| 1257 Superfast Yellow 10G | Shanghai Honor Industrial Co., LTD | 1257 Superfast Yellow 10G is Pigment Yellow 3, C.I.No. PY3, also known as Hansa Yellow 10G and Arylide Yellow 10G. It has a strong greenish shade, has lower surface area, good opacity, and excellent lightfastness. This product can be used for air-drying p...展开 1257 Superfast Yellow 10G is Pigment Yellow 3, C.I.No. PY3, also known as Hansa Yellow 10G and Arylide Yellow 10G. It has a strong greenish shade, has lower surface area, good opacity, and excellent lightfastness. This product can be used for air-drying paints, latex paints, textile paste and printing inks. 收起 | |
| 1260 SuperFast Yellow RNG | Shanghai Honor Industrial Co., LTD | 1260 SuperFast Yellow RNG是一种有出色分散性的黄绿色粉末。它推荐用于道路标线涂料和工业涂料。 | |
| 1,4-Butanediol (1,4-BDO) | DCC (Dairen Chemical Corp.) | 1,4-Butanediol (1,4-BDO) is produced by hydro-formulation and hydrogenation of Allyl Alcohol, carbon monoxide and hydrogen. 1,4-Butanediol is a colorless, high-boiling liquid with a low order of toxicity. 1,4-Butanediol is used as a raw material for manuf...展开 1,4-Butanediol (1,4-BDO) is produced by hydro-formulation and hydrogenation of Allyl Alcohol, carbon monoxide and hydrogen. 1,4-Butanediol is a colorless, high-boiling liquid with a low order of toxicity. 1,4-Butanediol is used as a raw material for manufacturing carrier solvent in printing ink, and is a key component of hot melt adhesive. 收起 | |
| 2-Methyl-1,3-Propanediol | DCC (Dairen Chemical Corp.) | 2-Methyl-1,3-Propanediol is a by-product, which is produced by hydro-formulation and hydro-generation of Allyl Alcohol, carbon monoxide, and hydrogen. It is a colorless, low viscosity and toxic liquid with a unique molecular structure. 2-Methyl-1,3-Propan...展开 2-Methyl-1,3-Propanediol is a by-product, which is produced by hydro-formulation and hydro-generation of Allyl Alcohol, carbon monoxide, and hydrogen. It is a colorless, low viscosity and toxic liquid with a unique molecular structure. 2-Methyl-1,3-Propanediol is used as a raw material in monomers for the preparation of coatings and binders. 收起 | |
| Alkoxylated 2-Methyl-1,3-Propanediol | DCC (Dairen Chemical Corp.) | Alkoxylated 2-Methyl-1,3-Propanediol is produced by Alkoxylation of 2-Methyl-1,3-Propanediol and Alkoxide. It is a colorless liquid with two primary hydroxyls. Alkoxylated 2-Methyl-1,3-Propanediol is used as a raw material in printing inks, adhesives, and...展开 Alkoxylated 2-Methyl-1,3-Propanediol is produced by Alkoxylation of 2-Methyl-1,3-Propanediol and Alkoxide. It is a colorless liquid with two primary hydroxyls. Alkoxylated 2-Methyl-1,3-Propanediol is used as a raw material in printing inks, adhesives, and paints. 收起 | |
| BURGESS 2211 | Burgess Pigment Company | BURGESS 2211 is a surface modified calcined aluminum silicate that has low warpage and high impact strength. This product is often used in urethane and polyester applications, and can also be used as an extender or filler in paints, coatings, adhesives, a...展开 BURGESS 2211 is a surface modified calcined aluminum silicate that has low warpage and high impact strength. This product is often used in urethane and polyester applications, and can also be used as an extender or filler in paints, coatings, adhesives, and sealants. 收起 | |
| BURGESS 30P® | Burgess Pigment Company | BURGESS 30P® is a flash calcined median particle size clay used extensively in PVC compounds for improving electricals. This product exhibits low specific gravity and excellent color, and can be used as an extender or filler in paints, coatings, adhesives...展开 BURGESS 30P® is a flash calcined median particle size clay used extensively in PVC compounds for improving electricals. This product exhibits low specific gravity and excellent color, and can be used as an extender or filler in paints, coatings, adhesives, and sealants. 收起 | |
| BURGESS 5178 | Burgess Pigment Company | BURGESS 5178 is hydrophobic and a chemical bond between the calcined clay and the polymer exists. This product has been designed to provide excellent wet and dry electrical properties through a proprietary surface treatment. It is often used as an extende...展开 BURGESS 5178 is hydrophobic and a chemical bond between the calcined clay and the polymer exists. This product has been designed to provide excellent wet and dry electrical properties through a proprietary surface treatment. It is often used as an extender or filler in paints, coatings, adhesives, and sealants. 收起 | |
| BURGESS CB | Burgess Pigment Company | BURGESS CB is a surface modified calcined aluminum silicate that has been designed for use in crosslinked polyethylene and polyester. This product can be used as an extender or filler in paints, coatings, adhesives, and sealants. | |
| BURGESS ICEBERG® | Burgess Pigment Company | BURGESS ICEBERG® is a conventionally calcined median particle size, 91-93 GE brightness clay used as an extender of TiO2. It is used in trade sales interior/exterior flat paints and as a filler in polyurethane sealants. This product can provide better opa...展开 BURGESS ICEBERG® is a conventionally calcined median particle size, 91-93 GE brightness clay used as an extender of TiO2. It is used in trade sales interior/exterior flat paints and as a filler in polyurethane sealants. This product can provide better opacity, higher degree of whiteness, better tint strength, easy dispersion, and low moisture levels in moisture sensitive applications. 收起 | |
| BURGESS ICECAP K® | Burgess Pigment Company | BURGESS ICECAP K® is an excellent extender for TiO2 in coatings where a high hegman grind is required. It has good electricals, low compression set, and low water absorption. This product can be used as an extender or filler in paints, coatings, adhesives...展开 BURGESS ICECAP K® is an excellent extender for TiO2 in coatings where a high hegman grind is required. It has good electricals, low compression set, and low water absorption. This product can be used as an extender or filler in paints, coatings, adhesives, and sealants. 收起 | |
| BURGESS ICECAP KSF | Burgess Pigment Company | BURGESS ICECAP KSF is a medium particle size anhydrous (calcined) kaolin clay that is used extensively as a “mild abrasive agent” in various polish applications. This product is a very finely ground dry white powder that exhibits dispersion and extremely ...展开 BURGESS ICECAP KSF is a medium particle size anhydrous (calcined) kaolin clay that is used extensively as a “mild abrasive agent” in various polish applications. This product is a very finely ground dry white powder that exhibits dispersion and extremely low 325 (45 micron) mesh residue. 收起 | |
| BURGESS KE | Burgess Pigment Company | BURGESS KE is an uniquely processed silane modified anhydrous aluminum silicate designed for use in crosslinked polyethylene and polyester systems. This product is a very pure, high brightness, low residue, calcined kaolin that can be used as an extender ...展开 BURGESS KE is an uniquely processed silane modified anhydrous aluminum silicate designed for use in crosslinked polyethylene and polyester systems. This product is a very pure, high brightness, low residue, calcined kaolin that can be used as an extender or filler in paints, coatings, adhesives, and sealants. 收起 | |
| BURGESS NO. 10 | Burgess Pigment Company | BURGESS NO. 10 is a fine particle size, medium brightness hydrous kaolin clay. This product exhibits dispersion in water based, acid pH, alkyd, or solvent based coatings and inks, electrodeposition body primers, as well as EIFS. | |
| BURGESS NO. 17 | Burgess Pigment Company | BURGESS NO. 17 is a fine particle size, high brightness hydrous kaolin clay used to extend TiO2 in semigloss paints and inks. This product is well ground, has excellent whiteness and dispersion, and high brightness. | |
| BURGESS NO. 20 | Burgess Pigment Company | BURGESS NO. 20 is a fine particle size, medium brightness hydrous kaolin clay. This product is used in jacketing layer of wire and cable insulation compounds, rubber roll covers, polishing compounds and concrete curing compounds. It can also be used as an...展开 BURGESS NO. 20 is a fine particle size, medium brightness hydrous kaolin clay. This product is used in jacketing layer of wire and cable insulation compounds, rubber roll covers, polishing compounds and concrete curing compounds. It can also be used as an extender or filler in paints, coatings, adhesives, and sealants. 收起 | |
| BURGESS NO. 27 | Burgess Pigment Company | BURGESS NO. 27 is an ultra fine particle size, medium brightness hydrous kaolin clay. This product is used as an extender in semigloss, satin, and gloss paints. | |
| BURGESS NO. 28 | Burgess Pigment Company | BURGESS NO. 28 is an ultra fine particle size, higher brightness hydrous kaolin clay. This product is used to extend TiO2 while maintaining tint strength and gloss. It is used extensively in water based satin and semigloss coating systems. | |
| BURGESS NO. 30® | Burgess Pigment Company | BURGESS NO. 30® is a partially calcined clay used extensively in PVC compounds to improve insulation resistance. This product exhibits excellent dispersion and color uniformity, and can be used as an extender or filler in paints, coatings, adhesives, and ...展开 BURGESS NO. 30® is a partially calcined clay used extensively in PVC compounds to improve insulation resistance. This product exhibits excellent dispersion and color uniformity, and can be used as an extender or filler in paints, coatings, adhesives, and sealants. 收起 | |
| BURGESS NO. 40 | Burgess Pigment Company | BURGESS NO. 40 is a median particle size, medium brightness hydrous kaolin clay. This product is an acid pH clay exhibiting excellent dispersion properties, and can be used in trade sales coatings and adhesives. | |
| BURGESS NO. 50® | Burgess Pigment Company | BURGESS NO. 50® is a high brightness, fine particle size calcined kaolin that is an extender of TiO2 in coatings or polymeric systems. This product facilitates reduction of prime pigment while maintaining opacity, whiteness, and tint strength of coatings ...展开 BURGESS NO. 50® is a high brightness, fine particle size calcined kaolin that is an extender of TiO2 in coatings or polymeric systems. This product facilitates reduction of prime pigment while maintaining opacity, whiteness, and tint strength of coatings and retention of physical properties in filled polymeric systems. 收起 | |
| BURGESS NO. 60 | Burgess Pigment Company | BURGESS NO. 60 is an acid pH, fine particle size, medium brightness hydrous kaolin clay with excellent dispersion properties. This product is used in inks, adhesives and industrial finishes, electrostatic deposition body primers, and EIFS. | |
| BURGESS NO. 97 | Burgess Pigment Company | BURGESS NO. 97 is an ultra fine particle size, medium brightness hydrous kaolin clay that exhibits excellent tint strength. This product is a well-ground extender of TiO2 in semigloss, satin, and gloss paints. | |
| BURGESS NO. 98 | Burgess Pigment Company | BURGESS NO. 98 is an ultra fine particle size, higher brightness hydrous kaolin clay that exhibits excellent tint strength and dispersion. This product is a well ground, premium extender of TiO2 in water based, solvent or alkyd semigloss, satin, and gloss...展开 BURGESS NO. 98 is an ultra fine particle size, higher brightness hydrous kaolin clay that exhibits excellent tint strength and dispersion. This product is a well ground, premium extender of TiO2 in water based, solvent or alkyd semigloss, satin, and gloss paints. 收起 | |
| BURGESS OPTIPOZZ® | Burgess Pigment Company | BURGESS OPTIPOZZ® is a high reactivity metakaolin produced by a patented process. This product increases chemical resistance and durability, and reduces shrinkage. It can be used as an extender or filler in paints, coatings, adhesives, and sealants. | |
| BURGESS OPTIWHITE® | Burgess Pigment Company | BURGESS OPTIWHITE® is a premium whiteness flash calcined extender for TiO2 exhibiting GE brightness used extensively in First Line interior/exterior flat or low sheen water based and alkyd paint systems. This product exhibits excellent whiteness retention...展开 BURGESS OPTIWHITE® is a premium whiteness flash calcined extender for TiO2 exhibiting GE brightness used extensively in First Line interior/exterior flat or low sheen water based and alkyd paint systems. This product exhibits excellent whiteness retention and hiding when embedded in coatings and polymers. It can provide excellent dispersion, high hiding, and improved film properties. 收起 | |
| BURGESS OPTIWHITE MX® | Burgess Pigment Company | BURGESS OPTIWHITE MX® is a flash calcined clay exhibiting GE Brightness and extension of TiO2, whiteness, touchup, and tint strength. This product is used extensively in flat or low sheen interior/exterior trade sales water-based, alkyd, or solvent-based ...展开 BURGESS OPTIWHITE MX® is a flash calcined clay exhibiting GE Brightness and extension of TiO2, whiteness, touchup, and tint strength. This product is used extensively in flat or low sheen interior/exterior trade sales water-based, alkyd, or solvent-based coatings by reducing the amount of TiO2 and lowering raw material costs while maintaining opacity, whiteness, and tint strength. 收起 | |
| BURGESS OPTIWHITE P® | Burgess Pigment Company | BURGESS OPTIWHITE P® is a flash calcined clay used extensively to extend TiO2. This product exhibits GE Brightness, improves touchup, scrub, and burnish resistance. It is used in flat interior trade sales paints which do not require maximum whiteness. | |
| BURGESS POLYCLAY | Burgess Pigment Company | BURGESS POLYCLAY is a fine particle size, medium brightness hydrous kaolin clay used in inks. | |
| BURGESS THERMOGLACE H | Burgess Pigment Company | BURGESS THERMOGLACE H is a delaminated, fine particle size, medium brightness hydrous kaolin clay. This product is used in primers and trade sales coatings for the reduction of mud-cracking (micro-cracking due to film stress) and reduction of permeability...展开 BURGESS THERMOGLACE H is a delaminated, fine particle size, medium brightness hydrous kaolin clay. This product is used in primers and trade sales coatings for the reduction of mud-cracking (micro-cracking due to film stress) and reduction of permeability. 收起 | |
| DA-100 | DCC (Dairen Chemical Corp.) | DA-100 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-100 forms a flexible film with adhesive properties for broad applications. DA-100 is used as a base emu...展开 DA-100 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-100 forms a flexible film with adhesive properties for broad applications. DA-100 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-100 is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-100L | DCC (Dairen Chemical Corp.) | DA-100L is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-100L forms a flexible film with adhesive properties for broad applications. DA-100L is used as a base e...展开 DA-100L is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-100L forms a flexible film with adhesive properties for broad applications. DA-100L is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-100L is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-101 | DCC (Dairen Chemical Corp.) | DA-101 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-101 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C o...展开 DA-101 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-101 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 1500-2500 mPa.s. DA-101 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-101 is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-102 | DCC (Dairen Chemical Corp.) | DA-102 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-102 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C o...展开 DA-102 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-102 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 2500-3700 mPa.s. DA-102 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-102 is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-102H | DCC (Dairen Chemical Corp.) | DA-102H is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-102H forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C...展开 DA-102H is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-102H forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 3500-4500 mPa.s. DA-102H is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-102H is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-103 | DCC (Dairen Chemical Corp.) | DA-103 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-103 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C o...展开 DA-103 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-103 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 1500-2500 mPa.s. DA-103 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-103 is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-103H | DCC (Dairen Chemical Corp.) | DA-103H is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-103H forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C...展开 DA-103H is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-103H forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 3200-4200 mPa.s. DA-103H is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-103H is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-104 | DCC (Dairen Chemical Corp.) | DA-104 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-104 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C o...展开 DA-104 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-104 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 2000-3000 mPa.s. DA-104 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-104 is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-107 | DCC (Dairen Chemical Corp.) | DA-107 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-107 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C o...展开 DA-107 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-107 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 1000-2500 mPa.s. DA-107 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-107 is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-1100 | DCC (Dairen Chemical Corp.) | DA-1100 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and it forms a stable emulsion. DA-1100 improves adhesion, flex strength, abrasion resistance, and workability of modified compounds. DA-1100 ca...展开 DA-1100 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and it forms a stable emulsion. DA-1100 improves adhesion, flex strength, abrasion resistance, and workability of modified compounds. DA-1100 can be used in tile adhesives. 收起 | |
| DA-111 | DCC (Dairen Chemical Corp.) | DA-111 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-111 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C o...展开 DA-111 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-111 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 1500-2500 mPa.s. It is designed as a medium Tg product at around approximately 14 °C. DA-111 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-111 is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-1120 | DCC (Dairen Chemical Corp.) | DA-1120 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and it forms a stable emulsion. DA-1120 improves adhesion, flex strength, abrasion resistance, and workability of modified compounds. DA-1120 ca...展开 DA-1120 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and it forms a stable emulsion. DA-1120 improves adhesion, flex strength, abrasion resistance, and workability of modified compounds. DA-1120 can be used in tile adhesives. 收起 | |
| DA-1122 | DCC (Dairen Chemical Corp.) | DA-1122 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and it forms a stable emulsion. DA-1122 improves adhesion, flex strength, abrasion resistance, and workability of modified compounds. DA-1122 ca...展开 DA-1122 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and it forms a stable emulsion. DA-1122 improves adhesion, flex strength, abrasion resistance, and workability of modified compounds. DA-1122 can be used in tile adhesives. 收起 | |
| DA-1126 | DCC (Dairen Chemical Corp.) | DA-1126 is a water re-dispersible powder based on a vinyl acetate/ethylene copolymer based containing polyvinyl alcohol as a protective colloid. DA-1126 improves adhesion, flexibility, plasticity, abrasion resistance and workability of modified compounds....展开 DA-1126 is a water re-dispersible powder based on a vinyl acetate/ethylene copolymer based containing polyvinyl alcohol as a protective colloid. DA-1126 improves adhesion, flexibility, plasticity, abrasion resistance and workability of modified compounds. It is used in ceramic tile adhesives, and EIFS. 收起 | |
| DA-1130 | DCC (Dairen Chemical Corp.) | DA-1130 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1130 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds....展开 DA-1130 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1130 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds. It can be used in tile adhesives. 收起 | |
| DA-1133 | DCC (Dairen Chemical Corp.) | DA-1133 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1133 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds....展开 DA-1133 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1133 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds. DA-1133 is used in construction adhesives. 收起 | |
| DA-117 | DCC (Dairen Chemical Corp.) | DA-117 is a non-plasticized, aqueous, milky, white dispersion of a vinyl acetate-ethylene copolymer with high solid contents developed to provide a versatile base for construction applications. After evaporation of its water content, DA-117 forms a flexib...展开 DA-117 is a non-plasticized, aqueous, milky, white dispersion of a vinyl acetate-ethylene copolymer with high solid contents developed to provide a versatile base for construction applications. After evaporation of its water content, DA-117 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 500-1500 mPa.s. DA-117 is used in joint compounds and decorative coatings, and carpet back coatings. 收起 | |
| DA-1200 | DCC (Dairen Chemical Corp.) | DA-1200 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1200 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds....展开 DA-1200 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1200 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds. DA-1200 is used in tile adhesives. 收起 | |
| DA-1210 | DCC (Dairen Chemical Corp.) | DA-1210 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1210 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds....展开 DA-1210 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1210 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds. DA-1210 is used in construction adhesives, sealing slurries, and repair mortars. 收起 | |
| DA-125 | DCC (Dairen Chemical Corp.) | DA-125 is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. Due to its low Tg at around -8 °C, the dry film remains flexible even at temperatures below 0 °C. In general, DA-125 is used as general adhesive f...展开 DA-125 is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. Due to its low Tg at around -8 °C, the dry film remains flexible even at temperatures below 0 °C. In general, DA-125 is used as general adhesive for packaging, bookbinding, and bonding for plastic films, coated papers. DA-125 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-125 is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-128 | DCC (Dairen Chemical Corp.) | DA-128 is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. Due to its low Tg at around -13°C, the dry film remains flexible even at temperatures below 0 °C. In general, DA-128 is used as general adhesive f...展开 DA-128 is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. Due to its low Tg at around -13°C, the dry film remains flexible even at temperatures below 0 °C. In general, DA-128 is used as general adhesive for packaging, bookbinding, and bonding for plastic films, coated papers. DA-128 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-128 is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-128H | DCC (Dairen Chemical Corp.) | DA-128H is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. Due to its low Tg at around -13 °C, the dry film remains flexible even at temperatures below 0 °C. In general, DA-128H is used as general adhesiv...展开 DA-128H is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. Due to its low Tg at around -13 °C, the dry film remains flexible even at temperatures below 0 °C. In general, DA-128H is used as general adhesive for packaging, bookbinding, and bonding for plastic films, coated papers. DA-128H is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-128H is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-1400 | DCC (Dairen Chemical Corp.) | DA-1400 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1400 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds....展开 DA-1400 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1400 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds. DA-1400 is used in tile adhesives, and sealing slurries. 收起 | |
| DA-1410 | DCC (Dairen Chemical Corp.) | DA-1410 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1410 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds....展开 DA-1410 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1410 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds. DA-1410 is used in construction adhesives. 收起 | |
| DA-1420 | DCC (Dairen Chemical Corp.) | DA-1420 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1420 improves adhesion, flexural strength, plasticity, abrasion resistance, and workability of modified compound...展开 DA-1420 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1420 improves adhesion, flexural strength, plasticity, abrasion resistance, and workability of modified compounds. DA-1420 is used in tile adhesives. 收起 | |
| DA-1430 | DCC (Dairen Chemical Corp.) | DA-1430 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1430 improves adhesion, flex strength, plasticity, abrasion resistance, and workability of modified compounds. D...展开 DA-1430 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1430 improves adhesion, flex strength, plasticity, abrasion resistance, and workability of modified compounds. DA-1430 is used in tile adhesives, and trowelling compounds. 收起 | |
| DA-1450 | DCC (Dairen Chemical Corp.) | DA-1450 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1450 improves adhesion, flex strength, plasticity, abrasion resistance, and workability of modified compounds. D...展开 DA-1450 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1450 improves adhesion, flex strength, plasticity, abrasion resistance, and workability of modified compounds. DA-1450 is used in tile adhesives, and construction adhesives. 收起 | |
| DA-179 | DCC (Dairen Chemical Corp.) | DA-179 is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. The soft, flexible polymer makes use of a surfactant protection system to provide excellent water resistance and soft, flexible films. DA-179 is u...展开 DA-179 is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. The soft, flexible polymer makes use of a surfactant protection system to provide excellent water resistance and soft, flexible films. DA-179 is used in high performance waterproof coatings. 收起 | |
| DA-180L | DCC (Dairen Chemical Corp.) | DA-180L is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. After the evaporation of its water content, DA-180L dries to a clear, soft and flexible film to provide a better waterproofing property. DA-180L ...展开 DA-180L is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. After the evaporation of its water content, DA-180L dries to a clear, soft and flexible film to provide a better waterproofing property. DA-180L is used in general adhesives. 收起 | |
| DA-183 | DCC (Dairen Chemical Corp.) | DA-183 is a vinyl acetate-ethylene copolymer emulsion for cement or plaster based mortars. The addition causes of DA-183 increases the adhesion of mortars to other mineral surfaces. These modified coatings show much better elasticity. DA-183 is used in mo...展开 DA-183 is a vinyl acetate-ethylene copolymer emulsion for cement or plaster based mortars. The addition causes of DA-183 increases the adhesion of mortars to other mineral surfaces. These modified coatings show much better elasticity. DA-183 is used in mortars or grouts. 收起 | |
| DA-265 | DCC (Dairen Chemical Corp.) | DA-265 is a non-plasticized, aqueous, milky, white vinyl acetate-ethylene-acrylate terpolymer emulsion with a solid content of 65%. After drying, a water-resistant, clear and flexible film is formed, exhibiting stability against degradation, discoloration...展开 DA-265 is a non-plasticized, aqueous, milky, white vinyl acetate-ethylene-acrylate terpolymer emulsion with a solid content of 65%. After drying, a water-resistant, clear and flexible film is formed, exhibiting stability against degradation, discoloration by UV-light, oxygen and the ozone. DA-265 is used in mineral coatings, and floor, wall, or ceiling adhesives. . 收起 | |
| DA-265H | DCC (Dairen Chemical Corp.) | DA-265H is a non-plasticized, aqueous, milky, white vinyl acetate-ethylene-acrylate terpolymer emulsion with a solid content of 65%. A water-resistant, clear and flexible film is formed after drying. This film exhibits stability against degradation, disco...展开 DA-265H is a non-plasticized, aqueous, milky, white vinyl acetate-ethylene-acrylate terpolymer emulsion with a solid content of 65%. A water-resistant, clear and flexible film is formed after drying. This film exhibits stability against degradation, discoloration, oxygen, and the ozone. Because of DA-265H's adjusted ethylene content, this film is extremely tacky and uses no plasticizers to get softness or flexibility. DA-265H is used in mineral coatings, and floor, wall, or ceiling adhesives. 收起 | |
| DA-310 | DCC (Dairen Chemical Corp.) | DA-310 is a non-plasticized, aqueous, milky, white vinyl acetate-ethylene copolymer emulsion containing incorporated carboxylic groups. It exhibits VAE emulsion properties together with increased adhesion to metals, like aluminum. DA-310 is used for seali...展开 DA-310 is a non-plasticized, aqueous, milky, white vinyl acetate-ethylene copolymer emulsion containing incorporated carboxylic groups. It exhibits VAE emulsion properties together with increased adhesion to metals, like aluminum. DA-310 is used for sealing plastics or metals to other substrates, and as a raw material for adhesives. 收起 | |
| DA-3510 | DCC (Dairen Chemical Corp.) | DA-3510 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. This resin is soft and flexible, because of its relatively high ethylene content. DA-3510 enhances the adhesion, fle...展开 DA-3510 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. This resin is soft and flexible, because of its relatively high ethylene content. DA-3510 enhances the adhesion, flexural strength, plasticity, and workability of modified compounds. DA-3510 is recommended for use as a sole binder for making construction adhesives and seals. 收起 | |
| DA-371 | DCC (Dairen Chemical Corp.) | DA-371 is an aqueous, non-plasticized, milky white emulsion synthesized from vinyl acetate and ethylene. DA-371 with different paint formulations can bring about many changes of the gloss of indoor-paints in accordance with the customers’ demand. DA-371 i...展开 DA-371 is an aqueous, non-plasticized, milky white emulsion synthesized from vinyl acetate and ethylene. DA-371 with different paint formulations can bring about many changes of the gloss of indoor-paints in accordance with the customers’ demand. DA-371 is used in low VOC interior paints, semi flat and semi gloss paints, deep shade paints, exterior paints, and plaster and textured coatings. 收起 | |
| DA-500 | DCC (Dairen Chemical Corp.) | DA-500 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-500 forms a flexible film with adhesive properties for a broad range of applications. DA-500 is used in...展开 DA-500 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-500 forms a flexible film with adhesive properties for a broad range of applications. DA-500 is used in base for EPI wood glue systems, as a base emulsion for floor, wall or ceiling adhesives, and plastic (PVC) or metal foil bonding. 收起 | |
| DA-502 | DCC (Dairen Chemical Corp.) | DA-502 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-502 forms a flexible film with adhesive properties for a broad range of applications. It has a viscosit...展开 DA-502 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-502 forms a flexible film with adhesive properties for a broad range of applications. It has a viscosity at 25 °C of 3000-4000 mPa.s. DA-502 is used in base for EPI wood glue systems, as a base emulsion for floor, wall or ceiling adhesives, and plastic (PVC) or metal foil bonding. 收起 | |
| DA-511 | DCC (Dairen Chemical Corp.) | DA-511 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-511 forms a flexible film with adhesive properties for a broad range of applications. It has a viscosit...展开 DA-511 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-511 forms a flexible film with adhesive properties for a broad range of applications. It has a viscosity at 25 °C of 1500-2500 mPa.s. DA-511 is used in base for EPI wood glue systems, as a base emulsion for floor, wall or ceiling adhesives, and plastic (PVC) or metal foil bonding. 收起 | |
| DA-523 | DCC (Dairen Chemical Corp.) | DA-523 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-523 forms a flexible film with adhesive properties for a broad range of applications. It has a viscosit...展开 DA-523 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-523 forms a flexible film with adhesive properties for a broad range of applications. It has a viscosity at 25 °C of 700-1000 mPa.s. DA-523 is used in base for EPI wood glue systems, as a base emulsion for floor, wall or ceiling adhesives, and plastic (PVC) or metal foil bonding. 收起 | |
| DA-524 | DCC (Dairen Chemical Corp.) | DA-524 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-524 forms a tough but still flexible film with adhesive properties for a broad range of applications. I...展开 DA-524 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-524 forms a tough but still flexible film with adhesive properties for a broad range of applications. It has a viscosity at 25 °C of 1500-2500 mPa.s. DA-524 is used in base for EPI wood glue systems, as a base emulsion for floor, wall or ceiling adhesives, and plastic (PVC) or metal foil bonding. 收起 | |
| DA-6200 | DCC (Dairen Chemical Corp.) | DA-6200 is a water re-dispersible powder based on vinyl acetate/ethylene copolymer containing polyvinyl alcohol as a protective colloid. DA-6200 contains a fine mineral filler as an anti-blocking agent. It is free of solvents, plasticizers and film-formin...展开 DA-6200 is a water re-dispersible powder based on vinyl acetate/ethylene copolymer containing polyvinyl alcohol as a protective colloid. DA-6200 contains a fine mineral filler as an anti-blocking agent. It is free of solvents, plasticizers and film-forming agents. DA-6200 is recommended for blending with inorganic binders such as cement, hydrated lime to modify mortar hydration systems, tile adhesives, EIFS, and finishing plasters. 收起 | |
| DA-652 | DCC (Dairen Chemical Corp.) | DA-652 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, the extra viscous DA-652 forms a flexible film with adhesive properties for a broad range of applications....展开 DA-652 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, the extra viscous DA-652 forms a flexible film with adhesive properties for a broad range of applications. It has a viscosity at 25 °C of 15000-25000 mPa.s. DA-652 is used as base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-691 | DCC (Dairen Chemical Corp.) | DA-691 is a non-plasticized, aqueous, milky white, cross-linkable copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-691 forms a flexible and soft film. It has a viscosity at 25 °C of 100-500 mPa.s. DA-691...展开 DA-691 is a non-plasticized, aqueous, milky white, cross-linkable copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-691 forms a flexible and soft film. It has a viscosity at 25 °C of 100-500 mPa.s. DA-691's main use is in EPI wood glue. 收起 | |
| DA-901 | DCC (Dairen Chemical Corp.) | DA-901 is a non-plasticized, aqueous, milky white terpolymer dispersion based on vinyl chloride, vinyl acetate and ethylene. Due to it's low Tg levels it provides a soft transparent film. It is generally used as an adhesive and provides a fire retardant p...展开 DA-901 is a non-plasticized, aqueous, milky white terpolymer dispersion based on vinyl chloride, vinyl acetate and ethylene. Due to it's low Tg levels it provides a soft transparent film. It is generally used as an adhesive and provides a fire retardant property. DA-901 is used as a general adhesive and is specially suitable for wood applications. 收起 | |
| DA-908 | DCC (Dairen Chemical Corp.) | DA-908 is an aqueous, milky white terpolymer dispersion based on vinyl chloride, vinyl acetate and ethylene. DA-908 leads to a clear film with low surface tack, and resistance to water, alkali, solvents, light, and aging. It has a Tg value of 20-30 °C and...展开 DA-908 is an aqueous, milky white terpolymer dispersion based on vinyl chloride, vinyl acetate and ethylene. DA-908 leads to a clear film with low surface tack, and resistance to water, alkali, solvents, light, and aging. It has a Tg value of 20-30 °C and is a cloudy substance initially. DA-908 is used as a base emulsion for general adhesives and EPI wood adhesives. 收起 | |
| DA-910 | DCC (Dairen Chemical Corp.) | DA-910 is a copolymer of Ethylene and Vinyl Chloride with amide functionality. It has fire retardant, water, and alkali resistance properties. It has a Tg rating of between -2 and 2 °C. DA-910 can be used as a base sealant emulsion in non-woven fabrics an...展开 DA-910 is a copolymer of Ethylene and Vinyl Chloride with amide functionality. It has fire retardant, water, and alkali resistance properties. It has a Tg rating of between -2 and 2 °C. DA-910 can be used as a base sealant emulsion in non-woven fabrics and paper binder, paper and fabric impregnation binder, flocking binder, car sheet and carpet back coating, and adhesive for high frequency curing. 收起 | |
| DA-920 | DCC (Dairen Chemical Corp.) | DA-920 is a copolymer of Ethylene and Vinyl Chloride with amide functionality. It has fire retardant, water, and alkali resistance properties. It has a Tg rating of between 18 and 22 °C. DA-920 can be used as a base sealant emulsion in non-woven fabrics a...展开 DA-920 is a copolymer of Ethylene and Vinyl Chloride with amide functionality. It has fire retardant, water, and alkali resistance properties. It has a Tg rating of between 18 and 22 °C. DA-920 can be used as a base sealant emulsion in non-woven fabrics and paper binder, paper and fabric impregnation binder, flocking binder, car sheet and carpet back coating, and adhesive for high frequency curing. 收起 | |
| DA-930 | DCC (Dairen Chemical Corp.) | DA-930 is a copolymer of Ethylene and Vinyl Chloride with amide functionality. It has fire retardant, water, and alkali resistance properties. It has a Tg rating of between 28 and 32 °C. DA-930 can be used as a base sealant emulsion in non-woven fabrics a...展开 DA-930 is a copolymer of Ethylene and Vinyl Chloride with amide functionality. It has fire retardant, water, and alkali resistance properties. It has a Tg rating of between 28 and 32 °C. DA-930 can be used as a base sealant emulsion in non-woven fabrics and paper binder, paper and fabric impregnation binder, flocking binder, car sheet and carpet back coating, and adhesive for high frequency curing. 收起 | |
| HESS NCS-10 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-10 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-10 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-12 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-12 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-12 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-15 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-15 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-15 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-3 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-3 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-3 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-5 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-5 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-5 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-8 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-8 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-8 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| n-Propanol | DCC (Dairen Chemical Corp.) | n-Propanol is a by-product which is produced by hydro-formulation and hydrogenation of Allyl Alcohol, carbon monoxide, and hydrogen. It is a medium boiling point, colorless liquid and has a typical alcohol odor, and is soluble in water, alcohol, and ether...展开 n-Propanol is a by-product which is produced by hydro-formulation and hydrogenation of Allyl Alcohol, carbon monoxide, and hydrogen. It is a medium boiling point, colorless liquid and has a typical alcohol odor, and is soluble in water, alcohol, and ether. n-Propanol is used in solvents, as an intermediate chemical for synthesis, industrial coatings, adhesives, and printing inks. 收起 | |
| PIGMENT BLUE 15:6(C.I.NO.:PB15:6,PIGMENT BLUE 15:6) | Shanghai Honor Industrial Co., LTD | C.I.NO.:PB15:6,PIGMENT BLUE 15:6 is the modification of copper phthalocyanine. It affords the reddest blue shade provided by any copper phthalocyanine blue pigment. In recent years it has become possible to sufficiently stabilize these pigments towards ch...展开 C.I.NO.:PB15:6,PIGMENT BLUE 15:6 is the modification of copper phthalocyanine. It affords the reddest blue shade provided by any copper phthalocyanine blue pigment. In recent years it has become possible to sufficiently stabilize these pigments towards change of modification in order to largely eliminate undesirable coloristic effects in application. In terms of fastness properties, C.I.NO.:PB15:6,PIGMENT BLUE 15:6 performs like other modifications. In baking enamels, stabilized types are completely fast to overcoating, but they are not entirely fast to bleeding in plasticized PVC. 收起 | |
| PIGMENT BLUE 60(C.I.NO.:PB60,PIGMENT BLUE 60) | Shanghai Honor Industrial Co., LTD | C.I.NO.:PB60,PIGMENT BLUE 60 is an Indanthrone pigment which demonstrates excellent weatherfastness. Most grades of this pigment, like other commercial vat type pigments, provide good transparency. They are primarily applied in automotive finishes, especi...展开 C.I.NO.:PB60,PIGMENT BLUE 60 is an Indanthrone pigment which demonstrates excellent weatherfastness. Most grades of this pigment, like other commercial vat type pigments, provide good transparency. They are primarily applied in automotive finishes, especially in metallic finishes. It is highly durable even in light white reductions, and shows very good fastness to organic solvents, including alcohols, esters, and ketones, aromatic and aliphatic hydrocarbons, and various types of plasticizers. This product may also be employed in plastics, rubber, and elastomers. 收起 | |
| PIGMENT BULE 15:2(C.I.NO.;PB15:2,PIGMENT BLUE 15:2) | Shanghai Honor Industrial Co., LTD | C.I.NO.:PB15:2,PIGMENT BLUE 15:2 encompasses a number of Copper Phthalocyanine types which are stabilized towards flocculation and change of modification. Their main area of application is in paints. In accordance with its good fastness to flocculation, C...展开 C.I.NO.:PB15:2,PIGMENT BLUE 15:2 encompasses a number of Copper Phthalocyanine types which are stabilized towards flocculation and change of modification. Their main area of application is in paints. In accordance with its good fastness to flocculation, C.I.NO.:PB15:2,PIGMENT BLUE 15:2 demonstrates good resistance to rub-out in most common binder systems. Other fastness properties in application largely equal those of P.B.15:1. In printing inks, C.I.NO.:PB15:2,PIGMENT BLUE 15:2 is employed mostly in special gravure and flexographic inks. 收起 | |
| PIGMENT BULE 15:4(C.I.NO.;PB15:4,PIGMENT BLUE 15:4) | Shanghai Honor Industrial Co., LTD | C.I.NO.:PB15:4,PIGMENT BLUE 15:4 is a Copper Phthalocyanine Blue pigment designated in the the Colour Index. It is stabilized towards flocculation, and shows largely the same coloristic and fastness properties as C.I.NO.:PB15:3,PIGMENT BLUE 15:3 types, bu...展开 C.I.NO.:PB15:4,PIGMENT BLUE 15:4 is a Copper Phthalocyanine Blue pigment designated in the the Colour Index. It is stabilized towards flocculation, and shows largely the same coloristic and fastness properties as C.I.NO.:PB15:3,PIGMENT BLUE 15:3 types, but often exhibits much better rheology. As with stabilized Copper Phthalocyanine Blue types, stabilization through surface treatment has proven to decrease the solvent fastness of Copper Phthalocyanine Blue, sometimes considerably so, making the pigment more sensitive to aromatics, alcohols, ethylene glycol, and ketones. This product is an attractive choice for oven drying paints, and is also recommended for gravure printing inks. 收起 | |
| PIGMENT GREEN 7 | Shanghai Honor Industrial Co., LTD | PIGMENT GREEN 7, C.I.NO.PG7是一种有蓝色阴影的酞菁绿颜料。它主要用于工业涂料，建筑涂料和粉末涂料，打印油墨和塑料中。这款产品具有出色的色牢度和良好的热稳定性。 | |
| PIGMENT ORANGE 13 | Shanghai Honor Industrial Co., LTD | PIGMENT ORANGE 13 含有C.I.NO. PO13。它与C.I.NO.:PO34，PIGMENT ORANGE 34有十分相似的颜色性，但一般更加偏黄一些。C.I.NO.:PO13, PIGMENT ORANGE 13的应用产品中聚烯烃含量很有限。此颜料是很快的清洁剂。它也被用于粘性旋转染色以及原浆染色。在图像行业，从另一方面说，使用C.I.NO.:PO13, PIGMENT ORANGE 13到一定程度用于包装印刷油墨。其耐光度比较均衡但是对一些有机溶剂色素的稳定性是极好的或近乎完美的。同...展开 PIGMENT ORANGE 13 含有C.I.NO. PO13。它与C.I.NO.:PO34，PIGMENT ORANGE 34有十分相似的颜色性，但一般更加偏黄一些。C.I.NO.:PO13, PIGMENT ORANGE 13的应用产品中聚烯烃含量很有限。此颜料是很快的清洁剂。它也被用于粘性旋转染色以及原浆染色。在图像行业，从另一方面说，使用C.I.NO.:PO13, PIGMENT ORANGE 13到一定程度用于包装印刷油墨。其耐光度比较均衡但是对一些有机溶剂色素的稳定性是极好的或近乎完美的。同样，此油墨在石蜡，植物酯和脂肪酸盐应用迅速。它们热稳定性强，能高达200°C。C.I.NO.:PO13, PIGMENT ORANGE 13也被用于金属装饰涂装，提供适合的耐光性。同样，它对清洁的漆层有抵抗性，杀菌能力也是很好的。 收起 | |
| PIGMENT ORANGE 16 | Shanghai Honor Industrial Co., LTD | PIGMENT ORANGE 16也被称为Dianisidine Orange。它呈黄橙色，比P.O.13和34红。PIGMENT ORANGE 16应用的主要领域在打印油墨行业。这种颜料专门用于调整P.Y.12型苯胺黄色颜料的色调。为了提供更好的透明度还生产了树脂处理类型。PIGMENT ORANGE 16不耐光也并不耐用，不适合用于涂料。但是由于它成本较低，使其适用于橡胶和纺织印刷的着色剂。 | |
| PIGMENT ORANGE 34(C.I.NO.:PO34,PIGMENT ORANGE 34) | Shanghai Honor Industrial Co., LTD | C.I.NO.:PO34,PIGMENT ORANGE 34 is supplied in a variety of types, which differ considerably in their particle size distributions. Specific surface areas range from 15 m2/g in highly opaque versions to about 75 m2/g in transparent types. Transparent C.I.NO...展开 C.I.NO.:PO34,PIGMENT ORANGE 34 is supplied in a variety of types, which differ considerably in their particle size distributions. Specific surface areas range from 15 m2/g in highly opaque versions to about 75 m2/g in transparent types. Transparent C.I.NO.:PO34,PIGMENT ORANGE 34 versions represent the most frequent choice for printing inks as they provide a clean, yellowish orange hue and high tinctorial strength. This product is also used in textiles and plastics to a certain extent. 收起 | |
| PIGMENT ORANGE 36, C.I.NO.: PO36 | Shanghai Honor Industrial Co., LTD | PIGMENT ORANGE 36, C.I.NO.: PO36, red shade orange, HP Orange 3633,an Benzimidazolone Pigments, with excellent light fastness, weather fastness, solvent fastness, and opaque organic pigments, used for industrial and automotive coatings, packaging inks, me...展开 PIGMENT ORANGE 36, C.I.NO.: PO36, red shade orange, HP Orange 3633,an Benzimidazolone Pigments, with excellent light fastness, weather fastness, solvent fastness, and opaque organic pigments, used for industrial and automotive coatings, packaging inks, metal inks. 收起 | |
| PIGMENT ORANGE 38 (C.I.NO.:PO38, PIGMENT ORANGE 38) | Shanghai Honor Industrial Co., LTD | PIGMENT ORANGE 38是一种黄色调红色，主要用于打印油墨和塑料中。它显示出良好的牢度，适用于胶印油墨以及金属装饰印刷。塑料行业主要使用P.O.38为PVC，聚烯烃和聚苯乙烯着色。在涂料行业中，这种颜料有出色的耐溶剂性，可以在高档工业涂料等对于光牢度和耐用性要求不太苛刻的应用中使用。 | |
| PIGMENT ORANGE 71, C.I.NO.71, DPP Orange - HP ORANGE 3349 | Shanghai Honor Industrial Co., LTD | PIGMENT ORANGE 71,C.I.NO.71, DPP orange pigments is a medium orange pigment. It is mainly used for plastic color concentrate, in HDPE, PP AND PVC resins. This product has perfect migration-resistance properties, and heat resistance up to 300 degrees. It i...展开 PIGMENT ORANGE 71,C.I.NO.71, DPP orange pigments is a medium orange pigment. It is mainly used for plastic color concentrate, in HDPE, PP AND PVC resins. This product has perfect migration-resistance properties, and heat resistance up to 300 degrees. It is also used in printing inks with perfect solvent fastness and light-fastness and weather fastness. 收起 | |
| PIGMENT ORANGE 73, C.I.NO.73-HP ORANGE 3642 | Shanghai Honor Industrial Co., LTD | PIGMENT ORANGE 73,C.I.NO.73, DPP orange, Orange 3642 is recommended for high grade industrial paints, like OEM, Solvent stove paints, powder coatings and Coil coatings. | |
| PIGMENT RED 112 | Shanghai Honor Industrial Co., LTD | PIGMENT RED 112 是一种十分好的中度红色颜料，混合了C.I. No. PR112。它的主要应用市场包括油墨印刷，抛光剂及涂料；但它也被用于其他一些领域。印刷油墨领域使用此产品主要在凸版印刷和平板印刷，凹版包装印刷油墨，柔性油墨。它的着色力很强。此颜料显现出了极好的耐光性。本产品极易溶于脂肪酸盐中，虽然它完全不能溶于石蜡，只是仅仅微溶于黄油及其它油脂类（步骤3）。它们也被干净漆涂层影响和具有杀菌作用。 在油漆中，PIGMENT RED 112 产生了类似红色的颜色。它或许能被使用到，但绝...展开 PIGMENT RED 112 是一种十分好的中度红色颜料，混合了C.I. No. PR112。它的主要应用市场包括油墨印刷，抛光剂及涂料；但它也被用于其他一些领域。印刷油墨领域使用此产品主要在凸版印刷和平板印刷，凹版包装印刷油墨，柔性油墨。它的着色力很强。此颜料显现出了极好的耐光性。本产品极易溶于脂肪酸盐中，虽然它完全不能溶于石蜡，只是仅仅微溶于黄油及其它油脂类（步骤3）。它们也被干净漆涂层影响和具有杀菌作用。 在油漆中，PIGMENT RED 112 产生了类似红色的颜色。它或许能被使用到，但绝不仅限于空气干燥漆之中，而且在烘烤搪瓷中，提供了合适的条件以避免爆裂。烘烤温度介于140-160°C 之间，浓度阈值为0.1%；介于180-200°C，极限位2.5%。其耐涂性不尽人意。但耐光性和耐环境性十分优异，甚至减少了白色。优异的牢固性能使得该产品适用于高级涂料，比如汽车漆及其他普通工业涂料。电泳漆是一种特殊用途的涂料，在乳胶漆中也有其特殊的用途，尽管它在外观上的固定性相对较差。 收起 | |
| PIGMENT RED 12 | Shanghai Honor Industrial Co., LTD | PIGMENT RED 12 是其中一种更为重要的波尔多有色材料，混合了C.I. No. PR12。印刷行业在平版印刷，凹版包装印刷和柔性水墨中广泛使用了PIGMENT RED 12。此颜料十分的耐晒而不褪色。它显示出很高的着色强度；对溶剂及其他的媒介的印刷牢度很适度。印刷品会受石蜡、黄油及其他的因素影响。PIGMENT RED 12 同样相似的对碱很敏感。 纺织品印刷使用PIGMENT RED 12 绝对的耐晒且不褪色。它能够承受最高达150°C的高温；甚至到了180°C，此颜料可保持其初始颜色值。涂...展开 PIGMENT RED 12 是其中一种更为重要的波尔多有色材料，混合了C.I. No. PR12。印刷行业在平版印刷，凹版包装印刷和柔性水墨中广泛使用了PIGMENT RED 12。此颜料十分的耐晒而不褪色。它显示出很高的着色强度；对溶剂及其他的媒介的印刷牢度很适度。印刷品会受石蜡、黄油及其他的因素影响。PIGMENT RED 12 同样相似的对碱很敏感。 纺织品印刷使用PIGMENT RED 12 绝对的耐晒且不褪色。它能够承受最高达150°C的高温；甚至到了180°C，此颜料可保持其初始颜色值。涂料行业主要将其用在干燥漆之中。它仅适用于高浓度配方。特别是在充分和相关的色调中。PIGMENT RED 12 具有相当令人满意的耐光性。此种颜料实际上偶尔也用于其牢度性能符合其规格的乳胶漆中。此产品也有一些特殊的运用， 比如说汽车清洁剂、地板抛光、鞋抛光等，并经常用于将办公用品和皮革染色。 收起 | |
| PIGMENT RED 122, C.I.NO.: PR122 | Shanghai Honor Industrial Co., LTD | PIGMENT RED 122,C.I.NO.: PR122, HP Red 26120 is a Quinacridone pigments with color index number pigment red 122, C.I.NO.: PR122, this is belong to Quinacridone group, with excellent anti-migration and heat stability property, and blue shade red or Pink co...展开 PIGMENT RED 122,C.I.NO.: PR122, HP Red 26120 is a Quinacridone pigments with color index number pigment red 122, C.I.NO.: PR122, this is belong to Quinacridone group, with excellent anti-migration and heat stability property, and blue shade red or Pink color. Is mainly used for high quality coatings, inks and plastics. 收起 |
