| 2-Ethylhexanoic Acid | Penpet Petrochemical Trading GmbH | 2-Ethylhexanoic Acid, in the form of a dense, clear, colourless to yellow liquid with a faint odour, is a catalyst that can be used in the dye and paint, and printing ink industry. This product is insoluble in water but is soluble in almost all conventio...展开 2-Ethylhexanoic Acid, in the form of a dense, clear, colourless to yellow liquid with a faint odour, is a catalyst that can be used in the dye and paint, and printing ink industry. This product is insoluble in water but is soluble in almost all conventional solvents. Most of its siccatives are metal salts that can be used as drying agents. 收起 | |
| 3-(Trimethoxysilyl)propyl Glycidyl Ether | Penpet Petrochemical Trading GmbH | 3-(Trimethoxysilyl)propyl Glycidyl Ether, in the form of a clear, pale yellow liquid, is an epoxy-functional silane that can be used in polyurethane caulks and sealants. This product can also be used as a coupling agent in polysulfides, in mineral-filled...展开 3-(Trimethoxysilyl)propyl Glycidyl Ether, in the form of a clear, pale yellow liquid, is an epoxy-functional silane that can be used in polyurethane caulks and sealants. This product can also be used as a coupling agent in polysulfides, in mineral-filled or glass-reinforced thermosets and thermoplastics. 收起 | |
| Acetone | Penpet Petrochemical Trading GmbH | Acetone, in the form of a colourless, clear liquid, is a basic raw material in the chemical industry that can be used in paint thinner. This product is soluble in water and is usually used as a laboratory solvent. | |
| Adipic Acid | Penpet Petrochemical Trading GmbH | Adipic Acid, in the form of a white crystalline powder, is a dicarbon acid and an intermediate in the production of nylon. It can be used in adhesives, plasticizers, and as a dyestuff or coloring agent. This product is a primary intermediate for the syn...展开 Adipic Acid, in the form of a white crystalline powder, is a dicarbon acid and an intermediate in the production of nylon. It can be used in adhesives, plasticizers, and as a dyestuff or coloring agent. This product is a primary intermediate for the synthesis of polyetherpolyole for polyurethane systems and for thermoplastic polyurethane. 收起 | |
| Diisodecylphthalate | Penpet Petrochemical Trading GmbH | Diisodecylphthalate, in the form of a colourless and nearly odourless fluid, is an organic compound that can be used in glues, paints, solvents and sealants. This product is normally used as a plasticizer for PVC. | |
| Diisononyl Phthalate (DINP) | Penpet Petrochemical Trading GmbH | Diisononyl Phthalate (DINP), in the form of a colourless and a nearly odourless fluid, is a phthalate and an organic chemical compound that can be used in glues, paints, solvents, and sealants. This product is mostly used as a plasticizer for PVC. | |
| Dioctylphthalate (DOTP) | Penpet Petrochemical Trading GmbH | Dioctylphthalate (DOTP), in the form of a colorless, odourless fluid, is a phthalate and an organic chemical compound. This product can be used in solvents and varnish. It is normally used as a plasticizer. | |
| Epoxidized Soybean Oil (ESBO) | Penpet Petrochemical Trading GmbH | Epoxidized Soybean Oil (ESBO), in the form of a light yellow, thick, oily liquid, is a plasticizer than can be used in oil paints, adhesives, and printing inks. This product is derived from soybean oil through the reaction of unsaturated compounds with p...展开 Epoxidized Soybean Oil (ESBO), in the form of a light yellow, thick, oily liquid, is a plasticizer than can be used in oil paints, adhesives, and printing inks. This product is derived from soybean oil through the reaction of unsaturated compounds with peracids. Its boiling point is 150°C with an ignition point at 310°C. 收起 | |
| Fumaric Acid | Penpet Petrochemical Trading GmbH | Fumaric Acid, in the form of a colourless fluid, is produced by the isomerization of maleic acid. This product can be used in paper sizing and in glues. It is sometimes known as 2-Butendioic acid and can also be used in synthetic resins, unsaturated pol...展开 Fumaric Acid, in the form of a colourless fluid, is produced by the isomerization of maleic acid. This product can be used in paper sizing and in glues. It is sometimes known as 2-Butendioic acid and can also be used in synthetic resins, unsaturated polyester resins, and in lubricants. 收起 | |
| GH-AS-C2 | SICHUAN GUOHE NEW MATERIALS CO., LTD. | GH-AS-C2, in the form of a clear yellow solution, is acrylic resin for white and color reverse-printing inks that has suitable solvents in alcohol, esters, and alcohol-water. It has good print-ability, high compatibility, with high overprint of compatibil...展开 GH-AS-C2, in the form of a clear yellow solution, is acrylic resin for white and color reverse-printing inks that has suitable solvents in alcohol, esters, and alcohol-water. It has good print-ability, high compatibility, with high overprint of compatibility with the chlorinated polyurethane and polypropylene lamination printing inks. 收起 | |
| GH-AS-C2-F | SICHUAN GUOHE NEW MATERIALS CO., LTD. | GH-AS-C2-F, in the form of a clear yellow solution, is acrylic resin for white and color reverse-printing inks that has suitable solvents in alcohol, esters, and alcohol-water. It has good dispersion, good print-ability, and high compatibility, with high ...展开 GH-AS-C2-F, in the form of a clear yellow solution, is acrylic resin for white and color reverse-printing inks that has suitable solvents in alcohol, esters, and alcohol-water. It has good dispersion, good print-ability, and high compatibility, with high overprint of compatibility with the chlorinated polyurethane and polypropylene lamination printing inks. 收起 | |
| GH-AS-C2-Q | SICHUAN GUOHE NEW MATERIALS CO., LTD. | GH-AS-C2-Q, in the form of a clear yellow solution, is acrylic resin for white and color reverse-printing inks that has suitable solvents in alcohol, esters, and alcohol-water. It has good solvent release, good print-ability, and high compatibility, with ...展开 GH-AS-C2-Q, in the form of a clear yellow solution, is acrylic resin for white and color reverse-printing inks that has suitable solvents in alcohol, esters, and alcohol-water. It has good solvent release, good print-ability, and high compatibility, with high overprint of compatibility with the chlorinated polyurethane and polypropylene lamination printing inks. 收起 | |
| GH-AS-D | SICHUAN GUOHE NEW MATERIALS CO., LTD. | GH-AS-D, in the form of a clear sticky solution, is a polyurethane modified acrylic resin. It is applicable to the production of alcohol and water-soluble gravure printing ink for extrusion lamination with environmental protection. | |
| GH-AS-SY-X | SICHUAN GUOHE NEW MATERIALS CO., LTD. | GH-AS-SY-X, in the form of a clear sticky solution, is acrylic resin for white printing ink that has suitable solvents in alcohol, esters, and alcohol-water. It has a higher dilution ratio than the other GH-AS-W products and has good print-ability, high c...展开 GH-AS-SY-X, in the form of a clear sticky solution, is acrylic resin for white printing ink that has suitable solvents in alcohol, esters, and alcohol-water. It has a higher dilution ratio than the other GH-AS-W products and has good print-ability, high compatibility, with high overprint of compatibility with the chlorinated polyurethane and polypropylene lamination printing inks. 收起 | |
| GH-AS-W | SICHUAN GUOHE NEW MATERIALS CO., LTD. | GH-AS-W, in the form of a clear sticky solution, is a general type acrylic resin for white printing ink that has suitable solvents in alcohol, esters, and alcohol-water. It has good print-ability and high compatibility, with high overprint of compatibilit...展开 GH-AS-W, in the form of a clear sticky solution, is a general type acrylic resin for white printing ink that has suitable solvents in alcohol, esters, and alcohol-water. It has good print-ability and high compatibility, with high overprint of compatibility with the chlorinated polyurethane and polypropylene lamination printing inks. 收起 | |
| GH-AS-W-Q | SICHUAN GUOHE NEW MATERIALS CO., LTD. | GH-AS-W-Q, in the form of a clear sticky solution, is acrylic resin for white printing ink that has suitable solvents in alcohol, esters, and alcohol-water. It has a better solvent release than GH-AS-W and has good print-ability and high compatibility, wi...展开 GH-AS-W-Q, in the form of a clear sticky solution, is acrylic resin for white printing ink that has suitable solvents in alcohol, esters, and alcohol-water. It has a better solvent release than GH-AS-W and has good print-ability and high compatibility, with high overprint of compatibility with the chlorinated polyurethane and polypropylene lamination printing inks. 收起 | |
| GH-AS-W2A | SICHUAN GUOHE NEW MATERIALS CO., LTD. | GH-AS-W2A, in the form of a clear sticky solution, is acrylic resin for white printing ink that has suitable solvents in alcohol, esters, and alcohol-water. It has a better solvent release than the other GH-AS-W products and has good print-ability, high c...展开 GH-AS-W2A, in the form of a clear sticky solution, is acrylic resin for white printing ink that has suitable solvents in alcohol, esters, and alcohol-water. It has a better solvent release than the other GH-AS-W products and has good print-ability, high compatibility, with high overprint of compatibility with the chlorinated polyurethane and polypropylene lamination printing inks. 收起 | |
| GH-ASJ | SICHUAN GUOHE NEW MATERIALS CO., LTD. | GH-ASJ, in the form of a clear yellow solution, is a general type polyurethane modified acrylic resin for white and color reverse-printing inks that has suitable solvents in alcohol, esters, and alcohol-water. It has good print-ability and high compatibil...展开 GH-ASJ, in the form of a clear yellow solution, is a general type polyurethane modified acrylic resin for white and color reverse-printing inks that has suitable solvents in alcohol, esters, and alcohol-water. It has good print-ability and high compatibility, with high overprint of compatibility with the chlorinated polyurethane and polypropylene lamination printing inks. 收起 | |
| GH-ASJ-2 | SICHUAN GUOHE NEW MATERIALS CO., LTD. | GH-ASJ-2, in the form of a clear yellow solution, is a general type polyurethane modified acrylic resin for white and color reverse-printing inks that has suitable solvents in alcohol, esters, and alcohol-water. It has good dispersion, good print-ability,...展开 GH-ASJ-2, in the form of a clear yellow solution, is a general type polyurethane modified acrylic resin for white and color reverse-printing inks that has suitable solvents in alcohol, esters, and alcohol-water. It has good dispersion, good print-ability, and high compatibility, with high overprint of compatibility with the chlorinated polyurethane and polypropylene lamination printing inks. 收起 | |
| GH-ASJB-4 | SICHUAN GUOHE NEW MATERIALS CO., LTD. | GH-ASJB-4, in the form of a clear yellow solution, is a modified acrylic resin that is applicable to the production of green environmental protection and high printing suitable alcohol or alcohol-water-soluble gravure surface-printing inks. This product h...展开 GH-ASJB-4, in the form of a clear yellow solution, is a modified acrylic resin that is applicable to the production of green environmental protection and high printing suitable alcohol or alcohol-water-soluble gravure surface-printing inks. This product has low viscosity (700 to 1200 mPas), no dispersing agent needed, and good print-ability. 收起 | |
| GH-ASJB-4Y | SICHUAN GUOHE NEW MATERIALS CO., LTD. | GH-ASJB-4Y, in the form of a clear yellow solution, is a modified acrylic resin that is applicable to the production of green environmental protection and high printing suitable alcohol or alcohol-water-soluble gravure surface-printing inks. This product ...展开 GH-ASJB-4Y, in the form of a clear yellow solution, is a modified acrylic resin that is applicable to the production of green environmental protection and high printing suitable alcohol or alcohol-water-soluble gravure surface-printing inks. This product has high viscosity (2000 to 4000 mPas), a dispersing agent is needed, and has good print-ability. 收起 | |
| GH-ASJB-4Y-2 | SICHUAN GUOHE NEW MATERIALS CO., LTD. | GH-ASJB-4Y-2, in the form of a clear yellow solution, is a modified acrylic resin that is applicable to the production of green environmental protection and high printing suitable alcohol or alcohol-water-soluble gravure surface-printing inks. This produc...展开 GH-ASJB-4Y-2, in the form of a clear yellow solution, is a modified acrylic resin that is applicable to the production of green environmental protection and high printing suitable alcohol or alcohol-water-soluble gravure surface-printing inks. This product has high viscosity (2000 to 4000 mPas), a dispersing agent is needed, and has good print-ability. 收起 | |
| GH-ASJG-A | SICHUAN GUOHE NEW MATERIALS CO., LTD. | GH-ASJG-A, in the form of a clear solution, is a ketone and benzene free environment-friendly two-component glazing oil resin. It has a viscosity of 1500 to 3000 mPas at 25°C and when using esters as the solvent, it is a coating adhesive and resin suitabl...展开 GH-ASJG-A, in the form of a clear solution, is a ketone and benzene free environment-friendly two-component glazing oil resin. It has a viscosity of 1500 to 3000 mPas at 25°C and when using esters as the solvent, it is a coating adhesive and resin suitable for PET, PVC, BOPP, PE, VMPET, aluminum film, paper, etc. 收起 | |
| GH-ASJG-B | SICHUAN GUOHE NEW MATERIALS CO., LTD. | GH-ASJG-B, in the form of a clear solution, is a ketone and benzene free environment-friendly two-component glazing oil resin. It has a viscosity of less than 100 mPas at 25°C and when using esters as the solvent, it is a coating adhesive and resin suitab...展开 GH-ASJG-B, in the form of a clear solution, is a ketone and benzene free environment-friendly two-component glazing oil resin. It has a viscosity of less than 100 mPas at 25°C and when using esters as the solvent, it is a coating adhesive and resin suitable for PET, PVC, BOPP, PE, VMPET, aluminum film, paper, etc. 收起 | |
| GH-FF | SICHUAN GUOHE NEW MATERIALS CO., LTD. | GH-FF, in the form of a clear solution, is a kind of green environmental protection, anti-corrosion coatings resin. It has good anti-corrosive performance and can be widely applied to anti-corrosion coating, in the metal. | |
| GH-OH-1015 | SICHUAN GUOHE NEW MATERIALS CO., LTD. | GH-OH-1015, in the form of a clear colorless to pale yellow sticky solution, is a green environmental protection hydroxyl acrylic resin. It has a viscosity of 1500 to 3000 mPas, is quick drying, good adhesive strength, gloss, and is suitable for intermedi...展开 GH-OH-1015, in the form of a clear colorless to pale yellow sticky solution, is a green environmental protection hydroxyl acrylic resin. It has a viscosity of 1500 to 3000 mPas, is quick drying, good adhesive strength, gloss, and is suitable for intermediate and top coatings of metal and plastics, and primer. 收起 | |
| GH-OH-1503 | SICHUAN GUOHE NEW MATERIALS CO., LTD. | GH-OH-1503, in the form of a clear colorless to pale yellow sticky solution, is a green environmental protection hydroxyl acrylic resin. It has a viscosity of 1000 to 2000 mPas, is quick drying, good adhesive strength, gloss, and is suitable for intermedi...展开 GH-OH-1503, in the form of a clear colorless to pale yellow sticky solution, is a green environmental protection hydroxyl acrylic resin. It has a viscosity of 1000 to 2000 mPas, is quick drying, good adhesive strength, gloss, and is suitable for intermediate and top coatings of metal and plastics, and primer. 收起 | |
| GH-OH-2607 | SICHUAN GUOHE NEW MATERIALS CO., LTD. | GH-OH-2607, in the form of a clear colorless to pale yellow sticky solution, is a green environmental protection hydroxyl acrylic resin. It has a viscosity of 5500 to 7500 mPas, is quick drying, good adhesive strength, gloss, and is suitable for intermedi...展开 GH-OH-2607, in the form of a clear colorless to pale yellow sticky solution, is a green environmental protection hydroxyl acrylic resin. It has a viscosity of 5500 to 7500 mPas, is quick drying, good adhesive strength, gloss, and is suitable for intermediate and top coatings of metal and plastics, and primer. 收起 | |
| GH-OH-3005 | SICHUAN GUOHE NEW MATERIALS CO., LTD. | GH-OH-3005, in the form of a clear colorless to pale yellow sticky solution, is a green environmental protection hydroxyl acrylic resin. It has a viscosity of 1000 to 2000 mPas, is quick drying, good adhesive strength, gloss, and is suitable for intermedi...展开 GH-OH-3005, in the form of a clear colorless to pale yellow sticky solution, is a green environmental protection hydroxyl acrylic resin. It has a viscosity of 1000 to 2000 mPas, is quick drying, good adhesive strength, gloss, and is suitable for intermediate and top coatings of metal and plastics, and primer. 收起 | |
| GH-OH-4007 | SICHUAN GUOHE NEW MATERIALS CO., LTD. | GH-OH-4007, in the form of a clear colorless to pale yellow sticky solution, is a green environmental protection hydroxyl acrylic resin. It has a viscosity of 5000 to 7000 mPas, is quick drying, good adhesive strength, gloss, and is suitable for intermedi...展开 GH-OH-4007, in the form of a clear colorless to pale yellow sticky solution, is a green environmental protection hydroxyl acrylic resin. It has a viscosity of 5000 to 7000 mPas, is quick drying, good adhesive strength, gloss, and is suitable for intermediate and top coatings of metal and plastics, and primer. 收起 | |
| GH-PU-1 | SICHUAN GUOHE NEW MATERIALS CO., LTD. | GH-PU-1, in the form of a clear sticky solution, is an environment-friendly polyurethane resin that does not contain benzene, toluene, and ketone. It has good print-ability and high compatibility, with high overprint of compatibility with the chlorinated ...展开 GH-PU-1, in the form of a clear sticky solution, is an environment-friendly polyurethane resin that does not contain benzene, toluene, and ketone. It has good print-ability and high compatibility, with high overprint of compatibility with the chlorinated polyurethane and polypropylene lamination printing inks. 收起 | |
| GH-PU-2 | SICHUAN GUOHE NEW MATERIALS CO., LTD. | GH-PU-2, in the form of a clear sticky solution, is an environment-friendly polyurethane resin that does not contain benzene, toluene, and ketone. It has good print-ability and high compatibility, with high overprint of compatibility with the chlorinated ...展开 GH-PU-2, in the form of a clear sticky solution, is an environment-friendly polyurethane resin that does not contain benzene, toluene, and ketone. It has good print-ability and high compatibility, with high overprint of compatibility with the chlorinated polyurethane and polypropylene lamination printing inks. 收起 | |
| GH-PU-3 | SICHUAN GUOHE NEW MATERIALS CO., LTD. | GH-PU-3, in the form of a clear sticky solution, is an environment-friendly polyurethane resin that does not contain benzene, toluene, and ketone. It has good print-ability and high compatibility, with high overprint of compatibility with the chlorinated ...展开 GH-PU-3, in the form of a clear sticky solution, is an environment-friendly polyurethane resin that does not contain benzene, toluene, and ketone. It has good print-ability and high compatibility, with high overprint of compatibility with the chlorinated polyurethane and polypropylene lamination printing inks. 收起 | |
| GH-TCJ-1 | SICHUAN GUOHE NEW MATERIALS CO., LTD. | GH-TCJ-1, in the form of a colorless clear sticky solution, is a hydroxyl acrylic ester copolymerization modified resin with a viscosity of 600 to 1200 mPas. It is ideal to substitute for non-environmental protection coatings pipeline, equipment, and cont...展开 GH-TCJ-1, in the form of a colorless clear sticky solution, is a hydroxyl acrylic ester copolymerization modified resin with a viscosity of 600 to 1200 mPas. It is ideal to substitute for non-environmental protection coatings pipeline, equipment, and containers. 收起 | |
| GH-TCJ-2 | SICHUAN GUOHE NEW MATERIALS CO., LTD. | GH-TCJ-2, in the form of a colorless clear sticky solution, is a hydroxyl acrylic ester copolymerization modified resin with a viscosity of 400 to 1000 mPas. It is ideal to substitute for non-environmental protection coatings pipeline, equipment, and cont...展开 GH-TCJ-2, in the form of a colorless clear sticky solution, is a hydroxyl acrylic ester copolymerization modified resin with a viscosity of 400 to 1000 mPas. It is ideal to substitute for non-environmental protection coatings pipeline, equipment, and containers. 收起 | |
| GH-WPU | SICHUAN GUOHE NEW MATERIALS CO., LTD. | GH-WPU, in the form of a white emulsion, is a green environmental protection type of waterborne polyurethane resin emulsion. It has a suitable solvent in water and alcohol and is suitable for printing glue and for preparation of clear and white printing g...展开 GH-WPU, in the form of a white emulsion, is a green environmental protection type of waterborne polyurethane resin emulsion. It has a suitable solvent in water and alcohol and is suitable for printing glue and for preparation of clear and white printing glue. 收起 | |
| HESS NCS-10 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-10 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-10 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-12 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-12 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-12 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-15 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-15 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-15 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-3 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-3 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-3 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-5 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-5 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-5 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-8 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-8 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-8 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| Isobutanol | Penpet Petrochemical Trading GmbH | Isobutanol, in the form of a colourless, oily liquid, is an industrial solvent that can be used in paints and coatings. When used in paint, it contributes to reduced viscosity and improves the brush flow of the end product. It also retards the formation...展开 Isobutanol, in the form of a colourless, oily liquid, is an industrial solvent that can be used in paints and coatings. When used in paint, it contributes to reduced viscosity and improves the brush flow of the end product. It also retards the formation of oil residue. Isobutanol can also be used as a solvent in paint and varnish removers. 收起 | |
| Isophorone | Penpet Petrochemical Trading GmbH | Isophorone, in the form of a clear fluid having a peppermint odour, is an industrial solvent in the coatings, inks, and adhesive industries. This product can be used in synthesis for the production of isophorone diamine, isophorone diisocyanate and 3,5-d...展开 Isophorone, in the form of a clear fluid having a peppermint odour, is an industrial solvent in the coatings, inks, and adhesive industries. This product can be used in synthesis for the production of isophorone diamine, isophorone diisocyanate and 3,5-dimethylphenol. 收起 | |
| Isophthalic Acid | Penpet Petrochemical Trading GmbH | Isophthalic acid, in the form of a colourless crystalline powder, is an organic compound that can be used in paints and coatings. This product is insoluble in cold water and is barely soluble in boiling water. This product has a molecular weight of 166....展开 Isophthalic acid, in the form of a colourless crystalline powder, is an organic compound that can be used in paints and coatings. This product is insoluble in cold water and is barely soluble in boiling water. This product has a molecular weight of 166.14 and its melting point starts between 345 and 348°C. 收起 | |
| Isopropanol | Penpet Petrochemical Trading GmbH | Isopropanol, in the form of a colourless, clear liquid, is a highly concentrated alcohol that can be used as a solvent for adhesives, paints, and inks. This product is often used as a substitute for ethanol. It is often a constituent of disinfectant sol...展开 Isopropanol, in the form of a colourless, clear liquid, is a highly concentrated alcohol that can be used as a solvent for adhesives, paints, and inks. This product is often used as a substitute for ethanol. It is often a constituent of disinfectant solutions because it can quickly and easily clean surfaces, and evaporates without leaving a residue. 收起 | |
| Maleic Anhydride, Briquets | Penpet Petrochemical Trading GmbH | Maleic Anhydride, Briquets, in the form of a colourless to white powder with an acrid odour, is a versatile intermediate that can be used in alkyd resins for paints and coatings. This product is soluble in water and has a melting point at 53°C. Its boil...展开 Maleic Anhydride, Briquets, in the form of a colourless to white powder with an acrid odour, is a versatile intermediate that can be used in alkyd resins for paints and coatings. This product is soluble in water and has a melting point at 53°C. Its boiling point is 202°C and auto-ignites at 477°C. This product is available in flakes, briquets, pastilles or in liquid form. 收起 | |
| Maleic Anhydride, Flakes | Penpet Petrochemical Trading GmbH | Maleic Anhydride, Flakes, in the form of a colourless to white powder with an acrid odour, is a versatile intermediate that can be used in alkyd resins for paints and coatings. This product is soluble in water and has a melting point at 53°C. Its boilin...展开 Maleic Anhydride, Flakes, in the form of a colourless to white powder with an acrid odour, is a versatile intermediate that can be used in alkyd resins for paints and coatings. This product is soluble in water and has a melting point at 53°C. Its boiling point is 202°C and auto-ignites at 477°C. This product is available in flakes, briquets, pastilles or in liquid form. 收起 | |
| Maleic Anhydride, Liquid | Penpet Petrochemical Trading GmbH | Maleic Anhydride, Liquid, in the form of a colourless liquid with an acrid odour, is a versatile intermediate that can be used in alkyd resins for paints and coatings. This product is soluble in water and has a melting point at 53°C. Its boiling point i...展开 Maleic Anhydride, Liquid, in the form of a colourless liquid with an acrid odour, is a versatile intermediate that can be used in alkyd resins for paints and coatings. This product is soluble in water and has a melting point at 53°C. Its boiling point is 202°C and auto-ignites at 477°C. This product is available in flakes, briquets, pastilles or in liquid form. 收起 | |
| Maleic Anhydride, Pastilles | Penpet Petrochemical Trading GmbH | Maleic Anhydride, Pastilles, in the form of a colourless to white powder with an acrid odour, is a versatile intermediate that can be used in alkyd resins for paints and coatings. This product is soluble in water and has a melting point at 53°C. Its boi...展开 Maleic Anhydride, Pastilles, in the form of a colourless to white powder with an acrid odour, is a versatile intermediate that can be used in alkyd resins for paints and coatings. This product is soluble in water and has a melting point at 53°C. Its boiling point is 202°C and auto-ignites at 477°C. This product is available in flakes, briquets, pastilles or in liquid form. 收起 | |
| Methylhexahydrophthalic Anhydride | Penpet Petrochemical Trading GmbH | Methylhexahydrophthalic Anhydride, in the form of a colorless liquid, is an aromatic compound that can be used as a raw material for adhesive resins. This product is produced by hydrogenation from Methyltetrahydrophthalic Anhydride (MTHPA). It is also k...展开 Methylhexahydrophthalic Anhydride, in the form of a colorless liquid, is an aromatic compound that can be used as a raw material for adhesive resins. This product is produced by hydrogenation from Methyltetrahydrophthalic Anhydride (MTHPA). It is also known as hexahydromethylphthalic anhydride. 收起 | |
| n-Butanol | Penpet Petrochemical Trading GmbH | N-Butanol, in the form of a colourless liquid with a characteristic odour reminiscent of banana, is a butyl alcohol that can be used in floor polishes and cleaners, and as a solvent in paints, varnishes, resins, and coatings. This product is a four-carbo...展开 N-Butanol, in the form of a colourless liquid with a characteristic odour reminiscent of banana, is a butyl alcohol that can be used in floor polishes and cleaners, and as a solvent in paints, varnishes, resins, and coatings. This product is a four-carbon linear hydrocarbon with a hydroxy group at position 1. It is miscible in common solvents but is only slightly soluble in water. 收起 | |
| Neopentyl Glycol (NPG), Flakes | Penpet Petrochemical Trading GmbH | Neopentyl Glycol (NPG), Flakes, in the form of a clear flake, is a polyalcohol that can be used in resins for powder coatings and glues. This product is normally used in the production of polyester resins. | |
| Neopentyl Glycol (NPG), Solution | Penpet Petrochemical Trading GmbH | Neopentyl Glycol (NPG), Solution, in the form of a 90% solution, is a polyalcohol that can be used in resins for powder coatings and glues. This product is normally used in the production of polyester resins. | |
| Pentaerythritol | Penpet Petrochemical Trading GmbH | Pentaerythritol, in the form of a white, crystalline, and odourless powder, is a component of resin esters that can be used in paints, coatings, printing inks, varnishes, floor coverings, and adhesives. This product has a molar mass of 136.15 and a densi...展开 Pentaerythritol, in the form of a white, crystalline, and odourless powder, is a component of resin esters that can be used in paints, coatings, printing inks, varnishes, floor coverings, and adhesives. This product has a molar mass of 136.15 and a density of 1.396 g/cm3. Its melting point is defined at 260.5°C and its boiling point is at 276°C. 收起 | |
| Phthalic Anhydride (PA) | Penpet Petrochemical Trading GmbH | Phthalic Anhydride (PA) in the form of a colourless flake, is an organic compound that can be used in surface coatings. This product is an important raw material that can often serve as a plasticizer in plastics, dyestuffs, and synthetic resins. | |
| Sodium Formate | Penpet Petrochemical Trading GmbH | Sodium Formate is the sodium salt of formic acid. This product appears as a colourless powder that can be used in printing processes. Its melting point is -94.7 degrees Celsius and it boils between 55.8 and 56.6 degrees C. | |
| Tetrahydrofurane (THF) | Penpet Petrochemical Trading GmbH | Tetrahydrofurane (THF), in the form of a colourless fluid with an ether-like odor, is an organic solvent that can be used in the production of enamels and adhesives. This product is normally an intermediate in the production of polyamide, polyester and p...展开 Tetrahydrofurane (THF), in the form of a colourless fluid with an ether-like odor, is an organic solvent that can be used in the production of enamels and adhesives. This product is normally an intermediate in the production of polyamide, polyester and polyurethane. 收起 | |
| Tetrahydrophthalic Anhydride (THPA) | Penpet Petrochemical Trading GmbH | Tetrahydrophthalic Anhydride (THPA), in the form of a white crystalline powder, is created from the reaction of butadiene with maleic anhydride. This product can be used in adhesives and as an intermediate for alkyd resins. | |
| Toluene-Diisocyanate (TDI) | Penpet Petrochemical Trading GmbH | Toluene-Diisocyanate (TDI) is a clear, colourless to yellowish liquid or solid, depending on the ambient temperature. This product is an aromatic diisocyanate that can be used in varnishes and adhesives. It is an important intermediate in the plastics i...展开 Toluene-Diisocyanate (TDI) is a clear, colourless to yellowish liquid or solid, depending on the ambient temperature. This product is an aromatic diisocyanate that can be used in varnishes and adhesives. It is an important intermediate in the plastics industry that is normally used in high-end lacquers and coatings. 收起 | |
| Trimellitic Anhydride (TMA) | Penpet Petrochemical Trading GmbH | Trimellitic Anhydride (TMA), in the form of a white crystalline flake, is a dicarboxylic acid produced from the oxidation of 1,2,4-Trimethylbenzene that can be used in the manufacture of wire enamels. This product is normally used for the production of P...展开 Trimellitic Anhydride (TMA), in the form of a white crystalline flake, is a dicarboxylic acid produced from the oxidation of 1,2,4-Trimethylbenzene that can be used in the manufacture of wire enamels. This product is normally used for the production of PVC plasticizers, polyester and polyamide resins, polyurethane resin, and as a curing agent for epoxies. 收起 | |
| Trimethylolpropane (TMP) | Penpet Petrochemical Trading GmbH | Trimethylolpropane (TMP), in the form of a clear crystalline flake, is an alcohol produced by the reaction of formaldehyde with n-butyraldehyde. This product is an intermediate and a triol that can be used in glues and polyurethane coatings. It is also ...展开 Trimethylolpropane (TMP), in the form of a clear crystalline flake, is an alcohol produced by the reaction of formaldehyde with n-butyraldehyde. This product is an intermediate and a triol that can be used in glues and polyurethane coatings. It is also known as hexaglycerol. 收起 | |
| Trimethylolpropane (TMP), Liquid | Penpet Petrochemical Trading GmbH | Trimethylolpropane (TMP), in the form of a clear colorless liquid, is an alcohol produced by the reaction of formaldehyde with n-butyraldehyde. This product is an intermediate and a triol that can be used in glues and polyurethane coatings. It is also k...展开 Trimethylolpropane (TMP), in the form of a clear colorless liquid, is an alcohol produced by the reaction of formaldehyde with n-butyraldehyde. This product is an intermediate and a triol that can be used in glues and polyurethane coatings. It is also known as hexaglycerol. 收起 | |
| Triphenylphosphite (TPP) | Penpet Petrochemical Trading GmbH | Triphenylphosphite (TPP), in the form of a colourless liquid or solid (depending on ambient temperature) is the ester of phosphorous acid and phenol. This product is normally an antioxidant, but it can be used in lubricant additives and adhesives. |
