| Alcohol Soluble Maleic Resin WMR110 | Resin Chemicals Co., Ltd. | Alcohol Soluble Maleic Resin WMR110 is a raw material created from modified maleic resins through the esterification of polyalcohol. It is a bead or flake in appearance with a softening point of 100-120°C. This product is commonly used to provide high glo...展开 Alcohol Soluble Maleic Resin WMR110 is a raw material created from modified maleic resins through the esterification of polyalcohol. It is a bead or flake in appearance with a softening point of 100-120°C. This product is commonly used to provide high gloss and fast drying in alcohol soluble printing inks and water-based inks. 收起 | |
| Alcohol Soluble Maleic Resin WMR130 | Resin Chemicals Co., Ltd. | Alcohol Soluble Maleic Resin WMR130 is a raw material created from modified maleic resins through the esterification of polyalcohol. It is a bead or flake in appearance with a softening point of 120-140°C. This product is commonly used to provide high glo...展开 Alcohol Soluble Maleic Resin WMR130 is a raw material created from modified maleic resins through the esterification of polyalcohol. It is a bead or flake in appearance with a softening point of 120-140°C. This product is commonly used to provide high gloss and fast drying in alcohol soluble printing inks and water-based inks. 收起 | |
| Alcohol Soluble Maleic Resin WMR150 | Resin Chemicals Co., Ltd. | Alcohol Soluble Maleic Resin WMR150 is a raw material created from modified maleic resins through the esterification of polyalcohol. It is a bead or flake in appearance with a softening point of 140-150°C. This product is commonly used to provide high glo...展开 Alcohol Soluble Maleic Resin WMR150 is a raw material created from modified maleic resins through the esterification of polyalcohol. It is a bead or flake in appearance with a softening point of 140-150°C. This product is commonly used to provide high gloss and fast drying in alcohol soluble printing inks and water-based inks. 收起 | |
| Barium Chloride | BassTech International | Barium Chloride is the ionic chemical compound with the formula BaCL2 and is one of the most important water-soluble barium salts. This product has a variety of uses such as in the manufacturing of heat treatment salts, case hardening of steel, in the man...展开 Barium Chloride is the ionic chemical compound with the formula BaCL2 and is one of the most important water-soluble barium salts. This product has a variety of uses such as in the manufacturing of heat treatment salts, case hardening of steel, in the manufacture of pigments, oil lubricants, PVC stabilizers and in the manufacture of other barium salts, such as Barium Sulfate, Barium Chromate and Barium Fluoride. 收起 | |
| Barium Nitrate | BassTech International | Barium Nitrate is a salt of barium and the nitrate ion, with chemical formula Ba(NO3)2 which appears as a white solid. This product is used in paint, coatings, and inks. | |
| Blanc Fixe | BassTech International | Blanc Fixe is water and organic solven insoluble and appears as color-neutral due to its low refractive index. This product is used as a component of white pigment, as a transparent filler that prevents flocculation of colored pigments, or to modify consi...展开 Blanc Fixe is water and organic solven insoluble and appears as color-neutral due to its low refractive index. This product is used as a component of white pigment, as a transparent filler that prevents flocculation of colored pigments, or to modify consistency, depending on the application and grade. 收起 | |
| Budit 3 | BassTech International | Budit 3 is a pulverized Sodium Polyphosphate glass which is used as a chemical binder in paint, coatings, and inks. This product is best used in applications which are stable, free flowing, and have a rapid rate of solution. | |
| Budit 3H | BassTech International | Budit 3H is a pulverized Sodium Polyphosphate glass which is used as a chemical binder in paint, coatings, and inks. This product is best used in applications which are stable, free flowing, and have a rapid rate of solution. | |
| Budit 4 | BassTech International | Budit 4 is a pulverized Sodium Polyphosphate glass which is used as a chemical binder in paint, coatings, and inks. This product is best used in applications which are stable, free flowing, and have a rapid rate of solution. | |
| Budit 4H | BassTech International | Budit 4H is a pulverized Sodium Polyphosphate glass which is used as a chemical binder in paint, coatings, and inks. This product is best used in applications which are stable, free flowing, and have a rapid rate of solution. | |
| Budit 6 | BassTech International | Budit 6 is a pulverized Sodium Polyphosphate glass which is used as a chemical binder in paint, coatings, and inks. This product is best used in applications which are stable, free flowing, and have a rapid rate of solution. | |
| Budit 6H | BassTech International | Budit 6H is a pulverized Sodium Polyphosphate glass which is used as a chemical binder in paint, coatings, and inks. This product is best used in applications which are stable, free flowing, and have a rapid rate of solution. | |
| Budit 7 | BassTech International | Budit 7 is a pulverized Sodium Polyphosphate glass which is used as a chemical binder in paint, coatings, and inks. This product is best used in applications which are stable, free flowing, and have a rapid rate of solution. | |
| Budit 7H | BassTech International | Budit 7H is a pulverized Sodium Polyphosphate glass which is used as a chemical binder in paint, coatings, and inks. This product is best used in applications which are stable, free flowing, and have a rapid rate of solution. | |
| Budit 8H | BassTech International | Budit 8H is a pulverized Sodium Polyphosphate glass which is used as a chemical binder in paint, coatings, and inks. This product is best used in applications which are stable, free flowing, and have a rapid rate of solution. | |
| Budit 9 | BassTech International | Budit 9 is a pulverized Sodium Polyphosphate glass which is used as a chemical binder in paint, coatings, and inks. This product is best used in applications which are stable, free flowing, and have a rapid rate of solution. | |
| BURGESS 2211 | Burgess Pigment Company | BURGESS 2211 is a surface modified calcined aluminum silicate that has low warpage and high impact strength. This product is often used in urethane and polyester applications, and can also be used as an extender or filler in paints, coatings, adhesives, a...展开 BURGESS 2211 is a surface modified calcined aluminum silicate that has low warpage and high impact strength. This product is often used in urethane and polyester applications, and can also be used as an extender or filler in paints, coatings, adhesives, and sealants. 收起 | |
| BURGESS 30P® | Burgess Pigment Company | BURGESS 30P® is a flash calcined median particle size clay used extensively in PVC compounds for improving electricals. This product exhibits low specific gravity and excellent color, and can be used as an extender or filler in paints, coatings, adhesives...展开 BURGESS 30P® is a flash calcined median particle size clay used extensively in PVC compounds for improving electricals. This product exhibits low specific gravity and excellent color, and can be used as an extender or filler in paints, coatings, adhesives, and sealants. 收起 | |
| BURGESS 5178 | Burgess Pigment Company | BURGESS 5178 is hydrophobic and a chemical bond between the calcined clay and the polymer exists. This product has been designed to provide excellent wet and dry electrical properties through a proprietary surface treatment. It is often used as an extende...展开 BURGESS 5178 is hydrophobic and a chemical bond between the calcined clay and the polymer exists. This product has been designed to provide excellent wet and dry electrical properties through a proprietary surface treatment. It is often used as an extender or filler in paints, coatings, adhesives, and sealants. 收起 | |
| BURGESS CB | Burgess Pigment Company | BURGESS CB is a surface modified calcined aluminum silicate that has been designed for use in crosslinked polyethylene and polyester. This product can be used as an extender or filler in paints, coatings, adhesives, and sealants. | |
| BURGESS ICEBERG® | Burgess Pigment Company | BURGESS ICEBERG® is a conventionally calcined median particle size, 91-93 GE brightness clay used as an extender of TiO2. It is used in trade sales interior/exterior flat paints and as a filler in polyurethane sealants. This product can provide better opa...展开 BURGESS ICEBERG® is a conventionally calcined median particle size, 91-93 GE brightness clay used as an extender of TiO2. It is used in trade sales interior/exterior flat paints and as a filler in polyurethane sealants. This product can provide better opacity, higher degree of whiteness, better tint strength, easy dispersion, and low moisture levels in moisture sensitive applications. 收起 | |
| BURGESS ICECAP K® | Burgess Pigment Company | BURGESS ICECAP K® is an excellent extender for TiO2 in coatings where a high hegman grind is required. It has good electricals, low compression set, and low water absorption. This product can be used as an extender or filler in paints, coatings, adhesives...展开 BURGESS ICECAP K® is an excellent extender for TiO2 in coatings where a high hegman grind is required. It has good electricals, low compression set, and low water absorption. This product can be used as an extender or filler in paints, coatings, adhesives, and sealants. 收起 | |
| BURGESS ICECAP KSF | Burgess Pigment Company | BURGESS ICECAP KSF is a medium particle size anhydrous (calcined) kaolin clay that is used extensively as a “mild abrasive agent” in various polish applications. This product is a very finely ground dry white powder that exhibits dispersion and extremely ...展开 BURGESS ICECAP KSF is a medium particle size anhydrous (calcined) kaolin clay that is used extensively as a “mild abrasive agent” in various polish applications. This product is a very finely ground dry white powder that exhibits dispersion and extremely low 325 (45 micron) mesh residue. 收起 | |
| BURGESS KE | Burgess Pigment Company | BURGESS KE is an uniquely processed silane modified anhydrous aluminum silicate designed for use in crosslinked polyethylene and polyester systems. This product is a very pure, high brightness, low residue, calcined kaolin that can be used as an extender ...展开 BURGESS KE is an uniquely processed silane modified anhydrous aluminum silicate designed for use in crosslinked polyethylene and polyester systems. This product is a very pure, high brightness, low residue, calcined kaolin that can be used as an extender or filler in paints, coatings, adhesives, and sealants. 收起 | |
| BURGESS NO. 10 | Burgess Pigment Company | BURGESS NO. 10 is a fine particle size, medium brightness hydrous kaolin clay. This product exhibits dispersion in water based, acid pH, alkyd, or solvent based coatings and inks, electrodeposition body primers, as well as EIFS. | |
| BURGESS NO. 17 | Burgess Pigment Company | BURGESS NO. 17 is a fine particle size, high brightness hydrous kaolin clay used to extend TiO2 in semigloss paints and inks. This product is well ground, has excellent whiteness and dispersion, and high brightness. | |
| BURGESS NO. 20 | Burgess Pigment Company | BURGESS NO. 20 is a fine particle size, medium brightness hydrous kaolin clay. This product is used in jacketing layer of wire and cable insulation compounds, rubber roll covers, polishing compounds and concrete curing compounds. It can also be used as an...展开 BURGESS NO. 20 is a fine particle size, medium brightness hydrous kaolin clay. This product is used in jacketing layer of wire and cable insulation compounds, rubber roll covers, polishing compounds and concrete curing compounds. It can also be used as an extender or filler in paints, coatings, adhesives, and sealants. 收起 | |
| BURGESS NO. 27 | Burgess Pigment Company | BURGESS NO. 27 is an ultra fine particle size, medium brightness hydrous kaolin clay. This product is used as an extender in semigloss, satin, and gloss paints. | |
| BURGESS NO. 28 | Burgess Pigment Company | BURGESS NO. 28 is an ultra fine particle size, higher brightness hydrous kaolin clay. This product is used to extend TiO2 while maintaining tint strength and gloss. It is used extensively in water based satin and semigloss coating systems. | |
| BURGESS NO. 30® | Burgess Pigment Company | BURGESS NO. 30® is a partially calcined clay used extensively in PVC compounds to improve insulation resistance. This product exhibits excellent dispersion and color uniformity, and can be used as an extender or filler in paints, coatings, adhesives, and ...展开 BURGESS NO. 30® is a partially calcined clay used extensively in PVC compounds to improve insulation resistance. This product exhibits excellent dispersion and color uniformity, and can be used as an extender or filler in paints, coatings, adhesives, and sealants. 收起 | |
| BURGESS NO. 40 | Burgess Pigment Company | BURGESS NO. 40 is a median particle size, medium brightness hydrous kaolin clay. This product is an acid pH clay exhibiting excellent dispersion properties, and can be used in trade sales coatings and adhesives. | |
| BURGESS NO. 50® | Burgess Pigment Company | BURGESS NO. 50® is a high brightness, fine particle size calcined kaolin that is an extender of TiO2 in coatings or polymeric systems. This product facilitates reduction of prime pigment while maintaining opacity, whiteness, and tint strength of coatings ...展开 BURGESS NO. 50® is a high brightness, fine particle size calcined kaolin that is an extender of TiO2 in coatings or polymeric systems. This product facilitates reduction of prime pigment while maintaining opacity, whiteness, and tint strength of coatings and retention of physical properties in filled polymeric systems. 收起 | |
| BURGESS NO. 60 | Burgess Pigment Company | BURGESS NO. 60 is an acid pH, fine particle size, medium brightness hydrous kaolin clay with excellent dispersion properties. This product is used in inks, adhesives and industrial finishes, electrostatic deposition body primers, and EIFS. | |
| BURGESS NO. 97 | Burgess Pigment Company | BURGESS NO. 97 is an ultra fine particle size, medium brightness hydrous kaolin clay that exhibits excellent tint strength. This product is a well-ground extender of TiO2 in semigloss, satin, and gloss paints. | |
| BURGESS NO. 98 | Burgess Pigment Company | BURGESS NO. 98 is an ultra fine particle size, higher brightness hydrous kaolin clay that exhibits excellent tint strength and dispersion. This product is a well ground, premium extender of TiO2 in water based, solvent or alkyd semigloss, satin, and gloss...展开 BURGESS NO. 98 is an ultra fine particle size, higher brightness hydrous kaolin clay that exhibits excellent tint strength and dispersion. This product is a well ground, premium extender of TiO2 in water based, solvent or alkyd semigloss, satin, and gloss paints. 收起 | |
| BURGESS OPTIPOZZ® | Burgess Pigment Company | BURGESS OPTIPOZZ® is a high reactivity metakaolin produced by a patented process. This product increases chemical resistance and durability, and reduces shrinkage. It can be used as an extender or filler in paints, coatings, adhesives, and sealants. | |
| BURGESS OPTIWHITE® | Burgess Pigment Company | BURGESS OPTIWHITE® is a premium whiteness flash calcined extender for TiO2 exhibiting GE brightness used extensively in First Line interior/exterior flat or low sheen water based and alkyd paint systems. This product exhibits excellent whiteness retention...展开 BURGESS OPTIWHITE® is a premium whiteness flash calcined extender for TiO2 exhibiting GE brightness used extensively in First Line interior/exterior flat or low sheen water based and alkyd paint systems. This product exhibits excellent whiteness retention and hiding when embedded in coatings and polymers. It can provide excellent dispersion, high hiding, and improved film properties. 收起 | |
| BURGESS OPTIWHITE MX® | Burgess Pigment Company | BURGESS OPTIWHITE MX® is a flash calcined clay exhibiting GE Brightness and extension of TiO2, whiteness, touchup, and tint strength. This product is used extensively in flat or low sheen interior/exterior trade sales water-based, alkyd, or solvent-based ...展开 BURGESS OPTIWHITE MX® is a flash calcined clay exhibiting GE Brightness and extension of TiO2, whiteness, touchup, and tint strength. This product is used extensively in flat or low sheen interior/exterior trade sales water-based, alkyd, or solvent-based coatings by reducing the amount of TiO2 and lowering raw material costs while maintaining opacity, whiteness, and tint strength. 收起 | |
| BURGESS OPTIWHITE P® | Burgess Pigment Company | BURGESS OPTIWHITE P® is a flash calcined clay used extensively to extend TiO2. This product exhibits GE Brightness, improves touchup, scrub, and burnish resistance. It is used in flat interior trade sales paints which do not require maximum whiteness. | |
| BURGESS POLYCLAY | Burgess Pigment Company | BURGESS POLYCLAY is a fine particle size, medium brightness hydrous kaolin clay used in inks. | |
| BURGESS THERMOGLACE H | Burgess Pigment Company | BURGESS THERMOGLACE H is a delaminated, fine particle size, medium brightness hydrous kaolin clay. This product is used in primers and trade sales coatings for the reduction of mud-cracking (micro-cracking due to film stress) and reduction of permeability...展开 BURGESS THERMOGLACE H is a delaminated, fine particle size, medium brightness hydrous kaolin clay. This product is used in primers and trade sales coatings for the reduction of mud-cracking (micro-cracking due to film stress) and reduction of permeability. 收起 | |
| Dimethyl Carbonate | Linyi Lixing Chemical Co., Ltd. | Dimethyl Carbonate is a clear transparent liquid that is insoluble in water, but soluble and compatible with most other organic solvents including alcohol, ketone, and ethers. This product finds application as an additive in paints and coatings. | |
| Disproportionated Rosin 1st Grade | Resin Chemicals Co., Ltd. | Disproportionated Rosin 1st Grade is a raw material produced by isomerizing gum rosin with a catalyst. This product is commonly used as a polymer emulsification agent in the production of water-soluble pressure sensitive adhesives. It has a maximum abieti...展开 Disproportionated Rosin 1st Grade is a raw material produced by isomerizing gum rosin with a catalyst. This product is commonly used as a polymer emulsification agent in the production of water-soluble pressure sensitive adhesives. It has a maximum abietic acid content of 0.5% and a softening point of 76°C. 收起 | |
| Disproportionated Rosin Extra Grade | Resin Chemicals Co., Ltd. | Disproportionated Rosin Extra Grade is a raw material produced by isomerizing gum rosin with a catalyst. This product is commonly used as a polymer emulsification agent in the production of water-soluble pressure sensitive adhesives. It has a maximum abie...展开 Disproportionated Rosin Extra Grade is a raw material produced by isomerizing gum rosin with a catalyst. This product is commonly used as a polymer emulsification agent in the production of water-soluble pressure sensitive adhesives. It has a maximum abietic acid content of 0.1% and a softening point of 76°C. 收起 | |
| Dorkafill® H | BassTech International | Dorkafill® H is a functional filler in paint, coatings, and inks. This product brings matting properties and viscosity alongside basic performance (brightness, opacity, hardness, etc) and often allows an increase of the pigment volume concentration (PVC) ...展开 Dorkafill® H is a functional filler in paint, coatings, and inks. This product brings matting properties and viscosity alongside basic performance (brightness, opacity, hardness, etc) and often allows an increase of the pigment volume concentration (PVC) without a loss of quality. 收起 | |
| Dorkafill® Pro_Void | BassTech International | Dorkafill® Pro_Void is a functional filler in paint, coatings, and inks. This product provides matting properties and scrub resistance which result in lower oil absorption (and thus a reduction in resin, advantages in dispersion, viscosity and more flexib...展开 Dorkafill® Pro_Void is a functional filler in paint, coatings, and inks. This product provides matting properties and scrub resistance which result in lower oil absorption (and thus a reduction in resin, advantages in dispersion, viscosity and more flexibility in fine tuning of the paint e.g. open time). 收起 | |
| Fabutit 734 | BassTech International | Fabutit 734 is a modified STPP (Sodium Tripolyphosphate) which acts as a deflocculant in paint, coatings, and inks. This product is three times more effective than standard STPP and is water soluble. | |
| Green Chrome Oxide | BassTech International | Green Chrome Oxide is the inorganic compound of the formula Cr2O3 which is a principal oxide of chromium and is used as a pigment. This product provides opacity, outdoor durability and heat fastness to paint, coatings, and inks. | |
| Gum Rosin K | Resin Chemicals Co., Ltd. | Gum Rosin K is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a yellow-red, transparent solid in appearance with a softening point of 74°C. This product is used to provide special chemical activity in ...展开 Gum Rosin K is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a yellow-red, transparent solid in appearance with a softening point of 74°C. This product is used to provide special chemical activity in the production of coatings, inks, and rosin ester resins. 收起 | |
| Gum Rosin M | Resin Chemicals Co., Ltd. | Gum Rosin M is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a yellow brown, transparent solid in appearance with a softening point of 74°C. This product is used to provide special chemical activity i...展开 Gum Rosin M is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a yellow brown, transparent solid in appearance with a softening point of 74°C. This product is used to provide special chemical activity in the production of coatings, inks, and rosin ester resins. 收起 | |
| Gum Rosin N | Resin Chemicals Co., Ltd. | Gum Rosin N is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a deep yellow, transparent solid in appearance with a softening point of 75°C. This product is used to provide special chemical activity in...展开 Gum Rosin N is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a deep yellow, transparent solid in appearance with a softening point of 75°C. This product is used to provide special chemical activity in the production of coatings, inks, and rosin ester resins. 收起 | |
| Gum Rosin WG | Resin Chemicals Co., Ltd. | Gum Rosin WG is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a yellow, transparent solid in appearance with a softening point of 75°C. This product is used to provide special chemical activity in the...展开 Gum Rosin WG is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a yellow, transparent solid in appearance with a softening point of 75°C. This product is used to provide special chemical activity in the production of coatings, inks, and rosin ester resins. 收起 | |
| Gum Rosin WW | Resin Chemicals Co., Ltd. | Gum Rosin WW is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a pale yellow, transparent solid in appearance with a softening point of 76°C. This product is used to provide special chemical activity i...展开 Gum Rosin WW is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a pale yellow, transparent solid in appearance with a softening point of 76°C. This product is used to provide special chemical activity in the production of coatings, inks, and rosin ester resins. 收起 | |
| Gum Rosin X | Resin Chemicals Co., Ltd. | Gum Rosin X is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a slightly yellow, transparent solid in appearance with a softening point of 76°C. This product is used to provide special chemical activit...展开 Gum Rosin X is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a slightly yellow, transparent solid in appearance with a softening point of 76°C. This product is used to provide special chemical activity in the production of coatings, inks, and rosin ester resins. 收起 | |
| Heavy Turpentine Oil | Resin Chemicals Co., Ltd. | Heavy Turpentine Oil is pinene with special chemical composition that is primarily used as a solvent. It is transparent in appearance with a maximum relative density of 0.94. This product is commonly used in the manufacturing of applications such as coati...展开 Heavy Turpentine Oil is pinene with special chemical composition that is primarily used as a solvent. It is transparent in appearance with a maximum relative density of 0.94. This product is commonly used in the manufacturing of applications such as coatings, synthetic camphor, synthetic resin, and organic industrial products. 收起 | |
| HESS NCS-10 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-10 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-10 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-12 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-12 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-12 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-15 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-15 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-15 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-3 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-3 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-3 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-5 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-5 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-5 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-8 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-8 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-8 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| Hydrocarbon DCPD Resin HSU100 | Resin Chemicals Co., Ltd. | Hydrocarbon DCPD Resin HSU100 is a water-white thermoplastic resin produced from polymerization and hydrogenation of cyclic ingredients. This product is designed to provide good heat resistance and good compatibility with base polymers. It is often used a...展开 Hydrocarbon DCPD Resin HSU100 is a water-white thermoplastic resin produced from polymerization and hydrogenation of cyclic ingredients. This product is designed to provide good heat resistance and good compatibility with base polymers. It is often used as a tackifier for hot melt adhesives, hot melt pressure sensitive adhesives, and solvent-based pressure sensitive adhesives. 收起 | |
| Hydrocarbon Resin C5 HPE100A | Resin Chemicals Co., Ltd. | Hydrocarbon Resin C5 HPE100A is a raw material designed to provide light color, heat resistance, anti-oxidant properties, and bonding strength. This product is a yellow solid with a flake or bead-like appearance and is commonly used in the manufacturing o...展开 Hydrocarbon Resin C5 HPE100A is a raw material designed to provide light color, heat resistance, anti-oxidant properties, and bonding strength. This product is a yellow solid with a flake or bead-like appearance and is commonly used in the manufacturing of hot melt adhesives, pressure sensitive adhesives, and glue. 收起 | |
| Hydrocarbon Resin C5 HPE100A-L | Resin Chemicals Co., Ltd. | Hydrocarbon Resin C5 HPE100A-L is a raw material designed to provide light color, heat resistance, anti-oxidant properties, and bonding strength. This product is a yellow solid with a flake or bead-like appearance and is commonly used in the manufacturing...展开 Hydrocarbon Resin C5 HPE100A-L is a raw material designed to provide light color, heat resistance, anti-oxidant properties, and bonding strength. This product is a yellow solid with a flake or bead-like appearance and is commonly used in the manufacturing of hot melt adhesives, pressure sensitive adhesives, and glue. 收起 | |
| Hydrocarbon Resin C5 HPE100R | Resin Chemicals Co., Ltd. | Hydrocarbon Resin C5 HPE100R is a raw material used to provide resistance to crushing, abrasion, and smudge while providing fast drying properties. It has a Voc of 0.4 mg/m3 and a softening point of 98-102°C. This product is commonly applied in thermoplas...展开 Hydrocarbon Resin C5 HPE100R is a raw material used to provide resistance to crushing, abrasion, and smudge while providing fast drying properties. It has a Voc of 0.4 mg/m3 and a softening point of 98-102°C. This product is commonly applied in thermoplastic road-marking paints, bitumen road surfaces, asphalt, and cement road surfaces. 收起 | |
| Hydrocarbon Resin C5 HPE100R-S | Resin Chemicals Co., Ltd. | Hydrocarbon Resin C5 HPE100R-S is a raw material used to provide resistance to crushing, abrasion, and smudge while providing fast drying properties. It has a Voc of 0.8 mg/m3 and a softening point of 98-102°C. This product is commonly applied in thermopl...展开 Hydrocarbon Resin C5 HPE100R-S is a raw material used to provide resistance to crushing, abrasion, and smudge while providing fast drying properties. It has a Voc of 0.8 mg/m3 and a softening point of 98-102°C. This product is commonly applied in thermoplastic road-marking paints, bitumen road surfaces, asphalt, and cement road surfaces. 收起 | |
| Hydrocarbon Resin C9 HPE100P | Resin Chemicals Co., Ltd. | Hydrocarbon Resin C9 HPE100P is an aromatic, low molecular weight thermoplastic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide solubility, water resistance, insulation, low...展开 Hydrocarbon Resin C9 HPE100P is an aromatic, low molecular weight thermoplastic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide solubility, water resistance, insulation, low heat conduction, and chemical stability in adhesives, paints, and inks. It has a softening point of 90-110°C and is soluble in coal tars, esters, and turpentine oil. 收起 | |
| Hydrocarbon Resin C9 HPE100P-D | Resin Chemicals Co., Ltd. | Hydrocarbon Resin C9 HPE100P-D is an aromatic, low molecular weight thermoplastic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide solubility, water resistance, insulation, l...展开 Hydrocarbon Resin C9 HPE100P-D is an aromatic, low molecular weight thermoplastic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide solubility, water resistance, insulation, low heat conduction, and chemical stability in adhesives, paints, and inks. It has a softening point of 90-110°C and is soluble in coal tars, esters, and turpentine oil. 收起 | |
| Hydrocarbon Resin C9 HPE120P | Resin Chemicals Co., Ltd. | Hydrocarbon Resin C9 HPE120P is an aromatic, low molecular weight thermoplastic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide solubility, water resistance, insulation, low...展开 Hydrocarbon Resin C9 HPE120P is an aromatic, low molecular weight thermoplastic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide solubility, water resistance, insulation, low heat conduction, and chemical stability in adhesives, paints, and inks. It has a softening point of 110-140°C and is soluble in coal tars, esters, and turpentine oil. 收起 | |
| Hydrocarbon Resin C9 HPE120P-D | Resin Chemicals Co., Ltd. | Hydrocarbon Resin C9 HPE120P-D is an aromatic, low molecular weight thermoplastic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide solubility, water resistance, insulation, l...展开 Hydrocarbon Resin C9 HPE120P-D is an aromatic, low molecular weight thermoplastic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide solubility, water resistance, insulation, low heat conduction, and chemical stability in adhesives, paints, and inks. It has a softening point of 110-140°C and is soluble in coal tars, esters, and turpentine oil. 收起 | |
| Hydrocarbon Resin C9 HPE120PL | Resin Chemicals Co., Ltd. | Hydrocarbon Resin C9 HPE120PL is a low molecular weight thermoplastic aromatic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide good solubility, water resistance, insulation,...展开 Hydrocarbon Resin C9 HPE120PL is a low molecular weight thermoplastic aromatic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide good solubility, water resistance, insulation, low heat conduction, and chemical stability in adhesives, paints, and inks. It has a softening point of 115-125°C and is soluble in coal tars, esters, and turpentine oil. 收起 | |
| Hydrogenated Hydrocarbon Resin C5 HPE100H | Resin Chemicals Co., Ltd. | Hydrogenated Hydrocarbon Resin C5 HPE100H is a hydrogenated hydrocarbon resin designed to provide light color, heat resistance, anti-oxidant properties, and bonding strength. This product is slight yellow transparent flakes or beads in appearance and is c...展开 Hydrogenated Hydrocarbon Resin C5 HPE100H is a hydrogenated hydrocarbon resin designed to provide light color, heat resistance, anti-oxidant properties, and bonding strength. This product is slight yellow transparent flakes or beads in appearance and is commonly used in the manufacturing of hot melt adhesives, pressure sensitive adhesives, and glue. 收起 | |
| Hydrogenated Hydrocarbon Resin C9 HFM-100 | Resin Chemicals Co., Ltd. | Hydrogenated Hydrocarbon Resin C9 HFM-100 is a water-white hydrogenated hydrocarbon resin designed to provide light color, low melt-viscosity, narrow molecular weight distribution, and excellent thermal stability. This product is commonly used in the manu...展开 Hydrogenated Hydrocarbon Resin C9 HFM-100 is a water-white hydrogenated hydrocarbon resin designed to provide light color, low melt-viscosity, narrow molecular weight distribution, and excellent thermal stability. This product is commonly used in the manufacturing of hot melt adhesives and solvent-based pressure sensitive adhesives. 收起 | |
| Hydrogenated Rosin Ester | Resin Chemicals Co., Ltd. | Hydrogenated Rosin Ester HGE100 is a glycerol ester of hydrogenated rosin. This product is commonly used in applications such as screen protection film, diaper adhesive, pressure sensitive adhesive, and hot melt adhesives. It can provide super light color...展开 Hydrogenated Rosin Ester HGE100 is a glycerol ester of hydrogenated rosin. This product is commonly used in applications such as screen protection film, diaper adhesive, pressure sensitive adhesive, and hot melt adhesives. It can provide super light color, low odor, good heat stability, and excellent aging resistance. 收起 | |
| Hydrogenated Rosin-A | Resin Chemicals Co., Ltd. | Hydrogenated Rosin-A is a raw material that is commonly used in the manufacturing of adhesives, inks, and coatings. This product is transparent in appearance with a maximum abietic acid content of 2.0% and a softening point of 76°C. | |
| Hydrogenated Rosin-B | Resin Chemicals Co., Ltd. | Hydrogenated Rosin-B is a raw material that is commonly used in the manufacturing of adhesives, inks, and coatings. This product is transparent in appearance with a maximum abietic acid content of 2.0% and a softening point of 76°C. | |
| Hydrogenated Rosin-C | Resin Chemicals Co., Ltd. | Hydrogenated Rosin-C is a raw material that is commonly used in the manufacturing of adhesives, inks, and coatings. This product is transparent in appearance with a maximum abietic acid content of 2.0% and a softening point of 76°C. | |
| Hydrogenated Rosin-D | Resin Chemicals Co., Ltd. | Hydrogenated Rosin-D is a raw material that is commonly used in the manufacturing of adhesives, inks, and coatings. This product is transparent in appearance with a maximum abietic acid content of 2.0% and a softening point of 76°C. | |
| Iron Orthophosphate | BassTech International | Iron Orthophosphate is a white phosphate of iron and is non-toxic to pets and wildlife. This product is used in paint, coatings, and inks. Iron Orthophosphate has a very small particle size, which leads to improved absorption. | |
| Liquid Rosin Ester LRE-1 | Resin Chemicals Co., Ltd. | Liquid Rosin Ester LRE-1 is a liquid rosin resin created from gum rosin through esterification with polyol. This product is commonly used in applications such as solvent-based PSA, adhesive tapes, and glue. | |
| Methyl Ethyl Ketone | BassTech International | Methyl Ethyl Ketone is an organic compound that is a colorless liquid with a sharp, sweet odor reminiscent of butterscotch and acetone. This product is most commonly used as an industrial solvent, but may also be used in paint, coatings, and inks. | |
| Polyethylene Wax | BassTech International | Polyethylene Wax is a thermoplastic polymer which has a white appearance. This product is product has a variety of applications including paint, coatings, and inks, and is available in HDPE and LDPE forms. | |
| Polymerized Rosin | Resin Chemicals Co., Ltd. | Polymerized Rosin is a modified product consisting of gum rosin and abietic type acids. This product is used to provide a high softening point, oxidation resistance, and high viscosity in organic solvents. It is commonly used in inks, oil paints, adhesive...展开 Polymerized Rosin is a modified product consisting of gum rosin and abietic type acids. This product is used to provide a high softening point, oxidation resistance, and high viscosity in organic solvents. It is commonly used in inks, oil paints, adhesives, and emulsifying agents. It is a transparent solid in appearance with a softening point of 140-165°C. 收起 | |
| Propylene Carbonate | Linyi Lixing Chemical Co., Ltd. | Propylene Carbonate is a clear transparent liquid. This product finds application as an additive in paint strippers and as a setting agent in chemical grouting to control gel time. | |
| Quartz Sand | BassTech International | Quartz Sand is specially designed to add functionality and durability while decreasing the use of expensive resins. This product is used in paint, coatings, and inks, and works well with binders and other additives. | |
| Refined Fatty Acid | Zouping Tianxing Chemical Industry Co., Ltd. | Refined Fatty Acid, in the form of a clear liquid, is a high-quality raw material that can be used in coatings and printing inks. Its iodine value lies between 50 and 60, and it contains between 210 and 225 mg of potassium hydroxide per gram. | |
| Refined Glycerine | Zouping Tianxing Chemical Industry Co., Ltd. | Refined Glycerine, in the form of a transparent liquid without suspended precipitates, is a raw material that can be used in paints, textiles, printing and dyeing. This product's density is greater than 1.2481 g/ml and it contains no more than 0.05% ash. | |
| Refined Gum Rosin | Resin Chemicals Co., Ltd. | Refined Gum Rosin is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a light colored, transparent solid in appearance with a softening point of 76°C. This product is used to provide special chemical act...展开 Refined Gum Rosin is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a light colored, transparent solid in appearance with a softening point of 76°C. This product is used to provide special chemical activity in the production of coatings, inks, and rosin ester resins. 收起 | |
| Refined Rosin Modified Resin GE-85L | Resin Chemicals Co., Ltd. | Refined Rosin Modified Resin GE-85L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 85-88°C. This product is comm...展开 Refined Rosin Modified Resin GE-85L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 85-88°C. This product is commonly used in the production and manufacturing of hot melt adhesives, pressure sensitive adhesives, and high class glues. 收起 | |
| Refined Rosin Modified Resin GE-90L | Resin Chemicals Co., Ltd. | Refined Rosin Modified Resin GE-90L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 87-93°C. This product is comm...展开 Refined Rosin Modified Resin GE-90L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 87-93°C. This product is commonly used in the production and manufacturing of hot melt adhesives, pressure sensitive adhesives, and high class glues. 收起 | |
| Refined Rosin Modified Resin PE-100L | Resin Chemicals Co., Ltd. | Refined Rosin Modified Resin PE-100L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 97-103°C. This product is co...展开 Refined Rosin Modified Resin PE-100L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 97-103°C. This product is commonly used in the production and manufacturing of hot melt adhesives, pressure sensitive adhesives, and high class glues. 收起 | |
| Refined Rosin Modified Resin PE-105L | Resin Chemicals Co., Ltd. | Refined Rosin Modified Resin PE-105L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 102-108°C. This product is c...展开 Refined Rosin Modified Resin PE-105L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 102-108°C. This product is commonly used in the production and manufacturing of hot melt adhesives, pressure sensitive adhesives, and high class glues. 收起 | |
| Refined Rosin Modified Resin PE-95L | Resin Chemicals Co., Ltd. | Refined Rosin Modified Resin PE-95L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 92-98°C. This product is comm...展开 Refined Rosin Modified Resin PE-95L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 92-98°C. This product is commonly used in the production and manufacturing of hot melt adhesives, pressure sensitive adhesives, and high class glues. 收起 | |
| Rosin Modified Maleic Resin MR-130 | Resin Chemicals Co., Ltd. | Rosin Modified Maleic Resin MR-130 is a raw material that is esterified by the addition of gum rosin, maleic anhydride, glycerol or pentaerythritol. It is transparent to pale yellow flakes in appearance with a Gardner grade color of 3-4. This product is u...展开 Rosin Modified Maleic Resin MR-130 is a raw material that is esterified by the addition of gum rosin, maleic anhydride, glycerol or pentaerythritol. It is transparent to pale yellow flakes in appearance with a Gardner grade color of 3-4. This product is used to provide light color production and retention in nitrocellulose lacquers and inks. 收起 | |
| Rosin Modified Maleic Resin MR-130D | Resin Chemicals Co., Ltd. | Rosin Modified Maleic Resin MR-130D is a raw material that is esterified by the addition of gum rosin, maleic anhydride, glycerol or pentaerythritol. It is transparent to pale yellow flakes in appearance with a Gardner grade color of 5-8. This product is ...展开 Rosin Modified Maleic Resin MR-130D is a raw material that is esterified by the addition of gum rosin, maleic anhydride, glycerol or pentaerythritol. It is transparent to pale yellow flakes in appearance with a Gardner grade color of 5-8. This product is used to provide light color production and retention in nitrocellulose lacquers and inks. 收起 | |
| Rosin Modified Maleic Resin MR115R | Resin Chemicals Co., Ltd. | Rosin Modified Maleic Resin MR115R is a solid adduct of gum rosin and maleic anhydride created through the esterification of glycerol. It is pale, yellow solid flakes in appearance with a softening point of 112-117°C. This product is commonly used to prov...展开 Rosin Modified Maleic Resin MR115R is a solid adduct of gum rosin and maleic anhydride created through the esterification of glycerol. It is pale, yellow solid flakes in appearance with a softening point of 112-117°C. This product is commonly used to provide resistance to abrasion, crocking, and crushing while providing leveling and fast drying in traffic marking paints. 收起 | |
| Rosin Modified Maleic Resin MR120R | Resin Chemicals Co., Ltd. | Rosin Modified Maleic Resin MR120R is a solid adduct of gum rosin and maleic anhydride created through the esterification of glycerol. It is pale, yellow solid flakes in appearance with a softening point of 117-123°C. This product is commonly used to prov...展开 Rosin Modified Maleic Resin MR120R is a solid adduct of gum rosin and maleic anhydride created through the esterification of glycerol. It is pale, yellow solid flakes in appearance with a softening point of 117-123°C. This product is commonly used to provide resistance to abrasion, crocking, and crushing while providing leveling and fast drying in traffic marking paints. 收起 | |
| Rosin Modified Maleic Resin MR125R | Resin Chemicals Co., Ltd. | Rosin Modified Maleic Resin MR125R is a solid adduct of gum rosin and maleic anhydride created through the esterification of glycerol. It is pale, yellow solid flakes in appearance with a softening point of 122-128°C. This product is commonly used to prov...展开 Rosin Modified Maleic Resin MR125R is a solid adduct of gum rosin and maleic anhydride created through the esterification of glycerol. It is pale, yellow solid flakes in appearance with a softening point of 122-128°C. This product is commonly used to provide resistance to abrasion, crocking, and crushing while providing leveling and fast drying in traffic marking paints. 收起 | |
| Rosin Modified Phenolic Resin PI116 | Resin Chemicals Co., Ltd. | Rosin Modified Phenolic Resin PI116 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 1500-2200 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展开 Rosin Modified Phenolic Resin PI116 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 1500-2200 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起 | |
| Rosin Modified Phenolic Resin PI118 | Resin Chemicals Co., Ltd. | Rosin Modified Phenolic Resin PI118 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 2000-2800 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展开 Rosin Modified Phenolic Resin PI118 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 2000-2800 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起 |
