| 133 Resin | Guangzhou Baohui Resin Co., Ltd. | 133 Resin is a resin synthesized from chloride acetate and nitrocotton. This clear, transparent liquid has arrangement properties in electroplated silver, and provides toughness, corrosion resistance, strong viscosity, and plasticity to paints and photogr...展开 133 Resin is a resin synthesized from chloride acetate and nitrocotton. This clear, transparent liquid has arrangement properties in electroplated silver, and provides toughness, corrosion resistance, strong viscosity, and plasticity to paints and photogravure inks. 收起 | |
| 161A | Guangzhou Baohui Resin Co., Ltd. | 161A is a thermoplastic acrylic resin appearing as a clear, viscous liquid. It has alcohol resistance, wear resistance, harness and handfeel, and is capable of polyurethane and ultraviolet finishing. Functioning to make aluminum silver paste uniform on co...展开 161A is a thermoplastic acrylic resin appearing as a clear, viscous liquid. It has alcohol resistance, wear resistance, harness and handfeel, and is capable of polyurethane and ultraviolet finishing. Functioning to make aluminum silver paste uniform on coatings, 161A also provides an electroplated effect on coatings. 收起 | |
| 179A | Guangzhou Baohui Resin Co., Ltd. | 179A is a thermoplastic acrylic resin appearing as a clear, viscous liquid. It is resistant to high temperatures, does not yellow, and provides an electroplated effect through the use of silver paste. 179A is commonly used in the surface coating of automo...展开 179A is a thermoplastic acrylic resin appearing as a clear, viscous liquid. It is resistant to high temperatures, does not yellow, and provides an electroplated effect through the use of silver paste. 179A is commonly used in the surface coating of automobiles, motorcycles, and other metal products. 收起 | |
| 6400-7D | Guangzhou Baohui Resin Co., Ltd. | 6400-7D is an acrylic acid resin appearing as a clear, transparent liquid. It increases the strength of paint membranes based on various energies produced by UV conduction and solidification. 6400-7D is most commonly used to reduce the solidification of U...展开 6400-7D is an acrylic acid resin appearing as a clear, transparent liquid. It increases the strength of paint membranes based on various energies produced by UV conduction and solidification. 6400-7D is most commonly used to reduce the solidification of UV concentration in the presence of high energy and present cracking in thick membranes. 收起 | |
| 75-62S Acrylic Resin | Guangzhou Baohui Resin Co., Ltd. | 75-62S Acrylic Resin is a light-cured primer thermoplastic acrylic resin appearing as a clear, transparent liquid. Featuring compatibility with nitrocotton and cellulose acetate, 75-62S Acrylic Resin adheres to UV light-cured paint films to provide resist...展开 75-62S Acrylic Resin is a light-cured primer thermoplastic acrylic resin appearing as a clear, transparent liquid. Featuring compatibility with nitrocotton and cellulose acetate, 75-62S Acrylic Resin adheres to UV light-cured paint films to provide resistance to water boning and high temperatures when used with UV. 收起 | |
| 75-66S | Guangzhou Baohui Resin Co., Ltd. | 75-66S is a thermoplastic acrylic resin appearing as a clear, transparent liquid. Featuring intermiscibility with nitrocotton and butyl acetate fiber, it is used as an additive in self-drying acrylic resin paints. The basic paint film produced has gloss, ...展开 75-66S is a thermoplastic acrylic resin appearing as a clear, transparent liquid. Featuring intermiscibility with nitrocotton and butyl acetate fiber, it is used as an additive in self-drying acrylic resin paints. The basic paint film produced has gloss, adhesion, chemical resistance, and a silver powder arrangement effect. 62-66S also provides water, humidity, and heat resistance. 收起 | |
| BH-113 UV Resin | Guangzhou Baohui Resin Co., Ltd. | BH-113 UV Resin is a modified urethane acrylate of the middle functional group. This clear, transparent liquid can enhance the adhesion to metal and vacuum electroplating surface, improve the leveling status, and eliminate the spot and pinhole of coatings...展开 BH-113 UV Resin is a modified urethane acrylate of the middle functional group. This clear, transparent liquid can enhance the adhesion to metal and vacuum electroplating surface, improve the leveling status, and eliminate the spot and pinhole of coatings. BH-113 UV Resin enhances coating surface cleanness and humid packaging performance of pigments, and water boiling resistance of coatings. 收起 | |
| BH-1300 | Guangzhou Baohui Resin Co., Ltd. | BH-1300 is a modified resin synthesized from chloride acetate and nitrocotton. Appearing as a clear liquid, features include high toughness, corrosion resistance, strong viscosity, and high plasticity. BH-1300 finds application in paints for electrosilver...展开 BH-1300 is a modified resin synthesized from chloride acetate and nitrocotton. Appearing as a clear liquid, features include high toughness, corrosion resistance, strong viscosity, and high plasticity. BH-1300 finds application in paints for electrosilvering top coats, and photogravure inks. 收起 | |
| BH-2300 | Guangzhou Baohui Resin Co., Ltd. | BH-2300 is a modified acrylic resin appearing as a light yellow liquid. The surface of the paint membrane has photo mask effect, anti-alcohol, excellent laser carving effect and layer density. It can be used as UV primer and compatible to the anti-falling...展开 BH-2300 is a modified acrylic resin appearing as a light yellow liquid. The surface of the paint membrane has photo mask effect, anti-alcohol, excellent laser carving effect and layer density. It can be used as UV primer and compatible to the anti-falling auxiliary. BH-2300 is commonly used in the formulation of coatings requiring an electroplating effect. 收起 | |
| BH-233 | Guangzhou Baohui Resin Co., Ltd. | BH-233 is a mixture of modified acrylic acid resin and solvent appearing as a light yellow liquid. It provides a photo mask effect, laser carving effect, and layer density to the surface of paint membranes. BH-233 can be used as a UV primer and is suitabl...展开 BH-233 is a mixture of modified acrylic acid resin and solvent appearing as a light yellow liquid. It provides a photo mask effect, laser carving effect, and layer density to the surface of paint membranes. BH-233 can be used as a UV primer and is suitable for the formulation of electroplating effects in coatings. 收起 | |
| BH-533 | Guangzhou Baohui Resin Co., Ltd. | BH-533 is a dual-function PUA resin with weathering resistance and flexibility. This clear, transparent liquid has resistance to yellowing, and high and low temperature and thermal cycling performance. BH-533 finds application in UV plastic coatings. | |
| BH-6200-3G | Guangzhou Baohui Resin Co., Ltd. | BH-6200-3G is a polyurethane acrylic acid oligomer with comprehensive performance. This clear, transparent liquid provides leveling and waterproof properties, and RCA resistance. It is commonly applied to laptop UV, shells of mobile phones, and key-press ...展开 BH-6200-3G is a polyurethane acrylic acid oligomer with comprehensive performance. This clear, transparent liquid provides leveling and waterproof properties, and RCA resistance. It is commonly applied to laptop UV, shells of mobile phones, and key-press UV to overcome whitening, pinhole and sagging problems in thick coatings. 6200-3G finds application in NB UV plastic paint and mobile UV plastic paints. 收起 | |
| BH-66 UV Resin | Guangzhou Baohui Resin Co., Ltd. | BH-66 UV Resin is a modified polyester acrylate featuring UV radiation solidification performance. This clear, transparent liquid functions as a UV resin and enhances the light solidification speed rate in printing ink systems, reduces the consumption qua...展开 BH-66 UV Resin is a modified polyester acrylate featuring UV radiation solidification performance. This clear, transparent liquid functions as a UV resin and enhances the light solidification speed rate in printing ink systems, reduces the consumption quantity of the photo initiator, and enhances the proportion of formula middle pigment and filling. BH-66 has adhesion force, hardness, and bruise resistance performance. It can be used in bruise-resistant coating systems. 收起 | |
| BH-9002 | Guangzhou Baohui Resin Co., Ltd. | BH-9002 is a mirror silver resin appearing as a light yellow powder. Functions include strengthening adhesion, viscosity, rigidness, hardness, and chemical resistance. BH-9002 finds application in coatings requiring waterproof and anti-chemical properties...展开 BH-9002 is a mirror silver resin appearing as a light yellow powder. Functions include strengthening adhesion, viscosity, rigidness, hardness, and chemical resistance. BH-9002 finds application in coatings requiring waterproof and anti-chemical properties. 收起 | |
| BH368 | Guangzhou Baohui Resin Co., Ltd. | BH368 is an acrylic polyester resin appearing as a transparent liquid. This product does not yellow, provides flexibility, and finds application in varnish finishes of ultraviolet ray solidification and printing inks. | |
| BH382 | Guangzhou Baohui Resin Co., Ltd. | BH382 is a UV resin appearing as a transparent liquid. This product is commonly used for the preparation of ultraviolet solidification wood coatings of half matt, matt, or full matt. BH382 also finds application as varnish for UV curing and printing inks. | |
| Brominated Epoxy Oligomers | Hainan Zhongxin Chemical Co., Ltd. | Brominated Epoxy Oligomers (BEO) is a white to light yellow powder/granule which contains between 51-54% Bromine. It is primarily used as a flame retardant in PBT, PET, PTV, PC/ABS, ABS and HIPS high polymer alloys. It has a good melting rate with excelle...展开 Brominated Epoxy Oligomers (BEO) is a white to light yellow powder/granule which contains between 51-54% Bromine. It is primarily used as a flame retardant in PBT, PET, PTV, PC/ABS, ABS and HIPS high polymer alloys. It has a good melting rate with excellent thermal and light stability. 收起 | |
| Brominated Polystyrene | Hainan Zhongxin Chemical Co., Ltd. | Brominated Polystyrene (BPS) is a white granule powder with a bromine content of 68% or more. It is primarily used as a flame retardant in paints and plastics. Brominated Polystyrene is suitable for the production of polyester (PET, PBT, PCT) and daiamid(...展开 Brominated Polystyrene (BPS) is a white granule powder with a bromine content of 68% or more. It is primarily used as a flame retardant in paints and plastics. Brominated Polystyrene is suitable for the production of polyester (PET, PBT, PCT) and daiamid(nylon) ect. 收起 | |
| D.M.P. 30 | Synpol Products PVT. Ltd | D.M.P. 30 is a tertiary amine. This product has a viscosity of 2-5 cPs and a density of 0.9-1.0 g/cm3. D.M.P. 30 is most commonly used as a hardener in lamination and adhesive applications. | |
| DPHA-4056 | Guangzhou Baohui Resin Co., Ltd. | DPHA-4056 is a UV monomer appearing as a transparent, light yellow liquid. Featuring fast solidification, high hardness, bruise resistance, and low stimulation, DPHA-4056 finds application in coatings, printing inks, varnish paints, and adhesives. | |
| Electrosilvering Resin 9001 | Guangzhou Baohui Resin Co., Ltd. | Electrosilvering Resin 9001 is a mirror silver resin appearing as a white solid. It features high viscosity, anti-corrosion, and strong pasting and plasticity. Electrosilvering Resin 9001 is compatible in other coating resins and is dispersible in organic...展开 Electrosilvering Resin 9001 is a mirror silver resin appearing as a white solid. It features high viscosity, anti-corrosion, and strong pasting and plasticity. Electrosilvering Resin 9001 is compatible in other coating resins and is dispersible in organic pigments. It finds application in paints and photo printing inks. 收起 | |
| Epoxy Phenol B.G.E. | Synpol Products PVT. Ltd | Epoxy Phenol B.G.E. is a reactive diluent. This product has a density of 0.92-0.94 g/cm3. Epoxy Phenol B.G.E. is most commonly used in casting, encapsulation, and bonding applications. | |
| Epoxy Phenol CNSL | Synpol Products PVT. Ltd | Epoxy Phenol CNSL is a reactive diluent. This product has a density of 0.96-0.97 g/cm3. Epoxy Phenol CNSL is most commonly used in casting, encapsulation, and bonding applications. | |
| Epoxy Phenol P.G.E. | Synpol Products PVT. Ltd | Epoxy Phenol P.G.E. is a reactive diluent. This product has a density of 1.11-1.22 g/cm3. Epoxy Phenol P.G.E. is most commonly used in casting, encapsulation, and bonding applications. | |
| FR-52 Phenoxy-terminated Carbonate oligomer of tetrabromobisphenol A (TBBPA) | Hainan Zhongxin Chemical Co., Ltd. | FR-52 Phenoxy-terminated Carbonate oligomer of tetrabromobisphenol A (TBBPA) is a white powder that contains 52% Br Content. It is primarily used as a flame retardant additive in paints and plastics. FR-52 is recommended for use in: PBT, PET, PBT/PET blen...展开 FR-52 Phenoxy-terminated Carbonate oligomer of tetrabromobisphenol A (TBBPA) is a white powder that contains 52% Br Content. It is primarily used as a flame retardant additive in paints and plastics. FR-52 is recommended for use in: PBT, PET, PBT/PET blends, PC, ABS, ABS/PC blends, Polysulfone and SAN. 收起 | |
| FR-58 Phenoxy-Terminated Carbonate Oligomer of Tetrabromobisphenol A | Hainan Zhongxin Chemical Co., Ltd. | FR-58 Phenoxy-Terminated Carbonate Oligomer of Tetrabromobisphenol A, synonymous with Carbonicdichloride, polymerwith4,4-(1-methylethylidene)bis2, 6-dibromophenol, bis(2,4,6-tribromophenyl) ester, is a white powder with a bromine content of approximately ...展开 FR-58 Phenoxy-Terminated Carbonate Oligomer of Tetrabromobisphenol A, synonymous with Carbonicdichloride, polymerwith4,4-(1-methylethylidene)bis2, 6-dibromophenol, bis(2,4,6-tribromophenyl) ester, is a white powder with a bromine content of approximately 58%. It is primarily used as a flame retardant in paints and plastics. This product is recommended for use in PBT, PET, PBT/PET blends, PC, ABS, ABS/PC blends, Polysulfone and SAN. 收起 | |
| Hardeners 111 | Synpol Products PVT. Ltd | Hardeners 111 is an aliphatic polyamine. This product has a viscosity of 15-25 cPs and a density of 0.98-0.99 g/cm3. Hardeners 111 is most commonly used in adhesive and coal tar modified surface coating applications. | |
| Hardeners 222 | Synpol Products PVT. Ltd | Hardeners 222 is an aliphatic polyamine. This product has a viscosity of 7-10 cPs and a density of 0.95-0.96 g/cm3. Hardeners 222 is most commonly used in adhesive and coal tar modified surface coating applications. | |
| Hardeners 260 | Synpol Products PVT. Ltd | Hardeners 260 is a modified aliphatic polyamine. This product has a viscosity of 75-80 cPs and a density of 1.0-1.1 g/cm3. Hardeners 260 is most commonly used in solvent-free epoxy coating and lamination applications. | |
| Hardeners 280 | Synpol Products PVT. Ltd | Hardeners 280 is a modified aliphatic polyamine. This product has a viscosity of 20-30 cPs and a density of 1.14-1.16 g/cm3. Hardeners 280 is most commonly used as a hardener in coating applications. | |
| Hardeners 340 | Synpol Products PVT. Ltd | Hardeners 340 is a modified aromatic polyamine. This product has a viscosity of 150-210 cPs and a density of 1.13-1.14 g/cm3. Hardeners 340 is most commonly used as a hardener in concrete and underwater coating applications. | |
| Hardeners 345 | Synpol Products PVT. Ltd | Hardeners 345 is a modified aliphatic polyamine. This product has a viscosity of 6-9 cPs and a density of 1.10-1.12 g/cm3. Hardeners 345 is most commonly used as a hardener in concrete and underwater coating applications. | |
| Hardeners 350 | Synpol Products PVT. Ltd | Hardeners 350 is a modified aliphatic polyamine. This product has a viscosity of 150-210 cPs and a density of 1.13-1.14 g/cm3. Hardeners 350 is most commonly used as a hardener in concrete and underwater coating applications. | |
| Hardeners 444 | Synpol Products PVT. Ltd | Hardeners 444 is an aliphatic amine epoxy adduct. This product has a viscosity of 2-4 cPs and a density of 0.95-0.96 g/cm3. Hardeners 444 is most commonly used in chemical and solvent-resistant coating applications. | |
| Hardeners 473 | Synpol Products PVT. Ltd | Hardeners 473 is a polyamine epoxy adduct. This product has a viscosity of 30-60 cPs and a density of 1.07-1.09 g/cm3. Hardeners 473 is most commonly used as a hardener in solvent-free epoxy coating applications. | |
| Hardeners 473 | Synpol Products PVT. Ltd | Hardeners 473 is an aliphatic amine adduct. This product has a viscosity of 100-140 cPs and a density of 1.10-1.12 g/cm3. Hardeners 473 is most commonly used in fast-setting adhesive applications. | |
| Hardeners 620 | Synpol Products PVT. Ltd | Hardeners 620 is a cycloaliphatic amine epoxy adduct. This product has a viscosity of 3-5 cPs and a density of 1.02-1.03 g/cm3. Hardeners 620 is most commonly used in flooring adhesive applications. | |
| Hardeners 640 | Synpol Products PVT. Ltd | Hardeners 640 is a phenyl alkamine. This product has a viscosity of 20-40 cPs and a density of 0.98-1.0 g/cm3. Hardeners 640 is most commonly used in solvent-free and high-solids epoxy coating applications. | |
| High-Bright PU C701 | Guangzhou Baohui Resin Co., Ltd. | High-Bright PU C701 is a wear-resistant polyurethane resin. It enhances the luster and richness in polyurethane, has wettability with pigments, and is compatible with hydroxyl acrylic acid. This product is commonly applied to high-grade polyurethane coati...展开 High-Bright PU C701 is a wear-resistant polyurethane resin. It enhances the luster and richness in polyurethane, has wettability with pigments, and is compatible with hydroxyl acrylic acid. This product is commonly applied to high-grade polyurethane coatings. 收起 | |
| Hydroxyl Acrylic Resin BH655 | Guangzhou Baohui Resin Co., Ltd. | Hydroxyl Acrylic Resin BH655 is a water-resistant polyurethane resin. It improves the arrangement of aluminum powder, compatibility to cellulose acetate-butyrate and alcohol resistance, and wearing and solvent resistance. This product is commonly used in...展开 Hydroxyl Acrylic Resin BH655 is a water-resistant polyurethane resin. It improves the arrangement of aluminum powder, compatibility to cellulose acetate-butyrate and alcohol resistance, and wearing and solvent resistance. This product is commonly used in coatings and aluminum powder paints. 收起 | |
| K-636 | Guangzhou Baohui Resin Co., Ltd. | K-636 is an aliphatic, tetra-functional polyurethane resin appearing as a clear liquid. This product provides adhesion, and is commonly used in UV vacuum plating primers. | |
| KF-666 | Guangzhou Baohui Resin Co., Ltd. | KF-666 is a polyurethane acrylate resin appearing as a clear liquid. It features high curing speed and hardness, and solvent resistance. KF-666 finds application in vacuum electroplating finishes and polished finishes with high adhesion requirements. | |
| KLX 7997 | Nokxeller Quimica Ltda | KLX 7997 is a versatile polyether based aromatic isocyanate anionic dispersion for high tack formulations. It has a very soft and flexible film that can be used as a high initial and final bond strength and heat resistance. Typical applications are for mo...展开 KLX 7997 is a versatile polyether based aromatic isocyanate anionic dispersion for high tack formulations. It has a very soft and flexible film that can be used as a high initial and final bond strength and heat resistance. Typical applications are for modifying pressure sensitive textile & construction adhesives, neoprene, EVA and other plastic & leather primer applications. Once crosslinked shows outstanding water resistance. 收起 | |
| Maleic Anhydride | Hainan Zhongxin Chemical Co., Ltd. | Maleic anhydride is an important organic chemical and raw material. It is primarily used to make unsaturated polyester resins and paints and paper products. It has additional uses as a treatment agent for artificial leather and marble. | |
| NKX 144 | Nokxeller Quimica Ltda | NKX 144 is a small particle size high gloss PU polyesther aliphatic topcoat. It forms a transparent film of medium hardness suitable as a final varnish or topcoat where high gloss, abrasion resistance and clarity are required. When crosslinked, presents e...展开 NKX 144 is a small particle size high gloss PU polyesther aliphatic topcoat. It forms a transparent film of medium hardness suitable as a final varnish or topcoat where high gloss, abrasion resistance and clarity are required. When crosslinked, presents excellent weatherability. It is ideal for use as a topcoat for leather finish and PVC, indoor paints formulation, etc. 收起 | |
| NKX 176 | Nokxeller Quimica Ltda | NKX 176 is a soft and elastic PUD with outstanding film-forming properties. NKX 176 is a NON IONIC VOC free soft non tacky and elastic PUD with outstanding film-forming properties. It can be used as a universal coating resin for textile due to its varied ...展开 NKX 176 is a soft and elastic PUD with outstanding film-forming properties. NKX 176 is a NON IONIC VOC free soft non tacky and elastic PUD with outstanding film-forming properties. It can be used as a universal coating resin for textile due to its varied possibility of uses. NKX 176 has a flexible and soft but non-tacky handle. It has varied applications especially in textile finishes where body handle, durability are required. It is ideal for use as a print binder and as an universal coating resin in textile applications, garment leather finish, and coatings for digital printing in fabrics. 收起 | |
| NKX 183 | Nokxeller Quimica Ltda | NKX 180 based resin, with higher concentration.Multipurpose resin of extreme adhesion, outstanding toughness and abrasion resistance suitable for coatings for the following substrates: plastic, synthetic fabric, metal, shoe finish, etc. Due to its high cr...展开 NKX 180 based resin, with higher concentration.Multipurpose resin of extreme adhesion, outstanding toughness and abrasion resistance suitable for coatings for the following substrates: plastic, synthetic fabric, metal, shoe finish, etc. Due to its high crystalline segment concentration the polymer presents itself tough, yet flexible and resistant. 收起 | |
| NKX 201 NMP-Free | Nokxeller Quimica Ltda | NKX 201 NMP-Free shows excellent chemical, weathering and abrasion resistance due to higher resistance of this kind of polyol. NKX 201 presents wide use possibilities considering its high gloss and transparency properties as in synthetic substrates, as hi...展开 NKX 201 NMP-Free shows excellent chemical, weathering and abrasion resistance due to higher resistance of this kind of polyol. NKX 201 presents wide use possibilities considering its high gloss and transparency properties as in synthetic substrates, as high gloss topcoats in leather finish, wood flooring or print screen putties, metallic applications. 收起 | |
| NKX 240 | Nokxeller Quimica Ltda | NKX 240 is a multipurpose resin of exceptional properties was developed to serve a wide range of applications for flexible and rigid substrates. NKX 240 shows up a clear film with good gloss retention and presents high adhesion and heat resistance. | |
| NKX 245 | Nokxeller Quimica Ltda | NKX-245 is a modified polyester type suitable for glossy aqueous coatings as wood flooring. NKX 245 has a very hard film providing high abrasion resistance, and adhesion and can be easily formulated along with other components such as acrylic resins, pigm...展开 NKX-245 is a modified polyester type suitable for glossy aqueous coatings as wood flooring. NKX 245 has a very hard film providing high abrasion resistance, and adhesion and can be easily formulated along with other components such as acrylic resins, pigment dispersions, fillers, thickeners, etc. 收起 | |
| NKX 250 | Nokxeller Quimica Ltda | NKX-250 is a very hard PUD polyester type adequate for clear or pigmented waterbased topcoat for rigid substrates specially furniture, metal or hard synthetic substrates. Its hard, transparent and glossy film provides good abrasion resistance, adhesion an...展开 NKX-250 is a very hard PUD polyester type adequate for clear or pigmented waterbased topcoat for rigid substrates specially furniture, metal or hard synthetic substrates. Its hard, transparent and glossy film provides good abrasion resistance, adhesion and gloss. 收起 | |
| NKX 274 | Nokxeller Quimica Ltda | NKX 274 is a high solid small particle size resin with excellent chemical resistance. It is adequate for varied market segments wherever is necessary to replace a solventborne for a waterborne paint. Typical uses in metal, soles, PVC, other synthetic subs...展开 NKX 274 is a high solid small particle size resin with excellent chemical resistance. It is adequate for varied market segments wherever is necessary to replace a solventborne for a waterborne paint. Typical uses in metal, soles, PVC, other synthetic substrate paint compositions wherever high gloss, good adhesions and chemical resistance are necessary. 收起 | |
| NKX 279 | Nokxeller Quimica Ltda | NKX 279 is a fine particle size resin and developed to formulate water topcoats of high adhesion and very good chemical resistance. Typical end use applications include top coatings for rigid and flexible substrates including wood, paper, metallic surface...展开 NKX 279 is a fine particle size resin and developed to formulate water topcoats of high adhesion and very good chemical resistance. Typical end use applications include top coatings for rigid and flexible substrates including wood, paper, metallic surface , plastics and especially PVC and other synthetic laminates.NKX 279 is high performance water based coating and can replace traditional solvent based coatings in wide applications possibilities. 收起 | |
| P-Phenylenediamine (PPD) | Hainan Zhongxin Chemical Co., Ltd. | P-Phenylenediamine (PPD) can be either a white powder, flake or lump with a molecular formula of C6H8N2 and is between 99.5 - 99.9% pure. It is primarily used as a component of engineering polymers and aramid fibers. P-Phenylenediamine (PPD) can also be u...展开 P-Phenylenediamine (PPD) can be either a white powder, flake or lump with a molecular formula of C6H8N2 and is between 99.5 - 99.9% pure. It is primarily used as a component of engineering polymers and aramid fibers. P-Phenylenediamine (PPD) can also be used in the production of hair dyes, rubber chemicals, textile dyes, pigments, and photographic developing chemicals. 收起 | |
| Pentaerythritol | Hainan Zhongxin Chemical Co., Ltd. | Pentaerythritol is synonymous with 2,2-Bis(hydroxymethyl) 1,3-propanediol;Tetrakis(hydroxymethyl)methane and contains 95% Monopentaerythritol. It is primarily used as an additive for short, medium and long oil alkyd resins for the production of inks and p...展开 Pentaerythritol is synonymous with 2,2-Bis(hydroxymethyl) 1,3-propanediol;Tetrakis(hydroxymethyl)methane and contains 95% Monopentaerythritol. It is primarily used as an additive for short, medium and long oil alkyd resins for the production of inks and paints. 收起 | |
| Petroleum Resin (C9 series) | Hainan Zhongxin Chemical Co., Ltd. | Petroleum Resin (C9 series) is a light yellow granular petroleum hydrocarbon resin for use in making road-marking paints. It also has applications as an additive in the production of rubber and printing inks for similar industries. | |
| PT-388 | Guangzhou Baohui Resin Co., Ltd. | PT-388 is a saturated polyester resin appearing as a clear liquid. It provides improved feel and elasticity without the addition of elastic powder, and is chemical and wear resistant. PT-388 finds application in elastic and villi paints. | |
| PT-466 | Guangzhou Baohui Resin Co., Ltd. | PT-466 is an elastic polyester resin appearing as a clear liquid. It provides bruise, wearing, solvent, and solution resistance. This product is commonly used in elastic and villi paints. | |
| PT-488 | Guangzhou Baohui Resin Co., Ltd. | PT-488 is a saturated polyester resin with special branch modification. Appearing as a clear liquid, it provides wearing, bruise, solvent, and solution resistance. It provides improved feel without the addition of elastic powder, and contains a general is...展开 PT-488 is a saturated polyester resin with special branch modification. Appearing as a clear liquid, it provides wearing, bruise, solvent, and solution resistance. It provides improved feel without the addition of elastic powder, and contains a general isocyanate curing agent. PT-488 finds application in elastic and villi paints. 收起 | |
| PT-558 | Guangzhou Baohui Resin Co., Ltd. | PT-558 is an elastic modified polyester resin appearing as a clear liquid. It has weather resistant and anti-pasting properties, and finds application in elastic and villi paints and coatings. | |
| PT-614 | Guangzhou Baohui Resin Co., Ltd. | PT-614 is a tohexanedionic polyester polyol appearing as a clear liquid. This product has bruise and scratch resistance, and is commonly used in elastic and villi paints. | |
| PVP-K12 | Shanghai WellTone Material Technology Co., Ltd. | PVP-K12 is a homopolymer of vinylpyrrolidone in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 10-13 and a total solids content of 39-41%. PVP-K12 is most commonly used as a suspending, dispersing, and emuls...展开 PVP-K12 is a homopolymer of vinylpyrrolidone in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 10-13 and a total solids content of 39-41%. PVP-K12 is most commonly used as a suspending, dispersing, and emulsifying agent in paint, coating, adhesive, ink, and textile dyeing and printing applications. 收起 | |
| PVP-K120 | Shanghai WellTone Material Technology Co., Ltd. | PVP-K120 is a homopolymer of vinylpyrrolidone in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 110-125 and a total solids content of 14-16%. PVP-K120 is most commonly used as a suspending, dispersing, and e...展开 PVP-K120 is a homopolymer of vinylpyrrolidone in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 110-125 and a total solids content of 14-16%. PVP-K120 is most commonly used as a suspending, dispersing, and emulsifying agent in paint, coating, adhesive, ink, and textile dyeing and printing applications. 收起 | |
| PVP-K15 | Shanghai WellTone Material Technology Co., Ltd. | PVP-K15 is a homopolymer of vinylpyrrolidone in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 13-17 and a total solids content of 39-41%. PVP-K15 is most commonly used as a suspending, dispersing, and emuls...展开 PVP-K15 is a homopolymer of vinylpyrrolidone in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 13-17 and a total solids content of 39-41%. PVP-K15 is most commonly used as a suspending, dispersing, and emulsifying agent in paint, coating, adhesive, ink, and textile dyeing and printing applications. 收起 | |
| PVP-K15 | Shanghai WellTone Material Technology Co., Ltd. | PVP-K15 is a homopolymer of vinylpyrrolidone in a white to milky white-colored powder form. This product has a K value of 13-18 and a total solids content of greater than 95%. PVP-K15 is most commonly used as a suspending, dispersing, and emulsifying ag...展开 PVP-K15 is a homopolymer of vinylpyrrolidone in a white to milky white-colored powder form. This product has a K value of 13-18 and a total solids content of greater than 95%. PVP-K15 is most commonly used as a suspending, dispersing, and emulsifying agent in paint, coating, adhesive, ink, and textile dyeing and printing applications. 收起 | |
| PVP-K17 | Shanghai WellTone Material Technology Co., Ltd. | PVP-K17 is a homopolymer of vinylpyrrolidone in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 15-19 and a total solids content of 39-41%. PVP-K17 is most commonly used as a suspending, dispersing, and emuls...展开 PVP-K17 is a homopolymer of vinylpyrrolidone in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 15-19 and a total solids content of 39-41%. PVP-K17 is most commonly used as a suspending, dispersing, and emulsifying agent in paint, coating, adhesive, ink, and textile dyeing and printing applications. 收起 | |
| PVP-K17 | Shanghai WellTone Material Technology Co., Ltd. | PVP-K17 is a homopolymer of vinylpyrrolidone in a white to milky white-colored powder form. This product has a K value of 15-19 and a total solids content of greater than 95%. PVP-K17 is most commonly used as a suspending, dispersing, and emulsifying ag...展开 PVP-K17 is a homopolymer of vinylpyrrolidone in a white to milky white-colored powder form. This product has a K value of 15-19 and a total solids content of greater than 95%. PVP-K17 is most commonly used as a suspending, dispersing, and emulsifying agent in paint, coating, adhesive, ink, and textile dyeing and printing applications. 收起 | |
| PVP-K25 | Shanghai WellTone Material Technology Co., Ltd. | PVP-K25 is a homopolymer of vinylpyrrolidone in a white to milky white-colored powder form. This product has a K value of 22-28 and a total solids content of greater than 95%. PVP-K25 is most commonly used as a suspending, dispersing, and emulsifying ag...展开 PVP-K25 is a homopolymer of vinylpyrrolidone in a white to milky white-colored powder form. This product has a K value of 22-28 and a total solids content of greater than 95%. PVP-K25 is most commonly used as a suspending, dispersing, and emulsifying agent in paint, coating, adhesive, ink, and textile dyeing and printing applications. 收起 | |
| PVP-K30 | Shanghai WellTone Material Technology Co., Ltd. | PVP-K30 is a homopolymer of vinylpyrrolidone in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 27-33 and a total solids content of 29-31%. PVP-K30 is most commonly used as a suspending, dispersing, and emuls...展开 PVP-K30 is a homopolymer of vinylpyrrolidone in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 27-33 and a total solids content of 29-31%. PVP-K30 is most commonly used as a suspending, dispersing, and emulsifying agent in paint, coating, adhesive, ink, and textile dyeing and printing applications. 收起 | |
| PVP-K30 | Shanghai WellTone Material Technology Co., Ltd. | PVP-K30 is a homopolymer of vinylpyrrolidone in a white to milky white-colored powder form. This product has a K value of 27-33 and a total solids content of greater than 95%. PVP-K30 is most commonly used as a suspending, dispersing, and emulsifying ag...展开 PVP-K30 is a homopolymer of vinylpyrrolidone in a white to milky white-colored powder form. This product has a K value of 27-33 and a total solids content of greater than 95%. PVP-K30 is most commonly used as a suspending, dispersing, and emulsifying agent in paint, coating, adhesive, ink, and textile dyeing and printing applications. 收起 | |
| PVP-K60 | Shanghai WellTone Material Technology Co., Ltd. | PVP-K60 is a homopolymer of vinylpyrrolidone in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 52-62 and a total solids content of 38-42%. PVP-K60 is most commonly used as a suspending, dispersing, and emuls...展开 PVP-K60 is a homopolymer of vinylpyrrolidone in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 52-62 and a total solids content of 38-42%. PVP-K60 is most commonly used as a suspending, dispersing, and emulsifying agent in paint, coating, adhesive, ink, and textile dyeing and printing applications. 收起 | |
| PVP-K90 | Shanghai WellTone Material Technology Co., Ltd. | PVP-K90 is a homopolymer of vinylpyrrolidone in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 81-97 and a total solids content of 19-21%. PVP-K90 is most commonly used as a suspending, dispersing, and emuls...展开 PVP-K90 is a homopolymer of vinylpyrrolidone in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 81-97 and a total solids content of 19-21%. PVP-K90 is most commonly used as a suspending, dispersing, and emulsifying agent in paint, coating, adhesive, ink, and textile dyeing and printing applications. 收起 | |
| PVP-K90 | Shanghai WellTone Material Technology Co., Ltd. | PVP-K90 is a homopolymer of vinylpyrrolidone in a white to milky white-colored powder form. This product has a K value of 81-94 and a total solids content of greater than 95%. PVP-K90 is most commonly used as a suspending, dispersing, and emulsifying ag...展开 PVP-K90 is a homopolymer of vinylpyrrolidone in a white to milky white-colored powder form. This product has a K value of 81-94 and a total solids content of greater than 95%. PVP-K90 is most commonly used as a suspending, dispersing, and emulsifying agent in paint, coating, adhesive, ink, and textile dyeing and printing applications. 收起 | |
| PVP/VA28W | Shanghai WellTone Material Technology Co., Ltd. | PVP/VA28W is a copolymer of vinylpyrrolidone and vinylacetate in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 16-22 and a total solids content of 48-52%. PVP/VA28W is most commonly used as a binder and vis...展开 PVP/VA28W is a copolymer of vinylpyrrolidone and vinylacetate in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 16-22 and a total solids content of 48-52%. PVP/VA28W is most commonly used as a binder and viscosity-enhancing agent in paper adhesive, coating, and printing ink applications. 收起 | |
| PVP/VA37E | Shanghai WellTone Material Technology Co., Ltd. | PVP/VA37E is a copolymer of vinylpyrrolidone and vinylacetate in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 24-32 and a total solids content of 48-52%. PVP/VA37E is most commonly used as a binder and vis...展开 PVP/VA37E is a copolymer of vinylpyrrolidone and vinylacetate in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 24-32 and a total solids content of 48-52%. PVP/VA37E is most commonly used as a binder and viscosity-enhancing agent in paper adhesive, coating, and printing ink applications. 收起 | |
| PVP/VA55E | Shanghai WellTone Material Technology Co., Ltd. | PVP/VA55E is a copolymer of vinylpyrrolidone and vinylacetate in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 24-32, a moisture content of less than 0.5%, and a total solids content of 48-52%. PVP/VA55E is...展开 PVP/VA55E is a copolymer of vinylpyrrolidone and vinylacetate in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 24-32, a moisture content of less than 0.5%, and a total solids content of 48-52%. PVP/VA55E is most commonly used as a binder and viscosity-enhancing agent in paper adhesive, coating, and printing ink applications. 收起 | |
| PVP/VA55W | Shanghai WellTone Material Technology Co., Ltd. | PVP/VA55W is a copolymer of vinylpyrrolidone and vinylacetate in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 22-30 and a total solids content of 48-52%. PVP/VA55W is most commonly used as a binder and vis...展开 PVP/VA55W is a copolymer of vinylpyrrolidone and vinylacetate in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 22-30 and a total solids content of 48-52%. PVP/VA55W is most commonly used as a binder and viscosity-enhancing agent in paper adhesive, coating, and printing ink applications. 收起 | |
| PVP/VA73E | Shanghai WellTone Material Technology Co., Ltd. | PVP/VA73E is a copolymer of vinylpyrrolidone and vinylacetate in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 30-38 and a total solids content of 48-52%. PVP/VA73E is most commonly used as a binder and vis...展开 PVP/VA73E is a copolymer of vinylpyrrolidone and vinylacetate in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 30-38 and a total solids content of 48-52%. PVP/VA73E is most commonly used as a binder and viscosity-enhancing agent in paper adhesive, coating, and printing ink applications. 收起 | |
| PVP/VA73W | Shanghai WellTone Material Technology Co., Ltd. | PVP/VA73W is a copolymer of vinylpyrrolidone and vinylacetate in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 24-32 and a total solids content of 48-52%. PVP/VA73W is most commonly used as a binder and vis...展开 PVP/VA73W is a copolymer of vinylpyrrolidone and vinylacetate in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 24-32 and a total solids content of 48-52%. PVP/VA73W is most commonly used as a binder and viscosity-enhancing agent in paper adhesive, coating, and printing ink applications. 收起 | |
| PVP/VA84E | Shanghai WellTone Material Technology Co., Ltd. | PVP/VA84E is a copolymer of vinylpyrrolidone and vinylacetate in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 30-36, a moisture content of less than 0.5%, and a total solids content of 48-52%. PVP/VA84E is...展开 PVP/VA84E is a copolymer of vinylpyrrolidone and vinylacetate in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 30-36, a moisture content of less than 0.5%, and a total solids content of 48-52%. PVP/VA84E is most commonly used as a binder and viscosity-enhancing agent in paper adhesive, coating, and printing ink applications. 收起 | |
| PVP/VA84S | Shanghai WellTone Material Technology Co., Ltd. | PVP/VA84S is a copolymer of vinylpyrrolidone and vinylacetate in a white to milky white powder form. This product has a K value of 30-36 and a total solids content of greater than 95%. PVP/VA84S is most commonly used as a binder and viscosity-enhancing ...展开 PVP/VA84S is a copolymer of vinylpyrrolidone and vinylacetate in a white to milky white powder form. This product has a K value of 30-36 and a total solids content of greater than 95%. PVP/VA84S is most commonly used as a binder and viscosity-enhancing agent in paper adhesive, coating, and printing ink applications. 收起 | |
| PVP/VA84W | Shanghai WellTone Material Technology Co., Ltd. | PVP/VA84W is a copolymer of vinylpyrrolidone and vinylacetate in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 30-36 and a total solids content of 48-52%. PVP/VA84W is most commonly used as a binder and vis...展开 PVP/VA84W is a copolymer of vinylpyrrolidone and vinylacetate in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 30-36 and a total solids content of 48-52%. PVP/VA84W is most commonly used as a binder and viscosity-enhancing agent in paper adhesive, coating, and printing ink applications. 收起 | |
| Synpol 1001 | Synpol Products PVT. Ltd | Synpol 1001 is a butylated UF amino resin. This product has a non-volatile compound content of 63-67% and a density at 25°C of 1.03-1.05 g/cm3. Synpol 1001 is most commonly used in general purpose baking enamel applications. | |
| Synpol 105X | Synpol Products PVT. Ltd | Synpol 105X is a reactive polyamide resin. This product has a density at 25°C of 0.96-0.98 g/cm3 and a non-volatile compound content of 58-62%. Synpol 105X is most commonly used as a hardener in solvent-based epoxy coating applications. | |
| Synpol 115 | Synpol Products PVT. Ltd | Synpol 115 is a reactive polyamide resin. This product has a density at 25°C of 0.97-0.98 g/cm3. Synpol 115 is most commonly used as a hardener in protective and decorative coating applications. | |
| Synpol 115 (70% in Xylene) | Synpol Products PVT. Ltd | Synpol 115 (70% in Xylene) is a reactive polyamide resin. This product has a density at 25°C of 0.94-0.95 g/cm3 and a non-volatile compound content of 68-72%. Synpol 115 (70% in Xylene) is most commonly used as a hardener in protective and decorative coa...展开 Synpol 115 (70% in Xylene) is a reactive polyamide resin. This product has a density at 25°C of 0.94-0.95 g/cm3 and a non-volatile compound content of 68-72%. Synpol 115 (70% in Xylene) is most commonly used as a hardener in protective and decorative coating applications. 收起 | |
| Synpol 130 | Synpol Products PVT. Ltd | Synpol 130 is a reactive polyamide resin. This product has a density at 25°C of 1.03-1.04 g/cm3 and a non-volatile compound content of 68-72%. Synpol 130 is most commonly used as a hardener in water-emulsifiable epoxy coating applications. | |
| Synpol 140 | Synpol Products PVT. Ltd | Synpol 140 is a reactive polyamide resin. This product has a density at 25°C of 0.96-0.98 g/cm3. Synpol 140 is most commonly used as a hardener in solvent-free coating, adhesive, and lamination applications. | |
| Synpol 150 | Synpol Products PVT. Ltd | Synpol 150 is a reactive polyamide resin. This product has a density at 25°C of 0.975-0.985 g/cm3. Synpol 150 is most commonly used as a hardener in solvent-free coating, adhesive, and lamination applications. | |
| Synpol 160 | Synpol Products PVT. Ltd | Synpol 160 is a reactive polyamide resin. This product has a density at 25°C of 0.94-0.96 g/cm3. Synpol 160 is most commonly used as a hardener in solvent-free coating, adhesive, and lamination applications. | |
| Synpol 160 LP | Synpol Products PVT. Ltd | Synpol 160 LP is a reactive polyamide resin. This product has a density at 25°C of 0.92-0.94 g/cm3. Synpol 160 LP is most commonly used as a hardener in solvent-free coating applications. | |
| Synpol 200 | Synpol Products PVT. Ltd | Synpol 200 is a bisphenol A-based, unmodified epoxy resin. This product has a viscosity at 25°C of 120-160 Poises. Synpol 200 is most commonly used in coating, lamination, and adhesive applications. | |
| Synpol 2080 | Synpol Products PVT. Ltd | Synpol 2080 is a coconut fatty acid-modified epoxy ester. This product has a density of 0.97-0.98 g/cm3. Synpol 2080 is most commonly used in clear and pigmented electronic and appliance finish applications. | |
| Synpol 210 | Synpol Products PVT. Ltd | Synpol 210 is a bisphenol A-based, unmodified reactive diluent. This product has a viscosity at 25°C of 180-210 Poises. Synpol 210 is most commonly used in coating, lamination, and adhesive applications. | |
| Synpol 220 | Synpol Products PVT. Ltd | Synpol 220 is a bisphenol A-based, unmodified reactive diluent. This product has a viscosity at 25°C of 180-200 Poises. Synpol 220 is most commonly used in coating, lamination, and adhesive applications. | |
| Synpol 280 | Synpol Products PVT. Ltd | Synpol 280 is a bisphenol A-based, unmodified epoxy resin. This product has a density of 1.18-1.19 g/cm3. Synpol 280 is most commonly used in high-solids coating, adhesive, and lamination applications. | |
| Synpol 450XX | Synpol Products PVT. Ltd | Synpol 450XX is a bisphenol A-based, unmodified epoxy resin. This product has a density of 1.07-1.09 g/cm3. Synpol 450XX is most commonly used in chemical-resistant, air-dry, and bake coating applications. | |
| Synpol 5545 | Synpol Products PVT. Ltd | Synpol 5545 is a linseed fatty acid-modified epoxy ester. This product has a density of 0.92-0.93 g/cm3. Synpol 5545 is most commonly used in air-drying maintenance finish applications. | |
| Synpol 6040 | Synpol Products PVT. Ltd | Synpol 6040 is a soya fatty acid-modified epoxy ester. This product has a density of 0.96-0.97 g/cm3. Synpol 6040 is most commonly used in clear and pigmented electronic and appliance finish applications. | |
| Synpol 900 | Synpol Products PVT. Ltd | Synpol 900 is a bisphenol A-based, unmodified epoxy resin. This product has a density of 1.18-1.19 g/cm3 and a melting point 95-105ºC. Synpol 900 is most commonly used in air-dry and bake finish, as well as powder coating applications. |
