MERGAL® V698K5 | Arxada – Troy Corporation | MERGAL® V698K5 is a broad-spectrum wet-state preservative used to avoid deterioration and degradation of aqueous systems caused by bacteria, fungi and yeast. | |
MERGAL® V698K6 | Arxada – Troy Corporation | MERGAL® V698K6 is a broad-spectrum wet-state preservative used to avoid deterioration and degradation of aqueous systems caused by bacteria, fungi and yeast . | |
MERGAL® WP45 | Arxada – Troy Corporation | MERGAL® WP45 is an effective preservative against a wide variety of fungal orgamisms (yeast, molt, staining fungi and mildew) and also contributes to limited control of bacteria. The primary application is protection of surface exposed to fungal spores, i...展开 MERGAL® WP45 is an effective preservative against a wide variety of fungal orgamisms (yeast, molt, staining fungi and mildew) and also contributes to limited control of bacteria. The primary application is protection of surface exposed to fungal spores, in water- or solvent- based produts. MERGAL® WP45 can be used to protect against fungal growth on technical materials in both interior and exterior applcations. 收起 | |
Methyl Ethyl Ketone | BassTech International | Methyl Ethyl Ketone is an organic compound that is a colorless liquid with a sharp, sweet odor reminiscent of butterscotch and acetone. This product is most commonly used as an industrial solvent, but may also be used in paint, coatings, and inks. | |
Nuosept® 44 | Arxada – Troy Corporation | Nuosept® 44 is derived from glycine. It is fast acting, easy to use and handle, and cost competitive. | |
NUOSEPT® 491 | Arxada – Troy Corporation | NUOSEPT® 491 is a formaldehyde-free, pH-stable liquid preservative designed to inhibit the growth of bacteria in aquoeous systems. The product ig highly stabe and compatiblewith most water-based systems. | |
NUOSEPT® 95 | Arxada – Troy Corporation | NUOSEPT® 95 is an aqueous solution of organic compounds designed for use as a preservative in water-based products. | |
NUOSEPT® BM11 | Arxada – Troy Corporation | NUOSEPT® BM11 is a broad-spectrum wet-state preservative used to prevent deterioration and degradation of aqueous systems caused by bacteria, fungi and yeast. NUOSEPT® BM11 is a highly concentrated, ecologically responsible formulation. NUOSEPT® BM11 is f...展开 NUOSEPT® BM11 is a broad-spectrum wet-state preservative used to prevent deterioration and degradation of aqueous systems caused by bacteria, fungi and yeast. NUOSEPT® BM11 is a highly concentrated, ecologically responsible formulation. NUOSEPT® BM11 is free of formaldehyde, CIT, VOC and AOX. 收起 | |
NUOSEPT® BM21 | Arxada – Troy Corporation | NUOSEPT® BM21 is a broad-spectrum wet-state preservative used to prevent deterioration and degradation of aqueous systems caused by bacteria, fungi and yeast. NUOSEPT® BM21 is a highly concentrated, ecologically responsible formulation. NUOSEPT® BM21 is f...展开 NUOSEPT® BM21 is a broad-spectrum wet-state preservative used to prevent deterioration and degradation of aqueous systems caused by bacteria, fungi and yeast. NUOSEPT® BM21 is a highly concentrated, ecologically responsible formulation. NUOSEPT® BM21 is free of formaldehyde, CIT, VOC and AOX. 收起 | |
NUOSEPT® BM22 | Arxada – Troy Corporation | NUOSEPT® BM22 is a broad-spectrum wet-state preservative used to prevent deterioration and degradation of aqueous systems caused by bacteria, fungi and yeast. NUOSEPT® BM22 is a highly concentrated, ecologically responsible formulation. NUOSEPT® BM22 is f...展开 NUOSEPT® BM22 is a broad-spectrum wet-state preservative used to prevent deterioration and degradation of aqueous systems caused by bacteria, fungi and yeast. NUOSEPT® BM22 is a highly concentrated, ecologically responsible formulation. NUOSEPT® BM22 is free of formaldehyde, CIT, VOC and AOX. 收起 | |
NUOSEPT® BM22A | Arxada – Troy Corporation | NUOSEPT® BM22A is a broad-spectrum wet-state preservative used to prevent deterioration and degradation of aqueous systems caused by bacteria, fungi and yeast. NUOSEPT® BM22A is a highly concentrated, ecologically responsible formulation. NUOSEPT® BM22A i...展开 NUOSEPT® BM22A is a broad-spectrum wet-state preservative used to prevent deterioration and degradation of aqueous systems caused by bacteria, fungi and yeast. NUOSEPT® BM22A is a highly concentrated, ecologically responsible formulation. NUOSEPT® BM22A is free of formaldehyde, CIT, VOC and AOX. 收起 | |
NUOSEPT® M50C | Arxada – Troy Corporation | NUOSEPT® M50C is a broad-spectrum wet-state preservative used to prevent deterioration and degradation of aqueous systems caused by bacteria. NUOSEPT® M50C is a highly concentrated, ecologically responsible formulation. NUOSEPT® M50C is free of formaldehy...展开 NUOSEPT® M50C is a broad-spectrum wet-state preservative used to prevent deterioration and degradation of aqueous systems caused by bacteria. NUOSEPT® M50C is a highly concentrated, ecologically responsible formulation. NUOSEPT® M50C is free of formaldehyde, CIT, VOC and AOX 收起 | |
NUOSEPT® MIT10 | Arxada – Troy Corporation | NUOSEPT® MIT10 is a broad-spectrum wet-state preservative used to prevent deterioration and degradation of aqueous systems caused by bacteria. NUOSEPT® MIT10 is a highly concentrated, ecologically responsible formulation. NUOSEPT® MIT10 is free of formald...展开 NUOSEPT® MIT10 is a broad-spectrum wet-state preservative used to prevent deterioration and degradation of aqueous systems caused by bacteria. NUOSEPT® MIT10 is a highly concentrated, ecologically responsible formulation. NUOSEPT® MIT10 is free of formaldehyde, CIT, VOC and AOX 收起 | |
Pigment Orange 62 | Anshan Hifichem Co., Ltd. 鞍山七彩化学股份有限公司 | Pigment Orange 62 is a pigment with the C.I.# of 11775 and has a bright orange hue. It has applications in printing inks, coatings, and industrial coatings. | |
Polyethylene Wax | BassTech International | Polyethylene Wax is a thermoplastic polymer which has a white appearance. This product is product has a variety of applications including paint, coatings, and inks, and is available in HDPE and LDPE forms. | |
Polymerized Rosin | Resin Chemicals Co., Ltd. | Polymerized Rosin is a modified product consisting of gum rosin and abietic type acids. This product is used to provide a high softening point, oxidation resistance, and high viscosity in organic solvents. It is commonly used in inks, oil paints, adhesive...展开 Polymerized Rosin is a modified product consisting of gum rosin and abietic type acids. This product is used to provide a high softening point, oxidation resistance, and high viscosity in organic solvents. It is commonly used in inks, oil paints, adhesives, and emulsifying agents. It is a transparent solid in appearance with a softening point of 140-165°C. 收起 | |
POLYPHASE® 2167 | Arxada – Troy Corporation | POLYPHASE® 2167 is a water-based, zero-VOC preservative designed to protect coated surfaces against a wide variety of microorganisms. POLYPHASE® 2167 is especially effective against the growth of mold, staining fungi and yeast, and also imprts antibacteri...展开 POLYPHASE® 2167 is a water-based, zero-VOC preservative designed to protect coated surfaces against a wide variety of microorganisms. POLYPHASE® 2167 is especially effective against the growth of mold, staining fungi and yeast, and also imprts antibacterial properties to the coating. 收起 | |
POLYPHASE® 2175 | Arxada – Troy Corporation | POLYPHASE® 2175 is a water-based dry-film preservative designed to protect interior coated surface against microbial growth. POLYPHASE® 2175 is a free-flowing, wter based suspension concentrate with no VOC contribution. | |
POLYPHASE® 641 | Arxada – Troy Corporation | POLYPHASE® 641 is a liquid fungicide concentrate developed to provide enhanced chemical stability in alkyd systems. It is effective against a wide variety of fungal organisms. This product is based on the active ingredient IPBC. | |
POLYPHASE® 663 | Arxada – Troy Corporation | POLYPHASE® 663 is one of Troy's advanced broad-spectrum preservatives for water-based coating and other materials. The product offers superior protection against a wide variety of micro-organism such as algae, fungi, surface mold, staining fungi and milde...展开 POLYPHASE® 663 is one of Troy's advanced broad-spectrum preservatives for water-based coating and other materials. The product offers superior protection against a wide variety of micro-organism such as algae, fungi, surface mold, staining fungi and mildew. Due to a high concentration of actives, the product is very cost-effective and offers long-term efficacy. 收起 | |
POLYPHASE® 678 | Arxada – Troy Corporation | 杀生物剂的水分散体,可以有效抵抗各种类型的真菌生物。其主要应用领域是水性产品,包括对VOC要求严格的领域。 | |
POLYPHASE® 689 | Arxada – Troy Corporation | POLYPHASE® 689 is a broad-spectrum, water-based film preservative that is effective against a wide vaiety of damaging microorganisms. The perservative is particularly useful in water-based outdoor products in which Volatile Organic Compounds (VOCs) are a...展开 POLYPHASE® 689 is a broad-spectrum, water-based film preservative that is effective against a wide vaiety of damaging microorganisms. The perservative is particularly useful in water-based outdoor products in which Volatile Organic Compounds (VOCs) are a major comcern. POLYPHASE® 689 provides long-lasting protection against both algae & fungi. It is particularly effective for application over cementitious substrates. 收起 | |
POLYPHASE® 7026 | Arxada – Troy Corporation | POLYPHASE® 7026 is an efficient film preservative against a wide variety of fungal organisms (mold and staining fungi). Its primary application is in water based products. This product can be used to protect against fungal growth in interior and exterior ...展开 POLYPHASE® 7026 is an efficient film preservative against a wide variety of fungal organisms (mold and staining fungi). Its primary application is in water based products. This product can be used to protect against fungal growth in interior and exterior applications. POLYPHASE® 7026 offers excellent fungal dry-film protection to interior and exterior paints, masonry coatings, stucco, pigment dispersion and water based pigmented wood stains. 收起 | |
POLYPHASE® 7029 | Arxada – Troy Corporation | POLYPHASE® 7029 is a concentrated broad-spectrum dry-film preservative for solvent-based coatings, wood preservatives, stains and other materials, developed to provide enhanceed chemical stability in the presence of driers, raw oils and pigment. | |
Polyphase® 763CR | Arxada – Troy Corporation | Polyphase® 763CR is a broad-spectrum, water-based product that is effective against a wide variety of fungal and algal organisms where controlled release of active ingredients is beneficial. This product is particularly useful in water-based products in w...展开 Polyphase® 763CR is a broad-spectrum, water-based product that is effective against a wide variety of fungal and algal organisms where controlled release of active ingredients is beneficial. This product is particularly useful in water-based products in which Volatile Organic Compounds (VOCs) are a major concern and more than fungal protection is desired. Polyphase® 763CR is particularly effective for applications over cementitious substrates. 收起 | |
POLYPHASE® 8089 | Arxada – Troy Corporation | POLYPHASE® 8089 is a concentrated broad-spectrum dry film preservative for water-based products. It is a VOC-free preservative effective against a wide variety of algal and fungal organisms, including mold, staining, and mildew. | |
POLYPHASE® 926 | Arxada – Troy Corporation | POLYPHASE® 926 is one of Troy's advanced broad-spectrum preservatives for water-based coating and other materials. Due to a high concentration of actives, the product is very cost-effective and offers long-term efficacy. | |
POLYPHASE® 963 | Arxada – Troy Corporation | POLYPHASE® 963 is one of Troy's advanced broad-spectrum preservatives for water-based coating and other materials. The product offers superior protection against a wide variety of micro-organism such as algae, fungi, surface mold, staining fungi and milde...展开 POLYPHASE® 963 is one of Troy's advanced broad-spectrum preservatives for water-based coating and other materials. The product offers superior protection against a wide variety of micro-organism such as algae, fungi, surface mold, staining fungi and mildew. Due to a high concentration of actives, the product is very cost-effective and offers long-term efficacy. 收起 | |
POLYPHASE® 978 | Arxada – Troy Corporation | POLYPHASE® 978 is a broad-spectrum fungistat effective against a wide variety of fungal organisms and is developed to provide efficacy in solvent-based formulations. It offers excellent dry-film fungal protection in interior and exterior paints and stains...展开 POLYPHASE® 978 is a broad-spectrum fungistat effective against a wide variety of fungal organisms and is developed to provide efficacy in solvent-based formulations. It offers excellent dry-film fungal protection in interior and exterior paints and stains and wood protective stains. POLYPHASE® 978 also provides excellent fungal control in adhesives, caulks, grout sealants, and joint cements. 收起 | |
POLYPHASE® AF1 | Arxada – Troy Corporation | 一种广谱型非金属杀真菌剂,能够广泛地杀灭各种真菌。 | |
POLYPHASE® AF3 | Arxada – Troy Corporation | POLYPHASE® AF3 is a broad spectrum, non-metallic fungicide solution which is effective against a wide variety of fungal organisms. Is suited for waterborne and solvent-based applications. Offers excellent dry film fungal protection in interior and exterio...展开 POLYPHASE® AF3 is a broad spectrum, non-metallic fungicide solution which is effective against a wide variety of fungal organisms. Is suited for waterborne and solvent-based applications. Offers excellent dry film fungal protection in interior and exterior paints, coatings, and wood protective stains. Also provides superior fungal control in wood preservation as well as preventing mildew growth in adhesives, caulks, sealants, textile applications, metal working fluids, ink systems, and other industrial applications. This product is based on the active ingredient IPBC. 收起 | |
POLYPHASE® EC17 | Arxada – Troy Corporation | POLYPHASE® EC17 is an emulsifiable concentration which may be used in aqueous systems, such as metalworking fluids, latex emulsions for textiles, millwork, sapstain and similar products where fungicidal protection is necessary. Is a neutral concentrate, w...展开 POLYPHASE® EC17 is an emulsifiable concentration which may be used in aqueous systems, such as metalworking fluids, latex emulsions for textiles, millwork, sapstain and similar products where fungicidal protection is necessary. Is a neutral concentrate, which is easily incorporated, and provides uniform IPBC distribution in these products. Is effective against mold, mildew and staining and rot fungi, emulsifiable concentrate, and dispersible and compatible in aqueous systems. This product is based on the active ingredient IPBC. 收起 | |
POLYPHASE® P100 | Arxada – Troy Corporation | POLYPHASE® P100 is a wide spectrum, non-metallic fungicide which is effective against a wide variety of fungal organisms. It may be used to protect both interior and exterior coatings from the growth of fungal organisms on the film surface as well as a fu...展开 POLYPHASE® P100 is a wide spectrum, non-metallic fungicide which is effective against a wide variety of fungal organisms. It may be used to protect both interior and exterior coatings from the growth of fungal organisms on the film surface as well as a fungicide for cutting oils, textiles, paper coatings, inks, plastics, adhesives, and canvas and cordage. Is also used for wood preservation and wood protection in above ground applications. This product is based on the active ingredient IPBC. 收起 | |
POLYPHASE® P20T | Arxada – Troy Corporation | Polyphase P20T is a water-dispersible liquid preservative for preventing the growth of mildew and rot in the dry film of aqueous and solvent-based adhesives, polymer coatings and SBR latex emulsions for carpet backing. This product is based on the active ...展开 Polyphase P20T is a water-dispersible liquid preservative for preventing the growth of mildew and rot in the dry film of aqueous and solvent-based adhesives, polymer coatings and SBR latex emulsions for carpet backing. This product is based on the active ingredient IPBC. 收起 | |
POLYPHASE® PW20CR | Arxada – Troy Corporation | POLYPHASE® PW20CR is a 20% dispersion of 3-iodo-2-propynyl butyl carbamate (IPBC) in a controlled release format. The product is specifically designed to significantly reduce the leaching of IPBC due to exposure of the finished product to water. | |
POLYPHASE® PW30 | Arxada – Troy Corporation | POLYPHASE® PW30 is a high-efficacy dry-film preservative for anti-fungal protection in a wide range of technical materials. It is a free-flowing, VOC-free dispersion product for aqueous systems. | |
POLYPHASE® PW40 | Arxada – Troy Corporation | POLYPHASE® PW40 is a free-flowing, VOC-free dispersion effective against a wide variety of fungal organisms (mold, staining and mildew). The primary application is in water-based products, especially those in which VOC is a major concern. This product is ...展开 POLYPHASE® PW40 is a free-flowing, VOC-free dispersion effective against a wide variety of fungal organisms (mold, staining and mildew). The primary application is in water-based products, especially those in which VOC is a major concern. This product is based on the active ingredient IPBC. 收起 | |
POLYPHASE® PW56 | Arxada – Troy Corporation | POLYPHASE® PW56 is a high-efficacy dry-film preservative for anti-fungal protection in a wide range of technical materials. It is a free-flowing, VOC-free dispersion product for aqueous systems. | |
POLYPHASE® S99 | Arxada – Troy Corporation | POLYPHASE® S99 is a water dispersion of biocides effective against fungal and algal organisms. It is useful for the protection of various systems for applications such as paints, coatings, stuccos, wood protective stains, caulks, sealants, and other indus...展开 POLYPHASE® S99 is a water dispersion of biocides effective against fungal and algal organisms. It is useful for the protection of various systems for applications such as paints, coatings, stuccos, wood protective stains, caulks, sealants, and other industrial applications. 收起 | |
POLYPHASE® S99PLUS | Arxada – Troy Corporation | POLYPHASE® S99PLUS is a broad-spectrum, water-based dry-film preservative that is effective against a wide variety of damaging microorganisms. This preservative is particularly useful in water-based outdoor products in which Volatile Organic Compounds (VO...展开 POLYPHASE® S99PLUS is a broad-spectrum, water-based dry-film preservative that is effective against a wide variety of damaging microorganisms. This preservative is particularly useful in water-based outdoor products in which Volatile Organic Compounds (VOCs) are a major concern. POLYPHASE® S99PLUS provides long-lasting protection against both algae & fungi. It is particularly effective for application over cementitious substrates. 收起 | |
PROXEL® AQ | Arxada – Troy Corporation | PROXEL® AQ is a broad-spectrum biocide for the preservation of industrial water-based products against spoilage from micro-organisms. PROXEL® AQ is an aqueous solution of 1,2-benzisothiazolin-3-one (BIT) that is pH and temperature stable. | |
PROXEL® BC | Arxada – Troy Corporation | PROXEL® BC is effective in preserving industrial products against spoilage caused by bacteria, yeasts, and mold. | |
PROXEL® BD20 | Arxada – Troy Corporation | PROXEL® BD20 is a broad-spectrum biocide for the preservation of industrial water-based products against spoilage from micro-organisms. | |
PROXEL® BZ | Arxada – Troy Corporation | PROXEL® BZ is a dual-active, broad-spectrum biocide for the wet-state preservation of industrial water-based products. | |
PROXEL® BZ PLUS | Arxada – Troy Corporation | PROXEL® BZ PLUS is a dual-active, broad-spectrum biocide for the wet-state preservation of industrial materials used in building products. | |
PROXEL® CMC-E | Arxada – Troy Corporation | PROXEL® CMC-E is an aqueous solution of 5-chloro-2-methyl-4-isothiaolin-3-one (CMIT) and 2-methyl-4-isothiazolin-3-one (MIT), and is effective for the wet-state preservation of industrial water-based products against spoilage caused by bacteria. | |
PROXEL® GXL | Arxada – Troy Corporation | PROXEL® GXL is a broad-spectrum biocide for the preservation of industrial water-based products against spoilage from micro-organisms. | |
PROXEL® LS | Arxada – Troy Corporation | PROXEL® LS is a dual-active, broad-spectrum biocide for the wet-state preservation of industrial water-based products. | |
PROXEL® TN | Arxada – Troy Corporation | PROXEL® TN is effective in preserving industrial products against spoilage caused by bacteria, yeasts, and mold. | |
Quartz Sand | BassTech International | Quartz Sand is specially designed to add functionality and durability while decreasing the use of expensive resins. This product is used in paint, coatings, and inks, and works well with binders and other additives. | |
Refined Gum Rosin | Resin Chemicals Co., Ltd. | Refined Gum Rosin is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a light colored, transparent solid in appearance with a softening point of 76°C. This product is used to provide special chemical act...展开 Refined Gum Rosin is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a light colored, transparent solid in appearance with a softening point of 76°C. This product is used to provide special chemical activity in the production of coatings, inks, and rosin ester resins. 收起 | |
Refined Rosin Modified Resin GE-85L | Resin Chemicals Co., Ltd. | Refined Rosin Modified Resin GE-85L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 85-88°C. This product is comm...展开 Refined Rosin Modified Resin GE-85L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 85-88°C. This product is commonly used in the production and manufacturing of hot melt adhesives, pressure sensitive adhesives, and high class glues. 收起 | |
Refined Rosin Modified Resin GE-90L | Resin Chemicals Co., Ltd. | Refined Rosin Modified Resin GE-90L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 87-93°C. This product is comm...展开 Refined Rosin Modified Resin GE-90L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 87-93°C. This product is commonly used in the production and manufacturing of hot melt adhesives, pressure sensitive adhesives, and high class glues. 收起 | |
Refined Rosin Modified Resin PE-100L | Resin Chemicals Co., Ltd. | Refined Rosin Modified Resin PE-100L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 97-103°C. This product is co...展开 Refined Rosin Modified Resin PE-100L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 97-103°C. This product is commonly used in the production and manufacturing of hot melt adhesives, pressure sensitive adhesives, and high class glues. 收起 | |
Refined Rosin Modified Resin PE-105L | Resin Chemicals Co., Ltd. | Refined Rosin Modified Resin PE-105L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 102-108°C. This product is c...展开 Refined Rosin Modified Resin PE-105L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 102-108°C. This product is commonly used in the production and manufacturing of hot melt adhesives, pressure sensitive adhesives, and high class glues. 收起 | |
Refined Rosin Modified Resin PE-95L | Resin Chemicals Co., Ltd. | Refined Rosin Modified Resin PE-95L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 92-98°C. This product is comm...展开 Refined Rosin Modified Resin PE-95L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 92-98°C. This product is commonly used in the production and manufacturing of hot melt adhesives, pressure sensitive adhesives, and high class glues. 收起 | |
REPUTAIN® D20 | Arxada – Troy Corporation | REPUTAIN® D20 is a fast-acting biocide that may be used to reduce microbiological contamination in raw materials and/or products such as aqueous paints and coatings, polymers, slurries, adhesives, latex and resin emulsions, sizing, caulk, process water, a...展开 REPUTAIN® D20 is a fast-acting biocide that may be used to reduce microbiological contamination in raw materials and/or products such as aqueous paints and coatings, polymers, slurries, adhesives, latex and resin emulsions, sizing, caulk, process water, along with specialty industrial products including inks, polishes, waxes, detergents, and cleansers. 收起 | |
Rosin Modified Maleic Resin MR-130 | Resin Chemicals Co., Ltd. | Rosin Modified Maleic Resin MR-130 is a raw material that is esterified by the addition of gum rosin, maleic anhydride, glycerol or pentaerythritol. It is transparent to pale yellow flakes in appearance with a Gardner grade color of 3-4. This product is u...展开 Rosin Modified Maleic Resin MR-130 is a raw material that is esterified by the addition of gum rosin, maleic anhydride, glycerol or pentaerythritol. It is transparent to pale yellow flakes in appearance with a Gardner grade color of 3-4. This product is used to provide light color production and retention in nitrocellulose lacquers and inks. 收起 | |
Rosin Modified Maleic Resin MR-130D | Resin Chemicals Co., Ltd. | Rosin Modified Maleic Resin MR-130D is a raw material that is esterified by the addition of gum rosin, maleic anhydride, glycerol or pentaerythritol. It is transparent to pale yellow flakes in appearance with a Gardner grade color of 5-8. This product is ...展开 Rosin Modified Maleic Resin MR-130D is a raw material that is esterified by the addition of gum rosin, maleic anhydride, glycerol or pentaerythritol. It is transparent to pale yellow flakes in appearance with a Gardner grade color of 5-8. This product is used to provide light color production and retention in nitrocellulose lacquers and inks. 收起 | |
Rosin Modified Maleic Resin MR115R | Resin Chemicals Co., Ltd. | Rosin Modified Maleic Resin MR115R is a solid adduct of gum rosin and maleic anhydride created through the esterification of glycerol. It is pale, yellow solid flakes in appearance with a softening point of 112-117°C. This product is commonly used to prov...展开 Rosin Modified Maleic Resin MR115R is a solid adduct of gum rosin and maleic anhydride created through the esterification of glycerol. It is pale, yellow solid flakes in appearance with a softening point of 112-117°C. This product is commonly used to provide resistance to abrasion, crocking, and crushing while providing leveling and fast drying in traffic marking paints. 收起 | |
Rosin Modified Maleic Resin MR120R | Resin Chemicals Co., Ltd. | Rosin Modified Maleic Resin MR120R is a solid adduct of gum rosin and maleic anhydride created through the esterification of glycerol. It is pale, yellow solid flakes in appearance with a softening point of 117-123°C. This product is commonly used to prov...展开 Rosin Modified Maleic Resin MR120R is a solid adduct of gum rosin and maleic anhydride created through the esterification of glycerol. It is pale, yellow solid flakes in appearance with a softening point of 117-123°C. This product is commonly used to provide resistance to abrasion, crocking, and crushing while providing leveling and fast drying in traffic marking paints. 收起 | |
Rosin Modified Maleic Resin MR125R | Resin Chemicals Co., Ltd. | Rosin Modified Maleic Resin MR125R is a solid adduct of gum rosin and maleic anhydride created through the esterification of glycerol. It is pale, yellow solid flakes in appearance with a softening point of 122-128°C. This product is commonly used to prov...展开 Rosin Modified Maleic Resin MR125R is a solid adduct of gum rosin and maleic anhydride created through the esterification of glycerol. It is pale, yellow solid flakes in appearance with a softening point of 122-128°C. This product is commonly used to provide resistance to abrasion, crocking, and crushing while providing leveling and fast drying in traffic marking paints. 收起 | |
Rosin Modified Phenolic Resin PI116 | Resin Chemicals Co., Ltd. | Rosin Modified Phenolic Resin PI116 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 1500-2200 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展开 Rosin Modified Phenolic Resin PI116 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 1500-2200 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起 | |
Rosin Modified Phenolic Resin PI118 | Resin Chemicals Co., Ltd. | Rosin Modified Phenolic Resin PI118 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 2000-2800 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展开 Rosin Modified Phenolic Resin PI118 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 2000-2800 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起 | |
Rosin Modified Phenolic Resin PI136 | Resin Chemicals Co., Ltd. | Rosin Modified Phenolic Resin PI136 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 1600-2500 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展开 Rosin Modified Phenolic Resin PI136 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 1600-2500 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起 | |
Rosin Modified Phenolic Resin PI138 | Resin Chemicals Co., Ltd. | Rosin Modified Phenolic Resin PI138 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 2400-3200 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展开 Rosin Modified Phenolic Resin PI138 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 2400-3200 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起 | |
Rosin Modified Phenolic Resin PI142 | Resin Chemicals Co., Ltd. | Rosin Modified Phenolic Resin PI142 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 1500-2500 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展开 Rosin Modified Phenolic Resin PI142 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 1500-2500 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起 | |
Rosin Modified Phenolic Resin PI145 | Resin Chemicals Co., Ltd. | Rosin Modified Phenolic Resin PI145 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 500-900 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used...展开 Rosin Modified Phenolic Resin PI145 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 500-900 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起 | |
Rosin Modified Phenolic Resin PI146 | Resin Chemicals Co., Ltd. | Rosin Modified Phenolic Resin PI146 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 1300-1800 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展开 Rosin Modified Phenolic Resin PI146 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 1300-1800 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起 | |
Rosin Modified Phenolic Resin PI147 | Resin Chemicals Co., Ltd. | Rosin Modified Phenolic Resin PI147 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 5500-8500 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展开 Rosin Modified Phenolic Resin PI147 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 5500-8500 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起 | |
Rosin Modified Phenolic Resin PI148 | Resin Chemicals Co., Ltd. | Rosin Modified Phenolic Resin PI148 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 3500-5000 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展开 Rosin Modified Phenolic Resin PI148 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 3500-5000 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起 | |
Rosin Modified Phenolic Resin PI149 | Resin Chemicals Co., Ltd. | Rosin Modified Phenolic Resin PI149 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 3000-4500 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展开 Rosin Modified Phenolic Resin PI149 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 3000-4500 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起 | |
Rosin Modified Phenolic Resin PI152 | Resin Chemicals Co., Ltd. | Rosin Modified Phenolic Resin PI152 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 3800-5000 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展开 Rosin Modified Phenolic Resin PI152 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 3800-5000 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起 | |
Rosin Modified Phenolic Resin PI155 | Resin Chemicals Co., Ltd. | Rosin Modified Phenolic Resin PI155 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 1800-2500 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展开 Rosin Modified Phenolic Resin PI155 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 1800-2500 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起 | |
Rosin Modified Phenolic Resin PI160 | Resin Chemicals Co., Ltd. | Rosin Modified Phenolic Resin PI160 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 10000-14000 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly ...展开 Rosin Modified Phenolic Resin PI160 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 10000-14000 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起 | |
Rosin Modified Resin GE85 | Resin Chemicals Co., Ltd. | Rosin Modified Resin GE85 is a glycerol ester of gum rosin that is esterified by gum rosin and glycerol or pertaerythrite. It is a slightly yellow to transparent flake or bead in appearance with a softening point of 85-89°C. This product is commonly used ...展开 Rosin Modified Resin GE85 is a glycerol ester of gum rosin that is esterified by gum rosin and glycerol or pertaerythrite. It is a slightly yellow to transparent flake or bead in appearance with a softening point of 85-89°C. This product is commonly used as a raw material in applications such as hot melt adhesives, pressure sensitive adhesives, and glue. 收起 | |
Rosin Modified Resin GE90 | Resin Chemicals Co., Ltd. | Rosin Modified Resin GE90 is a glycerol ester of gum rosin that is esterified by gum rosin and glycerol or pertaerythrite. It is a slightly yellow to transparent flake or bead in appearance with a softening point of 88-92°C. This product is commonly used ...展开 Rosin Modified Resin GE90 is a glycerol ester of gum rosin that is esterified by gum rosin and glycerol or pertaerythrite. It is a slightly yellow to transparent flake or bead in appearance with a softening point of 88-92°C. This product is commonly used as a raw material in applications such as hot melt adhesives, pressure sensitive adhesives, and glue. 收起 | |
Rosin Modified Resin PE 105 | Resin Chemicals Co., Ltd. | Rosin Modified Resin PE105 is a glycerol ester of gum rosin that is esterified by gum rosin and glycerol or pertaerythrite. It is a slightly yellow to transparent flake or bead in appearance with a softening point of 103-107°C. This product is commonly us...展开 Rosin Modified Resin PE105 is a glycerol ester of gum rosin that is esterified by gum rosin and glycerol or pertaerythrite. It is a slightly yellow to transparent flake or bead in appearance with a softening point of 103-107°C. This product is commonly used as a raw material in applications such as hot melt adhesives, pressure sensitive adhesives, and glue. 收起 | |
Rosin Modified Resin PE100 | Resin Chemicals Co., Ltd. | Rosin Modified Resin PE100 is a glycerol ester of gum rosin that is esterified by gum rosin and glycerol or pertaerythrite. It is a slightly yellow to transparent flake or bead in appearance with a softening point of 98-102°C. This product is commonly use...展开 Rosin Modified Resin PE100 is a glycerol ester of gum rosin that is esterified by gum rosin and glycerol or pertaerythrite. It is a slightly yellow to transparent flake or bead in appearance with a softening point of 98-102°C. This product is commonly used as a raw material in applications such as hot melt adhesives, pressure sensitive adhesives, and glue. 收起 | |
Rosin Modified Resin PE95 | Resin Chemicals Co., Ltd. | Rosin Modified Resin PE95 is a glycerol ester of gum rosin that is esterified by gum rosin and glycerol or pertaerythrite. It is a slightly yellow to transparent flake or bead in appearance with a softening point of 93-97°C. This product is commonly used ...展开 Rosin Modified Resin PE95 is a glycerol ester of gum rosin that is esterified by gum rosin and glycerol or pertaerythrite. It is a slightly yellow to transparent flake or bead in appearance with a softening point of 93-97°C. This product is commonly used as a raw material in applications such as hot melt adhesives, pressure sensitive adhesives, and glue. 收起 | |
Strontium Chromate | BassTech International | Strontium Chromate is a yellow powder which is used as an anti-corrosive pigment in paint, coatings, and inks. | |
Terpene Resin 105 | Resin Chemicals Co., Ltd. | Terpene Resin 105 is a raw material created from aluminum trichloride and α-Pinene that appears as a pale yellow, transparent solid. It has a softening point of 100-110°C and contains a maximum impurity level of 30ppm. This product is commonly used in the...展开 Terpene Resin 105 is a raw material created from aluminum trichloride and α-Pinene that appears as a pale yellow, transparent solid. It has a softening point of 100-110°C and contains a maximum impurity level of 30ppm. This product is commonly used in the manufacturing of hot melt adhesives, pressure sensitive adhesives, and glue. 收起 | |
Terpene Resin 115 | Resin Chemicals Co., Ltd. | Terpene Resin 115 is a raw material created from aluminum trichloride and α-Pinene that appears as a pale yellow, transparent solid. It has a softening point of 110-120°C and contains a maximum impurity level of 30ppm. This product is commonly used in the...展开 Terpene Resin 115 is a raw material created from aluminum trichloride and α-Pinene that appears as a pale yellow, transparent solid. It has a softening point of 110-120°C and contains a maximum impurity level of 30ppm. This product is commonly used in the manufacturing of hot melt adhesives, pressure sensitive adhesives, and glue. 收起 | |
Terpene Resin 85 | Resin Chemicals Co., Ltd. | Terpene Resin 85 is a raw material created from aluminum trichloride and α-Pinene that appears as a pale yellow, transparent solid. It has a softening point of 80-90°C and contains a maximum impurity level of 30ppm. This product is commonly used in the ma...展开 Terpene Resin 85 is a raw material created from aluminum trichloride and α-Pinene that appears as a pale yellow, transparent solid. It has a softening point of 80-90°C and contains a maximum impurity level of 30ppm. This product is commonly used in the manufacturing of hot melt adhesives, pressure sensitive adhesives, and glue. 收起 | |
Terpene Resin 95 | Resin Chemicals Co., Ltd. | Terpene Resin 95 is a raw material created from aluminum trichloride and α-Pinene that appears as a pale yellow, transparent solid. It has a softening point of 90-100°C and contains a maximum impurity level of 30ppm. This product is commonly used in the m...展开 Terpene Resin 95 is a raw material created from aluminum trichloride and α-Pinene that appears as a pale yellow, transparent solid. It has a softening point of 90-100°C and contains a maximum impurity level of 30ppm. This product is commonly used in the manufacturing of hot melt adhesives, pressure sensitive adhesives, and glue. 收起 | |
Thermoplastic Road Marking Resin RM-100 | Resin Chemicals Co., Ltd. | Thermoplastic Road Marking Resin RM-100 is a raw material produced from gum rosin that is used to provide light color and moderate softening, UV absorption, light stability, and actualization for light screen in thermoplastic road marking paints. This pro...展开 Thermoplastic Road Marking Resin RM-100 is a raw material produced from gum rosin that is used to provide light color and moderate softening, UV absorption, light stability, and actualization for light screen in thermoplastic road marking paints. This product is pale yellow beads in appearance with a softening point of 97-103°C. 收起 | |
Thermoplastic Road Marking Resin RM-105 | Resin Chemicals Co., Ltd. | Thermoplastic Road Marking Resin RM-105 is a raw material produced from gum rosin that is used to provide light color and moderate softening, UV absorption, light stability, and actualization for light screen in thermoplastic road marking paints. This pro...展开 Thermoplastic Road Marking Resin RM-105 is a raw material produced from gum rosin that is used to provide light color and moderate softening, UV absorption, light stability, and actualization for light screen in thermoplastic road marking paints. This product is pale yellow beads in appearance with a softening point of 102-108°C. 收起 | |
Thermoplastic Road Marking Resin RM-110 | Resin Chemicals Co., Ltd. | Thermoplastic Road Marking Resin RM-110 is a raw material produced from gum rosin that is used to provide light color and moderate softening, UV absorption, light stability, and actualization for light screen in thermoplastic road marking paints. This pro...展开 Thermoplastic Road Marking Resin RM-110 is a raw material produced from gum rosin that is used to provide light color and moderate softening, UV absorption, light stability, and actualization for light screen in thermoplastic road marking paints. This product is pale yellow beads in appearance with a softening point of 107-113°C. 收起 | |
Thermoplastic Road Marking Resin RM-95 | Resin Chemicals Co., Ltd. | Thermoplastic Road Marking Resin RM-95 is a raw material produced from gum rosin that is used to provide light color and moderate softening, UV absorption, light stability, and actualization for light screen in thermoplastic road marking paints. This prod...展开 Thermoplastic Road Marking Resin RM-95 is a raw material produced from gum rosin that is used to provide light color and moderate softening, UV absorption, light stability, and actualization for light screen in thermoplastic road marking paints. This product is pale yellow beads in appearance with a softening point of 92-98°C. 收起 | |
Titanium Dioxide | BassTech International | Titanium Dioxide is the naturally occurring oxide of titanium which has a white appearance. This product is primarily used for coatings and glass, but may also be used in paint and inks. | |
TROYKYD® D11 | Arxada – Troy Corporation | TROYKYD® D11 is an efficient defoamer for adhesives, coatings, polymers and construction applications. It is readily dispersible and provides easy incorporate into viscous material and for application where only low shear mixing is available. | |
TROYKYD® D121 | Arxada – Troy Corporation | TROYKYD® D121 is a powder defoamer for use in cement-based, gypsum-based and various other dry mix systems. Since TROYKYD® D121 is free-flowing, it is easily dispersible and can be added directly ti a dry blend or as a premix. | |
TROYKYD® D209W | Arxada – Troy Corporation | TROYKYD® D209W is a solvent free defoamer for water-based high gloss and wood coatings. TROYKYD® D209W effectively eliminates foam in the production and application of a broad range of aqueous systems. | |
TROYKYD® D230 | Arxada – Troy Corporation | TROYKYD® D230 is a high performance antifoam for aqueous dispersion products. TROYKYD® D230 provides excellent micro-foam elimination in aqueous systems. | |
TROYKYD® D704 | Arxada – Troy Corporation | TROYKYD® D704 providef excellent bubble breaking and air-release performance over a wide range of application. The additive is effective in flat through semi-gloss aqueous coatings and can be used as both the process antifoam and application defoamer. | |
TROYKYD® D727 | Arxada – Troy Corporation | TROYKYD® D727 is a water dispersible multi-hydrophobe defoamer. TROYKYD® D727 provides rapid foam knock down, air-release and bubble breaking in many adhesive, polymer, construction products and ink applications. | |
TROYKYD® D742 | Arxada – Troy Corporation | TROYKYD® D742 is a non-ionic air-release additive for aqueous systems. TROYKYD® D742 is a blend of modified silicone and polyglycols. It provides excellent bubble-breaking and air-release performance over a wide range of applications. | |
TROYSAN® 1050 | Arxada – Troy Corporation | TROYSAN® 1050 is a water based product designed to inhibit the growth of bacteria on coated surfaces. This product is particularly useful to impart bacterial resistance to paint surfaces to reduce the average bacteria counts. It provides long term antibac...展开 TROYSAN® 1050 is a water based product designed to inhibit the growth of bacteria on coated surfaces. This product is particularly useful to impart bacterial resistance to paint surfaces to reduce the average bacteria counts. It provides long term antibacterial protection in interior paints, adhesives, sealants, and caulks. 收起 | |
TROYSAN® 107 | Arxada – Troy Corporation | TROYSAN® 107 is a full spectrum, non-metallic technical preservative for a broad variety of application. TROYSAN® 107 is effective against a wide range of yeast and fungi and can be used to protect materials in both interior and exterior applications. | |
TROYSAN® 206CR | Arxada – Troy Corporation | TROYSAN® 206CR is a highly effective growth inhibitor of algae that provide long-term protection for exterior coated surfaces. Controlled Release technology reduces the unwarranted leaching of active ingredients from the coatings surface, and in turn prov...展开 TROYSAN® 206CR is a highly effective growth inhibitor of algae that provide long-term protection for exterior coated surfaces. Controlled Release technology reduces the unwarranted leaching of active ingredients from the coatings surface, and in turn provides long-term protection to the coated surface. 收起 |