#14 Sta-Brite | PCI Group, Inc. | #14 Sta-Brite is a clear, octadecanoic acid product, designed to enhance leafing aluminum in enamel and related systems. Improves the uniformity and brightness, leafing and leaf retention of all systems commonly used as leafing aluminum coatings. | |
#249 HI-TECH | PCI Group, Inc. | #249 HI-TECH is a clear blend of Alkyl-Aryl modified silicones. It is designed for high solids coating systems to improve mar resistance without the standard recoat problems. Designed for use in virtually all high solids solvent-borne systems. | |
901-GDA-2 | PCI Group, Inc. | 901-GDA-2 is a clear, silicone-free polyvinyl isobutyl ether solution used to improve color development, leveling and gloss while controlling surface flooding and floating. It can be used with acrylic resin, alkyd (long, medium and short oils), polyamide,...展开 901-GDA-2 is a clear, silicone-free polyvinyl isobutyl ether solution used to improve color development, leveling and gloss while controlling surface flooding and floating. It can be used with acrylic resin, alkyd (long, medium and short oils), polyamide, polyester and urethane for pigmented and non-pigmented systems. 收起 | |
941 LBA | PCI Group, Inc. | 941 LBA is a clear, linear polydimethylsiloxane polymer designed for use in systems containing non-leafing aluminums. It provides higher brightness, controlled uniformity and burnishing and helps prevent “black” float. | |
Almatis BayGranite®17 ATH (Aluminum Trihydroxide) | Almatis, Inc. | Almatis BayGranite®17 ATH (Aluminum Trihydroxide) is an inorganic hydrated alumina, primarily used as a flame retardant additive for most polymer systems. BayGranite® 17 is more accurately designated chemically as aluminum trihydroxide, Al(OH)3, and is pr...展开 Almatis BayGranite®17 ATH (Aluminum Trihydroxide) is an inorganic hydrated alumina, primarily used as a flame retardant additive for most polymer systems. BayGranite® 17 is more accurately designated chemically as aluminum trihydroxide, Al(OH)3, and is produced through processing of alumina-bearing feedstocks. It is a dry powder, when heated above approximately 220°C it decomposes into approximately 35% water and 65% alumina by weight. 收起 | |
Almatis FlameGard® ATH (Aluminum Trihydroxide) | Almatis, Inc. | Almatis FlameGard® ATH (Aluminum Trihydroxide) is an inorganic hydrated alumina designed for use in polymer systems as a flame retardant and smoke suppressive additive. FlameGard is more accurately designated chemically as aluminum trihydroxide, Al(OH)3, ...展开 Almatis FlameGard® ATH (Aluminum Trihydroxide) is an inorganic hydrated alumina designed for use in polymer systems as a flame retardant and smoke suppressive additive. FlameGard is more accurately designated chemically as aluminum trihydroxide, Al(OH)3, and is produced through processing of alumina-bearing feedstocks. Although FlameGard is a dry powder, when heated above approximately 220°C it decomposes into approximately 35% water and 65% alumina by weight. 收起 | |
AMA | PCI Group, Inc. | AMA is a clear-colored dimethyl silicone which improves mar resistance and reduces surface tension in conventional solvent based coatings. Systems include: acrylic resins, alkyd, epoxy, lacquer, phenolic, polyester and urethane. It is recommended for clea...展开 AMA is a clear-colored dimethyl silicone which improves mar resistance and reduces surface tension in conventional solvent based coatings. Systems include: acrylic resins, alkyd, epoxy, lacquer, phenolic, polyester and urethane. It is recommended for clear topcoats. 收起 | |
AMAFCA | PCI Group, Inc. | AMAFCA is a clear-colored Alkyl-Aryl silicone designed control foaming during application. It also promotes improved mar resistance for virtually all solvent based coating systems. It can control foaming in roller coater, flow coater, curtain coater, dip,...展开 AMAFCA is a clear-colored Alkyl-Aryl silicone designed control foaming during application. It also promotes improved mar resistance for virtually all solvent based coating systems. It can control foaming in roller coater, flow coater, curtain coater, dip, conventional and airless spray systems. 收起 | |
AMMA | PCI Group, Inc. | AMMA is a non-ionic, clear-colored polyalkyeneoxide-modified polydimethylsiloxane developed for high solids / high solids metallic coatings. It helps prevent mottling, enhances color uniformity and increases the sharpness of gloss. Systems include: acryl...展开 AMMA is a non-ionic, clear-colored polyalkyeneoxide-modified polydimethylsiloxane developed for high solids / high solids metallic coatings. It helps prevent mottling, enhances color uniformity and increases the sharpness of gloss. Systems include: acrylic resins, alkyds, epoxy, melamine, phenolic, polyamide, polyester, urea and urethane. 收起 | |
APACA | PCI Group, Inc. | APACA is a clear, non-ionic modified dimethyl polysiloxane co-polymer solution for use in water-borne and water-reducible products. It will assist in the reduction of surface defects by altering the surface tension of the coating. It will also increase gl...展开 APACA is a clear, non-ionic modified dimethyl polysiloxane co-polymer solution for use in water-borne and water-reducible products. It will assist in the reduction of surface defects by altering the surface tension of the coating. It will also increase gloss, slip and mar resistance. 收起 | |
ASAFA | PCI Group, Inc. | ASAFA is a pale amber colored blend of a dimethyl silicone and refined naphthenic base oil. Designed for use in conventional systems such as acrylic resins, alkyds, polyamide, polyester and urethane. It acts to control silking, flooding and pigment float ...展开 ASAFA is a pale amber colored blend of a dimethyl silicone and refined naphthenic base oil. Designed for use in conventional systems such as acrylic resins, alkyds, polyamide, polyester and urethane. It acts to control silking, flooding and pigment float while sharpening gloss, improving pigment wetting and enhancing leveling. 收起 | |
ASAFA #3 | PCI Group, Inc. | ASAFA #3 is a clear-colored linear polydimethylsiloxane polymer used where floating or silking is a problem. It effectively balances out solvents during the air dry process. It can be used in coating systems such as alkyds, modified alkyds, acrylics, epox...展开 ASAFA #3 is a clear-colored linear polydimethylsiloxane polymer used where floating or silking is a problem. It effectively balances out solvents during the air dry process. It can be used in coating systems such as alkyds, modified alkyds, acrylics, epoxies, vinyls and most oleo-resinous non-aqueous systems. 收起 | |
ASAFAMA | PCI Group, Inc. | ASAFAMA is a clear-colored, highly-modified silicone fluid designed for use in systems where a dimethyl silicone may be a problem. It is useful for enhancing the defoaming properties of applied coatings, and sharpens gloss, improves color acceptance and i...展开 ASAFAMA is a clear-colored, highly-modified silicone fluid designed for use in systems where a dimethyl silicone may be a problem. It is useful for enhancing the defoaming properties of applied coatings, and sharpens gloss, improves color acceptance and improves mar resistance without recoating problems. 收起 | |
ASASWA | PCI Group, Inc. | ASASWA is a light amber, highly modified reactive polyamide resin solution. It can be used in acid-catalyzed, alkyds (short, medium and long oils), epoxy, epoxy ester, polyurethane and high solids polyester systems. It increases resistance to sag, allows ...展开 ASASWA is a light amber, highly modified reactive polyamide resin solution. It can be used in acid-catalyzed, alkyds (short, medium and long oils), epoxy, epoxy ester, polyurethane and high solids polyester systems. It increases resistance to sag, allows for enhanced pigment wetting and color development and eliminates hard settling. 收起 | |
ASLA | PCI Group, Inc. | ASLA is a clear, silicone-free, polyvinyl ethyl ether solution used to improve color development, leveling and gloss while controllling surface flooding and floating. It can be used in acrylic resins, alkyds (long, med., short oils), polyamide, polyester ...展开 ASLA is a clear, silicone-free, polyvinyl ethyl ether solution used to improve color development, leveling and gloss while controllling surface flooding and floating. It can be used in acrylic resins, alkyds (long, med., short oils), polyamide, polyester and urethane pigmented and non-pigmented systems. 收起 | |
C-485-FBRA | PCI Group, Inc. | C-485-FBRA is a clear alkyl-aryl air release agent which acts as a foam and bubble release agent. It is compatible with conventional systems: acrylic resins, alkyds, lacquers, melamine, phenolic, polyamide, polyester and urethane. It also acts to improve ...展开 C-485-FBRA is a clear alkyl-aryl air release agent which acts as a foam and bubble release agent. It is compatible with conventional systems: acrylic resins, alkyds, lacquers, melamine, phenolic, polyamide, polyester and urethane. It also acts to improve leveling and slip. 收起 | |
CHEM-REZ A-1050 | PCI Group, Inc. | CHEM-REZ A-1050 is a clear poly vinyl ethyl isoburyl ether solution recommended for use in most conventional and high solid coating systems. It increases adhesion and flexibility, improves flow and leveling, acts as a plasticizer for coatings and inks and...展开 CHEM-REZ A-1050 is a clear poly vinyl ethyl isoburyl ether solution recommended for use in most conventional and high solid coating systems. It increases adhesion and flexibility, improves flow and leveling, acts as a plasticizer for coatings and inks and is useful in dip and flow coater systems. 收起 | |
CLAWB | PCI Group, Inc. | CLAWB is a clear, colorless liquid comprised of and epoxy functional silane which serves as a crosslinker and adhesion promoter. It is intended for formulations containing acrylic latexes and polyurethane dispersions with carboxy or amino functionality. W...展开 CLAWB is a clear, colorless liquid comprised of and epoxy functional silane which serves as a crosslinker and adhesion promoter. It is intended for formulations containing acrylic latexes and polyurethane dispersions with carboxy or amino functionality. Waterborne coating formulations using CLAWB show improved solvent, impact and mar resistance, superior wet and dry adhesion, gloss retention upon aging and improved stain resistance in wood coatings. 收起 | |
CSV-3000 | PCI Group, Inc. | CSV-3000 is a thixotropic, milky white oil emulsion intended for blending with high Tg acrylic and polyurethane emulsions. The end product will provide semi-transparent concrete stains. It is intended to penetrate and seal the surface, minimizing water tr...展开 CSV-3000 is a thixotropic, milky white oil emulsion intended for blending with high Tg acrylic and polyurethane emulsions. The end product will provide semi-transparent concrete stains. It is intended to penetrate and seal the surface, minimizing water transmission. The basic film properties are determined by the added emulsion. 收起 | |
Desmocolor Black PU, VPA 503/1 | mk chemicals | Desmocolor Black PU, VPA 503/1 is a black colored pasty to liquid pigment. It has a pigment content of 15%, an organic solvents value of 35%, and a flash point of 24 degrees Celsius. This product is used in the preparation of polyurethane coatings that ar...展开 Desmocolor Black PU, VPA 503/1 is a black colored pasty to liquid pigment. It has a pigment content of 15%, an organic solvents value of 35%, and a flash point of 24 degrees Celsius. This product is used in the preparation of polyurethane coatings that are used on roofs and floors. 收起 | |
Desmocolor Concrete Grey, VPA 275/14 | mk chemicals | Desmocolor Concrete Grey, VPA 275/14 is a grey colored pasty to liquid pigment. It has a pigment content of 66%, an organic solvents value of 20.6%, and a flash point of 24 degrees Celsius. This product is used in the preparation of polyurethane coatings ...展开 Desmocolor Concrete Grey, VPA 275/14 is a grey colored pasty to liquid pigment. It has a pigment content of 66%, an organic solvents value of 20.6%, and a flash point of 24 degrees Celsius. This product is used in the preparation of polyurethane coatings that are used on roofs and floors. 收起 | |
Desmocolor Cream White, VPA 275/1 | mk chemicals | Desmocolor Cream White, VPA 275/1 is a white colored pasty to liquid pigment. It has a pigment content of 66%, an organic solvents value of 19%, and a flash point of 24 degrees Celsius. This product is used in the preparation of polyurethane coatings that...展开 Desmocolor Cream White, VPA 275/1 is a white colored pasty to liquid pigment. It has a pigment content of 66%, an organic solvents value of 19%, and a flash point of 24 degrees Celsius. This product is used in the preparation of polyurethane coatings that are used on roofs and floors. 收起 | |
Desmocolor Grey White, VPA 275/2 | mk chemicals | Desmocolor Grey White, VPA 275/2 is a pasty to liquid pigment. It has a pigment content of 66%, an organic solvents value of 19%, and a flash point of 24 degrees Celsius. This product is used in the preparation of polyurethane coatings that are used on ro...展开 Desmocolor Grey White, VPA 275/2 is a pasty to liquid pigment. It has a pigment content of 66%, an organic solvents value of 19%, and a flash point of 24 degrees Celsius. This product is used in the preparation of polyurethane coatings that are used on roofs and floors. 收起 | |
Desmocolor Nut Brown, VPA 275/10 | mk chemicals | Desmocolor Nut Brown, VPA 275/10 is a brown colored pasty to liquid pigment. It has a pigment content of 58%, an organic solvents value of 26%, and a flash point of 24 degrees Celsius. This product is used in the preparation of polyurethane coatings that ...展开 Desmocolor Nut Brown, VPA 275/10 is a brown colored pasty to liquid pigment. It has a pigment content of 58%, an organic solvents value of 26%, and a flash point of 24 degrees Celsius. This product is used in the preparation of polyurethane coatings that are used on roofs and floors. 收起 | |
Desmocolor Olive Green, VPA 275/15 | mk chemicals | Desmocolor Olive Green, VPA 275/15 is a green colored pasty to liquid pigment. It has a pigment content of 69%, an organic solvents value of 17%, and a flash point of 24 degrees Celsius. This product is used in the preparation of polyurethane coatings tha...展开 Desmocolor Olive Green, VPA 275/15 is a green colored pasty to liquid pigment. It has a pigment content of 69%, an organic solvents value of 17%, and a flash point of 24 degrees Celsius. This product is used in the preparation of polyurethane coatings that are used on roofs and floors. 收起 | |
Desmocolor Pebble Grey, VPA 275/4 | mk chemicals | Desmocolor Pebble Grey, VPA 275/4 is a grey colored pasty to liquid pigment. It has a pigment content of 67.3%, an organic solvents value of 18.3%, and a flash point of 24 degrees Celsius. This product is used in the preparation of polyurethane coatings t...展开 Desmocolor Pebble Grey, VPA 275/4 is a grey colored pasty to liquid pigment. It has a pigment content of 67.3%, an organic solvents value of 18.3%, and a flash point of 24 degrees Celsius. This product is used in the preparation of polyurethane coatings that are used on roofs and floors. 收起 | |
Desmocolor White PU, VPA 434 | mk chemicals | Desmocolor White PU, VPA 434 is a white colored pasty to liquid pigment. It has a pigment content of 70%, an organic solvents value of 14%, and a flash point of 24 degrees Celsius. This product is used in the preparation of polyurethane coatings that are ...展开 Desmocolor White PU, VPA 434 is a white colored pasty to liquid pigment. It has a pigment content of 70%, an organic solvents value of 14%, and a flash point of 24 degrees Celsius. This product is used in the preparation of polyurethane coatings that are used on roofs and floors. 收起 | |
ExBar™ 200 | Excalibar Minerals LLC | ExBar™ 200 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 15.0u and an oil absorption of 9. | |
ExBar™ 325 | Excalibar Minerals LLC | ExBar™ 325 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 10.0u and an oil absorption of 10. | |
ExBar™ 400 | Excalibar Minerals LLC | ExBar™ 400 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 8.0u and an oil absorption of 12. | |
ExBar™ W 1 | Excalibar Minerals LLC | ExBar™ W 1 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 1 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 1u and an oil absorption of 15. 收起 | |
ExBar™ W 2 | Excalibar Minerals LLC | ExBar™ W 2 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 2 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 2u and an oil absorption of 13. 收起 | |
ExBar™ W 3 | Excalibar Minerals LLC | ExBar™ W 3 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 3 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 3u and an oil absorption of 13. 收起 | |
ExBar™ W 325 | Excalibar Minerals LLC | ExBar™ W 325 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are pr...展开 ExBar™ W 325 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. 收起 | |
ExBar™ W 4 | Excalibar Minerals LLC | ExBar™ W 4 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 4 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 4u and an oil absorption of 12. 收起 | |
ExBar™ W 400 | Excalibar Minerals LLC | ExBar™ W 400 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are pr...展开 ExBar™ W 400 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 8u and an oil absorption of 10. 收起 | |
ExCal® 100 | Excalibar Minerals LLC | ExCal® 100 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |
ExCal® 200 | Excalibar Minerals LLC | ExCal® 200 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |
ExCal® 325 | Excalibar Minerals LLC | ExCal® 325 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |
ExCal® 400 | Excalibar Minerals LLC | ExCal® 400 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |
ExCal® CW 100 | Excalibar Minerals LLC | ExCal® CW 100 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 100 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起 | |
ExCal® CW 200 | Excalibar Minerals LLC | ExCal® CW 200 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 200 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起 | |
ExCal® CW 325 | Excalibar Minerals LLC | ExCal® CW 325 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 325 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起 | |
FCABA 2 | PCI Group, Inc. | FCABA 2 is a slightly cloudy blend of silicone and organic acid esters. It can be used in most non-aqueous based coating systems, adhesives and inks. It will prevent bubble and foaming in flow coat, curtain coater, dip, roller coater, conventional and air...展开 FCABA 2 is a slightly cloudy blend of silicone and organic acid esters. It can be used in most non-aqueous based coating systems, adhesives and inks. It will prevent bubble and foaming in flow coat, curtain coater, dip, roller coater, conventional and airless spray applications. It is stable over a wide temperature range. 收起 | |
FSDS | PCI Group, Inc. | FSDS is a clear liquid comprised of a blend of fluorosurfactant diols. It is intended to provide improved flow, leveling and reduced surface waviness and orange peel without associated air entrainment problems. It reduces the need for multiple additives b...展开 FSDS is a clear liquid comprised of a blend of fluorosurfactant diols. It is intended to provide improved flow, leveling and reduced surface waviness and orange peel without associated air entrainment problems. It reduces the need for multiple additives by acting as a de-aerator and flow / leveling agent. It is well suited for clear formulations and readily miscible with alkyds, polyesters, cellulosics, acrylics and high solids coating systems. 收起 | |
HSADA-42 | PCI Group, Inc. | HSADA-42 is a clear fluoroaliphatic polymeric ester used in solvent, high solids and UV curable coating systems. It is non-ionic and works to reduce or eliminate problems associated with surface tension such as craters, fisheyes, picture framing and orang...展开 HSADA-42 is a clear fluoroaliphatic polymeric ester used in solvent, high solids and UV curable coating systems. It is non-ionic and works to reduce or eliminate problems associated with surface tension such as craters, fisheyes, picture framing and orange peel. HSADA-42 is active throughout the curing process and demonstrates significantly less foam development than many other fluorosurfactants. 收起 | |
HSADA-44 | PCI Group, Inc. | HSADA-44 is a clear, fluoroaliphatic polymeric ester used in solvent, high solids and aqueous coating systems. It is non-ionic and works to reduce or eliminate problems associated with surface tension such as craters, fish-eyes, picture framing and orange...展开 HSADA-44 is a clear, fluoroaliphatic polymeric ester used in solvent, high solids and aqueous coating systems. It is non-ionic and works to reduce or eliminate problems associated with surface tension such as craters, fish-eyes, picture framing and orange peel. HSADA-44 is active throughout the curing process and demonstrates significantly less foam development than other fluorosurfactants. 收起 | |
HSWADA | PCI Group, Inc. | HSWADA is an amber-colored blend of a pale tall oil fatty acid with moderate rosin acid content and an anionic wetting and dispersing agent. It improves substrate wetting, enhances viscosity stability and prevents hard settling while increasing the pigmen...展开 HSWADA is an amber-colored blend of a pale tall oil fatty acid with moderate rosin acid content and an anionic wetting and dispersing agent. It improves substrate wetting, enhances viscosity stability and prevents hard settling while increasing the pigment grinding speed. It is designed for systems such as alkyds, drying oils, amino resins, vinyls, acrylics, oil modified urethanes, polyesters, and epoxy esters. 收起 | |
HSWADA-60 | PCI Group, Inc. | HSWADA-60 is an amber colored blend of a functional capped amine with tall oil fatty acid. The resulting product is a wetting agent with high efficiency toward alkaline based pigments. It can be used with alkyd, drying oil, amino resin, vinyl, acrylic, oi...展开 HSWADA-60 is an amber colored blend of a functional capped amine with tall oil fatty acid. The resulting product is a wetting agent with high efficiency toward alkaline based pigments. It can be used with alkyd, drying oil, amino resin, vinyl, acrylic, oil modified urethane, polyester, epoxy, and epoxy ester coating systems. 收起 | |
HSWADA-B | PCI Group, Inc. | HSWADA-B is an amber colored blend of amine chemistry with dimerized acids. The resulting product is a wetting agent with high efficiency toward acidic based pigments. It has an affinity for alkaline pigments. It can be used with alkyd, drying oil, amino ...展开 HSWADA-B is an amber colored blend of amine chemistry with dimerized acids. The resulting product is a wetting agent with high efficiency toward acidic based pigments. It has an affinity for alkaline pigments. It can be used with alkyd, drying oil, amino resin, vinyl, acrylic, oil modified urethane, polyester, epoxy, epoxy ester and polyester coating systems. 收起 | |
LH-75 | PCI Group, Inc. | LH-75 is a slightly yellow amide polymer modifier additive that will improve depth of image (wet-look), enhance gloss, increase hardness and scratch resistance and will improve resin compatibility and flow. It can be used in many types of lacquers includi...展开 LH-75 is a slightly yellow amide polymer modifier additive that will improve depth of image (wet-look), enhance gloss, increase hardness and scratch resistance and will improve resin compatibility and flow. It can be used in many types of lacquers including nitrocellulose, acrylic, polyurethane and acid-catalyzed varnishes. It is also effective in polyester / melamine systems. It is not recommended in systems with a high level of aliphatic hydrocarbons. 收起 | |
MFA 31 | PCI Group, Inc. | MFA 31 is a non-ionic, clear, recoatable polyalkyeneoxide modified polydimethylsiloxane developed for water-borne and water-reducible systems. It can be used to eliminate film defects, such as craters, through refined flow and leveling. It also enhances c...展开 MFA 31 is a non-ionic, clear, recoatable polyalkyeneoxide modified polydimethylsiloxane developed for water-borne and water-reducible systems. It can be used to eliminate film defects, such as craters, through refined flow and leveling. It also enhances color uniformity and allows for sharper gloss. 收起 | |
MK Fluo Blue, VPA 596/7 | mk chemicals | MK Fluo Blue, VPA 596/7 is a blue colored liquid to pasty pigment. It has a pigment content of 40%, a water value of 57% ± 1%, and an additives value of 3%. This product is used in water borne, fluorescent coatings. | |
MK Fluo Yellow, VPA 596/3 | mk chemicals | MK Fluo Yellow, VPA 596/3 is a yellow colored liquid to pasty pigment. It has a pigment content of 40%, a water value of 57% ± 1%, and an additives value of 3%. This product is used in water borne, fluorescent coatings. | |
MK-Ecomarker Black, VPA 672/9 | mk chemicals | MK-Ecomarker Black, VPA 672/9 is a black colored fluorescent pigment. It has a liquid to pasty viscosity, a flash point of 12 degrees Celsius, and a specific weight of 0.87 grams per cubic centimeter. This product is used in solvent borne paints mainly in...展开 MK-Ecomarker Black, VPA 672/9 is a black colored fluorescent pigment. It has a liquid to pasty viscosity, a flash point of 12 degrees Celsius, and a specific weight of 0.87 grams per cubic centimeter. This product is used in solvent borne paints mainly in aerosol applications. 收起 | |
MK-Ecomarker Neon Blue, VPA 672/5 | mk chemicals | MK-Ecomarker Neon Blue, VPA 672/5 is a blue colored fluorescent pigment. It has a liquid to pasty viscosity, a flash point of 12 degrees Celsius, and a specific weight of 0.98 grams per cubic centimeter. This product is used in solvent borne paints mainly...展开 MK-Ecomarker Neon Blue, VPA 672/5 is a blue colored fluorescent pigment. It has a liquid to pasty viscosity, a flash point of 12 degrees Celsius, and a specific weight of 0.98 grams per cubic centimeter. This product is used in solvent borne paints mainly in aerosol applications. 收起 | |
MK-Ecomarker Neon Green, VPA 672/4 | mk chemicals | MK-Ecomarker Neon Green, VPA 672/4 is a green colored fluorescent pigment. It has a liquid to pasty viscosity, a flash point of 12 degrees Celsius, and a specific weight of 0.94 grams per cubic centimeter. This product is used in solvent borne paints main...展开 MK-Ecomarker Neon Green, VPA 672/4 is a green colored fluorescent pigment. It has a liquid to pasty viscosity, a flash point of 12 degrees Celsius, and a specific weight of 0.94 grams per cubic centimeter. This product is used in solvent borne paints mainly in aerosol applications. 收起 | |
MK-Ecomarker Neon Orange, VPA 672/3 | mk chemicals | MK-Ecomarker Neon Orange, VPA 672/3 is an orange colored fluorescent pigment. It has a liquid to pasty viscosity, a flash point of 12 degrees Celsius, and a specific weight of 0.94 grams per cubic centimeter. This product is used in solvent borne paints m...展开 MK-Ecomarker Neon Orange, VPA 672/3 is an orange colored fluorescent pigment. It has a liquid to pasty viscosity, a flash point of 12 degrees Celsius, and a specific weight of 0.94 grams per cubic centimeter. This product is used in solvent borne paints mainly in aerosol applications. 收起 | |
MK-Ecomarker Neon Pink, VPA 672/1 | mk chemicals | MK-Ecomarker Neon Pink, VPA 672/1 is a pink colored fluorescent pigment. It has a liquid to pasty viscosity, a flash point of 12 degrees Celsius, and a specific weight of 0.94 grams per cubic centimeter. This product is used in solvent borne paints mainly...展开 MK-Ecomarker Neon Pink, VPA 672/1 is a pink colored fluorescent pigment. It has a liquid to pasty viscosity, a flash point of 12 degrees Celsius, and a specific weight of 0.94 grams per cubic centimeter. This product is used in solvent borne paints mainly in aerosol applications. 收起 | |
MK-Ecomarker Neon Red, VPA 672 | mk chemicals | MK-Ecomarker Neon Red, VPA 672 is a red colored fluorescent pigment. It has a liquid to pasty viscosity, a flash point of 12 degrees Celsius, and a specific weight of 0.94 grams per cubic centimeter. This product is used in solvent borne paints mainly in ...展开 MK-Ecomarker Neon Red, VPA 672 is a red colored fluorescent pigment. It has a liquid to pasty viscosity, a flash point of 12 degrees Celsius, and a specific weight of 0.94 grams per cubic centimeter. This product is used in solvent borne paints mainly in aerosol applications. 收起 | |
MK-Ecomarker Neon Yellow, VPA 672/2 | mk chemicals | MK-Ecomarker Neon Yellow, VPA 672/2 is a yellow colored fluorescent pigment. It has a liquid to pasty viscosity, a flash point of 12 degrees Celsius, and a specific weight of 0.94 grams per cubic centimeter. This product is used in solvent borne paints ma...展开 MK-Ecomarker Neon Yellow, VPA 672/2 is a yellow colored fluorescent pigment. It has a liquid to pasty viscosity, a flash point of 12 degrees Celsius, and a specific weight of 0.94 grams per cubic centimeter. This product is used in solvent borne paints mainly in aerosol applications. 收起 | |
MK-Ecomarker White, VPA 672/10 | mk chemicals | MK-Ecomarker White, VPA 672/10 is a white colored fluorescent pigment. It has a liquid to pasty viscosity, a flash point of 12 degrees Celsius, and a specific weight of 1.06 grams per cubic centimeter. This product is used in solvent borne paints mainly i...展开 MK-Ecomarker White, VPA 672/10 is a white colored fluorescent pigment. It has a liquid to pasty viscosity, a flash point of 12 degrees Celsius, and a specific weight of 1.06 grams per cubic centimeter. This product is used in solvent borne paints mainly in aerosol applications. 收起 | |
MK-Epoxycolor 102 Sand Yellow | mk chemicals | MK-Epoxycolor 102 Sand Yellow is a yellow colored pasty to liquid pigment. It has a pigment content of 50%, and a flash point of greater than 100 degrees Celsius. This product is used in the preparation of epoxide coatings. | |
MK-Epoxycolor 111 Brown Beige | mk chemicals | MK-Epoxycolor 111 Brown Beige is a pasty to liquid pigment. It has a pigment content of 44%, and a flash point of greater than 100 degrees Celsius. This product is used in the preparation of epoxide coatings. | |
MK-Epoxycolor 120 Olive Yellow | mk chemicals | MK-Epoxycolor 120 Olive Yellow is a pasty to liquid pigment. It has a pigment content of 47%, and a flash point of greater than 100 degrees Celsius. This product is used in the preparation of epoxide coatings. | |
MK-Epoxycolor 313 Tomato Red | mk chemicals | MK-Epoxycolor 313 Tomato Red is a red colored pasty to liquid pigment. It has a pigment content of 40%, and a flash point of greater than 100 degrees Celsius. This product is used in the preparation of epoxide coatings. | |
MK-Epoxycolor 602 Leaf Green | mk chemicals | MK-Epoxycolor 602 Leaf Green is a green colored pasty to liquid pigment. It has a pigment content of 36%, and a flash point of greater than 100 degrees Celsius. This product is used in the preparation of epoxide coatings. | |
MK-Epoxycolor 621 Pale Green | mk chemicals | MK-Epoxycolor 621 Pale Green is a green colored pasty to liquid pigment. It has a pigment content of 50%, and a flash point of greater than 100 degrees Celsius. This product is used in the preparation of epoxide coatings. | |
MK-Epoxycolor 700 Squirrel Grey | mk chemicals | MK-Epoxycolor 700 Squirrel Grey is a grey colored pasty to liquid pigment. It has a pigment content of 50%, and a flash point of greater than 100 degrees Celsius. This product is used in the preparation of epoxide coatings. | |
MK-Epoxycolor 723 Concrete Grey | mk chemicals | MK-Epoxycolor 723 Concrete Grey is a grey colored pasty to liquid pigment. It has a pigment content of 49%, and a flash point of greater than 100 degrees Celsius. This product is used in the preparation of epoxide coatings. | |
MK-Epoxycolor 730 Stone Grey | mk chemicals | MK-Epoxycolor 730 Stone Grey is a grey colored pasty to liquid pigment. It has a pigment content of 50%, and a flash point of greater than 100 degrees Celsius. This product is used in the preparation of epoxide coatings. | |
MK-Epoxycolor 731 Blue Grey | mk chemicals | MK-Epoxycolor 731 Blue Grey is a pasty to liquid pigment. It has a pigment content of 48%, and a flash point of greater than 100 degrees Celsius. This product is used in the preparation of epoxide coatings. | |
MK-Epoxycolor 732 Pebble Grey | mk chemicals | MK-Epoxycolor 732 Pebble Grey is a grey colored pasty to liquid pigment. It has a pigment content of 50%, and a flash point of greater than 100 degrees Celsius. This product is used in the preparation of epoxide coatings. | |
MK-Epoxycolor 733 Cement Grey | mk chemicals | MK-Epoxycolor 733 Cement Grey is a grey colored pasty to liquid pigment. It has a pigment content of 50%, and a flash point of greater than 100 degrees Celsius. This product is used in the preparation of epoxide coatings. | |
MK-Epoxycolor 735 Light Grey | mk chemicals | MK-Epoxycolor 735 Light Grey is a grey colored pasty to liquid pigment. It has a pigment content of 50%, and a flash point of greater than 100 degrees Celsius. This product is used in the preparation of epoxide coatings. | |
MK-Epoxycolor 738 Agate Grey | mk chemicals | MK-Epoxycolor 738 Agate Greyis a grey colored pasty to liquid pigment. It has a pigment content of 50%, and a flash point of greater than 100 degrees Celsius. This product is used in the preparation of epoxide coatings. | |
MK-Epoxycolor Black P. Bk. 11 | mk chemicals | MK-Epoxycolor Black P. Bk. 11 is a black colored pasty to liquid pigment. It has a pigment content of 50%, a flash point of greater than 100 degrees Celsius, and a specific weight of 1.91 grams per cubic centimeter. This product is used in the preparation...展开 MK-Epoxycolor Black P. Bk. 11 is a black colored pasty to liquid pigment. It has a pigment content of 50%, a flash point of greater than 100 degrees Celsius, and a specific weight of 1.91 grams per cubic centimeter. This product is used in the preparation of epoxide coatings. 收起 | |
MK-Epoxycolor Blue P. B. 15:1 | mk chemicals | MK-Epoxycolor Blue P. B. 15:1 is a blue colored pasty to liquid pigment. It has a pigment content of 16%, a flash point of greater than 100 degrees Celsius, and a specific weight of 1.21 grams per cubic centimeter. This product is used in the preparation ...展开 MK-Epoxycolor Blue P. B. 15:1 is a blue colored pasty to liquid pigment. It has a pigment content of 16%, a flash point of greater than 100 degrees Celsius, and a specific weight of 1.21 grams per cubic centimeter. This product is used in the preparation of epoxide coatings. 收起 | |
MK-Epoxycolor Bright Red P. R. 112 | mk chemicals | MK-Epoxycolor Bright Red P. R. 112 is a red colored pasty to liquid pigment. It has a pigment content of 25%, a flash point of greater than 100 degrees Celsius, and a specific weight of 1.19 grams per cubic centimeter. This product is used in the preparat...展开 MK-Epoxycolor Bright Red P. R. 112 is a red colored pasty to liquid pigment. It has a pigment content of 25%, a flash point of greater than 100 degrees Celsius, and a specific weight of 1.19 grams per cubic centimeter. This product is used in the preparation of epoxide coatings. 收起 | |
MK-Epoxycolor Bright Yellow P. Y. 74 | mk chemicals | MK-Epoxycolor Bright Yellow P. Y. 74 is a yellow colored pasty to liquid pigment. It has a pigment of 30%, a flash point of greater than 100 degrees Celsius, and a specific weight of 1.28 grams per cubic centimeter. This product is used in the preparation...展开 MK-Epoxycolor Bright Yellow P. Y. 74 is a yellow colored pasty to liquid pigment. It has a pigment of 30%, a flash point of greater than 100 degrees Celsius, and a specific weight of 1.28 grams per cubic centimeter. This product is used in the preparation of epoxide coatings. 收起 | |
MK-Epoxycolor Green P. G. 17 | mk chemicals | MK-Epoxycolor Green P. G. 17 is a green colored pasty to liquid pigment. It has a pigment content of 50%, a flash point of greater than 100 degrees Celsius, and a specific weight of 1.94 grams per cubic centimeter. This product is used in the preparation ...展开 MK-Epoxycolor Green P. G. 17 is a green colored pasty to liquid pigment. It has a pigment content of 50%, a flash point of greater than 100 degrees Celsius, and a specific weight of 1.94 grams per cubic centimeter. This product is used in the preparation of epoxide coatings. 收起 | |
MK-Epoxycolor Red P. R. 101 | mk chemicals | MK-Epoxycolor Red P. R. 101 is a red colored pasty to liquid pigment. It has a pigment content of 50%, a flash point of greater than 100 degrees Celsius, and a specific weight of 1.92 grams per cubic centimeter. This product is used in the preparation of ...展开 MK-Epoxycolor Red P. R. 101 is a red colored pasty to liquid pigment. It has a pigment content of 50%, a flash point of greater than 100 degrees Celsius, and a specific weight of 1.92 grams per cubic centimeter. This product is used in the preparation of epoxide coatings. 收起 | |
MK-Epoxycolor White P. W. 6 | mk chemicals | MK-Epoxycolor White P. W. 6 is a white colored pasty to liquid pigment. It has a pigment content of 50%, a flash point of greater than 100 degrees Celsius, and a specific weight of 1.87 grams per cubic centimeter. This product is used in the preparation o...展开 MK-Epoxycolor White P. W. 6 is a white colored pasty to liquid pigment. It has a pigment content of 50%, a flash point of greater than 100 degrees Celsius, and a specific weight of 1.87 grams per cubic centimeter. This product is used in the preparation of epoxide coatings. 收起 | |
MK-Epoxycolor Yellow P. Y. 42 | mk chemicals | MK-Epoxycolor Yellow P. Y. 42 is a yellow colored pasty to liquid pigment. It has a pigment content of 40%, a flash point of greater than 100 degrees Celsius, and a specific weight of 1.63 grams per cubic centimeter. This product is used in the preparatio...展开 MK-Epoxycolor Yellow P. Y. 42 is a yellow colored pasty to liquid pigment. It has a pigment content of 40%, a flash point of greater than 100 degrees Celsius, and a specific weight of 1.63 grams per cubic centimeter. This product is used in the preparation of epoxide coatings. 收起 | |
MK-Fluo Green, VPA 596/1 | mk chemicals | MK-Fluo Green, VPA 596/1 is a green colored liquid to pasty pigment. It has a pigment content of 40%, a water value of 57% ± 1%, and an additives value of 3%. This product is used in water borne, fluorescent coatings. | |
MK-Fluo Orange, VPA 596/5 | mk chemicals | MK-Fluo Orange, VPA 596/5 is an orange colored liquid to pasty pigment. It has a pigment content of 40%, a water value of 57% ± 1%, and an additives value of 3%. This product is used in water borne, fluorescent coatings. | |
MK-Fluo Pink, VPA 596/4 | mk chemicals | MK-Fluo Pink, VPA 596/4 is a pink colored liquid to pasty pigment. It has a pigment content of 40%, a water value of 57% ± 1%, and an additives value of 3%. This product is used in water borne, fluorescent coatings. | |
MK-Fluo Red, VPA 596 | mk chemicals | MK-Fluo Red, VPA 596 is a red colored liquid to pasty pigment. It has a pigment content of 40%, a water value of 57% ± 1%, and an additives value of 3%. This product is used in water borne, fluorescent coatings. | |
MK-Hydrocolor Bismuth Vanadate Yellow | mk chemicals | MK-Hydrocolor Bismuth Vanadate Yellow is a yellow colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 65% ± 1%, and a water value of 32% ± 1%. This product is used in the preparation of inorganic water based pigments tha...展开 MK-Hydrocolor Bismuth Vanadate Yellow is a yellow colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 65% ± 1%, and a water value of 32% ± 1%. This product is used in the preparation of inorganic water based pigments that are used in paints and colors. 收起 | |
MK-Hydrocolor Black 7, VPA 26 | mk chemicals | MK-Hydrocolor Black 7, VPA 26 is a carbon black colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 45% ± 1%, and a water value of 60% ± 1%. This product is used in the preparation of organic water based pigments that ar...展开 MK-Hydrocolor Black 7, VPA 26 is a carbon black colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 45% ± 1%, and a water value of 60% ± 1%. This product is used in the preparation of organic water based pigments that are used in paints and colors. 收起 | |
MK-Hydrocolor Black P. Bk. 7, VPA 344/12 | mk chemicals | MK-Hydrocolor Black P. Bk. 7, VPA 344/12 is a black colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 38% ± 1%, and a water value of 42% ± 1%. This product is used in the preparation of water based pigments that are us...展开 MK-Hydrocolor Black P. Bk. 7, VPA 344/12 is a black colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 38% ± 1%, and a water value of 42% ± 1%. This product is used in the preparation of water based pigments that are used in coating binders, and colors. 收起 | |
MK-Hydrocolor Blue 15:1 | mk chemicals | MK-Hydrocolor Blue 15:1 is a blue colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 50% ± 1%, and a water value of 35.5% ± 1%. This product is used in the preparation of organic water based pigments that are used in pa...展开 MK-Hydrocolor Blue 15:1 is a blue colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 50% ± 1%, and a water value of 35.5% ± 1%. This product is used in the preparation of organic water based pigments that are used in paints and colors. 收起 | |
MK-Hydrocolor Blue P. B. 15:1, VPA 344/24/1 | mk chemicals | MK-Hydrocolor Blue P. B. 15:1, VPA 344/24/1 is a blue colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 38% ± 1%, and a water value of 45% ± 1%. This product is used in the preparation of water based pigments that are ...展开 MK-Hydrocolor Blue P. B. 15:1, VPA 344/24/1 is a blue colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 38% ± 1%, and a water value of 45% ± 1%. This product is used in the preparation of water based pigments that are used in coating binders, and colors. 收起 | |
MK-Hydrocolor Chromium Oxide Green | mk chemicals | MK-Hydrocolor Chromium Oxide Green is a green colored pasty to liquid pigment. It has a pH value of 7,5 to 9.0, a pigment content of 60% ± 1%, and a water value of 39% ± 1%. This product is used in the preparation of inorganic water based pigments that ar...展开 MK-Hydrocolor Chromium Oxide Green is a green colored pasty to liquid pigment. It has a pH value of 7,5 to 9.0, a pigment content of 60% ± 1%, and a water value of 39% ± 1%. This product is used in the preparation of inorganic water based pigments that are used in paints and colors. 收起 | |
MK-Hydrocolor Fanal Violet 27 | mk chemicals | MK-Hydrocolor Fanal Violet 27 is a purple colored pigment. It has a pH value of 7.0 to 9.0, a pigment content of 25% ± 1%, and a water value of 62% ± 1%. This product has good flocculation resistance and printing properties, and is used in pigment printin...展开 MK-Hydrocolor Fanal Violet 27 is a purple colored pigment. It has a pH value of 7.0 to 9.0, a pigment content of 25% ± 1%, and a water value of 62% ± 1%. This product has good flocculation resistance and printing properties, and is used in pigment printing preparations for water based flexo and gravure printings inks. 收起 | |
MK-Hydrocolor Green 7 | mk chemicals | MK-Hydrocolor Green 7 is a green colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 55% ± 1%, and a water value of 39% ± 1%. This product is used in the preparation of organic water based pigments that are used in paint...展开 MK-Hydrocolor Green 7 is a green colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 55% ± 1%, and a water value of 39% ± 1%. This product is used in the preparation of organic water based pigments that are used in paints and colors. 收起 | |
MK-Hydrocolor Green GN P. G. 17, VPA 344/20 | mk chemicals | MK-Hydrocolor Green GN P. G. 17, VPA 344/20 is a green colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 68% ± 1%, and a water value of 22% ± 1%. This product is used in the preparation of water based pigments that are...展开 MK-Hydrocolor Green GN P. G. 17, VPA 344/20 is a green colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 68% ± 1%, and a water value of 22% ± 1%. This product is used in the preparation of water based pigments that are used in coating binders, and colors. 收起 | |
MK-Hydrocolor Green P. G. 7, VPA 344/21 | mk chemicals | MK-Hydrocolor Green P. G. 7, VPA 344/21 is a green colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 40% ± 1%, and a water value of 38% ± 1%. This product is used in the preparation of water based pigments that are use...展开 MK-Hydrocolor Green P. G. 7, VPA 344/21 is a green colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 40% ± 1%, and a water value of 38% ± 1%. This product is used in the preparation of water based pigments that are used in coating binders, and colors. 收起 | |
MK-Hydrocolor Iron Oxide Black 306 | mk chemicals | MK-Hydrocolor Iron Oxide Black 306 is a black colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 60% ± 1%, and a water value of 40% ± 1%. This product is used in the preparation of inorganic water based pigments that ar...展开 MK-Hydrocolor Iron Oxide Black 306 is a black colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 60% ± 1%, and a water value of 40% ± 1%. This product is used in the preparation of inorganic water based pigments that are used in paints and colors. 收起 | |
MK-Hydrocolor Iron Oxide Black 318 | mk chemicals | MK-Hydrocolor Iron Oxide Black 318 is a black colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 60% ± 1%, and a water value of 40% ± 1%. This product is used in the preparation of inorganic water based pigments that ar...展开 MK-Hydrocolor Iron Oxide Black 318 is a black colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 60% ± 1%, and a water value of 40% ± 1%. This product is used in the preparation of inorganic water based pigments that are used in paints and colors. 收起 |