| 2-Methylimidazole | Hangzhou Right Chemical Co., Ltd. | 2-Methylimidazole has the chemical structure of C4H6N2. This product appears as white or light yellow granules. It can be used as a curing accelerator for powder coating applications. | |
| Barium Chloride | BassTech International | Barium Chloride is the ionic chemical compound with the formula BaCL2 and is one of the most important water-soluble barium salts. This product has a variety of uses such as in the manufacturing of heat treatment salts, case hardening of steel, in the man...展开 Barium Chloride is the ionic chemical compound with the formula BaCL2 and is one of the most important water-soluble barium salts. This product has a variety of uses such as in the manufacturing of heat treatment salts, case hardening of steel, in the manufacture of pigments, oil lubricants, PVC stabilizers and in the manufacture of other barium salts, such as Barium Sulfate, Barium Chromate and Barium Fluoride. 收起 | |
| Bismuth Octoate | Hangzhou Right Chemical Co., Ltd. | Bismuth Octoate is otherwise known as bismuth tris(2-ethylhexanoate). This product appears as a clear, pale yellow liquid. It can be used in one- and two-component polyurethane systems, e.g., automotive refinish coatings, industrial coatings, or coil co...展开 Bismuth Octoate is otherwise known as bismuth tris(2-ethylhexanoate). This product appears as a clear, pale yellow liquid. It can be used in one- and two-component polyurethane systems, e.g., automotive refinish coatings, industrial coatings, or coil coatings formulated with blocked isocyanates. 收起 | |
| Blanc Fixe | BassTech International | Blanc Fixe is water and organic solven insoluble and appears as color-neutral due to its low refractive index. This product is used as a component of white pigment, as a transparent filler that prevents flocculation of colored pigments, or to modify consi...展开 Blanc Fixe is water and organic solven insoluble and appears as color-neutral due to its low refractive index. This product is used as a component of white pigment, as a transparent filler that prevents flocculation of colored pigments, or to modify consistency, depending on the application and grade. 收起 | |
| BTPPBR | Hangzhou Right Chemical Co., Ltd. | BTPPBR, or butyltriphenylphosphonium bromide, is a phase transfer catalyst. This product appears as off-white to white crystals. It can be used as a catalyst in the production of powder coatings. It can also be used as a catalyst for the production of ...展开 BTPPBR, or butyltriphenylphosphonium bromide, is a phase transfer catalyst. This product appears as off-white to white crystals. It can be used as a catalyst in the production of powder coatings. It can also be used as a catalyst for the production of polyester resins used in powder coatings. 收起 | |
| Catalyst RC32-18A | Hangzhou Right Chemical Co., Ltd. | Catalyst RC32-18A is a powdered catalyst. This product appears as a free-flowing white powder. It can be used in polyester resin-based powder coating formulations in combination with cross-linker RC1174. Catalyst RC32-18A will provide a "wrinkled" text...展开 Catalyst RC32-18A is a powdered catalyst. This product appears as a free-flowing white powder. It can be used in polyester resin-based powder coating formulations in combination with cross-linker RC1174. Catalyst RC32-18A will provide a "wrinkled" texture and is designed to affect the pre-cure rheology and the cross-linking reaction of RC1174. 收起 | |
| Celofiber® CF200W | Celotech Chemical Co., Ltd. | Celofiber® CF200W是在自然状态下存留的不溶于水的纤维素。纤维素纤维是一种用于建筑化工产品中的粉状或纤维状的纤维素添加剂。其结构纤维胶行为在膏剂和填充化合物中的抗流挂效果方面有出众的影响力。它可以在实质上改善绿色稳定性，因此可以在单一步骤中完成厚或薄层的应用，同时使其在垂直表面滑动。其三维纤维骨架提供更少的收缩，有助于防止在干燥过程中形成裂纹。Celofiber® CF200W可以延长储存期，从内到外的液体迁移可以抑制膜的形成。这款产品的纤维长度为200um。 | |
| Celofiber® CF300W | Celotech Chemical Co., Ltd. | Celofiber® CF300W是在自然状态下存留的不溶于水的纤维素。纤维素纤维是一种用于建筑化工产品中的粉状或纤维状的纤维素添加剂。其结构纤维胶行为在膏剂和填充化合物中的抗流挂效果方面有出众的影响力。它可以在实质上改善绿色稳定性，因此可以在单一步骤中完成厚或薄层的应用，同时使其在垂直表面滑动。其三维纤维骨架提供更少的收缩，有助于防止在干燥过程中形成裂纹。Celofiber® CF300W可以延长储存期，从内到外的液体迁移可以抑制膜的形成。这款产品的纤维长度为300um。 | |
| Celofiber® CF450G | Celotech Chemical Co., Ltd. | Celofiber® CF450G是一种白色粉末状或纤维状的，广泛应用于建筑行业的天然纤维素添加物。 Celofiber® CF450G取材于天然纤维素，通过特殊的制造工艺加工生产。Celofiber® CF450G木质纤维在自然状态下不溶于水。Celofiber® CF450G的胶粘功能提升了抹灰和填缝剂的抗垂挂性，并大幅度提高了稳定性，因此无论涂 层是厚是薄，都能快速施工，不会从垂直面滑下。 Celofiber® CF450G的三维网状结构能减少收缩，防止干燥过程中产生龟裂。Celofiber® CF...展开 Celofiber® CF450G是一种白色粉末状或纤维状的，广泛应用于建筑行业的天然纤维素添加物。 Celofiber® CF450G取材于天然纤维素，通过特殊的制造工艺加工生产。Celofiber® CF450G木质纤维在自然状态下不溶于水。Celofiber® CF450G的胶粘功能提升了抹灰和填缝剂的抗垂挂性，并大幅度提高了稳定性，因此无论涂 层是厚是薄，都能快速施工，不会从垂直面滑下。 Celofiber® CF450G的三维网状结构能减少收缩，防止干燥过程中产生龟裂。Celofiber® CF450G可延长产品的储存期，从里到外的液态移动可防止薄膜产生。这款产品的纤维长度为450um。 收起 | |
| Celofiber® CF450W | Celotech Chemical Co., Ltd. | Celofiber® CF450W是在自然状态下存留的不溶于水的纤维素。纤维素纤维是一种用于建筑化工产品中的粉状或纤维状的纤维素添加剂。其结构纤维胶行为在膏剂和填充化合物中的抗流挂效果方面有出众的影响力。它可以在实质上改善绿色稳定性，因此可以在单一步骤中完成厚或薄层的应用，同时使其在垂直表面滑动。其三维纤维骨架提供更少的收缩，有助于防止在干燥过程中形成裂纹。Celofiber® CF450W可以延长储存期，从内到外的液体迁移可以抑制膜的形成。这款产品的纤维长度为450um。 | |
| Celofiber® CF500W | Celotech Chemical Co., Ltd. | Celofiber® CF500W是在自然状态下存留的不溶于水的纤维素。纤维素纤维是一种用于建筑化工产品中的粉状或纤维状的纤维素添加剂。其结构纤维胶行为在膏剂和填充化合物中的抗流挂效果方面有出众的影响力。它可以在实质上改善绿色稳定性，因此可以在单一步骤中完成厚或薄层的应用，同时使其在垂直表面滑动。其三维纤维骨架提供更少的收缩，有助于防止在干燥过程中形成裂纹。Celofiber® CF500W可以延长储存期，从内到外的液体迁移可以抑制膜的形成。这款产品的纤维长度为500um。 | |
| Celofiber® CF60W | Celotech Chemical Co., Ltd. | Celofiber® CF60W是一款自然状态不溶于水的纤维素。纤维素纤维是一种用于建筑化工产品中的粉状或纤维状的纤维素添加剂。其结构纤维胶行为在膏剂和填充化合物中的抗流挂效果方面有出众的影响力。它可以在实质上改善绿色稳定性，因此可以在单一步骤中完成厚或薄层的应用，同时使其在垂直表面滑动。其三维纤维骨架提供更少的收缩，有助于防止在干燥过程中形成裂纹。Celofiber® CF60W可以延长储存期，从内到外的液体迁移可以抑制膜的形成。这款产品的纤维长度为60um。 | |
| Celofiber® CF800W | Celotech Chemical Co., Ltd. | Celofiber® CF800W是在自然状态下存留的不溶于水的纤维素。纤维素纤维是一种用于建筑化工产品中的粉状或纤维状的纤维素添加剂。其结构纤维胶行为在膏剂和填充化合物中的抗流挂效果方面有出众的影响力。它可以在实质上改善绿色稳定性，因此可以在单一步骤中完成厚或薄层的应用，同时使其在垂直表面滑动。其三维纤维骨架提供更少的收缩，有助于防止在干燥过程中形成裂纹。Celofiber® CF800W可以延长储存期，从内到外的液体迁移可以抑制膜的形成。这款产品的纤维长度为800um。 | |
| Celopro® CS160 | Celotech Chemical Co., Ltd. | Celopro® C (CMC)系列羧甲基纤维素是一种多样化的水溶性凝胶,其特性为众多工业应用提供均衡性性能。CMC属于多功能水状胶质，通过其运作方式为配方提供良好的性能。 | |
| Celopro® CS170 | Celotech Chemical Co., Ltd. | Celopro® C (CMC)系列羧甲基纤维素是一种多样化的水溶性凝胶,其特性为众多工业应用提供均衡性性能。CMC属于多功能水状胶质，通过其运作方式为配方提供良好的性能。 | |
| Celopro® CS180 | Celotech Chemical Co., Ltd. | Celopro® C (CMC)系列羧甲基纤维素是一种多样化的水溶性凝胶,其特性为众多工业应用提供均衡性性能。CMC属于多功能水状胶质，通过其运作方式为配方提供良好的性能。 | |
| Celopro® HHB15S | Celotech Chemical Co., Ltd. | Celopro®HHB15S是具有中等粘度的羟乙基纤维素（HEC）。它是非离子型的水溶性物质，可以在乳胶漆，个人护理产品和家用清洁产品等水性体系中用作增稠剂。 | |
| Celopro® HHB30S | Celotech Chemical Co., Ltd. | Celopro® HHB30S is a medium high viscosity type of Hydroxyethyl cellulose (HEC). It is a non-ionic, water-soluble material which can be applied as a thickener for water-borne systems including latex paints, interior and exterior coating, household cleanin...展开 Celopro® HHB30S is a medium high viscosity type of Hydroxyethyl cellulose (HEC). It is a non-ionic, water-soluble material which can be applied as a thickener for water-borne systems including latex paints, interior and exterior coating, household cleaning products and so on, which provides water retention, binding power, protective colloid, biostable, etc. for systems. 收起 | |
| Celopro® HHB50S | Celotech Chemical Co., Ltd. | Celopro®HHB50S是一种具有延迟溶解度的高粘度羟乙基纤维素（HEC）。它是非离子型水溶性材料，可以在乳胶漆，个人护理产品和家用清洁产品等水性体系中用作增稠剂。 | |
| Celopro® HHB60S | Celotech Chemical Co., Ltd. | Celopro® HHB60S是一种具有延迟溶解度的高粘度羟乙基纤维素（HEC）。它是非离子型水溶性材料，可以在乳胶漆，个人护理产品和家用清洁产品等水性体系中用作增稠剂。 | |
| Celopro® HHB70S | Celotech Chemical Co., Ltd. | Celopro® HHB70S is an extremely high viscosity Hydroxyethyl cellulose (HEC). It is water-soluble material which can be applied as a thickener for water-borne systems including latex paints, interior and exterior coating and so on. | |
| Celopro® ME10M P | Celotech Chemical Co., Ltd. | Celopro® ME10M P is a Hydroxypropyl Methylcellulose powder with high etherification. It helps to efficiently thicken and provide water retention in formulations such as tile adhesives, cement-based trowelling compounds, gypsum-based jointing compounds, ex...展开 Celopro® ME10M P is a Hydroxypropyl Methylcellulose powder with high etherification. It helps to efficiently thicken and provide water retention in formulations such as tile adhesives, cement-based trowelling compounds, gypsum-based jointing compounds, exterior insulating finishing systems, and more. 收起 | |
| Celopro® ME20M P | Celotech Chemical Co., Ltd. | Celopro® ME20M P is a Hydroxypropyl Methylcellulose powder with high etherification. It helps to efficiently thicken and provide water retention in formulations such as tile adhesives, cement-based trowelling compounds, gypsum-based jointing compounds, ex...展开 Celopro® ME20M P is a Hydroxypropyl Methylcellulose powder with high etherification. It helps to efficiently thicken and provide water retention in formulations such as tile adhesives, cement-based trowelling compounds, gypsum-based jointing compounds, exterior insulating finishing systems, and more. 收起 | |
| Celopro® ME30M P | Celotech Chemical Co., Ltd. | Celopro® ME30M P is a Hydroxypropyl Methylcellulose powder with high etherification. It helps to efficiently thicken and provide water retention in formulations such as tile adhesives, cement-lime plasters, cement-based skim coats, gypsum-based thin layer...展开 Celopro® ME30M P is a Hydroxypropyl Methylcellulose powder with high etherification. It helps to efficiently thicken and provide water retention in formulations such as tile adhesives, cement-lime plasters, cement-based skim coats, gypsum-based thin layer plasters, cement-based trowlling compounds, and gypsum-lime-plaster. 收起 | |
| Celopro® ME40M P | Celotech Chemical Co., Ltd. | Celopro® ME40M P is a Hydroxypropyl Methylcellulose powder with high etherification. It helps to efficiently thicken and provide water retention in formulations such as tile adhesives, cement-lime plasters, cement-based skim coats, gypsum-based thin layer...展开 Celopro® ME40M P is a Hydroxypropyl Methylcellulose powder with high etherification. It helps to efficiently thicken and provide water retention in formulations such as tile adhesives, cement-lime plasters, cement-based skim coats, gypsum-based thin layer plasters, cement-based trowlling compounds, and gypsum-lime-plaster. 收起 | |
| Celopro® ME4M P | Celotech Chemical Co., Ltd. | Celopro® ME4M P is a Hydroxypropyl Methylcellulose powder with high etherification. It helps to efficiently thicken and provide water retention in formulations such as cement based grouts and repair mortars. | |
| Celopro® ME50M P | Celotech Chemical Co., Ltd. | Celopro® ME50M P is a Hydroxypropyl Methylcellulose powder with high etherification. It helps to efficiently thicken and provide water retention in formulations such as tile adhesives, cement-based skim coats, gypsum-based thin layer plasters, cement-base...展开 Celopro® ME50M P is a Hydroxypropyl Methylcellulose powder with high etherification. It helps to efficiently thicken and provide water retention in formulations such as tile adhesives, cement-based skim coats, gypsum-based thin layer plasters, cement-based trowlling compounds, gypsum-based machine applied plasters, and decorative renders. 收起 | |
| Celopro® ME60M P | Celotech Chemical Co., Ltd. | Celopro® ME60M P is a Hydroxypropyl Methylcellulose powder with high etherification. It helps to efficiently thicken and provide water retention in formulations such as tile adhesives, gypsum-lime-plasters, and gypsum-based plasters, thin layer plasters, ...展开 Celopro® ME60M P is a Hydroxypropyl Methylcellulose powder with high etherification. It helps to efficiently thicken and provide water retention in formulations such as tile adhesives, gypsum-lime-plasters, and gypsum-based plasters, thin layer plasters, and machine applied plasters. 收起 | |
| Celopro® ME6M P | Celotech Chemical Co., Ltd. | Celopro® ME6M P is a Hydroxypropyl Methylcellulose powder with high etherification. It helps to efficiently thicken and provide water retention in formulations such as gypsum- and cement-based plasters, mineral-based decorative renders, and gypsum-based j...展开 Celopro® ME6M P is a Hydroxypropyl Methylcellulose powder with high etherification. It helps to efficiently thicken and provide water retention in formulations such as gypsum- and cement-based plasters, mineral-based decorative renders, and gypsum-based jointing compounds. 收起 | |
| Celopro® ME70M P | Celotech Chemical Co., Ltd. | Celopro® ME70M P is a Hydroxypropyl Methylcellulose powder with high etherification. It helps to efficiently thicken and provide water retention in formulations such as cement-based plasters and tile adhesives, gypsum-based plasters, joint fillers, and th...展开 Celopro® ME70M P is a Hydroxypropyl Methylcellulose powder with high etherification. It helps to efficiently thicken and provide water retention in formulations such as cement-based plasters and tile adhesives, gypsum-based plasters, joint fillers, and thin layer plasters. 收起 | |
| Celopro® MH15M P | Celotech Chemical Co., Ltd. | Celopro® MH15M P是一种中等粘度的羟乙基甲基纤维素（HEMC），提供多种与其它甲基纤维素衍生物相似的优势，如有效的增稠性以及具有保水能力。Celopro®MH品牌下的产品是高效的添加剂，用于改善建筑材料的质量和加工特性，包括石膏和粉刷，灰泥，瓷砖黏合剂，密封剂，以及乳胶漆。 | |
| Celopro® MH40MP | Celotech Chemical Co., Ltd. | Celopro® MH40M P is a high viscosity type of Hydroxyethyl methylcellulose (HEMC) which provides many of the same benefits as other methylcellulose derivatives, such as the ability to efficiently thicken and provide water retention. These products, offered...展开 Celopro® MH40M P is a high viscosity type of Hydroxyethyl methylcellulose (HEMC) which provides many of the same benefits as other methylcellulose derivatives, such as the ability to efficiently thicken and provide water retention. These products, offered under the CELOPRO™ MH brand, are highly effective additives used to improve the quality and processing characteristics of building materials such as plasters and renders, mortars, tile adhesives, joint compounds and emulsion paints. 收起 | |
| Celopro® MH55M FP | Celotech Chemical Co., Ltd. | Celopro® MH55M FP is a very high viscosity type of Hydroxyethyl methylcellulose (HEMC) with fine particle size. It provides many of the same benefits as other methylcellulose derivatives, such as the ability to efficiently thicken and provide water retent...展开 Celopro® MH55M FP is a very high viscosity type of Hydroxyethyl methylcellulose (HEMC) with fine particle size. It provides many of the same benefits as other methylcellulose derivatives, such as the ability to efficiently thicken and provide water retention. This product has been applied in tile adhesives, skim coats, thin layer plasters, gypsum based trowelling compounds, machine applied plasters, and decorative renders. 收起 | |
| Celopro® MH70M FP | Celotech Chemical Co., Ltd. | Celopro® MH70M FP is a extremely high viscosity type of Hydroxyethyl methylcellulose (HEMC) which provides many of the same benefits as other methylcellulose derivatives, such as the ability to efficiently thicken and provide water retention. It can be ap...展开 Celopro® MH70M FP is a extremely high viscosity type of Hydroxyethyl methylcellulose (HEMC) which provides many of the same benefits as other methylcellulose derivatives, such as the ability to efficiently thicken and provide water retention. It can be applied in gypsum and cement based plasters, joint fillers, machine-applied plasters, tile adhesives, gypsum-lime-plasters, thin layer plasters, and gypsum based plasters. 收起 | |
| Celopro® MK20M FP | Celotech Chemical Co., Ltd. | Celopro® MK20M FP是一种非改性低粘度羟丙基甲基纤维素（HPMC），提供多种与其它甲基纤维素衍生物相似的优势，如有效的增稠性以及具有保水能力。Celopro®非改性型提供对干粉砂浆的灵活性和易于配方性。 | |
| Celopro® MK30M FP | Celotech Chemical Co., Ltd. | Celopro® MK30M FP是一种非改性高粘度羟丙基甲基纤维素（HPMC），提供多种与其它甲基纤维素衍生物相似的优势，如有效的增稠性以及具有保水能力。Celopro®非改性型提供对干粉砂浆的灵活性和易于配方性。它可以用作瓷砖黏合剂，粉灰层，修平材料等应用的粘稠剂。 | |
| Celopro® MK400 P | Celotech Chemical Co., Ltd. | Celopro® MK400 P是低粘度型羟丙基甲基纤维素（HPMC）。它是专为作为自流平化合物而开发的。 | |
| Celopro® MK40M FP | Celotech Chemical Co., Ltd. | Celopro® MK40M FP is a non modified high viscosity Hydroxypropyl methylcellulose (HPMC) which provides many of the same benefits as other methylcellulose derivatives, such as the ability to efficiently thicken and provide water retention. Celopro® non-mod...展开 Celopro® MK40M FP is a non modified high viscosity Hydroxypropyl methylcellulose (HPMC) which provides many of the same benefits as other methylcellulose derivatives, such as the ability to efficiently thicken and provide water retention. Celopro® non-modified type offers flexibility to dry mortar companies for easy formulation. It can be applied as thickener in tile adhesives, cement-lime-plasters, skim coats, plasters, machine applied plasters, joint fillers and thermal insulation systems. 收起 | |
| Celopro® MK60M FP | Celotech Chemical Co., Ltd. | Celopro® MK60M FP是一种具有极高粘度的羟丙基甲基纤维素（HPMC），提供多种与其它甲基纤维素衍生物相似的优势，如有效的增稠性以及具有保水能力。 | |
| Celopro® MK70M FP | Celotech Chemical Co., Ltd. | Celopro® MK70M FP is a extremely high viscosity type of Hydroxypropyl methylcellulose (HPMC), which provides many of the same benefits as other methylcellulose derivatives, such as the ability to efficiently thicken and provide water retention. It can be ...展开 Celopro® MK70M FP is a extremely high viscosity type of Hydroxypropyl methylcellulose (HPMC), which provides many of the same benefits as other methylcellulose derivatives, such as the ability to efficiently thicken and provide water retention. It can be applied in plaster, joint filler, tile adhesive, gypsum-lime-plasters, thin layer plasters etc. 收起 | |
| Celopro® MK70MS FP | Celotech Chemical Co., Ltd. | Celopro® MK70MS FP是一种有表面处理效果，并具有极高粘度的羟丙基甲基纤维素（HPMC）。它提供多种与其它甲基纤维素衍生物相似的优势，如有效的增稠性，并提供保水能力。这款产品可以在石膏、接缝填料，花砖胶黏剂，石灰泥和薄层石灰中应用。 | |
| Cerium Octoate | Hangzhou Right Chemical Co., Ltd. | Cerium Octoate is otherwise known as cerium tri(2-ethylhexanoate). This product appears as a clear, yellow liquid. It can be used as a drier for printing inks and coatings. | |
| Cobalt Octoate | Hangzhou Right Chemical Co., Ltd. | Cobalt Octoate is otherwise known as Cobalt bis (2-ethylhexanoate). This product appears as a purplish liquid. It can be used as a drier in paints and varnishes. It can also be used as a drier in inks, resins, and lacquers. | |
| Copper Octoate | Hangzhou Right Chemical Co., Ltd. | Copper Octoate is otherwise known as copper 2-ethylhexanoate. This product appears as a clear, green liquid. It can be used as an anti-fouling agent, bactericide and as a catalyst in marine paints. It can also be used in casting resins, surfacers and c...展开 Copper Octoate is otherwise known as copper 2-ethylhexanoate. This product appears as a clear, green liquid. It can be used as an anti-fouling agent, bactericide and as a catalyst in marine paints. It can also be used in casting resins, surfacers and coatings in unsaturated polyesters. 收起 | |
| Cross-Linking Agent RC1174 | Hangzhou Right Chemical Co., Ltd. | Cross-Linking Agent RC1174 appears as white crystals. This product can be formulated with amine-blocked sulfonic acid salts, in order to obtain durable wrinkle finishes. It is designed for use in powder coatings, and will provide weatherability and good...展开 Cross-Linking Agent RC1174 appears as white crystals. This product can be formulated with amine-blocked sulfonic acid salts, in order to obtain durable wrinkle finishes. It is designed for use in powder coatings, and will provide weatherability and good exterior properties. 收起 | |
| Cross-Linking Agent RC4030 | Hangzhou Right Chemical Co., Ltd. | Cross-Linking Agent RC4030 is a polyurethane adduct to be used in combination with different hydroxyl functional resins. This product appears as pale granules. It can be used in coatings in order to provide weather resistance, good flow properties, good...展开 Cross-Linking Agent RC4030 is a polyurethane adduct to be used in combination with different hydroxyl functional resins. This product appears as pale granules. It can be used in coatings in order to provide weather resistance, good flow properties, good storage stability and good mechanical properties. The end product will have a glossy surface. 收起 | |
| Curing Accelerator RC3126 | Hangzhou Right Chemical Co., Ltd. | Curing Accelerator RC3126 is a master batch with 8% active substances. This product appears as a white, granular solid. It can be used in epoxy/carboxy and epoxy/anhydride reaction functional polyester powder coatings, in order to reduce the curing tem...展开 Curing Accelerator RC3126 is a master batch with 8% active substances. This product appears as a white, granular solid. It can be used in epoxy/carboxy and epoxy/anhydride reaction functional polyester powder coatings, in order to reduce the curing temperature and accelerate the curing speed. It can also reduce curing temperatures in polyester/TGIC systems. 收起 | |
| Dorkafill® H | BassTech International | Dorkafill® H is a functional filler in paint, coatings, and inks. This product brings matting properties and viscosity alongside basic performance (brightness, opacity, hardness, etc) and often allows an increase of the pigment volume concentration (PVC) ...展开 Dorkafill® H is a functional filler in paint, coatings, and inks. This product brings matting properties and viscosity alongside basic performance (brightness, opacity, hardness, etc) and often allows an increase of the pigment volume concentration (PVC) without a loss of quality. 收起 | |
| Dorkafill® Pro_Void | BassTech International | Dorkafill® Pro_Void is a functional filler in paint, coatings, and inks. This product provides matting properties and scrub resistance which result in lower oil absorption (and thus a reduction in resin, advantages in dispersion, viscosity and more flexib...展开 Dorkafill® Pro_Void is a functional filler in paint, coatings, and inks. This product provides matting properties and scrub resistance which result in lower oil absorption (and thus a reduction in resin, advantages in dispersion, viscosity and more flexibility in fine tuning of the paint e.g. open time). 收起 | |
| ETPPBR | Hangzhou Right Chemical Co., Ltd. | ETPPBR, or ethyltriphenylphosphonium bromide, is a phase transfer catalyst. This product appears as off-white to white crystals. It can be used as a catalyst in the production of powder coatings. It can also be used as a catalyst in the production of ...展开 ETPPBR, or ethyltriphenylphosphonium bromide, is a phase transfer catalyst. This product appears as off-white to white crystals. It can be used as a catalyst in the production of powder coatings. It can also be used as a catalyst in the production of polyester resins for powder coatings. 收起 | |
| Fabutit 734 | BassTech International | Fabutit 734 is a modified STPP (Sodium Tripolyphosphate) which acts as a deflocculant in paint, coatings, and inks. This product is three times more effective than standard STPP and is water soluble. | |
| HAA Hardener RC552 | Hangzhou Right Chemical Co., Ltd. | HAA Hardener RC552 is a tetra-functional group containing β-hydroxyalkylamide. This product appears as a white powder. It is designed to be a substitute for TGIC and can be used to provide exterior-durable powder coatings free from TGIC. | |
| HAA Hardener RC559 | Hangzhou Right Chemical Co., Ltd. | HAA Hardener RC559 is a hydroxyalkyl amide hardener. This product appears as a white granular solid. It can be used to cure carboxyl-functional polyester for powder coating applications. | |
| Hardener RC-31 | Hangzhou Right Chemical Co., Ltd. | Hardener RC-31 is an epoxy resin having the chemical structure of a cyclic amidine. This product appears as a white or light yellow powder or flake. It can be used in epoxy powder coatings and to modify surface gloss. It can also be used as an accelera...展开 Hardener RC-31 is an epoxy resin having the chemical structure of a cyclic amidine. This product appears as a white or light yellow powder or flake. It can be used in epoxy powder coatings and to modify surface gloss. It can also be used as an accelerator for dicyandiamide and epoxy polyester powder coatings. 收起 | |
| Hardener RC2844 | Hangzhou Right Chemical Co., Ltd. | Hardener RC2844 is either substituted or modified dicyandiamide. This product appears as an off-white powder. It can be used in high gloss pure epoxy powder coatings. It can also be an ingredient in electro-insulation coatings and anti-corrosion coatin...展开 Hardener RC2844 is either substituted or modified dicyandiamide. This product appears as an off-white powder. It can be used in high gloss pure epoxy powder coatings. It can also be an ingredient in electro-insulation coatings and anti-corrosion coatings. 收起 | |
| HESS NCS-10 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-10 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-10 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-12 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-12 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-12 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-15 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-15 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-15 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-3 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-3 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-3 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-5 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-5 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-5 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-8 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-8 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-8 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| Horsorb 292 | SUNNY CHEMICAL CO.,LTD. | Horsorb 292 comes in a slightly yellowish liquid and is a hindered amine light stabilizer that displays high compatibility with a variety of polymers, gives a high synergistic effect with UV absorbers and also shows good solubility in most industrial solv...展开 Horsorb 292 comes in a slightly yellowish liquid and is a hindered amine light stabilizer that displays high compatibility with a variety of polymers, gives a high synergistic effect with UV absorbers and also shows good solubility in most industrial solvents. Also known as UV-292, it is particularly recommended for use in coatings. 收起 | |
| Iron Orthophosphate | BassTech International | Iron Orthophosphate is a white phosphate of iron and is non-toxic to pets and wildlife. This product is used in paint, coatings, and inks. Iron Orthophosphate has a very small particle size, which leads to improved absorption. | |
| K-CURE® 1040 | King Industries, Inc. | K-CURE® 1040 is a solution of para-Toluenesulfonic acid (p-TSA) in isoproanol, featuring high gloss, excellent weathering characteristics, outstanding exterior durability, and fast curing properties. Common applications include can, paper, and wood coatin...展开 K-CURE® 1040 is a solution of para-Toluenesulfonic acid (p-TSA) in isoproanol, featuring high gloss, excellent weathering characteristics, outstanding exterior durability, and fast curing properties. Common applications include can, paper, and wood coatings, appliance finishes, and printing inks. 收起 | |
| K-CURE® 1040W | King Industries, Inc. | K-CURE® 1040W is a good quality para-Toluenesulfonic acid (p-TSA) stimulant that is dissolved in water. Some advantages of this product include fast curing ability, good weather ability, it is non-flammable, high gloss, and it is integraded into water sys...展开 K-CURE® 1040W is a good quality para-Toluenesulfonic acid (p-TSA) stimulant that is dissolved in water. Some advantages of this product include fast curing ability, good weather ability, it is non-flammable, high gloss, and it is integraded into water systems. It is soluble in water, alcohol, and also glycols. This product can be applied to water based wood coatings, paper coatings, and printing inks. 收起 | |
| K-CURE® 129B | King Industries, Inc. | K-CURE® 129B is a strong acid stimulant supplied at 50% in a blend of alcohols. It is a strong acid stimulant that is made to give fast cures with good pot life in two component acid curing lacquers. K-CURE® 129B is not recommended to be used on metal sub...展开 K-CURE® 129B is a strong acid stimulant supplied at 50% in a blend of alcohols. It is a strong acid stimulant that is made to give fast cures with good pot life in two component acid curing lacquers. K-CURE® 129B is not recommended to be used on metal substrates because of its corrosive nature. This product offer fast curing, and high acid value which allows lower does levels. This is a product that is soluble in water, alcohol, and glycols. It can be applied to wood, paper, and plastic coatings. 收起 | |
| K-FLEX® 148 | King Industries, Inc. | K-FLEX® 148 is a highly reactive, aliphatic polyester polyol which is suggested for melamine or isocyanate crosslinked sealants, adhesives, inks, elastomers, and coatings for better flexibility, higher gloss, and improved flow out. It has a lower viscosit...展开 K-FLEX® 148 is a highly reactive, aliphatic polyester polyol which is suggested for melamine or isocyanate crosslinked sealants, adhesives, inks, elastomers, and coatings for better flexibility, higher gloss, and improved flow out. It has a lower viscosity to form higher solid content with good hardness and expanded flexibility. It appears as a clear, light straw liquid, offers good flow and leveling along with being 100% active. K-FLEX® 148 is soluble in ketones, alcohols, esters, Aromatic 100, Aromatic 150, and xylene. It is partially soluble in mineral spirits and is insoluble in water. It is normally applied in office furniture coatings, automotive primers, coil coatings, overprint varnishes, and general industrials. 收起 | |
| K-FLEX® 171-90 | King Industries, Inc. | K-FLEX® 171-90 is a highly reactive, aliphatic polyester polyol that is suggested for aminoplast or isocyanate crosslinked coatings, sealants, inks, elastomers, and adhesives. Although it is slower reacting in isocyanate crosslinked systems, it offers lon...展开 K-FLEX® 171-90 is a highly reactive, aliphatic polyester polyol that is suggested for aminoplast or isocyanate crosslinked coatings, sealants, inks, elastomers, and adhesives. Although it is slower reacting in isocyanate crosslinked systems, it offers long pot life, enhanced adhesion and flexibility. Because of its lower hydroxyl number, K-FLEX® 171-90 requires less crosslinker. K-FLEX® 171-90 can also be used as a modifier of aminoplast crosslinked coatings, inks and adhesives to enhance flexibility and adhesion. It appears as a clear, light straw liquid and offers high resistivity and low temperature cure. This product is soluble in esters, ketones, alcohols, aromatic 100 and aromatic 150, and xylene. It is partially soluble in mineral spirits and is insoluble in water. It can be used in office furniture coatings, 2K urethane coatings, appliance coatings, elastomeric coatings, coil coatings, and epoxy flexibilizer. 收起 | |
| K-FLEX® 188 | King Industries, Inc. | K-FLEX® 188 is a highly reactive, aliphatic polyester polyol which is suggested for aminoplast or isocyanate crosslinked coatings, adhesives, sealants, elastomers, and inks. Its uniform, narrow molecular weight distribution and unique chemical structure p...展开 K-FLEX® 188 is a highly reactive, aliphatic polyester polyol which is suggested for aminoplast or isocyanate crosslinked coatings, adhesives, sealants, elastomers, and inks. Its uniform, narrow molecular weight distribution and unique chemical structure produce exceptional and consistent performance and broad compatibility. K-FLEX® 188's primary hydroxyl groups also produce reactivity with epoxies in cationic thermal cure systems. This product is 100% active and offers, good flexibility, adhesion to plastics, and high resistivity. It appears as a clear, light straw liquid and is soluble in the aerospace, automotive refinish, and marine maintenance industries along with plastic substrates, overprint varnishes, glass laminates, and optical coatings. 收起 | |
| K-FLEX® 7301 | King Industries, Inc. | K-FLEX® 7301 is a reactive diluent with low viscosity and good compatibility with a variety of resins. It can be crosslinked with amino resins, polyisocyanates, polyamides, polyamines, unsaturated polymers, and is based on acetoacetate functionality. It i...展开 K-FLEX® 7301 is a reactive diluent with low viscosity and good compatibility with a variety of resins. It can be crosslinked with amino resins, polyisocyanates, polyamides, polyamines, unsaturated polymers, and is based on acetoacetate functionality. It is effective for both high solids and water-based applications for enhancing adhesion and corrosion resistance. This product appears as a clear amber liquid, terminates solvent popping/pinholes, and reduces induction time in epoxy/polyamide coatings. It is soluble in alcohols, ketones, esters, and aliphatic and aromatic hydrocarbons. It can be used in 2 component epoxy/ polyamide coatings, isocyanate crosslined coatings, and UV cure and oxidizing polymerization. 收起 | |
| K-FLEX® A307 | King Industries, Inc. | K-FLEX® A307 is a low viscosity, 100% solids linear, saturated, aliphatic polyester diol with primary hydroxyl groups. This product was created as a flexibility modifier for acrylic/isocyanate and acrylic/melamine systems. The low hydroxyl number minimize...展开 K-FLEX® A307 is a low viscosity, 100% solids linear, saturated, aliphatic polyester diol with primary hydroxyl groups. This product was created as a flexibility modifier for acrylic/isocyanate and acrylic/melamine systems. The low hydroxyl number minimizes the crosslinker demand. It offers improved flexibility, light color, abrasion resistance, good balance of surface dry and pot life in 2K PU, and no acid functionality. It appears as a clear viscous liquid and is soluble in esters, alcohols, xylene, ketones, aromatic 100, and aromatic 150. It is partially soluble in mineral spirits and is insoluble in water. It can be applied in automotive refinish, automotive OEM, industrial maintenance, aerospace, and plastic coatings. 收起 | |
| K-FLEX® A308 | King Industries, Inc. | K-FLEX® A308 is a 100% active linear, saturated, low viscosity, aliphatic polyester diol with essential hydroxyl groups. This product was created as a flexibility modifier for acrylic/isocyanate and acrylic/melamine systems. The low viscosity mixed togeth...展开 K-FLEX® A308 is a 100% active linear, saturated, low viscosity, aliphatic polyester diol with essential hydroxyl groups. This product was created as a flexibility modifier for acrylic/isocyanate and acrylic/melamine systems. The low viscosity mixed together with higher hydroxyl number gives good adhesion and hardness with lower VOC levels. K-FLEX® A308 appears as a offers enhanced flexibility, light color, a balance of surface dry/pot life in 2K PU, no acid functionality, and abrasion resistance. It is soluble in esters, alcohols, Aromatic 100, Aromatic 150, ketones, and xylene. It is partially soluble in mineral spirits and is insoluble in water. It can be applied in automotive refinish, automotive OEM, plastic coatings, industrial maintenance, and aerospace. 收起 | |
| K-FLEX® UD-320 | King Industries, Inc. | K-FLEX® UD-320 is an aliphatic, high solids, low molecular weight urethane diol oligomer. It is soluble in polar organic solvents except aliphatic and aromatic hydrocarbons. To gain aromatic solubility it has to be combined with a hydrogen bonding solvent...展开 K-FLEX® UD-320 is an aliphatic, high solids, low molecular weight urethane diol oligomer. It is soluble in polar organic solvents except aliphatic and aromatic hydrocarbons. To gain aromatic solubility it has to be combined with a hydrogen bonding solvent. This product has broad compatibility with acrylic, polyester, and alkyd resins. K-FLEX® UD-320 enhances the hardness of melamine crosslinked systems. When used to modify a 2-component polyurethane, it will enhance hardness and flexibility. K-FLEX® UD-320 responds best to a zirconium chelate catalyst when used in isocyanate crosslinked systems. It also offers benefits like low VOC, chemical resistance, exterior durability, QUV resistance, and hydrolytic stability. This product can be used for machine/equipment coatings, automotive coatings, appliance coatings, wood and paper coatings, and aerospace coatings. 收起 | |
| K-FLEX® UD-320-100 | King Industries, Inc. | K-FLEX® UD-320-100 is a low molecular weight, aliphatic urethane diol oligomer, supplied at 100% solids. It is suggested to be used as a chemical intermediate for prepolymer synthesis and allows the incorporation of aliphatic urethane groups without the u...展开 K-FLEX® UD-320-100 is a low molecular weight, aliphatic urethane diol oligomer, supplied at 100% solids. It is suggested to be used as a chemical intermediate for prepolymer synthesis and allows the incorporation of aliphatic urethane groups without the use of isocyanates. It appears as a viscous clear liquid and offers a low VOC, enhanced hardness, exterior durability, hydrolytic stability, QUV resistance, and is solvent and isocyanate free. This product is soluble in almost all organic solvents excluding aliphatic and aromatic hydrocarbons. The only was to get aromatic solubility is to combine it with a hydrogen bonding solvent. K-FLEX® UD-320-100 can be applied in industries like paper, automotive, wood, leather, and screen printing ink. 收起 | |
| K-FLEX® UD-350W | King Industries, Inc. | K-FLEX® UD-350W is a water-based solution of an aliphatic, low molecular weight urethane diol oligomer. It is suggested to be used as a modifier for amino crosslinked water soluble, emulsified acrylic, alkyd, urethane, and polyester resins. K-FLEX® UD-350...展开 K-FLEX® UD-350W is a water-based solution of an aliphatic, low molecular weight urethane diol oligomer. It is suggested to be used as a modifier for amino crosslinked water soluble, emulsified acrylic, alkyd, urethane, and polyester resins. K-FLEX® UD-350W can be used as a reactive cosolvent replacement to enhance crosslink density, solids, film/resistance properties, and flow/leveling. It appears as a straw colored liquid and offers low VOC, water solubility, hardness, chemical resistance, hydrolytic stability, QUV resistance, and exterior durability. This is a product that is not soluble in aromatic and aliphatic hydrocarbons. It can used in making, coil coatings, wood coatings, can coatings, dip coatings, appliance coatings, automotive coatings, and overprint varnishes. 收起 | |
| K-FLEX® XM-3307 | King Industries, Inc. | K-FLEX® XM-3307 is a carboxyl and hydroxyl functional polyester-urethane polyol. It is made to be a dispersing resin for pigments that are organic or inorganic.. It has to be neutralized with an amine to give good dispersing qualities. This product appear...展开 K-FLEX® XM-3307 is a carboxyl and hydroxyl functional polyester-urethane polyol. It is made to be a dispersing resin for pigments that are organic or inorganic.. It has to be neutralized with an amine to give good dispersing qualities. This product appears as a viscous liquid and offers fast dispersion time, high pigment loading, and high pigment transparency. It is soluble in ketones, alcohols, esters, aromatic hydrocarbons, and is not soluble in aliphatic hydrocarbons. It can be soluble in water if it is neutralized with an organic amine. K-FLEX® XM-3307 can also be applied in water-based coatings, solvent-based coatings, and can be used as an intercoat adhesion promoter. 收起 | |
| K-FLEX® XM-332 | King Industries, Inc. | K-FLEX® XM-332 is a low viscosity polyester polyol modifier resin that provides enhanced flexibility in solvent-borne, high solids, and solventless systems. It is recommended for use in air dry/force dry 2-component polyurethanes and blocked isocyanate sy...展开 K-FLEX® XM-332 is a low viscosity polyester polyol modifier resin that provides enhanced flexibility in solvent-borne, high solids, and solventless systems. It is recommended for use in air dry/force dry 2-component polyurethanes and blocked isocyanate systems. It appears as a light colored liquid, is 100% active, and offers good flexibility and hydrolytic stability. This product is soluble in aromatics and polar organic solvents like ketones, alcohols, glycols, esters, and glycol ethers. Two things that it is not soluble in are aliphatics and water. K-FLEX® XM-332 can be applied in structural adhesives, thermoplastic urethanes, plastic coatings, cast elastomer prepolymers, and automotive topcoats and OEM coatings. 收起 | |
| K-FLEX® XM-337 | King Industries, Inc. | K-FLEX® XM-337 is an aliphatic saturated polyester diol modifier resin created to implement increased toughness and chemical resistance for solvent borne and high solids systems. It is recommended for use in 1 and 2 component polyurethanes, and blocked is...展开 K-FLEX® XM-337 is an aliphatic saturated polyester diol modifier resin created to implement increased toughness and chemical resistance for solvent borne and high solids systems. It is recommended for use in 1 and 2 component polyurethanes, and blocked isocyanate systems. This product offers low color, UV durability, high hardness, high impact resistance, abrasion resistance and overall increased toughness. It appears as a clear liquid and is soluble in a lot of polar organic solvents such as glycols, alcohols, esters, ketones, aromatics, glycol ethers, and is not soluble in water and aliphatics. 收起 | |
| K-FLEX® XM-359 | King Industries, Inc. | K-FLEX® XM-359 is created to provide long pot life in 2K polyurethanes and to avoid yellowing resulting from interaction with benzotriazole (BZT) UV absorbers in clearcoat systems. K-FLEX® XM-359 is a saturated, aliphatic resin modifier. It provides a goo...展开 K-FLEX® XM-359 is created to provide long pot life in 2K polyurethanes and to avoid yellowing resulting from interaction with benzotriazole (BZT) UV absorbers in clearcoat systems. K-FLEX® XM-359 is a saturated, aliphatic resin modifier. It provides a good balance of flexibility with hardness, good exterior durability plus great solubility in many different solvents including exempt solvents. It appears as a clear, light straw liquid and provides optical clarity and low color along with good compatibility. This product is soluble in esters, ketones, alcohols, aromatic 100, aromatic 150, xylene, t-butyl acetate, and Oxsol 100. It is partially soluble in mineral spirits, and insoluble in water. It is applied in plastic coatings, optically clear coatings, elastomers and laminates. 收起 | |
| K-FLEX® XM-360 | King Industries, Inc. | K-FLEX® XM-360 is made to produce long pot life in 2K polyurethanes and to prevent yellowing resulting from interaction with benzotriazole (BZT) UV absorbers. K-FLEX® XM-360 is a saturated, aliphatic resin modifier. It gives a good balance of flexibility ...展开 K-FLEX® XM-360 is made to produce long pot life in 2K polyurethanes and to prevent yellowing resulting from interaction with benzotriazole (BZT) UV absorbers. K-FLEX® XM-360 is a saturated, aliphatic resin modifier. It gives a good balance of flexibility with hardness, excellent exterior durability plus excellent solubility in many different solvents. This product offers good compatibility and solubility, optical clarity and low color, and it is 100% active. It appears as a light straw liquid and is soluble in ketones, aromatics, alcohols, glycols, glycol ethers, esters, and is insoluble in water. It can be applied in the aerospace industry, automotive refinishes, plastic coatings, marine maintenance, and optically clear coatings, elastomers, and laminates. 收起 | |
| K-FLEX® XM-366 | King Industries, Inc. | K-FLEX® XM-366 is a low viscosity, 100% active, saturated, aliphatic polyester diol with primary hydroxyl groups. This product was made for use as a resin modifier of acrylic/isocyanate and acrylic/melamine systems to expand flexibility and decline VOC. I...展开 K-FLEX® XM-366 is a low viscosity, 100% active, saturated, aliphatic polyester diol with primary hydroxyl groups. This product was made for use as a resin modifier of acrylic/isocyanate and acrylic/melamine systems to expand flexibility and decline VOC. It appears as a clear liquid that is light in color and offers good compatibility and solubility. This product is soluble in glycols, glycol ethers, alcohols, esters, aromatics, ketones, and is insoluble in aliphatic hydrocarbons and water. It can be applied in plastic coatings, aerospace, automotive OEM & refinishes, and VOC compliant systems. 收起 | |
| K-FLEX® XM-B301 | King Industries, Inc. | K-FLEX® XM-B301 is a low viscosity, acetoacetate functional reactive diluent that is compatible with variety of resins. It is mainly suggested to be used in epoxy/polyamide primers, but can also be used in systems crosslinked with amino resins or polyisoc...展开 K-FLEX® XM-B301 is a low viscosity, acetoacetate functional reactive diluent that is compatible with variety of resins. It is mainly suggested to be used in epoxy/polyamide primers, but can also be used in systems crosslinked with amino resins or polyisocyanates. This product appears as a clear amber liquid and offers reduced induction time, adhesion, corrosion resistance, viscosity reduction, and elimates solvent popping and pinholes. It is soluble in esters, alcohols, aromatics, and ketones. It is insoluble in aliphatic hydrocarbons and water. K-FLEX® XM-B301 can be applied in epoxy-polyamide primers for industries like aerospace, automotive, marine, truck/bus/rail, and industrial maintenance. 收起 | |
| K-KAT® 348 | King Industries, Inc. | K-KAT® 348 is an adaptable bismuth carboxylate stimulant that is made for blocked isocyanate and two standard urethane coatings. It can provide similar characteristics to basic tin catalysts without the environmental setbacks. This product appears as a cl...展开 K-KAT® 348 is an adaptable bismuth carboxylate stimulant that is made for blocked isocyanate and two standard urethane coatings. It can provide similar characteristics to basic tin catalysts without the environmental setbacks. This product appears as a clear, straw liquid and offers great catalysis of secondary hydroxyls, gloss retention, exterior durability, and the ability to be used in ambient, force dry, and bake systems. It is soluble in glycol ethers, aliphatics, and aromatics. It is limited in solubility in alcohols and esters and is insoluble in water. K-KAT® 348 can be applied in 2K and blocked isocyanate coatings, urethane elastomers, foams and coatings, and cationic coatings. 收起 | |
| K-KAT® 4205 | King Industries, Inc. | K-KAT® 4205 is a zirconium chelate complex that is an effective stimulant for high solids 2-integral urethane coatings. It is effective for ambient and low temperature cure systems. This product appears as a clear, colorless liquid and offers fast tack fr...展开 K-KAT® 4205 is a zirconium chelate complex that is an effective stimulant for high solids 2-integral urethane coatings. It is effective for ambient and low temperature cure systems. This product appears as a clear, colorless liquid and offers fast tack free time along with good viscosity stability. It is effective at low metal concentrations and also effective with a mix of isocyanates and polycols. K-KAT® 4205 is soluble in ketones, aromatic hydrocarbons, and esters. It can be applied to automotive topcoats, maintenance coatings, structural plastics coatings, and aerospace coatings. 收起 | |
| K-KAT® 5218 | King Industries, Inc. | K-KAT® 5218 is an aluminum chelate complex stimulant for 2 basic urethane coatings. It is effective for both ambient cure and baked systems. K-KAT® 5218 is supplied in a reactive diluent for high solids applications. It offers pot life extension with the ...展开 K-KAT® 5218 is an aluminum chelate complex stimulant for 2 basic urethane coatings. It is effective for both ambient cure and baked systems. K-KAT® 5218 is supplied in a reactive diluent for high solids applications. It offers pot life extension with the addition of 2,4-pentanedione, fast tack free time, exterior durability, and is effective with a variety of isocyanates and polyols. It appears as a slightly hazy, amber liquid and can be applied in automotive topcoats, aerospace coatings, maintenance coatings, and coatings for structural plastics. This product is soluble in ketones, esters, glycol ethers, alcohols, and aromatic hydrocarbons. 收起 | |
| K-KAT® 6212 | King Industries, Inc. | K-KAT® 6212 appears as a clear, straw liquid and is an effective stimulant when isocyanate and hydroxyl groups react with each other. It is a zirconium chelate complex dissolved in a reactive diluent. It offers good cure response and exterior durability a...展开 K-KAT® 6212 appears as a clear, straw liquid and is an effective stimulant when isocyanate and hydroxyl groups react with each other. It is a zirconium chelate complex dissolved in a reactive diluent. It offers good cure response and exterior durability along with a short tack free time. This product doesn't add to the hydrolysis of polyester resins and high selectivity for NCO/OH reactions over NCO/water reaction. It is soluble in esters, alcohols, ketones, aliphatic and aromatic hydrocarbons, glycol ethers, and glycol ether acetates. It is only partially soluble in water. It can be applied to adhesives, polyurethane coatings, casting resins and polyurethane resin synthesis, RIM, and water-based two component coatings. 收起 | |
| K-KAT® 670 | King Industries, Inc. | K-KAT® 670 is a novel non-tin stimulant for products containing crosslinkable silane terminated polymers. It appears as a light amber liquid and is soluble in esters, ketones, aromatic hydrocarbons, alcohols, and is insoluble in water. This product can be...展开 K-KAT® 670 is a novel non-tin stimulant for products containing crosslinkable silane terminated polymers. It appears as a light amber liquid and is soluble in esters, ketones, aromatic hydrocarbons, alcohols, and is insoluble in water. This product can be applied in ambient cured 1 component organosilane and 2 component organosilane hybrid coatings, caulks, adhesives, elastomers, and sealants. 收起 | |
| K-KAT® XC-B221 | King Industries, Inc. | K-KAT® XC-B221 is an experimental bismuth carboxylate stimulant that is made for blocked isocyanate and two basic urethane coatings. It is a bismuth stimulant that can contribute similar qualities to standard tin stimulants without the environmental drawb...展开 K-KAT® XC-B221 is an experimental bismuth carboxylate stimulant that is made for blocked isocyanate and two basic urethane coatings. It is a bismuth stimulant that can contribute similar qualities to standard tin stimulants without the environmental drawbacks. This product offers good glass retention, exterior durability, and the ability to be used in ambient, force dry, and bake systems. K-KAT® XC-B221 is soluble in butanol, ethanol, methanol, isopropanol, glycol ethers, glycol ether acetates, aliphatic and aromatic hydrocarbons, and is insoluble in water. This product appears as a clear, straw liquid and can be applied in 2K, blocked isocyanate coatings, urethane elastomers, foams, coatings, and cationic electro-coatings. 收起 | |
| K-KAT® XK-614 | King Industries, Inc. | K-KAT® XK-614 is a non-tin stimulant that is suggested to be applied in 2-component solvent-borne, 2-component waterborne polyurethanes, and also for 1-component blocked isocyanate systems. It is easy to add to the polyol components and offers good curing...展开 K-KAT® XK-614 is a non-tin stimulant that is suggested to be applied in 2-component solvent-borne, 2-component waterborne polyurethanes, and also for 1-component blocked isocyanate systems. It is easy to add to the polyol components and offers good curing time qualities. It also has good hydrolytic stability and exterior durability. This product has non-yellowing ability and great gloss retention characteristics. It appears as a light, yellow liquid, is soluble in alcohols, and is insoluble in water. 收起 | |
| K-KAT® XK-617 | King Industries, Inc. | K-KAT® XK-617 is an effective stimulant when isocyanates and polyols used in the production of cast elastomers react with each other. It is a proprietary blended organometallic complex specifically formulated to be a substitute to mercury stimulant withou...展开 K-KAT® XK-617 is an effective stimulant when isocyanates and polyols used in the production of cast elastomers react with each other. It is a proprietary blended organometallic complex specifically formulated to be a substitute to mercury stimulant without the concern of toxicity. It appears as a pale, light amber liquid, offers good cure response, and is environmentally more acceptable. This product is soluble in glycol ethers, n-butanol, ketones, aliphatics. aromatics, and is partially soluble in water. It is normally applied in 2K urethanes for cast elastomers. 收起 | |
| K-KAT® XK-628 | King Industries, Inc. | K-KAT® XK-628 is an adaptable bismuth carboxylate stimulant that is made for blocked isocyanate and two fundamental urethane coatings. It can provide similar characteristics to basic tin stimulants without the environmental drawbacks. K-KAT® XK-628 appear...展开 K-KAT® XK-628 is an adaptable bismuth carboxylate stimulant that is made for blocked isocyanate and two fundamental urethane coatings. It can provide similar characteristics to basic tin stimulants without the environmental drawbacks. K-KAT® XK-628 appears as a clear, amber liquid and is a made to give enhanced hydrolytic stability. This product offers good exterior ability, gloss retention, and the ability to be used in ambient, force dry, and bake systems. It is soluble in glycol ethers, aliphatics, and aromatics. It is partially soluble in alcohols, esters, and is insoluble in water. This product can be applied in 2K and blocked isocyanate coatings, urethane elastomers, foams, and coatings. 收起 | |
| K-KAT® XK-635 | King Industries, Inc. | K-KAT® XK-635 is a new non-tin stimulant suggested for solvent based or solvent free 2-component polyurethanes and 1-component blocked isocyanate systems. This product appears as a light, yellow liquid and offers good pot life in 2K PU systems, good cure ...展开 K-KAT® XK-635 is a new non-tin stimulant suggested for solvent based or solvent free 2-component polyurethanes and 1-component blocked isocyanate systems. This product appears as a light, yellow liquid and offers good pot life in 2K PU systems, good cure time, non-yellowing, and gloss retention. It is soluble in esters, aromatic hydrocarbons, and ketones. It is insoluble in water. This product is 100% active, weighs 9.5 lbs per gallon, and has a specific gravity of 1.14 g/ml. 收起 | |
| K-KAT® XK-639 | King Industries, Inc. | K-KAT® XK-639 is a new non-tin stimulant suggested for solvent based or solvent free 2-component polyurethanes and 1-component blocked isocyanate systems. This product appears as a light, yellow liquid and offers good pot life in 2K PU systems, good cure ...展开 K-KAT® XK-639 is a new non-tin stimulant suggested for solvent based or solvent free 2-component polyurethanes and 1-component blocked isocyanate systems. This product appears as a light, yellow liquid and offers good pot life in 2K PU systems, good cure time, non-yellowing, and gloss retention. It is soluble in esters, aromatic hydrocarbons, and ketones. It is insoluble in water. This product is 50% active in isopropanol, weighs 7.6 lbs per gallon, and has a specific gravity of 0.91 g/ml. 收起 | |
| K-KAT® XK-640 | King Industries, Inc. | K-KAT® XK-640 is an adaptable bismuth carboxylate stimulant that is made for blocked isocyanate and two component urethane coatings. It offers good exterior durability, good gloss retention, and similar properties to standard tin catalysts without the env...展开 K-KAT® XK-640 is an adaptable bismuth carboxylate stimulant that is made for blocked isocyanate and two component urethane coatings. It offers good exterior durability, good gloss retention, and similar properties to standard tin catalysts without the environmental drawbacks. K-KAT® XK-640 is a designed to provide improved hydrolytic stability compared to other bismuth carboxylate catalysts. This product is soluble in glycol ethers, aliphatics, and aromatics, has partial solubility in alcohols and esters, and is insoluble in water. It appears as a clear, amber liquid, is 18% metal, and can be applied in ambient, force dry and bake systems, 2K and blocked isocyanate coatings, and in the production of urethane coatings. 收起 | |
| K-KAT® XK-651 | King Industries, Inc. | K-KAT® XK-651 is an adaptable bismuth carboxylate stimulant that is made for blocked isocyanate, two component urethanes, and one and two component silane terminated coatings. K-KAT® XK-651 is made to give good hydrolytic stability. This product has good ...展开 K-KAT® XK-651 is an adaptable bismuth carboxylate stimulant that is made for blocked isocyanate, two component urethanes, and one and two component silane terminated coatings. K-KAT® XK-651 is made to give good hydrolytic stability. This product has good gloss retention, exterior durability, can replace tin stimulants, and good solubility. It is soluble in glycol ethers, aliphatics, aromatics, has partial solubility in alcohols and esters, and is not soluble in water. It can be applied in 2K and blocked isocyanate coatings, and in the production of urethane elastomers, foams, and coatings. 收起 | |
| K-PURE® CDI-4301 | King Industries, Inc. | K-PURE® CDI-4301 is a corrosion inhibitor made to be used in electronics applications and appears as a clear amber liquid. This product offers good solubility in water, glycols, and also alcohols. It can be applied in CMP and electronic cleaning solutions...展开 K-PURE® CDI-4301 is a corrosion inhibitor made to be used in electronics applications and appears as a clear amber liquid. This product offers good solubility in water, glycols, and also alcohols. It can be applied in CMP and electronic cleaning solutions and has a density of 0.99 g/ml. 收起 | |
| K-PURE® CDI-4302 | King Industries, Inc. | K-PURE® CDI-4302 is a corrosion inhibitor made to be used in electronics applications and appears as a clear amber liquid. This product offers good solubility in water, glycols, and also alcohols. It can be applied in CMP and electronic cleaning solutions...展开 K-PURE® CDI-4302 is a corrosion inhibitor made to be used in electronics applications and appears as a clear amber liquid. This product offers good solubility in water, glycols, and also alcohols. It can be applied in CMP and electronic cleaning solutions and has a density of 1.15 g/ml. 收起 | |
| K-PURE® CDI-4303 | King Industries, Inc. | K-PURE® CDI-4303 is a 100% active organic liquid corrosion inhibitor that is based on a proprietary amino acid derivative. It appears as a dark amber liquid and is soluble in polar solvents and water. This product can be applied in corrosion inhibiting co...展开 K-PURE® CDI-4303 is a 100% active organic liquid corrosion inhibitor that is based on a proprietary amino acid derivative. It appears as a dark amber liquid and is soluble in polar solvents and water. This product can be applied in corrosion inhibiting coatings, water-based cleaning & polishing formations, and can be used as a flash rust inhibitor for water-based coatings. 收起 | |
| K-PURE® CDI-4308 | King Industries, Inc. | K-PURE® CDI-4308 is a 100% active organic liquid additive that is based on a proprietary heterocyclic amine derivative. K-PURE® CDI-4308 has an affinity for soft metals, which can help with corrosion prevention, adhesion promotion and lubrication. K-PURE®...展开 K-PURE® CDI-4308 is a 100% active organic liquid additive that is based on a proprietary heterocyclic amine derivative. K-PURE® CDI-4308 has an affinity for soft metals, which can help with corrosion prevention, adhesion promotion and lubrication. K-PURE® CDI-4308 was created for solvent based and solventless systems. It appears as a clear amber liquid and offers low viscosity, compatibility with many solvents & resins, and it is a solventless liquid. This product can be used in any application that needs corrosion prevention. 收起 | |
| K-PURE® CDI-4312 | King Industries, Inc. | K-PURE® CDI-4312 is a 100% active organic liquid additive that is made to passivate the corrosion of aluminum, copper, and silver. It is good for protecting different kinds of metals in polar solvents and also water. This product can be applied in cleaner...展开 K-PURE® CDI-4312 is a 100% active organic liquid additive that is made to passivate the corrosion of aluminum, copper, and silver. It is good for protecting different kinds of metals in polar solvents and also water. This product can be applied in cleaners, CMP slurries, strippers, and adhesives & coatings. 收起 |
