| ATP-1S | Keeneyes International Co., Ltd. | ATP-1S is modified aluminum tripolyphosphate. It has excellent anti-corrosive benefits and high efficiency. It also offers good adhesive force, impact resilience, and wide adaptability. This product is recommended for solvent-based paints. | |
| ATP-1W | Keeneyes International Co., Ltd. | ATP-1W is modified aluminum tripolyphosphate. It has excellent anti-corrosive benefits and high efficiency. It also offers good adhesive force, impact resilience, and wide adaptability. This product is recommended for water-soluble paints. | |
| ATP-PSW | Keeneyes International Co., Ltd. | ATP-PSW is pure aluminum tripolyphosphate. It has excellent anti-corrosive benefits and high efficiency. It also offers good adhesive force, impact resilience, and wide adaptability. This product is recommended for fire retardant coatings, heat-resistant ...展开 ATP-PSW is pure aluminum tripolyphosphate. It has excellent anti-corrosive benefits and high efficiency. It also offers good adhesive force, impact resilience, and wide adaptability. This product is recommended for fire retardant coatings, heat-resistant coatings, and anti-corrosion coatings. 收起 | |
| ATP-TSW | Keeneyes International Co., Ltd. | ATP-TSW is modified aluminum tripolyphosphate. It has excellent anti-corrosive benefits and high efficiency. It also offers good adhesive force, impact resilience, and wide adaptability. This product is recommended for high grade solvent-based and water-s...展开 ATP-TSW is modified aluminum tripolyphosphate. It has excellent anti-corrosive benefits and high efficiency. It also offers good adhesive force, impact resilience, and wide adaptability. This product is recommended for high grade solvent-based and water-soluble paints. 收起 | |
| Benzidine Yellow GF1201 | Hangzhou Geecolor Chemical Co., Ltd | Benzidine Yellow GF1201 is a diarylide aniline yellow pigment that has high transparency and high tinting strength. The oil absorption of this pigment is 40-50 ml/100g and it has a pH value of 6.0-7.0. This product has a strong resistance to alkali and ac...展开 Benzidine Yellow GF1201 is a diarylide aniline yellow pigment that has high transparency and high tinting strength. The oil absorption of this pigment is 40-50 ml/100g and it has a pH value of 6.0-7.0. This product has a strong resistance to alkali and acid, and it is recommended to be used in offset inks. 收起 | |
| Benzidine Yellow GS1201 | Hangzhou Geecolor Chemical Co., Ltd | Benzidine Yellow GS1201 is a yellow pigment that has high color strength and good liquidity. This pigment has strong physical properties with a density of 1.5 g/cm3, an oil absorption between 40-50 ml/100g, and a pH value of 6.0-7.0. It is commonly used i...展开 Benzidine Yellow GS1201 is a yellow pigment that has high color strength and good liquidity. This pigment has strong physical properties with a density of 1.5 g/cm3, an oil absorption between 40-50 ml/100g, and a pH value of 6.0-7.0. It is commonly used in solvent-based inks. 收起 | |
| Benzidine Yellow GS1301 | Hangzhou Geecolor Chemical Co., Ltd | Benzidine Yellow GS1301 is a diarylide yellow pigment that has high transparency, high color strength and good liquidity. This pigment has a chemical base of disazo and is commonly used in solvent-based inks. | |
| Benzidine Yellow GS1401 | Hangzhou Geecolor Chemical Co., Ltd | Benzidine Yellow GS1401 is a yellow pigment that has high tinting strength with good liquidity. It has strong physical properties with an oil absorption rate between 35-45 ml/100g, a density of 1.6 g/cm3, and a pH value of 6.0-8.0. This pigment is semi-tr...展开 Benzidine Yellow GS1401 is a yellow pigment that has high tinting strength with good liquidity. It has strong physical properties with an oil absorption rate between 35-45 ml/100g, a density of 1.6 g/cm3, and a pH value of 6.0-8.0. This pigment is semi-transparent and is recommended to be used in solvent-based inks. 收起 | |
| Benzidine Yellow GS1402 | Hangzhou Geecolor Chemical Co., Ltd | Benzidine Yellow GS1402 is a yellow pigment that has high-transparency, high tinting strength, and great liquidity. This product is recommended for use in solvent-based inks as it has strong physical properties such as a pH Value of 6.0-8.0 and a density ...展开 Benzidine Yellow GS1402 is a yellow pigment that has high-transparency, high tinting strength, and great liquidity. This product is recommended for use in solvent-based inks as it has strong physical properties such as a pH Value of 6.0-8.0 and a density of 1.6 g/cm3. 收起 | |
| Benzidine Yellow GW1201 | Hangzhou Geecolor Chemical Co., Ltd | Benzidine Yellow GW1201 is a diarylide aniline yellow pigment that has a chemical nature of disazo. This product will provide high transparency and high tinting strength. It is recommended to be used in water-based inks and has strong physical properties ...展开 Benzidine Yellow GW1201 is a diarylide aniline yellow pigment that has a chemical nature of disazo. This product will provide high transparency and high tinting strength. It is recommended to be used in water-based inks and has strong physical properties with an oil absorption rate of 40-50 ml/100g and a pH value of 6.0-7.0. 收起 | |
| Benzidine Yellow GW1301 | Hangzhou Geecolor Chemical Co., Ltd | Benzidine Yellow GW1301 is a diarylide yellow pigment that provides high tenting strength and high transparency. This product has a chemical nature of disazo and is recommended to be used in water-based inks. It is highly resistant to acid, alkali and alc...展开 Benzidine Yellow GW1301 is a diarylide yellow pigment that provides high tenting strength and high transparency. This product has a chemical nature of disazo and is recommended to be used in water-based inks. It is highly resistant to acid, alkali and alcohol and also has strong physical properties with an oil absorption rate of 35-45 ml/100g and a pH value of 6.0-7.0. 收起 | |
| Benzidine Yellow GW1401 | Hangzhou Geecolor Chemical Co., Ltd | Benzidine Yellow GW1401 is a diarylide yellow pigment that provides high transparency and high tinting strength. This product has a chemical nature of disazo and is recommended to be used in water-based inks. It is highly resistant to alcohol, acid, and a...展开 Benzidine Yellow GW1401 is a diarylide yellow pigment that provides high transparency and high tinting strength. This product has a chemical nature of disazo and is recommended to be used in water-based inks. It is highly resistant to alcohol, acid, and also has strong physical properties with an oil absorption rate of 35-45 ml/100g and a pH value of 6.0-7.0. 收起 | |
| Benzidine Yellow GW7401 | Hangzhou Geecolor Chemical Co., Ltd | Benzidine Yellow GW7401 is a yellow pigment that is semi transparent, and is highly resistant to alcohol, acid, and benzene. This product is recommended to be used in water-based inks. It also has strong physical properties with an oil absorption rate of ...展开 Benzidine Yellow GW7401 is a yellow pigment that is semi transparent, and is highly resistant to alcohol, acid, and benzene. This product is recommended to be used in water-based inks. It also has strong physical properties with an oil absorption rate of 35-45 ml/100g and a pH value of 6.0-7.0. 收起 | |
| Benzimidazolone Yellow GC15101 | Hangzhou Geecolor Chemical Co., Ltd | Benzimidazolone Yellow GC15101 is a yellow pigment with a greenish shade that has high color strength and exceptional heat stability. This product has good resistance to warping and is recommended to be used in industrial paints, decorative paints and OEM...展开 Benzimidazolone Yellow GC15101 is a yellow pigment with a greenish shade that has high color strength and exceptional heat stability. This product has good resistance to warping and is recommended to be used in industrial paints, decorative paints and OEM paint. It has good physical properties with a density of 1.8 g/cm3 and an oil absorption rate of 30-40 ml/100g. 收起 | |
| Benzimidazolone Yellow GC15401 | Hangzhou Geecolor Chemical Co., Ltd | Benzimidazolone Yellow GC15401 is a yellow/greenish pigment that has excellent light and solvent fastness with good heat stability. It is recommended to be used in industrial paints, decorative paints, and powder coatings. This product provides other exce...展开 Benzimidazolone Yellow GC15401 is a yellow/greenish pigment that has excellent light and solvent fastness with good heat stability. It is recommended to be used in industrial paints, decorative paints, and powder coatings. This product provides other excellent fastness properties with a resistance to ester, alcohol, benzene, acid and alkali. 收起 | |
| Butyl glycolate (BG) | Keeneyes International Co., Ltd. | Butyl glycolate (BG) is a colorless liquid with a very faint, ester-like odor. The product is miscible with the common organic solvents but only partially miscible with water. With respect to the thermal stability of BG as a "2-hydroxy ester," reactions s...展开 Butyl glycolate (BG) is a colorless liquid with a very faint, ester-like odor. The product is miscible with the common organic solvents but only partially miscible with water. With respect to the thermal stability of BG as a "2-hydroxy ester," reactions such as glycolide formation, transesterification, saponification and etherification occur at elevated temperatures, especially at the boiling point, creating an upwards extension of the boiling point range. 收起 | |
| Cyanine Blue GF15301 | Hangzhou Geecolor Chemical Co., Ltd | Cyanine Blue GF15301 is a blue pigment that has a bright color and strong color strength. This pigment has low viscosity with good fluidity, and is recommended to be used in offset inks. | |
| Cyanine Blue GS15301 | Hangzhou Geecolor Chemical Co., Ltd | Cyanine Blue GS15301 is a blue pigment that has strong color strength and low viscosity. This product has exceptional fastness properties with a heat resistance to temperatures up to 250°C and good migration and bleeding resistance. It is commonly used in...展开 Cyanine Blue GS15301 is a blue pigment that has strong color strength and low viscosity. This product has exceptional fastness properties with a heat resistance to temperatures up to 250°C and good migration and bleeding resistance. It is commonly used in solvent-based inks. 收起 | |
| Cyanine Blue GW15101 | Hangzhou Geecolor Chemical Co., Ltd | Cyanine Blue GW15101 is a blue reddish pigment that has exceptional fastness properties with a resistance to acid, benzene, ketone, alkali, ester and alcohol. This product has great liquidity, and it is recommended to be used in water-based inks. It has s...展开 Cyanine Blue GW15101 is a blue reddish pigment that has exceptional fastness properties with a resistance to acid, benzene, ketone, alkali, ester and alcohol. This product has great liquidity, and it is recommended to be used in water-based inks. It has strong physical properties with a density of 1.5 g/cm3 and an oil absorption rate of 35-45 ml/100g. 收起 | |
| Cyanine Green GF701 | Hangzhou Geecolor Chemical Co., Ltd | Cyanine Green GF701 is a yellow or bluish shade pigment that has strong color strength with good fluidity. This pigment has excellent dispersability and a chemical nature of phthalocyanine. It is recommended to be used in offset inks and has a pH value of...展开 Cyanine Green GF701 is a yellow or bluish shade pigment that has strong color strength with good fluidity. This pigment has excellent dispersability and a chemical nature of phthalocyanine. It is recommended to be used in offset inks and has a pH value of 6.5-7.5 with an oil absorption rate of around 35-45 ml/100g. 收起 | |
| Cyanine Green GS701 | Hangzhou Geecolor Chemical Co., Ltd | Cyanine Green GS701 is a green pigment that has strong color strength and good dispersibility. It has exceptional fastness properties with a heat resistance to temperatures up to 220°C and good migration and bleeding resistance. This product also provides...展开 Cyanine Green GS701 is a green pigment that has strong color strength and good dispersibility. It has exceptional fastness properties with a heat resistance to temperatures up to 220°C and good migration and bleeding resistance. This product also provides good physical properties with a density of 1.8 g/cm3 and a pH Value of 6.5-7.5. It is commonly used in solvent-based inks. 收起 | |
| Cyanine Green GW701 | Hangzhou Geecolor Chemical Co., Ltd | Cyanine Green GW701 is a green reddish pigment that has exceptional fastness properties with a resistance to acid, benzene, ketone, alkali, ester and alcohol. This product has great dispersibility, high color strength, and it is recommended to be used in ...展开 Cyanine Green GW701 is a green reddish pigment that has exceptional fastness properties with a resistance to acid, benzene, ketone, alkali, ester and alcohol. This product has great dispersibility, high color strength, and it is recommended to be used in water-based inks. 收起 | |
| DETDA E-100 | Keeneyes International Co., Ltd. | DETDA E-100 (Diethyl Toluene Diamine) is supplied as a light yellow transparent liquid. It is a good chain extender of PU elastomer, especially for RIM and SPUA. It is also used as a curing agent of polyurethane and epoxy resin, as an antioxidant in epoxy...展开 DETDA E-100 (Diethyl Toluene Diamine) is supplied as a light yellow transparent liquid. It is a good chain extender of PU elastomer, especially for RIM and SPUA. It is also used as a curing agent of polyurethane and epoxy resin, as an antioxidant in epoxy resins, in industrial oils, and lubricants. In addition, it can be used as an organic synthesis intermediate. 收起 | |
| DMTDA E-300 | Keeneyes International Co., Ltd. | DMTDA E-300 (Dimethyl Thio-Toluene Diamine is supplied as a light yellow transparent liquid. It is a new-model polyurethane elastomer curing cross-linking agent. It has two kinds of isomers, a mixture of 2,4- and 2,6-DMTDA (proportion is about 77~80/17~20...展开 DMTDA E-300 (Dimethyl Thio-Toluene Diamine is supplied as a light yellow transparent liquid. It is a new-model polyurethane elastomer curing cross-linking agent. It has two kinds of isomers, a mixture of 2,4- and 2,6-DMTDA (proportion is about 77~80/17~20). Compared with common MOCA, it is lower-viscosity liquid at normal temperature, it has features such as low temperature operations and low dosage. 收起 | |
| DPP Red GC25401 | Hangzhou Geecolor Chemical Co., Ltd | DPP Red GC25401 is a high performance red pigment that has a chemical nature of pyrrole and has mild opacity. This product has outstanding fastness properties with a resistance to alcohol, acid, benzene, ketone, alkali, and has a heat resistance of up to ...展开 DPP Red GC25401 is a high performance red pigment that has a chemical nature of pyrrole and has mild opacity. This product has outstanding fastness properties with a resistance to alcohol, acid, benzene, ketone, alkali, and has a heat resistance of up to 250°C. It also has strong physical properties with a density of 1.5 g/cm3 and can be used in all paints and coatings. 收起 | |
| DPP Red GW25401 | Hangzhou Geecolor Chemical Co., Ltd | DPP Red GW25401 is a red, high performance pigment that has a medium opacity and is recommended for use in water-based inks. This pigment has outstanding fastness properties with exceptional resistance to ester, benzene, ketone, alcohol, alkali and acid. | |
| EcoFlame APP201 | Unibrom Corp. | EcoFlame APP201 is a white fine particle ammonium polyphosphate that is largely insoluble in water, completely insoluble in organic solvent, and is non-flammable and non-hygroscopic. It can be used in sealants and adhesives, polyurethane foam (PU rigid, f...展开 EcoFlame APP201 is a white fine particle ammonium polyphosphate that is largely insoluble in water, completely insoluble in organic solvent, and is non-flammable and non-hygroscopic. It can be used in sealants and adhesives, polyurethane foam (PU rigid, flexible, and rigid integral skin foam), intumescent coatings, cellulose-containing material, and in thermoplastics (PP): where it can be used in casting resin based on unsaturated PET resin and epoxy resin. EcoFlame APP201 has a molecular weight of n>1000, a pH value of 5.5 to 7.0, a density of 1.9 kg/L at 25°C, an apparent density of 0.7 kg/L, and an average particle size equal to or less than 15 um. 收起 | |
| EcoFlame APP202 | Unibrom Corp. | EcoFlame APP202 is a white fine particle ammonium polyphosphate that is largely insoluble in water, completely insoluble in organic solvent, and is non-flammable and non-hygroscopic. It can be used in sealants and adhesives, polyurethane foam (PU rigid, f...展开 EcoFlame APP202 is a white fine particle ammonium polyphosphate that is largely insoluble in water, completely insoluble in organic solvent, and is non-flammable and non-hygroscopic. It can be used in sealants and adhesives, polyurethane foam (PU rigid, flexible, and rigid integral skin foam), intumescent coatings, cellulose-containing material, and in thermoplastics (PP): where it can be used in casting resin based on unsaturated PET resin and epoxy resin. EcoFlame APP202 can also be used in favorably in intumescent coating for exterior applications where the ammonium polyphosphate is essential to have tremendously low water solubility, in cellulose-containing materials (car’s fireproof cloth, military cellulose materials, paper, and wood), and in numerous polymers for exterior applications. It has a molecular weight of n>1000, a pH value of 6.5 to 7.5, a density of 1.9 kg/L at 25°C, an apparent density of 0.7 kg/L, and an average particle size equal to or less than 15 um. 收起 | |
| EcoFlame APP203 | Unibrom Corp. | EcoFlame APP203 is a white fine particle ammonium polyphosphate that is largely insoluble in water, completely insoluble in organic solvent, and is non-flammable and non-hygroscopic. It can be used in sealants and adhesives, polyurethane foam (PU rigid, f...展开 EcoFlame APP203 is a white fine particle ammonium polyphosphate that is largely insoluble in water, completely insoluble in organic solvent, and is non-flammable and non-hygroscopic. It can be used in sealants and adhesives, polyurethane foam (PU rigid, flexible, and rigid integral skin foam), intumescent coatings, cellulose-containing material, and in thermoplastics (PP): where it can be used in casting resin based on unsaturated PET resin and epoxy resin. EcoFlame APP203 is also appropriate as acid donor for intumescent coatings and PU foams. It has a molecular weight of n>1000, a pH value of 7.5 to 8.5, a density of 1.9 kg/L at 25°C, an apparent density of 0.7 kg/L, and an average particle size equal to or less than 15 um. 收起 | |
| EcoFlame APP204 | Unibrom Corp. | EcoFlame APP204 is a white fine particle ammonium polyphosphate that is largely insoluble in water, completely insoluble in organic solvent, and is non-flammable and non-hygroscopic. It can be used in sealants and adhesives, polyurethane foam (PU rigid, f...展开 EcoFlame APP204 is a white fine particle ammonium polyphosphate that is largely insoluble in water, completely insoluble in organic solvent, and is non-flammable and non-hygroscopic. It can be used in sealants and adhesives, polyurethane foam (PU rigid, flexible, and rigid integral skin foam), intumescent coatings, cellulose-containing material, and in thermoplastics (PP): where it can be used in casting resin based on unsaturated PET resin and epoxy resin. EcoFlame APP204 can be also be favorably used in solvent radical intumescent coatings and in thermoplastics. It has a molecular weight of n>1000, a pH value of 6.5 to 7.5, a density of 1.9 kg/L at 25°C, an apparent density of 0.7 kg/L, and an average particle size equal to or less than 15 um. 收起 | |
| EcoFlame APP205 | Unibrom Corp. | EcoFlame APP205 is a white fine particle ammonium polyphosphate that is used in a range of polyethylene, polyolefin blends, thermoplastics, polypropylene, ethylene/vinyl acetate copolymers, coating compounds, hot melt adhesives, and is suitable for both i...展开 EcoFlame APP205 is a white fine particle ammonium polyphosphate that is used in a range of polyethylene, polyolefin blends, thermoplastics, polypropylene, ethylene/vinyl acetate copolymers, coating compounds, hot melt adhesives, and is suitable for both injection molding and extrusion applications. EcoFlame APP205 has a molecular weight of n>1000, a pH value of 6.0 to 8.5, a density of 1.8 kg/L at 25°C, an apparent density of 0.45 kg/L, and an average particle size equal to or less than 16 um. 收起 | |
| EcoFlame B-543 | Unibrom Corp. | EcoFlame B-543, a white powder with the chemical name of Tetrabromobisphenol A, is a brominated aromatic flame retardant used in thermoset and thermoplastic resin systems and generally used in the manufacture of flame retardant printed circuit boards, fou...展开 EcoFlame B-543, a white powder with the chemical name of Tetrabromobisphenol A, is a brominated aromatic flame retardant used in thermoset and thermoplastic resin systems and generally used in the manufacture of flame retardant printed circuit boards, found in most electrical appliances. It is also used as an intermediate, to make other flame retardants, and brominated carbon/carbonate oligomers (that use TBBA as a raw material) are used to flame retard thermoplastic resin systems such as certain grades of polycarbonate (PC) and polybutylene terephthalate (PBT). EcoFlame B-543 has a molecular weight of 543.7, a moisture percent of 0.2 max, a melting point of 179 min, and an organic bromide of 58 min. 收起 | |
| EcoFlame B-641 | Unibrom Corp. | EcoFlame B-641, a white powder/granular form with the chemical name of Hexabromocyclodeodecane, is an additive flame retardant used in a wide range of textiles, coatings, adhesives, and plastics. It has high aliphatic bromine content, resulting in minimum...展开 EcoFlame B-641, a white powder/granular form with the chemical name of Hexabromocyclodeodecane, is an additive flame retardant used in a wide range of textiles, coatings, adhesives, and plastics. It has high aliphatic bromine content, resulting in minimum effect on polymer physical properties and lower loading, and is also recommended for styrene based systems such as extruded and expanded polystyrene foams. EcoFlame B-641 has a molecular weight of 641.7, a bromine content of 74% min, a melting point of 180 min, particle size of 95% with 80 mesh passed, and a purity of 99% min. 收起 | |
| EcoFlame B-641TC | Unibrom Corp. | EcoFlame B-641TC, a white powder/granular form with the chemical name of Hexabromocyclodeodecane, is an additive flame retardant used in a wide range of textiles, coatings, adhesives, and plastics. It has high aliphatic bromine content, resulting in minim...展开 EcoFlame B-641TC, a white powder/granular form with the chemical name of Hexabromocyclodeodecane, is an additive flame retardant used in a wide range of textiles, coatings, adhesives, and plastics. It has high aliphatic bromine content, resulting in minimum effect on polymer physical properties and lower loading, and is tailor-made for coating and textile fields with disperse-ability and flow-ability. EcoFlame B-641TC has a varying particle size of 1-2, 3-5, and 7-13, it also has a molecular weight of 641.7, a bromine content of 74% min, a melting point of 180 min, and a purity of 99% min. 收起 | |
| EcoFlame B-680 | Unibrom Corp. | EcoFlame B-680, a white to off-white crystalline powder/granular form with the chemical name of 1,2 –bis (2,4,6-tribromophenoxy)ethane, is a flame retardant of ABS, elastomers, textiles, unsaturated polyesters, HIPS, Polycarbonate, adhesives, thermoplasti...展开 EcoFlame B-680, a white to off-white crystalline powder/granular form with the chemical name of 1,2 –bis (2,4,6-tribromophenoxy)ethane, is a flame retardant of ABS, elastomers, textiles, unsaturated polyesters, HIPS, Polycarbonate, adhesives, thermoplastic, and coatings. It is especially efficient for applications in which thermal stability at high processing temperatures is important. EcoFlame B-680 has a molecular weight of 688, a melting point of 220 min, and bromine of 70 min. 收起 | |
| EcoFlame B-959 | Unibrom Corp. | EcoFlame B-959, a white powder with the chemical name of decabromodiphenyl oxide, is a flame retardant additive that offers a solution to flame retardant formulations in a wide range of applications and with bromine content. It is used in wire & cable, bu...展开 EcoFlame B-959, a white powder with the chemical name of decabromodiphenyl oxide, is a flame retardant additive that offers a solution to flame retardant formulations in a wide range of applications and with bromine content. It is used in wire & cable, business machines and television cabinet formulations, elastomers, and is predominantly effective in styrenic, HIPS, polyester resins, polyamide, and polyolefins. EcoFlame B-959 is available with an average particle size of 3 um max or 6 um max, a melting point of 300 min (for the 3 um particle size) and 304.4 to 309.7 min (for the 6 um max particle size, iron content of 10 mg/kg max, an organic bromide of 82% min, a molecular weight of 959.2, and an aluminum content of 30 mg/kg max. 收起 | |
| Enamel Grade Titanium Dioxide HTD-E | Hoten Chemical International Group | Enamel Grade Titanium Dioxide HTD-E is a white powder made from a sulfuric acid process. This product has a strong opacity making a thin, smooth and acid resistant coating used in enamel and coloring material. | |
| EXOCOAT™ 143 | Axcentive Sarl | EXOCOAT® 143 by Axcentive is a solvent-based organometallic resin (60% solids in Butyl acetate). It is characterized by non-sticky, hydrophobic, and oleophobic properties. Provides strong adhesion to steel, aluminum, glass, and plastics like PMMA and ABS ...展开 EXOCOAT® 143 by Axcentive is a solvent-based organometallic resin (60% solids in Butyl acetate). It is characterized by non-sticky, hydrophobic, and oleophobic properties. Provides strong adhesion to steel, aluminum, glass, and plastics like PMMA and ABS as well as to old coating layers. It covalently bonds with the substrate resulting in a very durable finish. It can be used as a standalone resin or might be formulated with other raw materials like white and colored pigments, organic resins, fillers, and additives. The use of water-based raw materials should be avoided. Durability is a unique feature of EXOCOAT® 143. It can sustain mechanical abrasion, and chemical attack and is UV stable. When applied at a very low layer thickness of 0.5 to 2µm it provides the surface with a protective hard coating that shows durable easy-to-clean, dirt resistance, anti-graffiti, and strong water repellency properties. It is suitable for ambient or force-cured, high-performance industrial coatings such as protective, coil, marine, and automotive. EXOCOAT® 143-based paints may be brushed, rolled, or sprayed by HVLP or airless spray. 收起 | |
| EXOCOAT™ 151A | Axcentive Sarl | EXOCOAT® 151A by Axcentive is a photocatalytic nano-titanium oxide sol with a strong self-cleaning performance. The photocatalytic effect results in effective radical formation which breaks down organic matter like dirt and soil. Airborne particles like V...展开 EXOCOAT® 151A by Axcentive is a photocatalytic nano-titanium oxide sol with a strong self-cleaning performance. The photocatalytic effect results in effective radical formation which breaks down organic matter like dirt and soil. Airborne particles like VOCs, NOx, and biopollution are also eradicated by EXOCOAT® 151A. It can be used as a general air purifier. Though most effective in outdoor light conditions, it is adapted for use under visible light as found in the interior. In all cases, it should be used as a topcoat to ensure its full effect. Glass and walls coated with EXOCOAT® 151A are super hydrophilic enhancing water-sheeting, also called the wash-off effect. It may be used on other flat surfaces such as plastics or coated substrates yet only interior. It dries under room temperature conditions. Spray application is recommended to reach thin monolayers which prove to be more effective. It is listed with EINECS. TSCA, AICS, and CEPA. 收起 | |
| EXOCOAT™ 151B | Axcentive Sarl | EXOCOAT® 151B by Axcentive is a photocatalytic nano-titanium oxide sol with a strong self-cleaning performance. The photocatalytic effect results in effective radical formation which breaks down organic matter like dirt and soil. Airborne particles like V...展开 EXOCOAT® 151B by Axcentive is a photocatalytic nano-titanium oxide sol with a strong self-cleaning performance. The photocatalytic effect results in effective radical formation which breaks down organic matter like dirt and soil. Airborne particles like VOCs, NOx, and biopollution are also eradicated by EXOCOAT® 151B. In all cases, it should be used as a topcoat to ensure its full effect. EXOCOAT® 151B coated walls are super hydrophilic enhancing water-sheeting, also called the wash-off effect. It is targeted for porous substrates like concrete, brickwork, and gypsum. It is not meant for glass substrates. It dries under room temperature conditions. Brush, roller, or Spray application is recommended to reach homogeneous coatings. It is listed with EINECS. TSCA, AICS, and CEPA. 收起 | |
| EXOCOAT™ 161 | Axcentive Sarl | EXOCOAT® 161 by Axcentive is a multipurpose, high-performance coating resin. It is preceramic, as it cures the ceramic layer. Upon curing, it converts to an inorganic highly cross linked layer with excellent barrier properties, high durability, and extre...展开 EXOCOAT® 161 by Axcentive is a multipurpose, high-performance coating resin. It is preceramic, as it cures the ceramic layer. Upon curing, it converts to an inorganic highly cross linked layer with excellent barrier properties, high durability, and extreme hardness (9H). Offers chemical-, scratch-, oxidation resistance, and temperature resistance over 1000°C for prolonged time. It can function as stand-alone resin at a layer thickness of 0.5 to 2 µm to form a durable finish that can be easy to clean. It bonds to substrates such as steel, aluminum, glass, and old coating layers. It can be used as conversion coating replacing Cr(VI). It may be co-formulated with the most frequently used coating ingredients from the group of pigments, fillers, resins, additives, and (co-)solvents and creates colored, super hard, or matte surfaces. EXOCOAT® 161 is highly advised to be used in aprotic solvents. It has a shelf life of 6 months. 收起 | |
| EXOCOAT™ AC | Axcentive Sarl | EXOCOAT® AC by Axcentive is a hybrid sol-gel resin for anti-corrosive conversion coatings in 60% ethanol. It is covalently bonded to the surface and applied directly to metal (iron alloy, galvanized steel, phosphate steel, stainless steel, and aluminum). ...展开 EXOCOAT® AC by Axcentive is a hybrid sol-gel resin for anti-corrosive conversion coatings in 60% ethanol. It is covalently bonded to the surface and applied directly to metal (iron alloy, galvanized steel, phosphate steel, stainless steel, and aluminum). It functions as a replacement for the Cr3+ and Cr6+ based system as used in metal plating and automotive industries. It converts the metal hydroxide surface into a stable, inert covalently bound monolayer. It can also be used as micrometer-thin primers under conventional organic coatings. It can be overcoated by epoxy primer or polyurethane topcoat systems. EXOCOAT® AC is suitable for conventional low & high pressure airless and air-mixing spraying, dipping, rolling, and brushing. It has a shelf life of 12 months. 收起 | |
| EXOCOAT™ ACX-W | Axcentive Sarl | EXOCOAT® ACX-W by Axcentive is a water-dilutable nanoparticle-modified anticorrosive conversion coating that covalently bonds to the surface through nanoparticles. It is applied directly to metals (iron alloy, galvanized steel, phosphate steel, stainless ...展开 EXOCOAT® ACX-W by Axcentive is a water-dilutable nanoparticle-modified anticorrosive conversion coating that covalently bonds to the surface through nanoparticles. It is applied directly to metals (iron alloy, galvanized steel, phosphate steel, stainless steel, and aluminum). It converts the metal hydroxide surface into a stable, inert covalently bound monolayer. It is used as a replacement for chromium-based primers on aluminum and other metals. It can be used as a conversion primer for a coating system based on an epoxy coating and polyurethane topcoat. It may omit toxic chemicals and functions as a replacement for Cr3+ and Cr6+-based systems used in metal plating and aerospace industries. EXOCOAT® ACX-W is applied with conventional low-pressure and high-pressure airless and air-mix spraying, dipping, rolling and brushing. It has a shelf life of 12 months. 收起 | |
| EXOCOAT™ AM | Axcentive Sarl | EXOCOAT® AM by Axcentive is a water-based, doped nano-titanium oxide sol with a strong antimicrobial effect and anatase structure. It prevents the build-up of microbes as the photocatalytic effect results in effective radical formation which breaks down v...展开 EXOCOAT® AM by Axcentive is a water-based, doped nano-titanium oxide sol with a strong antimicrobial effect and anatase structure. It prevents the build-up of microbes as the photocatalytic effect results in effective radical formation which breaks down viruses and bacteria. It eradicates viruses such as influenza, SARS-COV-2, dengue & hepatitis and bacteria such as E. coli, MSRA, streptococcus, listeria, pneumonia, and salmonella. It is activated by light and displays quick drying at room temperature. Spray application is recommended to reach thin monolayers. It exhibits curing at room temperature up to 300°C and super hard particles (1GPa Vickers). It is easy to apply & durable, allowing longer disinfection intervals while preserving hygiene level. It shows non-silver leaching, efficacious even under low light conditions, lower service frequency, and no need for frequent disinfection routine. It is used in the state-of-the-art continuous antimicrobial coating for high-traffic areas. EXOCOAT® AM is suitable for topcoats for any surface inside buildings, stores, hospitals, and vehicles. The shelf life of this product is 9 months. 收起 | |
| EXOCOAT™ Clearview | Axcentive Sarl | EXOCOAT® Clearview by Axcentive is a 1K hybrid sol-gel system in ethanol. It has been designed for water-repellent, easy-to-clean coatings for glass and ceramic substrates. A substrate coated with EXOCOAT® Clearview will turn into a hard, water-repellent ...展开 EXOCOAT® Clearview by Axcentive is a 1K hybrid sol-gel system in ethanol. It has been designed for water-repellent, easy-to-clean coatings for glass and ceramic substrates. A substrate coated with EXOCOAT® Clearview will turn into a hard, water-repellent durable easy-to-clean surface. EXOCOAT® Clearview keeps windscreens clean from raindrops and improves vision drastically, especially in difficult wet road conditions, which can be experienced day and night. Besides, it can be used to make easy-to-clean, water shedding tiles and chrome for example used in kitchens and bathrooms. 收起 | |
| EXOCOAT™ Clearview-2 | Axcentive Sarl | EXOCOAT® Clearview-2 by Axcentive is a 2K hybrid sol-gel in ethanol. It is designed for durable water repellent, easy-to-clean, dirt resistant glass coatings. This solvent-based nanosystem can be applied in coatings for automotive windscreens, or glass ba...展开 EXOCOAT® Clearview-2 by Axcentive is a 2K hybrid sol-gel in ethanol. It is designed for durable water repellent, easy-to-clean, dirt resistant glass coatings. This solvent-based nanosystem can be applied in coatings for automotive windscreens, or glass bathroom doors. It can be applied as such or diluted, in coatings as a monolayer to obtain a very hard and durable hydrophobic surface. EXOCOAT® Clearview-2 keeps windows clean from raindrops and improves vision drastically, especially in difficult wet road conditions, which can be experienced day and night. In bathroom glass, it makes the water run down fast and avoids water spots. 收起 | |
| EXOCOAT™ SH | Axcentive Sarl | EXOCOAT® SH by Axcentive is an inorganic 1K superhydrophobic Sol-Gel system for breathable concrete and masonry sealers. It has extremely high water exclusion properties which helps to produce superhydrophobic coatings. It can be applied on concrete, pave...展开 EXOCOAT® SH by Axcentive is an inorganic 1K superhydrophobic Sol-Gel system for breathable concrete and masonry sealers. It has extremely high water exclusion properties which helps to produce superhydrophobic coatings. It can be applied on concrete, pavement, walls, and stucco to get the so-called Lotus Effect. The sol-gel system deposits superhydrophobic particles on the porous substrate. EXOCOAT® SH will not form a film and as a result, the wall stays breathable. With the contact angle of 145o water droplets bounce back from the surface and will roll down immediately upon touch. Thus, the wall remains dry, and clean and will behave as an efficient barrier against water. 收起 | |
| Fast Orange GW1301 | Hangzhou Geecolor Chemical Co., Ltd | Fast Orange GW1301 is an orange pigment that has a reddish shade and is semi-transparent. This pigment has a chemical nature of disazo and has good fastness to light and water. It is recommended for use in water-based inks and it has an oil absorption rat...展开 Fast Orange GW1301 is an orange pigment that has a reddish shade and is semi-transparent. This pigment has a chemical nature of disazo and has good fastness to light and water. It is recommended for use in water-based inks and it has an oil absorption rate of 30-40 ml/100g and a pH Value of 6.5-7.5. 收起 | |
| Fast Violet GS2301 | Hangzhou Geecolor Chemical Co., Ltd | Fast Violet GS2301 is a violet bluish pigment that is designed to be used in solvent-based inks. This product has high color strength and provides outstanding fastness properties with resistance to bleeding, migration, alcohol, benzene, ketone and heat re...展开 Fast Violet GS2301 is a violet bluish pigment that is designed to be used in solvent-based inks. This product has high color strength and provides outstanding fastness properties with resistance to bleeding, migration, alcohol, benzene, ketone and heat resistance against temperatures up to 250°C. It also has strong physical properties with a density of 1.5 g/cm3 and an oil absorption rate of 40-50 ml/100g. 收起 | |
| Fast Violet GS2302 | Hangzhou Geecolor Chemical Co., Ltd | Fast Violet GS2302 is a high performance yellowish violet pigment that is designed to be used in solvent-based inks. It has high color strength and provides outstanding fastness properties with a resistance to bleeding, migration, alcohol, benzene, ketone...展开 Fast Violet GS2302 is a high performance yellowish violet pigment that is designed to be used in solvent-based inks. It has high color strength and provides outstanding fastness properties with a resistance to bleeding, migration, alcohol, benzene, ketone and a heat resistance against temperatures up to 250°C. It also has strong physical properties with a density of 1.5 g/cm3 and an oil absorption rate of 40-50 ml/100g. 收起 | |
| Fast Violet GW2301 | Hangzhou Geecolor Chemical Co., Ltd | Fast Violet GW2301 is a high performance bluish violet pigment that has high color strength and it is recommended to be used in water-based inks. This pigment has excellent fastness properties with a heat resistance to temperatures up to 250°C. It also ha...展开 Fast Violet GW2301 is a high performance bluish violet pigment that has high color strength and it is recommended to be used in water-based inks. This pigment has excellent fastness properties with a heat resistance to temperatures up to 250°C. It also has strong physical properties with a density of 1.5 g/cm3 and a pH Value of 6.0-7.0. 收起 | |
| Fast Violet GW2302 | Hangzhou Geecolor Chemical Co., Ltd | Fast Violet GW2302 is a high performance reddish violet pigment that has high color strength and it is recommended to be used in water-based inks. It has strong physical properties with a density of 1.5 g/cm3 and a pH value of 6.0-7.0. This pigment also h...展开 Fast Violet GW2302 is a high performance reddish violet pigment that has high color strength and it is recommended to be used in water-based inks. It has strong physical properties with a density of 1.5 g/cm3 and a pH value of 6.0-7.0. This pigment also has excellent fastness properties with a heat resistance to temperatures up to 250°C. 收起 | |
| Fast Yellow GC101 | Hangzhou Geecolor Chemical Co., Ltd | Fast Yellow GC101 is an aryl amide yellow pigment that is weather resistant. This product is used in decorative and industrial paints, and it has exceptional fastness properties with a resistance to alcohol, acid and alkali. This pigment also has strong p...展开 Fast Yellow GC101 is an aryl amide yellow pigment that is weather resistant. This product is used in decorative and industrial paints, and it has exceptional fastness properties with a resistance to alcohol, acid and alkali. This pigment also has strong physical properties with an oil absorption rate of 25-35 ml/100g and a density of 1.6 g/cm3. 收起 | |
| Fast Yellow GC301 | Hangzhou Geecolor Chemical Co., Ltd | Fast Yellow GC301 is an azo yellow pigment with a shade of green. This product is used in water-based decorative and industrial paints, and has strong physical properties with a density of 1.6 g/cm3 and an oil absorption rate of 25-35 ml/100g. | |
| HESS NCS-10 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-10 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-10 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-12 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-12 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-12 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-15 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-15 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-15 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-3 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-3 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-3 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-5 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-5 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-5 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-8 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-8 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-8 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HTM-A Barium Sulphate Modified | Hoten Chemical International Group | HTM-A Barium Sulphate Modified is a function filler of nano-meterclass specifically created for electronic printing and writing ink. This product is noted for an efficient pigment dispersibility and to fully retain pigment grains around it, in turn creati...展开 HTM-A Barium Sulphate Modified is a function filler of nano-meterclass specifically created for electronic printing and writing ink. This product is noted for an efficient pigment dispersibility and to fully retain pigment grains around it, in turn creating a pure vivid color image. 收起 | |
| HTM-B Barium Sulphate Modified | Hoten Chemical International Group | HTM-B Barium Sulphate Modified is a function filler of nanometer-class developed for electronic printing and writing ink. This product is noted for an efficient pigment dispersibility and to fully retain pigment grains around it, in turn creating a pure v...展开 HTM-B Barium Sulphate Modified is a function filler of nanometer-class developed for electronic printing and writing ink. This product is noted for an efficient pigment dispersibility and to fully retain pigment grains around it, in turn creating a pure vivid color image. 收起 | |
| HTM-C Barium Sulphate Modified | Hoten Chemical International Group | HTM-C Barium Sulphate Modified is a function filler of nano-meterclass specifically created for electronic printing and writing ink. This product is noted for an efficient pigment dispersibility and to fully retain pigment grains around it, in turn creati...展开 HTM-C Barium Sulphate Modified is a function filler of nano-meterclass specifically created for electronic printing and writing ink. This product is noted for an efficient pigment dispersibility and to fully retain pigment grains around it, in turn creating a pure vivid color image. 收起 | |
| HTN-NO Barium Sulfate Natural | Hoten Chemical International Group | HTN-NO Barium Sulfate Natural is a natural function filler that can be used in paint and improve concentration of coatings. | |
| HTN-NP Barium Sulfate Natural | Hoten Chemical International Group | HTN-NP Barium Sulfate Natural is a natural filler than can be used to improve the concentration of coatings and reduce levels of resin and solvent in formulas for cost-cutting measures. | |
| HTN-NQ Barium Sulfate Natural | Hoten Chemical International Group | HTN-NQ Barium Sulfate Natural is a natural filler than can be used to improve the concentration of coatings and reduce levels of resin and solvent in formulas for cost-cutting measures. | |
| HTN-NR Barium Sulfate Natural | Hoten Chemical International Group | HTN-NR Barium Sulfate Natural is a natural filler than can be used to improve the concentration of coatings and reduce levels of resin and solvent in formulas for cost-cutting measures. | |
| HTN-NS Barium Sulfate Natural | Hoten Chemical International Group | HTN-NS Barium Sulfate Natural is a natural filler than can be used to improve the concentration of coatings and reduce levels of resin and solvent in formulas for cost-cutting measures. | |
| HTS-H Synthetic Barium Sulfate | Hoten Chemical International Group | HTS-H Synthetic Barium Sulfate is a chemically synthesized barium sulfate derived from the processing of barium salt and sodium sulfate. As a filler, it can be used to cut costs on resin, and has good light fastness, weathering resistance, and narrow dist...展开 HTS-H Synthetic Barium Sulfate is a chemically synthesized barium sulfate derived from the processing of barium salt and sodium sulfate. As a filler, it can be used to cut costs on resin, and has good light fastness, weathering resistance, and narrow distribution of grain sizes. This product is used in several coating applications. 收起 | |
| HTS-L Synthetic Barium Sulfate | Hoten Chemical International Group | HTS-L Synthetic Barium Sulfate is a chemically synthesized barium sulfate product derived from pure barium salt and sodium sulfate. As a filler, it can be used to cut costs on resin, and has good light fastness, weathering resistance, and narrow distribut...展开 HTS-L Synthetic Barium Sulfate is a chemically synthesized barium sulfate product derived from pure barium salt and sodium sulfate. As a filler, it can be used to cut costs on resin, and has good light fastness, weathering resistance, and narrow distribution of grain sizes. This product is used in several coating applications. 收起 | |
| HTS-M Synthetic Barium Sulfate | Hoten Chemical International Group | HTS-M Synthetic Barium Sulfate is a chemically synthesized barium sulfate product derived from pure barium salt and sodium sulfate. As a filler, it can be used to cut costs on resin, and has good light fastness, weathering resistance, and narrow distribut...展开 HTS-M Synthetic Barium Sulfate is a chemically synthesized barium sulfate product derived from pure barium salt and sodium sulfate. As a filler, it can be used to cut costs on resin, and has good light fastness, weathering resistance, and narrow distribution of grain sizes. This product is used in several coating applications. 收起 | |
| KA-101 | Keeneyes International Co., Ltd. | KA-101 is a decolored aldehyde resin with a high softening point that can be applied in a wide range of coatings. It has excellent anti-yellowing effects and is able to improve glossiness and hardness. This product is especially suitable for the preparati...展开 KA-101 is a decolored aldehyde resin with a high softening point that can be applied in a wide range of coatings. It has excellent anti-yellowing effects and is able to improve glossiness and hardness. This product is especially suitable for the preparation of universal color pastes. 收起 | |
| KA-105 | Keeneyes International Co., Ltd. | KA-105 is a polyketone resin. It is a light color, transparent, nontoxic, non-saponified hardened resin. This product can considerably increase the glossiness, adhesive force, fullness, and aging resistance of the products. | |
| KA-120 | Keeneyes International Co., Ltd. | KA-120 is a polyketone resin. It is a light color, transparent, nontoxic, non-saponified hardened resin. This product can considerably increase the glossiness, adhesive force, fullness, and aging resistance of the products. | |
| KA-552 | Keeneyes International Co., Ltd. | KA-552, a tetra-functional group containing β-hydroxyalkylamide crosslinker, is suitable for the production of outdoor polyester powder coatings. As a substitute of TGIC, it can cure with carboxyl-terminated polyester or acrylic resin to provide TGIC-free...展开 KA-552, a tetra-functional group containing β-hydroxyalkylamide crosslinker, is suitable for the production of outdoor polyester powder coatings. As a substitute of TGIC, it can cure with carboxyl-terminated polyester or acrylic resin to provide TGIC-free based exterior durable powder coatings. Its characteristics include low toxicity, non-irritating to skin, and good weather durability. 收起 | |
| KA-6088 | Keeneyes International Co., Ltd. | KA-6088 is a powder flowing agent which takes silicon dioxide as the carrier and adsorbs the same brand liquid flowing gloss agent BLP-402. It can improve flow and gloss characteristics, eliminate shrinking holes and pear eyes, and reduce orange-skin and ...展开 KA-6088 is a powder flowing agent which takes silicon dioxide as the carrier and adsorbs the same brand liquid flowing gloss agent BLP-402. It can improve flow and gloss characteristics, eliminate shrinking holes and pear eyes, and reduce orange-skin and pinholes. 收起 | |
| KA-68 | Keeneyes International Co., Ltd. | KA-68, also known as Hardener MB68, is a low-gloss curing agent composed of a salt of organic polycaroxilic acid with a cyclic amine. It is recommended for epoxy resins and epoxy polyester hybrid powder coatings. This product is used to achieve coatings w...展开 KA-68, also known as Hardener MB68, is a low-gloss curing agent composed of a salt of organic polycaroxilic acid with a cyclic amine. It is recommended for epoxy resins and epoxy polyester hybrid powder coatings. This product is used to achieve coatings with matte surface having excellent mechanical quality and wonderful reappearance. 收起 | |
| KA-7101 | Keeneyes International Co., Ltd. | KA-7101is a matting powder mainly used for amine baking coating, PU and PE coating. It offers high matting efficiency, good transparency, and easy dispersibility. This product has no adverse effect on coating films. | |
| KA-7111 | Keeneyes International Co., Ltd. | KA-7111 is a special matting powder which is used in PU semi-gloss coatings for artificial leather. It has many beneficial properties, such as good transparency, good dispersibility, high matting effect, and good hand feel and smoothness. | |
| KA-7302 | Keeneyes International Co., Ltd. | KA-7302 is a matting powder for PU and PE coatings. It has high matting efficiency, good transparency, and is easily dispersible. This product has no adverse effect on coating films. | |
| KA-7502 | Keeneyes International Co., Ltd. | KA-7502 is a matting agent intended for sealants and plastics. It has an excellent matting/flatting effect, and can meet such special requirements like transparency and dispersibility. | |
| KA-7602 | Keeneyes International Co., Ltd. | KA-7602 is a matting powder for amine baking coatings, PU and PE coatings. It has high matting efficiency, good transparency, and is easily dispersible. This product has no adverse effect on coating films. | |
| KA-81 | Keeneyes International Co., Ltd. | KA-81 is a decolored aldehyde resin that can be applied in a wide range of coatings. It has excellent anti-yellowing effects and is able to improve glossiness and hardness. This product is especially suitable for the preparation of universal color pastes. | |
| KA-81F | Keeneyes International Co., Ltd. | KA-81F is a solvent-free decolored aldehyde resin that can be applied in a wide range of coatings. It has excellent anti-yellowing effects and is able to improve glossiness and hardness. This product is especially suitable for the preparation of universal...展开 KA-81F is a solvent-free decolored aldehyde resin that can be applied in a wide range of coatings. It has excellent anti-yellowing effects and is able to improve glossiness and hardness. This product is especially suitable for the preparation of universal color pastes. 收起 | |
| KA-81S | Keeneyes International Co., Ltd. | KA-81S is a high viscosity decolored aldehyde resin that can be applied in a wide range of coatings. It has excellent anti-yellowing effects and is able to improve glossiness and hardness. This product is especially suitable for the preparation of univers...展开 KA-81S is a high viscosity decolored aldehyde resin that can be applied in a wide range of coatings. It has excellent anti-yellowing effects and is able to improve glossiness and hardness. This product is especially suitable for the preparation of universal color pastes. 收起 | |
| KA-81U | Keeneyes International Co., Ltd. | KA-81U is a decolored aldehyde resin that can be applied in UV ink. It has excellent anti-yellowing effects and is able to improve glossiness and hardness. This product is especially suitable for the preparation of universal color pastes. | |
| KA-B | Keeneyes International Co., Ltd. | KA-B is a conductive mica powder, a composite material with mica grain as a base material coated with MOS. These grains arrange closely in insulation coating so as to form conducting paths for electrons. This product is recommended for solvent conductive ...展开 KA-B is a conductive mica powder, a composite material with mica grain as a base material coated with MOS. These grains arrange closely in insulation coating so as to form conducting paths for electrons. This product is recommended for solvent conductive floor coatings, ESD anti-corrosion coatings, decorative conductive coatings, and conductive powder coatings. 收起 | |
| KA-C | Keeneyes International Co., Ltd. | KA-C is a conductive mica powder, a composite material with mica grain as a base material coated with MOS. These grains arrange closely in insulation coating so as to form conducting paths for electrons. This product is recommended for solvent conductive ...展开 KA-C is a conductive mica powder, a composite material with mica grain as a base material coated with MOS. These grains arrange closely in insulation coating so as to form conducting paths for electrons. This product is recommended for solvent conductive floor coatings, ESD anti-corrosion coatings, decorative conductive coatings, and conductive powder coatings. 收起 | |
| KA-D4 | Keeneyes International Co., Ltd. | KA-D4 is a conductive mica powder, a composite material with mica grain as a base material coated with MOS. These grains arrange closely in insulation coating so as to form conducting paths for electrons. This product is recommended for solvent conductive...展开 KA-D4 is a conductive mica powder, a composite material with mica grain as a base material coated with MOS. These grains arrange closely in insulation coating so as to form conducting paths for electrons. This product is recommended for solvent conductive floor coatings, ESD anti-corrosion coatings, decorative conductive coatings, and conductive powder coatings. 收起 | |
| KA-D40 | Keeneyes International Co., Ltd. | KA-D40 is a conductive mica powder, a composite material with mica grain as a base material coated with MOS. These grains arrange closely in insulation coating so as to form conducting paths for electrons. This product is recommended for solvent conductiv...展开 KA-D40 is a conductive mica powder, a composite material with mica grain as a base material coated with MOS. These grains arrange closely in insulation coating so as to form conducting paths for electrons. This product is recommended for solvent conductive floor coatings, ESD anti-corrosion coatings, decorative conductive coatings, and conductive powder coatings. 收起 | |
| KA-P | Keeneyes International Co., Ltd. | KA-P is a conductive mica powder, a composite material with mica grain as a base material coated with MOS. These grains arrange closely in insulation coating so as to form conducting paths for electrons. This product is recommended for solvent-free conduc...展开 KA-P is a conductive mica powder, a composite material with mica grain as a base material coated with MOS. These grains arrange closely in insulation coating so as to form conducting paths for electrons. This product is recommended for solvent-free conductive floor coatings. 收起 | |
| KA-PE-27 | Keeneyes International Co., Ltd. | KA-PE-27 is a special designed polyurethane-modified epoxy resin. It is able to increase the toughness of epoxy resin without reducing the hardness. This product also improves the compatibility with other polymers. It can be applied into paint formula to ...展开 KA-PE-27 is a special designed polyurethane-modified epoxy resin. It is able to increase the toughness of epoxy resin without reducing the hardness. This product also improves the compatibility with other polymers. It can be applied into paint formula to enforce the property of coating film. With a proper catalyst, this product can improve the adhesion property between metal and plastic material. 收起 | |
| KA-T11 | Keeneyes International Co., Ltd. | KA-T11 is a conductive mica powder, a composite material with mica grain as a base material coated with MOS. These grains arrange closely in insulation coating so as to form conducting paths for electrons. This product is recommended for solvent-free cond...展开 KA-T11 is a conductive mica powder, a composite material with mica grain as a base material coated with MOS. These grains arrange closely in insulation coating so as to form conducting paths for electrons. This product is recommended for solvent-free conductive floor coatings and conductive adhesives. 收起 | |
| KA-W1 | Keeneyes International Co., Ltd. | KA-W1 is a conductive mica powder, a composite material with mica grain as a base material coated with MOS. These grains arrange closely in insulation coating so as to form conducting paths for electrons. This product is recommended for solvent-free condu...展开 KA-W1 is a conductive mica powder, a composite material with mica grain as a base material coated with MOS. These grains arrange closely in insulation coating so as to form conducting paths for electrons. This product is recommended for solvent-free conductive floor coatings. 收起 | |
| KA-W11 | Keeneyes International Co., Ltd. | KA-W11 is a conductive mica powder, a composite material with mica grain as a base material coated with MOS. These grains arrange closely in insulation coating so as to form conducting paths for electrons. This product is recommended for solvent-free cond...展开 KA-W11 is a conductive mica powder, a composite material with mica grain as a base material coated with MOS. These grains arrange closely in insulation coating so as to form conducting paths for electrons. This product is recommended for solvent-free conductive floor coatings and conductive adhesives. 收起 | |
| KAE-14 | Keeneyes International Co., Ltd. | KAE-14 is a newly-developed epoxy resin, based on the traditional epoxy resin E-12. With comparison to the traditional E-12, it has higher epoxy values and is particularly suitable to produce the polyester epoxy hybrid powder coatings in 70:30 and of high...展开 KAE-14 is a newly-developed epoxy resin, based on the traditional epoxy resin E-12. With comparison to the traditional E-12, it has higher epoxy values and is particularly suitable to produce the polyester epoxy hybrid powder coatings in 70:30 and of high peeling strength. 收起 | |
| KAFU-308 | Keeneyes International Co., Ltd. | KAFU-308 is a PTFE wax, highly fragmented with the unique use of advanced powder molding process combined with modern nanotechnology. Compared with traditional grinding mill products, it can help achieve anti-rub, abrasion resistance and slip characterist...展开 KAFU-308 is a PTFE wax, highly fragmented with the unique use of advanced powder molding process combined with modern nanotechnology. Compared with traditional grinding mill products, it can help achieve anti-rub, abrasion resistance and slip characteristics in inks and coatings applications. 收起 | |
| KAFU-508 | Keeneyes International Co., Ltd. | KAFU-508 is a PTFE wax, highly fragmented with the unique use of advanced powder molding process combined with modern nanotechnology. Compared with traditional grinding mill products, it can help achieve anti-rub, abrasion resistance and slip characterist...展开 KAFU-508 is a PTFE wax, highly fragmented with the unique use of advanced powder molding process combined with modern nanotechnology. Compared with traditional grinding mill products, it can help achieve anti-rub, abrasion resistance and slip characteristics in inks and coatings applications. 收起 | |
| KAPU IL-50 | Keeneyes International Co., Ltd. | KAPU IL-50is an aromatic polyisocyanate based on toluene diisocyanate and dissolved in butyl acetate. It is used in the formulation of fast drying two-component clear and pigmented polyurethane coatings for wood, metal, and paper substrates. | |
| KAPU L-75 | Keeneyes International Co., Ltd. | KAPU L-75is an aromatic polyisocyanate based on toluene diisocyanate. Form supplied is approximately 75% in ethyl acetate. Systems crosslingked with KAPU L-75 can be used as coatings for furniture, parquet flooring, metal, paper, plastics and mineral subs...展开 KAPU L-75is an aromatic polyisocyanate based on toluene diisocyanate. Form supplied is approximately 75% in ethyl acetate. Systems crosslingked with KAPU L-75 can be used as coatings for furniture, parquet flooring, metal, paper, plastics and mineral substrates. These can be used to bond many materials, such as wood, metal and plastic. 收起 |
