| 4A Molecular Sieve | BELIKE Chemical Co.,Ltd. | 4A Molecular Sieve is a dark grey powder. This product is most commonly used as a desiccant in lacquer and paint applications. | |
| Anti-foam Agent BLK-6618 | BELIKE Chemical Co.,Ltd. | Anti-foam Agent BLK-6618 is a coating additive that is in the form of a white liquid. This product is most commonly used as a defoamer in water-based printing paste, paper coatings, and adhesives. | |
| Crestacryl® 71-1030 | Scott Bader | Crestacryl® 71-1030 is an acrylic resin with excellent adhesion, vapour permeability and flexibilty. Used for high grade façade, wall and concrete paints and sealers. | |
| Crestacryl® 71-5060 | Scott Bader | Crestacryl® 71-5060 is a thermoplastic acrylic with excellent solvent release, elasticity and adhesion onto various metallic substrates. Also used for primers for metal and wood finishing. | |
| Crestacryl® 71-8026 | Scott Bader | Crestacryl® 71-8026 is used for high grade road marking paints with excellent solvent release. | |
| Crestacryl® 71-9044 | Scott Bader | Crestacryl® 71-9044 is used for high grade road marking paints with excellent solvent release. | |
| Crestacryl® 71-9076 | Scott Bader | Crestacryl® 71-9076 has very rapid solvent release and drive-over ability; resin has excellent hardness, very good elasticity and adhesion. It is a high grade road-marking paint. | |
| Crestacryl® 71-9078 | Scott Bader | Crestacryl® 71-9078 is a high quality thermoplastic acrylic resin, which gives rapid solvent release, very good elasticity, excellent adhesion on various metallic substrates and very good alkali and water resistance. It can be used as universal binder for...展开 Crestacryl® 71-9078 is a high quality thermoplastic acrylic resin, which gives rapid solvent release, very good elasticity, excellent adhesion on various metallic substrates and very good alkali and water resistance. It can be used as universal binder for metal paints, wood coatings, road marking paints, masonry paints and concrete. 收起 | |
| Crestakyd® 10-0504 | Scott Bader | Crestakyd® 10-0504 is a 100% solids alkyd for low VOC exterior paints and wood stains | |
| Crestakyd® 10-1019 | Scott Bader | Crestakyd® 10-1019 is a top quality gloss paints for both decorative and marine applications. | |
| Crestakyd® 10-1022 | Scott Bader | Crestakyd® 10-1022 is a standard top quality alkyd for use in decorative gloss paints. | |
| Crestakyd® 10-1025 | Scott Bader | Crestakyd® 10-1025 is used for economical gloss paints and primers. | |
| Crestakyd® 10-1066 | Scott Bader | Crestakyd® 10-1066 is an air drying alkyd that has excellent brushability and flow characteristics, as well as good gloss retention and weathering resistance. It can be used for economical decorative and do-it-yourself paints, including primers, topcoats,...展开 Crestakyd® 10-1066 is an air drying alkyd that has excellent brushability and flow characteristics, as well as good gloss retention and weathering resistance. It can be used for economical decorative and do-it-yourself paints, including primers, topcoats, and varnishes. 收起 | |
| Crestakyd® 10-2020 | Scott Bader | Crestakyd® 10-2020 is a standard long oil alkyd for use in decorative gloss paints. | |
| Crestakyd® 10-2023 | Scott Bader | Crestakyd® 10-2023 is suitable for high solids wood stains and varnishes giving excellent durability. | |
| Crestakyd® 10-2033 | Scott Bader | Crestakyd® 10-2033 is a fast drying alkyd with good flow characteristics. | |
| Crestakyd® 10-2505 | Scott Bader | Crestakyd® 10-2505 is suitable for high solids decorative paints and lacquers with excellent durability. | |
| Crestakyd® 10-3000 | Scott Bader | Crestakyd® 10-3000 is an air drying alkyd with excellent brushability & flow characteristics, as well as good gloss retention & weathering resistance for top quality gloss paints used in both decorative and marine applications. | |
| Crestakyd® 10-3507 | Scott Bader | Crestakyd® 10-3507 is a top quality alkyd for use in decorative gloss paints and varnishes. | |
| Crestakyd® 20-5024 | Scott Bader | Crestakyd® 20-5024 is used for air drying and low bake industrial finishes. | |
| Crestakyd® 20-5029 | Scott Bader | Crestakyd® 20-5029 is a chain stopped alkyd used for general industrial air drying finishes and machinery enamels. | |
| Crestakyd® 20-5036 | Scott Bader | Crestakyd® 20-5036 is a chain stopped alkyd used for general industrial air drying primers and enamels. | |
| Crestakyd® 20-9021 | Scott Bader | Crestakyd® 20-9021 is an economical chain stopped alkyd used for fast drying machinery enamels. | |
| Crestakyd® 20-9074 | Scott Bader | Crestakyd® 20-9074 is a rapid drying alkyd that has excellent gloss / weathering resistance and flow characteristics. It can be used for primers and other air-dry industrial finishes. | |
| Crestakyd® 20-9509 | Scott Bader | Crestakyd® 20-9509 is a wood finishing alkyd used for lower VOC coatings. | |
| Crestakyd® 30-5005 | Scott Bader | Crestakyd® 30-5005 is a quick drying short oil alkyd used for primers and top coats for metal and wood. | |
| Crestakyd® 30-5016 | Scott Bader | Crestakyd® 30-5016 is used for very quick drying industrial paints with good all round properties. | |
| Crestakyd® 30-5049 | Scott Bader | Crestakyd® 30-5049 is a short oil alkyd with excellent cold check properties, good wet heat resistance, good stackability and excellent all round properties. It has been designed for use in acid curing finishes for wood. | |
| Crestakyd® 30-5057 | Scott Bader | Crestakyd® 30-5057 is a fast drying short oil alkyd with excellent stability and cold check properties. It can be used for easy sanding NC sealers and NC finishes. | |
| Crestakyd® 30-5067 | Scott Bader | Crestakyd® 30-5067 is a fast drying short oil alkyd supplied in xylene for use in air dry and force dry primers and topcoats. Also used for marine paints. | |
| Crestakyd® 30-5068 | Scott Bader | Crestakyd® 30-5068 is a fast drying short oil alkyd for use in air-dry and force-dry primers and topcoats. It is recommended for use in air dry and force dry primers and topcoats in a variety of general industrial metal coating applications. | |
| Crestakyd® 30-5071 | Scott Bader | Crestakyd® 30-5071 exhibits rapid drying characteristics and fast hardness development. It has very good weather resistance, excellent film build and attractive gloss. It can be used for NC finishes, acid hardening finishes and in combination with low rea...展开 Crestakyd® 30-5071 exhibits rapid drying characteristics and fast hardness development. It has very good weather resistance, excellent film build and attractive gloss. It can be used for NC finishes, acid hardening finishes and in combination with low reactivity melamine resins for industrial stoving enamels and automotive finishes. 收起 | |
| Crestakyd® 30-9055 | Scott Bader | Crestakyd® 30-9055 is a wood finishing alkyd used in nitrocellulose primers and top coats. | |
| Crestakyd® 30-9502 | Scott Bader | Crestakyd® 30-9502 is a short oil alkyd for high solids top coats with good colour and drying properties. | |
| Crestakyd® 41-5009 | Scott Bader | Crestakyd® 41-5009 is a styrene modified alkyd used for hammer finishes and quick drying enamels. Also used in the marine industry for quick drying coatings. | |
| Crestakyd® 41-6010 | Scott Bader | Crestakyd® 41-6010 is a styrene modified alkyd used for quick drying enamels. | |
| Crestakyd® 44-5027 | Scott Bader | Crestakyd® 44-5027 is a rosin and phenolic modified alkyd with exceptional drying and excellent water, petrol and oil resistance. | |
| Crestakyd® 44-5043 | Scott Bader | Crestakyd® 44-5043 is a rosin and phenolic alkyd used for general purpose. Rosin and phenolic alkyd used for dry and excellent solvent release. | |
| Dispersion Agent BLK-9918 | BELIKE Chemical Co.,Ltd. | Dispersion Agent BLK-9918 is a coating additive that is in the form of a yellow or brown liquid. This product is most commonly used as a dispersion agent in water-based paint, inks, and water-based acrylic resins. | |
| EcoFlame APP201 | Unibrom Corp. | EcoFlame APP201 is a white fine particle ammonium polyphosphate that is largely insoluble in water, completely insoluble in organic solvent, and is non-flammable and non-hygroscopic. It can be used in sealants and adhesives, polyurethane foam (PU rigid, f...展开 EcoFlame APP201 is a white fine particle ammonium polyphosphate that is largely insoluble in water, completely insoluble in organic solvent, and is non-flammable and non-hygroscopic. It can be used in sealants and adhesives, polyurethane foam (PU rigid, flexible, and rigid integral skin foam), intumescent coatings, cellulose-containing material, and in thermoplastics (PP): where it can be used in casting resin based on unsaturated PET resin and epoxy resin. EcoFlame APP201 has a molecular weight of n>1000, a pH value of 5.5 to 7.0, a density of 1.9 kg/L at 25°C, an apparent density of 0.7 kg/L, and an average particle size equal to or less than 15 um. 收起 | |
| EcoFlame APP202 | Unibrom Corp. | EcoFlame APP202 is a white fine particle ammonium polyphosphate that is largely insoluble in water, completely insoluble in organic solvent, and is non-flammable and non-hygroscopic. It can be used in sealants and adhesives, polyurethane foam (PU rigid, f...展开 EcoFlame APP202 is a white fine particle ammonium polyphosphate that is largely insoluble in water, completely insoluble in organic solvent, and is non-flammable and non-hygroscopic. It can be used in sealants and adhesives, polyurethane foam (PU rigid, flexible, and rigid integral skin foam), intumescent coatings, cellulose-containing material, and in thermoplastics (PP): where it can be used in casting resin based on unsaturated PET resin and epoxy resin. EcoFlame APP202 can also be used in favorably in intumescent coating for exterior applications where the ammonium polyphosphate is essential to have tremendously low water solubility, in cellulose-containing materials (car’s fireproof cloth, military cellulose materials, paper, and wood), and in numerous polymers for exterior applications. It has a molecular weight of n>1000, a pH value of 6.5 to 7.5, a density of 1.9 kg/L at 25°C, an apparent density of 0.7 kg/L, and an average particle size equal to or less than 15 um. 收起 | |
| EcoFlame APP203 | Unibrom Corp. | EcoFlame APP203 is a white fine particle ammonium polyphosphate that is largely insoluble in water, completely insoluble in organic solvent, and is non-flammable and non-hygroscopic. It can be used in sealants and adhesives, polyurethane foam (PU rigid, f...展开 EcoFlame APP203 is a white fine particle ammonium polyphosphate that is largely insoluble in water, completely insoluble in organic solvent, and is non-flammable and non-hygroscopic. It can be used in sealants and adhesives, polyurethane foam (PU rigid, flexible, and rigid integral skin foam), intumescent coatings, cellulose-containing material, and in thermoplastics (PP): where it can be used in casting resin based on unsaturated PET resin and epoxy resin. EcoFlame APP203 is also appropriate as acid donor for intumescent coatings and PU foams. It has a molecular weight of n>1000, a pH value of 7.5 to 8.5, a density of 1.9 kg/L at 25°C, an apparent density of 0.7 kg/L, and an average particle size equal to or less than 15 um. 收起 | |
| EcoFlame APP204 | Unibrom Corp. | EcoFlame APP204 is a white fine particle ammonium polyphosphate that is largely insoluble in water, completely insoluble in organic solvent, and is non-flammable and non-hygroscopic. It can be used in sealants and adhesives, polyurethane foam (PU rigid, f...展开 EcoFlame APP204 is a white fine particle ammonium polyphosphate that is largely insoluble in water, completely insoluble in organic solvent, and is non-flammable and non-hygroscopic. It can be used in sealants and adhesives, polyurethane foam (PU rigid, flexible, and rigid integral skin foam), intumescent coatings, cellulose-containing material, and in thermoplastics (PP): where it can be used in casting resin based on unsaturated PET resin and epoxy resin. EcoFlame APP204 can be also be favorably used in solvent radical intumescent coatings and in thermoplastics. It has a molecular weight of n>1000, a pH value of 6.5 to 7.5, a density of 1.9 kg/L at 25°C, an apparent density of 0.7 kg/L, and an average particle size equal to or less than 15 um. 收起 | |
| EcoFlame APP205 | Unibrom Corp. | EcoFlame APP205 is a white fine particle ammonium polyphosphate that is used in a range of polyethylene, polyolefin blends, thermoplastics, polypropylene, ethylene/vinyl acetate copolymers, coating compounds, hot melt adhesives, and is suitable for both i...展开 EcoFlame APP205 is a white fine particle ammonium polyphosphate that is used in a range of polyethylene, polyolefin blends, thermoplastics, polypropylene, ethylene/vinyl acetate copolymers, coating compounds, hot melt adhesives, and is suitable for both injection molding and extrusion applications. EcoFlame APP205 has a molecular weight of n>1000, a pH value of 6.0 to 8.5, a density of 1.8 kg/L at 25°C, an apparent density of 0.45 kg/L, and an average particle size equal to or less than 16 um. 收起 | |
| EcoFlame B-543 | Unibrom Corp. | EcoFlame B-543, a white powder with the chemical name of Tetrabromobisphenol A, is a brominated aromatic flame retardant used in thermoset and thermoplastic resin systems and generally used in the manufacture of flame retardant printed circuit boards, fou...展开 EcoFlame B-543, a white powder with the chemical name of Tetrabromobisphenol A, is a brominated aromatic flame retardant used in thermoset and thermoplastic resin systems and generally used in the manufacture of flame retardant printed circuit boards, found in most electrical appliances. It is also used as an intermediate, to make other flame retardants, and brominated carbon/carbonate oligomers (that use TBBA as a raw material) are used to flame retard thermoplastic resin systems such as certain grades of polycarbonate (PC) and polybutylene terephthalate (PBT). EcoFlame B-543 has a molecular weight of 543.7, a moisture percent of 0.2 max, a melting point of 179 min, and an organic bromide of 58 min. 收起 | |
| EcoFlame B-641 | Unibrom Corp. | EcoFlame B-641, a white powder/granular form with the chemical name of Hexabromocyclodeodecane, is an additive flame retardant used in a wide range of textiles, coatings, adhesives, and plastics. It has high aliphatic bromine content, resulting in minimum...展开 EcoFlame B-641, a white powder/granular form with the chemical name of Hexabromocyclodeodecane, is an additive flame retardant used in a wide range of textiles, coatings, adhesives, and plastics. It has high aliphatic bromine content, resulting in minimum effect on polymer physical properties and lower loading, and is also recommended for styrene based systems such as extruded and expanded polystyrene foams. EcoFlame B-641 has a molecular weight of 641.7, a bromine content of 74% min, a melting point of 180 min, particle size of 95% with 80 mesh passed, and a purity of 99% min. 收起 | |
| EcoFlame B-641TC | Unibrom Corp. | EcoFlame B-641TC, a white powder/granular form with the chemical name of Hexabromocyclodeodecane, is an additive flame retardant used in a wide range of textiles, coatings, adhesives, and plastics. It has high aliphatic bromine content, resulting in minim...展开 EcoFlame B-641TC, a white powder/granular form with the chemical name of Hexabromocyclodeodecane, is an additive flame retardant used in a wide range of textiles, coatings, adhesives, and plastics. It has high aliphatic bromine content, resulting in minimum effect on polymer physical properties and lower loading, and is tailor-made for coating and textile fields with disperse-ability and flow-ability. EcoFlame B-641TC has a varying particle size of 1-2, 3-5, and 7-13, it also has a molecular weight of 641.7, a bromine content of 74% min, a melting point of 180 min, and a purity of 99% min. 收起 | |
| EcoFlame B-680 | Unibrom Corp. | EcoFlame B-680, a white to off-white crystalline powder/granular form with the chemical name of 1,2 –bis (2,4,6-tribromophenoxy)ethane, is a flame retardant of ABS, elastomers, textiles, unsaturated polyesters, HIPS, Polycarbonate, adhesives, thermoplasti...展开 EcoFlame B-680, a white to off-white crystalline powder/granular form with the chemical name of 1,2 –bis (2,4,6-tribromophenoxy)ethane, is a flame retardant of ABS, elastomers, textiles, unsaturated polyesters, HIPS, Polycarbonate, adhesives, thermoplastic, and coatings. It is especially efficient for applications in which thermal stability at high processing temperatures is important. EcoFlame B-680 has a molecular weight of 688, a melting point of 220 min, and bromine of 70 min. 收起 | |
| EcoFlame B-959 | Unibrom Corp. | EcoFlame B-959, a white powder with the chemical name of decabromodiphenyl oxide, is a flame retardant additive that offers a solution to flame retardant formulations in a wide range of applications and with bromine content. It is used in wire & cable, bu...展开 EcoFlame B-959, a white powder with the chemical name of decabromodiphenyl oxide, is a flame retardant additive that offers a solution to flame retardant formulations in a wide range of applications and with bromine content. It is used in wire & cable, business machines and television cabinet formulations, elastomers, and is predominantly effective in styrenic, HIPS, polyester resins, polyamide, and polyolefins. EcoFlame B-959 is available with an average particle size of 3 um max or 6 um max, a melting point of 300 min (for the 3 um particle size) and 304.4 to 309.7 min (for the 6 um max particle size, iron content of 10 mg/kg max, an organic bromide of 82% min, a molecular weight of 959.2, and an aluminum content of 30 mg/kg max. 收起 | |
| Enamel Grade Titanium Dioxide HTD-E | Hoten Chemical International Group | Enamel Grade Titanium Dioxide HTD-E is a white powder made from a sulfuric acid process. This product has a strong opacity making a thin, smooth and acid resistant coating used in enamel and coloring material. | |
| HESS NCS-10 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-10 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-10 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-12 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-12 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-12 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-15 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-15 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-15 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-3 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-3 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-3 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-5 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-5 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-5 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-8 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-8 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-8 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HTM-A Barium Sulphate Modified | Hoten Chemical International Group | HTM-A Barium Sulphate Modified is a function filler of nano-meterclass specifically created for electronic printing and writing ink. This product is noted for an efficient pigment dispersibility and to fully retain pigment grains around it, in turn creati...展开 HTM-A Barium Sulphate Modified is a function filler of nano-meterclass specifically created for electronic printing and writing ink. This product is noted for an efficient pigment dispersibility and to fully retain pigment grains around it, in turn creating a pure vivid color image. 收起 | |
| HTM-B Barium Sulphate Modified | Hoten Chemical International Group | HTM-B Barium Sulphate Modified is a function filler of nanometer-class developed for electronic printing and writing ink. This product is noted for an efficient pigment dispersibility and to fully retain pigment grains around it, in turn creating a pure v...展开 HTM-B Barium Sulphate Modified is a function filler of nanometer-class developed for electronic printing and writing ink. This product is noted for an efficient pigment dispersibility and to fully retain pigment grains around it, in turn creating a pure vivid color image. 收起 | |
| HTM-C Barium Sulphate Modified | Hoten Chemical International Group | HTM-C Barium Sulphate Modified is a function filler of nano-meterclass specifically created for electronic printing and writing ink. This product is noted for an efficient pigment dispersibility and to fully retain pigment grains around it, in turn creati...展开 HTM-C Barium Sulphate Modified is a function filler of nano-meterclass specifically created for electronic printing and writing ink. This product is noted for an efficient pigment dispersibility and to fully retain pigment grains around it, in turn creating a pure vivid color image. 收起 | |
| HTN-NO Barium Sulfate Natural | Hoten Chemical International Group | HTN-NO Barium Sulfate Natural is a natural function filler that can be used in paint and improve concentration of coatings. | |
| HTN-NP Barium Sulfate Natural | Hoten Chemical International Group | HTN-NP Barium Sulfate Natural is a natural filler than can be used to improve the concentration of coatings and reduce levels of resin and solvent in formulas for cost-cutting measures. | |
| HTN-NQ Barium Sulfate Natural | Hoten Chemical International Group | HTN-NQ Barium Sulfate Natural is a natural filler than can be used to improve the concentration of coatings and reduce levels of resin and solvent in formulas for cost-cutting measures. | |
| HTN-NR Barium Sulfate Natural | Hoten Chemical International Group | HTN-NR Barium Sulfate Natural is a natural filler than can be used to improve the concentration of coatings and reduce levels of resin and solvent in formulas for cost-cutting measures. | |
| HTN-NS Barium Sulfate Natural | Hoten Chemical International Group | HTN-NS Barium Sulfate Natural is a natural filler than can be used to improve the concentration of coatings and reduce levels of resin and solvent in formulas for cost-cutting measures. | |
| HTS-H Synthetic Barium Sulfate | Hoten Chemical International Group | HTS-H Synthetic Barium Sulfate is a chemically synthesized barium sulfate derived from the processing of barium salt and sodium sulfate. As a filler, it can be used to cut costs on resin, and has good light fastness, weathering resistance, and narrow dist...展开 HTS-H Synthetic Barium Sulfate is a chemically synthesized barium sulfate derived from the processing of barium salt and sodium sulfate. As a filler, it can be used to cut costs on resin, and has good light fastness, weathering resistance, and narrow distribution of grain sizes. This product is used in several coating applications. 收起 | |
| HTS-L Synthetic Barium Sulfate | Hoten Chemical International Group | HTS-L Synthetic Barium Sulfate is a chemically synthesized barium sulfate product derived from pure barium salt and sodium sulfate. As a filler, it can be used to cut costs on resin, and has good light fastness, weathering resistance, and narrow distribut...展开 HTS-L Synthetic Barium Sulfate is a chemically synthesized barium sulfate product derived from pure barium salt and sodium sulfate. As a filler, it can be used to cut costs on resin, and has good light fastness, weathering resistance, and narrow distribution of grain sizes. This product is used in several coating applications. 收起 | |
| HTS-M Synthetic Barium Sulfate | Hoten Chemical International Group | HTS-M Synthetic Barium Sulfate is a chemically synthesized barium sulfate product derived from pure barium salt and sodium sulfate. As a filler, it can be used to cut costs on resin, and has good light fastness, weathering resistance, and narrow distribut...展开 HTS-M Synthetic Barium Sulfate is a chemically synthesized barium sulfate product derived from pure barium salt and sodium sulfate. As a filler, it can be used to cut costs on resin, and has good light fastness, weathering resistance, and narrow distribution of grain sizes. This product is used in several coating applications. 收起 | |
| Texicryl® 13-503 | Scott Bader | Texicryl® 13-503 is designed for printing inks and non absorbent, low energy substrates, gives excellent wet rub performance. | |
| Texicryl® 13-525 | Scott Bader | Texicryl® 13-525 is for high quality blister packaging applications with superb seal integrity. High gloss, good levelling, low blocking. Modifier for natural rubber latex in cold seal applications. | |
| Texicryl® 13-526 | Scott Bader | Texicryl® 13-526 is a high performance styrene acrylic copolymer designed for use in cold seal adhesives. Excellent early water resistance. | |
| Texicryl® 13-527 | Scott Bader | Texicryl® 13-527 is a cold seal adhesive binder with high pigment binding properties. Can be used in combination with Texicryl® 13-528 to achieve desired properties. | |
| Texicryl® 13-528 | Scott Bader | Texicryl® 13-528 is a soft styrene acrylic copolymer which can be used to modify the adhesion characteristics of latex based adhesives. | |
| Texicryl® 13-809 | Scott Bader | Texicryl® 13-809 is a hard emulsion for high gloss, fast drying coatings, OPV’s and inks. Can be used as deblocking modifier. | |
| Texicryl® 13-812 | Scott Bader | Texicryl® 13-812 is a high efficiency alkali soluble binder for flexographic printing of cartons and paper sacks. | |
| Texicryl® 13-813 | Scott Bader | Texicryl® 13-813 is a low odour, soft polymer with superior gloss and holdout for use in verprint varnishes. Heat sealable. | |
| Texicryl® 13-814 | Scott Bader | Texicryl® 13-814 is a soft polymer with excellent water barrier properties for OPV’s and inks. Heat sealable. Very low Cobb value. Low slip coefficient. | |
| Texicryl® 13-819 | Scott Bader | Texicryl® 13-819 is an emulsion vehicle with unique plasticiser technology. Good heat/blocking resistance, for highest gloss applications. | |
| Texicryl® 13-824 | Scott Bader | Texicryl® 13-824 is a hard non film forming emulsion which can be coalesced to form a plasticiser and solvent resistant film. Excellent adhesion to vinyl and non-absorbent susbstrates. Suitable for inks PVC flooring and wallpaper. | |
| Texicryl® 13-828 | Scott Bader | Texicryl® 13-828 is a higly efficient alkali swellable emulsion designed for waterbased printing ink formulations. Flexographic inks for corrugated board. Suitable as a pigment grinding medium and let down vehicle. | |
| Texicryl® 4025 | Scott Bader | Texicryl® 4025 is an alkali swellable emulsion designed for waterbased printing ink formulations. It has excellent colour development, good heat sealability and gives low blocking. Texicryl® 4025 is cross-linkable with thermoset resins, compatable with s...展开 Texicryl® 4025 is an alkali swellable emulsion designed for waterbased printing ink formulations. It has excellent colour development, good heat sealability and gives low blocking. Texicryl® 4025 is cross-linkable with thermoset resins, compatable with solvents and other resin systems. 收起 | |
| Texipol® 63-201 | Scott Bader | Texipol® 63-201 is an inverse emulsion thickener that imparts a stringy and mildly pseudoplastic rheology to aqueous based compositions. | |
| Texipol® 63-202 | Scott Bader | Texipol® 63-202 is an inverse emulsion thickener that imparts a pseudoplastic rheology to aqueous based compositions. | |
| Texipol® 63-237 | Scott Bader | Texipol® 63-237 is a multifunctional inverse emulsion thickener developed specifically for the pigment printing of textiles. | |
| Texipol® 63-258 | Scott Bader | Texipol® 63-258 is an inverse emulsion thickener that imparts a highly pseudoplastic rheology to aqueous based compositions. | |
| Texipol® 63-259 | Scott Bader | Texipol® 63-259 is a California Prop 65 free, APEO free, inverse emulsion rheology modifier that imparts a highly pseudoplastic rheology to aqueous based compositions. Texipol® 63-259 is supplied as a pourable, low viscosity liquid that gives almost insta...展开 Texipol® 63-259 is a California Prop 65 free, APEO free, inverse emulsion rheology modifier that imparts a highly pseudoplastic rheology to aqueous based compositions. Texipol® 63-259 is supplied as a pourable, low viscosity liquid that gives almost instantaneous thickening when mixed directly into water-based formulations. 收起 | |
| Texipol® 63-510 | Scott Bader | Texipol® 63-510 is an inverse emulsion designed to thicken over a wide pH range, exceptional performance at low pH. | |
| Texipol® 63-513 | Scott Bader | Texipol® 63-513 is a next generation inverse emulsion synthetic thickener based on a significant proportion of bio-derived content. Texipol® 63-513 imparts pseudoplastic rheology to aqueous compositions and is supplied as a pre-neutralised dispersion as t...展开 Texipol® 63-513 is a next generation inverse emulsion synthetic thickener based on a significant proportion of bio-derived content. Texipol® 63-513 imparts pseudoplastic rheology to aqueous compositions and is supplied as a pre-neutralised dispersion as the sodium salt of an acrylic based polymer. Texipol® 63-513 shows broad pH compatibility. 收起 | |
| Titanium Dioxide Anatase | Hoten Chemical International Group | Titanium Dioxide Anatase is a white powder derived from titanium concentrates and sulfuric acid. This anatase titanium dioxide pigment can provide whiteness, gloss, and high intensity in paints, coatings, and printing inks. | |
| Titanium Dioxide Rutile for Paint Industry HTD-R100 | Hoten Chemical International Group | Titanium Dioxide Rutile for Paint Industry HTD-R100 is a white powder derived from titanium concentrates and sulfuric acid. This rutile titanium dioxide pigment surface is treated by inorganic alumina and silicon to provide whiteness, gloss, high tinting ...展开 Titanium Dioxide Rutile for Paint Industry HTD-R100 is a white powder derived from titanium concentrates and sulfuric acid. This rutile titanium dioxide pigment surface is treated by inorganic alumina and silicon to provide whiteness, gloss, high tinting strength, durability and dispersion properties to coating, paint, and printing inks. 收起 | |
| Titanium Dioxide Rutile HTD-R100 | Hoten Chemical International Group | Titanium Dioxide Rutile HTD-R100 is a white powder derived from titanium concentrates and sulfuric acid. This rutile titanium dioxide pigment surface is treated by inorganic alumina and silicon to provide whiteness, gloss, high tinting strength, durabilit...展开 Titanium Dioxide Rutile HTD-R100 is a white powder derived from titanium concentrates and sulfuric acid. This rutile titanium dioxide pigment surface is treated by inorganic alumina and silicon to provide whiteness, gloss, high tinting strength, durability and dispersion properties to coating, paint, and printing ink. 收起 | |
| Water-based Acrylic Emulsion BT-WBE1133 | BELIKE Chemical Co.,Ltd. | Water-based Acrylic Emulsion BT-WBE1133 is a self-cross linking acrylic emulsion that has good alkali resistance, excellent transparency, and quick drying properties. This product is most commonly used in water-based wood coatings. | |
| Water-based Acrylic Emulsion BT-WBE3000 | BELIKE Chemical Co.,Ltd. | Water-based Acrylic Emulsion BT-WBE3000 is a self-cross linking acrylic emulsion that has good alkali resistance, excellent hardness, and quick drying properties. This product is most commonly used in water-based wood coatings. | |
| Zinc Stearate BT-1829 | BELIKE Chemical Co.,Ltd. | Zinc Stearate BT-1829 is a coating additive that is most commonly used as an anti-setting agent in paint and as a flatting agent in coatings. |
