| 1257 Superfast Yellow 10G | Shanghai Honor Industrial Co., LTD | 1257 Superfast Yellow 10G is Pigment Yellow 3, C.I.No. PY3, also known as Hansa Yellow 10G and Arylide Yellow 10G. It has a strong greenish shade, has lower surface area, good opacity, and excellent lightfastness. This product can be used for air-drying p...展开 1257 Superfast Yellow 10G is Pigment Yellow 3, C.I.No. PY3, also known as Hansa Yellow 10G and Arylide Yellow 10G. It has a strong greenish shade, has lower surface area, good opacity, and excellent lightfastness. This product can be used for air-drying paints, latex paints, textile paste and printing inks. 收起 | |
| 1260 SuperFast Yellow RNG | Shanghai Honor Industrial Co., LTD | 1260 SuperFast Yellow RNG是一种有出色分散性的黄绿色粉末。它推荐用于道路标线涂料和工业涂料。 | |
| 1,4-Butanediol (1,4-BDO) | DCC (Dairen Chemical Corp.) | 1,4-Butanediol (1,4-BDO) is produced by hydro-formulation and hydrogenation of Allyl Alcohol, carbon monoxide and hydrogen. 1,4-Butanediol is a colorless, high-boiling liquid with a low order of toxicity. 1,4-Butanediol is used as a raw material for manuf...展开 1,4-Butanediol (1,4-BDO) is produced by hydro-formulation and hydrogenation of Allyl Alcohol, carbon monoxide and hydrogen. 1,4-Butanediol is a colorless, high-boiling liquid with a low order of toxicity. 1,4-Butanediol is used as a raw material for manufacturing carrier solvent in printing ink, and is a key component of hot melt adhesive. 收起 | |
| 2-Methyl-1,3-Propanediol | DCC (Dairen Chemical Corp.) | 2-Methyl-1,3-Propanediol is a by-product, which is produced by hydro-formulation and hydro-generation of Allyl Alcohol, carbon monoxide, and hydrogen. It is a colorless, low viscosity and toxic liquid with a unique molecular structure. 2-Methyl-1,3-Propan...展开 2-Methyl-1,3-Propanediol is a by-product, which is produced by hydro-formulation and hydro-generation of Allyl Alcohol, carbon monoxide, and hydrogen. It is a colorless, low viscosity and toxic liquid with a unique molecular structure. 2-Methyl-1,3-Propanediol is used as a raw material in monomers for the preparation of coatings and binders. 收起 | |
| Alkoxylated 2-Methyl-1,3-Propanediol | DCC (Dairen Chemical Corp.) | Alkoxylated 2-Methyl-1,3-Propanediol is produced by Alkoxylation of 2-Methyl-1,3-Propanediol and Alkoxide. It is a colorless liquid with two primary hydroxyls. Alkoxylated 2-Methyl-1,3-Propanediol is used as a raw material in printing inks, adhesives, and...展开 Alkoxylated 2-Methyl-1,3-Propanediol is produced by Alkoxylation of 2-Methyl-1,3-Propanediol and Alkoxide. It is a colorless liquid with two primary hydroxyls. Alkoxylated 2-Methyl-1,3-Propanediol is used as a raw material in printing inks, adhesives, and paints. 收起 | |
| DA-100 | DCC (Dairen Chemical Corp.) | DA-100 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-100 forms a flexible film with adhesive properties for broad applications. DA-100 is used as a base emu...展开 DA-100 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-100 forms a flexible film with adhesive properties for broad applications. DA-100 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-100 is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-100L | DCC (Dairen Chemical Corp.) | DA-100L is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-100L forms a flexible film with adhesive properties for broad applications. DA-100L is used as a base e...展开 DA-100L is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-100L forms a flexible film with adhesive properties for broad applications. DA-100L is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-100L is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-101 | DCC (Dairen Chemical Corp.) | DA-101 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-101 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C o...展开 DA-101 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-101 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 1500-2500 mPa.s. DA-101 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-101 is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-102 | DCC (Dairen Chemical Corp.) | DA-102 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-102 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C o...展开 DA-102 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-102 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 2500-3700 mPa.s. DA-102 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-102 is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-102H | DCC (Dairen Chemical Corp.) | DA-102H is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-102H forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C...展开 DA-102H is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-102H forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 3500-4500 mPa.s. DA-102H is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-102H is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-103 | DCC (Dairen Chemical Corp.) | DA-103 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-103 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C o...展开 DA-103 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-103 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 1500-2500 mPa.s. DA-103 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-103 is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-103H | DCC (Dairen Chemical Corp.) | DA-103H is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-103H forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C...展开 DA-103H is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-103H forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 3200-4200 mPa.s. DA-103H is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-103H is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-104 | DCC (Dairen Chemical Corp.) | DA-104 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-104 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C o...展开 DA-104 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-104 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 2000-3000 mPa.s. DA-104 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-104 is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-107 | DCC (Dairen Chemical Corp.) | DA-107 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-107 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C o...展开 DA-107 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-107 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 1000-2500 mPa.s. DA-107 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-107 is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-1100 | DCC (Dairen Chemical Corp.) | DA-1100 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and it forms a stable emulsion. DA-1100 improves adhesion, flex strength, abrasion resistance, and workability of modified compounds. DA-1100 ca...展开 DA-1100 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and it forms a stable emulsion. DA-1100 improves adhesion, flex strength, abrasion resistance, and workability of modified compounds. DA-1100 can be used in tile adhesives. 收起 | |
| DA-111 | DCC (Dairen Chemical Corp.) | DA-111 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-111 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C o...展开 DA-111 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-111 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 1500-2500 mPa.s. It is designed as a medium Tg product at around approximately 14 °C. DA-111 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-111 is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-1120 | DCC (Dairen Chemical Corp.) | DA-1120 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and it forms a stable emulsion. DA-1120 improves adhesion, flex strength, abrasion resistance, and workability of modified compounds. DA-1120 ca...展开 DA-1120 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and it forms a stable emulsion. DA-1120 improves adhesion, flex strength, abrasion resistance, and workability of modified compounds. DA-1120 can be used in tile adhesives. 收起 | |
| DA-1122 | DCC (Dairen Chemical Corp.) | DA-1122 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and it forms a stable emulsion. DA-1122 improves adhesion, flex strength, abrasion resistance, and workability of modified compounds. DA-1122 ca...展开 DA-1122 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and it forms a stable emulsion. DA-1122 improves adhesion, flex strength, abrasion resistance, and workability of modified compounds. DA-1122 can be used in tile adhesives. 收起 | |
| DA-1126 | DCC (Dairen Chemical Corp.) | DA-1126 is a water re-dispersible powder based on a vinyl acetate/ethylene copolymer based containing polyvinyl alcohol as a protective colloid. DA-1126 improves adhesion, flexibility, plasticity, abrasion resistance and workability of modified compounds....展开 DA-1126 is a water re-dispersible powder based on a vinyl acetate/ethylene copolymer based containing polyvinyl alcohol as a protective colloid. DA-1126 improves adhesion, flexibility, plasticity, abrasion resistance and workability of modified compounds. It is used in ceramic tile adhesives, and EIFS. 收起 | |
| DA-1130 | DCC (Dairen Chemical Corp.) | DA-1130 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1130 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds....展开 DA-1130 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1130 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds. It can be used in tile adhesives. 收起 | |
| DA-1133 | DCC (Dairen Chemical Corp.) | DA-1133 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1133 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds....展开 DA-1133 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1133 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds. DA-1133 is used in construction adhesives. 收起 | |
| DA-117 | DCC (Dairen Chemical Corp.) | DA-117 is a non-plasticized, aqueous, milky, white dispersion of a vinyl acetate-ethylene copolymer with high solid contents developed to provide a versatile base for construction applications. After evaporation of its water content, DA-117 forms a flexib...展开 DA-117 is a non-plasticized, aqueous, milky, white dispersion of a vinyl acetate-ethylene copolymer with high solid contents developed to provide a versatile base for construction applications. After evaporation of its water content, DA-117 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 500-1500 mPa.s. DA-117 is used in joint compounds and decorative coatings, and carpet back coatings. 收起 | |
| DA-1200 | DCC (Dairen Chemical Corp.) | DA-1200 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1200 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds....展开 DA-1200 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1200 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds. DA-1200 is used in tile adhesives. 收起 | |
| DA-1210 | DCC (Dairen Chemical Corp.) | DA-1210 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1210 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds....展开 DA-1210 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1210 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds. DA-1210 is used in construction adhesives, sealing slurries, and repair mortars. 收起 | |
| DA-125 | DCC (Dairen Chemical Corp.) | DA-125 is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. Due to its low Tg at around -8 °C, the dry film remains flexible even at temperatures below 0 °C. In general, DA-125 is used as general adhesive f...展开 DA-125 is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. Due to its low Tg at around -8 °C, the dry film remains flexible even at temperatures below 0 °C. In general, DA-125 is used as general adhesive for packaging, bookbinding, and bonding for plastic films, coated papers. DA-125 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-125 is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-128 | DCC (Dairen Chemical Corp.) | DA-128 is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. Due to its low Tg at around -13°C, the dry film remains flexible even at temperatures below 0 °C. In general, DA-128 is used as general adhesive f...展开 DA-128 is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. Due to its low Tg at around -13°C, the dry film remains flexible even at temperatures below 0 °C. In general, DA-128 is used as general adhesive for packaging, bookbinding, and bonding for plastic films, coated papers. DA-128 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-128 is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-128H | DCC (Dairen Chemical Corp.) | DA-128H is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. Due to its low Tg at around -13 °C, the dry film remains flexible even at temperatures below 0 °C. In general, DA-128H is used as general adhesiv...展开 DA-128H is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. Due to its low Tg at around -13 °C, the dry film remains flexible even at temperatures below 0 °C. In general, DA-128H is used as general adhesive for packaging, bookbinding, and bonding for plastic films, coated papers. DA-128H is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-128H is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-1400 | DCC (Dairen Chemical Corp.) | DA-1400 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1400 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds....展开 DA-1400 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1400 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds. DA-1400 is used in tile adhesives, and sealing slurries. 收起 | |
| DA-1410 | DCC (Dairen Chemical Corp.) | DA-1410 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1410 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds....展开 DA-1410 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1410 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds. DA-1410 is used in construction adhesives. 收起 | |
| DA-1420 | DCC (Dairen Chemical Corp.) | DA-1420 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1420 improves adhesion, flexural strength, plasticity, abrasion resistance, and workability of modified compound...展开 DA-1420 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1420 improves adhesion, flexural strength, plasticity, abrasion resistance, and workability of modified compounds. DA-1420 is used in tile adhesives. 收起 | |
| DA-1430 | DCC (Dairen Chemical Corp.) | DA-1430 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1430 improves adhesion, flex strength, plasticity, abrasion resistance, and workability of modified compounds. D...展开 DA-1430 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1430 improves adhesion, flex strength, plasticity, abrasion resistance, and workability of modified compounds. DA-1430 is used in tile adhesives, and trowelling compounds. 收起 | |
| DA-1450 | DCC (Dairen Chemical Corp.) | DA-1450 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1450 improves adhesion, flex strength, plasticity, abrasion resistance, and workability of modified compounds. D...展开 DA-1450 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1450 improves adhesion, flex strength, plasticity, abrasion resistance, and workability of modified compounds. DA-1450 is used in tile adhesives, and construction adhesives. 收起 | |
| DA-179 | DCC (Dairen Chemical Corp.) | DA-179 is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. The soft, flexible polymer makes use of a surfactant protection system to provide excellent water resistance and soft, flexible films. DA-179 is u...展开 DA-179 is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. The soft, flexible polymer makes use of a surfactant protection system to provide excellent water resistance and soft, flexible films. DA-179 is used in high performance waterproof coatings. 收起 | |
| DA-180L | DCC (Dairen Chemical Corp.) | DA-180L is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. After the evaporation of its water content, DA-180L dries to a clear, soft and flexible film to provide a better waterproofing property. DA-180L ...展开 DA-180L is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. After the evaporation of its water content, DA-180L dries to a clear, soft and flexible film to provide a better waterproofing property. DA-180L is used in general adhesives. 收起 | |
| DA-183 | DCC (Dairen Chemical Corp.) | DA-183 is a vinyl acetate-ethylene copolymer emulsion for cement or plaster based mortars. The addition causes of DA-183 increases the adhesion of mortars to other mineral surfaces. These modified coatings show much better elasticity. DA-183 is used in mo...展开 DA-183 is a vinyl acetate-ethylene copolymer emulsion for cement or plaster based mortars. The addition causes of DA-183 increases the adhesion of mortars to other mineral surfaces. These modified coatings show much better elasticity. DA-183 is used in mortars or grouts. 收起 | |
| DA-265 | DCC (Dairen Chemical Corp.) | DA-265 is a non-plasticized, aqueous, milky, white vinyl acetate-ethylene-acrylate terpolymer emulsion with a solid content of 65%. After drying, a water-resistant, clear and flexible film is formed, exhibiting stability against degradation, discoloration...展开 DA-265 is a non-plasticized, aqueous, milky, white vinyl acetate-ethylene-acrylate terpolymer emulsion with a solid content of 65%. After drying, a water-resistant, clear and flexible film is formed, exhibiting stability against degradation, discoloration by UV-light, oxygen and the ozone. DA-265 is used in mineral coatings, and floor, wall, or ceiling adhesives. . 收起 | |
| DA-265H | DCC (Dairen Chemical Corp.) | DA-265H is a non-plasticized, aqueous, milky, white vinyl acetate-ethylene-acrylate terpolymer emulsion with a solid content of 65%. A water-resistant, clear and flexible film is formed after drying. This film exhibits stability against degradation, disco...展开 DA-265H is a non-plasticized, aqueous, milky, white vinyl acetate-ethylene-acrylate terpolymer emulsion with a solid content of 65%. A water-resistant, clear and flexible film is formed after drying. This film exhibits stability against degradation, discoloration, oxygen, and the ozone. Because of DA-265H's adjusted ethylene content, this film is extremely tacky and uses no plasticizers to get softness or flexibility. DA-265H is used in mineral coatings, and floor, wall, or ceiling adhesives. 收起 | |
| DA-310 | DCC (Dairen Chemical Corp.) | DA-310 is a non-plasticized, aqueous, milky, white vinyl acetate-ethylene copolymer emulsion containing incorporated carboxylic groups. It exhibits VAE emulsion properties together with increased adhesion to metals, like aluminum. DA-310 is used for seali...展开 DA-310 is a non-plasticized, aqueous, milky, white vinyl acetate-ethylene copolymer emulsion containing incorporated carboxylic groups. It exhibits VAE emulsion properties together with increased adhesion to metals, like aluminum. DA-310 is used for sealing plastics or metals to other substrates, and as a raw material for adhesives. 收起 | |
| DA-3510 | DCC (Dairen Chemical Corp.) | DA-3510 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. This resin is soft and flexible, because of its relatively high ethylene content. DA-3510 enhances the adhesion, fle...展开 DA-3510 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. This resin is soft and flexible, because of its relatively high ethylene content. DA-3510 enhances the adhesion, flexural strength, plasticity, and workability of modified compounds. DA-3510 is recommended for use as a sole binder for making construction adhesives and seals. 收起 | |
| DA-371 | DCC (Dairen Chemical Corp.) | DA-371 is an aqueous, non-plasticized, milky white emulsion synthesized from vinyl acetate and ethylene. DA-371 with different paint formulations can bring about many changes of the gloss of indoor-paints in accordance with the customers’ demand. DA-371 i...展开 DA-371 is an aqueous, non-plasticized, milky white emulsion synthesized from vinyl acetate and ethylene. DA-371 with different paint formulations can bring about many changes of the gloss of indoor-paints in accordance with the customers’ demand. DA-371 is used in low VOC interior paints, semi flat and semi gloss paints, deep shade paints, exterior paints, and plaster and textured coatings. 收起 | |
| DA-500 | DCC (Dairen Chemical Corp.) | DA-500 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-500 forms a flexible film with adhesive properties for a broad range of applications. DA-500 is used in...展开 DA-500 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-500 forms a flexible film with adhesive properties for a broad range of applications. DA-500 is used in base for EPI wood glue systems, as a base emulsion for floor, wall or ceiling adhesives, and plastic (PVC) or metal foil bonding. 收起 | |
| DA-502 | DCC (Dairen Chemical Corp.) | DA-502 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-502 forms a flexible film with adhesive properties for a broad range of applications. It has a viscosit...展开 DA-502 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-502 forms a flexible film with adhesive properties for a broad range of applications. It has a viscosity at 25 °C of 3000-4000 mPa.s. DA-502 is used in base for EPI wood glue systems, as a base emulsion for floor, wall or ceiling adhesives, and plastic (PVC) or metal foil bonding. 收起 | |
| DA-511 | DCC (Dairen Chemical Corp.) | DA-511 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-511 forms a flexible film with adhesive properties for a broad range of applications. It has a viscosit...展开 DA-511 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-511 forms a flexible film with adhesive properties for a broad range of applications. It has a viscosity at 25 °C of 1500-2500 mPa.s. DA-511 is used in base for EPI wood glue systems, as a base emulsion for floor, wall or ceiling adhesives, and plastic (PVC) or metal foil bonding. 收起 | |
| DA-523 | DCC (Dairen Chemical Corp.) | DA-523 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-523 forms a flexible film with adhesive properties for a broad range of applications. It has a viscosit...展开 DA-523 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-523 forms a flexible film with adhesive properties for a broad range of applications. It has a viscosity at 25 °C of 700-1000 mPa.s. DA-523 is used in base for EPI wood glue systems, as a base emulsion for floor, wall or ceiling adhesives, and plastic (PVC) or metal foil bonding. 收起 | |
| DA-524 | DCC (Dairen Chemical Corp.) | DA-524 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-524 forms a tough but still flexible film with adhesive properties for a broad range of applications. I...展开 DA-524 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-524 forms a tough but still flexible film with adhesive properties for a broad range of applications. It has a viscosity at 25 °C of 1500-2500 mPa.s. DA-524 is used in base for EPI wood glue systems, as a base emulsion for floor, wall or ceiling adhesives, and plastic (PVC) or metal foil bonding. 收起 | |
| DA-6200 | DCC (Dairen Chemical Corp.) | DA-6200 is a water re-dispersible powder based on vinyl acetate/ethylene copolymer containing polyvinyl alcohol as a protective colloid. DA-6200 contains a fine mineral filler as an anti-blocking agent. It is free of solvents, plasticizers and film-formin...展开 DA-6200 is a water re-dispersible powder based on vinyl acetate/ethylene copolymer containing polyvinyl alcohol as a protective colloid. DA-6200 contains a fine mineral filler as an anti-blocking agent. It is free of solvents, plasticizers and film-forming agents. DA-6200 is recommended for blending with inorganic binders such as cement, hydrated lime to modify mortar hydration systems, tile adhesives, EIFS, and finishing plasters. 收起 | |
| DA-652 | DCC (Dairen Chemical Corp.) | DA-652 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, the extra viscous DA-652 forms a flexible film with adhesive properties for a broad range of applications....展开 DA-652 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, the extra viscous DA-652 forms a flexible film with adhesive properties for a broad range of applications. It has a viscosity at 25 °C of 15000-25000 mPa.s. DA-652 is used as base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-691 | DCC (Dairen Chemical Corp.) | DA-691 is a non-plasticized, aqueous, milky white, cross-linkable copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-691 forms a flexible and soft film. It has a viscosity at 25 °C of 100-500 mPa.s. DA-691...展开 DA-691 is a non-plasticized, aqueous, milky white, cross-linkable copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-691 forms a flexible and soft film. It has a viscosity at 25 °C of 100-500 mPa.s. DA-691's main use is in EPI wood glue. 收起 | |
| DA-901 | DCC (Dairen Chemical Corp.) | DA-901 is a non-plasticized, aqueous, milky white terpolymer dispersion based on vinyl chloride, vinyl acetate and ethylene. Due to it's low Tg levels it provides a soft transparent film. It is generally used as an adhesive and provides a fire retardant p...展开 DA-901 is a non-plasticized, aqueous, milky white terpolymer dispersion based on vinyl chloride, vinyl acetate and ethylene. Due to it's low Tg levels it provides a soft transparent film. It is generally used as an adhesive and provides a fire retardant property. DA-901 is used as a general adhesive and is specially suitable for wood applications. 收起 | |
| DA-908 | DCC (Dairen Chemical Corp.) | DA-908 is an aqueous, milky white terpolymer dispersion based on vinyl chloride, vinyl acetate and ethylene. DA-908 leads to a clear film with low surface tack, and resistance to water, alkali, solvents, light, and aging. It has a Tg value of 20-30 °C and...展开 DA-908 is an aqueous, milky white terpolymer dispersion based on vinyl chloride, vinyl acetate and ethylene. DA-908 leads to a clear film with low surface tack, and resistance to water, alkali, solvents, light, and aging. It has a Tg value of 20-30 °C and is a cloudy substance initially. DA-908 is used as a base emulsion for general adhesives and EPI wood adhesives. 收起 | |
| DA-910 | DCC (Dairen Chemical Corp.) | DA-910 is a copolymer of Ethylene and Vinyl Chloride with amide functionality. It has fire retardant, water, and alkali resistance properties. It has a Tg rating of between -2 and 2 °C. DA-910 can be used as a base sealant emulsion in non-woven fabrics an...展开 DA-910 is a copolymer of Ethylene and Vinyl Chloride with amide functionality. It has fire retardant, water, and alkali resistance properties. It has a Tg rating of between -2 and 2 °C. DA-910 can be used as a base sealant emulsion in non-woven fabrics and paper binder, paper and fabric impregnation binder, flocking binder, car sheet and carpet back coating, and adhesive for high frequency curing. 收起 | |
| DA-920 | DCC (Dairen Chemical Corp.) | DA-920 is a copolymer of Ethylene and Vinyl Chloride with amide functionality. It has fire retardant, water, and alkali resistance properties. It has a Tg rating of between 18 and 22 °C. DA-920 can be used as a base sealant emulsion in non-woven fabrics a...展开 DA-920 is a copolymer of Ethylene and Vinyl Chloride with amide functionality. It has fire retardant, water, and alkali resistance properties. It has a Tg rating of between 18 and 22 °C. DA-920 can be used as a base sealant emulsion in non-woven fabrics and paper binder, paper and fabric impregnation binder, flocking binder, car sheet and carpet back coating, and adhesive for high frequency curing. 收起 | |
| DA-930 | DCC (Dairen Chemical Corp.) | DA-930 is a copolymer of Ethylene and Vinyl Chloride with amide functionality. It has fire retardant, water, and alkali resistance properties. It has a Tg rating of between 28 and 32 °C. DA-930 can be used as a base sealant emulsion in non-woven fabrics a...展开 DA-930 is a copolymer of Ethylene and Vinyl Chloride with amide functionality. It has fire retardant, water, and alkali resistance properties. It has a Tg rating of between 28 and 32 °C. DA-930 can be used as a base sealant emulsion in non-woven fabrics and paper binder, paper and fabric impregnation binder, flocking binder, car sheet and carpet back coating, and adhesive for high frequency curing. 收起 | |
| DYHARD® 100 | AlzChem AG | DYHARD® 100 is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations...展开 DYHARD® 100 is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations and to improve handling. The products of the DYHARD® 100 series do not react with epoxy resins at moderate temperatures. Dispersed in epoxy resin the mixture remains stable until activated by heat. 收起 | |
| DYHARD® 100S | AlzChem AG | DYHARD® 100S is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomeration...展开 DYHARD® 100S is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations and to improve handling. The products of the DYHARD® 100 series do not react with epoxy resins at moderate temperatures. Dispersed in epoxy resin the mixture remains stable until activated by heat. 收起 | |
| DYHARD® 100SF | AlzChem AG | DYHARD® 100SF is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomeratio...展开 DYHARD® 100SF is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations and to improve handling. The products of the DYHARD® 100 series do not react with epoxy resins at moderate temperatures. Dispersed in epoxy resin the mixture remains stable until activated by heat. 收起 | |
| DYHARD® 100SH | AlzChem AG | DYHARD® 100SH is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomeratio...展开 DYHARD® 100SH is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations and to improve handling. The products of the DYHARD® 100 series do not react with epoxy resins at moderate temperatures. Dispersed in epoxy resin the mixture remains stable until activated by heat. 收起 | |
| DYHARD® A5M30 | AlzChem AG | DYHARD® A5M30 is widely used as a highly active but also latent accelerator master batch of DYHARD® UR500 in thermosetting epoxy resin formulations. It is especially designed for dust free work environments and easy to mix in productions | |
| DYHARD® CAAB | AlzChem AG | DYHARD® CAAB is a curing agent for matt finish powder coatings based on epoxy or epoxy-polyester hybrid formulations. Usually it is used together with DYHARD® PIN to realize these matt finishes. For low gloss applications the optimal mixing ratio between ...展开 DYHARD® CAAB is a curing agent for matt finish powder coatings based on epoxy or epoxy-polyester hybrid formulations. Usually it is used together with DYHARD® PIN to realize these matt finishes. For low gloss applications the optimal mixing ratio between DYHARD® PIN and DYHARD® CAAB is 45:55. This ideal mixture is also available in the ready to use premix DYHARD® PMC for an easy handling. 收起 | |
| DYHARD® D50EP | AlzChem AG | DYHARD® D50EP is a master batch of 50% DYHARD® 100S in standard bisphenol A epoxy resin (EEW 182-192). Advantages include a dust-free production environment, as well as easier dosage and incorporation. It is cost-effective due to easy handling, and offers...展开 DYHARD® D50EP is a master batch of 50% DYHARD® 100S in standard bisphenol A epoxy resin (EEW 182-192). Advantages include a dust-free production environment, as well as easier dosage and incorporation. It is cost-effective due to easy handling, and offers the same reactivity, latency, and mechanical properties as the DYHARD® 100 series. This product is recommended for one-component thermosetting epoxy resin formulations for the automotive, sporting goods, and aerospace industry, for adhesives, for encapsulation compounds, and more. 收起 | |
| DYHARD® DF50EP | AlzChem AG | DYHARD® DF50EP is a master batch of 50% DYHARD® 100SF in standard bisphenol A epoxy resin (EEW 182-192). Products of the DYHARD® master batches are widely used for all kinds of one component thermosetting epoxy resin formulations | |
| DYHARD® Fluid 111 | AlzChem AG | DYHARD® Fluid 111 is a liquid latent curing agent for thermosetting epoxy resin formulations. | |
| DYHARD® Fluid 151 | AlzChem AG | DYHARD® Fluid 151 is part of a fully formulated latent epoxy resin system, which has been specifically designed for resin transfer molding applications. | |
| DYHARD® Fluid 212 | AlzChem AG | DYHARD® Fluid 212 is a liquid latent curing agent. It features a long pot life in the impregnation bath, a rapid cure at 120ºC, optical clearness, and high transparency. This makes it ideal for use in filament winding applications. | |
| DYHARD® Fluid AC11 | AlzChem AG | DYHARD® Fluid AC11 is part of a fully formulated latent epoxy resin system, which has been specifically designed for resin transfer molding applications. | |
| DYHARD® MCA10 | AlzChem AG | DYHARD® MCA10 is a special formulated curing agent for low temperature cure, or very fast cure at standard cure temperatures. A formulated 1K-Epoxy resins system with DYHARD® MCA10 still has an acceptable long latency of a few weeks at room temperature. | |
| DYHARD® MCA30 | AlzChem AG | DYHARD® MCA30 is a non toxic, special formulated curing agent for low temperature cure, high gloss epoxy powder coatings. | |
| DYHARD® MI-C | AlzChem AG | DYHARD® MI-C is used as a very active but also reasonably latent accelerator in thermosetting epoxy resin formulations. It is typically used for fast curing, or low temperature cure, resin systems with low latency requirements. | |
| DYHARD® MI-FF | AlzChem AG | DYHARD® MI-FF is used as a very active but also reasonably latent accelerator in thermosetting epoxy resin formulations. It is typically used for fast curing, or low temperature cure, resin systems with low latency requirements. | |
| DYHARD® MIA5 | AlzChem AG | DYHARD® MIA5 is used as a very active but also reasonably latent accelerator in thermosetting epoxy resin formulations. It’s use is particularly suited in combination with micronized dicyandiamide from the DYHARD® CU-Line, or with the dicyandiamide master...展开 DYHARD® MIA5 is used as a very active but also reasonably latent accelerator in thermosetting epoxy resin formulations. It’s use is particularly suited in combination with micronized dicyandiamide from the DYHARD® CU-Line, or with the dicyandiamide master batches from the DYHARD® MB-Line. 收起 | |
| DYHARD® OTB | AlzChem AG | DYHARD® OTB represents a medium reactive curing agent for high gloss epoxy powder coatings. With it’s ideal distribution properties in epoxy resins high quality finishes at low curing temperatures are provided. | |
| DYHARD® PI | AlzChem AG | DYHARD® PI represents an imidazole based accelerator and/or hardener for thermosetting epoxy resin systems. It has a larger particle size than DYHARD® PI-FF, which is more suitable where lower reactiviy's are needed. | |
| DYHARD® PI-FF | AlzChem AG | DYHARD® PI-FF represents an imidazole based accelerator and/or hardener for thermosetting epoxy resin systems. DYHARD® PI-FF has a smaller particle size than DYHARD® PI and hence is more suitable where higher reactivity's are needed. | |
| DYHARD® PIN | AlzChem AG | DYHARD® PIN represents a curing agent which is used in low gloss epoxy and epoxy-polyester hybrid powder coatings. It’s ideal distribution properties in both resin systems provides high quality finishes with a very good color stability. | |
| DYHARD® PMC | AlzChem AG | DYHARD® PMC represents a matt curing agent for low gloss epoxy and epoxy-polyester hybrid powder coatings. With its ideal distribution properties in both resins systems, high quality finishes with a very good color stability are provided. | |
| DYHARD® RF1000 | AlzChem AG | DYHARD® RF1000 is part of a fully formulated latent epoxy resin system, which has been specifically designed for resin transfer molding applications. | |
| DYHARD® RF2100 | AlzChem AG | DYHARD® RF2100 is a low viscos modified bisphenol A epoxy resin. It features a long pot life in the impregnation bath, a rapid cure at 120ºC, optical clearness, and high transparency. This makes it ideal for use in filament winding applications. | |
| DYHARD® UR200 | AlzChem AG | DYHARD® UR200 represents a latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. | |
| DYHARD® UR300 | AlzChem AG | DYHARD® UR300 represents a latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. | |
| DYHARD® UR300AB | AlzChem AG | DYHARD® UR300AB represents a latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. | |
| DYHARD® UR400 | AlzChem AG | DYHARD® UR400 represents a bi-functional, micronized accelerator based on a substituted urea. Being an active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in...展开 DYHARD® UR400 represents a bi-functional, micronized accelerator based on a substituted urea. Being an active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. 收起 | |
| DYHARD® UR500 | AlzChem AG | DYHARD® UR500 represents a bi-functional, micronized accelerator based on a substituted urea. Being a highly active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 ser...展开 DYHARD® UR500 represents a bi-functional, micronized accelerator based on a substituted urea. Being a highly active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. 收起 | |
| DYHARD® UR700 | AlzChem AG | DYHARD® UR700 represents a highly latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. In addit...展开 DYHARD® UR700 represents a highly latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. In addition, DYHARD® UR700 is soluble in water, which makes it a preferred accelerator for waterborne applications. 收起 | |
| DYHARD® UR800 | AlzChem AG | DYHARD® UR800 represents a very latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. | |
| DYHARD® URAcc13 | AlzChem AG | DYHARD® URAcc13 represents a formulated latent, micronized accelerator based on a substituted urea. Being an active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 ser...展开 DYHARD® URAcc13 represents a formulated latent, micronized accelerator based on a substituted urea. Being an active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. 收起 | |
| DYHARD® URAcc57 | AlzChem AG | DYHARD® URAcc57 represents a latent, micronized accelerator based on a substituted urea. Being a very highly active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 ser...展开 DYHARD® URAcc57 represents a latent, micronized accelerator based on a substituted urea. Being a very highly active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. 收起 | |
| EMULTROL DFM AFO-3 | Concentrol, S.A., Productos | EMULTROL DFM AFO-3 is an emineral oil defoamer for emulsion paints and coatings, also indicated for use during the production process of emulsions. It is specially formulated for application in the textile sector for chemical products and industrial proce...展开 EMULTROL DFM AFO-3 is an emineral oil defoamer for emulsion paints and coatings, also indicated for use during the production process of emulsions. It is specially formulated for application in the textile sector for chemical products and industrial processes. It is a stable product, compatible with most chemical products over a wide pH spectrum. It is a non-ionic emulsion, free of alkylphenols and ethoxylates. Excellent dispersing performance in foaming systems. 收起 | |
| EMULTROL DFM AFO-5 | Concentrol, S.A., Productos | EMULTROL DFM AFO-5 is an emulsion of hydrophobic substances in vegetable oils. It has been specially formulated for use in textile, chemical and general industrial processes. Its main applications are in the field of wastewater treatment plants. This high...展开 EMULTROL DFM AFO-5 is an emulsion of hydrophobic substances in vegetable oils. It has been specially formulated for use in textile, chemical and general industrial processes. Its main applications are in the field of wastewater treatment plants. This highly stable product is compatible with a wide range of chemical products over wide pH range. 收起 | |
| EMULTROL DFM AFO-6 | Concentrol, S.A., Productos | EMULTROL DFM AFO-6 is a mineral oil based defoamer for paints and coatings, also indicated for use during the production process of emulsions. EMULTROL DFM AFO-6 is specially formulated for application in the textile sector for chemical products and indus...展开 EMULTROL DFM AFO-6 is a mineral oil based defoamer for paints and coatings, also indicated for use during the production process of emulsions. EMULTROL DFM AFO-6 is specially formulated for application in the textile sector for chemical products and industrial processes. It is a stable product, compatible with most chemical products over a wide pH range. It is a non-ionic emulsion, free of alkylphenols and ethoxylates. Excellent dispersing performance in foaming systems. Its effect is maintained over a wide time span, making it unnecessary to constantly repeat dosage. 收起 | |
| EMULTROL DFM AFO-7 | Concentrol, S.A., Productos | EMULTROL DFM AFO-7 defoamer has been specially formulated for being used in textile, chemical and general industrial processes. Non-ionic emulsion, free from alkylphenols ethoxylates. Excellent dispersion in foaming systems. Highly stable product, compati...展开 EMULTROL DFM AFO-7 defoamer has been specially formulated for being used in textile, chemical and general industrial processes. Non-ionic emulsion, free from alkylphenols ethoxylates. Excellent dispersion in foaming systems. Highly stable product, compatible with a wide range of chemical products over wide pH range. Its long term foam inhibition effect permits usage of low dosages. 收起 | |
| EMULTROL DFM CP-1 | Concentrol, S.A., Productos | EMULTROL DFM CP-1 is a highly stable silicone antifoam compound formulated to control foam creation in aqueous systems. | |
| EMULTROL DFM CP-14 | Concentrol, S.A., Productos | EMULTROL DFM CP-14 is a silicone antifoam compound, mainly for a wide range of aqueous and nonaqueous industrial applications. | |
| EMULTROL DFM CP-6 | Concentrol, S.A., Productos | EMULTROL DFM CP-6 is a silicone anti-foam compound, mainly for textile applications where a water dispersible anti-foam is needed. | |
| EMULTROL DFM CP-8 | Concentrol, S.A., Productos | EMULTROL DFM CP-8 is a silicone anti-foam compound, mainly for kraft and sulfite process stock washing. Emulsifiable anti-foam concentrate which can be used in very small dosage compared with traditional oil-based anti-foams. | |
| EMULTROL DFM DV-1 | Concentrol, S.A., Productos | EMULTROL DFM DV-1 antifoam emulsion has been formulated for use in general industrial processes, formulation of chemical products and wastewater treatment plants. The product can be used in textile sector, showing good compatibility with dye stuffs, surfa...展开 EMULTROL DFM DV-1 antifoam emulsion has been formulated for use in general industrial processes, formulation of chemical products and wastewater treatment plants. The product can be used in textile sector, showing good compatibility with dye stuffs, surfactants and textile auxiliaries. Control foams in the processes of dyeing, printing, bleaching, scouring, finishing and sizing. 收起 | |
| EMULTROL DFM DV-110 | Concentrol, S.A., Productos | EMULTROL DFM DV-110 antifoam has been formulated for use in general industrial processes in very low concentrations. | |
| EMULTROL DFM DV-25 | Concentrol, S.A., Productos | EMULTROL DFM DV-25 antifoam emulsion has been specially formulated for use in textile, chemical and general industrial processes. Highly stable product, compatible with a wide range of chemical products over wide pH range. Excellent dispersion in foaming ...展开 EMULTROL DFM DV-25 antifoam emulsion has been specially formulated for use in textile, chemical and general industrial processes. Highly stable product, compatible with a wide range of chemical products over wide pH range. Excellent dispersion in foaming systems. Its long term foam inhibition effect permits usage of a single dose, with no necessity for further additions. 收起 | |
| EMULTROL DFM DV-8 P | Concentrol, S.A., Productos | EMULTROL DFM DV-8 P antifoam emulsion has been specially formulated for use in textile, chemical and general industrial processes. The product has been specially formulated in order to cover the requirements in waste-water treatment plants. | |
| EMULTROL DFM OL-4 | Concentrol, S.A., Productos | EMULTROL DFM OL-4 antifoaming has been specially formulated for use in chemical and general industrial processes. Highly stable product, compatible with a wide range of chemical products over wide pH range. Excellent dispersion in foaming systems. Its lon...展开 EMULTROL DFM OL-4 antifoaming has been specially formulated for use in chemical and general industrial processes. Highly stable product, compatible with a wide range of chemical products over wide pH range. Excellent dispersion in foaming systems. Its long term foam inhibition effect permits usage of a single dose, with no necessity for further additions. 收起 | |
| EMULTROL DFM OL-9 | Concentrol, S.A., Productos | EMULTROL DFM OL-9 has been specially formulated to be used in sistems with high superficial foam formation usually found in paper pulp processes. It is a stable product, compatible with most chemical products over a wide pH spectrum. Its effect is maintai...展开 EMULTROL DFM OL-9 has been specially formulated to be used in sistems with high superficial foam formation usually found in paper pulp processes. It is a stable product, compatible with most chemical products over a wide pH spectrum. Its effect is maintained over a wide time span, making it unnecessary to constantly repeat dosage. EMULTROL DFM OL-9 should be added at a point of high agitation to ensure a good dispersion. The dosage of application is between 50 and 800 grams per ton of paper manufactured, depending on the grade and type of foam. 收起 |
