| Polytone PA 303 | Polyols and Polymers | Polytone PA 303 is a polymeric fatty acid based polyamide resin. This product is a bright light yellow color co-solvent resin that comes in broken lumps. It is non-reactive polyamide resin in a solid form that is resistance to grease and water, it also pr...展开 Polytone PA 303 is a polymeric fatty acid based polyamide resin. This product is a bright light yellow color co-solvent resin that comes in broken lumps. It is non-reactive polyamide resin in a solid form that is resistance to grease and water, it also provides a glossy finish. This product provides adhesion to treated polyethylene and other plastics. Polytone PA 303 is primarily used for flexographic and gravure printing inks. Polytone PA 303 is compatible with ketonic, maleic, reduced phenolic and pure phenolic resins. However,compatibility with alkyds is only partial. Compatibility of Polytone PA 303 with nitrocellulose is much improved as compared to that of & Polytone PA 302 收起 | |
| Polytone PA 351 | Polyols and Polymers | Polytone PA 351 is a polymeric fatty acid based polyamide resin. This product is a bright light yellow color spirit soluble resin that comes in broken lumps. It is non-reactive polyamide resin in a solid form that provides adhesion many different substrat...展开 Polytone PA 351 is a polymeric fatty acid based polyamide resin. This product is a bright light yellow color spirit soluble resin that comes in broken lumps. It is non-reactive polyamide resin in a solid form that provides adhesion many different substrates and solvent release properties with low odor. Polytone PA 351 is primarily used for flexographic and gravure printing inks. Polytone PA 351 shows excellent solubility in a variety of solvents that don’t attack rubber stereos. Under certain conditions the solutions forms reversible gels on standing and to avoid this, it is recommended to add small percentage of water or higher alcohols or aromatic hydrocarbon solvent. Polytone PA 351 has infinite solubility in ethanol and higher alcohols. It is soluble in methanol at higher concentrations – 40% and above. 收起 | |
| Polytone PF 201 | Polyols and Polymers | Polytone PF 201 is phenol formaldehyde two-step resin containing HEXA and is part of the alkyl phenol family of organic compounds. This product is a dry pale yellow powder that is designed to be used as an additive in grinding materials, molding compounds...展开 Polytone PF 201 is phenol formaldehyde two-step resin containing HEXA and is part of the alkyl phenol family of organic compounds. This product is a dry pale yellow powder that is designed to be used as an additive in grinding materials, molding compounds and as an additive in paintings and coatings. 收起 | |
| Quartz Sand | BassTech International | Quartz Sand is specially designed to add functionality and durability while decreasing the use of expensive resins. This product is used in paint, coatings, and inks, and works well with binders and other additives. | |
| Refined Gum Rosin | Resin Chemicals Co., Ltd. | Refined Gum Rosin is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a light colored, transparent solid in appearance with a softening point of 76°C. This product is used to provide special chemical act...展开 Refined Gum Rosin is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a light colored, transparent solid in appearance with a softening point of 76°C. This product is used to provide special chemical activity in the production of coatings, inks, and rosin ester resins. 收起 | |
| Refined Rosin Modified Resin GE-85L | Resin Chemicals Co., Ltd. | Refined Rosin Modified Resin GE-85L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 85-88°C. This product is comm...展开 Refined Rosin Modified Resin GE-85L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 85-88°C. This product is commonly used in the production and manufacturing of hot melt adhesives, pressure sensitive adhesives, and high class glues. 收起 | |
| Refined Rosin Modified Resin GE-90L | Resin Chemicals Co., Ltd. | Refined Rosin Modified Resin GE-90L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 87-93°C. This product is comm...展开 Refined Rosin Modified Resin GE-90L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 87-93°C. This product is commonly used in the production and manufacturing of hot melt adhesives, pressure sensitive adhesives, and high class glues. 收起 | |
| Refined Rosin Modified Resin PE-100L | Resin Chemicals Co., Ltd. | Refined Rosin Modified Resin PE-100L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 97-103°C. This product is co...展开 Refined Rosin Modified Resin PE-100L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 97-103°C. This product is commonly used in the production and manufacturing of hot melt adhesives, pressure sensitive adhesives, and high class glues. 收起 | |
| Refined Rosin Modified Resin PE-105L | Resin Chemicals Co., Ltd. | Refined Rosin Modified Resin PE-105L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 102-108°C. This product is c...展开 Refined Rosin Modified Resin PE-105L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 102-108°C. This product is commonly used in the production and manufacturing of hot melt adhesives, pressure sensitive adhesives, and high class glues. 收起 | |
| Refined Rosin Modified Resin PE-95L | Resin Chemicals Co., Ltd. | Refined Rosin Modified Resin PE-95L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 92-98°C. This product is comm...展开 Refined Rosin Modified Resin PE-95L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 92-98°C. This product is commonly used in the production and manufacturing of hot melt adhesives, pressure sensitive adhesives, and high class glues. 收起 | |
| Rosin Modified Maleic Resin MR-130 | Resin Chemicals Co., Ltd. | Rosin Modified Maleic Resin MR-130 is a raw material that is esterified by the addition of gum rosin, maleic anhydride, glycerol or pentaerythritol. It is transparent to pale yellow flakes in appearance with a Gardner grade color of 3-4. This product is u...展开 Rosin Modified Maleic Resin MR-130 is a raw material that is esterified by the addition of gum rosin, maleic anhydride, glycerol or pentaerythritol. It is transparent to pale yellow flakes in appearance with a Gardner grade color of 3-4. This product is used to provide light color production and retention in nitrocellulose lacquers and inks. 收起 | |
| Rosin Modified Maleic Resin MR-130D | Resin Chemicals Co., Ltd. | Rosin Modified Maleic Resin MR-130D is a raw material that is esterified by the addition of gum rosin, maleic anhydride, glycerol or pentaerythritol. It is transparent to pale yellow flakes in appearance with a Gardner grade color of 5-8. This product is ...展开 Rosin Modified Maleic Resin MR-130D is a raw material that is esterified by the addition of gum rosin, maleic anhydride, glycerol or pentaerythritol. It is transparent to pale yellow flakes in appearance with a Gardner grade color of 5-8. This product is used to provide light color production and retention in nitrocellulose lacquers and inks. 收起 | |
| Rosin Modified Maleic Resin MR115R | Resin Chemicals Co., Ltd. | Rosin Modified Maleic Resin MR115R is a solid adduct of gum rosin and maleic anhydride created through the esterification of glycerol. It is pale, yellow solid flakes in appearance with a softening point of 112-117°C. This product is commonly used to prov...展开 Rosin Modified Maleic Resin MR115R is a solid adduct of gum rosin and maleic anhydride created through the esterification of glycerol. It is pale, yellow solid flakes in appearance with a softening point of 112-117°C. This product is commonly used to provide resistance to abrasion, crocking, and crushing while providing leveling and fast drying in traffic marking paints. 收起 | |
| Rosin Modified Maleic Resin MR120R | Resin Chemicals Co., Ltd. | Rosin Modified Maleic Resin MR120R is a solid adduct of gum rosin and maleic anhydride created through the esterification of glycerol. It is pale, yellow solid flakes in appearance with a softening point of 117-123°C. This product is commonly used to prov...展开 Rosin Modified Maleic Resin MR120R is a solid adduct of gum rosin and maleic anhydride created through the esterification of glycerol. It is pale, yellow solid flakes in appearance with a softening point of 117-123°C. This product is commonly used to provide resistance to abrasion, crocking, and crushing while providing leveling and fast drying in traffic marking paints. 收起 | |
| Rosin Modified Maleic Resin MR125R | Resin Chemicals Co., Ltd. | Rosin Modified Maleic Resin MR125R is a solid adduct of gum rosin and maleic anhydride created through the esterification of glycerol. It is pale, yellow solid flakes in appearance with a softening point of 122-128°C. This product is commonly used to prov...展开 Rosin Modified Maleic Resin MR125R is a solid adduct of gum rosin and maleic anhydride created through the esterification of glycerol. It is pale, yellow solid flakes in appearance with a softening point of 122-128°C. This product is commonly used to provide resistance to abrasion, crocking, and crushing while providing leveling and fast drying in traffic marking paints. 收起 | |
| Rosin Modified Phenolic Resin PI116 | Resin Chemicals Co., Ltd. | Rosin Modified Phenolic Resin PI116 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 1500-2200 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展开 Rosin Modified Phenolic Resin PI116 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 1500-2200 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起 | |
| Rosin Modified Phenolic Resin PI118 | Resin Chemicals Co., Ltd. | Rosin Modified Phenolic Resin PI118 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 2000-2800 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展开 Rosin Modified Phenolic Resin PI118 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 2000-2800 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起 | |
| Rosin Modified Phenolic Resin PI136 | Resin Chemicals Co., Ltd. | Rosin Modified Phenolic Resin PI136 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 1600-2500 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展开 Rosin Modified Phenolic Resin PI136 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 1600-2500 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起 | |
| Rosin Modified Phenolic Resin PI138 | Resin Chemicals Co., Ltd. | Rosin Modified Phenolic Resin PI138 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 2400-3200 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展开 Rosin Modified Phenolic Resin PI138 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 2400-3200 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起 | |
| Rosin Modified Phenolic Resin PI142 | Resin Chemicals Co., Ltd. | Rosin Modified Phenolic Resin PI142 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 1500-2500 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展开 Rosin Modified Phenolic Resin PI142 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 1500-2500 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起 | |
| Rosin Modified Phenolic Resin PI145 | Resin Chemicals Co., Ltd. | Rosin Modified Phenolic Resin PI145 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 500-900 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used...展开 Rosin Modified Phenolic Resin PI145 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 500-900 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起 | |
| Rosin Modified Phenolic Resin PI146 | Resin Chemicals Co., Ltd. | Rosin Modified Phenolic Resin PI146 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 1300-1800 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展开 Rosin Modified Phenolic Resin PI146 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 1300-1800 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起 | |
| Rosin Modified Phenolic Resin PI147 | Resin Chemicals Co., Ltd. | Rosin Modified Phenolic Resin PI147 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 5500-8500 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展开 Rosin Modified Phenolic Resin PI147 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 5500-8500 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起 | |
| Rosin Modified Phenolic Resin PI148 | Resin Chemicals Co., Ltd. | Rosin Modified Phenolic Resin PI148 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 3500-5000 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展开 Rosin Modified Phenolic Resin PI148 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 3500-5000 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起 | |
| Rosin Modified Phenolic Resin PI149 | Resin Chemicals Co., Ltd. | Rosin Modified Phenolic Resin PI149 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 3000-4500 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展开 Rosin Modified Phenolic Resin PI149 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 3000-4500 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起 | |
| Rosin Modified Phenolic Resin PI152 | Resin Chemicals Co., Ltd. | Rosin Modified Phenolic Resin PI152 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 3800-5000 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展开 Rosin Modified Phenolic Resin PI152 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 3800-5000 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起 | |
| Rosin Modified Phenolic Resin PI155 | Resin Chemicals Co., Ltd. | Rosin Modified Phenolic Resin PI155 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 1800-2500 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展开 Rosin Modified Phenolic Resin PI155 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 1800-2500 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起 | |
| Rosin Modified Phenolic Resin PI160 | Resin Chemicals Co., Ltd. | Rosin Modified Phenolic Resin PI160 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 10000-14000 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly ...展开 Rosin Modified Phenolic Resin PI160 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 10000-14000 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起 | |
| Rosin Modified Resin GE85 | Resin Chemicals Co., Ltd. | Rosin Modified Resin GE85 is a glycerol ester of gum rosin that is esterified by gum rosin and glycerol or pertaerythrite. It is a slightly yellow to transparent flake or bead in appearance with a softening point of 85-89°C. This product is commonly used ...展开 Rosin Modified Resin GE85 is a glycerol ester of gum rosin that is esterified by gum rosin and glycerol or pertaerythrite. It is a slightly yellow to transparent flake or bead in appearance with a softening point of 85-89°C. This product is commonly used as a raw material in applications such as hot melt adhesives, pressure sensitive adhesives, and glue. 收起 | |
| Rosin Modified Resin GE90 | Resin Chemicals Co., Ltd. | Rosin Modified Resin GE90 is a glycerol ester of gum rosin that is esterified by gum rosin and glycerol or pertaerythrite. It is a slightly yellow to transparent flake or bead in appearance with a softening point of 88-92°C. This product is commonly used ...展开 Rosin Modified Resin GE90 is a glycerol ester of gum rosin that is esterified by gum rosin and glycerol or pertaerythrite. It is a slightly yellow to transparent flake or bead in appearance with a softening point of 88-92°C. This product is commonly used as a raw material in applications such as hot melt adhesives, pressure sensitive adhesives, and glue. 收起 | |
| Rosin Modified Resin PE 105 | Resin Chemicals Co., Ltd. | Rosin Modified Resin PE105 is a glycerol ester of gum rosin that is esterified by gum rosin and glycerol or pertaerythrite. It is a slightly yellow to transparent flake or bead in appearance with a softening point of 103-107°C. This product is commonly us...展开 Rosin Modified Resin PE105 is a glycerol ester of gum rosin that is esterified by gum rosin and glycerol or pertaerythrite. It is a slightly yellow to transparent flake or bead in appearance with a softening point of 103-107°C. This product is commonly used as a raw material in applications such as hot melt adhesives, pressure sensitive adhesives, and glue. 收起 | |
| Rosin Modified Resin PE100 | Resin Chemicals Co., Ltd. | Rosin Modified Resin PE100 is a glycerol ester of gum rosin that is esterified by gum rosin and glycerol or pertaerythrite. It is a slightly yellow to transparent flake or bead in appearance with a softening point of 98-102°C. This product is commonly use...展开 Rosin Modified Resin PE100 is a glycerol ester of gum rosin that is esterified by gum rosin and glycerol or pertaerythrite. It is a slightly yellow to transparent flake or bead in appearance with a softening point of 98-102°C. This product is commonly used as a raw material in applications such as hot melt adhesives, pressure sensitive adhesives, and glue. 收起 | |
| Rosin Modified Resin PE95 | Resin Chemicals Co., Ltd. | Rosin Modified Resin PE95 is a glycerol ester of gum rosin that is esterified by gum rosin and glycerol or pertaerythrite. It is a slightly yellow to transparent flake or bead in appearance with a softening point of 93-97°C. This product is commonly used ...展开 Rosin Modified Resin PE95 is a glycerol ester of gum rosin that is esterified by gum rosin and glycerol or pertaerythrite. It is a slightly yellow to transparent flake or bead in appearance with a softening point of 93-97°C. This product is commonly used as a raw material in applications such as hot melt adhesives, pressure sensitive adhesives, and glue. 收起 | |
| Strontium Chromate | BassTech International | Strontium Chromate is a yellow powder which is used as an anti-corrosive pigment in paint, coatings, and inks. | |
| Terpene Resin 105 | Resin Chemicals Co., Ltd. | Terpene Resin 105 is a raw material created from aluminum trichloride and α-Pinene that appears as a pale yellow, transparent solid. It has a softening point of 100-110°C and contains a maximum impurity level of 30ppm. This product is commonly used in the...展开 Terpene Resin 105 is a raw material created from aluminum trichloride and α-Pinene that appears as a pale yellow, transparent solid. It has a softening point of 100-110°C and contains a maximum impurity level of 30ppm. This product is commonly used in the manufacturing of hot melt adhesives, pressure sensitive adhesives, and glue. 收起 | |
| Terpene Resin 115 | Resin Chemicals Co., Ltd. | Terpene Resin 115 is a raw material created from aluminum trichloride and α-Pinene that appears as a pale yellow, transparent solid. It has a softening point of 110-120°C and contains a maximum impurity level of 30ppm. This product is commonly used in the...展开 Terpene Resin 115 is a raw material created from aluminum trichloride and α-Pinene that appears as a pale yellow, transparent solid. It has a softening point of 110-120°C and contains a maximum impurity level of 30ppm. This product is commonly used in the manufacturing of hot melt adhesives, pressure sensitive adhesives, and glue. 收起 | |
| Terpene Resin 85 | Resin Chemicals Co., Ltd. | Terpene Resin 85 is a raw material created from aluminum trichloride and α-Pinene that appears as a pale yellow, transparent solid. It has a softening point of 80-90°C and contains a maximum impurity level of 30ppm. This product is commonly used in the ma...展开 Terpene Resin 85 is a raw material created from aluminum trichloride and α-Pinene that appears as a pale yellow, transparent solid. It has a softening point of 80-90°C and contains a maximum impurity level of 30ppm. This product is commonly used in the manufacturing of hot melt adhesives, pressure sensitive adhesives, and glue. 收起 | |
| Terpene Resin 95 | Resin Chemicals Co., Ltd. | Terpene Resin 95 is a raw material created from aluminum trichloride and α-Pinene that appears as a pale yellow, transparent solid. It has a softening point of 90-100°C and contains a maximum impurity level of 30ppm. This product is commonly used in the m...展开 Terpene Resin 95 is a raw material created from aluminum trichloride and α-Pinene that appears as a pale yellow, transparent solid. It has a softening point of 90-100°C and contains a maximum impurity level of 30ppm. This product is commonly used in the manufacturing of hot melt adhesives, pressure sensitive adhesives, and glue. 收起 | |
| Thermoplastic Road Marking Resin RM-100 | Resin Chemicals Co., Ltd. | Thermoplastic Road Marking Resin RM-100 is a raw material produced from gum rosin that is used to provide light color and moderate softening, UV absorption, light stability, and actualization for light screen in thermoplastic road marking paints. This pro...展开 Thermoplastic Road Marking Resin RM-100 is a raw material produced from gum rosin that is used to provide light color and moderate softening, UV absorption, light stability, and actualization for light screen in thermoplastic road marking paints. This product is pale yellow beads in appearance with a softening point of 97-103°C. 收起 | |
| Thermoplastic Road Marking Resin RM-105 | Resin Chemicals Co., Ltd. | Thermoplastic Road Marking Resin RM-105 is a raw material produced from gum rosin that is used to provide light color and moderate softening, UV absorption, light stability, and actualization for light screen in thermoplastic road marking paints. This pro...展开 Thermoplastic Road Marking Resin RM-105 is a raw material produced from gum rosin that is used to provide light color and moderate softening, UV absorption, light stability, and actualization for light screen in thermoplastic road marking paints. This product is pale yellow beads in appearance with a softening point of 102-108°C. 收起 | |
| Thermoplastic Road Marking Resin RM-110 | Resin Chemicals Co., Ltd. | Thermoplastic Road Marking Resin RM-110 is a raw material produced from gum rosin that is used to provide light color and moderate softening, UV absorption, light stability, and actualization for light screen in thermoplastic road marking paints. This pro...展开 Thermoplastic Road Marking Resin RM-110 is a raw material produced from gum rosin that is used to provide light color and moderate softening, UV absorption, light stability, and actualization for light screen in thermoplastic road marking paints. This product is pale yellow beads in appearance with a softening point of 107-113°C. 收起 | |
| Thermoplastic Road Marking Resin RM-95 | Resin Chemicals Co., Ltd. | Thermoplastic Road Marking Resin RM-95 is a raw material produced from gum rosin that is used to provide light color and moderate softening, UV absorption, light stability, and actualization for light screen in thermoplastic road marking paints. This prod...展开 Thermoplastic Road Marking Resin RM-95 is a raw material produced from gum rosin that is used to provide light color and moderate softening, UV absorption, light stability, and actualization for light screen in thermoplastic road marking paints. This product is pale yellow beads in appearance with a softening point of 92-98°C. 收起 | |
| Titanium Dioxide | BassTech International | Titanium Dioxide is the naturally occurring oxide of titanium which has a white appearance. This product is primarily used for coatings and glass, but may also be used in paint and inks. | |
| Turpentine Oil 1st | Resin Chemicals Co., Ltd. | Turpentine Oil 1st is pinene with special chemical composition that is primarily used as a solvent. It is transparent in appearance with a maximum relative density of 0.88. This product is commonly used in the manufacturing of applications such as coating...展开 Turpentine Oil 1st is pinene with special chemical composition that is primarily used as a solvent. It is transparent in appearance with a maximum relative density of 0.88. This product is commonly used in the manufacturing of applications such as coatings, synthetic camphor, synthetic resin, and organic industrial products. 收起 | |
| Turpentine Oil Super | Resin Chemicals Co., Ltd. | Turpentine Oil Super is pinene with special chemical composition that is primarily used as a solvent. It is transparent in appearance with a maximum relative density of 0.87. This product is commonly used in the manufacturing of applications such as coati...展开 Turpentine Oil Super is pinene with special chemical composition that is primarily used as a solvent. It is transparent in appearance with a maximum relative density of 0.87. This product is commonly used in the manufacturing of applications such as coatings, synthetic camphor, synthetic resin, and organic industrial products. 收起 | |
| Waterborne Emulsion Rosin Ester WBE138 | Resin Chemicals Co., Ltd. | Waterborne Emulsion Rosin Ester WBE138 is a unique waterborne tackifier that combines high solids content and high adhesion performance and stability at high speed. This product is commonly used in applications such as water-based adhesives and glue. It c...展开 Waterborne Emulsion Rosin Ester WBE138 is a unique waterborne tackifier that combines high solids content and high adhesion performance and stability at high speed. This product is commonly used in applications such as water-based adhesives and glue. It can provide aggressive tack and peel, and give a unique balance of room temperature and low temperature adhesion in pressure sensitive adhesives. 收起 | |
| Zinc Chromate | BassTech International | Zinc Chromate is a yellow-green crystal to yellow powder which is used as an anti-corrosive pigment in paint, coatings, and inks. | |
| Zinc Phosphate | BassTech International | Zinc Phosphate is a white crystal material which is used as an anti-corrosive pigment in paint, coatings, and inks. | |
| Zinc Stearate | BassTech International | Zinc Stearate is a powerful mold release agent which appears as a white powder or flakes. This product provides a hydrophobic effect to paint, coatings and inks. | |
| Zinc Tetroxy Chromate | BassTech International | Zinc Tetroxy Chromate is a yellow-green crystal to yellow powder which is used as an anti-corrosive pigment in paint, coatings, and inks. | |
| Automated Discharge Systems | Charles Ross & Son Company | 该Ross排水系统能消除浪费在刮檫来源于混合的重垢或粘性的物质的时间。加装了简捷按钮后，该设施可以在几分钟内将1000加仑每批次的废水装进散装箱内，灌装箱内或者包装设备内，一个挤压机或者两到三个辊压机。 |  |
| Double Planetary Mixer | Charles Ross & Son Company | Ross 60多年以前就已倡导并设计了双重行星式混合器。通过不断的升级改造，这种混合器能够用于粘度高达7,000,000厘泊的产品。并可以根据要求，设计更高速度的混合器。 |  |
| High Shear Mixer | Charles Ross & Son Company | 所有的转子/定子都是由一个固定在定子上的高速转子组成的。在一个单元中，转子包括单独的四片叶子。当旋转叶片通过每一个开着的定子的时候，他们机械的剪切微粒或液滴，在高速下将物质驱开到周围的混合器中，带来极大的压力。 |  |
| High Speed Disperser | Charles Ross & Son Company | ROSS 高速分散机以其耐用、分散速度快和维护成本低的特点成为行业标杆。标准配置包括：防爆装置，变频重型电动机，重型三角皮带传动器和轴承，安全开关，一个带手/足控制的气/油液压升降机，以及不锈钢接液部件和轴承防护罩。设备大小从1/2HP到200HP不等，处理能力分别达到1-200加仑。并可根据客户需求定制。 |  |
| Multi-Shaft Mixer | Charles Ross & Son Company | 我们提供双轴和三轴搅拌机以满足您的特定工艺需求。其中经济型的双轴搅拌机包括一个常规高速分散头和一个双翼锚式搅拌桨。这样的构造适用于简单的分散和搅拌。 |  |
| Planetary Dispersers | Charles Ross & Son Company | 一款结合了行星式叶片和高速分散叶片的专利行星式分散器。行星式和高速分散叶片既绕轴旋转，也绕容器不断旋转。 行星式叶片可将物料直接送入高速轨道分散器的高剪切区。 这种独特的搅拌组合，可以淘汰对于多重搅拌器的需要，即一台机器，两种技术。 |  |
| Powder Induction | Charles Ross & Son Company | 所有的转子/定子都是由一个固定在定子上的高速转子组成的。在一个单元中，转子包括单独的四片叶子。当旋转叶片通过每一个开着的定子的时候，他们机械的剪切微粒或液滴，在高速下将物质驱开到周围的混合器中，带来极大的压力。 |  |
| PreMax | Charles Ross & Son Company | 这种单极转子/定子发电机是在间隙式搅拌设备中产生高剪切和蓬勃流的理想之选。Ross PreMax 采用这种Delta转子/定子，能够制造一种机械，液压与气穴剪切的强力结合，从而 产生强劲的松团作用，特别适合颜料的分散。 |  |
| Ribbon Blender | Charles Ross & Son Company | Ribbon 混合器非常适用于粉类产品的混合。双向的ribbon搅拌器可在很短的时间内带来极致的混合。Ross可提供1-100立方英尺的工作量的Ribbon搅拌器。 |  |
| Sanitary Mixers | Charles Ross & Son Company | Ross公司几乎服务于全球每一工业化国家的食品，化妆品和药物领域。我们有着其它特种混合设备制造商难以企及的丰富经验和产能。 |  |
| Static/Motionless Mixers | Charles Ross & Son Company | RossLPD/LLPD(低压降）和ISG（界面表面发生器）静态混合器由于在湍流和层流混合应用领域的广泛使用而闻名。 |  |
| Systems And Controls | Charles Ross & Son Company | Ross 系统和控制（SynCon）是全球领先的控制系统供应商。我们供应从简单的开/关切换，到精细的基于菜单系统的PLC程序包。无论是标准或自定义，每一系统，都是专为满足客户具体需求而设。 |  |
| Three Roll Mill | Charles Ross & Son Company | 80多年前，ROSS创造出第一台三辊研磨机，带来革命性的颜料分散技术，使得分散料体的一致性和精细度达到前所未有的程度。如今，这种三辊研磨机依然是同类产品中的行业标杆，在诸如磁性涂料，化妆品，油漆，油墨和高品质陶瓷行业中有着广泛应用。 |  |
| Tumble Blenders | Charles Ross & Son Company | Ross 滚筒混合器具有大量的标准功能特点，包括：316-不锈钢双锥形设计，手动蝶阀设计达到放电 - 24”放电间隙，铰链式不锈钢加料口，内部表面进行了镜面抛光，外表面150磨砂处理，而对于非不锈钢组件，使用持久的双组分油漆涂装。 |  |
| Vertical Blender | Charles Ross & Son Company | 当你的产品对剪切敏感，或者工艺参数要求比较苛刻时，Ross 立式混合器是一款设计优越的替换方案。是那些要求最小混合影响产品的最佳选择。在同样的工作容积中，慢速旋转混合的动作要远比螺条混合器中的搅拌温和。 |  |
