| Adhesion Reinforcing Primer/B3325 | Tianjin Boyuan New Materials Co., Ltd. 天津博苑高新材料有限公司 | B3325 is a kind of water based primer which was especially for film/sheet adhesion reinforcing. It can improve surface performance and ensure excellent adhesion between the coating and the base material. | |
| Alcohol Soluble Maleic Resin WMR110 | Resin Chemicals Co., Ltd. | Alcohol Soluble Maleic Resin WMR110 is a raw material created from modified maleic resins through the esterification of polyalcohol. It is a bead or flake in appearance with a softening point of 100-120°C. This product is commonly used to provide high glo...展开 Alcohol Soluble Maleic Resin WMR110 is a raw material created from modified maleic resins through the esterification of polyalcohol. It is a bead or flake in appearance with a softening point of 100-120°C. This product is commonly used to provide high gloss and fast drying in alcohol soluble printing inks and water-based inks. 收起 | |
| Alcohol Soluble Maleic Resin WMR130 | Resin Chemicals Co., Ltd. | Alcohol Soluble Maleic Resin WMR130 is a raw material created from modified maleic resins through the esterification of polyalcohol. It is a bead or flake in appearance with a softening point of 120-140°C. This product is commonly used to provide high glo...展开 Alcohol Soluble Maleic Resin WMR130 is a raw material created from modified maleic resins through the esterification of polyalcohol. It is a bead or flake in appearance with a softening point of 120-140°C. This product is commonly used to provide high gloss and fast drying in alcohol soluble printing inks and water-based inks. 收起 | |
| Alcohol Soluble Maleic Resin WMR150 | Resin Chemicals Co., Ltd. | Alcohol Soluble Maleic Resin WMR150 is a raw material created from modified maleic resins through the esterification of polyalcohol. It is a bead or flake in appearance with a softening point of 140-150°C. This product is commonly used to provide high glo...展开 Alcohol Soluble Maleic Resin WMR150 is a raw material created from modified maleic resins through the esterification of polyalcohol. It is a bead or flake in appearance with a softening point of 140-150°C. This product is commonly used to provide high gloss and fast drying in alcohol soluble printing inks and water-based inks. 收起 | |
| Aluminum Primer/B3320 | Tianjin Boyuan New Materials Co., Ltd. 天津博苑高新材料有限公司 | Aluminum Primer B3320 is a kind of waterbased primer which was applied for PET film Aluminum pretreatment. Consists of two components A and B, It can increase the surface tension of PET film, and the adhesion between Aluminum layer and PET film. | |
| Anti-Reflective Application Nano Alumina B8013-2 | Tianjin Boyuan New Materials Co., Ltd. 天津博苑高新材料有限公司 | B8013-2具有小的粒径和出色的分散性，使其在抗反射涂层中十分有效。它可以用于光伏玻璃和PET中。它可以通过减少光反射的方式增加透光率。 | |
| Anti-static Primer/B3320K | Tianjin Boyuan New Materials Co., Ltd. 天津博苑高新材料有限公司 | B3320K is a kind of water based primer which was research and developed especially for film/sheet anti-static. It can provide long lasting Dissipative function, effective prevention of electrostatic accumulation. | |
| Barium Chloride | BassTech International | Barium Chloride is the ionic chemical compound with the formula BaCL2 and is one of the most important water-soluble barium salts. This product has a variety of uses such as in the manufacturing of heat treatment salts, case hardening of steel, in the man...展开 Barium Chloride is the ionic chemical compound with the formula BaCL2 and is one of the most important water-soluble barium salts. This product has a variety of uses such as in the manufacturing of heat treatment salts, case hardening of steel, in the manufacture of pigments, oil lubricants, PVC stabilizers and in the manufacture of other barium salts, such as Barium Sulfate, Barium Chromate and Barium Fluoride. 收起 | |
| Barium Nitrate | BassTech International | Barium Nitrate is a salt of barium and the nitrate ion, with chemical formula Ba(NO3)2 which appears as a white solid. This product is used in paint, coatings, and inks. | |
| Blanc Fixe | BassTech International | Blanc Fixe is water and organic solven insoluble and appears as color-neutral due to its low refractive index. This product is used as a component of white pigment, as a transparent filler that prevents flocculation of colored pigments, or to modify consi...展开 Blanc Fixe is water and organic solven insoluble and appears as color-neutral due to its low refractive index. This product is used as a component of white pigment, as a transparent filler that prevents flocculation of colored pigments, or to modify consistency, depending on the application and grade. 收起 | |
| Boehmite for Lithium-ion Battery Separator B8014-L4 | Tianjin Boyuan New Materials Co., Ltd. 天津博苑高新材料有限公司 | B8014-L4 is a boehmite powder with small particle size, high temperature resistance, and low hardness. It can be used as a coating on Lithium-ion battery separators. | |
| Budit 3 | BassTech International | Budit 3 is a pulverized Sodium Polyphosphate glass which is used as a chemical binder in paint, coatings, and inks. This product is best used in applications which are stable, free flowing, and have a rapid rate of solution. | |
| Budit 3H | BassTech International | Budit 3H is a pulverized Sodium Polyphosphate glass which is used as a chemical binder in paint, coatings, and inks. This product is best used in applications which are stable, free flowing, and have a rapid rate of solution. | |
| Budit 4 | BassTech International | Budit 4 is a pulverized Sodium Polyphosphate glass which is used as a chemical binder in paint, coatings, and inks. This product is best used in applications which are stable, free flowing, and have a rapid rate of solution. | |
| Budit 4H | BassTech International | Budit 4H is a pulverized Sodium Polyphosphate glass which is used as a chemical binder in paint, coatings, and inks. This product is best used in applications which are stable, free flowing, and have a rapid rate of solution. | |
| Budit 6 | BassTech International | Budit 6 is a pulverized Sodium Polyphosphate glass which is used as a chemical binder in paint, coatings, and inks. This product is best used in applications which are stable, free flowing, and have a rapid rate of solution. | |
| Budit 6H | BassTech International | Budit 6H is a pulverized Sodium Polyphosphate glass which is used as a chemical binder in paint, coatings, and inks. This product is best used in applications which are stable, free flowing, and have a rapid rate of solution. | |
| Budit 7 | BassTech International | Budit 7 is a pulverized Sodium Polyphosphate glass which is used as a chemical binder in paint, coatings, and inks. This product is best used in applications which are stable, free flowing, and have a rapid rate of solution. | |
| Budit 7H | BassTech International | Budit 7H is a pulverized Sodium Polyphosphate glass which is used as a chemical binder in paint, coatings, and inks. This product is best used in applications which are stable, free flowing, and have a rapid rate of solution. | |
| Budit 8H | BassTech International | Budit 8H is a pulverized Sodium Polyphosphate glass which is used as a chemical binder in paint, coatings, and inks. This product is best used in applications which are stable, free flowing, and have a rapid rate of solution. | |
| Budit 9 | BassTech International | Budit 9 is a pulverized Sodium Polyphosphate glass which is used as a chemical binder in paint, coatings, and inks. This product is best used in applications which are stable, free flowing, and have a rapid rate of solution. | |
| Disproportionated Rosin 1st Grade | Resin Chemicals Co., Ltd. | Disproportionated Rosin 1st Grade is a raw material produced by isomerizing gum rosin with a catalyst. This product is commonly used as a polymer emulsification agent in the production of water-soluble pressure sensitive adhesives. It has a maximum abieti...展开 Disproportionated Rosin 1st Grade is a raw material produced by isomerizing gum rosin with a catalyst. This product is commonly used as a polymer emulsification agent in the production of water-soluble pressure sensitive adhesives. It has a maximum abietic acid content of 0.5% and a softening point of 76°C. 收起 | |
| Disproportionated Rosin Extra Grade | Resin Chemicals Co., Ltd. | Disproportionated Rosin Extra Grade is a raw material produced by isomerizing gum rosin with a catalyst. This product is commonly used as a polymer emulsification agent in the production of water-soluble pressure sensitive adhesives. It has a maximum abie...展开 Disproportionated Rosin Extra Grade is a raw material produced by isomerizing gum rosin with a catalyst. This product is commonly used as a polymer emulsification agent in the production of water-soluble pressure sensitive adhesives. It has a maximum abietic acid content of 0.1% and a softening point of 76°C. 收起 | |
| Dorkafill® H | BassTech International | Dorkafill® H is a functional filler in paint, coatings, and inks. This product brings matting properties and viscosity alongside basic performance (brightness, opacity, hardness, etc) and often allows an increase of the pigment volume concentration (PVC) ...展开 Dorkafill® H is a functional filler in paint, coatings, and inks. This product brings matting properties and viscosity alongside basic performance (brightness, opacity, hardness, etc) and often allows an increase of the pigment volume concentration (PVC) without a loss of quality. 收起 | |
| Dorkafill® Pro_Void | BassTech International | Dorkafill® Pro_Void is a functional filler in paint, coatings, and inks. This product provides matting properties and scrub resistance which result in lower oil absorption (and thus a reduction in resin, advantages in dispersion, viscosity and more flexib...展开 Dorkafill® Pro_Void is a functional filler in paint, coatings, and inks. This product provides matting properties and scrub resistance which result in lower oil absorption (and thus a reduction in resin, advantages in dispersion, viscosity and more flexibility in fine tuning of the paint e.g. open time). 收起 | |
| Dripping and Anti-Fogging Agent B8203 for Agricultural Film | Tianjin Boyuan New Materials Co., Ltd. 天津博苑高新材料有限公司 | Dripping and Anti-Fogging Agent B8203由三部分组成：B8203-A，B8203-B和B8203-C。它是环保无污染的。这款产品可用于温室PE膜的防雾涂料，具有快速滴落和长效耐久的防雾效果。 | |
| Fabutit 734 | BassTech International | Fabutit 734 is a modified STPP (Sodium Tripolyphosphate) which acts as a deflocculant in paint, coatings, and inks. This product is three times more effective than standard STPP and is water soluble. | |
| Green Chrome Oxide | BassTech International | Green Chrome Oxide is the inorganic compound of the formula Cr2O3 which is a principal oxide of chromium and is used as a pigment. This product provides opacity, outdoor durability and heat fastness to paint, coatings, and inks. | |
| Gum Rosin K | Resin Chemicals Co., Ltd. | Gum Rosin K is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a yellow-red, transparent solid in appearance with a softening point of 74°C. This product is used to provide special chemical activity in ...展开 Gum Rosin K is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a yellow-red, transparent solid in appearance with a softening point of 74°C. This product is used to provide special chemical activity in the production of coatings, inks, and rosin ester resins. 收起 | |
| Gum Rosin M | Resin Chemicals Co., Ltd. | Gum Rosin M is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a yellow brown, transparent solid in appearance with a softening point of 74°C. This product is used to provide special chemical activity i...展开 Gum Rosin M is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a yellow brown, transparent solid in appearance with a softening point of 74°C. This product is used to provide special chemical activity in the production of coatings, inks, and rosin ester resins. 收起 | |
| Gum Rosin N | Resin Chemicals Co., Ltd. | Gum Rosin N is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a deep yellow, transparent solid in appearance with a softening point of 75°C. This product is used to provide special chemical activity in...展开 Gum Rosin N is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a deep yellow, transparent solid in appearance with a softening point of 75°C. This product is used to provide special chemical activity in the production of coatings, inks, and rosin ester resins. 收起 | |
| Gum Rosin WG | Resin Chemicals Co., Ltd. | Gum Rosin WG is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a yellow, transparent solid in appearance with a softening point of 75°C. This product is used to provide special chemical activity in the...展开 Gum Rosin WG is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a yellow, transparent solid in appearance with a softening point of 75°C. This product is used to provide special chemical activity in the production of coatings, inks, and rosin ester resins. 收起 | |
| Gum Rosin WW | Resin Chemicals Co., Ltd. | Gum Rosin WW is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a pale yellow, transparent solid in appearance with a softening point of 76°C. This product is used to provide special chemical activity i...展开 Gum Rosin WW is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a pale yellow, transparent solid in appearance with a softening point of 76°C. This product is used to provide special chemical activity in the production of coatings, inks, and rosin ester resins. 收起 | |
| Gum Rosin X | Resin Chemicals Co., Ltd. | Gum Rosin X is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a slightly yellow, transparent solid in appearance with a softening point of 76°C. This product is used to provide special chemical activit...展开 Gum Rosin X is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a slightly yellow, transparent solid in appearance with a softening point of 76°C. This product is used to provide special chemical activity in the production of coatings, inks, and rosin ester resins. 收起 | |
| Heavy Turpentine Oil | Resin Chemicals Co., Ltd. | Heavy Turpentine Oil is pinene with special chemical composition that is primarily used as a solvent. It is transparent in appearance with a maximum relative density of 0.94. This product is commonly used in the manufacturing of applications such as coati...展开 Heavy Turpentine Oil is pinene with special chemical composition that is primarily used as a solvent. It is transparent in appearance with a maximum relative density of 0.94. This product is commonly used in the manufacturing of applications such as coatings, synthetic camphor, synthetic resin, and organic industrial products. 收起 | |
| HESS NCS-10 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-10 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-10 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-12 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-12 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-12 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-15 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-15 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-15 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-3 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-3 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-3 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-5 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-5 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-5 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-8 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-8 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-8 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HIFIFAST ORANGE HF2Y (Pigment Orange 64) | Anshan Hifichem Co., Ltd. 鞍山七彩化学股份有限公司 | HIFIFAST ORANGE HF2Y（颜料橙64）是明亮的黄色调有机橙色颜料。它是行业标准的高性能橙色。出色的色强度，热稳定性和耐光性使其适用于包括食品接触和玩具等几乎所有的聚合物和应用。 | |
| HIFIFAST ORANGE HF3R (Pigment Orange 36) | Anshan Hifichem Co., Ltd. 鞍山七彩化学股份有限公司 | HIFIFAST ORANGE HF3R (Pigment Orange 36) 是一种橙色颜料，在所有涂料系统中有良好全面的色牢性。它推荐用于OEM涂料，修补漆，水基汽车漆，装饰漆和多种类型的工业漆。 | |
| HIFIFAST RED HF2Y (Pigment Red 166) | Anshan Hifichem Co., Ltd. 鞍山七彩化学股份有限公司 | HIFIFAST RED HF2Y (Pigment Red 166)是一款黄色调红色颜料，在低浓度下也有良好的热稳定性。它具有出色的使用性能。 | |
| HIFIFAST RED HF4Y-C (Pigment Red 242) | Anshan Hifichem Co., Ltd. 鞍山七彩化学股份有限公司 | HIFIFAST RED HF4Y-C （Pigment Red 242）是一种有出色的色牢度的强烈猩红色颜料。它适合用于多种聚合物中的纤维，薄膜，注塑成膜和挤出加工应用。 | |
| HIFIFAST RED HF5B-W (Pigment Red 176) | Anshan Hifichem Co., Ltd. 鞍山七彩化学股份有限公司 | HIFIFAST RED HF5B-W（Pigment Red 176）是一种高透明度的蓝色调红色颜料，有良好的色牢度。它有出色的介电性质。这款产品适合用于电缆剪切及纺丝染色应用中。 | |
| HIFIFAST RED HFBY-L (Pigment Red 144) | Anshan Hifichem Co., Ltd. 鞍山七彩化学股份有限公司 | HIFIFAST RED HFBY-L (Pigment Red 144) 是一种多功能蓝色调红色颜料，有出色的色牢度和分散性。它推荐用于聚丙烯纤维，PVC汽车制造和电缆应用中。 | |
| HIFIFAST YELLOW HF3G (Pigment Yellow 154) | Anshan Hifichem Co., Ltd. 鞍山七彩化学股份有限公司 | HIFIFAST YELLOW HF3G（Pigment Yellow 154）是一种中等黄色调颜料，有出色的耐光性和耐候性。由于具有出色的耐受性，它十分适用于各种浓度范围，包括浓度低至非常淡的色彩，并很适合作为着色颜料。它具有很好的流动性，也可以在不影响光泽度的前提下用于高浓度颜料。 | |
| HIFIFAST YELLOW HF4G-LB (Pigment Yellow 151) | Anshan Hifichem Co., Ltd. 鞍山七彩化学股份有限公司 | HIFIFAST YELLOW HF4G-LB（Pigment Yellow 151）是一种绿色调黄色颜料，有出色的耐光性和耐候性，特别是深色调。它具有有机颜料中相对良好的不透明性。由于它在油漆中具有很好的流动性，它可以在高颜料浓度下使用，且不影响光泽度。应当注意的是对强碱的耐性并不令人满意。 | |
| HIFIFAST YELLOW HF4R-C (Pigment Yellow 139) | Anshan Hifichem Co., Ltd. 鞍山七彩化学股份有限公司 | HIFIFAST YELLOW HF4R-C （Pigment Yellow 139）是一种红色调黄色颜料，有出色的耐光性和耐候性，特别是在深色调中。作为有机颜料，它有出色的不透明性。它特别适用于为低铅油漆生产深色不透明无铅黄色。 | |
| HIFIFAST YELLOW HF5M-FB (Pigment Yellow 180) | Anshan Hifichem Co., Ltd. 鞍山七彩化学股份有限公司 | HIFIFAST YELLOW HF5M-FB (Pigment Yellow 180)是一种绿色调黄色颜料，有出色的色牢度。这款颜料已经成为高性能绿色调黄色的行业标准。它在多种聚合物中进行使用，还包括食品和玩具应用等 | |
| High Purity Dispersible Nano Alumina-B8013-2 | Tianjin Boyuan New Materials Co., Ltd. 天津博苑高新材料有限公司 | B8013-2是一款高纯度纳米氧化铝产品，粒径小并有出色的分散能力。它可以通过降低光反射率增加透明度，因此适用于抗反射涂层。这款产品可用于光电玻璃和PET中。 | |
| High Purity Dispersible Nano Alumina-B8014 | Tianjin Boyuan New Materials Co., Ltd. 天津博苑高新材料有限公司 | B8014 is a kind of high purity, highly dispersible, synthetic boehmite alumina powder. Dispersions can be simply formed by stirring the powder in deionized water. It is mainly used as an inorganic additive in the absorbing layer of inkjet media, catalysts...展开 B8014 is a kind of high purity, highly dispersible, synthetic boehmite alumina powder. Dispersions can be simply formed by stirring the powder in deionized water. It is mainly used as an inorganic additive in the absorbing layer of inkjet media, catalysts support, ceramic additives and paint fillers. 收起 | |
| Hydrocarbon DCPD Resin HSU100 | Resin Chemicals Co., Ltd. | Hydrocarbon DCPD Resin HSU100 is a water-white thermoplastic resin produced from polymerization and hydrogenation of cyclic ingredients. This product is designed to provide good heat resistance and good compatibility with base polymers. It is often used a...展开 Hydrocarbon DCPD Resin HSU100 is a water-white thermoplastic resin produced from polymerization and hydrogenation of cyclic ingredients. This product is designed to provide good heat resistance and good compatibility with base polymers. It is often used as a tackifier for hot melt adhesives, hot melt pressure sensitive adhesives, and solvent-based pressure sensitive adhesives. 收起 | |
| Hydrocarbon Resin C5 HPE100A | Resin Chemicals Co., Ltd. | Hydrocarbon Resin C5 HPE100A is a raw material designed to provide light color, heat resistance, anti-oxidant properties, and bonding strength. This product is a yellow solid with a flake or bead-like appearance and is commonly used in the manufacturing o...展开 Hydrocarbon Resin C5 HPE100A is a raw material designed to provide light color, heat resistance, anti-oxidant properties, and bonding strength. This product is a yellow solid with a flake or bead-like appearance and is commonly used in the manufacturing of hot melt adhesives, pressure sensitive adhesives, and glue. 收起 | |
| Hydrocarbon Resin C5 HPE100A-L | Resin Chemicals Co., Ltd. | Hydrocarbon Resin C5 HPE100A-L is a raw material designed to provide light color, heat resistance, anti-oxidant properties, and bonding strength. This product is a yellow solid with a flake or bead-like appearance and is commonly used in the manufacturing...展开 Hydrocarbon Resin C5 HPE100A-L is a raw material designed to provide light color, heat resistance, anti-oxidant properties, and bonding strength. This product is a yellow solid with a flake or bead-like appearance and is commonly used in the manufacturing of hot melt adhesives, pressure sensitive adhesives, and glue. 收起 | |
| Hydrocarbon Resin C5 HPE100R | Resin Chemicals Co., Ltd. | Hydrocarbon Resin C5 HPE100R is a raw material used to provide resistance to crushing, abrasion, and smudge while providing fast drying properties. It has a Voc of 0.4 mg/m3 and a softening point of 98-102°C. This product is commonly applied in thermoplas...展开 Hydrocarbon Resin C5 HPE100R is a raw material used to provide resistance to crushing, abrasion, and smudge while providing fast drying properties. It has a Voc of 0.4 mg/m3 and a softening point of 98-102°C. This product is commonly applied in thermoplastic road-marking paints, bitumen road surfaces, asphalt, and cement road surfaces. 收起 | |
| Hydrocarbon Resin C5 HPE100R-S | Resin Chemicals Co., Ltd. | Hydrocarbon Resin C5 HPE100R-S is a raw material used to provide resistance to crushing, abrasion, and smudge while providing fast drying properties. It has a Voc of 0.8 mg/m3 and a softening point of 98-102°C. This product is commonly applied in thermopl...展开 Hydrocarbon Resin C5 HPE100R-S is a raw material used to provide resistance to crushing, abrasion, and smudge while providing fast drying properties. It has a Voc of 0.8 mg/m3 and a softening point of 98-102°C. This product is commonly applied in thermoplastic road-marking paints, bitumen road surfaces, asphalt, and cement road surfaces. 收起 | |
| Hydrocarbon Resin C9 HPE100P | Resin Chemicals Co., Ltd. | Hydrocarbon Resin C9 HPE100P is an aromatic, low molecular weight thermoplastic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide solubility, water resistance, insulation, low...展开 Hydrocarbon Resin C9 HPE100P is an aromatic, low molecular weight thermoplastic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide solubility, water resistance, insulation, low heat conduction, and chemical stability in adhesives, paints, and inks. It has a softening point of 90-110°C and is soluble in coal tars, esters, and turpentine oil. 收起 | |
| Hydrocarbon Resin C9 HPE100P-D | Resin Chemicals Co., Ltd. | Hydrocarbon Resin C9 HPE100P-D is an aromatic, low molecular weight thermoplastic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide solubility, water resistance, insulation, l...展开 Hydrocarbon Resin C9 HPE100P-D is an aromatic, low molecular weight thermoplastic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide solubility, water resistance, insulation, low heat conduction, and chemical stability in adhesives, paints, and inks. It has a softening point of 90-110°C and is soluble in coal tars, esters, and turpentine oil. 收起 | |
| Hydrocarbon Resin C9 HPE120P | Resin Chemicals Co., Ltd. | Hydrocarbon Resin C9 HPE120P is an aromatic, low molecular weight thermoplastic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide solubility, water resistance, insulation, low...展开 Hydrocarbon Resin C9 HPE120P is an aromatic, low molecular weight thermoplastic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide solubility, water resistance, insulation, low heat conduction, and chemical stability in adhesives, paints, and inks. It has a softening point of 110-140°C and is soluble in coal tars, esters, and turpentine oil. 收起 | |
| Hydrocarbon Resin C9 HPE120P-D | Resin Chemicals Co., Ltd. | Hydrocarbon Resin C9 HPE120P-D is an aromatic, low molecular weight thermoplastic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide solubility, water resistance, insulation, l...展开 Hydrocarbon Resin C9 HPE120P-D is an aromatic, low molecular weight thermoplastic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide solubility, water resistance, insulation, low heat conduction, and chemical stability in adhesives, paints, and inks. It has a softening point of 110-140°C and is soluble in coal tars, esters, and turpentine oil. 收起 | |
| Hydrocarbon Resin C9 HPE120PL | Resin Chemicals Co., Ltd. | Hydrocarbon Resin C9 HPE120PL is a low molecular weight thermoplastic aromatic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide good solubility, water resistance, insulation,...展开 Hydrocarbon Resin C9 HPE120PL is a low molecular weight thermoplastic aromatic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide good solubility, water resistance, insulation, low heat conduction, and chemical stability in adhesives, paints, and inks. It has a softening point of 115-125°C and is soluble in coal tars, esters, and turpentine oil. 收起 | |
| Hydrogenated Hydrocarbon Resin C5 HPE100H | Resin Chemicals Co., Ltd. | Hydrogenated Hydrocarbon Resin C5 HPE100H is a hydrogenated hydrocarbon resin designed to provide light color, heat resistance, anti-oxidant properties, and bonding strength. This product is slight yellow transparent flakes or beads in appearance and is c...展开 Hydrogenated Hydrocarbon Resin C5 HPE100H is a hydrogenated hydrocarbon resin designed to provide light color, heat resistance, anti-oxidant properties, and bonding strength. This product is slight yellow transparent flakes or beads in appearance and is commonly used in the manufacturing of hot melt adhesives, pressure sensitive adhesives, and glue. 收起 | |
| Hydrogenated Hydrocarbon Resin C9 HFM-100 | Resin Chemicals Co., Ltd. | Hydrogenated Hydrocarbon Resin C9 HFM-100 is a water-white hydrogenated hydrocarbon resin designed to provide light color, low melt-viscosity, narrow molecular weight distribution, and excellent thermal stability. This product is commonly used in the manu...展开 Hydrogenated Hydrocarbon Resin C9 HFM-100 is a water-white hydrogenated hydrocarbon resin designed to provide light color, low melt-viscosity, narrow molecular weight distribution, and excellent thermal stability. This product is commonly used in the manufacturing of hot melt adhesives and solvent-based pressure sensitive adhesives. 收起 | |
| Hydrogenated Rosin Ester | Resin Chemicals Co., Ltd. | Hydrogenated Rosin Ester HGE100 is a glycerol ester of hydrogenated rosin. This product is commonly used in applications such as screen protection film, diaper adhesive, pressure sensitive adhesive, and hot melt adhesives. It can provide super light color...展开 Hydrogenated Rosin Ester HGE100 is a glycerol ester of hydrogenated rosin. This product is commonly used in applications such as screen protection film, diaper adhesive, pressure sensitive adhesive, and hot melt adhesives. It can provide super light color, low odor, good heat stability, and excellent aging resistance. 收起 | |
| Hydrogenated Rosin-A | Resin Chemicals Co., Ltd. | Hydrogenated Rosin-A is a raw material that is commonly used in the manufacturing of adhesives, inks, and coatings. This product is transparent in appearance with a maximum abietic acid content of 2.0% and a softening point of 76°C. | |
| Hydrogenated Rosin-B | Resin Chemicals Co., Ltd. | Hydrogenated Rosin-B is a raw material that is commonly used in the manufacturing of adhesives, inks, and coatings. This product is transparent in appearance with a maximum abietic acid content of 2.0% and a softening point of 76°C. | |
| Hydrogenated Rosin-C | Resin Chemicals Co., Ltd. | Hydrogenated Rosin-C is a raw material that is commonly used in the manufacturing of adhesives, inks, and coatings. This product is transparent in appearance with a maximum abietic acid content of 2.0% and a softening point of 76°C. | |
| Hydrogenated Rosin-D | Resin Chemicals Co., Ltd. | Hydrogenated Rosin-D is a raw material that is commonly used in the manufacturing of adhesives, inks, and coatings. This product is transparent in appearance with a maximum abietic acid content of 2.0% and a softening point of 76°C. | |
| Ink Absorbing Coating for Textile and Canvas B8204 | Tianjin Boyuan New Materials Co., Ltd. 天津博苑高新材料有限公司 | B8204是水基油墨吸收涂层。它主要用作室内纺织品，横幅，织物和帆布的油墨吸收层。这款产品无毒，无污染，有出色的色彩还原性，印刷精度，耐水性和灵活性。 | |
| Inorganic Nanoparticles Emulsifier B8013 | Tianjin Boyuan New Materials Co., Ltd. 天津博苑高新材料有限公司 | Inorganic Nanoparticles Emulsifier B8013是小颗粒，高纯度的勃姆石粉末。它具有出色的分散和胶溶性能。这款产品可在油墨和涂料中用做颗粒乳化剂。这款产品颗粒大小为5-10nm。 | |
| Inorganic Nanoparticles Emulsifier B8014 | Tianjin Boyuan New Materials Co., Ltd. 天津博苑高新材料有限公司 | Inorganic Nanoparticles Emulsifier B8014是一种小粒度，高纯度勃姆石粉末。它具有出色的分散性和胶溶性。这款产品可在油墨和涂料中用作乳化剂颗粒。这款产品的颗粒大小为10-20nm | |
| Iron Orthophosphate | BassTech International | Iron Orthophosphate is a white phosphate of iron and is non-toxic to pets and wildlife. This product is used in paint, coatings, and inks. Iron Orthophosphate has a very small particle size, which leads to improved absorption. | |
| Liquid Rosin Ester LRE-1 | Resin Chemicals Co., Ltd. | Liquid Rosin Ester LRE-1 is a liquid rosin resin created from gum rosin through esterification with polyol. This product is commonly used in applications such as solvent-based PSA, adhesive tapes, and glue. | |
| Methyl Ethyl Ketone | BassTech International | Methyl Ethyl Ketone is an organic compound that is a colorless liquid with a sharp, sweet odor reminiscent of butterscotch and acetone. This product is most commonly used as an industrial solvent, but may also be used in paint, coatings, and inks. | |
| Nano Alumina (Catalyst Support, Ceramic Filler) | Tianjin Boyuan New Materials Co., Ltd. 天津博苑高新材料有限公司 | Nano Alumina is a small particle size, high purity product with excellent dispersibility and peptizing properties. Different grades can be provided in accordance with different requirements of customers. It can be used as catalysts support or binder in au...展开 Nano Alumina is a small particle size, high purity product with excellent dispersibility and peptizing properties. Different grades can be provided in accordance with different requirements of customers. It can be used as catalysts support or binder in automotive exhaust purification, industrial emissions processing and in the refinery industry. It can be also used as ceramic filler. It is a practical and effective product for improving the thermal stability and mechanical strength of materials. 收起 | |
| Nano Alumina For Inkjet Coating G11 (Neutral) | Tianjin Boyuan New Materials Co., Ltd. 天津博苑高新材料有限公司 | G11 is a kind of high purity, highly dispersible, synthetic Boehmite alumina powder. The pH is neutral. Dispersions can be simply formed by stirring the powder in deionized water. It is mainly used as an inorganic additive in the absorbing layer of inkjet...展开 G11 is a kind of high purity, highly dispersible, synthetic Boehmite alumina powder. The pH is neutral. Dispersions can be simply formed by stirring the powder in deionized water. It is mainly used as an inorganic additive in the absorbing layer of inkjet coating. 收起 | |
| Nano Alumina-B8013-2 Coagulant for Paint Fog | Tianjin Boyuan New Materials Co., Ltd. 天津博苑高新材料有限公司 | B8013-2是一款具有小粒径和出色分散性的纳米氧化铝产品。它有较大的表面积，在表面上还有正电荷和活性羟基。这款产品可在雾状涂料中用作凝结剂和脱粘剂。 | |
| Paint Detackification Agent B8013-2 | Tianjin Boyuan New Materials Co., Ltd. 天津博苑高新材料有限公司 | 油漆脱粘剂B8013具有优异的脱粘性、透明度高，且容易分散。它可用于喷漆室废水脱粘漆剂、水性或溶剂型涂料废水，金属离子废水。 | |
| Pigment Orange 62 | Anshan Hifichem Co., Ltd. 鞍山七彩化学股份有限公司 | Pigment Orange 62 is a pigment with the C.I.# of 11775 and has a bright orange hue. It has applications in printing inks, coatings, and industrial coatings. | |
| Polyethylene Wax | BassTech International | Polyethylene Wax is a thermoplastic polymer which has a white appearance. This product is product has a variety of applications including paint, coatings, and inks, and is available in HDPE and LDPE forms. | |
| Polymerized Rosin | Resin Chemicals Co., Ltd. | Polymerized Rosin is a modified product consisting of gum rosin and abietic type acids. This product is used to provide a high softening point, oxidation resistance, and high viscosity in organic solvents. It is commonly used in inks, oil paints, adhesive...展开 Polymerized Rosin is a modified product consisting of gum rosin and abietic type acids. This product is used to provide a high softening point, oxidation resistance, and high viscosity in organic solvents. It is commonly used in inks, oil paints, adhesives, and emulsifying agents. It is a transparent solid in appearance with a softening point of 140-165°C. 收起 | |
| Printing primer/B3320Y | Tianjin Boyuan New Materials Co., Ltd. 天津博苑高新材料有限公司 | B3320Y is a kind of water based primer which was used for increasing printing performance of film/sheet. It can provide long lasting dissipative function, effective prevention of electrostatic accumulation. Consists of two components A and B, It can impro...展开 B3320Y is a kind of water based primer which was used for increasing printing performance of film/sheet. It can provide long lasting dissipative function, effective prevention of electrostatic accumulation. Consists of two components A and B, It can improve surface tension and provide good UV printability. 收起 | |
| Quartz Sand | BassTech International | Quartz Sand is specially designed to add functionality and durability while decreasing the use of expensive resins. This product is used in paint, coatings, and inks, and works well with binders and other additives. | |
| Refined Gum Rosin | Resin Chemicals Co., Ltd. | Refined Gum Rosin is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a light colored, transparent solid in appearance with a softening point of 76°C. This product is used to provide special chemical act...展开 Refined Gum Rosin is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a light colored, transparent solid in appearance with a softening point of 76°C. This product is used to provide special chemical activity in the production of coatings, inks, and rosin ester resins. 收起 | |
| Refined Rosin Modified Resin GE-85L | Resin Chemicals Co., Ltd. | Refined Rosin Modified Resin GE-85L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 85-88°C. This product is comm...展开 Refined Rosin Modified Resin GE-85L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 85-88°C. This product is commonly used in the production and manufacturing of hot melt adhesives, pressure sensitive adhesives, and high class glues. 收起 | |
| Refined Rosin Modified Resin GE-90L | Resin Chemicals Co., Ltd. | Refined Rosin Modified Resin GE-90L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 87-93°C. This product is comm...展开 Refined Rosin Modified Resin GE-90L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 87-93°C. This product is commonly used in the production and manufacturing of hot melt adhesives, pressure sensitive adhesives, and high class glues. 收起 | |
| Refined Rosin Modified Resin PE-100L | Resin Chemicals Co., Ltd. | Refined Rosin Modified Resin PE-100L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 97-103°C. This product is co...展开 Refined Rosin Modified Resin PE-100L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 97-103°C. This product is commonly used in the production and manufacturing of hot melt adhesives, pressure sensitive adhesives, and high class glues. 收起 | |
| Refined Rosin Modified Resin PE-105L | Resin Chemicals Co., Ltd. | Refined Rosin Modified Resin PE-105L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 102-108°C. This product is c...展开 Refined Rosin Modified Resin PE-105L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 102-108°C. This product is commonly used in the production and manufacturing of hot melt adhesives, pressure sensitive adhesives, and high class glues. 收起 | |
| Refined Rosin Modified Resin PE-95L | Resin Chemicals Co., Ltd. | Refined Rosin Modified Resin PE-95L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 92-98°C. This product is comm...展开 Refined Rosin Modified Resin PE-95L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 92-98°C. This product is commonly used in the production and manufacturing of hot melt adhesives, pressure sensitive adhesives, and high class glues. 收起 | |
| Rosin Modified Maleic Resin MR-130 | Resin Chemicals Co., Ltd. | Rosin Modified Maleic Resin MR-130 is a raw material that is esterified by the addition of gum rosin, maleic anhydride, glycerol or pentaerythritol. It is transparent to pale yellow flakes in appearance with a Gardner grade color of 3-4. This product is u...展开 Rosin Modified Maleic Resin MR-130 is a raw material that is esterified by the addition of gum rosin, maleic anhydride, glycerol or pentaerythritol. It is transparent to pale yellow flakes in appearance with a Gardner grade color of 3-4. This product is used to provide light color production and retention in nitrocellulose lacquers and inks. 收起 | |
| Rosin Modified Maleic Resin MR-130D | Resin Chemicals Co., Ltd. | Rosin Modified Maleic Resin MR-130D is a raw material that is esterified by the addition of gum rosin, maleic anhydride, glycerol or pentaerythritol. It is transparent to pale yellow flakes in appearance with a Gardner grade color of 5-8. This product is ...展开 Rosin Modified Maleic Resin MR-130D is a raw material that is esterified by the addition of gum rosin, maleic anhydride, glycerol or pentaerythritol. It is transparent to pale yellow flakes in appearance with a Gardner grade color of 5-8. This product is used to provide light color production and retention in nitrocellulose lacquers and inks. 收起 | |
| Rosin Modified Maleic Resin MR115R | Resin Chemicals Co., Ltd. | Rosin Modified Maleic Resin MR115R is a solid adduct of gum rosin and maleic anhydride created through the esterification of glycerol. It is pale, yellow solid flakes in appearance with a softening point of 112-117°C. This product is commonly used to prov...展开 Rosin Modified Maleic Resin MR115R is a solid adduct of gum rosin and maleic anhydride created through the esterification of glycerol. It is pale, yellow solid flakes in appearance with a softening point of 112-117°C. This product is commonly used to provide resistance to abrasion, crocking, and crushing while providing leveling and fast drying in traffic marking paints. 收起 | |
| Rosin Modified Maleic Resin MR120R | Resin Chemicals Co., Ltd. | Rosin Modified Maleic Resin MR120R is a solid adduct of gum rosin and maleic anhydride created through the esterification of glycerol. It is pale, yellow solid flakes in appearance with a softening point of 117-123°C. This product is commonly used to prov...展开 Rosin Modified Maleic Resin MR120R is a solid adduct of gum rosin and maleic anhydride created through the esterification of glycerol. It is pale, yellow solid flakes in appearance with a softening point of 117-123°C. This product is commonly used to provide resistance to abrasion, crocking, and crushing while providing leveling and fast drying in traffic marking paints. 收起 | |
| Rosin Modified Maleic Resin MR125R | Resin Chemicals Co., Ltd. | Rosin Modified Maleic Resin MR125R is a solid adduct of gum rosin and maleic anhydride created through the esterification of glycerol. It is pale, yellow solid flakes in appearance with a softening point of 122-128°C. This product is commonly used to prov...展开 Rosin Modified Maleic Resin MR125R is a solid adduct of gum rosin and maleic anhydride created through the esterification of glycerol. It is pale, yellow solid flakes in appearance with a softening point of 122-128°C. This product is commonly used to provide resistance to abrasion, crocking, and crushing while providing leveling and fast drying in traffic marking paints. 收起 | |
| Rosin Modified Phenolic Resin PI116 | Resin Chemicals Co., Ltd. | Rosin Modified Phenolic Resin PI116 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 1500-2200 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展开 Rosin Modified Phenolic Resin PI116 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 1500-2200 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起 | |
| Rosin Modified Phenolic Resin PI118 | Resin Chemicals Co., Ltd. | Rosin Modified Phenolic Resin PI118 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 2000-2800 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展开 Rosin Modified Phenolic Resin PI118 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 2000-2800 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起 | |
| Rosin Modified Phenolic Resin PI136 | Resin Chemicals Co., Ltd. | Rosin Modified Phenolic Resin PI136 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 1600-2500 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展开 Rosin Modified Phenolic Resin PI136 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 1600-2500 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起 | |
| Rosin Modified Phenolic Resin PI138 | Resin Chemicals Co., Ltd. | Rosin Modified Phenolic Resin PI138 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 2400-3200 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展开 Rosin Modified Phenolic Resin PI138 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 2400-3200 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起 |
