| ATP-1S | Keeneyes International Co., Ltd. | ATP-1S is modified aluminum tripolyphosphate. It has excellent anti-corrosive benefits and high efficiency. It also offers good adhesive force, impact resilience, and wide adaptability. This product is recommended for solvent-based paints. | |
| ATP-1W | Keeneyes International Co., Ltd. | ATP-1W is modified aluminum tripolyphosphate. It has excellent anti-corrosive benefits and high efficiency. It also offers good adhesive force, impact resilience, and wide adaptability. This product is recommended for water-soluble paints. | |
| ATP-PSW | Keeneyes International Co., Ltd. | ATP-PSW is pure aluminum tripolyphosphate. It has excellent anti-corrosive benefits and high efficiency. It also offers good adhesive force, impact resilience, and wide adaptability. This product is recommended for fire retardant coatings, heat-resistant ...展开 ATP-PSW is pure aluminum tripolyphosphate. It has excellent anti-corrosive benefits and high efficiency. It also offers good adhesive force, impact resilience, and wide adaptability. This product is recommended for fire retardant coatings, heat-resistant coatings, and anti-corrosion coatings. 收起 | |
| ATP-TSW | Keeneyes International Co., Ltd. | ATP-TSW is modified aluminum tripolyphosphate. It has excellent anti-corrosive benefits and high efficiency. It also offers good adhesive force, impact resilience, and wide adaptability. This product is recommended for high grade solvent-based and water-s...展开 ATP-TSW is modified aluminum tripolyphosphate. It has excellent anti-corrosive benefits and high efficiency. It also offers good adhesive force, impact resilience, and wide adaptability. This product is recommended for high grade solvent-based and water-soluble paints. 收起 | |
| Butyl glycolate (BG) | Keeneyes International Co., Ltd. | Butyl glycolate (BG) is a colorless liquid with a very faint, ester-like odor. The product is miscible with the common organic solvents but only partially miscible with water. With respect to the thermal stability of BG as a "2-hydroxy ester," reactions s...展开 Butyl glycolate (BG) is a colorless liquid with a very faint, ester-like odor. The product is miscible with the common organic solvents but only partially miscible with water. With respect to the thermal stability of BG as a "2-hydroxy ester," reactions such as glycolide formation, transesterification, saponification and etherification occur at elevated temperatures, especially at the boiling point, creating an upwards extension of the boiling point range. 收起 | |
| DETDA E-100 | Keeneyes International Co., Ltd. | DETDA E-100 (Diethyl Toluene Diamine) is supplied as a light yellow transparent liquid. It is a good chain extender of PU elastomer, especially for RIM and SPUA. It is also used as a curing agent of polyurethane and epoxy resin, as an antioxidant in epoxy...展开 DETDA E-100 (Diethyl Toluene Diamine) is supplied as a light yellow transparent liquid. It is a good chain extender of PU elastomer, especially for RIM and SPUA. It is also used as a curing agent of polyurethane and epoxy resin, as an antioxidant in epoxy resins, in industrial oils, and lubricants. In addition, it can be used as an organic synthesis intermediate. 收起 | |
| D.M.P. 30 | Synpol Products PVT. Ltd | D.M.P. 30 is a tertiary amine. This product has a viscosity of 2-5 cPs and a density of 0.9-1.0 g/cm3. D.M.P. 30 is most commonly used as a hardener in lamination and adhesive applications. | |
| DMTDA E-300 | Keeneyes International Co., Ltd. | DMTDA E-300 (Dimethyl Thio-Toluene Diamine is supplied as a light yellow transparent liquid. It is a new-model polyurethane elastomer curing cross-linking agent. It has two kinds of isomers, a mixture of 2,4- and 2,6-DMTDA (proportion is about 77~80/17~20...展开 DMTDA E-300 (Dimethyl Thio-Toluene Diamine is supplied as a light yellow transparent liquid. It is a new-model polyurethane elastomer curing cross-linking agent. It has two kinds of isomers, a mixture of 2,4- and 2,6-DMTDA (proportion is about 77~80/17~20). Compared with common MOCA, it is lower-viscosity liquid at normal temperature, it has features such as low temperature operations and low dosage. 收起 | |
| Epoxy Phenol B.G.E. | Synpol Products PVT. Ltd | Epoxy Phenol B.G.E. is a reactive diluent. This product has a density of 0.92-0.94 g/cm3. Epoxy Phenol B.G.E. is most commonly used in casting, encapsulation, and bonding applications. | |
| Epoxy Phenol CNSL | Synpol Products PVT. Ltd | Epoxy Phenol CNSL is a reactive diluent. This product has a density of 0.96-0.97 g/cm3. Epoxy Phenol CNSL is most commonly used in casting, encapsulation, and bonding applications. | |
| Epoxy Phenol P.G.E. | Synpol Products PVT. Ltd | Epoxy Phenol P.G.E. is a reactive diluent. This product has a density of 1.11-1.22 g/cm3. Epoxy Phenol P.G.E. is most commonly used in casting, encapsulation, and bonding applications. | |
| ExBar™ 200 | Excalibar Minerals LLC | ExBar™ 200 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 15.0u and an oil absorption of 9. | |
| ExBar™ 325 | Excalibar Minerals LLC | ExBar™ 325 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 10.0u and an oil absorption of 10. | |
| ExBar™ 400 | Excalibar Minerals LLC | ExBar™ 400 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 8.0u and an oil absorption of 12. | |
| ExBar™ W 1 | Excalibar Minerals LLC | ExBar™ W 1 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 1 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 1u and an oil absorption of 15. 收起 | |
| ExBar™ W 2 | Excalibar Minerals LLC | ExBar™ W 2 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 2 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 2u and an oil absorption of 13. 收起 | |
| ExBar™ W 3 | Excalibar Minerals LLC | ExBar™ W 3 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 3 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 3u and an oil absorption of 13. 收起 | |
| ExBar™ W 325 | Excalibar Minerals LLC | ExBar™ W 325 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are pr...展开 ExBar™ W 325 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. 收起 | |
| ExBar™ W 4 | Excalibar Minerals LLC | ExBar™ W 4 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 4 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 4u and an oil absorption of 12. 收起 | |
| ExBar™ W 400 | Excalibar Minerals LLC | ExBar™ W 400 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are pr...展开 ExBar™ W 400 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 8u and an oil absorption of 10. 收起 | |
| ExCal® 100 | Excalibar Minerals LLC | ExCal® 100 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |
| ExCal® 200 | Excalibar Minerals LLC | ExCal® 200 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |
| ExCal® 325 | Excalibar Minerals LLC | ExCal® 325 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |
| ExCal® 400 | Excalibar Minerals LLC | ExCal® 400 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |
| ExCal® CW 100 | Excalibar Minerals LLC | ExCal® CW 100 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 100 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起 | |
| ExCal® CW 200 | Excalibar Minerals LLC | ExCal® CW 200 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 200 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起 | |
| ExCal® CW 325 | Excalibar Minerals LLC | ExCal® CW 325 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 325 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起 | |
| Hardeners 111 | Synpol Products PVT. Ltd | Hardeners 111 is an aliphatic polyamine. This product has a viscosity of 15-25 cPs and a density of 0.98-0.99 g/cm3. Hardeners 111 is most commonly used in adhesive and coal tar modified surface coating applications. | |
| Hardeners 222 | Synpol Products PVT. Ltd | Hardeners 222 is an aliphatic polyamine. This product has a viscosity of 7-10 cPs and a density of 0.95-0.96 g/cm3. Hardeners 222 is most commonly used in adhesive and coal tar modified surface coating applications. | |
| Hardeners 260 | Synpol Products PVT. Ltd | Hardeners 260 is a modified aliphatic polyamine. This product has a viscosity of 75-80 cPs and a density of 1.0-1.1 g/cm3. Hardeners 260 is most commonly used in solvent-free epoxy coating and lamination applications. | |
| Hardeners 280 | Synpol Products PVT. Ltd | Hardeners 280 is a modified aliphatic polyamine. This product has a viscosity of 20-30 cPs and a density of 1.14-1.16 g/cm3. Hardeners 280 is most commonly used as a hardener in coating applications. | |
| Hardeners 340 | Synpol Products PVT. Ltd | Hardeners 340 is a modified aromatic polyamine. This product has a viscosity of 150-210 cPs and a density of 1.13-1.14 g/cm3. Hardeners 340 is most commonly used as a hardener in concrete and underwater coating applications. | |
| Hardeners 345 | Synpol Products PVT. Ltd | Hardeners 345 is a modified aliphatic polyamine. This product has a viscosity of 6-9 cPs and a density of 1.10-1.12 g/cm3. Hardeners 345 is most commonly used as a hardener in concrete and underwater coating applications. | |
| Hardeners 350 | Synpol Products PVT. Ltd | Hardeners 350 is a modified aliphatic polyamine. This product has a viscosity of 150-210 cPs and a density of 1.13-1.14 g/cm3. Hardeners 350 is most commonly used as a hardener in concrete and underwater coating applications. | |
| Hardeners 444 | Synpol Products PVT. Ltd | Hardeners 444 is an aliphatic amine epoxy adduct. This product has a viscosity of 2-4 cPs and a density of 0.95-0.96 g/cm3. Hardeners 444 is most commonly used in chemical and solvent-resistant coating applications. | |
| Hardeners 473 | Synpol Products PVT. Ltd | Hardeners 473 is a polyamine epoxy adduct. This product has a viscosity of 30-60 cPs and a density of 1.07-1.09 g/cm3. Hardeners 473 is most commonly used as a hardener in solvent-free epoxy coating applications. | |
| Hardeners 473 | Synpol Products PVT. Ltd | Hardeners 473 is an aliphatic amine adduct. This product has a viscosity of 100-140 cPs and a density of 1.10-1.12 g/cm3. Hardeners 473 is most commonly used in fast-setting adhesive applications. | |
| Hardeners 620 | Synpol Products PVT. Ltd | Hardeners 620 is a cycloaliphatic amine epoxy adduct. This product has a viscosity of 3-5 cPs and a density of 1.02-1.03 g/cm3. Hardeners 620 is most commonly used in flooring adhesive applications. | |
| Hardeners 640 | Synpol Products PVT. Ltd | Hardeners 640 is a phenyl alkamine. This product has a viscosity of 20-40 cPs and a density of 0.98-1.0 g/cm3. Hardeners 640 is most commonly used in solvent-free and high-solids epoxy coating applications. | |
| KA-101 | Keeneyes International Co., Ltd. | KA-101 is a decolored aldehyde resin with a high softening point that can be applied in a wide range of coatings. It has excellent anti-yellowing effects and is able to improve glossiness and hardness. This product is especially suitable for the preparati...展开 KA-101 is a decolored aldehyde resin with a high softening point that can be applied in a wide range of coatings. It has excellent anti-yellowing effects and is able to improve glossiness and hardness. This product is especially suitable for the preparation of universal color pastes. 收起 | |
| KA-105 | Keeneyes International Co., Ltd. | KA-105 is a polyketone resin. It is a light color, transparent, nontoxic, non-saponified hardened resin. This product can considerably increase the glossiness, adhesive force, fullness, and aging resistance of the products. | |
| KA-120 | Keeneyes International Co., Ltd. | KA-120 is a polyketone resin. It is a light color, transparent, nontoxic, non-saponified hardened resin. This product can considerably increase the glossiness, adhesive force, fullness, and aging resistance of the products. | |
| KA-552 | Keeneyes International Co., Ltd. | KA-552, a tetra-functional group containing β-hydroxyalkylamide crosslinker, is suitable for the production of outdoor polyester powder coatings. As a substitute of TGIC, it can cure with carboxyl-terminated polyester or acrylic resin to provide TGIC-free...展开 KA-552, a tetra-functional group containing β-hydroxyalkylamide crosslinker, is suitable for the production of outdoor polyester powder coatings. As a substitute of TGIC, it can cure with carboxyl-terminated polyester or acrylic resin to provide TGIC-free based exterior durable powder coatings. Its characteristics include low toxicity, non-irritating to skin, and good weather durability. 收起 | |
| KA-6088 | Keeneyes International Co., Ltd. | KA-6088 is a powder flowing agent which takes silicon dioxide as the carrier and adsorbs the same brand liquid flowing gloss agent BLP-402. It can improve flow and gloss characteristics, eliminate shrinking holes and pear eyes, and reduce orange-skin and ...展开 KA-6088 is a powder flowing agent which takes silicon dioxide as the carrier and adsorbs the same brand liquid flowing gloss agent BLP-402. It can improve flow and gloss characteristics, eliminate shrinking holes and pear eyes, and reduce orange-skin and pinholes. 收起 | |
| KA-68 | Keeneyes International Co., Ltd. | KA-68, also known as Hardener MB68, is a low-gloss curing agent composed of a salt of organic polycaroxilic acid with a cyclic amine. It is recommended for epoxy resins and epoxy polyester hybrid powder coatings. This product is used to achieve coatings w...展开 KA-68, also known as Hardener MB68, is a low-gloss curing agent composed of a salt of organic polycaroxilic acid with a cyclic amine. It is recommended for epoxy resins and epoxy polyester hybrid powder coatings. This product is used to achieve coatings with matte surface having excellent mechanical quality and wonderful reappearance. 收起 | |
| KA-7101 | Keeneyes International Co., Ltd. | KA-7101is a matting powder mainly used for amine baking coating, PU and PE coating. It offers high matting efficiency, good transparency, and easy dispersibility. This product has no adverse effect on coating films. | |
| KA-7111 | Keeneyes International Co., Ltd. | KA-7111 is a special matting powder which is used in PU semi-gloss coatings for artificial leather. It has many beneficial properties, such as good transparency, good dispersibility, high matting effect, and good hand feel and smoothness. | |
| KA-7302 | Keeneyes International Co., Ltd. | KA-7302 is a matting powder for PU and PE coatings. It has high matting efficiency, good transparency, and is easily dispersible. This product has no adverse effect on coating films. | |
| KA-7502 | Keeneyes International Co., Ltd. | KA-7502 is a matting agent intended for sealants and plastics. It has an excellent matting/flatting effect, and can meet such special requirements like transparency and dispersibility. | |
| KA-7602 | Keeneyes International Co., Ltd. | KA-7602 is a matting powder for amine baking coatings, PU and PE coatings. It has high matting efficiency, good transparency, and is easily dispersible. This product has no adverse effect on coating films. | |
| KA-81 | Keeneyes International Co., Ltd. | KA-81 is a decolored aldehyde resin that can be applied in a wide range of coatings. It has excellent anti-yellowing effects and is able to improve glossiness and hardness. This product is especially suitable for the preparation of universal color pastes. | |
| KA-81F | Keeneyes International Co., Ltd. | KA-81F is a solvent-free decolored aldehyde resin that can be applied in a wide range of coatings. It has excellent anti-yellowing effects and is able to improve glossiness and hardness. This product is especially suitable for the preparation of universal...展开 KA-81F is a solvent-free decolored aldehyde resin that can be applied in a wide range of coatings. It has excellent anti-yellowing effects and is able to improve glossiness and hardness. This product is especially suitable for the preparation of universal color pastes. 收起 | |
| KA-81S | Keeneyes International Co., Ltd. | KA-81S is a high viscosity decolored aldehyde resin that can be applied in a wide range of coatings. It has excellent anti-yellowing effects and is able to improve glossiness and hardness. This product is especially suitable for the preparation of univers...展开 KA-81S is a high viscosity decolored aldehyde resin that can be applied in a wide range of coatings. It has excellent anti-yellowing effects and is able to improve glossiness and hardness. This product is especially suitable for the preparation of universal color pastes. 收起 | |
| KA-81U | Keeneyes International Co., Ltd. | KA-81U is a decolored aldehyde resin that can be applied in UV ink. It has excellent anti-yellowing effects and is able to improve glossiness and hardness. This product is especially suitable for the preparation of universal color pastes. | |
| KA-B | Keeneyes International Co., Ltd. | KA-B is a conductive mica powder, a composite material with mica grain as a base material coated with MOS. These grains arrange closely in insulation coating so as to form conducting paths for electrons. This product is recommended for solvent conductive ...展开 KA-B is a conductive mica powder, a composite material with mica grain as a base material coated with MOS. These grains arrange closely in insulation coating so as to form conducting paths for electrons. This product is recommended for solvent conductive floor coatings, ESD anti-corrosion coatings, decorative conductive coatings, and conductive powder coatings. 收起 | |
| KA-C | Keeneyes International Co., Ltd. | KA-C is a conductive mica powder, a composite material with mica grain as a base material coated with MOS. These grains arrange closely in insulation coating so as to form conducting paths for electrons. This product is recommended for solvent conductive ...展开 KA-C is a conductive mica powder, a composite material with mica grain as a base material coated with MOS. These grains arrange closely in insulation coating so as to form conducting paths for electrons. This product is recommended for solvent conductive floor coatings, ESD anti-corrosion coatings, decorative conductive coatings, and conductive powder coatings. 收起 | |
| KA-D4 | Keeneyes International Co., Ltd. | KA-D4 is a conductive mica powder, a composite material with mica grain as a base material coated with MOS. These grains arrange closely in insulation coating so as to form conducting paths for electrons. This product is recommended for solvent conductive...展开 KA-D4 is a conductive mica powder, a composite material with mica grain as a base material coated with MOS. These grains arrange closely in insulation coating so as to form conducting paths for electrons. This product is recommended for solvent conductive floor coatings, ESD anti-corrosion coatings, decorative conductive coatings, and conductive powder coatings. 收起 | |
| KA-D40 | Keeneyes International Co., Ltd. | KA-D40 is a conductive mica powder, a composite material with mica grain as a base material coated with MOS. These grains arrange closely in insulation coating so as to form conducting paths for electrons. This product is recommended for solvent conductiv...展开 KA-D40 is a conductive mica powder, a composite material with mica grain as a base material coated with MOS. These grains arrange closely in insulation coating so as to form conducting paths for electrons. This product is recommended for solvent conductive floor coatings, ESD anti-corrosion coatings, decorative conductive coatings, and conductive powder coatings. 收起 | |
| KA-P | Keeneyes International Co., Ltd. | KA-P is a conductive mica powder, a composite material with mica grain as a base material coated with MOS. These grains arrange closely in insulation coating so as to form conducting paths for electrons. This product is recommended for solvent-free conduc...展开 KA-P is a conductive mica powder, a composite material with mica grain as a base material coated with MOS. These grains arrange closely in insulation coating so as to form conducting paths for electrons. This product is recommended for solvent-free conductive floor coatings. 收起 | |
| KA-PE-27 | Keeneyes International Co., Ltd. | KA-PE-27 is a special designed polyurethane-modified epoxy resin. It is able to increase the toughness of epoxy resin without reducing the hardness. This product also improves the compatibility with other polymers. It can be applied into paint formula to ...展开 KA-PE-27 is a special designed polyurethane-modified epoxy resin. It is able to increase the toughness of epoxy resin without reducing the hardness. This product also improves the compatibility with other polymers. It can be applied into paint formula to enforce the property of coating film. With a proper catalyst, this product can improve the adhesion property between metal and plastic material. 收起 | |
| KA-T11 | Keeneyes International Co., Ltd. | KA-T11 is a conductive mica powder, a composite material with mica grain as a base material coated with MOS. These grains arrange closely in insulation coating so as to form conducting paths for electrons. This product is recommended for solvent-free cond...展开 KA-T11 is a conductive mica powder, a composite material with mica grain as a base material coated with MOS. These grains arrange closely in insulation coating so as to form conducting paths for electrons. This product is recommended for solvent-free conductive floor coatings and conductive adhesives. 收起 | |
| KA-W1 | Keeneyes International Co., Ltd. | KA-W1 is a conductive mica powder, a composite material with mica grain as a base material coated with MOS. These grains arrange closely in insulation coating so as to form conducting paths for electrons. This product is recommended for solvent-free condu...展开 KA-W1 is a conductive mica powder, a composite material with mica grain as a base material coated with MOS. These grains arrange closely in insulation coating so as to form conducting paths for electrons. This product is recommended for solvent-free conductive floor coatings. 收起 | |
| KA-W11 | Keeneyes International Co., Ltd. | KA-W11 is a conductive mica powder, a composite material with mica grain as a base material coated with MOS. These grains arrange closely in insulation coating so as to form conducting paths for electrons. This product is recommended for solvent-free cond...展开 KA-W11 is a conductive mica powder, a composite material with mica grain as a base material coated with MOS. These grains arrange closely in insulation coating so as to form conducting paths for electrons. This product is recommended for solvent-free conductive floor coatings and conductive adhesives. 收起 | |
| KAE-14 | Keeneyes International Co., Ltd. | KAE-14 is a newly-developed epoxy resin, based on the traditional epoxy resin E-12. With comparison to the traditional E-12, it has higher epoxy values and is particularly suitable to produce the polyester epoxy hybrid powder coatings in 70:30 and of high...展开 KAE-14 is a newly-developed epoxy resin, based on the traditional epoxy resin E-12. With comparison to the traditional E-12, it has higher epoxy values and is particularly suitable to produce the polyester epoxy hybrid powder coatings in 70:30 and of high peeling strength. 收起 | |
| KAFU-308 | Keeneyes International Co., Ltd. | KAFU-308 is a PTFE wax, highly fragmented with the unique use of advanced powder molding process combined with modern nanotechnology. Compared with traditional grinding mill products, it can help achieve anti-rub, abrasion resistance and slip characterist...展开 KAFU-308 is a PTFE wax, highly fragmented with the unique use of advanced powder molding process combined with modern nanotechnology. Compared with traditional grinding mill products, it can help achieve anti-rub, abrasion resistance and slip characteristics in inks and coatings applications. 收起 | |
| KAFU-508 | Keeneyes International Co., Ltd. | KAFU-508 is a PTFE wax, highly fragmented with the unique use of advanced powder molding process combined with modern nanotechnology. Compared with traditional grinding mill products, it can help achieve anti-rub, abrasion resistance and slip characterist...展开 KAFU-508 is a PTFE wax, highly fragmented with the unique use of advanced powder molding process combined with modern nanotechnology. Compared with traditional grinding mill products, it can help achieve anti-rub, abrasion resistance and slip characteristics in inks and coatings applications. 收起 | |
| KAPU IL-50 | Keeneyes International Co., Ltd. | KAPU IL-50is an aromatic polyisocyanate based on toluene diisocyanate and dissolved in butyl acetate. It is used in the formulation of fast drying two-component clear and pigmented polyurethane coatings for wood, metal, and paper substrates. | |
| KAPU L-75 | Keeneyes International Co., Ltd. | KAPU L-75is an aromatic polyisocyanate based on toluene diisocyanate. Form supplied is approximately 75% in ethyl acetate. Systems crosslingked with KAPU L-75 can be used as coatings for furniture, parquet flooring, metal, paper, plastics and mineral subs...展开 KAPU L-75is an aromatic polyisocyanate based on toluene diisocyanate. Form supplied is approximately 75% in ethyl acetate. Systems crosslingked with KAPU L-75 can be used as coatings for furniture, parquet flooring, metal, paper, plastics and mineral substrates. These can be used to bond many materials, such as wood, metal and plastic. 收起 | |
| KLX 7997 | Nokxeller Quimica Ltda | KLX 7997 is a versatile polyether based aromatic isocyanate anionic dispersion for high tack formulations. It has a very soft and flexible film that can be used as a high initial and final bond strength and heat resistance. Typical applications are for mo...展开 KLX 7997 is a versatile polyether based aromatic isocyanate anionic dispersion for high tack formulations. It has a very soft and flexible film that can be used as a high initial and final bond strength and heat resistance. Typical applications are for modifying pressure sensitive textile & construction adhesives, neoprene, EVA and other plastic & leather primer applications. Once crosslinked shows outstanding water resistance. 收起 | |
| MDATP-1W | Keeneyes International Co., Ltd. | MDATP-1W is modified aluminum tripolyphosphate. It has excellent anti-corrosive benefits and high efficiency. It also offers good adhesive force, impact resilience, and wide adaptability. This product is recommended for high grade solvent-based and water-...展开 MDATP-1W is modified aluminum tripolyphosphate. It has excellent anti-corrosive benefits and high efficiency. It also offers good adhesive force, impact resilience, and wide adaptability. This product is recommended for high grade solvent-based and water-soluble paints. 收起 | |
| MDATP-2SW | Keeneyes International Co., Ltd. | MDATP-1W is modified aluminum tripolyphosphate. It has excellent anti-corrosive benefits and high efficiency. It also offers good adhesive force, impact resilience, and wide adaptability. This product is recommended for high grade solvent-based and water-...展开 MDATP-1W is modified aluminum tripolyphosphate. It has excellent anti-corrosive benefits and high efficiency. It also offers good adhesive force, impact resilience, and wide adaptability. This product is recommended for high grade solvent-based and water-soluble paints. 收起 | |
| NKX 144 | Nokxeller Quimica Ltda | NKX 144 is a small particle size high gloss PU polyesther aliphatic topcoat. It forms a transparent film of medium hardness suitable as a final varnish or topcoat where high gloss, abrasion resistance and clarity are required. When crosslinked, presents e...展开 NKX 144 is a small particle size high gloss PU polyesther aliphatic topcoat. It forms a transparent film of medium hardness suitable as a final varnish or topcoat where high gloss, abrasion resistance and clarity are required. When crosslinked, presents excellent weatherability. It is ideal for use as a topcoat for leather finish and PVC, indoor paints formulation, etc. 收起 | |
| NKX 176 | Nokxeller Quimica Ltda | NKX 176 is a soft and elastic PUD with outstanding film-forming properties. NKX 176 is a NON IONIC VOC free soft non tacky and elastic PUD with outstanding film-forming properties. It can be used as a universal coating resin for textile due to its varied ...展开 NKX 176 is a soft and elastic PUD with outstanding film-forming properties. NKX 176 is a NON IONIC VOC free soft non tacky and elastic PUD with outstanding film-forming properties. It can be used as a universal coating resin for textile due to its varied possibility of uses. NKX 176 has a flexible and soft but non-tacky handle. It has varied applications especially in textile finishes where body handle, durability are required. It is ideal for use as a print binder and as an universal coating resin in textile applications, garment leather finish, and coatings for digital printing in fabrics. 收起 | |
| NKX 183 | Nokxeller Quimica Ltda | NKX 180 based resin, with higher concentration.Multipurpose resin of extreme adhesion, outstanding toughness and abrasion resistance suitable for coatings for the following substrates: plastic, synthetic fabric, metal, shoe finish, etc. Due to its high cr...展开 NKX 180 based resin, with higher concentration.Multipurpose resin of extreme adhesion, outstanding toughness and abrasion resistance suitable for coatings for the following substrates: plastic, synthetic fabric, metal, shoe finish, etc. Due to its high crystalline segment concentration the polymer presents itself tough, yet flexible and resistant. 收起 | |
| NKX 201 NMP-Free | Nokxeller Quimica Ltda | NKX 201 NMP-Free shows excellent chemical, weathering and abrasion resistance due to higher resistance of this kind of polyol. NKX 201 presents wide use possibilities considering its high gloss and transparency properties as in synthetic substrates, as hi...展开 NKX 201 NMP-Free shows excellent chemical, weathering and abrasion resistance due to higher resistance of this kind of polyol. NKX 201 presents wide use possibilities considering its high gloss and transparency properties as in synthetic substrates, as high gloss topcoats in leather finish, wood flooring or print screen putties, metallic applications. 收起 | |
| NKX 240 | Nokxeller Quimica Ltda | NKX 240 is a multipurpose resin of exceptional properties was developed to serve a wide range of applications for flexible and rigid substrates. NKX 240 shows up a clear film with good gloss retention and presents high adhesion and heat resistance. | |
| NKX 245 | Nokxeller Quimica Ltda | NKX-245 is a modified polyester type suitable for glossy aqueous coatings as wood flooring. NKX 245 has a very hard film providing high abrasion resistance, and adhesion and can be easily formulated along with other components such as acrylic resins, pigm...展开 NKX-245 is a modified polyester type suitable for glossy aqueous coatings as wood flooring. NKX 245 has a very hard film providing high abrasion resistance, and adhesion and can be easily formulated along with other components such as acrylic resins, pigment dispersions, fillers, thickeners, etc. 收起 | |
| NKX 250 | Nokxeller Quimica Ltda | NKX-250 is a very hard PUD polyester type adequate for clear or pigmented waterbased topcoat for rigid substrates specially furniture, metal or hard synthetic substrates. Its hard, transparent and glossy film provides good abrasion resistance, adhesion an...展开 NKX-250 is a very hard PUD polyester type adequate for clear or pigmented waterbased topcoat for rigid substrates specially furniture, metal or hard synthetic substrates. Its hard, transparent and glossy film provides good abrasion resistance, adhesion and gloss. 收起 | |
| NKX 274 | Nokxeller Quimica Ltda | NKX 274 is a high solid small particle size resin with excellent chemical resistance. It is adequate for varied market segments wherever is necessary to replace a solventborne for a waterborne paint. Typical uses in metal, soles, PVC, other synthetic subs...展开 NKX 274 is a high solid small particle size resin with excellent chemical resistance. It is adequate for varied market segments wherever is necessary to replace a solventborne for a waterborne paint. Typical uses in metal, soles, PVC, other synthetic substrate paint compositions wherever high gloss, good adhesions and chemical resistance are necessary. 收起 | |
| NKX 279 | Nokxeller Quimica Ltda | NKX 279 is a fine particle size resin and developed to formulate water topcoats of high adhesion and very good chemical resistance. Typical end use applications include top coatings for rigid and flexible substrates including wood, paper, metallic surface...展开 NKX 279 is a fine particle size resin and developed to formulate water topcoats of high adhesion and very good chemical resistance. Typical end use applications include top coatings for rigid and flexible substrates including wood, paper, metallic surface , plastics and especially PVC and other synthetic laminates.NKX 279 is high performance water based coating and can replace traditional solvent based coatings in wide applications possibilities. 收起 | |
| P-Chlorobenzotrifluoride | Keeneyes International Co., Ltd. | P-chlorobenzotrifluoride is highly regarded in the printing ink industry for its ability to dissolve high volumes of ink, exhibiting an ink to solvent ratio of 22:20. Another benefit of using p-chlorobenzotrifluoride as a solvent is that it dissolves inks...展开 P-chlorobenzotrifluoride is highly regarded in the printing ink industry for its ability to dissolve high volumes of ink, exhibiting an ink to solvent ratio of 22:20. Another benefit of using p-chlorobenzotrifluoride as a solvent is that it dissolves inks faster than toluene, a common alternative solvent. PCBTF is also used as a replacement for xylene in cleaning, degreasing, and paint thinner products. 收起 | |
| Synpol 1001 | Synpol Products PVT. Ltd | Synpol 1001 is a butylated UF amino resin. This product has a non-volatile compound content of 63-67% and a density at 25°C of 1.03-1.05 g/cm3. Synpol 1001 is most commonly used in general purpose baking enamel applications. | |
| Synpol 105X | Synpol Products PVT. Ltd | Synpol 105X is a reactive polyamide resin. This product has a density at 25°C of 0.96-0.98 g/cm3 and a non-volatile compound content of 58-62%. Synpol 105X is most commonly used as a hardener in solvent-based epoxy coating applications. | |
| Synpol 115 | Synpol Products PVT. Ltd | Synpol 115 is a reactive polyamide resin. This product has a density at 25°C of 0.97-0.98 g/cm3. Synpol 115 is most commonly used as a hardener in protective and decorative coating applications. | |
| Synpol 115 (70% in Xylene) | Synpol Products PVT. Ltd | Synpol 115 (70% in Xylene) is a reactive polyamide resin. This product has a density at 25°C of 0.94-0.95 g/cm3 and a non-volatile compound content of 68-72%. Synpol 115 (70% in Xylene) is most commonly used as a hardener in protective and decorative coa...展开 Synpol 115 (70% in Xylene) is a reactive polyamide resin. This product has a density at 25°C of 0.94-0.95 g/cm3 and a non-volatile compound content of 68-72%. Synpol 115 (70% in Xylene) is most commonly used as a hardener in protective and decorative coating applications. 收起 | |
| Synpol 130 | Synpol Products PVT. Ltd | Synpol 130 is a reactive polyamide resin. This product has a density at 25°C of 1.03-1.04 g/cm3 and a non-volatile compound content of 68-72%. Synpol 130 is most commonly used as a hardener in water-emulsifiable epoxy coating applications. | |
| Synpol 140 | Synpol Products PVT. Ltd | Synpol 140 is a reactive polyamide resin. This product has a density at 25°C of 0.96-0.98 g/cm3. Synpol 140 is most commonly used as a hardener in solvent-free coating, adhesive, and lamination applications. | |
| Synpol 150 | Synpol Products PVT. Ltd | Synpol 150 is a reactive polyamide resin. This product has a density at 25°C of 0.975-0.985 g/cm3. Synpol 150 is most commonly used as a hardener in solvent-free coating, adhesive, and lamination applications. | |
| Synpol 160 | Synpol Products PVT. Ltd | Synpol 160 is a reactive polyamide resin. This product has a density at 25°C of 0.94-0.96 g/cm3. Synpol 160 is most commonly used as a hardener in solvent-free coating, adhesive, and lamination applications. | |
| Synpol 160 LP | Synpol Products PVT. Ltd | Synpol 160 LP is a reactive polyamide resin. This product has a density at 25°C of 0.92-0.94 g/cm3. Synpol 160 LP is most commonly used as a hardener in solvent-free coating applications. | |
| Synpol 1800 | Synpol Products PVT. Ltd | Synpol 1800 is a bisphenol A-based, unmodified plasticizer. This product has a density of 1.17-1.19 g/cm3 and a melting point of 125-135ºC. Synpol 1800 is most commonly used in thermosetting bake finish and chemical-resistant container coating application...展开 Synpol 1800 is a bisphenol A-based, unmodified plasticizer. This product has a density of 1.17-1.19 g/cm3 and a melting point of 125-135ºC. Synpol 1800 is most commonly used in thermosetting bake finish and chemical-resistant container coating applications. 收起 | |
| Synpol 200 | Synpol Products PVT. Ltd | Synpol 200 is a bisphenol A-based, unmodified epoxy resin. This product has a viscosity at 25°C of 120-160 Poises. Synpol 200 is most commonly used in coating, lamination, and adhesive applications. | |
| Synpol 2080 | Synpol Products PVT. Ltd | Synpol 2080 is a coconut fatty acid-modified epoxy ester. This product has a density of 0.97-0.98 g/cm3. Synpol 2080 is most commonly used in clear and pigmented electronic and appliance finish applications. | |
| Synpol 210 | Synpol Products PVT. Ltd | Synpol 210 is a bisphenol A-based, unmodified reactive diluent. This product has a viscosity at 25°C of 180-210 Poises. Synpol 210 is most commonly used in coating, lamination, and adhesive applications. | |
| Synpol 220 | Synpol Products PVT. Ltd | Synpol 220 is a bisphenol A-based, unmodified reactive diluent. This product has a viscosity at 25°C of 180-200 Poises. Synpol 220 is most commonly used in coating, lamination, and adhesive applications. | |
| Synpol 230 | Synpol Products PVT. Ltd | Synpol 230 is a bisphenol A-based, unmodified plasticizer. This product has a viscosity at 25°C of 230-250 Poises. Synpol 230 is most commonly used in coating, lamination, and adhesive applications. | |
| Synpol 280 | Synpol Products PVT. Ltd | Synpol 280 is a bisphenol A-based, unmodified epoxy resin. This product has a density of 1.18-1.19 g/cm3. Synpol 280 is most commonly used in high-solids coating, adhesive, and lamination applications. | |
| Synpol 280 | Synpol Products PVT. Ltd | Synpol 280 is a bisphenol A-based, unmodified plasticizer. This product has a density of 1.22-1.24 g/cm3. Synpol 280 is most commonly used in heat-resistant laminate, electrical casting, adhesive, and coating applications. | |
| Synpol 4000 | Synpol Products PVT. Ltd | Synpol 4000 is a bisphenol A-based, unmodified plasticizer. This product has a density of 1.18-1.19 g/cm3 and a melting point of 145-155ºC. Synpol 4000 is most commonly used in thermosetting bake finish and chemical-resistant container coating application...展开 Synpol 4000 is a bisphenol A-based, unmodified plasticizer. This product has a density of 1.18-1.19 g/cm3 and a melting point of 145-155ºC. Synpol 4000 is most commonly used in thermosetting bake finish and chemical-resistant container coating applications where increased substrate adhesion is required. 收起 | |
| Synpol 450XX | Synpol Products PVT. Ltd | Synpol 450XX is a bisphenol A-based, unmodified epoxy resin. This product has a density of 1.07-1.09 g/cm3. Synpol 450XX is most commonly used in chemical-resistant, air-dry, and bake coating applications. |
