contains anionic and cationic groups. Blocks many stains, including tannin, marker, and water stains. HYDRO PLIOLITE™ 050 water-based resin was designed for low VOC stain blocking primers. 收起 | |
| HYDRO PLIOLITE™ 211 | Synthomer | HYDRO PLIOLITE™ 211 is a modified styrene-acrylic copolymer dispersion developed for formulation of water-borne intumescent coatings. HYDRO PLIOLITE™ 211 has excellent water resitance that allows intumescent coatings to resist to outdoor conditions. HYDRO...展开 HYDRO PLIOLITE™ 211 is a modified styrene-acrylic copolymer dispersion developed for formulation of water-borne intumescent coatings. HYDRO PLIOLITE™ 211 has excellent water resitance that allows intumescent coatings to resist to outdoor conditions. HYDRO PLIOLITE™ 211 is designed for intumescent coatings for fire protection from R30 to R120. 收起 | |
| HYDRO PLIOLITE™ 330 | Synthomer | HYDRO PLIOLITE™ 330 is a multiphase pure acrylic copolymer dispersion designed for application on wood. HYDRO PLIOLITE™ 330 provides an excellent adhesion and enhanced film formation in adverse climatic conditions that allows formulation of weather- and s...展开 HYDRO PLIOLITE™ 330 is a multiphase pure acrylic copolymer dispersion designed for application on wood. HYDRO PLIOLITE™ 330 provides an excellent adhesion and enhanced film formation in adverse climatic conditions that allows formulation of weather- and surface-tolerant wood coatings. HYDRO PLIOLITE™ 330 is suitable for formulation of wood stains and wood trim paints. 收起 | |
| KLX 7997 | Nokxeller Quimica Ltda | KLX 7997 is a versatile polyether based aromatic isocyanate anionic dispersion for high tack formulations. It has a very soft and flexible film that can be used as a high initial and final bond strength and heat resistance. Typical applications are for mo...展开 KLX 7997 is a versatile polyether based aromatic isocyanate anionic dispersion for high tack formulations. It has a very soft and flexible film that can be used as a high initial and final bond strength and heat resistance. Typical applications are for modifying pressure sensitive textile & construction adhesives, neoprene, EVA and other plastic & leather primer applications. Once crosslinked shows outstanding water resistance. 收起 | |
| LIPATON™ SB 5521 | Synthomer | LIPATON™ SB 5521 is a finely dispersed aqueous dispersion of a carboxylated styrene-butadiene copolymer. The dispersion contains an anionic emulsifier system and is free from film forming aids, APEO, solvents and plasticizers. LIPATON™ SB 5521 is a hydrop...展开 LIPATON™ SB 5521 is a finely dispersed aqueous dispersion of a carboxylated styrene-butadiene copolymer. The dispersion contains an anionic emulsifier system and is free from film forming aids, APEO, solvents and plasticizers. LIPATON™ SB 5521 is a hydrophobic and elastic polymer. It is highly recommended for anti-corrosive primers and underbody coatings. 收起 | |
| LYTRON™ 180 AV | Synthomer | LYTRON™ 180 AV is an acidic un-neutralized opacifier for home and personal care products with no added preservatives. LYTRON™ 180 AV styrene acrylic copolymer opacifier for bath and shower products, including liquid hand wash and soaps, laundry detergents...展开 LYTRON™ 180 AV is an acidic un-neutralized opacifier for home and personal care products with no added preservatives. LYTRON™ 180 AV styrene acrylic copolymer opacifier for bath and shower products, including liquid hand wash and soaps, laundry detergents, and cleaners. 收起 | |
| MOR-GLO™ 10 | Synthomer | MOR-GLO™ 10 is a floor finish, water-based styrene acrylic, polymer emulsion for ultra-high speed (UHS) maintenance program. MOR-GLO™ 10 provides a very repairable surface that has a high distinctness of image without compromising the abrasion, soil and s...展开 MOR-GLO™ 10 is a floor finish, water-based styrene acrylic, polymer emulsion for ultra-high speed (UHS) maintenance program. MOR-GLO™ 10 provides a very repairable surface that has a high distinctness of image without compromising the abrasion, soil and shoe scuff resistance associated with high performance floor finishes. 收起 | |
| MOR-GLO™ 2 | Synthomer | MOR-GLO™ 2 is a floor finish, water-based styrene acrylic, polymer emulsion for high traffic applications, such as schools, hospitals and retail. MOR-GLO™ 2 very hard and durable zinc crosslinked polymer provides premium performance in high traffic floor ...展开 MOR-GLO™ 2 is a floor finish, water-based styrene acrylic, polymer emulsion for high traffic applications, such as schools, hospitals and retail. MOR-GLO™ 2 very hard and durable zinc crosslinked polymer provides premium performance in high traffic floor areas. It features excellent black heel mark (BHMR), scuff and dirt resistance. 收起 | |
| MOR-GLO™ 2E | Synthomer | Mor-Glo 2E very hard and durable zinc crosslinked polymer provides premium performance in high traffic floor areas. It features excellent black heel mark (BHMR), scuff and dirt resistance. | |
| MOR-GLO™ 8 | Synthomer | MOR-GLO™ 8 is a floor finish, water-based styrene acrylic, polymer emulsion for high traffic applications, such as schools, hospitals and retail. MOR-GLO™ 8 zinc crosslinked floor finish polymer is used to make premium, well-balanced floor polishes that p...展开 MOR-GLO™ 8 is a floor finish, water-based styrene acrylic, polymer emulsion for high traffic applications, such as schools, hospitals and retail. MOR-GLO™ 8 zinc crosslinked floor finish polymer is used to make premium, well-balanced floor polishes that provide outstanding dirt resistance, reparability, and response to periodic ultra high speed maintenance. 收起 | |
| MOR-GLO™ 877 | Synthomer | MOR-GLO™ 877 is a floor finish, water-based styrene acrylic, polymer emulsion for industrial, residential and general purpose polishes with good wear resistance. MOR-GLO™ 877 general use polymer is frequently recommended for low maintenance floor finishes...展开 MOR-GLO™ 877 is a floor finish, water-based styrene acrylic, polymer emulsion for industrial, residential and general purpose polishes with good wear resistance. MOR-GLO™ 877 general use polymer is frequently recommended for low maintenance floor finishes. It can be used as sole polymer or blended with others. 收起 | |
| MOR-GLO™ G128 | Synthomer | MOR-GLO™ G128 is a zinc-free floor finish, water-based styrene acrylic, polymer emulsion for high traffic applications, such as schools, hospitals and retail. MOR-GLO™ G128 is recommended for low maintenance floor finishes. It can be easily formulated int...展开 MOR-GLO™ G128 is a zinc-free floor finish, water-based styrene acrylic, polymer emulsion for high traffic applications, such as schools, hospitals and retail. MOR-GLO™ G128 is recommended for low maintenance floor finishes. It can be easily formulated into EPA Safer Choice, Green Seal and Ecologo certifiable floor finishes. 收起 | |
| MOR-GLO™ ULTRA AR | Synthomer | MOR-GLO™ ULTRA AR is an alcohol resistant floor finish, water-based styrene acrylic, polymer emulsion for high traffic environments. MOR-GLO™ ULTRA AR provides a very durable, high gloss surface that is resistant to alcohol based hand sanitizers but that ...展开 MOR-GLO™ ULTRA AR is an alcohol resistant floor finish, water-based styrene acrylic, polymer emulsion for high traffic environments. MOR-GLO™ ULTRA AR provides a very durable, high gloss surface that is resistant to alcohol based hand sanitizers but that still retains the reparability and removability of one-component floor finish. 收起 | |
| MOR-GLO™ ULTRA G | Synthomer | MOR-GLO™ ULTRA G is a zinc-free Twin-Linked™, water-based styrene acrylic, polymer emulsion for low or high maintenance floor polish formulations. MOR-GLO™ ULTRA G zinc-free polymer delivers the durability and performance of premium zinc-containing finish...展开 MOR-GLO™ ULTRA G is a zinc-free Twin-Linked™, water-based styrene acrylic, polymer emulsion for low or high maintenance floor polish formulations. MOR-GLO™ ULTRA G zinc-free polymer delivers the durability and performance of premium zinc-containing finishes. It is crosslinked using SYNTHOMER Solutions' Twin-Linked™ technology to deliver premium durability and performance. 收起 | |
| MOR-SHINE™ E | Synthomer | Mor-Shine E is a dry-bright polish concentrate with excellent gloss retention, as well as mar and scratch resistance. Mor-Shine E is used for general purpose finishes that respond to low and high maintenance schedules | |
| NKX 144 | Nokxeller Quimica Ltda | NKX 144 is a small particle size high gloss PU polyesther aliphatic topcoat. It forms a transparent film of medium hardness suitable as a final varnish or topcoat where high gloss, abrasion resistance and clarity are required. When crosslinked, presents e...展开 NKX 144 is a small particle size high gloss PU polyesther aliphatic topcoat. It forms a transparent film of medium hardness suitable as a final varnish or topcoat where high gloss, abrasion resistance and clarity are required. When crosslinked, presents excellent weatherability. It is ideal for use as a topcoat for leather finish and PVC, indoor paints formulation, etc. 收起 | |
| NKX 176 | Nokxeller Quimica Ltda | NKX 176 is a soft and elastic PUD with outstanding film-forming properties. NKX 176 is a NON IONIC VOC free soft non tacky and elastic PUD with outstanding film-forming properties. It can be used as a universal coating resin for textile due to its varied ...展开 NKX 176 is a soft and elastic PUD with outstanding film-forming properties. NKX 176 is a NON IONIC VOC free soft non tacky and elastic PUD with outstanding film-forming properties. It can be used as a universal coating resin for textile due to its varied possibility of uses. NKX 176 has a flexible and soft but non-tacky handle. It has varied applications especially in textile finishes where body handle, durability are required. It is ideal for use as a print binder and as an universal coating resin in textile applications, garment leather finish, and coatings for digital printing in fabrics. 收起 | |
| NKX 183 | Nokxeller Quimica Ltda | NKX 180 based resin, with higher concentration.Multipurpose resin of extreme adhesion, outstanding toughness and abrasion resistance suitable for coatings for the following substrates: plastic, synthetic fabric, metal, shoe finish, etc. Due to its high cr...展开 NKX 180 based resin, with higher concentration.Multipurpose resin of extreme adhesion, outstanding toughness and abrasion resistance suitable for coatings for the following substrates: plastic, synthetic fabric, metal, shoe finish, etc. Due to its high crystalline segment concentration the polymer presents itself tough, yet flexible and resistant. 收起 | |
| NKX 201 NMP-Free | Nokxeller Quimica Ltda | NKX 201 NMP-Free shows excellent chemical, weathering and abrasion resistance due to higher resistance of this kind of polyol. NKX 201 presents wide use possibilities considering its high gloss and transparency properties as in synthetic substrates, as hi...展开 NKX 201 NMP-Free shows excellent chemical, weathering and abrasion resistance due to higher resistance of this kind of polyol. NKX 201 presents wide use possibilities considering its high gloss and transparency properties as in synthetic substrates, as high gloss topcoats in leather finish, wood flooring or print screen putties, metallic applications. 收起 | |
| NKX 240 | Nokxeller Quimica Ltda | NKX 240 is a multipurpose resin of exceptional properties was developed to serve a wide range of applications for flexible and rigid substrates. NKX 240 shows up a clear film with good gloss retention and presents high adhesion and heat resistance. | |
| NKX 245 | Nokxeller Quimica Ltda | NKX-245 is a modified polyester type suitable for glossy aqueous coatings as wood flooring. NKX 245 has a very hard film providing high abrasion resistance, and adhesion and can be easily formulated along with other components such as acrylic resins, pigm...展开 NKX-245 is a modified polyester type suitable for glossy aqueous coatings as wood flooring. NKX 245 has a very hard film providing high abrasion resistance, and adhesion and can be easily formulated along with other components such as acrylic resins, pigment dispersions, fillers, thickeners, etc. 收起 | |
| NKX 250 | Nokxeller Quimica Ltda | NKX-250 is a very hard PUD polyester type adequate for clear or pigmented waterbased topcoat for rigid substrates specially furniture, metal or hard synthetic substrates. Its hard, transparent and glossy film provides good abrasion resistance, adhesion an...展开 NKX-250 is a very hard PUD polyester type adequate for clear or pigmented waterbased topcoat for rigid substrates specially furniture, metal or hard synthetic substrates. Its hard, transparent and glossy film provides good abrasion resistance, adhesion and gloss. 收起 | |
| NKX 274 | Nokxeller Quimica Ltda | NKX 274 is a high solid small particle size resin with excellent chemical resistance. It is adequate for varied market segments wherever is necessary to replace a solventborne for a waterborne paint. Typical uses in metal, soles, PVC, other synthetic subs...展开 NKX 274 is a high solid small particle size resin with excellent chemical resistance. It is adequate for varied market segments wherever is necessary to replace a solventborne for a waterborne paint. Typical uses in metal, soles, PVC, other synthetic substrate paint compositions wherever high gloss, good adhesions and chemical resistance are necessary. 收起 | |
| NKX 279 | Nokxeller Quimica Ltda | NKX 279 is a fine particle size resin and developed to formulate water topcoats of high adhesion and very good chemical resistance. Typical end use applications include top coatings for rigid and flexible substrates including wood, paper, metallic surface...展开 NKX 279 is a fine particle size resin and developed to formulate water topcoats of high adhesion and very good chemical resistance. Typical end use applications include top coatings for rigid and flexible substrates including wood, paper, metallic surface , plastics and especially PVC and other synthetic laminates.NKX 279 is high performance water based coating and can replace traditional solvent based coatings in wide applications possibilities. 收起 | |
| PLEXTOL™ A 6474 | Synthomer | PLEXTOL™ A 6474 is an aqueous dispersion of an acrylic copolymer with heterogeneous particle morphology. PLEXTOL™ A 6474 is a binder for exterior and interior clear or pigmented wood coatings. | |
| PLEXTOL™ B 500 | Synthomer | PLEXTOL B 500 is a pure acrylic with an excellent shear and electrolyte stability. It is highly recommended for silicone paints and artist paints. It shows high flexibility and UV-resistance. Aqueous dispersion of a non-ionic stabilized thermoplastic acry...展开 PLEXTOL B 500 is a pure acrylic with an excellent shear and electrolyte stability. It is highly recommended for silicone paints and artist paints. It shows high flexibility and UV-resistance. Aqueous dispersion of a non-ionic stabilized thermoplastic acrylic polymer. The dispersion is free from film forming aids, APEO, solvents and plasticizers. 收起 | |
| PLEXTOL™ D 498 | Synthomer | PLEXTOL™ D 498 is a finely dispersed aqueous dispersion of a methacrylic ester-acrylic ester copolymer. The dispersion contains an anionic emulsifier system and is free from film forming aids, solvents and plasticizers. PLEXTOL™ D 498 is a low MFFT pure a...展开 PLEXTOL™ D 498 is a finely dispersed aqueous dispersion of a methacrylic ester-acrylic ester copolymer. The dispersion contains an anionic emulsifier system and is free from film forming aids, solvents and plasticizers. PLEXTOL™ D 498 is a low MFFT pure acrylic recommended for saponification resistant exterior masonry coatings and renders. It is highly suitable for silicate coatings and renders and shows non-yellowing and excellent UV resistance. 收起 | |
| PLEXTOL™ D 507 | Synthomer | PLEXTOL™ D 507 is a finely dispersed aqueous dispersion of a methacrylic ester-acrylic ester copolymer. The dispersion contains an anionic emulsifier system and is free from film forming aids, solvents, plasticizers and ammonia. PLEXTOL™ D 507 is a pure a...展开 PLEXTOL™ D 507 is a finely dispersed aqueous dispersion of a methacrylic ester-acrylic ester copolymer. The dispersion contains an anionic emulsifier system and is free from film forming aids, solvents, plasticizers and ammonia. PLEXTOL™ D 507 is a pure acrylic recommended for industrial concrete-roof tile coatings. It shows excellent exterior durability and very high resistance against water-whitening and efflorescence. 收起 | |
| PLEXTOL™ D 512 | Synthomer | PLEXTOL™ D 512 is a finely dispersed aqueous dispersion of a methacrylic ester-acrylic ester copolymer. The dispersion contains an anionic emulsifier system and is free from APEOs, film forming aids, solvents and plasticizers. PLEXTOL™ D 512 is a pure acr...展开 PLEXTOL™ D 512 is a finely dispersed aqueous dispersion of a methacrylic ester-acrylic ester copolymer. The dispersion contains an anionic emulsifier system and is free from APEOs, film forming aids, solvents and plasticizers. PLEXTOL™ D 512 is a pure acrylic binder with excellent exterior durability and water-whitening resistance. It shows a good blocking and dirt-pick up resistance. It is recommended for high quality masonry paints including mosaic plasters. It is as well suitable for concrete roof-tile renovation paints. 收起 | |
| PLEXTOL™ D 977 | Synthomer | PLEXTOL™ D 977 is a water-based dispersion of acrylic copolymer designed for Elastomeric coatings, roof and walls. It provides a good balance between mechanical properties and dirt pick-up resistance thanks to the adjusted internal plastification and UV s...展开 PLEXTOL™ D 977 is a water-based dispersion of acrylic copolymer designed for Elastomeric coatings, roof and walls. It provides a good balance between mechanical properties and dirt pick-up resistance thanks to the adjusted internal plastification and UV surface curing system. 收起 | |
| PLEXTOL™ M 625 | Synthomer | PLEXTOL™ M 625 is a finely dispersed aqueous dispersion of a methacrylic ester-acrylic ester copolymer. The dispersion contains an anionic emulsifier system, and is free from APEO, coalescing agents, solvents, and plasticizers. PLEXTOL™ M 625 is a hard pu...展开 PLEXTOL™ M 625 is a finely dispersed aqueous dispersion of a methacrylic ester-acrylic ester copolymer. The dispersion contains an anionic emulsifier system, and is free from APEO, coalescing agents, solvents, and plasticizers. PLEXTOL™ M 625 is a hard pure acrylic with excellent UV-resistance and exterior durability. It is highly recommended for industrial concrete roof-tile and fibre-cement coatings. It shows an outstanding efflorescence and water-whitening resistance. 收起 | |
| PLEXTOL™ R 100 | Synthomer | PLEXTOL™ R 100 is a surfactant stabilised modified - acrylic copolymer dispersion that forms a flexible, tough film of high water resistance. PLEXTOL™ R 100 is recommended for exterior and interior paints. | |
| PLEXTOL™ R 5335 | Synthomer | PLEXTOL™ R 5335 is a fine particle size, surfactant stabilised aqueous acrylic copolymer dispersion. PLEXTOL™ R 5335 offers high gloss, excellent adhesion and high water resistance. PLEXTOL™ R 5335 is recommended for high performance trim paints and wood ...展开 PLEXTOL™ R 5335 is a fine particle size, surfactant stabilised aqueous acrylic copolymer dispersion. PLEXTOL™ R 5335 offers high gloss, excellent adhesion and high water resistance. PLEXTOL™ R 5335 is recommended for high performance trim paints and wood stains. 收起 | |
| PLEXTOL™ R 5441 | Synthomer | PLEXTOL™ R 5441 is a fine particle size, surfactant stabilised aqueous dispersion of a crosslinked methacrylic ester-acrylic ester copolymer. PLEXTOL™ R 5441 offers high gloss, block resistance, wet ahdesion, alkali and water resitance. PLEXTOL™ R 5441 is...展开 PLEXTOL™ R 5441 is a fine particle size, surfactant stabilised aqueous dispersion of a crosslinked methacrylic ester-acrylic ester copolymer. PLEXTOL™ R 5441 offers high gloss, block resistance, wet ahdesion, alkali and water resitance. PLEXTOL™ R 5441 is recommended for low-to-medium build wood stains and semigloss to silky matt wet room coatings. 收起 | |
| PLEXTOL™ R 5512 | Synthomer | Plextol R 5512 is a water-based pure acrylic copolymer dispersion mainly recommended for Crack bridging wall paints and highly flexible roof coatings. Plextol R 5512 provides high flexibility and expceptional water, alkali and dirt pick-up resistance. It ...展开 Plextol R 5512 is a water-based pure acrylic copolymer dispersion mainly recommended for Crack bridging wall paints and highly flexible roof coatings. Plextol R 5512 provides high flexibility and expceptional water, alkali and dirt pick-up resistance. It contributes a good balance between mechanical properties and dirt pick-up resistance thanks to the adjusted internal plastification and UV surface curing system. 收起 | |
| PLEXTOL™ R 5530 | Synthomer | PLEXTOL™ R 5530 is a fine particle size, surfactant stabilised aqueous dispersion of a crosslinked methacrylic ester-acrylic ester copolymer. PLEXTOL™ R 5530 offers good adhesion and salt spray resistance with a very good adhesion to different substrates....展开 PLEXTOL™ R 5530 is a fine particle size, surfactant stabilised aqueous dispersion of a crosslinked methacrylic ester-acrylic ester copolymer. PLEXTOL™ R 5530 offers good adhesion and salt spray resistance with a very good adhesion to different substrates. PLEXTOL™ R 5530 is recommended for anti-corrosion and Direct to Meta applications with excellent salt spray resistance and perfect adhesion to many substrates. PLEXTOL™ R 5530 is suitable also for multi-substrate primer formulations. 收起 | |
| PLEXTOL™ R 815 | Synthomer | PLEXTOL™ R 815 is a fine particle size, surfactant stabilised aqueous dispersion of a methacrylic ester-acrylic ester copolymer. PLEXTOL™ R 815 offers high gloss, block resistance, wet adhesion, alkali and water resistance. PLEXTOL™ R 815 is recommended f...展开 PLEXTOL™ R 815 is a fine particle size, surfactant stabilised aqueous dispersion of a methacrylic ester-acrylic ester copolymer. PLEXTOL™ R 815 offers high gloss, block resistance, wet adhesion, alkali and water resistance. PLEXTOL™ R 815 is recommended for gloss paints, varnishes and stains. 收起 | |
| PLEXTOL™ R 825 D | Synthomer | PLEXTOL R 825 D is a finely dispersed aqueous acrylic copolymer dispersion. The dispersion contains an anionic emulsifier system and is free from APEO, film forming aids, solvents and plasticizers. PLEXTOL R 825 D is a self-crosslinking multiphase acrylic...展开 PLEXTOL R 825 D is a finely dispersed aqueous acrylic copolymer dispersion. The dispersion contains an anionic emulsifier system and is free from APEO, film forming aids, solvents and plasticizers. PLEXTOL R 825 D is a self-crosslinking multiphase acrylic dispersion. It is highly recommended for gloss and trim paints. It offers high gloss potential, excellent wet adhesion and good blocking resistance. 收起 | |
| PLEXTOL™ R 825 N | Synthomer | Plextol R 825 N is a finely dispersed aqueous acrylic copolymer dispersion. The dispersion contains an anionic emulsifier system and is free from APEO, film forming aids, solvents and plasticizers. PLEXTOL R 825 N is a self-crosslinking multiphase acrylic...展开 Plextol R 825 N is a finely dispersed aqueous acrylic copolymer dispersion. The dispersion contains an anionic emulsifier system and is free from APEO, film forming aids, solvents and plasticizers. PLEXTOL R 825 N is a self-crosslinking multiphase acrylic dispersion. It is highly recommended for gloss and trim paints. It offers high gloss potential, excellent wet adhesion and good blocking resistance. 收起 | |
| PLEXTOL™ ULTRAFINE LS 5000 | Synthomer | PLEXTOL ULTRAFINE LS 5000 is an ultra fine particle size, surfactant stabilized aqueous dispersion of a methacrylic ester-acrylic ester and vinyl versatate copolymer with translucent appearance. PLEXTOL ULTRAFINE LS 5000 shows excellent penetration and bi...展开 PLEXTOL ULTRAFINE LS 5000 is an ultra fine particle size, surfactant stabilized aqueous dispersion of a methacrylic ester-acrylic ester and vinyl versatate copolymer with translucent appearance. PLEXTOL ULTRAFINE LS 5000 shows excellent penetration and binding properties especially for surfaces which may be subjected to significant dimensional changes. PLEXTOL ULTRAFINE LS 5000 is recommended for wood stains formulation for interior and exterior application. 收起 | |
| PLEXTOL™ ULTRAFINE PR 3500 | Synthomer | PLEXTOL™ ULTRAFINE PR 3500 is an aqueous dispersion of acrylic copolymer with a very fine particle size. | |
| PLEXTOL™ ULTRAGREEN 3852 | Synthomer | PLEXTOL™ ULTRAGREEN 3852 is an ammonia-free aqueous dispersion of an acrylic copolymer. PLEXTOL™ ULTRAGREEN 3852 is designed for formulating environmentally friendly low odour interior and exterior masonry coatings (façade coatings and synthetic resin pla...展开 PLEXTOL™ ULTRAGREEN 3852 is an ammonia-free aqueous dispersion of an acrylic copolymer. PLEXTOL™ ULTRAGREEN 3852 is designed for formulating environmentally friendly low odour interior and exterior masonry coatings (façade coatings and synthetic resin plasters). 收起 | |
| PLEXTOL™ W 1078 | Synthomer | PLEXTOL™ W 1078 is a multiphase, self-crosslinking acrylic copolymer dispersion designed for interior use for varnish and stain formulations of parquet and furniture. | |
| PLIOCRYL™ 4526 | Synthomer | Pliocryl 4526 is an orthophthalic unsaturated polyester solvent-based resin. Mainly recommended for two-component traffic marking paints, especially pedestrian crossings, parking lots, streets, auxiliary markings. Pliocryl 4526 provides a good balance of ...展开 Pliocryl 4526 is an orthophthalic unsaturated polyester solvent-based resin. Mainly recommended for two-component traffic marking paints, especially pedestrian crossings, parking lots, streets, auxiliary markings. Pliocryl 4526 provides a good balance of flexibility and hardness after curing, as well as weather and abrasion resistances. 收起 | |
| PLIOCRYL™ 4600 | Synthomer | Pliocryl 4600 is a thermoplastic solvent-based styrene-acrylic copolymer. It provides extremely fast drying, high hardness and good water resistance properties. Mainly recommended for traffic marking and floor paints. | |
| PLIOCRYL™ 4660 | Synthomer | Pliocryl 4660 is a thermoplastic solvent-based styrene-acrylic copolymer. It provides fast drying, good mechanical properties and good water resistance. Mainly recommended for swimming pools paints as well as floor and traffic marking paints. | |
| PLIOLITE® AC4 | Synthomer | PLIOLITE® AC4 is a styrene-acrylate copolymer, often used in combination with PLIOLITE® AC80, to form tough abrasion and chemically resistant films that have excellent UV resistance and exterior weathering properties. Solvent based thixotropic resin for l...展开 PLIOLITE® AC4 is a styrene-acrylate copolymer, often used in combination with PLIOLITE® AC80, to form tough abrasion and chemically resistant films that have excellent UV resistance and exterior weathering properties. Solvent based thixotropic resin for low to high textured exterior masonry coatings, primers, anti-corrosion coatings, concrete protection and intumescent coatings. 收起 | |
| PLIOLITE® AC5-G | Synthomer | PLIOLITE® AC5G is a styrene-acrylate copolymer, often used in combination with PLIOLITE® AC80, to form tough abrasion and chemically resistant films that have excellent UV resistance and exterior weathering properties. Solvent based pseudoplastic resin fo...展开 PLIOLITE® AC5G is a styrene-acrylate copolymer, often used in combination with PLIOLITE® AC80, to form tough abrasion and chemically resistant films that have excellent UV resistance and exterior weathering properties. Solvent based pseudoplastic resin for low to high build exterior masonry coatings, primers, anti-corrosion coatings, concrete protection and intumescent coatings. 收起 | |
| PLIOLITE® AC90 | Synthomer | PLIOLITE® AC90 styrene-acrylate copolymer provides excellent water resistence and durability. Its melt rheology and synergy with other intumescent raw materials delivers outstanding char consistency and fire resistance. Newtonian resin for high performanc...展开 PLIOLITE® AC90 styrene-acrylate copolymer provides excellent water resistence and durability. Its melt rheology and synergy with other intumescent raw materials delivers outstanding char consistency and fire resistance. Newtonian resin for high performance intumescent coatings. 收起 | |
| PLIOLITE® LV72 | Synthomer | PLIOLITE® LV 72 is a low viscosity styrene-acrylate copolymer with high pigment binding properties that forms tough, abrasion and alkali resistant films with excellent adhesion to concrete and steel, and with very good water and chemical resistance. Newto...展开 PLIOLITE® LV 72 is a low viscosity styrene-acrylate copolymer with high pigment binding properties that forms tough, abrasion and alkali resistant films with excellent adhesion to concrete and steel, and with very good water and chemical resistance. Newtonian resin giving low viscosity solutions, with very good sprayability, for formulation of swimming pool paints and as a replacement for chlorinated rubber. 收起 | |
| PLIOLITE® VTAC-L | Synthomer | PLIOLITE® VTAC-L is a highly soluble, vinyl toluene-acrylate copolymer that forms tough, durable films with excellent adhesion to concrete and steel, with very good water and chemical resistance. Newtonian resin soluble in mineral spirits, for formulation...展开 PLIOLITE® VTAC-L is a highly soluble, vinyl toluene-acrylate copolymer that forms tough, durable films with excellent adhesion to concrete and steel, with very good water and chemical resistance. Newtonian resin soluble in mineral spirits, for formulation of flat or textured masonry coatings, alkali resistant primers, anticorrosion paints and intumescent coatings. 收起 | |
| PLIOTEC™ 115 | Synthomer | PLIOTEC™ 115 is a vinyl-acetate resin with excellent adhesion to polyurethane foam and other substrates. It imparts fast drying and ease of application to intumescent coatings used on non-metallic substrates. Water-borne resin for intumescent coatings for...展开 PLIOTEC™ 115 is a vinyl-acetate resin with excellent adhesion to polyurethane foam and other substrates. It imparts fast drying and ease of application to intumescent coatings used on non-metallic substrates. Water-borne resin for intumescent coatings for PU foams. 收起 | |
| PLIOTEC® 7104E | Synthomer | Pliotec 7104E is high Tg styrene acrylic latex that provides excellent adhesion to concrete and resistance to chemicals. It allows formulation of floor coatings that exhibits superior resistance to abrasion and hot tire pick-up. Pliotec 7104E can be used ...展开 Pliotec 7104E is high Tg styrene acrylic latex that provides excellent adhesion to concrete and resistance to chemicals. It allows formulation of floor coatings that exhibits superior resistance to abrasion and hot tire pick-up. Pliotec 7104E can be used to formulate garage floor coatings, masonry primers and waterproofing sealers. 收起 | |
| PLIOTEC® CR30 | Synthomer | PLIOTEC® CR30 self-crosslinking styrene acrylic latex provides excellent chemical resistance, and is suitable for low VOC concrete floor paints. Water-based self-crosslinking resin for garage, basement and laundry room floor paints. | |
| PLIOTEC® CR78 | Synthomer | PLIOTEC® CR78 self-crosslinking styrene acrylic latex provides excellent chemical resistance, and superior hot-tire pick-up resistance, suitable for low VOC garage floor paints. Water-based styrene acrylic resin for garage floor paints and institutional w...展开 PLIOTEC® CR78 self-crosslinking styrene acrylic latex provides excellent chemical resistance, and superior hot-tire pick-up resistance, suitable for low VOC garage floor paints. Water-based styrene acrylic resin for garage floor paints and institutional wall coverings. 收起 | |
| PLIOTEC® CS24 | Synthomer | Pliotec CS24 is a water-based modified acrylic and adipic acid dihydride-free binder recommended for High gloss wood trim paints. It provides excellent blocking and cracking resistance with high gloss capability. | |
| PLIOTEC® EL25 | Synthomer | PLIOTEC® EL25 acrylic elastomeric latex provides excellent tensile/elongation properties, superior dirt pick-up resistance, great adhesion to concrete und UV resistance. Water-based elastomeric resin for vertical masonry coatings, roofing and tilt up coat...展开 PLIOTEC® EL25 acrylic elastomeric latex provides excellent tensile/elongation properties, superior dirt pick-up resistance, great adhesion to concrete und UV resistance. Water-based elastomeric resin for vertical masonry coatings, roofing and tilt up coatings. 收起 | |
| PLIOTEC™ HDT12 | Synthomer | PLIOTEC™ HDT12 is a modified styrene-acrylic copolymer latex based on Hydrophobic Dispersion Technology, with excellent adhesion to metals, and superior water resistance, delivering corrosion protection even without the use of anticorrosive pigments. PLIO...展开 PLIOTEC™ HDT12 is a modified styrene-acrylic copolymer latex based on Hydrophobic Dispersion Technology, with excellent adhesion to metals, and superior water resistance, delivering corrosion protection even without the use of anticorrosive pigments. PLIOTEC™ HDT12 is recommended for Direct-To-Metal (DTM) coatings, from high gloss enamels to anticorrosive primers. 收起 | |
| PLIOTEC® HDT16 | Synthomer | PLIOTEC® HDT16 modified styrene-acrylic copolymer latex provides excellent water and corrosion resistance, fast hardness development and superior adhesion to a wide variety of substrates (ferrous and non-ferrous metals, ceramic tiles, PVC and more). Water...展开 PLIOTEC® HDT16 modified styrene-acrylic copolymer latex provides excellent water and corrosion resistance, fast hardness development and superior adhesion to a wide variety of substrates (ferrous and non-ferrous metals, ceramic tiles, PVC and more). Water-based resin for anti-corrosion paints and primers, Direct-To-Metal (DTM) coatings and multi-surface renovation paints. 收起 |
