| AEPD® VOX 1000 | ANGUS Chemical Company 安格斯化学公司 | 一个新的多官能团添加剂，用于低气味，零VOC户内水性油漆。它具有非常温和的气味，高沸点和低蒸汽压。这些特点使之成为需要符合EU directive 2004/42/EC法规的油漆生产商一个理想的配方工具 | |
| ALKATERGE®-T | ANGUS Chemical Company 安格斯化学公司 | ALKATERGE®-T is one of a series of oxazoline-type non-volatile surface active agents, and is only slightly soluble in water. It is an excellent aid for the dispersion of pigments (nonaqueous solvents base) and also indicated as a primary water in oil emu...展开 ALKATERGE®-T is one of a series of oxazoline-type non-volatile surface active agents, and is only slightly soluble in water. It is an excellent aid for the dispersion of pigments (nonaqueous solvents base) and also indicated as a primary water in oil emulsifier. At ordinary room temperature, ALKATERGE®-T is a waxy solid which is highly soluble in aromatic hydrocarbons and lower alcohols or ketones, moderately soluble in aliphatic hydrocarbons, and miscible with most vegetable oils. In its liquid state, ALKATERGE®-T is miscible with almost all organic liquids. ALKATERGE®-T is useful as a surface active agent which is indicated by the fact that 0.1% in mineral oil reduces the interfacial surface tension against water approximately 95%, or to less than 2 dynes/cm. 收起 | |
| AMP® | ANGUS Chemical Company 安格斯化学公司 | 这是一种无色，低粘度流体，大量用于金属加工流体，涂料，锅炉水体系和个人护理等领域。它可用作中和树脂的胺，协同分散剂，脱甲醛剂，腐蚀抑制剂以及作为合成的原料。 | |
| AMP-95® | ANGUS Chemical Company 安格斯化学公司 | 被普遍认为是一种用于所有类型的乳胶漆的多功能添加剂。 | |
| AVANTANE® PA 4000 | ANGUS Chemical Company 安格斯化学公司 | 一种专门设计用于满足溶剂型轮转凹印和柔印印刷性能要求的添加剂。 | |
| DMAMP-80® | ANGUS Chemical Company 安格斯化学公司 | DMAMP-80® (80% aqueous solution of 2-dimethylamino-2-methyl-1-propanol) is one of the strongest tertiary amines commercially available. Because it is a strong base, DMAMP-80™ can be used in water systems to provide formulations of exceptional clarity, wet...展开 DMAMP-80® (80% aqueous solution of 2-dimethylamino-2-methyl-1-propanol) is one of the strongest tertiary amines commercially available. Because it is a strong base, DMAMP-80™ can be used in water systems to provide formulations of exceptional clarity, wettability and stability. This product is recommended for use as an emulsifying agent, corrosion inhibitor, resin solubilizer, catalyst, additive, and synthesis agent. 收起 | |
| EcoFlame APP201 | Unibrom Corp. | EcoFlame APP201 is a white fine particle ammonium polyphosphate that is largely insoluble in water, completely insoluble in organic solvent, and is non-flammable and non-hygroscopic. It can be used in sealants and adhesives, polyurethane foam (PU rigid, f...展开 EcoFlame APP201 is a white fine particle ammonium polyphosphate that is largely insoluble in water, completely insoluble in organic solvent, and is non-flammable and non-hygroscopic. It can be used in sealants and adhesives, polyurethane foam (PU rigid, flexible, and rigid integral skin foam), intumescent coatings, cellulose-containing material, and in thermoplastics (PP): where it can be used in casting resin based on unsaturated PET resin and epoxy resin. EcoFlame APP201 has a molecular weight of n>1000, a pH value of 5.5 to 7.0, a density of 1.9 kg/L at 25°C, an apparent density of 0.7 kg/L, and an average particle size equal to or less than 15 um. 收起 | |
| EcoFlame APP202 | Unibrom Corp. | EcoFlame APP202 is a white fine particle ammonium polyphosphate that is largely insoluble in water, completely insoluble in organic solvent, and is non-flammable and non-hygroscopic. It can be used in sealants and adhesives, polyurethane foam (PU rigid, f...展开 EcoFlame APP202 is a white fine particle ammonium polyphosphate that is largely insoluble in water, completely insoluble in organic solvent, and is non-flammable and non-hygroscopic. It can be used in sealants and adhesives, polyurethane foam (PU rigid, flexible, and rigid integral skin foam), intumescent coatings, cellulose-containing material, and in thermoplastics (PP): where it can be used in casting resin based on unsaturated PET resin and epoxy resin. EcoFlame APP202 can also be used in favorably in intumescent coating for exterior applications where the ammonium polyphosphate is essential to have tremendously low water solubility, in cellulose-containing materials (car’s fireproof cloth, military cellulose materials, paper, and wood), and in numerous polymers for exterior applications. It has a molecular weight of n>1000, a pH value of 6.5 to 7.5, a density of 1.9 kg/L at 25°C, an apparent density of 0.7 kg/L, and an average particle size equal to or less than 15 um. 收起 | |
| EcoFlame APP203 | Unibrom Corp. | EcoFlame APP203 is a white fine particle ammonium polyphosphate that is largely insoluble in water, completely insoluble in organic solvent, and is non-flammable and non-hygroscopic. It can be used in sealants and adhesives, polyurethane foam (PU rigid, f...展开 EcoFlame APP203 is a white fine particle ammonium polyphosphate that is largely insoluble in water, completely insoluble in organic solvent, and is non-flammable and non-hygroscopic. It can be used in sealants and adhesives, polyurethane foam (PU rigid, flexible, and rigid integral skin foam), intumescent coatings, cellulose-containing material, and in thermoplastics (PP): where it can be used in casting resin based on unsaturated PET resin and epoxy resin. EcoFlame APP203 is also appropriate as acid donor for intumescent coatings and PU foams. It has a molecular weight of n>1000, a pH value of 7.5 to 8.5, a density of 1.9 kg/L at 25°C, an apparent density of 0.7 kg/L, and an average particle size equal to or less than 15 um. 收起 | |
| EcoFlame APP204 | Unibrom Corp. | EcoFlame APP204 is a white fine particle ammonium polyphosphate that is largely insoluble in water, completely insoluble in organic solvent, and is non-flammable and non-hygroscopic. It can be used in sealants and adhesives, polyurethane foam (PU rigid, f...展开 EcoFlame APP204 is a white fine particle ammonium polyphosphate that is largely insoluble in water, completely insoluble in organic solvent, and is non-flammable and non-hygroscopic. It can be used in sealants and adhesives, polyurethane foam (PU rigid, flexible, and rigid integral skin foam), intumescent coatings, cellulose-containing material, and in thermoplastics (PP): where it can be used in casting resin based on unsaturated PET resin and epoxy resin. EcoFlame APP204 can be also be favorably used in solvent radical intumescent coatings and in thermoplastics. It has a molecular weight of n>1000, a pH value of 6.5 to 7.5, a density of 1.9 kg/L at 25°C, an apparent density of 0.7 kg/L, and an average particle size equal to or less than 15 um. 收起 | |
| EcoFlame APP205 | Unibrom Corp. | EcoFlame APP205 is a white fine particle ammonium polyphosphate that is used in a range of polyethylene, polyolefin blends, thermoplastics, polypropylene, ethylene/vinyl acetate copolymers, coating compounds, hot melt adhesives, and is suitable for both i...展开 EcoFlame APP205 is a white fine particle ammonium polyphosphate that is used in a range of polyethylene, polyolefin blends, thermoplastics, polypropylene, ethylene/vinyl acetate copolymers, coating compounds, hot melt adhesives, and is suitable for both injection molding and extrusion applications. EcoFlame APP205 has a molecular weight of n>1000, a pH value of 6.0 to 8.5, a density of 1.8 kg/L at 25°C, an apparent density of 0.45 kg/L, and an average particle size equal to or less than 16 um. 收起 | |
| EcoFlame B-543 | Unibrom Corp. | EcoFlame B-543, a white powder with the chemical name of Tetrabromobisphenol A, is a brominated aromatic flame retardant used in thermoset and thermoplastic resin systems and generally used in the manufacture of flame retardant printed circuit boards, fou...展开 EcoFlame B-543, a white powder with the chemical name of Tetrabromobisphenol A, is a brominated aromatic flame retardant used in thermoset and thermoplastic resin systems and generally used in the manufacture of flame retardant printed circuit boards, found in most electrical appliances. It is also used as an intermediate, to make other flame retardants, and brominated carbon/carbonate oligomers (that use TBBA as a raw material) are used to flame retard thermoplastic resin systems such as certain grades of polycarbonate (PC) and polybutylene terephthalate (PBT). EcoFlame B-543 has a molecular weight of 543.7, a moisture percent of 0.2 max, a melting point of 179 min, and an organic bromide of 58 min. 收起 | |
| EcoFlame B-641 | Unibrom Corp. | EcoFlame B-641, a white powder/granular form with the chemical name of Hexabromocyclodeodecane, is an additive flame retardant used in a wide range of textiles, coatings, adhesives, and plastics. It has high aliphatic bromine content, resulting in minimum...展开 EcoFlame B-641, a white powder/granular form with the chemical name of Hexabromocyclodeodecane, is an additive flame retardant used in a wide range of textiles, coatings, adhesives, and plastics. It has high aliphatic bromine content, resulting in minimum effect on polymer physical properties and lower loading, and is also recommended for styrene based systems such as extruded and expanded polystyrene foams. EcoFlame B-641 has a molecular weight of 641.7, a bromine content of 74% min, a melting point of 180 min, particle size of 95% with 80 mesh passed, and a purity of 99% min. 收起 | |
| EcoFlame B-641TC | Unibrom Corp. | EcoFlame B-641TC, a white powder/granular form with the chemical name of Hexabromocyclodeodecane, is an additive flame retardant used in a wide range of textiles, coatings, adhesives, and plastics. It has high aliphatic bromine content, resulting in minim...展开 EcoFlame B-641TC, a white powder/granular form with the chemical name of Hexabromocyclodeodecane, is an additive flame retardant used in a wide range of textiles, coatings, adhesives, and plastics. It has high aliphatic bromine content, resulting in minimum effect on polymer physical properties and lower loading, and is tailor-made for coating and textile fields with disperse-ability and flow-ability. EcoFlame B-641TC has a varying particle size of 1-2, 3-5, and 7-13, it also has a molecular weight of 641.7, a bromine content of 74% min, a melting point of 180 min, and a purity of 99% min. 收起 | |
| EcoFlame B-680 | Unibrom Corp. | EcoFlame B-680, a white to off-white crystalline powder/granular form with the chemical name of 1,2 –bis (2,4,6-tribromophenoxy)ethane, is a flame retardant of ABS, elastomers, textiles, unsaturated polyesters, HIPS, Polycarbonate, adhesives, thermoplasti...展开 EcoFlame B-680, a white to off-white crystalline powder/granular form with the chemical name of 1,2 –bis (2,4,6-tribromophenoxy)ethane, is a flame retardant of ABS, elastomers, textiles, unsaturated polyesters, HIPS, Polycarbonate, adhesives, thermoplastic, and coatings. It is especially efficient for applications in which thermal stability at high processing temperatures is important. EcoFlame B-680 has a molecular weight of 688, a melting point of 220 min, and bromine of 70 min. 收起 | |
| EcoFlame B-959 | Unibrom Corp. | EcoFlame B-959, a white powder with the chemical name of decabromodiphenyl oxide, is a flame retardant additive that offers a solution to flame retardant formulations in a wide range of applications and with bromine content. It is used in wire & cable, bu...展开 EcoFlame B-959, a white powder with the chemical name of decabromodiphenyl oxide, is a flame retardant additive that offers a solution to flame retardant formulations in a wide range of applications and with bromine content. It is used in wire & cable, business machines and television cabinet formulations, elastomers, and is predominantly effective in styrenic, HIPS, polyester resins, polyamide, and polyolefins. EcoFlame B-959 is available with an average particle size of 3 um max or 6 um max, a melting point of 300 min (for the 3 um particle size) and 304.4 to 309.7 min (for the 6 um max particle size, iron content of 10 mg/kg max, an organic bromide of 82% min, a molecular weight of 959.2, and an aluminum content of 30 mg/kg max. 收起 | |
| Enamel Grade Titanium Dioxide HTD-E | Hoten Chemical International Group | Enamel Grade Titanium Dioxide HTD-E is a white powder made from a sulfuric acid process. This product has a strong opacity making a thin, smooth and acid resistant coating used in enamel and coloring material. | |
| FLEXITANE® CA 6000 | ANGUS Chemical Company 安格斯化学公司 | 一种经过改进的万能专业涂料助剂，是一种有效的溶液，能够满足涂料配方的要求，减少特殊助剂的用量。 | |
| HESS NCS-10 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-10 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-10 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-12 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-12 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-12 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-15 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-15 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-15 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-3 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-3 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-3 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-5 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-5 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-5 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-8 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-8 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-8 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HIFIFAST ORANGE HF2Y (Pigment Orange 64) | Anshan Hifichem Co., Ltd. 鞍山七彩化学股份有限公司 | HIFIFAST ORANGE HF2Y（颜料橙64）是明亮的黄色调有机橙色颜料。它是行业标准的高性能橙色。出色的色强度，热稳定性和耐光性使其适用于包括食品接触和玩具等几乎所有的聚合物和应用。 | |
| HIFIFAST ORANGE HF3R (Pigment Orange 36) | Anshan Hifichem Co., Ltd. 鞍山七彩化学股份有限公司 | HIFIFAST ORANGE HF3R (Pigment Orange 36) 是一种橙色颜料，在所有涂料系统中有良好全面的色牢性。它推荐用于OEM涂料，修补漆，水基汽车漆，装饰漆和多种类型的工业漆。 | |
| HIFIFAST RED HF2Y (Pigment Red 166) | Anshan Hifichem Co., Ltd. 鞍山七彩化学股份有限公司 | HIFIFAST RED HF2Y (Pigment Red 166)是一款黄色调红色颜料，在低浓度下也有良好的热稳定性。它具有出色的使用性能。 | |
| HIFIFAST RED HF4Y-C (Pigment Red 242) | Anshan Hifichem Co., Ltd. 鞍山七彩化学股份有限公司 | HIFIFAST RED HF4Y-C （Pigment Red 242）是一种有出色的色牢度的强烈猩红色颜料。它适合用于多种聚合物中的纤维，薄膜，注塑成膜和挤出加工应用。 | |
| HIFIFAST RED HF5B-W (Pigment Red 176) | Anshan Hifichem Co., Ltd. 鞍山七彩化学股份有限公司 | HIFIFAST RED HF5B-W（Pigment Red 176）是一种高透明度的蓝色调红色颜料，有良好的色牢度。它有出色的介电性质。这款产品适合用于电缆剪切及纺丝染色应用中。 | |
| HIFIFAST RED HFBY-L (Pigment Red 144) | Anshan Hifichem Co., Ltd. 鞍山七彩化学股份有限公司 | HIFIFAST RED HFBY-L (Pigment Red 144) 是一种多功能蓝色调红色颜料，有出色的色牢度和分散性。它推荐用于聚丙烯纤维，PVC汽车制造和电缆应用中。 | |
| HIFIFAST YELLOW HF3G (Pigment Yellow 154) | Anshan Hifichem Co., Ltd. 鞍山七彩化学股份有限公司 | HIFIFAST YELLOW HF3G（Pigment Yellow 154）是一种中等黄色调颜料，有出色的耐光性和耐候性。由于具有出色的耐受性，它十分适用于各种浓度范围，包括浓度低至非常淡的色彩，并很适合作为着色颜料。它具有很好的流动性，也可以在不影响光泽度的前提下用于高浓度颜料。 | |
| HIFIFAST YELLOW HF4G-LB (Pigment Yellow 151) | Anshan Hifichem Co., Ltd. 鞍山七彩化学股份有限公司 | HIFIFAST YELLOW HF4G-LB（Pigment Yellow 151）是一种绿色调黄色颜料，有出色的耐光性和耐候性，特别是深色调。它具有有机颜料中相对良好的不透明性。由于它在油漆中具有很好的流动性，它可以在高颜料浓度下使用，且不影响光泽度。应当注意的是对强碱的耐性并不令人满意。 | |
| HIFIFAST YELLOW HF4R-C (Pigment Yellow 139) | Anshan Hifichem Co., Ltd. 鞍山七彩化学股份有限公司 | HIFIFAST YELLOW HF4R-C （Pigment Yellow 139）是一种红色调黄色颜料，有出色的耐光性和耐候性，特别是在深色调中。作为有机颜料，它有出色的不透明性。它特别适用于为低铅油漆生产深色不透明无铅黄色。 | |
| HIFIFAST YELLOW HF5M-FB (Pigment Yellow 180) | Anshan Hifichem Co., Ltd. 鞍山七彩化学股份有限公司 | HIFIFAST YELLOW HF5M-FB (Pigment Yellow 180)是一种绿色调黄色颜料，有出色的色牢度。这款颜料已经成为高性能绿色调黄色的行业标准。它在多种聚合物中进行使用，还包括食品和玩具应用等 | |
| HTM-A Barium Sulphate Modified | Hoten Chemical International Group | HTM-A Barium Sulphate Modified is a function filler of nano-meterclass specifically created for electronic printing and writing ink. This product is noted for an efficient pigment dispersibility and to fully retain pigment grains around it, in turn creati...展开 HTM-A Barium Sulphate Modified is a function filler of nano-meterclass specifically created for electronic printing and writing ink. This product is noted for an efficient pigment dispersibility and to fully retain pigment grains around it, in turn creating a pure vivid color image. 收起 | |
| HTM-B Barium Sulphate Modified | Hoten Chemical International Group | HTM-B Barium Sulphate Modified is a function filler of nanometer-class developed for electronic printing and writing ink. This product is noted for an efficient pigment dispersibility and to fully retain pigment grains around it, in turn creating a pure v...展开 HTM-B Barium Sulphate Modified is a function filler of nanometer-class developed for electronic printing and writing ink. This product is noted for an efficient pigment dispersibility and to fully retain pigment grains around it, in turn creating a pure vivid color image. 收起 | |
| HTM-C Barium Sulphate Modified | Hoten Chemical International Group | HTM-C Barium Sulphate Modified is a function filler of nano-meterclass specifically created for electronic printing and writing ink. This product is noted for an efficient pigment dispersibility and to fully retain pigment grains around it, in turn creati...展开 HTM-C Barium Sulphate Modified is a function filler of nano-meterclass specifically created for electronic printing and writing ink. This product is noted for an efficient pigment dispersibility and to fully retain pigment grains around it, in turn creating a pure vivid color image. 收起 | |
| HTN-NO Barium Sulfate Natural | Hoten Chemical International Group | HTN-NO Barium Sulfate Natural is a natural function filler that can be used in paint and improve concentration of coatings. | |
| HTN-NP Barium Sulfate Natural | Hoten Chemical International Group | HTN-NP Barium Sulfate Natural is a natural filler than can be used to improve the concentration of coatings and reduce levels of resin and solvent in formulas for cost-cutting measures. | |
| HTN-NQ Barium Sulfate Natural | Hoten Chemical International Group | HTN-NQ Barium Sulfate Natural is a natural filler than can be used to improve the concentration of coatings and reduce levels of resin and solvent in formulas for cost-cutting measures. | |
| HTN-NR Barium Sulfate Natural | Hoten Chemical International Group | HTN-NR Barium Sulfate Natural is a natural filler than can be used to improve the concentration of coatings and reduce levels of resin and solvent in formulas for cost-cutting measures. | |
| HTN-NS Barium Sulfate Natural | Hoten Chemical International Group | HTN-NS Barium Sulfate Natural is a natural filler than can be used to improve the concentration of coatings and reduce levels of resin and solvent in formulas for cost-cutting measures. | |
| HTS-H Synthetic Barium Sulfate | Hoten Chemical International Group | HTS-H Synthetic Barium Sulfate is a chemically synthesized barium sulfate derived from the processing of barium salt and sodium sulfate. As a filler, it can be used to cut costs on resin, and has good light fastness, weathering resistance, and narrow dist...展开 HTS-H Synthetic Barium Sulfate is a chemically synthesized barium sulfate derived from the processing of barium salt and sodium sulfate. As a filler, it can be used to cut costs on resin, and has good light fastness, weathering resistance, and narrow distribution of grain sizes. This product is used in several coating applications. 收起 | |
| HTS-L Synthetic Barium Sulfate | Hoten Chemical International Group | HTS-L Synthetic Barium Sulfate is a chemically synthesized barium sulfate product derived from pure barium salt and sodium sulfate. As a filler, it can be used to cut costs on resin, and has good light fastness, weathering resistance, and narrow distribut...展开 HTS-L Synthetic Barium Sulfate is a chemically synthesized barium sulfate product derived from pure barium salt and sodium sulfate. As a filler, it can be used to cut costs on resin, and has good light fastness, weathering resistance, and narrow distribution of grain sizes. This product is used in several coating applications. 收起 | |
| HTS-M Synthetic Barium Sulfate | Hoten Chemical International Group | HTS-M Synthetic Barium Sulfate is a chemically synthesized barium sulfate product derived from pure barium salt and sodium sulfate. As a filler, it can be used to cut costs on resin, and has good light fastness, weathering resistance, and narrow distribut...展开 HTS-M Synthetic Barium Sulfate is a chemically synthesized barium sulfate product derived from pure barium salt and sodium sulfate. As a filler, it can be used to cut costs on resin, and has good light fastness, weathering resistance, and narrow distribution of grain sizes. This product is used in several coating applications. 收起 | |
| NIKANE® MS 3000 | ANGUS Chemical Company 安格斯化学公司 | 一种性能独特的多功能溶剂，用于构成多种工业保养涂料体系中的溶剂型还原剂和冲淡剂。 | |
| NIKANE® MS 5000 | ANGUS Chemical Company 安格斯化学公司 | 一种多功能溶剂，在溶剂型体系中有独特的性能。不但能够轻易地溶解各种材料，而且能够赋予溶解液以特性，因此得到了广泛的应用。 | |
| Pigment Orange 62 | Anshan Hifichem Co., Ltd. 鞍山七彩化学股份有限公司 | Pigment Orange 62 is a pigment with the C.I.# of 11775 and has a bright orange hue. It has applications in printing inks, coatings, and industrial coatings. | |
| Titanium Dioxide Anatase | Hoten Chemical International Group | Titanium Dioxide Anatase is a white powder derived from titanium concentrates and sulfuric acid. This anatase titanium dioxide pigment can provide whiteness, gloss, and high intensity in paints, coatings, and printing inks. | |
| Titanium Dioxide Rutile for Paint Industry HTD-R100 | Hoten Chemical International Group | Titanium Dioxide Rutile for Paint Industry HTD-R100 is a white powder derived from titanium concentrates and sulfuric acid. This rutile titanium dioxide pigment surface is treated by inorganic alumina and silicon to provide whiteness, gloss, high tinting ...展开 Titanium Dioxide Rutile for Paint Industry HTD-R100 is a white powder derived from titanium concentrates and sulfuric acid. This rutile titanium dioxide pigment surface is treated by inorganic alumina and silicon to provide whiteness, gloss, high tinting strength, durability and dispersion properties to coating, paint, and printing inks. 收起 | |
| Titanium Dioxide Rutile HTD-R100 | Hoten Chemical International Group | Titanium Dioxide Rutile HTD-R100 is a white powder derived from titanium concentrates and sulfuric acid. This rutile titanium dioxide pigment surface is treated by inorganic alumina and silicon to provide whiteness, gloss, high tinting strength, durabilit...展开 Titanium Dioxide Rutile HTD-R100 is a white powder derived from titanium concentrates and sulfuric acid. This rutile titanium dioxide pigment surface is treated by inorganic alumina and silicon to provide whiteness, gloss, high tinting strength, durability and dispersion properties to coating, paint, and printing ink. 收起 | |
| ZOLDINE® MS-PLUS | ANGUS Chemical Company 安格斯化学公司 | 快速反应、低黏度呃唑烷基湿气净化剂，用于聚氨酯涂料、密封剂和弹性体。 |
