| Alcohol Soluble Maleic Resin WMR110 | Resin Chemicals Co., Ltd. | Alcohol Soluble Maleic Resin WMR110 is a raw material created from modified maleic resins through the esterification of polyalcohol. It is a bead or flake in appearance with a softening point of 100-120°C. This product is commonly used to provide high glo...展开 Alcohol Soluble Maleic Resin WMR110 is a raw material created from modified maleic resins through the esterification of polyalcohol. It is a bead or flake in appearance with a softening point of 100-120°C. This product is commonly used to provide high gloss and fast drying in alcohol soluble printing inks and water-based inks. 收起 | |
| Alcohol Soluble Maleic Resin WMR130 | Resin Chemicals Co., Ltd. | Alcohol Soluble Maleic Resin WMR130 is a raw material created from modified maleic resins through the esterification of polyalcohol. It is a bead or flake in appearance with a softening point of 120-140°C. This product is commonly used to provide high glo...展开 Alcohol Soluble Maleic Resin WMR130 is a raw material created from modified maleic resins through the esterification of polyalcohol. It is a bead or flake in appearance with a softening point of 120-140°C. This product is commonly used to provide high gloss and fast drying in alcohol soluble printing inks and water-based inks. 收起 | |
| Alcohol Soluble Maleic Resin WMR150 | Resin Chemicals Co., Ltd. | Alcohol Soluble Maleic Resin WMR150 is a raw material created from modified maleic resins through the esterification of polyalcohol. It is a bead or flake in appearance with a softening point of 140-150°C. This product is commonly used to provide high glo...展开 Alcohol Soluble Maleic Resin WMR150 is a raw material created from modified maleic resins through the esterification of polyalcohol. It is a bead or flake in appearance with a softening point of 140-150°C. This product is commonly used to provide high gloss and fast drying in alcohol soluble printing inks and water-based inks. 收起 | |
| Alpha-Rez™ 3500 E | Lawter | Alpha-Rez™ 3500 E is a low viscous, modified hydrocarbon resin that has high solubility and displays a good gel response to aluminum gelling agents. It also has a lower water pick-up and functions as a water balance regulator. The product has ideal pigmen...展开 Alpha-Rez™ 3500 E is a low viscous, modified hydrocarbon resin that has high solubility and displays a good gel response to aluminum gelling agents. It also has a lower water pick-up and functions as a water balance regulator. The product has ideal pigment wetting properties causing inks to display a higher gloss. It is used in offset, grinding varnishes and letterpress applications. 收起 | |
| Alpha-Rez™ 9250 E | Lawter | Alpha-Rez™ 9250 E is a hybrid resin composed of visco-elastic hydrocarbons and hybrid resins that display a high viscosity and medium solubility. The product has good water balance, low misting and low tack properties. It can be used in offset inks using ...展开 Alpha-Rez™ 9250 E is a hybrid resin composed of visco-elastic hydrocarbons and hybrid resins that display a high viscosity and medium solubility. The product has good water balance, low misting and low tack properties. It can be used in offset inks using fast-running printing processes. 收起 | |
| Decotherm™ 260 E | Lawter | Decotherm™ 260 E is a polyester resin dissolved in tripropylene glycol that has the benefit of high pigment wetting, gloss, flow and transfer on high speed presses. It also has good adhesion to metals which is why it is considered ideal for use in metal d...展开 Decotherm™ 260 E is a polyester resin dissolved in tripropylene glycol that has the benefit of high pigment wetting, gloss, flow and transfer on high speed presses. It also has good adhesion to metals which is why it is considered ideal for use in metal deco inks. Such inks use the spindle printing or dry offset system of printing on 2-piece cans. 收起 | |
| Decotherm™ 290 E | Lawter | Decotherm™ 290 E is a structured polyester resin that has low tack and misting properties, shows good transfer on high speed presses and displays adhesion to metals. It is used in metal deco inks using the spindle printing or dry offset method for 2-piece...展开 Decotherm™ 290 E is a structured polyester resin that has low tack and misting properties, shows good transfer on high speed presses and displays adhesion to metals. It is used in metal deco inks using the spindle printing or dry offset method for 2-piece cans. It shows good color retention and is also used in white and colored ink applications. 收起 | |
| Disproportionated Rosin 1st Grade | Resin Chemicals Co., Ltd. | Disproportionated Rosin 1st Grade is a raw material produced by isomerizing gum rosin with a catalyst. This product is commonly used as a polymer emulsification agent in the production of water-soluble pressure sensitive adhesives. It has a maximum abieti...展开 Disproportionated Rosin 1st Grade is a raw material produced by isomerizing gum rosin with a catalyst. This product is commonly used as a polymer emulsification agent in the production of water-soluble pressure sensitive adhesives. It has a maximum abietic acid content of 0.5% and a softening point of 76°C. 收起 | |
| Disproportionated Rosin Extra Grade | Resin Chemicals Co., Ltd. | Disproportionated Rosin Extra Grade is a raw material produced by isomerizing gum rosin with a catalyst. This product is commonly used as a polymer emulsification agent in the production of water-soluble pressure sensitive adhesives. It has a maximum abie...展开 Disproportionated Rosin Extra Grade is a raw material produced by isomerizing gum rosin with a catalyst. This product is commonly used as a polymer emulsification agent in the production of water-soluble pressure sensitive adhesives. It has a maximum abietic acid content of 0.1% and a softening point of 76°C. 收起 | |
| Eco-Rez™ 9710 A | Lawter | Eco-Rez™ 9710 A is a phenol formaldehyde-free resin with a low-structured rosin resin providing good pigment wetting characteristics. It is part of the family of Eco-Rez™ products offering water balance and rheological stability with sharp imprint images ...展开 Eco-Rez™ 9710 A is a phenol formaldehyde-free resin with a low-structured rosin resin providing good pigment wetting characteristics. It is part of the family of Eco-Rez™ products offering water balance and rheological stability with sharp imprint images during long and high-speed press runs. Eco-Rez™ 9710 A is ideally suited to be used in sheet-fed, heatset and coldset applications. 收起 | |
| Eco-Rez™ 9730 A | Lawter | Eco-Rez™ 9730 A is a phenol formaldehyde-free resin that is part of a new generation of resins with greater rheological stability, sharp imprint images and water balance stability during long and high-speed press runs. Unlike prior phenol-free resins, the...展开 Eco-Rez™ 9730 A is a phenol formaldehyde-free resin that is part of a new generation of resins with greater rheological stability, sharp imprint images and water balance stability during long and high-speed press runs. Unlike prior phenol-free resins, the product provides a more sustainable chemistry option with improved levels of performance. Eco-Rez™ 9730 A is used in all offset inks including coldset, heatset and sheet-fed applications. 收起 | |
| Eco-Rez™ 9760 A | Lawter | Eco-Rez™ 9760 A is a phenol formaldehyde-free resin that provides an increased level of renewable content in line with a more sustainable approach to chemistry formulations. As part of the new products in the Eco-Rez™ line, the resin offers sharper print ...展开 Eco-Rez™ 9760 A is a phenol formaldehyde-free resin that provides an increased level of renewable content in line with a more sustainable approach to chemistry formulations. As part of the new products in the Eco-Rez™ line, the resin offers sharper print images and better rheological stability and water balance stability during long and high-speed press runs. Eco-Rez™ 9760 A is suitable for all offset inks including coldset, heatset and sheet-fed applications. 收起 | |
| Filtrez™ 521 A | Lawter | Filtrez™ 521 A is a fumaric modified rosin ester, soluble in alcohol with a high acid value and softening point. The product's broad compatibility and solubility allow it to be an important consideration in flexographic printing inks. | |
| Filtrez™ 526 A | Lawter | Filtrez™ 526 A is a fumaric modified rosin ester that is soluble in alcohol and because it needs minimal amine due to the low acid value, it shows a faster drying time. Its high viscosity in water results in lower resin solids emerging in the final ink. F...展开 Filtrez™ 526 A is a fumaric modified rosin ester that is soluble in alcohol and because it needs minimal amine due to the low acid value, it shows a faster drying time. Its high viscosity in water results in lower resin solids emerging in the final ink. Filtrez™ 526 A is suitable for use in gravure and flexographic inks and coatings. 收起 | |
| Fluoron™ 735 A | Lawter | Fluoron™ 735 A is a blend of PTFE dispersed in a non-volatile lubricating paste in a high performance additive that gives good slip and rub. It narrows particle size distribution, has minimal effect on rheology and gloss and has good abrasion and mar resi...展开 Fluoron™ 735 A is a blend of PTFE dispersed in a non-volatile lubricating paste in a high performance additive that gives good slip and rub. It narrows particle size distribution, has minimal effect on rheology and gloss and has good abrasion and mar resistance properties. Fluoron™ 735 A is used in heatset offset inks, sheet-fed offset inks and in overprint varnishes. 收起 | |
| Gum Rosin K | Resin Chemicals Co., Ltd. | Gum Rosin K is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a yellow-red, transparent solid in appearance with a softening point of 74°C. This product is used to provide special chemical activity in ...展开 Gum Rosin K is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a yellow-red, transparent solid in appearance with a softening point of 74°C. This product is used to provide special chemical activity in the production of coatings, inks, and rosin ester resins. 收起 | |
| Gum Rosin M | Resin Chemicals Co., Ltd. | Gum Rosin M is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a yellow brown, transparent solid in appearance with a softening point of 74°C. This product is used to provide special chemical activity i...展开 Gum Rosin M is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a yellow brown, transparent solid in appearance with a softening point of 74°C. This product is used to provide special chemical activity in the production of coatings, inks, and rosin ester resins. 收起 | |
| Gum Rosin N | Resin Chemicals Co., Ltd. | Gum Rosin N is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a deep yellow, transparent solid in appearance with a softening point of 75°C. This product is used to provide special chemical activity in...展开 Gum Rosin N is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a deep yellow, transparent solid in appearance with a softening point of 75°C. This product is used to provide special chemical activity in the production of coatings, inks, and rosin ester resins. 收起 | |
| Gum Rosin WG | Resin Chemicals Co., Ltd. | Gum Rosin WG is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a yellow, transparent solid in appearance with a softening point of 75°C. This product is used to provide special chemical activity in the...展开 Gum Rosin WG is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a yellow, transparent solid in appearance with a softening point of 75°C. This product is used to provide special chemical activity in the production of coatings, inks, and rosin ester resins. 收起 | |
| Gum Rosin WW | Resin Chemicals Co., Ltd. | Gum Rosin WW is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a pale yellow, transparent solid in appearance with a softening point of 76°C. This product is used to provide special chemical activity i...展开 Gum Rosin WW is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a pale yellow, transparent solid in appearance with a softening point of 76°C. This product is used to provide special chemical activity in the production of coatings, inks, and rosin ester resins. 收起 | |
| Gum Rosin X | Resin Chemicals Co., Ltd. | Gum Rosin X is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a slightly yellow, transparent solid in appearance with a softening point of 76°C. This product is used to provide special chemical activit...展开 Gum Rosin X is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a slightly yellow, transparent solid in appearance with a softening point of 76°C. This product is used to provide special chemical activity in the production of coatings, inks, and rosin ester resins. 收起 | |
| Hydro-Rez™ 5614 A | Lawter | Hydro-Rez™ 5614 A is a fumarated modified rosin ester that can be dispersed in water with amines, ammonia or morpholine and is also soluble in alcohol. It displays fast water release in aqueous inks, exhibits good flexibility and low viscosity and its hig...展开 Hydro-Rez™ 5614 A is a fumarated modified rosin ester that can be dispersed in water with amines, ammonia or morpholine and is also soluble in alcohol. It displays fast water release in aqueous inks, exhibits good flexibility and low viscosity and its high melting point ensures good leveling and fast solvent release. The product is particularly recommended for use in flexographic inks, while also finding uses in gravure, carton and specialty inks and spirit varnishes. 收起 | |
| Hydro-Rez™ 5626 A | Lawter | Hydro-Rez™ 5626 A is a fumarated rosin ester that can be dispersed in water with morpholine, ammonia or amines and shows solubility in alcohol. A high melting point provides good leveling and fast solvent release and shows compatibility with manila resins...展开 Hydro-Rez™ 5626 A is a fumarated rosin ester that can be dispersed in water with morpholine, ammonia or amines and shows solubility in alcohol. A high melting point provides good leveling and fast solvent release and shows compatibility with manila resins, shellac and most acrylic resins and dispersions. It offers high gloss, a high softening point, flexibility and good color and odor. The product is used in gravure and flexographic inks, overprint varnishes, specialty varnishes, spirit varnishes and carton inks. 收起 | |
| Hydrocarbon DCPD Resin HSU100 | Resin Chemicals Co., Ltd. | Hydrocarbon DCPD Resin HSU100 is a water-white thermoplastic resin produced from polymerization and hydrogenation of cyclic ingredients. This product is designed to provide good heat resistance and good compatibility with base polymers. It is often used a...展开 Hydrocarbon DCPD Resin HSU100 is a water-white thermoplastic resin produced from polymerization and hydrogenation of cyclic ingredients. This product is designed to provide good heat resistance and good compatibility with base polymers. It is often used as a tackifier for hot melt adhesives, hot melt pressure sensitive adhesives, and solvent-based pressure sensitive adhesives. 收起 | |
| Hydrocarbon Resin C5 HPE100A | Resin Chemicals Co., Ltd. | Hydrocarbon Resin C5 HPE100A is a raw material designed to provide light color, heat resistance, anti-oxidant properties, and bonding strength. This product is a yellow solid with a flake or bead-like appearance and is commonly used in the manufacturing o...展开 Hydrocarbon Resin C5 HPE100A is a raw material designed to provide light color, heat resistance, anti-oxidant properties, and bonding strength. This product is a yellow solid with a flake or bead-like appearance and is commonly used in the manufacturing of hot melt adhesives, pressure sensitive adhesives, and glue. 收起 | |
| Hydrocarbon Resin C5 HPE100A-L | Resin Chemicals Co., Ltd. | Hydrocarbon Resin C5 HPE100A-L is a raw material designed to provide light color, heat resistance, anti-oxidant properties, and bonding strength. This product is a yellow solid with a flake or bead-like appearance and is commonly used in the manufacturing...展开 Hydrocarbon Resin C5 HPE100A-L is a raw material designed to provide light color, heat resistance, anti-oxidant properties, and bonding strength. This product is a yellow solid with a flake or bead-like appearance and is commonly used in the manufacturing of hot melt adhesives, pressure sensitive adhesives, and glue. 收起 | |
| Hydrocarbon Resin C9 HPE100P | Resin Chemicals Co., Ltd. | Hydrocarbon Resin C9 HPE100P is an aromatic, low molecular weight thermoplastic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide solubility, water resistance, insulation, low...展开 Hydrocarbon Resin C9 HPE100P is an aromatic, low molecular weight thermoplastic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide solubility, water resistance, insulation, low heat conduction, and chemical stability in adhesives, paints, and inks. It has a softening point of 90-110°C and is soluble in coal tars, esters, and turpentine oil. 收起 | |
| Hydrocarbon Resin C9 HPE100P-D | Resin Chemicals Co., Ltd. | Hydrocarbon Resin C9 HPE100P-D is an aromatic, low molecular weight thermoplastic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide solubility, water resistance, insulation, l...展开 Hydrocarbon Resin C9 HPE100P-D is an aromatic, low molecular weight thermoplastic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide solubility, water resistance, insulation, low heat conduction, and chemical stability in adhesives, paints, and inks. It has a softening point of 90-110°C and is soluble in coal tars, esters, and turpentine oil. 收起 | |
| Hydrocarbon Resin C9 HPE120P | Resin Chemicals Co., Ltd. | Hydrocarbon Resin C9 HPE120P is an aromatic, low molecular weight thermoplastic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide solubility, water resistance, insulation, low...展开 Hydrocarbon Resin C9 HPE120P is an aromatic, low molecular weight thermoplastic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide solubility, water resistance, insulation, low heat conduction, and chemical stability in adhesives, paints, and inks. It has a softening point of 110-140°C and is soluble in coal tars, esters, and turpentine oil. 收起 | |
| Hydrocarbon Resin C9 HPE120P-D | Resin Chemicals Co., Ltd. | Hydrocarbon Resin C9 HPE120P-D is an aromatic, low molecular weight thermoplastic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide solubility, water resistance, insulation, l...展开 Hydrocarbon Resin C9 HPE120P-D is an aromatic, low molecular weight thermoplastic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide solubility, water resistance, insulation, low heat conduction, and chemical stability in adhesives, paints, and inks. It has a softening point of 110-140°C and is soluble in coal tars, esters, and turpentine oil. 收起 | |
| Hydrocarbon Resin C9 HPE120PL | Resin Chemicals Co., Ltd. | Hydrocarbon Resin C9 HPE120PL is a low molecular weight thermoplastic aromatic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide good solubility, water resistance, insulation,...展开 Hydrocarbon Resin C9 HPE120PL is a low molecular weight thermoplastic aromatic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide good solubility, water resistance, insulation, low heat conduction, and chemical stability in adhesives, paints, and inks. It has a softening point of 115-125°C and is soluble in coal tars, esters, and turpentine oil. 收起 | |
| Hydrogenated Hydrocarbon Resin C5 HPE100H | Resin Chemicals Co., Ltd. | Hydrogenated Hydrocarbon Resin C5 HPE100H is a hydrogenated hydrocarbon resin designed to provide light color, heat resistance, anti-oxidant properties, and bonding strength. This product is slight yellow transparent flakes or beads in appearance and is c...展开 Hydrogenated Hydrocarbon Resin C5 HPE100H is a hydrogenated hydrocarbon resin designed to provide light color, heat resistance, anti-oxidant properties, and bonding strength. This product is slight yellow transparent flakes or beads in appearance and is commonly used in the manufacturing of hot melt adhesives, pressure sensitive adhesives, and glue. 收起 | |
| Hydrogenated Hydrocarbon Resin C9 HFM-100 | Resin Chemicals Co., Ltd. | Hydrogenated Hydrocarbon Resin C9 HFM-100 is a water-white hydrogenated hydrocarbon resin designed to provide light color, low melt-viscosity, narrow molecular weight distribution, and excellent thermal stability. This product is commonly used in the manu...展开 Hydrogenated Hydrocarbon Resin C9 HFM-100 is a water-white hydrogenated hydrocarbon resin designed to provide light color, low melt-viscosity, narrow molecular weight distribution, and excellent thermal stability. This product is commonly used in the manufacturing of hot melt adhesives and solvent-based pressure sensitive adhesives. 收起 | |
| Hydrogenated Rosin Ester | Resin Chemicals Co., Ltd. | Hydrogenated Rosin Ester HGE100 is a glycerol ester of hydrogenated rosin. This product is commonly used in applications such as screen protection film, diaper adhesive, pressure sensitive adhesive, and hot melt adhesives. It can provide super light color...展开 Hydrogenated Rosin Ester HGE100 is a glycerol ester of hydrogenated rosin. This product is commonly used in applications such as screen protection film, diaper adhesive, pressure sensitive adhesive, and hot melt adhesives. It can provide super light color, low odor, good heat stability, and excellent aging resistance. 收起 | |
| Hydrogenated Rosin-A | Resin Chemicals Co., Ltd. | Hydrogenated Rosin-A is a raw material that is commonly used in the manufacturing of adhesives, inks, and coatings. This product is transparent in appearance with a maximum abietic acid content of 2.0% and a softening point of 76°C. | |
| Hydrogenated Rosin-B | Resin Chemicals Co., Ltd. | Hydrogenated Rosin-B is a raw material that is commonly used in the manufacturing of adhesives, inks, and coatings. This product is transparent in appearance with a maximum abietic acid content of 2.0% and a softening point of 76°C. | |
| Hydrogenated Rosin-C | Resin Chemicals Co., Ltd. | Hydrogenated Rosin-C is a raw material that is commonly used in the manufacturing of adhesives, inks, and coatings. This product is transparent in appearance with a maximum abietic acid content of 2.0% and a softening point of 76°C. | |
| Hydrogenated Rosin-D | Resin Chemicals Co., Ltd. | Hydrogenated Rosin-D is a raw material that is commonly used in the manufacturing of adhesives, inks, and coatings. This product is transparent in appearance with a maximum abietic acid content of 2.0% and a softening point of 76°C. | |
| Liquid Rosin Ester LRE-1 | Resin Chemicals Co., Ltd. | Liquid Rosin Ester LRE-1 is a liquid rosin resin created from gum rosin through esterification with polyol. This product is commonly used in applications such as solvent-based PSA, adhesive tapes, and glue. | |
| Miradull™ 7060 A | Lawter | Miradull™ 7060 A is a dull sheet-fed overprint varnish that shows a dull and gloss contrast of the printed materials. It has good drying properties and withstands burnishing. The product also displays resistance to piling, good transfer, a light color and...展开 Miradull™ 7060 A is a dull sheet-fed overprint varnish that shows a dull and gloss contrast of the printed materials. It has good drying properties and withstands burnishing. The product also displays resistance to piling, good transfer, a light color and is considered ideal for use in overprints. 收起 | |
| Optilith™ 4 A | Lawter | Optilith™ 4 A is a water-fighting additive that has a low volatile and high solids lubricating compound. It is able to reduce water pick-up in lithographic inks and is functional across a variety of fountain solutions. Optilith™ 4 A is ideally suited for ...展开 Optilith™ 4 A is a water-fighting additive that has a low volatile and high solids lubricating compound. It is able to reduce water pick-up in lithographic inks and is functional across a variety of fountain solutions. Optilith™ 4 A is ideally suited for use in heatset and sheet-fed offset inks and in flushing vehicles. 收起 | |
| Polymerized Rosin | Resin Chemicals Co., Ltd. | Polymerized Rosin is a modified product consisting of gum rosin and abietic type acids. This product is used to provide a high softening point, oxidation resistance, and high viscosity in organic solvents. It is commonly used in inks, oil paints, adhesive...展开 Polymerized Rosin is a modified product consisting of gum rosin and abietic type acids. This product is used to provide a high softening point, oxidation resistance, and high viscosity in organic solvents. It is commonly used in inks, oil paints, adhesives, and emulsifying agents. It is a transparent solid in appearance with a softening point of 140-165°C. 收起 | |
| Reactol™ 1111 E | Lawter | Reactol™ 1111 E is a pure phenolic resin with good alcohol solubility and color retention and which is quick drying and resistant to alkalis, water, weathering and abrasion. It is soluble in ketones, aromatic hydrocarbons, aliphatic hydrocarbons and aceta...展开 Reactol™ 1111 E is a pure phenolic resin with good alcohol solubility and color retention and which is quick drying and resistant to alkalis, water, weathering and abrasion. It is soluble in ketones, aromatic hydrocarbons, aliphatic hydrocarbons and acetates when combined with drying oils. Reactol™ 1111 E is used in weather-resistant finishes, in cold-mix and spar varnishes and in flexo and gravure inks and lacquers. 收起 | |
| Reactol™ 5145 A | Lawter | Reactol™ 5145 A is an alcohol soluble polyester resin that offers high gloss and solvent release properties. It also exhibits a low viscosity while maintaining good adhesion and flexibility. The product is highly compatible with nitrocellulose and can be ...展开 Reactol™ 5145 A is an alcohol soluble polyester resin that offers high gloss and solvent release properties. It also exhibits a low viscosity while maintaining good adhesion and flexibility. The product is highly compatible with nitrocellulose and can be an adhesion promoter in hard resin systems. It is used in flexo and gravure alcohol-based inks and in aqueous inks, overprint varnishes and coatings. 收起 | |
| Refined Gum Rosin | Resin Chemicals Co., Ltd. | Refined Gum Rosin is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a light colored, transparent solid in appearance with a softening point of 76°C. This product is used to provide special chemical act...展开 Refined Gum Rosin is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a light colored, transparent solid in appearance with a softening point of 76°C. This product is used to provide special chemical activity in the production of coatings, inks, and rosin ester resins. 收起 | |
| Refined Rosin Modified Resin GE-85L | Resin Chemicals Co., Ltd. | Refined Rosin Modified Resin GE-85L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 85-88°C. This product is comm...展开 Refined Rosin Modified Resin GE-85L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 85-88°C. This product is commonly used in the production and manufacturing of hot melt adhesives, pressure sensitive adhesives, and high class glues. 收起 | |
| Refined Rosin Modified Resin GE-90L | Resin Chemicals Co., Ltd. | Refined Rosin Modified Resin GE-90L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 87-93°C. This product is comm...展开 Refined Rosin Modified Resin GE-90L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 87-93°C. This product is commonly used in the production and manufacturing of hot melt adhesives, pressure sensitive adhesives, and high class glues. 收起 | |
| Refined Rosin Modified Resin PE-100L | Resin Chemicals Co., Ltd. | Refined Rosin Modified Resin PE-100L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 97-103°C. This product is co...展开 Refined Rosin Modified Resin PE-100L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 97-103°C. This product is commonly used in the production and manufacturing of hot melt adhesives, pressure sensitive adhesives, and high class glues. 收起 | |
| Refined Rosin Modified Resin PE-105L | Resin Chemicals Co., Ltd. | Refined Rosin Modified Resin PE-105L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 102-108°C. This product is c...展开 Refined Rosin Modified Resin PE-105L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 102-108°C. This product is commonly used in the production and manufacturing of hot melt adhesives, pressure sensitive adhesives, and high class glues. 收起 | |
| Refined Rosin Modified Resin PE-95L | Resin Chemicals Co., Ltd. | Refined Rosin Modified Resin PE-95L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 92-98°C. This product is comm...展开 Refined Rosin Modified Resin PE-95L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 92-98°C. This product is commonly used in the production and manufacturing of hot melt adhesives, pressure sensitive adhesives, and high class glues. 收起 | |
| Rosin Modified Maleic Resin MR-130 | Resin Chemicals Co., Ltd. | Rosin Modified Maleic Resin MR-130 is a raw material that is esterified by the addition of gum rosin, maleic anhydride, glycerol or pentaerythritol. It is transparent to pale yellow flakes in appearance with a Gardner grade color of 3-4. This product is u...展开 Rosin Modified Maleic Resin MR-130 is a raw material that is esterified by the addition of gum rosin, maleic anhydride, glycerol or pentaerythritol. It is transparent to pale yellow flakes in appearance with a Gardner grade color of 3-4. This product is used to provide light color production and retention in nitrocellulose lacquers and inks. 收起 | |
| Rosin Modified Maleic Resin MR-130D | Resin Chemicals Co., Ltd. | Rosin Modified Maleic Resin MR-130D is a raw material that is esterified by the addition of gum rosin, maleic anhydride, glycerol or pentaerythritol. It is transparent to pale yellow flakes in appearance with a Gardner grade color of 5-8. This product is ...展开 Rosin Modified Maleic Resin MR-130D is a raw material that is esterified by the addition of gum rosin, maleic anhydride, glycerol or pentaerythritol. It is transparent to pale yellow flakes in appearance with a Gardner grade color of 5-8. This product is used to provide light color production and retention in nitrocellulose lacquers and inks. 收起 | |
| Rosin Modified Phenolic Resin PI116 | Resin Chemicals Co., Ltd. | Rosin Modified Phenolic Resin PI116 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 1500-2200 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展开 Rosin Modified Phenolic Resin PI116 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 1500-2200 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起 | |
| Rosin Modified Phenolic Resin PI118 | Resin Chemicals Co., Ltd. | Rosin Modified Phenolic Resin PI118 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 2000-2800 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展开 Rosin Modified Phenolic Resin PI118 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 2000-2800 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起 | |
| Rosin Modified Phenolic Resin PI136 | Resin Chemicals Co., Ltd. | Rosin Modified Phenolic Resin PI136 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 1600-2500 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展开 Rosin Modified Phenolic Resin PI136 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 1600-2500 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起 | |
| Rosin Modified Phenolic Resin PI138 | Resin Chemicals Co., Ltd. | Rosin Modified Phenolic Resin PI138 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 2400-3200 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展开 Rosin Modified Phenolic Resin PI138 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 2400-3200 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起 | |
| Rosin Modified Phenolic Resin PI142 | Resin Chemicals Co., Ltd. | Rosin Modified Phenolic Resin PI142 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 1500-2500 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展开 Rosin Modified Phenolic Resin PI142 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 1500-2500 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起 | |
| Rosin Modified Phenolic Resin PI145 | Resin Chemicals Co., Ltd. | Rosin Modified Phenolic Resin PI145 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 500-900 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used...展开 Rosin Modified Phenolic Resin PI145 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 500-900 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起 | |
| Rosin Modified Phenolic Resin PI146 | Resin Chemicals Co., Ltd. | Rosin Modified Phenolic Resin PI146 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 1300-1800 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展开 Rosin Modified Phenolic Resin PI146 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 1300-1800 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起 | |
| Rosin Modified Phenolic Resin PI147 | Resin Chemicals Co., Ltd. | Rosin Modified Phenolic Resin PI147 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 5500-8500 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展开 Rosin Modified Phenolic Resin PI147 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 5500-8500 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起 | |
| Rosin Modified Phenolic Resin PI148 | Resin Chemicals Co., Ltd. | Rosin Modified Phenolic Resin PI148 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 3500-5000 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展开 Rosin Modified Phenolic Resin PI148 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 3500-5000 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起 | |
| Rosin Modified Phenolic Resin PI149 | Resin Chemicals Co., Ltd. | Rosin Modified Phenolic Resin PI149 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 3000-4500 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展开 Rosin Modified Phenolic Resin PI149 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 3000-4500 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起 | |
| Rosin Modified Phenolic Resin PI152 | Resin Chemicals Co., Ltd. | Rosin Modified Phenolic Resin PI152 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 3800-5000 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展开 Rosin Modified Phenolic Resin PI152 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 3800-5000 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起 | |
| Rosin Modified Phenolic Resin PI155 | Resin Chemicals Co., Ltd. | Rosin Modified Phenolic Resin PI155 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 1800-2500 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展开 Rosin Modified Phenolic Resin PI155 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 1800-2500 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起 | |
| Rosin Modified Phenolic Resin PI160 | Resin Chemicals Co., Ltd. | Rosin Modified Phenolic Resin PI160 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 10000-14000 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly ...展开 Rosin Modified Phenolic Resin PI160 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 10000-14000 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起 | |
| Rosin Modified Resin GE85 | Resin Chemicals Co., Ltd. | Rosin Modified Resin GE85 is a glycerol ester of gum rosin that is esterified by gum rosin and glycerol or pertaerythrite. It is a slightly yellow to transparent flake or bead in appearance with a softening point of 85-89°C. This product is commonly used ...展开 Rosin Modified Resin GE85 is a glycerol ester of gum rosin that is esterified by gum rosin and glycerol or pertaerythrite. It is a slightly yellow to transparent flake or bead in appearance with a softening point of 85-89°C. This product is commonly used as a raw material in applications such as hot melt adhesives, pressure sensitive adhesives, and glue. 收起 | |
| Rosin Modified Resin GE90 | Resin Chemicals Co., Ltd. | Rosin Modified Resin GE90 is a glycerol ester of gum rosin that is esterified by gum rosin and glycerol or pertaerythrite. It is a slightly yellow to transparent flake or bead in appearance with a softening point of 88-92°C. This product is commonly used ...展开 Rosin Modified Resin GE90 is a glycerol ester of gum rosin that is esterified by gum rosin and glycerol or pertaerythrite. It is a slightly yellow to transparent flake or bead in appearance with a softening point of 88-92°C. This product is commonly used as a raw material in applications such as hot melt adhesives, pressure sensitive adhesives, and glue. 收起 | |
| Rosin Modified Resin PE 105 | Resin Chemicals Co., Ltd. | Rosin Modified Resin PE105 is a glycerol ester of gum rosin that is esterified by gum rosin and glycerol or pertaerythrite. It is a slightly yellow to transparent flake or bead in appearance with a softening point of 103-107°C. This product is commonly us...展开 Rosin Modified Resin PE105 is a glycerol ester of gum rosin that is esterified by gum rosin and glycerol or pertaerythrite. It is a slightly yellow to transparent flake or bead in appearance with a softening point of 103-107°C. This product is commonly used as a raw material in applications such as hot melt adhesives, pressure sensitive adhesives, and glue. 收起 | |
| Rosin Modified Resin PE100 | Resin Chemicals Co., Ltd. | Rosin Modified Resin PE100 is a glycerol ester of gum rosin that is esterified by gum rosin and glycerol or pertaerythrite. It is a slightly yellow to transparent flake or bead in appearance with a softening point of 98-102°C. This product is commonly use...展开 Rosin Modified Resin PE100 is a glycerol ester of gum rosin that is esterified by gum rosin and glycerol or pertaerythrite. It is a slightly yellow to transparent flake or bead in appearance with a softening point of 98-102°C. This product is commonly used as a raw material in applications such as hot melt adhesives, pressure sensitive adhesives, and glue. 收起 | |
| Rosin Modified Resin PE95 | Resin Chemicals Co., Ltd. | Rosin Modified Resin PE95 is a glycerol ester of gum rosin that is esterified by gum rosin and glycerol or pertaerythrite. It is a slightly yellow to transparent flake or bead in appearance with a softening point of 93-97°C. This product is commonly used ...展开 Rosin Modified Resin PE95 is a glycerol ester of gum rosin that is esterified by gum rosin and glycerol or pertaerythrite. It is a slightly yellow to transparent flake or bead in appearance with a softening point of 93-97°C. This product is commonly used as a raw material in applications such as hot melt adhesives, pressure sensitive adhesives, and glue. 收起 | |
| Snowtack™ SE724G | Lawter | Snowtack™ SE724G is a solvent-free waterborne tackifier with a stabilized rosin ester component that brings superior adhesive performance to a variety of substrates. The product is free of alkylphenol ethoxylate (APE) and has the ability to soften hard re...展开 Snowtack™ SE724G is a solvent-free waterborne tackifier with a stabilized rosin ester component that brings superior adhesive performance to a variety of substrates. The product is free of alkylphenol ethoxylate (APE) and has the ability to soften hard resins, providing a smooth peel. It also improves adhesion to high and low energy surfaces and shows compatibility with acrylic and other polymers. It has good water resistance, is mechanically stable and has applications in waterborne, pressure-sensitive adhesives in various industries. 收起 | |
| Snowtack™ SE780G | Lawter | Snowtack™ SE780G is a waterborne tackifier from adducted rosin and a process of esterification. It is solvent-free with a resin ester component that brings superior adhesive performance to a variety of substrates. The product displays high cohesion, impro...展开 Snowtack™ SE780G is a waterborne tackifier from adducted rosin and a process of esterification. It is solvent-free with a resin ester component that brings superior adhesive performance to a variety of substrates. The product displays high cohesion, improves adhesion to high and low-energy substrates, has good mechanical stability and has applications in various waterborne adhesive systems. 收起 | |
| Stirinol™ 97 A | Lawter | Stirinol™ 97 A is a heatset wax compound to give good rub and slip in heatset inks. It is easily dispersed, retains gloss and has good re-crystallization resistance. It also had minimal effect on rheology and is ideally suited for use in heatset offset in...展开 Stirinol™ 97 A is a heatset wax compound to give good rub and slip in heatset inks. It is easily dispersed, retains gloss and has good re-crystallization resistance. It also had minimal effect on rheology and is ideally suited for use in heatset offset inks and hot foil stamping applications. 收起 | |
| Synkyd™ 50 E | Lawter | Synkyd™ 50 E consists of a vinyl-modified alkyd resin displaying high solubility in mineral distillates and effective water resistance benefits. It has good pigment wetting properties, along with a high gloss and good flow behavior. The product is used in...展开 Synkyd™ 50 E consists of a vinyl-modified alkyd resin displaying high solubility in mineral distillates and effective water resistance benefits. It has good pigment wetting properties, along with a high gloss and good flow behavior. The product is used in offset, sheet-fed, letterpress and screen ink applications. 收起 | |
| Terpene Resin 105 | Resin Chemicals Co., Ltd. | Terpene Resin 105 is a raw material created from aluminum trichloride and α-Pinene that appears as a pale yellow, transparent solid. It has a softening point of 100-110°C and contains a maximum impurity level of 30ppm. This product is commonly used in the...展开 Terpene Resin 105 is a raw material created from aluminum trichloride and α-Pinene that appears as a pale yellow, transparent solid. It has a softening point of 100-110°C and contains a maximum impurity level of 30ppm. This product is commonly used in the manufacturing of hot melt adhesives, pressure sensitive adhesives, and glue. 收起 | |
| Terpene Resin 115 | Resin Chemicals Co., Ltd. | Terpene Resin 115 is a raw material created from aluminum trichloride and α-Pinene that appears as a pale yellow, transparent solid. It has a softening point of 110-120°C and contains a maximum impurity level of 30ppm. This product is commonly used in the...展开 Terpene Resin 115 is a raw material created from aluminum trichloride and α-Pinene that appears as a pale yellow, transparent solid. It has a softening point of 110-120°C and contains a maximum impurity level of 30ppm. This product is commonly used in the manufacturing of hot melt adhesives, pressure sensitive adhesives, and glue. 收起 | |
| Terpene Resin 85 | Resin Chemicals Co., Ltd. | Terpene Resin 85 is a raw material created from aluminum trichloride and α-Pinene that appears as a pale yellow, transparent solid. It has a softening point of 80-90°C and contains a maximum impurity level of 30ppm. This product is commonly used in the ma...展开 Terpene Resin 85 is a raw material created from aluminum trichloride and α-Pinene that appears as a pale yellow, transparent solid. It has a softening point of 80-90°C and contains a maximum impurity level of 30ppm. This product is commonly used in the manufacturing of hot melt adhesives, pressure sensitive adhesives, and glue. 收起 | |
| Terpene Resin 95 | Resin Chemicals Co., Ltd. | Terpene Resin 95 is a raw material created from aluminum trichloride and α-Pinene that appears as a pale yellow, transparent solid. It has a softening point of 90-100°C and contains a maximum impurity level of 30ppm. This product is commonly used in the m...展开 Terpene Resin 95 is a raw material created from aluminum trichloride and α-Pinene that appears as a pale yellow, transparent solid. It has a softening point of 90-100°C and contains a maximum impurity level of 30ppm. This product is commonly used in the manufacturing of hot melt adhesives, pressure sensitive adhesives, and glue. 收起 | |
| Ultrafine™ 1WLS A | Lawter | Ultrafine™ 1WLS A is a micronized ultrafine polytetrafluoroethylene powder made for abrasion, heat resistance and lubricity and is used to improve surface properties of coatings and printing inks. It can be used together with other waxes to improve perfor...展开 Ultrafine™ 1WLS A is a micronized ultrafine polytetrafluoroethylene powder made for abrasion, heat resistance and lubricity and is used to improve surface properties of coatings and printing inks. It can be used together with other waxes to improve performance. Ultrafine™ 1WLS A is used in UV, metal deco and overprint varnishes, in heatset and sheet-fed inks and in can, coil and wood powder coatings. 收起 | |
| Ultrapoly™ 210 A | Lawter | Ultrapoly™ 210 A is a sheet-fed polyethylene compound that is non-volatile and is a hard-drying and fast setting vehicle. It is recommended in situations that call for mar resistance, slip and abrasion. Ultrapoly™ 210 A protects the film during the earli...展开 Ultrapoly™ 210 A is a sheet-fed polyethylene compound that is non-volatile and is a hard-drying and fast setting vehicle. It is recommended in situations that call for mar resistance, slip and abrasion. Ultrapoly™ 210 A protects the film during the earliest phases of the printing process while developing toughness over time. It is ideally used in sheet-fed offset inks, in OPV, metal decorating and in UV inks. 收起 | |
| Ultrapoly™ 990 E | Lawter | Ultrapoly™ 990 E is a wax compound from polyethylene wax and vegetable oil. It has good rub, abrasion and scratch resistance with good slip and anti-blocking benefits. The product also shows good gloss, is non-volatile and is used as a wax compound in qui...展开 Ultrapoly™ 990 E is a wax compound from polyethylene wax and vegetable oil. It has good rub, abrasion and scratch resistance with good slip and anti-blocking benefits. The product also shows good gloss, is non-volatile and is used as a wax compound in quickset, sheet-fed and heatset inks. 收起 | |
| Uroset™ 100SC | Lawter | Uroset™ 100SC is a dispersion varnish with a low viscosity that was created as a universal base for any letterpress oil ink formulations or offsets. Uroset™ 100SC carries high pigment concentrations, providing good gloss as well as good pigment wetting an...展开 Uroset™ 100SC is a dispersion varnish with a low viscosity that was created as a universal base for any letterpress oil ink formulations or offsets. Uroset™ 100SC carries high pigment concentrations, providing good gloss as well as good pigment wetting and litho properties. Apart from offsets and letterpress inks, it is also suitable for use in metal deco inks. 收起 | |
| Uroset™ 2055C | Lawter | Uroset™ 2055C is a wetting varnish for offset printing that is formulated from alkali blue and is considered to have good flow properties. It has a soya bean oil base with 75% non-volatile composition. Uroset™ 2055C is recommended for use in sheet-fed ink...展开 Uroset™ 2055C is a wetting varnish for offset printing that is formulated from alkali blue and is considered to have good flow properties. It has a soya bean oil base with 75% non-volatile composition. Uroset™ 2055C is recommended for use in sheet-fed inks. 收起 | |
| Uroset™ 8802 C | Lawter | Uroset™ 8802 C is a pigment dispersion varnish that is 80% non-volatile and is based on vegetable oils, mineral distillates and modified rosin-based resins. It is used in pigment concentrates and combines fast setting benefits with high gloss, while maint...展开 Uroset™ 8802 C is a pigment dispersion varnish that is 80% non-volatile and is based on vegetable oils, mineral distillates and modified rosin-based resins. It is used in pigment concentrates and combines fast setting benefits with high gloss, while maintaining good water balance and good rheological and press stability. Uroset™ 8802 C is suited for use as a single varnish for all sheet-fed inks and gloss offsets. 收起 | |
| Uroset™ 8825 C | Lawter | Uroset™ 8825 C is a 100% non-volatile pigment dispersion varnish from vegetable oils, ester solvents and phenolic-modified rosin-based resins. It displays good pigment wetting properties and combines fast setting benefits with high gloss. Uroset™ 8825 C c...展开 Uroset™ 8825 C is a 100% non-volatile pigment dispersion varnish from vegetable oils, ester solvents and phenolic-modified rosin-based resins. It displays good pigment wetting properties and combines fast setting benefits with high gloss. Uroset™ 8825 C can be used as a single varnish for all sheet-fed inks and gloss offsets. 收起 | |
| Uroset™ FGVC | Lawter | Uroset™ FGVC is a quickset dispersion varnish with good pigment wetting properties that can create ground or flushed color bases with stable and easily-handled bodies. It has high pigment loading ability, is fast setting and has good litho properties. Uro...展开 Uroset™ FGVC is a quickset dispersion varnish with good pigment wetting properties that can create ground or flushed color bases with stable and easily-handled bodies. It has high pigment loading ability, is fast setting and has good litho properties. Uroset™ FGVC is durable and has applications in offset inks, flush and pigment concentrates. 收起 | |
| Waterborne Emulsion Rosin Ester WBE138 | Resin Chemicals Co., Ltd. | Waterborne Emulsion Rosin Ester WBE138 is a unique waterborne tackifier that combines high solids content and high adhesion performance and stability at high speed. This product is commonly used in applications such as water-based adhesives and glue. It c...展开 Waterborne Emulsion Rosin Ester WBE138 is a unique waterborne tackifier that combines high solids content and high adhesion performance and stability at high speed. This product is commonly used in applications such as water-based adhesives and glue. It can provide aggressive tack and peel, and give a unique balance of room temperature and low temperature adhesion in pressure sensitive adhesives. 收起 | |
| Webvar™ 1126 | Lawter | Webvar™ 1126 is a heatset gel varnish displaying good transfer and lithographic performance, along with high gloss at all press speeds. It also has low misting and good water balance properties and is considered ideal for use in heatset inks. | |
| Webvar™ 1127 | Lawter | Webvar™ 1127 is a heatset free-flow varnish which displays good flow, water balance and high gloss features, along with low misting and fast setting properties. It is considered a varnish that is ideal for adjusting the rheology in the ink to create bette...展开 Webvar™ 1127 is a heatset free-flow varnish which displays good flow, water balance and high gloss features, along with low misting and fast setting properties. It is considered a varnish that is ideal for adjusting the rheology in the ink to create better gloss and transfer. Webvar™ 1127 is used in heatset inks and wetting varnishes. 收起 |
