| #14 Sta-Brite | PCI Group, Inc. | #14 Sta-Brite is a clear, octadecanoic acid product, designed to enhance leafing aluminum in enamel and related systems. Improves the uniformity and brightness, leafing and leaf retention of all systems commonly used as leafing aluminum coatings. | |
| #249 HI-TECH | PCI Group, Inc. | #249 HI-TECH is a clear blend of Alkyl-Aryl modified silicones. It is designed for high solids coating systems to improve mar resistance without the standard recoat problems. Designed for use in virtually all high solids solvent-borne systems. | |
| 901-GDA-2 | PCI Group, Inc. | 901-GDA-2 is a clear, silicone-free polyvinyl isobutyl ether solution used to improve color development, leveling and gloss while controlling surface flooding and floating. It can be used with acrylic resin, alkyd (long, medium and short oils), polyamide,...展开 901-GDA-2 is a clear, silicone-free polyvinyl isobutyl ether solution used to improve color development, leveling and gloss while controlling surface flooding and floating. It can be used with acrylic resin, alkyd (long, medium and short oils), polyamide, polyester and urethane for pigmented and non-pigmented systems. 收起 | |
| 941 LBA | PCI Group, Inc. | 941 LBA is a clear, linear polydimethylsiloxane polymer designed for use in systems containing non-leafing aluminums. It provides higher brightness, controlled uniformity and burnishing and helps prevent “black” float. | |
| AMA | PCI Group, Inc. | AMA is a clear-colored dimethyl silicone which improves mar resistance and reduces surface tension in conventional solvent based coatings. Systems include: acrylic resins, alkyd, epoxy, lacquer, phenolic, polyester and urethane. It is recommended for clea...展开 AMA is a clear-colored dimethyl silicone which improves mar resistance and reduces surface tension in conventional solvent based coatings. Systems include: acrylic resins, alkyd, epoxy, lacquer, phenolic, polyester and urethane. It is recommended for clear topcoats. 收起 | |
| AMAFCA | PCI Group, Inc. | AMAFCA is a clear-colored Alkyl-Aryl silicone designed control foaming during application. It also promotes improved mar resistance for virtually all solvent based coating systems. It can control foaming in roller coater, flow coater, curtain coater, dip,...展开 AMAFCA is a clear-colored Alkyl-Aryl silicone designed control foaming during application. It also promotes improved mar resistance for virtually all solvent based coating systems. It can control foaming in roller coater, flow coater, curtain coater, dip, conventional and airless spray systems. 收起 | |
| AMMA | PCI Group, Inc. | AMMA is a non-ionic, clear-colored polyalkyeneoxide-modified polydimethylsiloxane developed for high solids / high solids metallic coatings. It helps prevent mottling, enhances color uniformity and increases the sharpness of gloss. Systems include: acryl...展开 AMMA is a non-ionic, clear-colored polyalkyeneoxide-modified polydimethylsiloxane developed for high solids / high solids metallic coatings. It helps prevent mottling, enhances color uniformity and increases the sharpness of gloss. Systems include: acrylic resins, alkyds, epoxy, melamine, phenolic, polyamide, polyester, urea and urethane. 收起 | |
| Anhydrite | Provencale S.A. | Anhydrite is a filler that can withstand humidity. It is finely ground and dressed natural anhydrite that is a waterless sulphate. It is often formed as an evaporation product from sea water subject to progressive concentration of the salt water solution....展开 Anhydrite is a filler that can withstand humidity. It is finely ground and dressed natural anhydrite that is a waterless sulphate. It is often formed as an evaporation product from sea water subject to progressive concentration of the salt water solution. Anhydrite makes up the sturdy solid base of gypsum deposits and can be mined separately. It is for use in industrial paints, lacquers and adhesives. 收起 | |
| APACA | PCI Group, Inc. | APACA is a clear, non-ionic modified dimethyl polysiloxane co-polymer solution for use in water-borne and water-reducible products. It will assist in the reduction of surface defects by altering the surface tension of the coating. It will also increase gl...展开 APACA is a clear, non-ionic modified dimethyl polysiloxane co-polymer solution for use in water-borne and water-reducible products. It will assist in the reduction of surface defects by altering the surface tension of the coating. It will also increase gloss, slip and mar resistance. 收起 | |
| ASAFA | PCI Group, Inc. | ASAFA is a pale amber colored blend of a dimethyl silicone and refined naphthenic base oil. Designed for use in conventional systems such as acrylic resins, alkyds, polyamide, polyester and urethane. It acts to control silking, flooding and pigment float ...展开 ASAFA is a pale amber colored blend of a dimethyl silicone and refined naphthenic base oil. Designed for use in conventional systems such as acrylic resins, alkyds, polyamide, polyester and urethane. It acts to control silking, flooding and pigment float while sharpening gloss, improving pigment wetting and enhancing leveling. 收起 | |
| ASAFA #3 | PCI Group, Inc. | ASAFA #3 is a clear-colored linear polydimethylsiloxane polymer used where floating or silking is a problem. It effectively balances out solvents during the air dry process. It can be used in coating systems such as alkyds, modified alkyds, acrylics, epox...展开 ASAFA #3 is a clear-colored linear polydimethylsiloxane polymer used where floating or silking is a problem. It effectively balances out solvents during the air dry process. It can be used in coating systems such as alkyds, modified alkyds, acrylics, epoxies, vinyls and most oleo-resinous non-aqueous systems. 收起 | |
| ASAFAMA | PCI Group, Inc. | ASAFAMA is a clear-colored, highly-modified silicone fluid designed for use in systems where a dimethyl silicone may be a problem. It is useful for enhancing the defoaming properties of applied coatings, and sharpens gloss, improves color acceptance and i...展开 ASAFAMA is a clear-colored, highly-modified silicone fluid designed for use in systems where a dimethyl silicone may be a problem. It is useful for enhancing the defoaming properties of applied coatings, and sharpens gloss, improves color acceptance and improves mar resistance without recoating problems. 收起 | |
| ASASWA | PCI Group, Inc. | ASASWA is a light amber, highly modified reactive polyamide resin solution. It can be used in acid-catalyzed, alkyds (short, medium and long oils), epoxy, epoxy ester, polyurethane and high solids polyester systems. It increases resistance to sag, allows ...展开 ASASWA is a light amber, highly modified reactive polyamide resin solution. It can be used in acid-catalyzed, alkyds (short, medium and long oils), epoxy, epoxy ester, polyurethane and high solids polyester systems. It increases resistance to sag, allows for enhanced pigment wetting and color development and eliminates hard settling. 收起 | |
| ASLA | PCI Group, Inc. | ASLA is a clear, silicone-free, polyvinyl ethyl ether solution used to improve color development, leveling and gloss while controllling surface flooding and floating. It can be used in acrylic resins, alkyds (long, med., short oils), polyamide, polyester ...展开 ASLA is a clear, silicone-free, polyvinyl ethyl ether solution used to improve color development, leveling and gloss while controllling surface flooding and floating. It can be used in acrylic resins, alkyds (long, med., short oils), polyamide, polyester and urethane pigmented and non-pigmented systems. 收起 | |
| C-485-FBRA | PCI Group, Inc. | C-485-FBRA is a clear alkyl-aryl air release agent which acts as a foam and bubble release agent. It is compatible with conventional systems: acrylic resins, alkyds, lacquers, melamine, phenolic, polyamide, polyester and urethane. It also acts to improve ...展开 C-485-FBRA is a clear alkyl-aryl air release agent which acts as a foam and bubble release agent. It is compatible with conventional systems: acrylic resins, alkyds, lacquers, melamine, phenolic, polyamide, polyester and urethane. It also acts to improve leveling and slip. 收起 | |
| CALGAR® 0.35-0.7 | Provencale S.A. | CALGAR® 0.35-0.7, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. This product's mean particle size is 500 microns. Its pH in a water solution lies between 8.5 and 9.5, and its specific gravity ...展开 CALGAR® 0.35-0.7, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. This product's mean particle size is 500 microns. Its pH in a water solution lies between 8.5 and 9.5, and its specific gravity is 2.7. 收起 | |
| CALGAR® 0.5-1.5 | Provencale S.A. | CALGAR® 0.5-1.5, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. This product's untamped apparent density is 1.3. Its pH in a water solution lies between 8.5 and 9.5, and its specific gravity is...展开 CALGAR® 0.5-1.5, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. This product's untamped apparent density is 1.3. Its pH in a water solution lies between 8.5 and 9.5, and its specific gravity is 2.7. 收起 | |
| CALGAR® 130 | Provencale S.A. | CALGAR® 130, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. This product's mean particle size is 140 microns. Its pH in a water solution lies between 8.5 and 9.5, and its specific gravity is 2....展开 CALGAR® 130, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. This product's mean particle size is 140 microns. Its pH in a water solution lies between 8.5 and 9.5, and its specific gravity is 2.7. 收起 | |
| CALGAR® 1.5-3 | Provencale S.A. | CALGAR® 1.5-3, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. This product's untamped apparent density is 1.3. Its pH in a water solution lies between 8.5 and 9.5, and its specific gravity is 2...展开 CALGAR® 1.5-3, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. This product's untamped apparent density is 1.3. Its pH in a water solution lies between 8.5 and 9.5, and its specific gravity is 2.7. 收起 | |
| CALGAR® 40 | Provencale S.A. | CALGAR® 40, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. This product's mean particle size is 12 microns. Its pH in a water solution lies between 8.5 and 9.5, and its specific gravity is 2.7. | |
| CALGAR® 80-800 | Provencale S.A. | CALGAR® 80-800, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. This product's untamped apparent density is 1.4. Its pH in a water solution lies between 8.5 and 9.5, and its specific gravity is ...展开 CALGAR® 80-800, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. This product's untamped apparent density is 1.4. Its pH in a water solution lies between 8.5 and 9.5, and its specific gravity is 2.7. 收起 | |
| CHEM-REZ A-1050 | PCI Group, Inc. | CHEM-REZ A-1050 is a clear poly vinyl ethyl isoburyl ether solution recommended for use in most conventional and high solid coating systems. It increases adhesion and flexibility, improves flow and leveling, acts as a plasticizer for coatings and inks and...展开 CHEM-REZ A-1050 is a clear poly vinyl ethyl isoburyl ether solution recommended for use in most conventional and high solid coating systems. It increases adhesion and flexibility, improves flow and leveling, acts as a plasticizer for coatings and inks and is useful in dip and flow coater systems. 收起 | |
| CLAWB | PCI Group, Inc. | CLAWB is a clear, colorless liquid comprised of and epoxy functional silane which serves as a crosslinker and adhesion promoter. It is intended for formulations containing acrylic latexes and polyurethane dispersions with carboxy or amino functionality. W...展开 CLAWB is a clear, colorless liquid comprised of and epoxy functional silane which serves as a crosslinker and adhesion promoter. It is intended for formulations containing acrylic latexes and polyurethane dispersions with carboxy or amino functionality. Waterborne coating formulations using CLAWB show improved solvent, impact and mar resistance, superior wet and dry adhesion, gloss retention upon aging and improved stain resistance in wood coatings. 收起 | |
| Corindon Synthétique | Provencale S.A. | Corindon Synthétique, in the form of a grey powder, is an industrial raw material. This product is composed of about 99% aluminum oxide. It can be used in abrasion-resistant wood or decorative coatings. Its surface is often treated with silanes or sila...展开 Corindon Synthétique, in the form of a grey powder, is an industrial raw material. This product is composed of about 99% aluminum oxide. It can be used in abrasion-resistant wood or decorative coatings. Its surface is often treated with silanes or silane-based substances. 收起 | |
| Criscal 0.5-1 | Provencale S.A. | Criscal 0.5-1, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. Its untamped apparent density is 1.3. Its specific gravity is 2.7 and its refractive index is 1.59. | |
| Criscal 1 | Provencale S.A. | Criscal 1, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. Its mean particle size is 1.6 microns. Its specific gravity is 2.7 and its refractive index is 1.59. | |
| Criscal 10 | Provencale S.A. | Criscal 10, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. Its mean particle size is 10 microns. Its specific gravity is 2.7 and its refractive index is 1.59. | |
| Criscal 1.5-2.5 | Provencale S.A. | Criscal 1.5-2.5, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. Its untamped apparent density is 1.3. Its specific gravity is 2.7 and its refractive index is 1.59. | |
| Criscal 2 | Provencale S.A. | Criscal 2, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. Its mean particle size is 3 microns. Its specific gravity is 2.7 and its refractive index is 1.59. | |
| Criscal 2-4 | Provencale S.A. | Criscal 2-4, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. Its untamped apparent density is 1.3. Its specific gravity is 2.7 and its refractive index is 1.59. | |
| Criscal 5 | Provencale S.A. | Criscal 5, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. Its mean particle size is 5 microns. Its specific gravity is 2.7 and its refractive index is 1.59. | |
| Criscal 80-800 | Provencale S.A. | Criscal 80-800, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. Its untamped apparent density is 1.3. Its specific gravity is 2.7 and its refractive index is 1.59. | |
| CSV-3000 | PCI Group, Inc. | CSV-3000 is a thixotropic, milky white oil emulsion intended for blending with high Tg acrylic and polyurethane emulsions. The end product will provide semi-transparent concrete stains. It is intended to penetrate and seal the surface, minimizing water tr...展开 CSV-3000 is a thixotropic, milky white oil emulsion intended for blending with high Tg acrylic and polyurethane emulsions. The end product will provide semi-transparent concrete stains. It is intended to penetrate and seal the surface, minimizing water transmission. The basic film properties are determined by the added emulsion. 收起 | |
| ExBar™ 200 | Excalibar Minerals LLC | ExBar™ 200 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 15.0u and an oil absorption of 9. | |
| ExBar™ 325 | Excalibar Minerals LLC | ExBar™ 325 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 10.0u and an oil absorption of 10. | |
| ExBar™ 400 | Excalibar Minerals LLC | ExBar™ 400 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 8.0u and an oil absorption of 12. | |
| ExBar™ W 1 | Excalibar Minerals LLC | ExBar™ W 1 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 1 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 1u and an oil absorption of 15. 收起 | |
| ExBar™ W 2 | Excalibar Minerals LLC | ExBar™ W 2 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 2 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 2u and an oil absorption of 13. 收起 | |
| ExBar™ W 3 | Excalibar Minerals LLC | ExBar™ W 3 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 3 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 3u and an oil absorption of 13. 收起 | |
| ExBar™ W 325 | Excalibar Minerals LLC | ExBar™ W 325 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are pr...展开 ExBar™ W 325 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. 收起 | |
| ExBar™ W 4 | Excalibar Minerals LLC | ExBar™ W 4 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 4 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 4u and an oil absorption of 12. 收起 | |
| ExBar™ W 400 | Excalibar Minerals LLC | ExBar™ W 400 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are pr...展开 ExBar™ W 400 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 8u and an oil absorption of 10. 收起 | |
| ExCal® 100 | Excalibar Minerals LLC | ExCal® 100 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |
| ExCal® 200 | Excalibar Minerals LLC | ExCal® 200 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |
| ExCal® 325 | Excalibar Minerals LLC | ExCal® 325 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |
| ExCal® 400 | Excalibar Minerals LLC | ExCal® 400 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |
| ExCal® CW 100 | Excalibar Minerals LLC | ExCal® CW 100 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 100 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起 | |
| ExCal® CW 200 | Excalibar Minerals LLC | ExCal® CW 200 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 200 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起 | |
| ExCal® CW 325 | Excalibar Minerals LLC | ExCal® CW 325 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 325 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起 | |
| EXOCOAT™ 143 | Axcentive Sarl | EXOCOAT® 143 by Axcentive is a solvent-based organometallic resin (60% solids in Butyl acetate). It is characterized by non-sticky, hydrophobic, and oleophobic properties. Provides strong adhesion to steel, aluminum, glass, and plastics like PMMA and ABS ...展开 EXOCOAT® 143 by Axcentive is a solvent-based organometallic resin (60% solids in Butyl acetate). It is characterized by non-sticky, hydrophobic, and oleophobic properties. Provides strong adhesion to steel, aluminum, glass, and plastics like PMMA and ABS as well as to old coating layers. It covalently bonds with the substrate resulting in a very durable finish. It can be used as a standalone resin or might be formulated with other raw materials like white and colored pigments, organic resins, fillers, and additives. The use of water-based raw materials should be avoided. Durability is a unique feature of EXOCOAT® 143. It can sustain mechanical abrasion, and chemical attack and is UV stable. When applied at a very low layer thickness of 0.5 to 2µm it provides the surface with a protective hard coating that shows durable easy-to-clean, dirt resistance, anti-graffiti, and strong water repellency properties. It is suitable for ambient or force-cured, high-performance industrial coatings such as protective, coil, marine, and automotive. EXOCOAT® 143-based paints may be brushed, rolled, or sprayed by HVLP or airless spray. 收起 | |
| EXOCOAT™ 151A | Axcentive Sarl | EXOCOAT® 151A by Axcentive is a photocatalytic nano-titanium oxide sol with a strong self-cleaning performance. The photocatalytic effect results in effective radical formation which breaks down organic matter like dirt and soil. Airborne particles like V...展开 EXOCOAT® 151A by Axcentive is a photocatalytic nano-titanium oxide sol with a strong self-cleaning performance. The photocatalytic effect results in effective radical formation which breaks down organic matter like dirt and soil. Airborne particles like VOCs, NOx, and biopollution are also eradicated by EXOCOAT® 151A. It can be used as a general air purifier. Though most effective in outdoor light conditions, it is adapted for use under visible light as found in the interior. In all cases, it should be used as a topcoat to ensure its full effect. Glass and walls coated with EXOCOAT® 151A are super hydrophilic enhancing water-sheeting, also called the wash-off effect. It may be used on other flat surfaces such as plastics or coated substrates yet only interior. It dries under room temperature conditions. Spray application is recommended to reach thin monolayers which prove to be more effective. It is listed with EINECS. TSCA, AICS, and CEPA. 收起 | |
| EXOCOAT™ 151B | Axcentive Sarl | EXOCOAT® 151B by Axcentive is a photocatalytic nano-titanium oxide sol with a strong self-cleaning performance. The photocatalytic effect results in effective radical formation which breaks down organic matter like dirt and soil. Airborne particles like V...展开 EXOCOAT® 151B by Axcentive is a photocatalytic nano-titanium oxide sol with a strong self-cleaning performance. The photocatalytic effect results in effective radical formation which breaks down organic matter like dirt and soil. Airborne particles like VOCs, NOx, and biopollution are also eradicated by EXOCOAT® 151B. In all cases, it should be used as a topcoat to ensure its full effect. EXOCOAT® 151B coated walls are super hydrophilic enhancing water-sheeting, also called the wash-off effect. It is targeted for porous substrates like concrete, brickwork, and gypsum. It is not meant for glass substrates. It dries under room temperature conditions. Brush, roller, or Spray application is recommended to reach homogeneous coatings. It is listed with EINECS. TSCA, AICS, and CEPA. 收起 | |
| EXOCOAT™ 161 | Axcentive Sarl | EXOCOAT® 161 by Axcentive is a multipurpose, high-performance coating resin. It is preceramic, as it cures the ceramic layer. Upon curing, it converts to an inorganic highly cross linked layer with excellent barrier properties, high durability, and extre...展开 EXOCOAT® 161 by Axcentive is a multipurpose, high-performance coating resin. It is preceramic, as it cures the ceramic layer. Upon curing, it converts to an inorganic highly cross linked layer with excellent barrier properties, high durability, and extreme hardness (9H). Offers chemical-, scratch-, oxidation resistance, and temperature resistance over 1000°C for prolonged time. It can function as stand-alone resin at a layer thickness of 0.5 to 2 µm to form a durable finish that can be easy to clean. It bonds to substrates such as steel, aluminum, glass, and old coating layers. It can be used as conversion coating replacing Cr(VI). It may be co-formulated with the most frequently used coating ingredients from the group of pigments, fillers, resins, additives, and (co-)solvents and creates colored, super hard, or matte surfaces. EXOCOAT® 161 is highly advised to be used in aprotic solvents. It has a shelf life of 6 months. 收起 | |
| EXOCOAT™ AC | Axcentive Sarl | EXOCOAT® AC by Axcentive is a hybrid sol-gel resin for anti-corrosive conversion coatings in 60% ethanol. It is covalently bonded to the surface and applied directly to metal (iron alloy, galvanized steel, phosphate steel, stainless steel, and aluminum). ...展开 EXOCOAT® AC by Axcentive is a hybrid sol-gel resin for anti-corrosive conversion coatings in 60% ethanol. It is covalently bonded to the surface and applied directly to metal (iron alloy, galvanized steel, phosphate steel, stainless steel, and aluminum). It functions as a replacement for the Cr3+ and Cr6+ based system as used in metal plating and automotive industries. It converts the metal hydroxide surface into a stable, inert covalently bound monolayer. It can also be used as micrometer-thin primers under conventional organic coatings. It can be overcoated by epoxy primer or polyurethane topcoat systems. EXOCOAT® AC is suitable for conventional low & high pressure airless and air-mixing spraying, dipping, rolling, and brushing. It has a shelf life of 12 months. 收起 | |
| EXOCOAT™ ACX-W | Axcentive Sarl | EXOCOAT® ACX-W by Axcentive is a water-dilutable nanoparticle-modified anticorrosive conversion coating that covalently bonds to the surface through nanoparticles. It is applied directly to metals (iron alloy, galvanized steel, phosphate steel, stainless ...展开 EXOCOAT® ACX-W by Axcentive is a water-dilutable nanoparticle-modified anticorrosive conversion coating that covalently bonds to the surface through nanoparticles. It is applied directly to metals (iron alloy, galvanized steel, phosphate steel, stainless steel, and aluminum). It converts the metal hydroxide surface into a stable, inert covalently bound monolayer. It is used as a replacement for chromium-based primers on aluminum and other metals. It can be used as a conversion primer for a coating system based on an epoxy coating and polyurethane topcoat. It may omit toxic chemicals and functions as a replacement for Cr3+ and Cr6+-based systems used in metal plating and aerospace industries. EXOCOAT® ACX-W is applied with conventional low-pressure and high-pressure airless and air-mix spraying, dipping, rolling and brushing. It has a shelf life of 12 months. 收起 | |
| EXOCOAT™ AM | Axcentive Sarl | EXOCOAT® AM by Axcentive is a water-based, doped nano-titanium oxide sol with a strong antimicrobial effect and anatase structure. It prevents the build-up of microbes as the photocatalytic effect results in effective radical formation which breaks down v...展开 EXOCOAT® AM by Axcentive is a water-based, doped nano-titanium oxide sol with a strong antimicrobial effect and anatase structure. It prevents the build-up of microbes as the photocatalytic effect results in effective radical formation which breaks down viruses and bacteria. It eradicates viruses such as influenza, SARS-COV-2, dengue & hepatitis and bacteria such as E. coli, MSRA, streptococcus, listeria, pneumonia, and salmonella. It is activated by light and displays quick drying at room temperature. Spray application is recommended to reach thin monolayers. It exhibits curing at room temperature up to 300°C and super hard particles (1GPa Vickers). It is easy to apply & durable, allowing longer disinfection intervals while preserving hygiene level. It shows non-silver leaching, efficacious even under low light conditions, lower service frequency, and no need for frequent disinfection routine. It is used in the state-of-the-art continuous antimicrobial coating for high-traffic areas. EXOCOAT® AM is suitable for topcoats for any surface inside buildings, stores, hospitals, and vehicles. The shelf life of this product is 9 months. 收起 | |
| EXOCOAT™ Clearview | Axcentive Sarl | EXOCOAT® Clearview by Axcentive is a 1K hybrid sol-gel system in ethanol. It has been designed for water-repellent, easy-to-clean coatings for glass and ceramic substrates. A substrate coated with EXOCOAT® Clearview will turn into a hard, water-repellent ...展开 EXOCOAT® Clearview by Axcentive is a 1K hybrid sol-gel system in ethanol. It has been designed for water-repellent, easy-to-clean coatings for glass and ceramic substrates. A substrate coated with EXOCOAT® Clearview will turn into a hard, water-repellent durable easy-to-clean surface. EXOCOAT® Clearview keeps windscreens clean from raindrops and improves vision drastically, especially in difficult wet road conditions, which can be experienced day and night. Besides, it can be used to make easy-to-clean, water shedding tiles and chrome for example used in kitchens and bathrooms. 收起 | |
| EXOCOAT™ Clearview-2 | Axcentive Sarl | EXOCOAT® Clearview-2 by Axcentive is a 2K hybrid sol-gel in ethanol. It is designed for durable water repellent, easy-to-clean, dirt resistant glass coatings. This solvent-based nanosystem can be applied in coatings for automotive windscreens, or glass ba...展开 EXOCOAT® Clearview-2 by Axcentive is a 2K hybrid sol-gel in ethanol. It is designed for durable water repellent, easy-to-clean, dirt resistant glass coatings. This solvent-based nanosystem can be applied in coatings for automotive windscreens, or glass bathroom doors. It can be applied as such or diluted, in coatings as a monolayer to obtain a very hard and durable hydrophobic surface. EXOCOAT® Clearview-2 keeps windows clean from raindrops and improves vision drastically, especially in difficult wet road conditions, which can be experienced day and night. In bathroom glass, it makes the water run down fast and avoids water spots. 收起 | |
| EXOCOAT™ SH | Axcentive Sarl | EXOCOAT® SH by Axcentive is an inorganic 1K superhydrophobic Sol-Gel system for breathable concrete and masonry sealers. It has extremely high water exclusion properties which helps to produce superhydrophobic coatings. It can be applied on concrete, pave...展开 EXOCOAT® SH by Axcentive is an inorganic 1K superhydrophobic Sol-Gel system for breathable concrete and masonry sealers. It has extremely high water exclusion properties which helps to produce superhydrophobic coatings. It can be applied on concrete, pavement, walls, and stucco to get the so-called Lotus Effect. The sol-gel system deposits superhydrophobic particles on the porous substrate. EXOCOAT® SH will not form a film and as a result, the wall stays breathable. With the contact angle of 145o water droplets bounce back from the surface and will roll down immediately upon touch. Thus, the wall remains dry, and clean and will behave as an efficient barrier against water. 收起 | |
| FCABA 2 | PCI Group, Inc. | FCABA 2 is a slightly cloudy blend of silicone and organic acid esters. It can be used in most non-aqueous based coating systems, adhesives and inks. It will prevent bubble and foaming in flow coat, curtain coater, dip, roller coater, conventional and air...展开 FCABA 2 is a slightly cloudy blend of silicone and organic acid esters. It can be used in most non-aqueous based coating systems, adhesives and inks. It will prevent bubble and foaming in flow coat, curtain coater, dip, roller coater, conventional and airless spray applications. It is stable over a wide temperature range. 收起 | |
| Feldspar | Provencale S.A. | Feldspar, in the form of a crystalline solid, is a chemically resistant silicate with a thick-slated grain morphology. This product can be used in clear lacquer systems, UV-hardening lacquers, dispersion paints, silicate paints and plasters, and in plast...展开 Feldspar, in the form of a crystalline solid, is a chemically resistant silicate with a thick-slated grain morphology. This product can be used in clear lacquer systems, UV-hardening lacquers, dispersion paints, silicate paints and plasters, and in plastic films. It is mostly a potash feldspar that has been processed and separated by a screening technique that includes classification and micro-grinding. 收起 | |
| FSDS | PCI Group, Inc. | FSDS is a clear liquid comprised of a blend of fluorosurfactant diols. It is intended to provide improved flow, leveling and reduced surface waviness and orange peel without associated air entrainment problems. It reduces the need for multiple additives b...展开 FSDS is a clear liquid comprised of a blend of fluorosurfactant diols. It is intended to provide improved flow, leveling and reduced surface waviness and orange peel without associated air entrainment problems. It reduces the need for multiple additives by acting as a de-aerator and flow / leveling agent. It is well suited for clear formulations and readily miscible with alkyds, polyesters, cellulosics, acrylics and high solids coating systems. 收起 | |
| HSADA-42 | PCI Group, Inc. | HSADA-42 is a clear fluoroaliphatic polymeric ester used in solvent, high solids and UV curable coating systems. It is non-ionic and works to reduce or eliminate problems associated with surface tension such as craters, fisheyes, picture framing and orang...展开 HSADA-42 is a clear fluoroaliphatic polymeric ester used in solvent, high solids and UV curable coating systems. It is non-ionic and works to reduce or eliminate problems associated with surface tension such as craters, fisheyes, picture framing and orange peel. HSADA-42 is active throughout the curing process and demonstrates significantly less foam development than many other fluorosurfactants. 收起 | |
| HSADA-44 | PCI Group, Inc. | HSADA-44 is a clear, fluoroaliphatic polymeric ester used in solvent, high solids and aqueous coating systems. It is non-ionic and works to reduce or eliminate problems associated with surface tension such as craters, fish-eyes, picture framing and orange...展开 HSADA-44 is a clear, fluoroaliphatic polymeric ester used in solvent, high solids and aqueous coating systems. It is non-ionic and works to reduce or eliminate problems associated with surface tension such as craters, fish-eyes, picture framing and orange peel. HSADA-44 is active throughout the curing process and demonstrates significantly less foam development than other fluorosurfactants. 收起 | |
| HSWADA | PCI Group, Inc. | HSWADA is an amber-colored blend of a pale tall oil fatty acid with moderate rosin acid content and an anionic wetting and dispersing agent. It improves substrate wetting, enhances viscosity stability and prevents hard settling while increasing the pigmen...展开 HSWADA is an amber-colored blend of a pale tall oil fatty acid with moderate rosin acid content and an anionic wetting and dispersing agent. It improves substrate wetting, enhances viscosity stability and prevents hard settling while increasing the pigment grinding speed. It is designed for systems such as alkyds, drying oils, amino resins, vinyls, acrylics, oil modified urethanes, polyesters, and epoxy esters. 收起 | |
| HSWADA-60 | PCI Group, Inc. | HSWADA-60 is an amber colored blend of a functional capped amine with tall oil fatty acid. The resulting product is a wetting agent with high efficiency toward alkaline based pigments. It can be used with alkyd, drying oil, amino resin, vinyl, acrylic, oi...展开 HSWADA-60 is an amber colored blend of a functional capped amine with tall oil fatty acid. The resulting product is a wetting agent with high efficiency toward alkaline based pigments. It can be used with alkyd, drying oil, amino resin, vinyl, acrylic, oil modified urethane, polyester, epoxy, and epoxy ester coating systems. 收起 | |
| HSWADA-B | PCI Group, Inc. | HSWADA-B is an amber colored blend of amine chemistry with dimerized acids. The resulting product is a wetting agent with high efficiency toward acidic based pigments. It has an affinity for alkaline pigments. It can be used with alkyd, drying oil, amino ...展开 HSWADA-B is an amber colored blend of amine chemistry with dimerized acids. The resulting product is a wetting agent with high efficiency toward acidic based pigments. It has an affinity for alkaline pigments. It can be used with alkyd, drying oil, amino resin, vinyl, acrylic, oil modified urethane, polyester, epoxy, epoxy ester and polyester coating systems. 收起 | |
| Kaolin | Provencale S.A. | Kaolin, in the form of a hexagonal, flexible, thin lamina, is a naturally occurring raw material that can be used in dispersion paints or dispersion adhesives. Its density is 2.6 g/cm3 and it has a high aspect ratio of 1:40. | |
| LH-75 | PCI Group, Inc. | LH-75 is a slightly yellow amide polymer modifier additive that will improve depth of image (wet-look), enhance gloss, increase hardness and scratch resistance and will improve resin compatibility and flow. It can be used in many types of lacquers includi...展开 LH-75 is a slightly yellow amide polymer modifier additive that will improve depth of image (wet-look), enhance gloss, increase hardness and scratch resistance and will improve resin compatibility and flow. It can be used in many types of lacquers including nitrocellulose, acrylic, polyurethane and acid-catalyzed varnishes. It is also effective in polyester / melamine systems. It is not recommended in systems with a high level of aliphatic hydrocarbons. 收起 | |
| MFA 31 | PCI Group, Inc. | MFA 31 is a non-ionic, clear, recoatable polyalkyeneoxide modified polydimethylsiloxane developed for water-borne and water-reducible systems. It can be used to eliminate film defects, such as craters, through refined flow and leveling. It also enhances c...展开 MFA 31 is a non-ionic, clear, recoatable polyalkyeneoxide modified polydimethylsiloxane developed for water-borne and water-reducible systems. It can be used to eliminate film defects, such as craters, through refined flow and leveling. It also enhances color uniformity and allows for sharper gloss. 收起 | |
| Mikhart® 0.35-0.7 | Provencale S.A. | Mikhart® 0.35-0.7, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. This product's particle size range is between .25 and .9 mm. Its specific gravity is 2.7 and its refractive index is 1.59. | |
| Mikhart® 0.5-1 | Provencale S.A. | Mikhart® 0.5-1, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. This product's particle size range is between 0.7-1.2 mm. Its specific gravity is 2.7 and its refractive index is 1.59. | |
| Mikhart® 0.5-1.5 | Provencale S.A. | Mikhart® 0.5-1.5, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. This product's particle size range is between 0.63-1.8 mm. Its specific gravity is 2.7 and its refractive index is 1.59. | |
| Mikhart® 1 | Provencale S.A. | Mikhart® 1, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. This product's mean particle size is 1.7 microns. Its specific gravity is 2.7 and its refractive index is 1.59. | |
| Mikhart® 1-2 | Provencale S.A. | Mikhart® 1-2, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. This product's particle size range is between 1.4-2.5 mm. Its specific gravity is 2.7 and its refractive index is 1.59. | |
| Mikhart® 10 | Provencale S.A. | Mikhart® 10, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. This product's mean particle size is 10 microns. Its specific gravity is 2.7 and its refractive index is 1.59. | |
| Mikhart® 110 | Provencale S.A. | Mikhart® 110, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. This product's particle size range is between 0-1 mm. Its specific gravity is 2.7 and its refractive index is 1.59. | |
| Mikhart® 130 | Provencale S.A. | Mikhart® 130, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. This product's mean particle size is 140 microns. Its specific gravity is 2.7 and its refractive index is 1.59. | |
| Mikhart® 15 | Provencale S.A. | Mikhart® 15, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. This product's mean particle size is 17 microns. Its specific gravity is 2.7 and its refractive index is 1.59. | |
| Mikhart® 2 | Provencale S.A. | Mikhart® 2, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. This product's mean particle size is 3 microns. Its specific gravity is 2.7 and its refractive index is 1.59. | |
| Mikhart® 40 | Provencale S.A. | Mikhart® 40, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. This product's mean particle size is 30 microns. Its specific gravity is 2.7 and its refractive index is 1.59. | |
| Mikhart® 5 | Provencale S.A. | Mikhart® 5, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. This product's mean particle size is 5 microns. Its specific gravity is 2.7 and its refractive index is 1.59. | |
| Mikhart® 65 | Provencale S.A. | Mikhart® 65, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. This product's mean particle size is 60 microns. Its specific gravity is 2.7 and its refractive index is 1.59. | |
| Mikhart® M | Provencale S.A. | Mikhart® M, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. This product's mean particle size is 3.5 microns. Its specific gravity is 2.7 and its refractive index is 1.59. | |
| Mikhart® MU08 | Provencale S.A. | Mikhart® MU08, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. This product's mean particle size is .9 microns. Its specific gravity is 2.7 and its refractive index is 1.59. | |
| Mikhart® MU12 | Provencale S.A. | Mikhart® MU12, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. This product's mean particle size is 1.2 microns. Its specific gravity is 2.7 and its refractive index is 1.59. | |
| Mikhart® SPL | Provencale S.A. | Mikhart® SPL, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. This product's mean particle size is 20 microns. Its specific gravity is 2.7 and its refractive index is 1.59. | |
| NOFO 1032 | PCI Group, Inc. | NOFO 1032 is a blend of clear silicone and organic acid esters. It is used in most non-aqueous based coating systems, adhesives and inks. It fosters the release of air from high build epoxy, urethane, and casting resins. It is stable over a wide temperatu...展开 NOFO 1032 is a blend of clear silicone and organic acid esters. It is used in most non-aqueous based coating systems, adhesives and inks. It fosters the release of air from high build epoxy, urethane, and casting resins. It is stable over a wide temperature range and will not cause surface defects associated with most silicone defoamers. 收起 | |
| NVOCF-WB | PCI Group, Inc. | NVOCF-WB is a clear liquid, non-ionic, water soluble fluorosurfactant designed to improve flow, leveling and surface appearance of water based coating systems. It contains no volatile organic components, has excellent water solubility and is recommended f...展开 NVOCF-WB is a clear liquid, non-ionic, water soluble fluorosurfactant designed to improve flow, leveling and surface appearance of water based coating systems. It contains no volatile organic components, has excellent water solubility and is recommended for use in clear coatings. NVOCF-WB can be added at any point during the manufacturing and/or use processes. 收起 | |
| OWSS | PCI Group, Inc. | OWSS is a non-ionic, clear liquid which acts as a multifunctional solubilizer and surfactant. It can be used in a wide range of products and applications including paint & coatings, water based degreasers and printing inks. | |
| RAMA | PCI Group, Inc. | RAMA is a recoatable, clear-colored blend of Alkyl-Aryl modified silicones. It is used to improve mar resistance without the standard recoat problems of common silicones. It can be used in virtually all solvent-borne systems to reduce flooding and floatin...展开 RAMA is a recoatable, clear-colored blend of Alkyl-Aryl modified silicones. It is used to improve mar resistance without the standard recoat problems of common silicones. It can be used in virtually all solvent-borne systems to reduce flooding and floating, improve flow, sharpen gloss and improve slip. 收起 | |
| SA #1 | PCI Group, Inc. | SA #1 is a clear-colored silicone blend useful in high solids coatings. Its primary function is to improve flow and leveling during application, including elimination of bubbles during application, reducing orange peel and improving the final product's ma...展开 SA #1 is a clear-colored silicone blend useful in high solids coatings. Its primary function is to improve flow and leveling during application, including elimination of bubbles during application, reducing orange peel and improving the final product's mar resistance. It can be used in virtually all high solids resins. 收起 | |
| SAFA 302 | PCI Group, Inc. | SAFA 302 is a clear-colored blend comprised of polyether modified dimethlylpolysiloxane and silicone glycol co-polymer. Together, these provide defoaming, mar resistance, increased resin compatibility, surface tension reduction and lowering of the coeffic...展开 SAFA 302 is a clear-colored blend comprised of polyether modified dimethlylpolysiloxane and silicone glycol co-polymer. Together, these provide defoaming, mar resistance, increased resin compatibility, surface tension reduction and lowering of the coefficient of friction. It is compatible with most types of solvent and water systems, including emulsions. 收起 | |
| SCABA | PCI Group, Inc. | SCABA is a light amber reactive polyamide resin solution that is intended to increase viscosity and improve sag resistance for pigmented systems. It can be used in acid-catalyzed, alkyds (short, medium and long oils), epoxy, epoxy ester, polyurethane and ...展开 SCABA is a light amber reactive polyamide resin solution that is intended to increase viscosity and improve sag resistance for pigmented systems. It can be used in acid-catalyzed, alkyds (short, medium and long oils), epoxy, epoxy ester, polyurethane and polyester. 收起 | |
| SLICKO 1000 | PCI Group, Inc. | SLICKO 1000 is a clear liquid with a medium viscosity. It is a blend of linear dimethicone polymers and aliphatic solvent, used as an automotive, aircraft and aerospace paint additive. It can be added in small quantities, approximately 0.1% by weight or v...展开 SLICKO 1000 is a clear liquid with a medium viscosity. It is a blend of linear dimethicone polymers and aliphatic solvent, used as an automotive, aircraft and aerospace paint additive. It can be added in small quantities, approximately 0.1% by weight or volume, to eliminate fish-eye and enhance gloss and scratch/mar resistance. It is not reactive and is effective in all solvent based enamels, lacquers and synthetic paints, including catalyzed systems such as urethanes. 收起 | |
| So-Thick 30 | PCI Group, Inc. | So-Thick 30 is a translucent, non-ionic, non-urethane based associative thickener. It is specifically designed for high quality latex paints, high gloss, semi gloss and flat finishes in interior or exterior applications. It provides flow, leveling and thi...展开 So-Thick 30 is a translucent, non-ionic, non-urethane based associative thickener. It is specifically designed for high quality latex paints, high gloss, semi gloss and flat finishes in interior or exterior applications. It provides flow, leveling and thinning enhancements, good color acceptance and sag resistance. It can also be used in adhesives, sealants and inks. 收起 | |
| SSAWB | PCI Group, Inc. | SSAWB is a milky white additive allowing the formulator to create a sanding sealer from existing top coat products. It allows the wood to be sealed and filled completely prior to a finishing top coat. It provides a product which reduces grain raising, san...展开 SSAWB is a milky white additive allowing the formulator to create a sanding sealer from existing top coat products. It allows the wood to be sealed and filled completely prior to a finishing top coat. It provides a product which reduces grain raising, sands easily and is compatible with most water based topcoats. 收起 | |
| SWASW | PCI Group, Inc. | SWASW is a nonionic, clear liquid comprised of a fluoropolymer/silicone glycol polymer hybrid superspreader and a superwetting agent. It can be used in both solvent and waterborne systems. It is designed to significantly reduce surface tension, improve fl...展开 SWASW is a nonionic, clear liquid comprised of a fluoropolymer/silicone glycol polymer hybrid superspreader and a superwetting agent. It can be used in both solvent and waterborne systems. It is designed to significantly reduce surface tension, improve flow, leveling, surface appearance and overall performance by direct addition into coating and ink systems. 收起 | |
| TA-816 | PCI Group, Inc. | TA-816 is a reactive siloxane polymer blend which can produce a rough or textured appearance to paints and coatings. It can be used with lacquers, alkyd, epoxy, melamine phenolic, polyester and urethane systems. | |
| Talkron® CLASSIC | Provencale S.A. | Talkron® CLASSIC, in the form of a white powder, is a mix of talc and chlorite that has a lamellar structure. This product can be used in industrial, anti-corrosion, and decorative paints. It is indicated for systems where a low level of whiteness is re...展开 Talkron® CLASSIC, in the form of a white powder, is a mix of talc and chlorite that has a lamellar structure. This product can be used in industrial, anti-corrosion, and decorative paints. It is indicated for systems where a low level of whiteness is required, and its properties allow the user to regulate and adjust the gloss levels when required. 收起 |
