| Dynasylan® 1124 | Evonik Operations GmbH, BL Silanes | Dynasylan® 1124 is a secondary aminofunctional methoxy-silane. The product acts as an adhesion promoter between inorganic materials (for example glass, metals and fillers) and organic polymers (thermosets, thermoplastics and elastomers). It can also be us...展开 Dynasylan® 1124 is a secondary aminofunctional methoxy-silane. The product acts as an adhesion promoter between inorganic materials (for example glass, metals and fillers) and organic polymers (thermosets, thermoplastics and elastomers). It can also be used for the chemical modification of polymers and isocyanates. 收起 | |
| Dynasylan® 4148 | Evonik Operations GmbH, BL Silanes | Dynasylan® 4148 is a ready-to-use silane, soluble in water and most organic solvents. Dynasylan® 4148 is a rheological additive which reduces the viscosity of highly-filled polymer systems, like aluminum trihydroxide-filled polyesters or SMC-pastes. Contr...展开 Dynasylan® 4148 is a ready-to-use silane, soluble in water and most organic solvents. Dynasylan® 4148 is a rheological additive which reduces the viscosity of highly-filled polymer systems, like aluminum trihydroxide-filled polyesters or SMC-pastes. Contrary to most other organofunctional silanes, Dynasylan® 4148 features chemical polarity but has a non-reactive polar group. Furthermore, Dynasylan® 4148 can be used as anti-settling agent for fillers and pigments in paints as well as corrosion inhibitors in glycol based cooling agents. 收起 | |
| Dynasylan® 9896 | Evonik Operations GmbH, BL Silanes | Dynasylan® 9896 is an oligomeric short-chain alkylfunctional silane. It is soluble in common organic solvents. | |
| Dynasylan® AR | Evonik Operations GmbH, BL Silanes | Dynasylan® AR is a pre-hydrolyzed, ready-for-use silicic acid ester – hybrid binder with additional colloidal SiO2 particles. Dynasylan® AR contains ethanol as solvent and sulfuric acid as catalyst. Dynasylan® AR is especially suited for use in ceramic ca...展开 Dynasylan® AR is a pre-hydrolyzed, ready-for-use silicic acid ester – hybrid binder with additional colloidal SiO2 particles. Dynasylan® AR contains ethanol as solvent and sulfuric acid as catalyst. Dynasylan® AR is especially suited for use in ceramic casting molds and as a binder for 2-pack zinc dust anti-corrosion paints (e.g. shop-primers). In zinc rich paints with a zinc content above 95% Dynasylan® AR binds the zinc and allows the formation of hard coatings with an effective galvanic protection. 收起 | |
| Dynasylan® F 8263 | Evonik Operations GmbH, BL Silanes | Dynasylan® F 8263 acts as an oleophobic agent to modify carboxy- and hydroxyfunctional substrates (e.g. glass, ceramic). | |
| Dynasylan® HMDS | Evonik Operations GmbH, BL Silanes | Dynasylan® HMDS is a hydrophobizing agent for surface modification. It can also be used to modify polymers. | |
| Dynasylan® HYDROSIL 1153 | Evonik Operations GmbH, BL Silanes | Dynasylan® HYDROSIL 1153 is a water-borne amino-functional silane concentrate which acts as an adhesion promoter between inorganic materials (for example glass, metals and fillers) and organic polymers (thermosets, thermoplastics and elastomers). Dynasyla...展开 Dynasylan® HYDROSIL 1153 is a water-borne amino-functional silane concentrate which acts as an adhesion promoter between inorganic materials (for example glass, metals and fillers) and organic polymers (thermosets, thermoplastics and elastomers). Dynasylan® HYDROSIL 1153 contains about 85% active silane content in water. 收起 | |
| Dynasylan® HYDROSIL 2775 | Evonik Operations GmbH, BL Silanes | Dynasylan® HYDROSIL 2775 is a water-borne amino-functional silane. It is comonly used as an adhesion promotor between inorganic substrates and organic polymers. | |
| Dynasylan® HYDROSIL 2909 | Evonik Operations GmbH, BL Silanes | Dynasylan® HYDROSIL 2909 is a water-borne amino-functional silane and alkyl-functional silane. It is comonly used as a wash primer to treat metals before coatings with another coating system. Corrosion protection can often be achieved. | |
| Dynasylan® MEMO | Evonik Operations GmbH, BL Silanes | 一种甲基丙酸烯官能硅烷，可用作粘胶促进剂、表面改性剂、高分子合成共聚单体，并可作为交联剂。 | |
| Dynasylan® MKS | Evonik Operations GmbH, BL Silanes | Dynasylan® MKS is a silicic acid ester based binder, excellent for the formulation of one-pack zinc silicate coating systems used for heavy duty corrosion protection. Zinc dust paints formulated in this manner have an excellent shelf life in the absence o...展开 Dynasylan® MKS is a silicic acid ester based binder, excellent for the formulation of one-pack zinc silicate coating systems used for heavy duty corrosion protection. Zinc dust paints formulated in this manner have an excellent shelf life in the absence of moisture. Dynasylan® MKS is a binder with superior anti-settling properties. Paints formulated with Dynasylan® MKS can easily be stirred-up even after longer storage times. After processing, the coating will cure in the presence of atmospheric moisture. Overcoating with conventional topcoat systems is facile. Zinc dust paints based on Dynasylan® MKS provide effective protection of steel against corrosion in aggressive industrial and coastal environments at elevated temperatures (up to 420 °C) in the presence of chemicals. 收起 | |
| Dynasylan® OCTMO | Evonik Operations GmbH, BL Silanes | Dynasylan® OCTMO is commonly used as a hydrophobic surface modifier for fillers and pigments. | |
| Dynasylan® SILBOND® 40 | Evonik Operations GmbH, BL Silanes | Dynasylan® Silbond® 40 is a polyethylsilicate with 40 % SiO2 content. Its most important industrial use is as a binder for zinc silicate paints for heavy duty corrosion protection. Furthermore it is used as an inorganic reactive solvent for high temperatu...展开 Dynasylan® Silbond® 40 is a polyethylsilicate with 40 % SiO2 content. Its most important industrial use is as a binder for zinc silicate paints for heavy duty corrosion protection. Furthermore it is used as an inorganic reactive solvent for high temperature applications. 收起 | |
| Dynasylan® SILBOND® 40-HF | Evonik Operations GmbH, BL Silanes | Dynasylan® Silbond® 40-HF, is a polyethylsilicate with 40 % SiO2 content. Its most important industrial use is as a binder for zinc silicate paints for heavy duty corrosion protection. Furthermore it is used as an inorganic reactive solvent for high tempe...展开 Dynasylan® Silbond® 40-HF, is a polyethylsilicate with 40 % SiO2 content. Its most important industrial use is as a binder for zinc silicate paints for heavy duty corrosion protection. Furthermore it is used as an inorganic reactive solvent for high temperature applications. 收起 | |
| Dynasylan® SILBOND® 50 | Evonik Operations GmbH, BL Silanes | Dynasylan® Silbond® 50, is a polyethylsilicate with > 45 % SiO2 content. Its most important industrial use is as a binder for zinc silicate paints for heavy duty corrosion protection. Furthermore it is used as an inorganic reactive solvent for high temper...展开 Dynasylan® Silbond® 50, is a polyethylsilicate with > 45 % SiO2 content. Its most important industrial use is as a binder for zinc silicate paints for heavy duty corrosion protection. Furthermore it is used as an inorganic reactive solvent for high temperature applications. 收起 | |
| Dynasylan® SILBOND® Condensed | Evonik Operations GmbH, BL Silanes | Dynasylan® Silbond® Condensed, the ethyl ester of orthosilicic acid, is frequently also referred to under the name of TEOS (tetraethoxysilane). The product is a colourless, low viscosity liquid with SiO2 content of 28.5%. It is comonly used as a binder fo...展开 Dynasylan® Silbond® Condensed, the ethyl ester of orthosilicic acid, is frequently also referred to under the name of TEOS (tetraethoxysilane). The product is a colourless, low viscosity liquid with SiO2 content of 28.5%. It is comonly used as a binder for sol-gel systems or as a reactive inorganic solvent in high temperature coatings. 收起 | |
| Dynasylan® SILBOND® H-6c | Evonik Operations GmbH, BL Silanes | Dynasylan® SILBOND® H-6C is a clear, low-viscosity pre-hydrolyzed ethyl polysilicate binder that has been designed for use in two part zinc-rich primers for corrosion protection. The silica content ranges from 17.5% to 19.0% (as SiO2). It can also be use...展开 Dynasylan® SILBOND® H-6C is a clear, low-viscosity pre-hydrolyzed ethyl polysilicate binder that has been designed for use in two part zinc-rich primers for corrosion protection. The silica content ranges from 17.5% to 19.0% (as SiO2). It can also be used for investment casting applications. 收起 | |
| Dynasylan® SILBOND® HT-28A | Evonik Operations GmbH, BL Silanes | Dynasylan® SILBOND® HT-28A is a milky-white, low-viscosity pre-hydrolyzed ethyl polysilicate hybrid binder with content ranging from 32.5 to 33.5% silica (as SiO2). The silica content is resultant of a mixture of silica derived from TEOS and other compone...展开 Dynasylan® SILBOND® HT-28A is a milky-white, low-viscosity pre-hydrolyzed ethyl polysilicate hybrid binder with content ranging from 32.5 to 33.5% silica (as SiO2). The silica content is resultant of a mixture of silica derived from TEOS and other components. This material is formulated for use in two component inorganic zinc-rich primers for corrosion protection. Advantages include improved toughness and excellent performance in high-temperature applications. The improved toughness is a direct result of the higher silica content as compared to a ethyl polysilicate binder. 收起 | |
| Dynasylan® SILBOND® HT-33 | Evonik Operations GmbH, BL Silanes | Dynasylan® SILBOND® HT-33 is a milky-white, low-viscosity pre-hydrolyzed ethyl polysilicate hybrid binder that contains a mixture of silica derived from TEOS and other components. The silica content ranges from 32.7% to 34.0% (as SiO2). This material is f...展开 Dynasylan® SILBOND® HT-33 is a milky-white, low-viscosity pre-hydrolyzed ethyl polysilicate hybrid binder that contains a mixture of silica derived from TEOS and other components. The silica content ranges from 32.7% to 34.0% (as SiO2). This material is formulated for use in two component inorganic zinc-rich primers for corrosion protection. Advantages include improved toughness and excellent performance in high-temperature applications. The improved toughness is a direct result of the higher SiO2 content. 收起 | |
| Dynasylan® SILBOND® PURE | Evonik Operations GmbH, BL Silanes | Dynasylan® Silbond® Pure, the ethyl ester of orthosilicic acid, is frequently also referred to under the name of TEOS (tetraethoxysilane). The product is a colourless, low viscosity liquid with SiO2 content of 28.5%. It is comonly used as a binder for sol...展开 Dynasylan® Silbond® Pure, the ethyl ester of orthosilicic acid, is frequently also referred to under the name of TEOS (tetraethoxysilane). The product is a colourless, low viscosity liquid with SiO2 content of 28.5%. It is comonly used as a binder for sol-gel systems or as a reactive inorganic solvent in high temperature coatings. 收起 | |
| Dynasylan® SIVO 110 | Evonik Operations GmbH, BL Silanes | Dynasylan® SIVO 110 is a multifunctional, basically VOC-free, water-borne sol-gel hybrid binder cured at elevated temperatures. It is composed of organofunctional silanes and functionalized SiO2 particles. | |
| Dynasylan® SIVO 121 | Evonik Operations GmbH, BL Silanes | Dynasylan® SIVO 121 is a multifunctional, nearly VOC-free, water-borne silane system. It can act most prominently as a hydrophobizing or olephobizing agent for plain wood surfaces or weathered, originally painted treated wood surfaces. | |
| Dynasylan® SIVO 140 | Evonik Operations GmbH, BL Silanes | Dynasylan® SIVO 140 is an acidic silane based, fully hydrolysed and almost VOC-free hybrid inorganic binder. Comonly Dynasylan® SIVO 140 is used as a binder for water-borne zinc silicate systems for heavy duty corrosion protection paints. Formulations bas...展开 Dynasylan® SIVO 140 is an acidic silane based, fully hydrolysed and almost VOC-free hybrid inorganic binder. Comonly Dynasylan® SIVO 140 is used as a binder for water-borne zinc silicate systems for heavy duty corrosion protection paints. Formulations based on Dynasylan® SIVO 140 cure at room temperature. 收起 | |
| Dynasylan® SIVO 160 | Evonik Operations GmbH, BL Silanes | Dynasylan® SIVO 160 is a water-borne storage stable silane based sol-gel system for the formulation of inorganic surface treatment primers and wash-primers. formulations based on this product cure at a temperature of 20 to 80 °C which represents a major b...展开 Dynasylan® SIVO 160 is a water-borne storage stable silane based sol-gel system for the formulation of inorganic surface treatment primers and wash-primers. formulations based on this product cure at a temperature of 20 to 80 °C which represents a major breakthrough for water-borne sol-gel systems. 收起 | |
| Dynasylan® SIVO 214 | Evonik Operations GmbH, BL Silanes | Dynasylan® SIVO 214 is an aminofunctional silane composition which acts as an adhesion promoter between inorganic materials (for example glass, metals and fillers) and organic polymers (thermosets, thermoplastics and elastomers). | |
| Dynasylan® VTEO | Evonik Operations GmbH, BL Silanes | 双功能有机硅烷，即可以和无机材料，也可以和有机聚合物结合，用作交联剂、增粘剂和/或表面改性剂。 | |
| Dynasylan® VTMO | Evonik Operations GmbH, BL Silanes | 双功能有机硅烷，即可以和无机材料，也可以和有机聚合物结合，用作交联剂, 增粘剂和/或表面改性剂。 | |
| Epoxy Resin E-10 | Anhui Shanfu New Material Technology Co., Ltd. | Epoxy Resin E-10 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a light yellow solid granular powder that has good mechanical and anti-corrosive properties. It can be used in paints and powder coatings. | |
| Epoxy Resin E-12 | Anhui Shanfu New Material Technology Co., Ltd. | Epoxy Resin E-12 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a light yellow, solid granular powder that has good electrostatic spraying performance, chemical resistance, and anti-corrosive properties. It can be used in epoxy polye...展开 Epoxy Resin E-12 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a light yellow, solid granular powder that has good electrostatic spraying performance, chemical resistance, and anti-corrosive properties. It can be used in epoxy polyester powder coatings, or mixed with an amine curing agent for use in anti-corrosion and insulation coatings. 收起 | |
| Epoxy Resin E-14 | Anhui Shanfu New Material Technology Co., Ltd. | Epoxy Resin E-14 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a light yellow, solid granular powder that has good electrostatic spraying performance, chemical resistance, and anti-corrosive properties. It can be used in top-grade e...展开 Epoxy Resin E-14 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a light yellow, solid granular powder that has good electrostatic spraying performance, chemical resistance, and anti-corrosive properties. It can be used in top-grade epoxy polyester powder coatings, electrophoretic paints, and anti-corrosion coatings. 收起 | |
| Epoxy Resin E-20 | Anhui Shanfu New Material Technology Co., Ltd. | Epoxy Resin E-20 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a light yellow, solid granular powder that has good bending performance, chemical resistance, solvent resistance, and strong adhesion properties. It can be used in anti-...展开 Epoxy Resin E-20 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a light yellow, solid granular powder that has good bending performance, chemical resistance, solvent resistance, and strong adhesion properties. It can be used in anti-corrosion coatings, zinc powder primers, floor coatings, decorative coatings and varnishes. 收起 | |
| Epoxy Resin SF801 | Anhui Shanfu New Material Technology Co., Ltd. | Epoxy Resin SF801 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a transparent granular powder that is curable at room temperature or higher temperatures. It can be used in anti-corrosion coatings, electrophoretic paint, floor coatin...展开 Epoxy Resin SF801 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a transparent granular powder that is curable at room temperature or higher temperatures. It can be used in anti-corrosion coatings, electrophoretic paint, floor coatings, decorative coatings, and powder coatings. It has an epoxy equivalent of 450-520 g/eq and a softening point of 65-75°C. 收起 | |
| Epoxy Resin SF801A | Anhui Shanfu New Material Technology Co., Ltd. | Epoxy Resin SF801A is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a transparent granular powder that is curable at room temperature or higher temperatures. It can be used in anti-corrosion coatings, electrophoretic paint, floor coati...展开 Epoxy Resin SF801A is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a transparent granular powder that is curable at room temperature or higher temperatures. It can be used in anti-corrosion coatings, electrophoretic paint, floor coatings, decorative coatings, and powder coatings. It has an epoxy equivalent of 530-570 g/eq and a softening point of 65-75°C. 收起 | |
| Epoxy Resin SF808 | Anhui Shanfu New Material Technology Co., Ltd. | Epoxy Resin SF808 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a transparent, solid granular powder that has good electrostatic spraying performance and plate leveling capacity. It can be used in top-grade epoxy polyester powder co...展开 Epoxy Resin SF808 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a transparent, solid granular powder that has good electrostatic spraying performance and plate leveling capacity. It can be used in top-grade epoxy polyester powder coatings, electrophoretic paints, and anti-corrosion coatings. 收起 | |
| Epoxy Resin SF818 | Anhui Shanfu New Material Technology Co., Ltd. | Epoxy Resin SF818 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a transparent, solid granular powder that has good mechanical performance and electrostatic spraying performance. It can be used in electrophoretic paints, top-grade ep...展开 Epoxy Resin SF818 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a transparent, solid granular powder that has good mechanical performance and electrostatic spraying performance. It can be used in electrophoretic paints, top-grade epoxy poleyster powder coatings, and anti-corrosion coatings. 收起 | |
| Epoxy Resin SF828 | Anhui Shanfu New Material Technology Co., Ltd. | Epoxy Resin SF828 is a MMW solid Bisphenol-A type epoxy resin. This product appears as a transparent, solid granular powder that has good electrostatic spraying performance, chemical resistance, and high impact strength. It can be used in electrophoretic ...展开 Epoxy Resin SF828 is a MMW solid Bisphenol-A type epoxy resin. This product appears as a transparent, solid granular powder that has good electrostatic spraying performance, chemical resistance, and high impact strength. It can be used in electrophoretic paints, top-grade epoxy polyester powder coatings, and anti-corrosion coatings. 收起 | |
| Epoxy Resin SF838 | Anhui Shanfu New Material Technology Co., Ltd. | Epoxy Resin SF838 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a transparent, solid granular powder that has good chemical resistance, electrostatic spraying performance, and anti-corrosive properties. It can be used in electrophor...展开 Epoxy Resin SF838 is a MMW-solid Bisphenol-A type epoxy resin. This product appears as a transparent, solid granular powder that has good chemical resistance, electrostatic spraying performance, and anti-corrosive properties. It can be used in electrophoretic paints and anti-corrosion coatings. 收起 | |
| HIGREE™ C5 Petroleum Resin | Qingdao Higree Chemical Co., Ltd. | HIGREE™ C5 Petroleum Resin is a light color hydrocarbon resin that has a low molecular weight. This product is manufactured from aliphatic petroleum monomers. It is compatible with base polymers in adhesives and sealants and enhances tack and adhesion. HI...展开 HIGREE™ C5 Petroleum Resin is a light color hydrocarbon resin that has a low molecular weight. This product is manufactured from aliphatic petroleum monomers. It is compatible with base polymers in adhesives and sealants and enhances tack and adhesion. HIGREE™ C5 Petroleum Resin is primarily used as an additive in PSA, hot melt adhesives, sealants, and thermoplastic road marking paints. 收起 | |
| HIGREE™ C9 Petroleum Resin | Qingdao Higree Chemical Co., Ltd. | HIGREE™ C9 Petroleum Resin is a hydrocarbon resin that is primarily used as an additive in solvent based adhesives, hot melt adhesives, alkyd based paints, and printing inks. | |
| HIGREE™ CL100 | Qingdao Higree Chemical Co., Ltd. | HIGREE™ CL100 is a light color hydrocarbon resin with a low molecular weight. It has a specific gravity of 0.94-0.99 g/cm3 and an ash content of 0.05%. This product is manufactured from aliphatic petroleum-derived monomers, and it is primarily used as an ...展开 HIGREE™ CL100 is a light color hydrocarbon resin with a low molecular weight. It has a specific gravity of 0.94-0.99 g/cm3 and an ash content of 0.05%. This product is manufactured from aliphatic petroleum-derived monomers, and it is primarily used as an additive in road marking paint, hot melt adhesive, and PSA. 收起 | |
| HIGREE™ CL1102 | Qingdao Higree Chemical Co., Ltd. | HIGREE™ CL1102 is a pale yellow hydrocarbon resin obtained from polymerizing unsaturated aliphatic monomers from the process of cracking of naphtha. It has a specific gravity of 0.94-0.99 g/cm3 and an ash content of 0.05%. This product is specially design...展开 HIGREE™ CL1102 is a pale yellow hydrocarbon resin obtained from polymerizing unsaturated aliphatic monomers from the process of cracking of naphtha. It has a specific gravity of 0.94-0.99 g/cm3 and an ash content of 0.05%. This product is specially designed as a binder for thermoplastic road marking formulations. 收起 | |
| HIGREE™ GD120 | Qingdao Higree Chemical Co., Ltd. | HIGREE™ GD120 is a hydrocarbon resin with a low molecular weight and excellent resistance to acid, alkalies, and moisture. It has a specific gravity of 1.09-1.13 g/cm3 and an ash content of 0.05%. This product is manufactured from aromatic petroleum-deriv...展开 HIGREE™ GD120 is a hydrocarbon resin with a low molecular weight and excellent resistance to acid, alkalies, and moisture. It has a specific gravity of 1.09-1.13 g/cm3 and an ash content of 0.05%. This product is manufactured from aromatic petroleum-derived monomers, and it is primarily used as an additive in hot melt adhesives, solvent based adhesives, and industrial paints. 收起 | |
| HIGREE™ GD130 | Qingdao Higree Chemical Co., Ltd. | HIGREE™ GD130 is a hydrocarbon resin with a low molecular weight and excellent resistance to acid, alkalies, and moisture. It has a specific gravity of 1.09-1.13 g/cm3 and an ash content of 0.05%. This product is manufactured from aromatic petroleum-deriv...展开 HIGREE™ GD130 is a hydrocarbon resin with a low molecular weight and excellent resistance to acid, alkalies, and moisture. It has a specific gravity of 1.09-1.13 g/cm3 and an ash content of 0.05%. This product is manufactured from aromatic petroleum-derived monomers, and it is primarily used as an additive in hot melt adhesives, solvent based adhesives, and industrial paints. 收起 | |
| HIGREE™ GL100 | Qingdao Higree Chemical Co., Ltd. | HIGREE™ GL100 is a light color thermoplastic hydrocarbon resin with low odor. It has a specific gravity of 1.09-1.13 g/cm3 and an ash content of 0.05%. This product is manufactured from purified aromatic petroleum-derived monomers, and it is primarily use...展开 HIGREE™ GL100 is a light color thermoplastic hydrocarbon resin with low odor. It has a specific gravity of 1.09-1.13 g/cm3 and an ash content of 0.05%. This product is manufactured from purified aromatic petroleum-derived monomers, and it is primarily used as an additive in hot melt adhesives and industrial paints. 收起 | |
| HIGREE™ GL120 | Qingdao Higree Chemical Co., Ltd. | HIGREE™ GL120 is a light color thermoplastic hydrocarbon resin with low odor. It has a specific gravity of 1.09-1.13 g/cm3 and an ash content of 0.05%. This product is manufactured from purified aromatic petroleum-derived monomers, and it is primarily use...展开 HIGREE™ GL120 is a light color thermoplastic hydrocarbon resin with low odor. It has a specific gravity of 1.09-1.13 g/cm3 and an ash content of 0.05%. This product is manufactured from purified aromatic petroleum-derived monomers, and it is primarily used as an additive in hot melt adhesives and industrial paints. 收起 | |
| HIGREE™ GP100 | Qingdao Higree Chemical Co., Ltd. | HIGREE™ GP100 is a light color thermoplastic hydrocarbon resin with low molecular weight. It has a specific gravity of 1.09-1.13 g/cm3 and an ash content of 0.05%. This product is manufactured from aromatic petroleum-derived monomers, and it is primarily ...展开 HIGREE™ GP100 is a light color thermoplastic hydrocarbon resin with low molecular weight. It has a specific gravity of 1.09-1.13 g/cm3 and an ash content of 0.05%. This product is manufactured from aromatic petroleum-derived monomers, and it is primarily used as an additive in hot melt adhesives and paints. 收起 | |
| HIGREE™ GP120 | Qingdao Higree Chemical Co., Ltd. | HIGREE™ GP120 is a light color thermoplastic hydrocarbon resin with low odor. It has a specific gravity of 1.09-1.13 g/cm3 and an ash content of 0.05%. This product is manufactured from purified aromatic petroleum-derived monomers, and it is primarily use...展开 HIGREE™ GP120 is a light color thermoplastic hydrocarbon resin with low odor. It has a specific gravity of 1.09-1.13 g/cm3 and an ash content of 0.05%. This product is manufactured from purified aromatic petroleum-derived monomers, and it is primarily used as an additive in hot melt adhesives and industrial paints. 收起 | |
| HIGREE™ GP130 | Qingdao Higree Chemical Co., Ltd. | HIGREE™ GP130 is a light color thermoplastic hydrocarbon resin with low odor. It has a specific gravity of 1.09-1.13 g/cm3 and an ash content of 0.05%. This product is manufactured from purified aromatic petroleum-derived monomers, and it is primarily use...展开 HIGREE™ GP130 is a light color thermoplastic hydrocarbon resin with low odor. It has a specific gravity of 1.09-1.13 g/cm3 and an ash content of 0.05%. This product is manufactured from purified aromatic petroleum-derived monomers, and it is primarily used as an additive in hot melt adhesives and industrial paints. 收起 | |
| HIGREE™ GP140 | Qingdao Higree Chemical Co., Ltd. | HIGREE™ GP140 is a light color thermoplastic hydrocarbon resin with low odor. It has a specific gravity of 1.09-1.13 g/cm3 and an ash content of 0.05%. This product is manufactured from purified aromatic petroleum-derived monomers, and it is primarily use...展开 HIGREE™ GP140 is a light color thermoplastic hydrocarbon resin with low odor. It has a specific gravity of 1.09-1.13 g/cm3 and an ash content of 0.05%. This product is manufactured from purified aromatic petroleum-derived monomers, and it is primarily used as an additive in hot melt adhesives and industrial paints. 收起 | |
| HIGREE™ GP150 | Qingdao Higree Chemical Co., Ltd. | HIGREE™ GP150 is a light color thermoplastic hydrocarbon resin with low odor. It has a specific gravity of 1.09-1.13 g/cm3 and an ash content of 0.05%. This product is manufactured from purified aromatic petroleum-derived monomers, and it is primarily use...展开 HIGREE™ GP150 is a light color thermoplastic hydrocarbon resin with low odor. It has a specific gravity of 1.09-1.13 g/cm3 and an ash content of 0.05%. This product is manufactured from purified aromatic petroleum-derived monomers, and it is primarily used as an additive in hot melt adhesives, inks, and industrial paints. 收起 | |
| HIGREE™ GR100 | Qingdao Higree Chemical Co., Ltd. | HIGREE™ GR100 is a pale yellow thermoplastic hydrocarbon resin with low molecular weight. It has a specific gravity of 1.09-1.13 g/cm3 and an ash content of 0.05%. This product has good resistance to alkalies and acid, and it is primarily used as an addit...展开 HIGREE™ GR100 is a pale yellow thermoplastic hydrocarbon resin with low molecular weight. It has a specific gravity of 1.09-1.13 g/cm3 and an ash content of 0.05%. This product has good resistance to alkalies and acid, and it is primarily used as an additive in industrial paints. 收起 | |
| HIGREE™ GR120 | Qingdao Higree Chemical Co., Ltd. | HIGREE™ GR120 is a pale yellow thermoplastic hydrocarbon resin with low molecular weight. It has a specific gravity of 1.09-1.13 g/cm3 and an ash content of 0.05%. This product has good resistance to alkalies and acid, and it is primarily used as an addit...展开 HIGREE™ GR120 is a pale yellow thermoplastic hydrocarbon resin with low molecular weight. It has a specific gravity of 1.09-1.13 g/cm3 and an ash content of 0.05%. This product has good resistance to alkalies and acid, and it is primarily used as an additive in industrial paints and solvent adhesives. 收起 | |
| HIGREE™ GV100 | Qingdao Higree Chemical Co., Ltd. | HIGREE™ GV100 is a light color thermoplastic hydrocarbon resin with low molecular weight. It has a specific gravity of 1.09-1.13 g/cm3 and an ash content of 0.05%. This product has excellent resistance to alkalies, moisture, and acid, and it is primarily ...展开 HIGREE™ GV100 is a light color thermoplastic hydrocarbon resin with low molecular weight. It has a specific gravity of 1.09-1.13 g/cm3 and an ash content of 0.05%. This product has excellent resistance to alkalies, moisture, and acid, and it is primarily used as an additive in industrial paints and hot melt adhesives. 收起 | |
| HIGREE™ GV120 | Qingdao Higree Chemical Co., Ltd. | HIGREE™ GV120 is a light color thermoplastic hydrocarbon resin with low molecular weight. It has a specific gravity of 1.09-1.13 g/cm3 and an ash content of 0.05%. This product has excellent resistance to alkalies, moisture, and acid, and it is primarily ...展开 HIGREE™ GV120 is a light color thermoplastic hydrocarbon resin with low molecular weight. It has a specific gravity of 1.09-1.13 g/cm3 and an ash content of 0.05%. This product has excellent resistance to alkalies, moisture, and acid, and it is primarily used as an additive in industrial paints, inks, and hot melt adhesives. 收起 | |
| HIGREE™ GV130 | Qingdao Higree Chemical Co., Ltd. | HIGREE™ GV130 is a light color thermoplastic hydrocarbon resin with low molecular weight. It has a specific gravity of 1.09-1.13 g/cm3 and an ash content of 0.05%. This product has excellent resistance to alkalies, moisture, and acid, and it is primarily ...展开 HIGREE™ GV130 is a light color thermoplastic hydrocarbon resin with low molecular weight. It has a specific gravity of 1.09-1.13 g/cm3 and an ash content of 0.05%. This product has excellent resistance to alkalies, moisture, and acid, and it is primarily used as an additive in industrial paints, inks, and adhesives. 收起 | |
| HIGREE™ GV140 | Qingdao Higree Chemical Co., Ltd. | HIGREE™ GV140 is a light color thermoplastic hydrocarbon resin with low molecular weight. It has a specific gravity of 1.09-1.13 g/cm3 and an ash content of 0.05%. This product has excellent resistance to alkalies, moisture, and acid, and it is primarily ...展开 HIGREE™ GV140 is a light color thermoplastic hydrocarbon resin with low molecular weight. It has a specific gravity of 1.09-1.13 g/cm3 and an ash content of 0.05%. This product has excellent resistance to alkalies, moisture, and acid, and it is primarily used as an additive in industrial paints, printing inks, and hot melt adhesives. 收起 | |
| HIGREE™ GV150 | Qingdao Higree Chemical Co., Ltd. | HIGREE™ GV150 is a light color thermoplastic hydrocarbon resin with low molecular weight. It has a specific gravity of 1.09-1.13 g/cm3 and an ash content of 0.05%. This product has excellent resistance to alkalies, moisture, and acid, and it is primarily ...展开 HIGREE™ GV150 is a light color thermoplastic hydrocarbon resin with low molecular weight. It has a specific gravity of 1.09-1.13 g/cm3 and an ash content of 0.05%. This product has excellent resistance to alkalies, moisture, and acid, and it is primarily used as an additive in industrial paints, printing inks, and hot melt adhesives. 收起 | |
| K-FLEX® 148 | King Industries, Inc. | K-FLEX® 148 is a highly reactive, aliphatic polyester polyol which is suggested for melamine or isocyanate crosslinked sealants, adhesives, inks, elastomers, and coatings for better flexibility, higher gloss, and improved flow out. It has a lower viscosit...展开 K-FLEX® 148 is a highly reactive, aliphatic polyester polyol which is suggested for melamine or isocyanate crosslinked sealants, adhesives, inks, elastomers, and coatings for better flexibility, higher gloss, and improved flow out. It has a lower viscosity to form higher solid content with good hardness and expanded flexibility. It appears as a clear, light straw liquid, offers good flow and leveling along with being 100% active. K-FLEX® 148 is soluble in ketones, alcohols, esters, Aromatic 100, Aromatic 150, and xylene. It is partially soluble in mineral spirits and is insoluble in water. It is normally applied in office furniture coatings, automotive primers, coil coatings, overprint varnishes, and general industrials. 收起 | |
| K-FLEX® 171-90 | King Industries, Inc. | K-FLEX® 171-90 is a highly reactive, aliphatic polyester polyol that is suggested for aminoplast or isocyanate crosslinked coatings, sealants, inks, elastomers, and adhesives. Although it is slower reacting in isocyanate crosslinked systems, it offers lon...展开 K-FLEX® 171-90 is a highly reactive, aliphatic polyester polyol that is suggested for aminoplast or isocyanate crosslinked coatings, sealants, inks, elastomers, and adhesives. Although it is slower reacting in isocyanate crosslinked systems, it offers long pot life, enhanced adhesion and flexibility. Because of its lower hydroxyl number, K-FLEX® 171-90 requires less crosslinker. K-FLEX® 171-90 can also be used as a modifier of aminoplast crosslinked coatings, inks and adhesives to enhance flexibility and adhesion. It appears as a clear, light straw liquid and offers high resistivity and low temperature cure. This product is soluble in esters, ketones, alcohols, aromatic 100 and aromatic 150, and xylene. It is partially soluble in mineral spirits and is insoluble in water. It can be used in office furniture coatings, 2K urethane coatings, appliance coatings, elastomeric coatings, coil coatings, and epoxy flexibilizer. 收起 | |
| K-FLEX® 188 | King Industries, Inc. | K-FLEX® 188 is a highly reactive, aliphatic polyester polyol which is suggested for aminoplast or isocyanate crosslinked coatings, adhesives, sealants, elastomers, and inks. Its uniform, narrow molecular weight distribution and unique chemical structure p...展开 K-FLEX® 188 is a highly reactive, aliphatic polyester polyol which is suggested for aminoplast or isocyanate crosslinked coatings, adhesives, sealants, elastomers, and inks. Its uniform, narrow molecular weight distribution and unique chemical structure produce exceptional and consistent performance and broad compatibility. K-FLEX® 188's primary hydroxyl groups also produce reactivity with epoxies in cationic thermal cure systems. This product is 100% active and offers, good flexibility, adhesion to plastics, and high resistivity. It appears as a clear, light straw liquid and is soluble in the aerospace, automotive refinish, and marine maintenance industries along with plastic substrates, overprint varnishes, glass laminates, and optical coatings. 收起 | |
| K-FLEX® 7301 | King Industries, Inc. | K-FLEX® 7301 is a reactive diluent with low viscosity and good compatibility with a variety of resins. It can be crosslinked with amino resins, polyisocyanates, polyamides, polyamines, unsaturated polymers, and is based on acetoacetate functionality. It i...展开 K-FLEX® 7301 is a reactive diluent with low viscosity and good compatibility with a variety of resins. It can be crosslinked with amino resins, polyisocyanates, polyamides, polyamines, unsaturated polymers, and is based on acetoacetate functionality. It is effective for both high solids and water-based applications for enhancing adhesion and corrosion resistance. This product appears as a clear amber liquid, terminates solvent popping/pinholes, and reduces induction time in epoxy/polyamide coatings. It is soluble in alcohols, ketones, esters, and aliphatic and aromatic hydrocarbons. It can be used in 2 component epoxy/ polyamide coatings, isocyanate crosslined coatings, and UV cure and oxidizing polymerization. 收起 | |
| K-FLEX® A307 | King Industries, Inc. | K-FLEX® A307 is a low viscosity, 100% solids linear, saturated, aliphatic polyester diol with primary hydroxyl groups. This product was created as a flexibility modifier for acrylic/isocyanate and acrylic/melamine systems. The low hydroxyl number minimize...展开 K-FLEX® A307 is a low viscosity, 100% solids linear, saturated, aliphatic polyester diol with primary hydroxyl groups. This product was created as a flexibility modifier for acrylic/isocyanate and acrylic/melamine systems. The low hydroxyl number minimizes the crosslinker demand. It offers improved flexibility, light color, abrasion resistance, good balance of surface dry and pot life in 2K PU, and no acid functionality. It appears as a clear viscous liquid and is soluble in esters, alcohols, xylene, ketones, aromatic 100, and aromatic 150. It is partially soluble in mineral spirits and is insoluble in water. It can be applied in automotive refinish, automotive OEM, industrial maintenance, aerospace, and plastic coatings. 收起 | |
| K-FLEX® A308 | King Industries, Inc. | K-FLEX® A308 is a 100% active linear, saturated, low viscosity, aliphatic polyester diol with essential hydroxyl groups. This product was created as a flexibility modifier for acrylic/isocyanate and acrylic/melamine systems. The low viscosity mixed togeth...展开 K-FLEX® A308 is a 100% active linear, saturated, low viscosity, aliphatic polyester diol with essential hydroxyl groups. This product was created as a flexibility modifier for acrylic/isocyanate and acrylic/melamine systems. The low viscosity mixed together with higher hydroxyl number gives good adhesion and hardness with lower VOC levels. K-FLEX® A308 appears as a offers enhanced flexibility, light color, a balance of surface dry/pot life in 2K PU, no acid functionality, and abrasion resistance. It is soluble in esters, alcohols, Aromatic 100, Aromatic 150, ketones, and xylene. It is partially soluble in mineral spirits and is insoluble in water. It can be applied in automotive refinish, automotive OEM, plastic coatings, industrial maintenance, and aerospace. 收起 | |
| K-FLEX® UD-320 | King Industries, Inc. | K-FLEX® UD-320 is an aliphatic, high solids, low molecular weight urethane diol oligomer. It is soluble in polar organic solvents except aliphatic and aromatic hydrocarbons. To gain aromatic solubility it has to be combined with a hydrogen bonding solvent...展开 K-FLEX® UD-320 is an aliphatic, high solids, low molecular weight urethane diol oligomer. It is soluble in polar organic solvents except aliphatic and aromatic hydrocarbons. To gain aromatic solubility it has to be combined with a hydrogen bonding solvent. This product has broad compatibility with acrylic, polyester, and alkyd resins. K-FLEX® UD-320 enhances the hardness of melamine crosslinked systems. When used to modify a 2-component polyurethane, it will enhance hardness and flexibility. K-FLEX® UD-320 responds best to a zirconium chelate catalyst when used in isocyanate crosslinked systems. It also offers benefits like low VOC, chemical resistance, exterior durability, QUV resistance, and hydrolytic stability. This product can be used for machine/equipment coatings, automotive coatings, appliance coatings, wood and paper coatings, and aerospace coatings. 收起 | |
| K-FLEX® UD-320-100 | King Industries, Inc. | K-FLEX® UD-320-100 is a low molecular weight, aliphatic urethane diol oligomer, supplied at 100% solids. It is suggested to be used as a chemical intermediate for prepolymer synthesis and allows the incorporation of aliphatic urethane groups without the u...展开 K-FLEX® UD-320-100 is a low molecular weight, aliphatic urethane diol oligomer, supplied at 100% solids. It is suggested to be used as a chemical intermediate for prepolymer synthesis and allows the incorporation of aliphatic urethane groups without the use of isocyanates. It appears as a viscous clear liquid and offers a low VOC, enhanced hardness, exterior durability, hydrolytic stability, QUV resistance, and is solvent and isocyanate free. This product is soluble in almost all organic solvents excluding aliphatic and aromatic hydrocarbons. The only was to get aromatic solubility is to combine it with a hydrogen bonding solvent. K-FLEX® UD-320-100 can be applied in industries like paper, automotive, wood, leather, and screen printing ink. 收起 | |
| K-FLEX® UD-350W | King Industries, Inc. | K-FLEX® UD-350W is a water-based solution of an aliphatic, low molecular weight urethane diol oligomer. It is suggested to be used as a modifier for amino crosslinked water soluble, emulsified acrylic, alkyd, urethane, and polyester resins. K-FLEX® UD-350...展开 K-FLEX® UD-350W is a water-based solution of an aliphatic, low molecular weight urethane diol oligomer. It is suggested to be used as a modifier for amino crosslinked water soluble, emulsified acrylic, alkyd, urethane, and polyester resins. K-FLEX® UD-350W can be used as a reactive cosolvent replacement to enhance crosslink density, solids, film/resistance properties, and flow/leveling. It appears as a straw colored liquid and offers low VOC, water solubility, hardness, chemical resistance, hydrolytic stability, QUV resistance, and exterior durability. This is a product that is not soluble in aromatic and aliphatic hydrocarbons. It can used in making, coil coatings, wood coatings, can coatings, dip coatings, appliance coatings, automotive coatings, and overprint varnishes. 收起 | |
| K-FLEX® XM-3307 | King Industries, Inc. | K-FLEX® XM-3307 is a carboxyl and hydroxyl functional polyester-urethane polyol. It is made to be a dispersing resin for pigments that are organic or inorganic.. It has to be neutralized with an amine to give good dispersing qualities. This product appear...展开 K-FLEX® XM-3307 is a carboxyl and hydroxyl functional polyester-urethane polyol. It is made to be a dispersing resin for pigments that are organic or inorganic.. It has to be neutralized with an amine to give good dispersing qualities. This product appears as a viscous liquid and offers fast dispersion time, high pigment loading, and high pigment transparency. It is soluble in ketones, alcohols, esters, aromatic hydrocarbons, and is not soluble in aliphatic hydrocarbons. It can be soluble in water if it is neutralized with an organic amine. K-FLEX® XM-3307 can also be applied in water-based coatings, solvent-based coatings, and can be used as an intercoat adhesion promoter. 收起 | |
| K-FLEX® XM-332 | King Industries, Inc. | K-FLEX® XM-332 is a low viscosity polyester polyol modifier resin that provides enhanced flexibility in solvent-borne, high solids, and solventless systems. It is recommended for use in air dry/force dry 2-component polyurethanes and blocked isocyanate sy...展开 K-FLEX® XM-332 is a low viscosity polyester polyol modifier resin that provides enhanced flexibility in solvent-borne, high solids, and solventless systems. It is recommended for use in air dry/force dry 2-component polyurethanes and blocked isocyanate systems. It appears as a light colored liquid, is 100% active, and offers good flexibility and hydrolytic stability. This product is soluble in aromatics and polar organic solvents like ketones, alcohols, glycols, esters, and glycol ethers. Two things that it is not soluble in are aliphatics and water. K-FLEX® XM-332 can be applied in structural adhesives, thermoplastic urethanes, plastic coatings, cast elastomer prepolymers, and automotive topcoats and OEM coatings. 收起 | |
| K-FLEX® XM-337 | King Industries, Inc. | K-FLEX® XM-337 is an aliphatic saturated polyester diol modifier resin created to implement increased toughness and chemical resistance for solvent borne and high solids systems. It is recommended for use in 1 and 2 component polyurethanes, and blocked is...展开 K-FLEX® XM-337 is an aliphatic saturated polyester diol modifier resin created to implement increased toughness and chemical resistance for solvent borne and high solids systems. It is recommended for use in 1 and 2 component polyurethanes, and blocked isocyanate systems. This product offers low color, UV durability, high hardness, high impact resistance, abrasion resistance and overall increased toughness. It appears as a clear liquid and is soluble in a lot of polar organic solvents such as glycols, alcohols, esters, ketones, aromatics, glycol ethers, and is not soluble in water and aliphatics. 收起 | |
| K-FLEX® XM-359 | King Industries, Inc. | K-FLEX® XM-359 is created to provide long pot life in 2K polyurethanes and to avoid yellowing resulting from interaction with benzotriazole (BZT) UV absorbers in clearcoat systems. K-FLEX® XM-359 is a saturated, aliphatic resin modifier. It provides a goo...展开 K-FLEX® XM-359 is created to provide long pot life in 2K polyurethanes and to avoid yellowing resulting from interaction with benzotriazole (BZT) UV absorbers in clearcoat systems. K-FLEX® XM-359 is a saturated, aliphatic resin modifier. It provides a good balance of flexibility with hardness, good exterior durability plus great solubility in many different solvents including exempt solvents. It appears as a clear, light straw liquid and provides optical clarity and low color along with good compatibility. This product is soluble in esters, ketones, alcohols, aromatic 100, aromatic 150, xylene, t-butyl acetate, and Oxsol 100. It is partially soluble in mineral spirits, and insoluble in water. It is applied in plastic coatings, optically clear coatings, elastomers and laminates. 收起 | |
| K-FLEX® XM-360 | King Industries, Inc. | K-FLEX® XM-360 is made to produce long pot life in 2K polyurethanes and to prevent yellowing resulting from interaction with benzotriazole (BZT) UV absorbers. K-FLEX® XM-360 is a saturated, aliphatic resin modifier. It gives a good balance of flexibility ...展开 K-FLEX® XM-360 is made to produce long pot life in 2K polyurethanes and to prevent yellowing resulting from interaction with benzotriazole (BZT) UV absorbers. K-FLEX® XM-360 is a saturated, aliphatic resin modifier. It gives a good balance of flexibility with hardness, excellent exterior durability plus excellent solubility in many different solvents. This product offers good compatibility and solubility, optical clarity and low color, and it is 100% active. It appears as a light straw liquid and is soluble in ketones, aromatics, alcohols, glycols, glycol ethers, esters, and is insoluble in water. It can be applied in the aerospace industry, automotive refinishes, plastic coatings, marine maintenance, and optically clear coatings, elastomers, and laminates. 收起 | |
| K-FLEX® XM-366 | King Industries, Inc. | K-FLEX® XM-366 is a low viscosity, 100% active, saturated, aliphatic polyester diol with primary hydroxyl groups. This product was made for use as a resin modifier of acrylic/isocyanate and acrylic/melamine systems to expand flexibility and decline VOC. I...展开 K-FLEX® XM-366 is a low viscosity, 100% active, saturated, aliphatic polyester diol with primary hydroxyl groups. This product was made for use as a resin modifier of acrylic/isocyanate and acrylic/melamine systems to expand flexibility and decline VOC. It appears as a clear liquid that is light in color and offers good compatibility and solubility. This product is soluble in glycols, glycol ethers, alcohols, esters, aromatics, ketones, and is insoluble in aliphatic hydrocarbons and water. It can be applied in plastic coatings, aerospace, automotive OEM & refinishes, and VOC compliant systems. 收起 | |
| K-FLEX® XM-B301 | King Industries, Inc. | K-FLEX® XM-B301 is a low viscosity, acetoacetate functional reactive diluent that is compatible with variety of resins. It is mainly suggested to be used in epoxy/polyamide primers, but can also be used in systems crosslinked with amino resins or polyisoc...展开 K-FLEX® XM-B301 is a low viscosity, acetoacetate functional reactive diluent that is compatible with variety of resins. It is mainly suggested to be used in epoxy/polyamide primers, but can also be used in systems crosslinked with amino resins or polyisocyanates. This product appears as a clear amber liquid and offers reduced induction time, adhesion, corrosion resistance, viscosity reduction, and elimates solvent popping and pinholes. It is soluble in esters, alcohols, aromatics, and ketones. It is insoluble in aliphatic hydrocarbons and water. K-FLEX® XM-B301 can be applied in epoxy-polyamide primers for industries like aerospace, automotive, marine, truck/bus/rail, and industrial maintenance. 收起 | |
| KLX 7997 | Nokxeller Quimica Ltda | KLX 7997 is a versatile polyether based aromatic isocyanate anionic dispersion for high tack formulations. It has a very soft and flexible film that can be used as a high initial and final bond strength and heat resistance. Typical applications are for mo...展开 KLX 7997 is a versatile polyether based aromatic isocyanate anionic dispersion for high tack formulations. It has a very soft and flexible film that can be used as a high initial and final bond strength and heat resistance. Typical applications are for modifying pressure sensitive textile & construction adhesives, neoprene, EVA and other plastic & leather primer applications. Once crosslinked shows outstanding water resistance. 收起 | |
| NKX 144 | Nokxeller Quimica Ltda | NKX 144 is a small particle size high gloss PU polyesther aliphatic topcoat. It forms a transparent film of medium hardness suitable as a final varnish or topcoat where high gloss, abrasion resistance and clarity are required. When crosslinked, presents e...展开 NKX 144 is a small particle size high gloss PU polyesther aliphatic topcoat. It forms a transparent film of medium hardness suitable as a final varnish or topcoat where high gloss, abrasion resistance and clarity are required. When crosslinked, presents excellent weatherability. It is ideal for use as a topcoat for leather finish and PVC, indoor paints formulation, etc. 收起 | |
| NKX 176 | Nokxeller Quimica Ltda | NKX 176 is a soft and elastic PUD with outstanding film-forming properties. NKX 176 is a NON IONIC VOC free soft non tacky and elastic PUD with outstanding film-forming properties. It can be used as a universal coating resin for textile due to its varied ...展开 NKX 176 is a soft and elastic PUD with outstanding film-forming properties. NKX 176 is a NON IONIC VOC free soft non tacky and elastic PUD with outstanding film-forming properties. It can be used as a universal coating resin for textile due to its varied possibility of uses. NKX 176 has a flexible and soft but non-tacky handle. It has varied applications especially in textile finishes where body handle, durability are required. It is ideal for use as a print binder and as an universal coating resin in textile applications, garment leather finish, and coatings for digital printing in fabrics. 收起 | |
| NKX 183 | Nokxeller Quimica Ltda | NKX 180 based resin, with higher concentration.Multipurpose resin of extreme adhesion, outstanding toughness and abrasion resistance suitable for coatings for the following substrates: plastic, synthetic fabric, metal, shoe finish, etc. Due to its high cr...展开 NKX 180 based resin, with higher concentration.Multipurpose resin of extreme adhesion, outstanding toughness and abrasion resistance suitable for coatings for the following substrates: plastic, synthetic fabric, metal, shoe finish, etc. Due to its high crystalline segment concentration the polymer presents itself tough, yet flexible and resistant. 收起 | |
| NKX 201 NMP-Free | Nokxeller Quimica Ltda | NKX 201 NMP-Free shows excellent chemical, weathering and abrasion resistance due to higher resistance of this kind of polyol. NKX 201 presents wide use possibilities considering its high gloss and transparency properties as in synthetic substrates, as hi...展开 NKX 201 NMP-Free shows excellent chemical, weathering and abrasion resistance due to higher resistance of this kind of polyol. NKX 201 presents wide use possibilities considering its high gloss and transparency properties as in synthetic substrates, as high gloss topcoats in leather finish, wood flooring or print screen putties, metallic applications. 收起 | |
| NKX 240 | Nokxeller Quimica Ltda | NKX 240 is a multipurpose resin of exceptional properties was developed to serve a wide range of applications for flexible and rigid substrates. NKX 240 shows up a clear film with good gloss retention and presents high adhesion and heat resistance. | |
| NKX 245 | Nokxeller Quimica Ltda | NKX-245 is a modified polyester type suitable for glossy aqueous coatings as wood flooring. NKX 245 has a very hard film providing high abrasion resistance, and adhesion and can be easily formulated along with other components such as acrylic resins, pigm...展开 NKX-245 is a modified polyester type suitable for glossy aqueous coatings as wood flooring. NKX 245 has a very hard film providing high abrasion resistance, and adhesion and can be easily formulated along with other components such as acrylic resins, pigment dispersions, fillers, thickeners, etc. 收起 | |
| NKX 250 | Nokxeller Quimica Ltda | NKX-250 is a very hard PUD polyester type adequate for clear or pigmented waterbased topcoat for rigid substrates specially furniture, metal or hard synthetic substrates. Its hard, transparent and glossy film provides good abrasion resistance, adhesion an...展开 NKX-250 is a very hard PUD polyester type adequate for clear or pigmented waterbased topcoat for rigid substrates specially furniture, metal or hard synthetic substrates. Its hard, transparent and glossy film provides good abrasion resistance, adhesion and gloss. 收起 | |
| NKX 274 | Nokxeller Quimica Ltda | NKX 274 is a high solid small particle size resin with excellent chemical resistance. It is adequate for varied market segments wherever is necessary to replace a solventborne for a waterborne paint. Typical uses in metal, soles, PVC, other synthetic subs...展开 NKX 274 is a high solid small particle size resin with excellent chemical resistance. It is adequate for varied market segments wherever is necessary to replace a solventborne for a waterborne paint. Typical uses in metal, soles, PVC, other synthetic substrate paint compositions wherever high gloss, good adhesions and chemical resistance are necessary. 收起 | |
| NKX 279 | Nokxeller Quimica Ltda | NKX 279 is a fine particle size resin and developed to formulate water topcoats of high adhesion and very good chemical resistance. Typical end use applications include top coatings for rigid and flexible substrates including wood, paper, metallic surface...展开 NKX 279 is a fine particle size resin and developed to formulate water topcoats of high adhesion and very good chemical resistance. Typical end use applications include top coatings for rigid and flexible substrates including wood, paper, metallic surface , plastics and especially PVC and other synthetic laminates.NKX 279 is high performance water based coating and can replace traditional solvent based coatings in wide applications possibilities. 收起 |
