| 1257 Superfast Yellow 10G | Shanghai Honor Industrial Co., LTD | 1257 Superfast Yellow 10G is Pigment Yellow 3, C.I.No. PY3, also known as Hansa Yellow 10G and Arylide Yellow 10G. It has a strong greenish shade, has lower surface area, good opacity, and excellent lightfastness. This product can be used for air-drying p...展开 1257 Superfast Yellow 10G is Pigment Yellow 3, C.I.No. PY3, also known as Hansa Yellow 10G and Arylide Yellow 10G. It has a strong greenish shade, has lower surface area, good opacity, and excellent lightfastness. This product can be used for air-drying paints, latex paints, textile paste and printing inks. 收起 | |
| 1260 SuperFast Yellow RNG | Shanghai Honor Industrial Co., LTD | 1260 SuperFast Yellow RNG是一种有出色分散性的黄绿色粉末。它推荐用于道路标线涂料和工业涂料。 | |
| 1,4-Butanediol (1,4-BDO) | DCC (Dairen Chemical Corp.) | 1,4-Butanediol (1,4-BDO) is produced by hydro-formulation and hydrogenation of Allyl Alcohol, carbon monoxide and hydrogen. 1,4-Butanediol is a colorless, high-boiling liquid with a low order of toxicity. 1,4-Butanediol is used as a raw material for manuf...展开 1,4-Butanediol (1,4-BDO) is produced by hydro-formulation and hydrogenation of Allyl Alcohol, carbon monoxide and hydrogen. 1,4-Butanediol is a colorless, high-boiling liquid with a low order of toxicity. 1,4-Butanediol is used as a raw material for manufacturing carrier solvent in printing ink, and is a key component of hot melt adhesive. 收起 | |
| 2-Methyl-1,3-Propanediol | DCC (Dairen Chemical Corp.) | 2-Methyl-1,3-Propanediol is a by-product, which is produced by hydro-formulation and hydro-generation of Allyl Alcohol, carbon monoxide, and hydrogen. It is a colorless, low viscosity and toxic liquid with a unique molecular structure. 2-Methyl-1,3-Propan...展开 2-Methyl-1,3-Propanediol is a by-product, which is produced by hydro-formulation and hydro-generation of Allyl Alcohol, carbon monoxide, and hydrogen. It is a colorless, low viscosity and toxic liquid with a unique molecular structure. 2-Methyl-1,3-Propanediol is used as a raw material in monomers for the preparation of coatings and binders. 收起 | |
| Alkoxylated 2-Methyl-1,3-Propanediol | DCC (Dairen Chemical Corp.) | Alkoxylated 2-Methyl-1,3-Propanediol is produced by Alkoxylation of 2-Methyl-1,3-Propanediol and Alkoxide. It is a colorless liquid with two primary hydroxyls. Alkoxylated 2-Methyl-1,3-Propanediol is used as a raw material in printing inks, adhesives, and...展开 Alkoxylated 2-Methyl-1,3-Propanediol is produced by Alkoxylation of 2-Methyl-1,3-Propanediol and Alkoxide. It is a colorless liquid with two primary hydroxyls. Alkoxylated 2-Methyl-1,3-Propanediol is used as a raw material in printing inks, adhesives, and paints. 收起 | |
| BIOPOL BR 14 | Chemipol | BIOPOL BR 14 is a broad range in-can preservative based on BRONOPOL, specifically designed to avoid bacterial growth and damage caused by microorganisms in waterborne technical products. BIOPOL BR 14 is a cost-effective product with a broad range of activ...展开 BIOPOL BR 14 is a broad range in-can preservative based on BRONOPOL, specifically designed to avoid bacterial growth and damage caused by microorganisms in waterborne technical products. BIOPOL BR 14 is a cost-effective product with a broad range of activity. The preservative product is suitable for plastic paints, fillers, emulsions, glues, adhesives, sealants, and detergents. BIOPOL BR 14 does not release formaldehyde. BIOPOL BR 14 is stable in a broad range of pH and temperatures. BIOPOL BR 14 is fully soluble in water and most of the polar solvents. 收起 | Request Sample |
| BIOPOL BR 30 | Chemipol | BIOPOL BR 30 is a broad range in-can preservative based on BRONOPOL, specifically designed to avoid bacterial growth and damage caused by microorganisms in waterborne technical products. BIOPOL BR 14 is a cost-effective product with a broad range of activ...展开 BIOPOL BR 30 is a broad range in-can preservative based on BRONOPOL, specifically designed to avoid bacterial growth and damage caused by microorganisms in waterborne technical products. BIOPOL BR 14 is a cost-effective product with a broad range of activity. The preservative product is suitable for plastic paints, fillers, emulsions, glues, adhesives, sealants, and detergents. BIOPOL BR 30 does not release formaldehyde. BIOPOL BR 30 is stable in a broad range of pH and temperatures. BIOPOL BR 30 is fully soluble in water and most of the polar solvents. 收起 | Request Sample |
| BIOPOL BR 50 | Chemipol | BIOPOL BR 50 is a broad range in-can preservative based on CMIT/MIT and (Benzyloxy)Methanol, specifically designed to avoid bacterial growth and damage caused by microorganisms in waterborne technical products. Preservative product is suitable for plastic...展开 BIOPOL BR 50 is a broad range in-can preservative based on CMIT/MIT and (Benzyloxy)Methanol, specifically designed to avoid bacterial growth and damage caused by microorganisms in waterborne technical products. Preservative product is suitable for plastic paints, fillers, emulsions, glues, adhesives, sealants, and detergents. BIOPOL BR 50 is a cost-effective preservative with a broad range of activity. BIOPOL BR 50 is an AOX & Formaldehyde free preservative. BIOPOL BR 50 is stable in a broad range of pH and temperatures. Especially appropriate for warm weather zones. 收起 | Request Sample |
| BIOPOL C 15 | Chemipol | BIOPOL C 15 is a broad range in-can preservative based on CMIT/MIT adsorbed on Caolin, specifically designed to avoid bacterial growth and damage caused by microorganisms in waterborne technical products. Preservative product is suitable for plastic paint...展开 BIOPOL C 15 is a broad range in-can preservative based on CMIT/MIT adsorbed on Caolin, specifically designed to avoid bacterial growth and damage caused by microorganisms in waterborne technical products. Preservative product is suitable for plastic paints, fillers, emulsions, glues, adhesives, sealants, and detergents. BIOPOL C 15 is formulated in powder form and it is AOX & VOC free. It is a formaldehyde free, cost-effective preservative. Especially appropriate for warm weather zones. As the preservative is water dispersible, it is not recommended for transparent products. 收起 | Request Sample |
| BIOPOL FI 31 | Chemipol | BIOPOL FI 31 is a broad range in-can preservative based on CMIT/MIT and formaldehyde, specifically designed to avoid microbial growth and damage caused by microorganisms in waterborne technical products. BIOPOL FI 31 is a cost-effective preservative. Its ...展开 BIOPOL FI 31 is a broad range in-can preservative based on CMIT/MIT and formaldehyde, specifically designed to avoid microbial growth and damage caused by microorganisms in waterborne technical products. BIOPOL FI 31 is a cost-effective preservative. Its balanced composition guarantees long-term preservation and quick biocidal action. The preservative product is suitable for plastic paints, fillers, emulsions, glues, adhesives, sealants, and detergents. BIOPOL FI 31 is stable in a broad range of pH and temperatures. 收起 | Request Sample |
| BIOPOL IB 61 | Chemipol | BIOPOL IB 61 is a broad range in-can preservative based on CMIT/MIT and Bronopol, specifically designed to avoid microbial growth and damage caused by microorganisms in waterborne technical products. Preservative product suitable for plastic paints, fille...展开 BIOPOL IB 61 is a broad range in-can preservative based on CMIT/MIT and Bronopol, specifically designed to avoid microbial growth and damage caused by microorganisms in waterborne technical products. Preservative product suitable for plastic paints, fillers, emulsions, glues, adhesives, sealants and detergents. VOC-free product. BIOPOL IB 61 balanced composition guarantees a long-term preservative action and a quick biocidal activity. BIOPOL IB 61 is stable in a broad range of pH and temperatures. Preservative especially well-suited form warm weather zones. 收起 | Request Sample |
| BIOPOL ITS | Chemipol | BIOPOL ITS is a broad range in-can preservative based on CMIT/MIT, specifically designed to avoid microbial growth and damage caused by microorganisms in waterborne technical products. Preservative product suitable for plastic paints, fillers, emulsions, ...展开 BIOPOL ITS is a broad range in-can preservative based on CMIT/MIT, specifically designed to avoid microbial growth and damage caused by microorganisms in waterborne technical products. Preservative product suitable for plastic paints, fillers, emulsions, glues, adhesives, sealants, and detergents. BIOPOL ITS is VOC & AOX & Formaldehyde free preservative. BIOPOL ITS has a broad range of activity and top stability under high temperatures, until 50ºC. 收起 | Request Sample |
| BIOPOL JL 101R | Chemipol | BIOPOL JL 101R is a broad range in-can preservative based on O-formal, specifically designed to avoid microbial growth and damage caused by microorganisms in waterborne technical products. Preservative product suitable for plastic paints, fillers, emulsio...展开 BIOPOL JL 101R is a broad range in-can preservative based on O-formal, specifically designed to avoid microbial growth and damage caused by microorganisms in waterborne technical products. Preservative product suitable for plastic paints, fillers, emulsions, glues, adhesives, sealants, and detergents. BIOPOL JL 101R is a cost-effective preservative with fast biocidal activity. BIOPOL JL 101R is effective throughout a wide range of pH and temperatures. CMIT/MIT free preservative. Preservatives are especially appropriate for warm weather zones. 收起 | Request Sample |
| BIOPOL JL 75 | Chemipol | BIOPOL JL 75 is a broad range in-can preservative based on N-formal, specifically designed to avoid microbial growth and damage caused by microorganisms in waterborne technical products. Preservative product suitable for plastic paints, fillers, emulsions...展开 BIOPOL JL 75 is a broad range in-can preservative based on N-formal, specifically designed to avoid microbial growth and damage caused by microorganisms in waterborne technical products. Preservative product suitable for plastic paints, fillers, emulsions, glues, adhesives, sealants, and detergents. BIOPOL JL 75 is a cost-effective preservative with fast biocidal activity. BIOPOL JL 75 is effective throughout a wide range of pH and temperatures. 收起 | Request Sample |
| BIOPOL JM 140L | Chemipol | BIOPOL JM 140L is a broad range in-can preservative based on CMIT/MIT and O-formal, specifically designed to avoid microbial growth and damage caused by microorganisms in waterborne technical products. BIOPOL JM 140L is a cost-effective preservative with ...展开 BIOPOL JM 140L is a broad range in-can preservative based on CMIT/MIT and O-formal, specifically designed to avoid microbial growth and damage caused by microorganisms in waterborne technical products. BIOPOL JM 140L is a cost-effective preservative with excellent protection of the vapor phase. Preservative product is suitable for plastic paints, fillers, emulsions, glues, adhesives, sealants and detergents. BIOPOL JM 140L is stable in a broad range of pH and temperatures. Especially well-suited form warm weather zones. 收起 | Request Sample |
| BIOPOL JM 15 | Chemipol | BIOPOL JM 15 is a broad range in-can preservative based on CMIT/MIT and O-formal, specifically designed to avoid microbial growth and damage caused by microorganisms in waterborne technical products. BIOPOL JM 15 is a cost-effective preservative with exce...展开 BIOPOL JM 15 is a broad range in-can preservative based on CMIT/MIT and O-formal, specifically designed to avoid microbial growth and damage caused by microorganisms in waterborne technical products. BIOPOL JM 15 is a cost-effective preservative with excellent protection of the vapor phase. Preservative product is suitable for plastic paints, fillers, emulsions, glues, adhesives, sealants and detergents. BIOPOL JM 15 is stable in a broad range of pH and temperatures. Preservatives are especially well-suited for warm weather zones 收起 | Request Sample |
| BIOPOL JM 29 | Chemipol | BIOPOL JM 29 is a broad range in-can preservative based on CMIT/MIT and O-formal, specifically designed to avoid microbial growth and damage caused by microorganisms in waterborne technical products. BIOPOL JM 29 is a cost-effective preservative. BIOPOL J...展开 BIOPOL JM 29 is a broad range in-can preservative based on CMIT/MIT and O-formal, specifically designed to avoid microbial growth and damage caused by microorganisms in waterborne technical products. BIOPOL JM 29 is a cost-effective preservative. BIOPOL JM 29 balanced composition guarantees long-term preservation and a quick biocidal action. Preservative product suitable for plastic paints, fillers, emulsions, glues, adhesives, sealants, and detergents. BIOPOL JM JM 29 is stable in a broad range of pH and temperatures. Preservatives specially well-suited form warm weather zones. 收起 | Request Sample |
| BIOPOL K14 | Chemipol | BIOPOL K14 is a non-oxidizing biocidal product based on CMIT/MIT, specifically designed to avoid microbial growth and damage caused by microorganisms in waterborne technical products. Preservative product suitable for plastic paints, fillers, emulsions, g...展开 BIOPOL K14 is a non-oxidizing biocidal product based on CMIT/MIT, specifically designed to avoid microbial growth and damage caused by microorganisms in waterborne technical products. Preservative product suitable for plastic paints, fillers, emulsions, glues, adhesives, sealants, and detergents. AOX, VOC, CMR, and Formaldehyde free preservatives. Cost-effective product. BIOPOL K14 is stable in a broad range of pH and temperatures. Excellent solution for formaldehyde-sensible products. 收起 | Request Sample |
| BIOPOL KB | Chemipol | BIOPOL KB is a broad range of in-can preservatives based on CMIT/MIT and BIT, specifically designed to avoid microbial growth and damage caused by microorganisms in waterborne technical products. Preservative product is suitable for plastic paints, filler...展开 BIOPOL KB is a broad range of in-can preservatives based on CMIT/MIT and BIT, specifically designed to avoid microbial growth and damage caused by microorganisms in waterborne technical products. Preservative product is suitable for plastic paints, fillers, emulsions, glues, adhesives, sealants, and detergents. AOX & Formaldehyde free preservative. Cost-effective product. BIOPOL KB balanced composition guarantees long-term preservation without skin sensitization (H317) labeling. BIOPOL KB is stable in a broad range of pH and temperatures. Preservative especially appropriate for formaldehyde-sensible products. 收起 | Request Sample |
| BIOPOL KBB | Chemipol | BIOPOL KBB is a broad range of in-can preservatives based on CMIT/MIT, BIT, and BRONOPOL, specifically designed to avoid microbial growth and damage caused by microorganisms in waterborne technical products. The preservative product is suitable for plasti...展开 BIOPOL KBB is a broad range of in-can preservatives based on CMIT/MIT, BIT, and BRONOPOL, specifically designed to avoid microbial growth and damage caused by microorganisms in waterborne technical products. The preservative product is suitable for plastic paints, fillers, emulsions, glues, adhesives, sealants, and detergents. AOX & Formaldehyde free preservative. BIOPOL KBB balanced composition guarantees long-term preservation without skin sensitization (H317) labeling. BIOPOL KBB is stable in a broad range of pH and temperatures. Preservatives are especially appropriate for formaldehyde-sensible products. 收起 | Request Sample |
| BIOPOL KBJ | Chemipol | BIOPOL KBJ is a broad range of in-can preservatives based on CMIT/MIT, BIT, and BRONOPOL, specifically designed to avoid microbial growth and damage caused by microorganisms in waterborne technical products. Preservative products suitable for plastic pain...展开 BIOPOL KBJ is a broad range of in-can preservatives based on CMIT/MIT, BIT, and BRONOPOL, specifically designed to avoid microbial growth and damage caused by microorganisms in waterborne technical products. Preservative products suitable for plastic paints, fillers, emulsions, glues, adhesives, sealants, and detergents. AOX & Formaldehyde free preservative. Cost-effective preservative. BIOPOL KBJ balanced composition guarantees long-term preservation without skin sensitization (EUH208) labeling. BIOPOL KBJ is stable in a broad range of pH and temperatures. Especially appropriate for formaldehyde-sensible products. 收起 | Request Sample |
| BIOPOL KF 15 | Chemipol | BIOPOL KF 15 is a broad range in-can preservative based on OIT and O-formal, specifically designed to avoid microbial growth and damage caused by microorganisms in waterborne technical products. Preservative product is suitable for plastic paints, fillers...展开 BIOPOL KF 15 is a broad range in-can preservative based on OIT and O-formal, specifically designed to avoid microbial growth and damage caused by microorganisms in waterborne technical products. Preservative product is suitable for plastic paints, fillers, emulsions, glues, adhesives, sealants, and detergents. BIOPOL KF 15 balanced composition guarantees long-term preservation and a quick biocidal action. BIOPOL KF 15 is a cost-effective preservative that requires a low dosage. Preservatives are especially well-suited for warm weather zones. 收起 | Request Sample |
| BIOPOL KF 78 | Chemipol | BIOPOL KF 78 is a broad range in-can preservative based on OIT and O-formal, specifically designed to avoid microbial growth and damage caused by microorganisms in waterborne technical products. Preservative products suitable for plastic paints, fillers, ...展开 BIOPOL KF 78 is a broad range in-can preservative based on OIT and O-formal, specifically designed to avoid microbial growth and damage caused by microorganisms in waterborne technical products. Preservative products suitable for plastic paints, fillers, emulsions, glues, adhesives, sealants, and detergents. BIOPOL KF 78 balanced composition guarantees long-term preservation and a quick biocidal action. BIOPOL KF 78 is a cost-effective preservative that requires a low dosage. Preservative especially well-suited for warm weather zones. 收起 | Request Sample |
| BIOPOL MSO 35 | Chemipol | BIOPOL MSO 35 is a broad range in-can preservative based on CMIT/MIT and N-formal, specifically designed to avoid microbial growth and damage caused by microorganisms in waterborne technical products. Preservative products suitable for plastic paints, fil...展开 BIOPOL MSO 35 is a broad range in-can preservative based on CMIT/MIT and N-formal, specifically designed to avoid microbial growth and damage caused by microorganisms in waterborne technical products. Preservative products suitable for plastic paints, fillers, emulsions, glues, adhesives, sealants, and detergents. BIOPOL MSO 35 balanced composition guarantees long-term preservation and a quick biocidal action. BIOPOL MSO 35 is excellent to protect the vapor phase of the product. BIOPOL MSO 35 is stable in a broad range of pH and temperatures. 收起 | Request Sample |
| BIOPOL MSO 40 | Chemipol | BIOPOL MSO 40 is a broad range in-can preservative based on CMIT/MIT and formaldehyde donor, specifically designed to avoid microbial growth and damage caused by microorganisms in waterborne technical products. Preservative product is suitable for plastic...展开 BIOPOL MSO 40 is a broad range in-can preservative based on CMIT/MIT and formaldehyde donor, specifically designed to avoid microbial growth and damage caused by microorganisms in waterborne technical products. Preservative product is suitable for plastic paints, fillers, emulsions, glues, adhesives, sealants, and detergents. BIOPOL MSO 40 balanced composition guarantees a long-term preservation and a quick biocidal action. BIOPOL MSO 40 has a reduced skin sensitization potential. BIOPOL MSO 40 is stable in a broad range of pH and temperatures. 收起 | Request Sample |
| BIOPOL PK 5 | Chemipol | BIOPOL PK 5 is a broad range, solid in-can preservative based on CMIT/MIT and Bronopol adsorbed on Silica, specifically designed to avoid microbial growth and damage caused by microorganisms in waterborne technical products. The preservative product is s...展开 BIOPOL PK 5 is a broad range, solid in-can preservative based on CMIT/MIT and Bronopol adsorbed on Silica, specifically designed to avoid microbial growth and damage caused by microorganisms in waterborne technical products. The preservative product is suitable for plastic paints, fillers, emulsions, glues, adhesives, sealants, and detergents. BIOPOL PK 5 is VOC & AOX free preservative. Its balanced composition guarantees long-term preservation and quick biocidal action. Dust free 收起 | Request Sample |
| BIOPOL TC 3 | Chemipol | BIOPOL TC 3 is a broad range in-can preservative based on CMIT/MIT, specifically designed to avoid microbial growth and damage caused by microorganisms in waterborne technical products. Preservative product suitable for plastic paints, fillers, emulsions,...展开 BIOPOL TC 3 is a broad range in-can preservative based on CMIT/MIT, specifically designed to avoid microbial growth and damage caused by microorganisms in waterborne technical products. Preservative product suitable for plastic paints, fillers, emulsions, glues, adhesives, sealants, and detergents. BIOPOL TC 3 is an AOX & VOC free preservative. BIOPOL TC 3 is free of formaldehyde. Its balanced composition guarantees a long-term preservative action. BIOPOL TC 3 is stable in a broad range of pH and temperatures. Especially appropriate for formaldehyde-sensible products. 收起 | Request Sample |
| BIOPOL TI 158 | Chemipol | BIOPOL TI 158 is a broad range in-can preservative based on CMIT/MIT and O-formal, specifically designed to avoid microbial growth and damage caused by microorganisms in waterborne technical products. The preservative product is suitable for plastic paint...展开 BIOPOL TI 158 is a broad range in-can preservative based on CMIT/MIT and O-formal, specifically designed to avoid microbial growth and damage caused by microorganisms in waterborne technical products. The preservative product is suitable for plastic paints, fillers, emulsions, glues, adhesives, sealants, and detergents. BIOPOL TI 158 is a cost-effective preservative with excellent protection of vapor phase. Its balanced composition guarantees a long-term preservative action. BIOPOL TI 158 is stable in a broad range of pH and temperatures. 收起 | Request Sample |
| BIOPOL TRC 150 | Chemipol | BIOPOL TRC 150 is a broad-range, solid in-can preservative based on MIT and BIT adsorbed in kaolin, specifically designed to avoid microbial growth and damage caused by microorganisms in technical products such as ceramics, glazes, or any aqueous suspensi...展开 BIOPOL TRC 150 is a broad-range, solid in-can preservative based on MIT and BIT adsorbed in kaolin, specifically designed to avoid microbial growth and damage caused by microorganisms in technical products such as ceramics, glazes, or any aqueous suspension susceptible to colonized by bacteria. BIOPOL TRC 150 balanced composition guarantees a long-term preservation action. BIOPOL TRC 150 is a cost-effective preservative effective in a broad range of pH and temperatures. 收起 | Request Sample |
| BIOPOL VR 20 | Chemipol | BIOPOL VR 20 is a broad range in-can preservative based on BIT, specifically designed to avoid microbial growth and damage caused by microorganisms in waterborne technical products. Preservative product suitable for plastic paints, fillers, emulsions, glu...展开 BIOPOL VR 20 is a broad range in-can preservative based on BIT, specifically designed to avoid microbial growth and damage caused by microorganisms in waterborne technical products. Preservative product suitable for plastic paints, fillers, emulsions, glues, adhesives, sealants, and detergents. AOX, VOC, CMIT/MIT, and Formaldehyde free preservatives. Cost-effective product. BIOPOL VR 20 balanced composition guarantees a long-term preservation action. BIOPOL VR 20 is stable in a broad range of pH and temperatures. Preservative especially appropriate for formaldehyde-sensible products 收起 | Request Sample |
| BIOPOL XM | Chemipol | BIOPOL XM is a broad range in-can preservative based on MIT and BIT, specifically designed to avoid microbial growth and damage caused by microorganisms in waterborne technical products. Preservative product suitable for plastic paints, fillers, emulsions...展开 BIOPOL XM is a broad range in-can preservative based on MIT and BIT, specifically designed to avoid microbial growth and damage caused by microorganisms in waterborne technical products. Preservative product suitable for plastic paints, fillers, emulsions, glues, adhesives, sealants, and detergents. AOX & VOC & Formaldehyde free preservative. Cost-effective preservatives are effective throughout a wide range of pH, from 2 to 10. BIOPOL XM balanced composition guarantees a long-term preservation action. Preservatives are especially appropriate for formaldehyde-sensible products. 收起 | Request Sample |
| BIOPOL XMD 5050 | Chemipol | BIOPOL XMD 5050 is a broad range in-can preservative based on MIT/BIT and Bronopol, specifically designed to avoid microbial growth and damage caused by microorganisms in waterborne technical products. Preservative product suitable for plastic paints, fil...展开 BIOPOL XMD 5050 is a broad range in-can preservative based on MIT/BIT and Bronopol, specifically designed to avoid microbial growth and damage caused by microorganisms in waterborne technical products. Preservative product suitable for plastic paints, fillers, emulsions, glues, adhesives, sealants and detergents. BIOPOL XMD 5050 is an AOX & VOC free preservative. BIOPOL XMD 5050 is effective throughout a wide range of pH, from 2 to 10. BIOPOL XMD 5050 is stable in a broad range of pH and temperatures. Preservative specially well-suited for warm weather zones. 收起 | Request Sample |
| BIOPOL XMO 210 | Chemipol | BIOPOL XMO 210 is a broad range in-can preservative based on MIT and BIT, specifically designed to avoid microbial growth and damage caused by microorganisms in waterborne technical products. Preservative product is suitable for plastic paints, fillers, e...展开 BIOPOL XMO 210 is a broad range in-can preservative based on MIT and BIT, specifically designed to avoid microbial growth and damage caused by microorganisms in waterborne technical products. Preservative product is suitable for plastic paints, fillers, emulsions, glues, adhesives, sealants, and detergents. AOX & VOC & Formaldehyde free preservative. Cost-effective preservatives effective throughout a wide range of pH, from 2 to 10. BIOPOL XMO 210 balanced composition guarantees a long-term preservation action. BIOPOL XMO 210 is stable in a broad range of pH and temperatures. Specially appropriate for formaldehyde-sensible products. 收起 | Request Sample |
| CHEMICRYL 250 | Chemipol | CHEMICRYL 250 is a dispersing agent based on a polyelectrolyte from an acrylic polymer. CHEMICRYL 250 creates high stable dispersions and has great stability under extreme temperatures. Improves the color performance. CHEMICRYL 500C dispersing agent has b...展开 CHEMICRYL 250 is a dispersing agent based on a polyelectrolyte from an acrylic polymer. CHEMICRYL 250 creates high stable dispersions and has great stability under extreme temperatures. Improves the color performance. CHEMICRYL 500C dispersing agent has been specifically developed for improving charge and pigment dispersion in aqueous paints. 收起 | Request Sample |
| CHEMICRYL 500C | Chemipol | CHEMICRYL 500C is a dispersing agent based on a polyelectrolyte from an acrylic polymer. CHEMICRYL 500C creates high stable dispersions and has great stability under extreme temperatures. Improves the color performance. CHEMICRYL 500C dispersing agent has...展开 CHEMICRYL 500C is a dispersing agent based on a polyelectrolyte from an acrylic polymer. CHEMICRYL 500C creates high stable dispersions and has great stability under extreme temperatures. Improves the color performance. CHEMICRYL 500C dispersing agent has been specifically developed for improving charge and pigment dispersion in aqueous paints. 收起 | Request Sample |
| CHEMICRYL 600 BP | Chemipol | CHEMICRYL 600 BP is a polymeric dispersing agent with wetting properties suitable for high-quality aqueous coatings and pigment pastes. CHEMICRYL 600 BP dispersing agent is recommended for highly charged pigment pastes. Suitable for all kinds of pigments....展开 CHEMICRYL 600 BP is a polymeric dispersing agent with wetting properties suitable for high-quality aqueous coatings and pigment pastes. CHEMICRYL 600 BP dispersing agent is recommended for highly charged pigment pastes. Suitable for all kinds of pigments. Low propensity to foam generation, does not alter the shelf life of the product nor the anticorrosion effect. 收起 | Request Sample |
| CHEMICRYL 900 BP | Chemipol | CHEMICRYL 900 BP is a polymeric dispersing agent with wetting properties suitable for high-quality aqueous coatings and pigment pastes. CHEMICRYL 900 BP has been specifically designed to stabilize organic and inorganic aqueous-based pigments. Excellent de...展开 CHEMICRYL 900 BP is a polymeric dispersing agent with wetting properties suitable for high-quality aqueous coatings and pigment pastes. CHEMICRYL 900 BP has been specifically designed to stabilize organic and inorganic aqueous-based pigments. Excellent development of color intensity. Increases the stability of the pigments. 收起 | Request Sample |
| CHEMICRYL 950 BP | Chemipol | CHEMICRYL 950 BP is a high molecular dispersing agent with wetting properties, suitable for high-quality aqueous coatings and pigment pastes. CHEMICRYL 950 BP dispersing agent has been specifically designed to stabilize organic and inorganic adueous-based...展开 CHEMICRYL 950 BP is a high molecular dispersing agent with wetting properties, suitable for high-quality aqueous coatings and pigment pastes. CHEMICRYL 950 BP dispersing agent has been specifically designed to stabilize organic and inorganic adueous-based pigments. Excellent development of color intensity. Increases the stability of the pigments. 收起 | Request Sample |
| CHEMIPHOS 100 | Chemipol | CHEMIPHOS 100 is a dispersing and sequestering agent based on polyphosphates. CHEMIPOS 100 has a great dispersing capacity of charges and pigments. Improve solids incorporation and boosts anti-flocculent and anti-settling properties. Reduce the harmful ef...展开 CHEMIPHOS 100 is a dispersing and sequestering agent based on polyphosphates. CHEMIPOS 100 has a great dispersing capacity of charges and pigments. Improve solids incorporation and boosts anti-flocculent and anti-settling properties. Reduce the harmful effect of alkaline earth divalent metal cations. 收起 | Request Sample |
| CHEMIPOL BC LIQUIDO | Chemipol | CHEMIPOL BC LIQUIDO is a chelating agent based on a blend of anticaking agents that creates soluble and stable complexes with cations, preventing them from harmful action. CHEMIPOL BC LIQUIDO chelating agent avoids interference due to water hardness. Spec...展开 CHEMIPOL BC LIQUIDO is a chelating agent based on a blend of anticaking agents that creates soluble and stable complexes with cations, preventing them from harmful action. CHEMIPOL BC LIQUIDO chelating agent avoids interference due to water hardness. Specifically designed to improve the dry film generation process in high PVC paints. Highly compatible with habitual components of aqueous paints. 收起 | Request Sample |
| CHEMIPOL P 60 | Chemipol | CHEMIPOL P 60 is a water-based wax emulsion of anionic/nonionic refined waxes. Highly compatible with habitual components of coatings. Does not alter the wet rub film resistance. | Request Sample |
| CHEMIPOL P 80 | Chemipol | CHEMIPOL P 60 wax emulsion improves the hydrophobic properties of high PVC paints, extending the period before the film dries. Its qualities prevent the product from the typical issues due to too fast drying. | Request Sample |
| CHEMIPOL UV 01N | Chemipol | CHEMIPOL UV 01N is an optical brightener for white, interior, and aqueous paints. CHEMIPOL UV 01N enhances the perception of white color when it is exposed to natural light. CHEMIPOL UV 01N performance is better than traditional blue and violet pigments. ...展开 CHEMIPOL UV 01N is an optical brightener for white, interior, and aqueous paints. CHEMIPOL UV 01N enhances the perception of white color when it is exposed to natural light. CHEMIPOL UV 01N performance is better than traditional blue and violet pigments. Good compatibility with paints and coatings raw materials. CHEMIPOL UV 01N is an optical brightener specifically designed for paints containing low amount of Titanium Dioxide. CHEMIPOL UV 01N is a cumulative agent, increasing the whitening effect proportionally to the amount of product added until saturation point. 收起 | Request Sample |
| CHEMIPOL UV 05 N | Chemipol | CHEMIPOL UV 05 N is an optical brightener for white, interior, and aqueous paints. CHEMIPOL UV 05N enhances the perception of white color when it is exposed to natural light. CHEMIPOL UV 05N performance is better than traditional blue and violet pigments....展开 CHEMIPOL UV 05 N is an optical brightener for white, interior, and aqueous paints. CHEMIPOL UV 05N enhances the perception of white color when it is exposed to natural light. CHEMIPOL UV 05N performance is better than traditional blue and violet pigments. Good compatibility with paints and coatings raw materials. CHEMIPOL UV 05N is an optical brightener specifically designed for paints containing low amount of Titanium Dioxide. CHEMIPOL UV 05N is a non-cumulative agent, increasing the whitening effect proportionally to the amount of product added without a grayish effect due to overdosage. 收起 | Request Sample |
| CHEMIPOL UV 07 N | Chemipol | CHEMIPOL UV 07 N is an optical brightener for white, interior, and aqueous paints. CHEMIPOL UV 07N enhances the perception of white color when it is exposed to natural light. CHEMIPOL UV 07N performance is better than traditional blue and violet pigments....展开 CHEMIPOL UV 07 N is an optical brightener for white, interior, and aqueous paints. CHEMIPOL UV 07N enhances the perception of white color when it is exposed to natural light. CHEMIPOL UV 07N performance is better than traditional blue and violet pigments. Good compatibility with paints and coatings raw materials. CHEMIPOL UV 07N is an optical brightener specifically designed for paints containing low amount of Titanium Dioxide. CHEMIPOL UV 07N is a cumulative agent, increasing the whitening effect proportionally to the amount of product added until saturation point. 收起 | Request Sample |
| CHEMIPOL UV 150N | Chemipol | CHEMIPOL UV 150N is an optical brightener for white, interior, and aqueous paints. CHEMIPOL UV 0150N enhances the perception of white color when it is exposed to natural light. CHEMIPOL UV 0140N performance is better than traditional blue and violet pigme...展开 CHEMIPOL UV 150N is an optical brightener for white, interior, and aqueous paints. CHEMIPOL UV 0150N enhances the perception of white color when it is exposed to natural light. CHEMIPOL UV 0140N performance is better than traditional blue and violet pigments. Good compatibility with paints and coatings raw materials. CHEMIPOL UV 150N is an optical brightener specifically designed for paints containing low amounts of Titanium Dioxide. CHEMIPOL UV 150N is a non-cumulative agent, increasing the whitening effect proportionally to the amount of product added without a grayish effect due to overdosage. 收起 | Request Sample |
| DA-100 | DCC (Dairen Chemical Corp.) | DA-100 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-100 forms a flexible film with adhesive properties for broad applications. DA-100 is used as a base emu...展开 DA-100 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-100 forms a flexible film with adhesive properties for broad applications. DA-100 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-100 is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-100L | DCC (Dairen Chemical Corp.) | DA-100L is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-100L forms a flexible film with adhesive properties for broad applications. DA-100L is used as a base e...展开 DA-100L is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-100L forms a flexible film with adhesive properties for broad applications. DA-100L is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-100L is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-101 | DCC (Dairen Chemical Corp.) | DA-101 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-101 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C o...展开 DA-101 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-101 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 1500-2500 mPa.s. DA-101 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-101 is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-102 | DCC (Dairen Chemical Corp.) | DA-102 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-102 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C o...展开 DA-102 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-102 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 2500-3700 mPa.s. DA-102 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-102 is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-102H | DCC (Dairen Chemical Corp.) | DA-102H is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-102H forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C...展开 DA-102H is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-102H forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 3500-4500 mPa.s. DA-102H is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-102H is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-103 | DCC (Dairen Chemical Corp.) | DA-103 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-103 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C o...展开 DA-103 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-103 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 1500-2500 mPa.s. DA-103 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-103 is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-103H | DCC (Dairen Chemical Corp.) | DA-103H is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-103H forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C...展开 DA-103H is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-103H forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 3200-4200 mPa.s. DA-103H is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-103H is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-104 | DCC (Dairen Chemical Corp.) | DA-104 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-104 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C o...展开 DA-104 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-104 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 2000-3000 mPa.s. DA-104 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-104 is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-107 | DCC (Dairen Chemical Corp.) | DA-107 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-107 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C o...展开 DA-107 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-107 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 1000-2500 mPa.s. DA-107 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-107 is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-1100 | DCC (Dairen Chemical Corp.) | DA-1100 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and it forms a stable emulsion. DA-1100 improves adhesion, flex strength, abrasion resistance, and workability of modified compounds. DA-1100 ca...展开 DA-1100 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and it forms a stable emulsion. DA-1100 improves adhesion, flex strength, abrasion resistance, and workability of modified compounds. DA-1100 can be used in tile adhesives. 收起 | |
| DA-111 | DCC (Dairen Chemical Corp.) | DA-111 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-111 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C o...展开 DA-111 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-111 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 1500-2500 mPa.s. It is designed as a medium Tg product at around approximately 14 °C. DA-111 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-111 is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-1120 | DCC (Dairen Chemical Corp.) | DA-1120 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and it forms a stable emulsion. DA-1120 improves adhesion, flex strength, abrasion resistance, and workability of modified compounds. DA-1120 ca...展开 DA-1120 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and it forms a stable emulsion. DA-1120 improves adhesion, flex strength, abrasion resistance, and workability of modified compounds. DA-1120 can be used in tile adhesives. 收起 | |
| DA-1122 | DCC (Dairen Chemical Corp.) | DA-1122 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and it forms a stable emulsion. DA-1122 improves adhesion, flex strength, abrasion resistance, and workability of modified compounds. DA-1122 ca...展开 DA-1122 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and it forms a stable emulsion. DA-1122 improves adhesion, flex strength, abrasion resistance, and workability of modified compounds. DA-1122 can be used in tile adhesives. 收起 | |
| DA-1126 | DCC (Dairen Chemical Corp.) | DA-1126 is a water re-dispersible powder based on a vinyl acetate/ethylene copolymer based containing polyvinyl alcohol as a protective colloid. DA-1126 improves adhesion, flexibility, plasticity, abrasion resistance and workability of modified compounds....展开 DA-1126 is a water re-dispersible powder based on a vinyl acetate/ethylene copolymer based containing polyvinyl alcohol as a protective colloid. DA-1126 improves adhesion, flexibility, plasticity, abrasion resistance and workability of modified compounds. It is used in ceramic tile adhesives, and EIFS. 收起 | |
| DA-1130 | DCC (Dairen Chemical Corp.) | DA-1130 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1130 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds....展开 DA-1130 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1130 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds. It can be used in tile adhesives. 收起 | |
| DA-1133 | DCC (Dairen Chemical Corp.) | DA-1133 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1133 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds....展开 DA-1133 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1133 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds. DA-1133 is used in construction adhesives. 收起 | |
| DA-117 | DCC (Dairen Chemical Corp.) | DA-117 is a non-plasticized, aqueous, milky, white dispersion of a vinyl acetate-ethylene copolymer with high solid contents developed to provide a versatile base for construction applications. After evaporation of its water content, DA-117 forms a flexib...展开 DA-117 is a non-plasticized, aqueous, milky, white dispersion of a vinyl acetate-ethylene copolymer with high solid contents developed to provide a versatile base for construction applications. After evaporation of its water content, DA-117 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 500-1500 mPa.s. DA-117 is used in joint compounds and decorative coatings, and carpet back coatings. 收起 | |
| DA-1200 | DCC (Dairen Chemical Corp.) | DA-1200 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1200 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds....展开 DA-1200 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1200 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds. DA-1200 is used in tile adhesives. 收起 | |
| DA-1210 | DCC (Dairen Chemical Corp.) | DA-1210 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1210 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds....展开 DA-1210 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1210 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds. DA-1210 is used in construction adhesives, sealing slurries, and repair mortars. 收起 | |
| DA-125 | DCC (Dairen Chemical Corp.) | DA-125 is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. Due to its low Tg at around -8 °C, the dry film remains flexible even at temperatures below 0 °C. In general, DA-125 is used as general adhesive f...展开 DA-125 is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. Due to its low Tg at around -8 °C, the dry film remains flexible even at temperatures below 0 °C. In general, DA-125 is used as general adhesive for packaging, bookbinding, and bonding for plastic films, coated papers. DA-125 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-125 is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-128 | DCC (Dairen Chemical Corp.) | DA-128 is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. Due to its low Tg at around -13°C, the dry film remains flexible even at temperatures below 0 °C. In general, DA-128 is used as general adhesive f...展开 DA-128 is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. Due to its low Tg at around -13°C, the dry film remains flexible even at temperatures below 0 °C. In general, DA-128 is used as general adhesive for packaging, bookbinding, and bonding for plastic films, coated papers. DA-128 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-128 is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-128H | DCC (Dairen Chemical Corp.) | DA-128H is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. Due to its low Tg at around -13 °C, the dry film remains flexible even at temperatures below 0 °C. In general, DA-128H is used as general adhesiv...展开 DA-128H is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. Due to its low Tg at around -13 °C, the dry film remains flexible even at temperatures below 0 °C. In general, DA-128H is used as general adhesive for packaging, bookbinding, and bonding for plastic films, coated papers. DA-128H is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-128H is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-1400 | DCC (Dairen Chemical Corp.) | DA-1400 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1400 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds....展开 DA-1400 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1400 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds. DA-1400 is used in tile adhesives, and sealing slurries. 收起 | |
| DA-1410 | DCC (Dairen Chemical Corp.) | DA-1410 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1410 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds....展开 DA-1410 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1410 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds. DA-1410 is used in construction adhesives. 收起 | |
| DA-1420 | DCC (Dairen Chemical Corp.) | DA-1420 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1420 improves adhesion, flexural strength, plasticity, abrasion resistance, and workability of modified compound...展开 DA-1420 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1420 improves adhesion, flexural strength, plasticity, abrasion resistance, and workability of modified compounds. DA-1420 is used in tile adhesives. 收起 | |
| DA-1430 | DCC (Dairen Chemical Corp.) | DA-1430 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1430 improves adhesion, flex strength, plasticity, abrasion resistance, and workability of modified compounds. D...展开 DA-1430 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1430 improves adhesion, flex strength, plasticity, abrasion resistance, and workability of modified compounds. DA-1430 is used in tile adhesives, and trowelling compounds. 收起 | |
| DA-1450 | DCC (Dairen Chemical Corp.) | DA-1450 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1450 improves adhesion, flex strength, plasticity, abrasion resistance, and workability of modified compounds. D...展开 DA-1450 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1450 improves adhesion, flex strength, plasticity, abrasion resistance, and workability of modified compounds. DA-1450 is used in tile adhesives, and construction adhesives. 收起 | |
| DA-179 | DCC (Dairen Chemical Corp.) | DA-179 is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. The soft, flexible polymer makes use of a surfactant protection system to provide excellent water resistance and soft, flexible films. DA-179 is u...展开 DA-179 is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. The soft, flexible polymer makes use of a surfactant protection system to provide excellent water resistance and soft, flexible films. DA-179 is used in high performance waterproof coatings. 收起 | |
| DA-180L | DCC (Dairen Chemical Corp.) | DA-180L is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. After the evaporation of its water content, DA-180L dries to a clear, soft and flexible film to provide a better waterproofing property. DA-180L ...展开 DA-180L is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. After the evaporation of its water content, DA-180L dries to a clear, soft and flexible film to provide a better waterproofing property. DA-180L is used in general adhesives. 收起 | |
| DA-183 | DCC (Dairen Chemical Corp.) | DA-183 is a vinyl acetate-ethylene copolymer emulsion for cement or plaster based mortars. The addition causes of DA-183 increases the adhesion of mortars to other mineral surfaces. These modified coatings show much better elasticity. DA-183 is used in mo...展开 DA-183 is a vinyl acetate-ethylene copolymer emulsion for cement or plaster based mortars. The addition causes of DA-183 increases the adhesion of mortars to other mineral surfaces. These modified coatings show much better elasticity. DA-183 is used in mortars or grouts. 收起 | |
| DA-265 | DCC (Dairen Chemical Corp.) | DA-265 is a non-plasticized, aqueous, milky, white vinyl acetate-ethylene-acrylate terpolymer emulsion with a solid content of 65%. After drying, a water-resistant, clear and flexible film is formed, exhibiting stability against degradation, discoloration...展开 DA-265 is a non-plasticized, aqueous, milky, white vinyl acetate-ethylene-acrylate terpolymer emulsion with a solid content of 65%. After drying, a water-resistant, clear and flexible film is formed, exhibiting stability against degradation, discoloration by UV-light, oxygen and the ozone. DA-265 is used in mineral coatings, and floor, wall, or ceiling adhesives. . 收起 | |
| DA-265H | DCC (Dairen Chemical Corp.) | DA-265H is a non-plasticized, aqueous, milky, white vinyl acetate-ethylene-acrylate terpolymer emulsion with a solid content of 65%. A water-resistant, clear and flexible film is formed after drying. This film exhibits stability against degradation, disco...展开 DA-265H is a non-plasticized, aqueous, milky, white vinyl acetate-ethylene-acrylate terpolymer emulsion with a solid content of 65%. A water-resistant, clear and flexible film is formed after drying. This film exhibits stability against degradation, discoloration, oxygen, and the ozone. Because of DA-265H's adjusted ethylene content, this film is extremely tacky and uses no plasticizers to get softness or flexibility. DA-265H is used in mineral coatings, and floor, wall, or ceiling adhesives. 收起 | |
| DA-310 | DCC (Dairen Chemical Corp.) | DA-310 is a non-plasticized, aqueous, milky, white vinyl acetate-ethylene copolymer emulsion containing incorporated carboxylic groups. It exhibits VAE emulsion properties together with increased adhesion to metals, like aluminum. DA-310 is used for seali...展开 DA-310 is a non-plasticized, aqueous, milky, white vinyl acetate-ethylene copolymer emulsion containing incorporated carboxylic groups. It exhibits VAE emulsion properties together with increased adhesion to metals, like aluminum. DA-310 is used for sealing plastics or metals to other substrates, and as a raw material for adhesives. 收起 | |
| DA-3510 | DCC (Dairen Chemical Corp.) | DA-3510 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. This resin is soft and flexible, because of its relatively high ethylene content. DA-3510 enhances the adhesion, fle...展开 DA-3510 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. This resin is soft and flexible, because of its relatively high ethylene content. DA-3510 enhances the adhesion, flexural strength, plasticity, and workability of modified compounds. DA-3510 is recommended for use as a sole binder for making construction adhesives and seals. 收起 | |
| DA-371 | DCC (Dairen Chemical Corp.) | DA-371 is an aqueous, non-plasticized, milky white emulsion synthesized from vinyl acetate and ethylene. DA-371 with different paint formulations can bring about many changes of the gloss of indoor-paints in accordance with the customers’ demand. DA-371 i...展开 DA-371 is an aqueous, non-plasticized, milky white emulsion synthesized from vinyl acetate and ethylene. DA-371 with different paint formulations can bring about many changes of the gloss of indoor-paints in accordance with the customers’ demand. DA-371 is used in low VOC interior paints, semi flat and semi gloss paints, deep shade paints, exterior paints, and plaster and textured coatings. 收起 | |
| DA-500 | DCC (Dairen Chemical Corp.) | DA-500 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-500 forms a flexible film with adhesive properties for a broad range of applications. DA-500 is used in...展开 DA-500 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-500 forms a flexible film with adhesive properties for a broad range of applications. DA-500 is used in base for EPI wood glue systems, as a base emulsion for floor, wall or ceiling adhesives, and plastic (PVC) or metal foil bonding. 收起 | |
| DA-502 | DCC (Dairen Chemical Corp.) | DA-502 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-502 forms a flexible film with adhesive properties for a broad range of applications. It has a viscosit...展开 DA-502 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-502 forms a flexible film with adhesive properties for a broad range of applications. It has a viscosity at 25 °C of 3000-4000 mPa.s. DA-502 is used in base for EPI wood glue systems, as a base emulsion for floor, wall or ceiling adhesives, and plastic (PVC) or metal foil bonding. 收起 | |
| DA-511 | DCC (Dairen Chemical Corp.) | DA-511 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-511 forms a flexible film with adhesive properties for a broad range of applications. It has a viscosit...展开 DA-511 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-511 forms a flexible film with adhesive properties for a broad range of applications. It has a viscosity at 25 °C of 1500-2500 mPa.s. DA-511 is used in base for EPI wood glue systems, as a base emulsion for floor, wall or ceiling adhesives, and plastic (PVC) or metal foil bonding. 收起 | |
| DA-523 | DCC (Dairen Chemical Corp.) | DA-523 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-523 forms a flexible film with adhesive properties for a broad range of applications. It has a viscosit...展开 DA-523 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-523 forms a flexible film with adhesive properties for a broad range of applications. It has a viscosity at 25 °C of 700-1000 mPa.s. DA-523 is used in base for EPI wood glue systems, as a base emulsion for floor, wall or ceiling adhesives, and plastic (PVC) or metal foil bonding. 收起 | |
| DA-524 | DCC (Dairen Chemical Corp.) | DA-524 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-524 forms a tough but still flexible film with adhesive properties for a broad range of applications. I...展开 DA-524 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-524 forms a tough but still flexible film with adhesive properties for a broad range of applications. It has a viscosity at 25 °C of 1500-2500 mPa.s. DA-524 is used in base for EPI wood glue systems, as a base emulsion for floor, wall or ceiling adhesives, and plastic (PVC) or metal foil bonding. 收起 | |
| DA-6200 | DCC (Dairen Chemical Corp.) | DA-6200 is a water re-dispersible powder based on vinyl acetate/ethylene copolymer containing polyvinyl alcohol as a protective colloid. DA-6200 contains a fine mineral filler as an anti-blocking agent. It is free of solvents, plasticizers and film-formin...展开 DA-6200 is a water re-dispersible powder based on vinyl acetate/ethylene copolymer containing polyvinyl alcohol as a protective colloid. DA-6200 contains a fine mineral filler as an anti-blocking agent. It is free of solvents, plasticizers and film-forming agents. DA-6200 is recommended for blending with inorganic binders such as cement, hydrated lime to modify mortar hydration systems, tile adhesives, EIFS, and finishing plasters. 收起 | |
| DA-652 | DCC (Dairen Chemical Corp.) | DA-652 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, the extra viscous DA-652 forms a flexible film with adhesive properties for a broad range of applications....展开 DA-652 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, the extra viscous DA-652 forms a flexible film with adhesive properties for a broad range of applications. It has a viscosity at 25 °C of 15000-25000 mPa.s. DA-652 is used as base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-691 | DCC (Dairen Chemical Corp.) | DA-691 is a non-plasticized, aqueous, milky white, cross-linkable copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-691 forms a flexible and soft film. It has a viscosity at 25 °C of 100-500 mPa.s. DA-691...展开 DA-691 is a non-plasticized, aqueous, milky white, cross-linkable copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-691 forms a flexible and soft film. It has a viscosity at 25 °C of 100-500 mPa.s. DA-691's main use is in EPI wood glue. 收起 | |
| DA-901 | DCC (Dairen Chemical Corp.) | DA-901 is a non-plasticized, aqueous, milky white terpolymer dispersion based on vinyl chloride, vinyl acetate and ethylene. Due to it's low Tg levels it provides a soft transparent film. It is generally used as an adhesive and provides a fire retardant p...展开 DA-901 is a non-plasticized, aqueous, milky white terpolymer dispersion based on vinyl chloride, vinyl acetate and ethylene. Due to it's low Tg levels it provides a soft transparent film. It is generally used as an adhesive and provides a fire retardant property. DA-901 is used as a general adhesive and is specially suitable for wood applications. 收起 | |
| DA-908 | DCC (Dairen Chemical Corp.) | DA-908 is an aqueous, milky white terpolymer dispersion based on vinyl chloride, vinyl acetate and ethylene. DA-908 leads to a clear film with low surface tack, and resistance to water, alkali, solvents, light, and aging. It has a Tg value of 20-30 °C and...展开 DA-908 is an aqueous, milky white terpolymer dispersion based on vinyl chloride, vinyl acetate and ethylene. DA-908 leads to a clear film with low surface tack, and resistance to water, alkali, solvents, light, and aging. It has a Tg value of 20-30 °C and is a cloudy substance initially. DA-908 is used as a base emulsion for general adhesives and EPI wood adhesives. 收起 | |
| DA-910 | DCC (Dairen Chemical Corp.) | DA-910 is a copolymer of Ethylene and Vinyl Chloride with amide functionality. It has fire retardant, water, and alkali resistance properties. It has a Tg rating of between -2 and 2 °C. DA-910 can be used as a base sealant emulsion in non-woven fabrics an...展开 DA-910 is a copolymer of Ethylene and Vinyl Chloride with amide functionality. It has fire retardant, water, and alkali resistance properties. It has a Tg rating of between -2 and 2 °C. DA-910 can be used as a base sealant emulsion in non-woven fabrics and paper binder, paper and fabric impregnation binder, flocking binder, car sheet and carpet back coating, and adhesive for high frequency curing. 收起 | |
| DA-920 | DCC (Dairen Chemical Corp.) | DA-920 is a copolymer of Ethylene and Vinyl Chloride with amide functionality. It has fire retardant, water, and alkali resistance properties. It has a Tg rating of between 18 and 22 °C. DA-920 can be used as a base sealant emulsion in non-woven fabrics a...展开 DA-920 is a copolymer of Ethylene and Vinyl Chloride with amide functionality. It has fire retardant, water, and alkali resistance properties. It has a Tg rating of between 18 and 22 °C. DA-920 can be used as a base sealant emulsion in non-woven fabrics and paper binder, paper and fabric impregnation binder, flocking binder, car sheet and carpet back coating, and adhesive for high frequency curing. 收起 | |
| DA-930 | DCC (Dairen Chemical Corp.) | DA-930 is a copolymer of Ethylene and Vinyl Chloride with amide functionality. It has fire retardant, water, and alkali resistance properties. It has a Tg rating of between 28 and 32 °C. DA-930 can be used as a base sealant emulsion in non-woven fabrics a...展开 DA-930 is a copolymer of Ethylene and Vinyl Chloride with amide functionality. It has fire retardant, water, and alkali resistance properties. It has a Tg rating of between 28 and 32 °C. DA-930 can be used as a base sealant emulsion in non-woven fabrics and paper binder, paper and fabric impregnation binder, flocking binder, car sheet and carpet back coating, and adhesive for high frequency curing. 收起 | |
| DENSIPOL DF 152 | Chemipol | DENSIPOL DF 152 is an antifoaming agent based on an alkylene oxide copolymer on fatty alcohol. Effective throughout a wide range of pH, salinity, and temperature. Highly effective controlling the foaming generation process in urban and industrial wastewat...展开 DENSIPOL DF 152 is an antifoaming agent based on an alkylene oxide copolymer on fatty alcohol. Effective throughout a wide range of pH, salinity, and temperature. Highly effective controlling the foaming generation process in urban and industrial wastewater plants and other water-based systems. 收起 | Request Sample |
| DENSIPOL DF 155 | Chemipol | DENSIPOL DF 155 is an antifoaming agent based on ethylene oxide copolymers on lineal alcohol. Cost-effective, free of silicone antifoaming agent. Effective throughout a wide range of pH and temperatures. Highly effective in controlling the foaming generat...展开 DENSIPOL DF 155 is an antifoaming agent based on ethylene oxide copolymers on lineal alcohol. Cost-effective, free of silicone antifoaming agent. Effective throughout a wide range of pH and temperatures. Highly effective in controlling the foaming generation process during the manufacturing, handling, and storage processes of paints and aqueous glues. To obtain full antifoaming protection, it is recommended to combine the product with a defoamer such as DENSIPOL DF 800. 收起 | Request Sample |
| DENSIPOL DF 800 | Chemipol | DENSIPOL DF 800 is an antifoaming agent based on oxide copolymers on fatty acids. Cost-effective, free of silicone antifoaming agent. Effective throughout a wide range of pH and temperatures. Highly effective in controlling the foaming generation process ...展开 DENSIPOL DF 800 is an antifoaming agent based on oxide copolymers on fatty acids. Cost-effective, free of silicone antifoaming agent. Effective throughout a wide range of pH and temperatures. Highly effective in controlling the foaming generation process during manufacturing, handling, and storage processes of paints, aqueous glues, and cooling circuits. 收起 | Request Sample |
| DENSIPOL DF 820 | Chemipol | DENSIPOL DF 820 is an emulsion antifoaming agent based on alkoxylated compounds and fatty acids derivates. Cost-effective, free of silicone antifoaming agent. Effective throughout a wide range of pH and temperatures. Highly effective in controlling the f...展开 DENSIPOL DF 820 is an emulsion antifoaming agent based on alkoxylated compounds and fatty acids derivates. Cost-effective, free of silicone antifoaming agent. Effective throughout a wide range of pH and temperatures. Highly effective in controlling the foaming generation process during manufacturing, handling, and storage processes of paints, aqueous glues, and cooling circuits. Complies with Food-Contact Regulations: BfR XXXVI & FDA 21.176.210. 收起 | Request Sample |
| DENSIPOL PA 2497 | Chemipol | DENSIPOL PA 2497 is an antifoaming agent based on mineral compounds and nonionic surfactant specifically designed for controlling the foaming generation process during manufacturing, handling and storage processes of paints, printing inks, adhesives and a...展开 DENSIPOL PA 2497 is an antifoaming agent based on mineral compounds and nonionic surfactant specifically designed for controlling the foaming generation process during manufacturing, handling and storage processes of paints, printing inks, adhesives and aqueous glues. Cost-effective, silicone-free antifoaming agent. Excellent emulsifiability. Excellent antifoaming effect in paints with a PVC range between 50 and 85. 收起 | Request Sample |
| DENSIPOL PA 318 | Chemipol | DENSIPOL PA 318 is an antifoaming and defoamer agent based on mineral compounds and nonionic surfactants, specifically designed for avoiding foam generation during manufacturing and application of waterborne technical products and sewages. Excellent antif...展开 DENSIPOL PA 318 is an antifoaming and defoamer agent based on mineral compounds and nonionic surfactants, specifically designed for avoiding foam generation during manufacturing and application of waterborne technical products and sewages. Excellent antifoaming effect in paints with a PVC range between 30 and 70. 收起 | Request Sample |
