| Epoxy Resin E-12 | Anhui Shanfu New Material Technology Co., Ltd. | Epoxy Resin E-12 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a light yellow, solid granular powder that has good electrostatic spraying performance, chemical resistance, and anti-corrosive properties. It can be used in epoxy polye...展开 Epoxy Resin E-12 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a light yellow, solid granular powder that has good electrostatic spraying performance, chemical resistance, and anti-corrosive properties. It can be used in epoxy polyester powder coatings, or mixed with an amine curing agent for use in anti-corrosion and insulation coatings. 收起 | |
| Epoxy Resin E-14 | Anhui Shanfu New Material Technology Co., Ltd. | Epoxy Resin E-14 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a light yellow, solid granular powder that has good electrostatic spraying performance, chemical resistance, and anti-corrosive properties. It can be used in top-grade e...展开 Epoxy Resin E-14 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a light yellow, solid granular powder that has good electrostatic spraying performance, chemical resistance, and anti-corrosive properties. It can be used in top-grade epoxy polyester powder coatings, electrophoretic paints, and anti-corrosion coatings. 收起 | |
| Epoxy Resin E-20 | Anhui Shanfu New Material Technology Co., Ltd. | Epoxy Resin E-20 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a light yellow, solid granular powder that has good bending performance, chemical resistance, solvent resistance, and strong adhesion properties. It can be used in anti-...展开 Epoxy Resin E-20 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a light yellow, solid granular powder that has good bending performance, chemical resistance, solvent resistance, and strong adhesion properties. It can be used in anti-corrosion coatings, zinc powder primers, floor coatings, decorative coatings and varnishes. 收起 | |
| Epoxy Resin SF801 | Anhui Shanfu New Material Technology Co., Ltd. | Epoxy Resin SF801 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a transparent granular powder that is curable at room temperature or higher temperatures. It can be used in anti-corrosion coatings, electrophoretic paint, floor coatin...展开 Epoxy Resin SF801 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a transparent granular powder that is curable at room temperature or higher temperatures. It can be used in anti-corrosion coatings, electrophoretic paint, floor coatings, decorative coatings, and powder coatings. It has an epoxy equivalent of 450-520 g/eq and a softening point of 65-75°C. 收起 | |
| Epoxy Resin SF801A | Anhui Shanfu New Material Technology Co., Ltd. | Epoxy Resin SF801A is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a transparent granular powder that is curable at room temperature or higher temperatures. It can be used in anti-corrosion coatings, electrophoretic paint, floor coati...展开 Epoxy Resin SF801A is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a transparent granular powder that is curable at room temperature or higher temperatures. It can be used in anti-corrosion coatings, electrophoretic paint, floor coatings, decorative coatings, and powder coatings. It has an epoxy equivalent of 530-570 g/eq and a softening point of 65-75°C. 收起 | |
| Epoxy Resin SF808 | Anhui Shanfu New Material Technology Co., Ltd. | Epoxy Resin SF808 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a transparent, solid granular powder that has good electrostatic spraying performance and plate leveling capacity. It can be used in top-grade epoxy polyester powder co...展开 Epoxy Resin SF808 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a transparent, solid granular powder that has good electrostatic spraying performance and plate leveling capacity. It can be used in top-grade epoxy polyester powder coatings, electrophoretic paints, and anti-corrosion coatings. 收起 | |
| Epoxy Resin SF818 | Anhui Shanfu New Material Technology Co., Ltd. | Epoxy Resin SF818 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a transparent, solid granular powder that has good mechanical performance and electrostatic spraying performance. It can be used in electrophoretic paints, top-grade ep...展开 Epoxy Resin SF818 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a transparent, solid granular powder that has good mechanical performance and electrostatic spraying performance. It can be used in electrophoretic paints, top-grade epoxy poleyster powder coatings, and anti-corrosion coatings. 收起 | |
| Epoxy Resin SF828 | Anhui Shanfu New Material Technology Co., Ltd. | Epoxy Resin SF828 is a MMW solid Bisphenol-A type epoxy resin. This product appears as a transparent, solid granular powder that has good electrostatic spraying performance, chemical resistance, and high impact strength. It can be used in electrophoretic ...展开 Epoxy Resin SF828 is a MMW solid Bisphenol-A type epoxy resin. This product appears as a transparent, solid granular powder that has good electrostatic spraying performance, chemical resistance, and high impact strength. It can be used in electrophoretic paints, top-grade epoxy polyester powder coatings, and anti-corrosion coatings. 收起 | |
| Epoxy Resin SF838 | Anhui Shanfu New Material Technology Co., Ltd. | Epoxy Resin SF838 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a transparent, solid granular powder that has good chemical resistance, electrostatic spraying performance, and anti-corrosive properties. It can be used in electrophor...展开 Epoxy Resin SF838 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a transparent, solid granular powder that has good chemical resistance, electrostatic spraying performance, and anti-corrosive properties. It can be used in electrophoretic paints and anti-corrosion coatings. 收起 | |
| HIGREE™ GD120 | Qingdao Higree Chemical Co., Ltd. | HIGREE™ GD120 is a hydrocarbon resin with a low molecular weight and excellent resistance to acid, alkalies, and moisture. It has a specific gravity of 1.09-1.13 g/cm3 and an ash content of 0.05%. This product is manufactured from aromatic petroleum-deriv...展开 HIGREE™ GD120 is a hydrocarbon resin with a low molecular weight and excellent resistance to acid, alkalies, and moisture. It has a specific gravity of 1.09-1.13 g/cm3 and an ash content of 0.05%. This product is manufactured from aromatic petroleum-derived monomers, and it is primarily used as an additive in hot melt adhesives, solvent based adhesives, and industrial paints. 收起 | |
| HIGREE™ GD130 | Qingdao Higree Chemical Co., Ltd. | HIGREE™ GD130 is a hydrocarbon resin with a low molecular weight and excellent resistance to acid, alkalies, and moisture. It has a specific gravity of 1.09-1.13 g/cm3 and an ash content of 0.05%. This product is manufactured from aromatic petroleum-deriv...展开 HIGREE™ GD130 is a hydrocarbon resin with a low molecular weight and excellent resistance to acid, alkalies, and moisture. It has a specific gravity of 1.09-1.13 g/cm3 and an ash content of 0.05%. This product is manufactured from aromatic petroleum-derived monomers, and it is primarily used as an additive in hot melt adhesives, solvent based adhesives, and industrial paints. 收起 | |
| HIGREE™ GL100 | Qingdao Higree Chemical Co., Ltd. | HIGREE™ GL100 is a light color thermoplastic hydrocarbon resin with low odor. It has a specific gravity of 1.09-1.13 g/cm3 and an ash content of 0.05%. This product is manufactured from purified aromatic petroleum-derived monomers, and it is primarily use...展开 HIGREE™ GL100 is a light color thermoplastic hydrocarbon resin with low odor. It has a specific gravity of 1.09-1.13 g/cm3 and an ash content of 0.05%. This product is manufactured from purified aromatic petroleum-derived monomers, and it is primarily used as an additive in hot melt adhesives and industrial paints. 收起 | |
| HIGREE™ GL120 | Qingdao Higree Chemical Co., Ltd. | HIGREE™ GL120 is a light color thermoplastic hydrocarbon resin with low odor. It has a specific gravity of 1.09-1.13 g/cm3 and an ash content of 0.05%. This product is manufactured from purified aromatic petroleum-derived monomers, and it is primarily use...展开 HIGREE™ GL120 is a light color thermoplastic hydrocarbon resin with low odor. It has a specific gravity of 1.09-1.13 g/cm3 and an ash content of 0.05%. This product is manufactured from purified aromatic petroleum-derived monomers, and it is primarily used as an additive in hot melt adhesives and industrial paints. 收起 | |
| HIGREE™ GP120 | Qingdao Higree Chemical Co., Ltd. | HIGREE™ GP120 is a light color thermoplastic hydrocarbon resin with low odor. It has a specific gravity of 1.09-1.13 g/cm3 and an ash content of 0.05%. This product is manufactured from purified aromatic petroleum-derived monomers, and it is primarily use...展开 HIGREE™ GP120 is a light color thermoplastic hydrocarbon resin with low odor. It has a specific gravity of 1.09-1.13 g/cm3 and an ash content of 0.05%. This product is manufactured from purified aromatic petroleum-derived monomers, and it is primarily used as an additive in hot melt adhesives and industrial paints. 收起 | |
| HIGREE™ GP130 | Qingdao Higree Chemical Co., Ltd. | HIGREE™ GP130 is a light color thermoplastic hydrocarbon resin with low odor. It has a specific gravity of 1.09-1.13 g/cm3 and an ash content of 0.05%. This product is manufactured from purified aromatic petroleum-derived monomers, and it is primarily use...展开 HIGREE™ GP130 is a light color thermoplastic hydrocarbon resin with low odor. It has a specific gravity of 1.09-1.13 g/cm3 and an ash content of 0.05%. This product is manufactured from purified aromatic petroleum-derived monomers, and it is primarily used as an additive in hot melt adhesives and industrial paints. 收起 | |
| HIGREE™ GP140 | Qingdao Higree Chemical Co., Ltd. | HIGREE™ GP140 is a light color thermoplastic hydrocarbon resin with low odor. It has a specific gravity of 1.09-1.13 g/cm3 and an ash content of 0.05%. This product is manufactured from purified aromatic petroleum-derived monomers, and it is primarily use...展开 HIGREE™ GP140 is a light color thermoplastic hydrocarbon resin with low odor. It has a specific gravity of 1.09-1.13 g/cm3 and an ash content of 0.05%. This product is manufactured from purified aromatic petroleum-derived monomers, and it is primarily used as an additive in hot melt adhesives and industrial paints. 收起 | |
| HIGREE™ GP150 | Qingdao Higree Chemical Co., Ltd. | HIGREE™ GP150 is a light color thermoplastic hydrocarbon resin with low odor. It has a specific gravity of 1.09-1.13 g/cm3 and an ash content of 0.05%. This product is manufactured from purified aromatic petroleum-derived monomers, and it is primarily use...展开 HIGREE™ GP150 is a light color thermoplastic hydrocarbon resin with low odor. It has a specific gravity of 1.09-1.13 g/cm3 and an ash content of 0.05%. This product is manufactured from purified aromatic petroleum-derived monomers, and it is primarily used as an additive in hot melt adhesives, inks, and industrial paints. 收起 | |
| HIGREE™ GR100 | Qingdao Higree Chemical Co., Ltd. | HIGREE™ GR100 is a pale yellow thermoplastic hydrocarbon resin with low molecular weight. It has a specific gravity of 1.09-1.13 g/cm3 and an ash content of 0.05%. This product has good resistance to alkalies and acid, and it is primarily used as an addit...展开 HIGREE™ GR100 is a pale yellow thermoplastic hydrocarbon resin with low molecular weight. It has a specific gravity of 1.09-1.13 g/cm3 and an ash content of 0.05%. This product has good resistance to alkalies and acid, and it is primarily used as an additive in industrial paints. 收起 | |
| HIGREE™ GR120 | Qingdao Higree Chemical Co., Ltd. | HIGREE™ GR120 is a pale yellow thermoplastic hydrocarbon resin with low molecular weight. It has a specific gravity of 1.09-1.13 g/cm3 and an ash content of 0.05%. This product has good resistance to alkalies and acid, and it is primarily used as an addit...展开 HIGREE™ GR120 is a pale yellow thermoplastic hydrocarbon resin with low molecular weight. It has a specific gravity of 1.09-1.13 g/cm3 and an ash content of 0.05%. This product has good resistance to alkalies and acid, and it is primarily used as an additive in industrial paints and solvent adhesives. 收起 | |
| HIGREE™ GV100 | Qingdao Higree Chemical Co., Ltd. | HIGREE™ GV100 is a light color thermoplastic hydrocarbon resin with low molecular weight. It has a specific gravity of 1.09-1.13 g/cm3 and an ash content of 0.05%. This product has excellent resistance to alkalies, moisture, and acid, and it is primarily ...展开 HIGREE™ GV100 is a light color thermoplastic hydrocarbon resin with low molecular weight. It has a specific gravity of 1.09-1.13 g/cm3 and an ash content of 0.05%. This product has excellent resistance to alkalies, moisture, and acid, and it is primarily used as an additive in industrial paints and hot melt adhesives. 收起 | |
| HIGREE™ GV120 | Qingdao Higree Chemical Co., Ltd. | HIGREE™ GV120 is a light color thermoplastic hydrocarbon resin with low molecular weight. It has a specific gravity of 1.09-1.13 g/cm3 and an ash content of 0.05%. This product has excellent resistance to alkalies, moisture, and acid, and it is primarily ...展开 HIGREE™ GV120 is a light color thermoplastic hydrocarbon resin with low molecular weight. It has a specific gravity of 1.09-1.13 g/cm3 and an ash content of 0.05%. This product has excellent resistance to alkalies, moisture, and acid, and it is primarily used as an additive in industrial paints, inks, and hot melt adhesives. 收起 | |
| HIGREE™ GV130 | Qingdao Higree Chemical Co., Ltd. | HIGREE™ GV130 is a light color thermoplastic hydrocarbon resin with low molecular weight. It has a specific gravity of 1.09-1.13 g/cm3 and an ash content of 0.05%. This product has excellent resistance to alkalies, moisture, and acid, and it is primarily ...展开 HIGREE™ GV130 is a light color thermoplastic hydrocarbon resin with low molecular weight. It has a specific gravity of 1.09-1.13 g/cm3 and an ash content of 0.05%. This product has excellent resistance to alkalies, moisture, and acid, and it is primarily used as an additive in industrial paints, inks, and adhesives. 收起 | |
| HIGREE™ GV140 | Qingdao Higree Chemical Co., Ltd. | HIGREE™ GV140 is a light color thermoplastic hydrocarbon resin with low molecular weight. It has a specific gravity of 1.09-1.13 g/cm3 and an ash content of 0.05%. This product has excellent resistance to alkalies, moisture, and acid, and it is primarily ...展开 HIGREE™ GV140 is a light color thermoplastic hydrocarbon resin with low molecular weight. It has a specific gravity of 1.09-1.13 g/cm3 and an ash content of 0.05%. This product has excellent resistance to alkalies, moisture, and acid, and it is primarily used as an additive in industrial paints, printing inks, and hot melt adhesives. 收起 | |
| HIGREE™ GV150 | Qingdao Higree Chemical Co., Ltd. | HIGREE™ GV150 is a light color thermoplastic hydrocarbon resin with low molecular weight. It has a specific gravity of 1.09-1.13 g/cm3 and an ash content of 0.05%. This product has excellent resistance to alkalies, moisture, and acid, and it is primarily ...展开 HIGREE™ GV150 is a light color thermoplastic hydrocarbon resin with low molecular weight. It has a specific gravity of 1.09-1.13 g/cm3 and an ash content of 0.05%. This product has excellent resistance to alkalies, moisture, and acid, and it is primarily used as an additive in industrial paints, printing inks, and hot melt adhesives. 收起 | |
| STANLUX® Paste 100 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 100 is a leafing type aluminum paste made of lamellar particles covered with stearic acid. This product creates a unique shiny aesthetic effect that provides the applied system with a protective barrier, coverage, corrosion resistance, and ...展开 STANLUX® Paste 100 is a leafing type aluminum paste made of lamellar particles covered with stearic acid. This product creates a unique shiny aesthetic effect that provides the applied system with a protective barrier, coverage, corrosion resistance, and thermal reflection. STANLUX® Paste 100 is specially recommended for formulation systems with low tolerance to aliphatic solvent and is commonly used for maintenance and general industrial paints. 收起 | |
| STANLUX® Paste 100N | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 100N is a non-leafing type aluminum paste made of lamellar particles covered with stearic acid. This product creates a unique shiny aesthetic effect that provides the applied system with a protective barrier, coverage, corrosion resistance,...展开 STANLUX® Paste 100N is a non-leafing type aluminum paste made of lamellar particles covered with stearic acid. This product creates a unique shiny aesthetic effect that provides the applied system with a protective barrier, coverage, corrosion resistance, and thermal reflection. STANLUX® Paste 100N is specially recommended for formulation systems with low tolerance to aliphatic solvent and is commonly used for maintenance, protective, or marine coatings. 收起 | |
| STANLUX® Paste 1100 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 1100 is a non-leafing type aluminum paste made of lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1100 is specially recommended for formulation...展开 STANLUX® Paste 1100 is a non-leafing type aluminum paste made of lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1100 is specially recommended for formulation systems with low tolerance to aliphatic solvent and is commonly used for maintenance, protective and marine coatings, and roof coatings. It has an average particle size of 18 microns and uses a combined solvent of MS (Mineral Spirit) and HA (High Aromatic.) 收起 | |
| STANLUX® Paste 1100N | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 1100N is a non-leafing type aluminum paste made of lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1100N is specially recommended for formulatio...展开 STANLUX® Paste 1100N is a non-leafing type aluminum paste made of lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1100N is specially recommended for formulation systems with low tolerance to aliphatic solvent and is commonly used for maintenance, protective and marine coatings, and roof coatings. It has an average particle size of 18 microns and uses High Aromatic solvent. 收起 | |
| STANLUX® Paste 1120 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 1120 is a non-leafing type aluminum paste made of lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1120 is specially recommended for formulation ...展开 STANLUX® Paste 1120 is a non-leafing type aluminum paste made of lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1120 is specially recommended for formulation systems with low tolerance to aliphatic solvent and is commonly used for maintenance, protective and marine coatings, and roof coatings. It has an average particle size of 17 microns and uses a combined solvent of MS (Mineral Spirit) and HA (High Aromatic.) 收起 | |
| STANLUX® Paste 1130 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 1130 is a non-leafing type aluminum paste made of fine lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1130 is specially recommended for use in ...展开 STANLUX® Paste 1130 is a non-leafing type aluminum paste made of fine lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1130 is specially recommended for use in decorative paints, industrial paints, maintenance, protective and marine coatings, and trade paints. It has an average particle size of 11 microns and uses a combined solvent of MS (Mineral Spirit) and HA (High Aromatic.) 收起 | |
| STANLUX® Paste 120 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 120 is a leafing type aluminum paste made of lamellar particles covered with stearic acid. This product has a high leafing value that adds a durable and protective property to paints. STANLUX® Paste 120 commonly used for general industrial...展开 STANLUX® Paste 120 is a leafing type aluminum paste made of lamellar particles covered with stearic acid. This product has a high leafing value that adds a durable and protective property to paints. STANLUX® Paste 120 commonly used for general industrial paints, decorative and/or architectural paints, and maintenance paints. It has an average particle size of 17 microns and a minimum water coverage of 20,000 cm2/g. 收起 | |
| STANLUX® Paste 130 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 130 is a leafing type aluminum paste made of lamellar particles covered with stearic acid. This product has a high leafing value that adds a durable and protective property to paints. STANLUX® Paste 130 commonly used for general industrial ...展开 STANLUX® Paste 130 is a leafing type aluminum paste made of lamellar particles covered with stearic acid. This product has a high leafing value that adds a durable and protective property to paints. STANLUX® Paste 130 commonly used for general industrial paints, decorative and/or architectural paints, and maintenance paints. It has an average particle size of 19 microns and a minimum water coverage of 21,000 cm2/g. 收起 | |
| STANLUX® Paste 130N | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 130N is a leafing type aluminum paste made of lamellar particles covered with stearic acid. This product has a high leafing value that adds a durable and protective property to paints. STANLUX® Paste 130N is specially recommended for applic...展开 STANLUX® Paste 130N is a leafing type aluminum paste made of lamellar particles covered with stearic acid. This product has a high leafing value that adds a durable and protective property to paints. STANLUX® Paste 130N is specially recommended for application in formulations based on resins that are incompatible with aliphatic solvents and is commonly used for general industrial paints, decorative and/or architectural paints, and maintenance paints. It has an average particle size of 19 microns and a minimum water coverage of 21,000 cm2/g. 收起 | |
| STANLUX® Paste 140 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 140 is a leafing type aluminum paste made of lamellar particles covered with stearic acid. This product has a high leafing value that adds a durable and protective property to paints. STANLUX® Paste 140 is recommended for application in for...展开 STANLUX® Paste 140 is a leafing type aluminum paste made of lamellar particles covered with stearic acid. This product has a high leafing value that adds a durable and protective property to paints. STANLUX® Paste 140 is recommended for application in formulations that require aluminium pigment with high metallic effect and is commonly used for general industrial paints, decorative and/or architectural paints, and maintenance paints. It has an average particle size of 19 microns and a minimum water coverage of 21,000 cm2/g. 收起 | |
| STANLUX® Paste 1600 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 1600 is a non-leafing type aluminum paste made of lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1600 is considered to be standard level and is...展开 STANLUX® Paste 1600 is a non-leafing type aluminum paste made of lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1600 is considered to be standard level and is recommended for paint formulations that require aluminium pigment with high metallic effect including: aerosol spray decorative paints, industrial paints, maintenance paints, protective and marine coatings, and trade paints. It has an average particle size of 23 microns and uses a combined solvent of MS (Mineral Spirit) and HA (High Aromatic.) 收起 | |
| STANLUX® Paste 1600N | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 1600N is a non-leafing type aluminum paste made of lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1600N is considered to be standard level and ...展开 STANLUX® Paste 1600N is a non-leafing type aluminum paste made of lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1600N is considered to be standard level and is recommended for formulation systems with low tolerance to aliphatic solvent. It has an average particle size of 23 microns and uses a HA (High Aromatic) solvent. Applications include: aerosol spray decorative paints, industrial paints, maintenance paints, protective and marine coatings, and trade paints. 收起 | |
| STANLUX® Paste 166 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 166 is a leafing type aluminum paste made of medium size lamellar particles covered with stearic acid. STANLUX® Paste 166 is recommended for application in high grade and brilliant protective paints and is commonly used for decorative paint...展开 STANLUX® Paste 166 is a leafing type aluminum paste made of medium size lamellar particles covered with stearic acid. STANLUX® Paste 166 is recommended for application in high grade and brilliant protective paints and is commonly used for decorative paints, industrial paints, and trade paints. It has an average particle size of 15 microns and a minimum water coverage of 22,000cm2/g. 收起 | |
| STANLUX® Paste 1700 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 1700 is a non-leafing type aluminum paste made of lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1700 is considered to be standard level and is...展开 STANLUX® Paste 1700 is a non-leafing type aluminum paste made of lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1700 is considered to be standard level and is recommended for formulation systems with low tolerance to aliphatic solvent. It has an average particle size of 21 microns and uses a HA (High Aromatic) and MS (Mineral Spirit) solvent. Applications include: aerosol spray decorative paints, industrial paints, maintenance paints, protective and marine coatings, and trade paints. 收起 | |
| STANLUX® Paste 1770 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 1770 is a non-leafing type aluminum paste made of medium lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1770 is considered to be standard level...展开 STANLUX® Paste 1770 is a non-leafing type aluminum paste made of medium lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1770 is considered to be standard level and is recommended for formulation systems with low tolerance to aliphatic solvent. It has an average particle size of 16 microns and uses a HA (High Aromatic) and MS (Mineral Spirit) solvent. Applications include: aerosol spray decorative paints, industrial paints, maintenance paints, protective and marine coatings, and trade paints. 收起 | |
| STANLUX® Paste 1770/60 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 1770/60 is a non-leafing type aluminum paste made of medium lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1770/60 is considered to be standard...展开 STANLUX® Paste 1770/60 is a non-leafing type aluminum paste made of medium lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1770/60 is considered to be standard level and is recommended for formulation systems with low tolerance to aliphatic solvent. It has an average particle size of 16 microns and uses a HA (High Aromatic) and MS (Mineral Spirit) solvent. STANLUX® Paste 1770/60 has the same characteristics of Stanlux Paste 1770 with 60% of solids. Applications include: aerosol spray decorative paints, industrial paints, maintenance paints, protective and marine coatings, and trade paints. 收起 | |
| STANLUX® Paste 1870 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 1870 is a non-leafing type aluminum paste made of medium lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1870 is considered to be standard level...展开 STANLUX® Paste 1870 is a non-leafing type aluminum paste made of medium lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1870 is considered to be standard level and is recommended for systems requiring differentiated metallic finishes, brighter color, and high hiding power. It has an average particle size of 16 microns and uses a HA (High Aromatic) and MS (Mineral Spirit) solvent. Applications include: aerosol spray decorative paints, industrial paints, and trade paints. 收起 | |
| STANLUX® Paste 1900 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 1900 is a non-leafing type aluminum paste made of coarse lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1900 is considered to be standard level...展开 STANLUX® Paste 1900 is a non-leafing type aluminum paste made of coarse lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1900 is considered to be standard level and is recommended for systems requiring protective properties. It has an average particle size of 32 microns and uses a HA (High Aromatic) and MS (Mineral Spirit) solvent. Applications include: industrial paints, maintenance, protective and marine coatings. 收起 | |
| STANLUX® Paste 2000 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 2000 is a non-leafing type aluminum paste made of medium lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 2000 is considered to be standard level...展开 STANLUX® Paste 2000 is a non-leafing type aluminum paste made of medium lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 2000 is considered to be standard level and is recommended for systems requiring differentiated metallic effects, and brighter metallic pigment. It has an average particle size of 21 microns and uses a HA (High Aromatic) and MS (Mineral Spirit) solvent. Applications include: decorative paints, industrial paints, and trade paints. 收起 | |
| STANLUX® Paste 340 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 340 is a leafing type aluminum paste made of coarse lamellar particles covered with stearic acid that provide a reflection effect or barrier protection. STANLUX® Paste 340 is specially recommended for printing inks and is commonly used for ...展开 STANLUX® Paste 340 is a leafing type aluminum paste made of coarse lamellar particles covered with stearic acid that provide a reflection effect or barrier protection. STANLUX® Paste 340 is specially recommended for printing inks and is commonly used for maintenance, protective and marine coatings, and roof coatings. It has an average particle size of 21 microns and a minimum water coverage of 9,000 cm2/g. 收起 | |
| STANLUX® Paste 340N | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 340N is a leafing type aluminum paste made of coarse lamellar particles covered with stearic acid that provide a reflective effect. STANLUX® Paste 340N is specially recommended for application in formulations based on resins that are incomp...展开 STANLUX® Paste 340N is a leafing type aluminum paste made of coarse lamellar particles covered with stearic acid that provide a reflective effect. STANLUX® Paste 340N is specially recommended for application in formulations based on resins that are incompatible with aliphatic solvents and is commonly used for maintenance, protective, marine, and roof coatings. It has an average particle size of 21 microns and a minimum water coverage of 9,000 cm2/g. 收起 |
