| Alcohol Soluble Maleic Resin WMR110 | Resin Chemicals Co., Ltd. | Alcohol Soluble Maleic Resin WMR110 is a raw material created from modified maleic resins through the esterification of polyalcohol. It is a bead or flake in appearance with a softening point of 100-120°C. This product is commonly used to provide high glo...展开 Alcohol Soluble Maleic Resin WMR110 is a raw material created from modified maleic resins through the esterification of polyalcohol. It is a bead or flake in appearance with a softening point of 100-120°C. This product is commonly used to provide high gloss and fast drying in alcohol soluble printing inks and water-based inks. 收起 | |
| Alcohol Soluble Maleic Resin WMR130 | Resin Chemicals Co., Ltd. | Alcohol Soluble Maleic Resin WMR130 is a raw material created from modified maleic resins through the esterification of polyalcohol. It is a bead or flake in appearance with a softening point of 120-140°C. This product is commonly used to provide high glo...展开 Alcohol Soluble Maleic Resin WMR130 is a raw material created from modified maleic resins through the esterification of polyalcohol. It is a bead or flake in appearance with a softening point of 120-140°C. This product is commonly used to provide high gloss and fast drying in alcohol soluble printing inks and water-based inks. 收起 | |
| Alcohol Soluble Maleic Resin WMR150 | Resin Chemicals Co., Ltd. | Alcohol Soluble Maleic Resin WMR150 is a raw material created from modified maleic resins through the esterification of polyalcohol. It is a bead or flake in appearance with a softening point of 140-150°C. This product is commonly used to provide high glo...展开 Alcohol Soluble Maleic Resin WMR150 is a raw material created from modified maleic resins through the esterification of polyalcohol. It is a bead or flake in appearance with a softening point of 140-150°C. This product is commonly used to provide high gloss and fast drying in alcohol soluble printing inks and water-based inks. 收起 | |
| AR-1263 | Quaker Color (a Division of McAdoo & Allen, Inc.) | AR-1263, in the form of a milky liquid, is an acrylic resin binder (acrylic polymer). It has good light fastness, flexibility, wear resistance, and when combined with polyurethane resins emboss-able base coats with good print retention and coverage can be...展开 AR-1263, in the form of a milky liquid, is an acrylic resin binder (acrylic polymer). It has good light fastness, flexibility, wear resistance, and when combined with polyurethane resins emboss-able base coats with good print retention and coverage can be formulated. It can be used alone or in combination with polyurethane resins in base or topcoat applications for automotive leathers. 收起 | |
| Disproportionated Rosin 1st Grade | Resin Chemicals Co., Ltd. | Disproportionated Rosin 1st Grade is a raw material produced by isomerizing gum rosin with a catalyst. This product is commonly used as a polymer emulsification agent in the production of water-soluble pressure sensitive adhesives. It has a maximum abieti...展开 Disproportionated Rosin 1st Grade is a raw material produced by isomerizing gum rosin with a catalyst. This product is commonly used as a polymer emulsification agent in the production of water-soluble pressure sensitive adhesives. It has a maximum abietic acid content of 0.5% and a softening point of 76°C. 收起 | |
| Disproportionated Rosin Extra Grade | Resin Chemicals Co., Ltd. | Disproportionated Rosin Extra Grade is a raw material produced by isomerizing gum rosin with a catalyst. This product is commonly used as a polymer emulsification agent in the production of water-soluble pressure sensitive adhesives. It has a maximum abie...展开 Disproportionated Rosin Extra Grade is a raw material produced by isomerizing gum rosin with a catalyst. This product is commonly used as a polymer emulsification agent in the production of water-soluble pressure sensitive adhesives. It has a maximum abietic acid content of 0.1% and a softening point of 76°C. 收起 | |
| DM-1010 | Quaker Color (a Division of McAdoo & Allen, Inc.) | DM-1010, in the form of a clear anionic liquid, is a medium hard NMP free high performance aliphatic polyether polyurethane dispersion. This product has good coverage and filling characteristics. It can be used in combination with polyurethane or acrylic ...展开 DM-1010, in the form of a clear anionic liquid, is a medium hard NMP free high performance aliphatic polyether polyurethane dispersion. This product has good coverage and filling characteristics. It can be used in combination with polyurethane or acrylic resins or alone and is appropriate for all types of leather. 收起 | |
| DM-1114 | Quaker Color (a Division of McAdoo & Allen, Inc.) | DM-1114, in the form of a milky anionic liquid, is a medium soft, inherently dull NMP free high performance aliphatic polyurethane dispersion. It is for use in intermediate coats for leather and leather topcoat applications where good flexibility, embossi...展开 DM-1114, in the form of a milky anionic liquid, is a medium soft, inherently dull NMP free high performance aliphatic polyurethane dispersion. It is for use in intermediate coats for leather and leather topcoat applications where good flexibility, embossing print retention and abrasion resistance is required. 收起 | |
| DM-831 | Quaker Color (a Division of McAdoo & Allen, Inc.) | DM-831, in the form of a milky anionic liquid, 831is a unique medium soft, inherently dull, co-solvent free, high performance aliphatic polyether polyurethane dispersion. It is for use in leather base coats, intermediate coats and leather topcoat applicat...展开 DM-831, in the form of a milky anionic liquid, 831is a unique medium soft, inherently dull, co-solvent free, high performance aliphatic polyether polyurethane dispersion. It is for use in leather base coats, intermediate coats and leather topcoat applications where good flexibility, soft hand feel and lower gloss properties are required. 收起 | |
| DT-1169 | Quaker Color (a Division of McAdoo & Allen, Inc.) | DT-1169, in the form of a whitish liquid, is an acrylic and polyurethane co-polymer. It is a unique dull binder for automotive topcoats that is typically used in combination with polyurethane resins to produce high performance topcoats with good physical ...展开 DT-1169, in the form of a whitish liquid, is an acrylic and polyurethane co-polymer. It is a unique dull binder for automotive topcoats that is typically used in combination with polyurethane resins to produce high performance topcoats with good physical properties and good flow. 收起 | |
| DT-1308 | Quaker Color (a Division of McAdoo & Allen, Inc.) | DT-1308 is a high efficiency polyurethane duller with a fine particle size. It is suitable for use in water base automotive leather topcoat formulations to reduce gloss and enhance abrasion resistance. It is used as the primary dulling component to reduce...展开 DT-1308 is a high efficiency polyurethane duller with a fine particle size. It is suitable for use in water base automotive leather topcoat formulations to reduce gloss and enhance abrasion resistance. It is used as the primary dulling component to reduce gloss levels to meet OEM specifications. 收起 | |
| Gum Rosin K | Resin Chemicals Co., Ltd. | Gum Rosin K is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a yellow-red, transparent solid in appearance with a softening point of 74°C. This product is used to provide special chemical activity in ...展开 Gum Rosin K is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a yellow-red, transparent solid in appearance with a softening point of 74°C. This product is used to provide special chemical activity in the production of coatings, inks, and rosin ester resins. 收起 | |
| Gum Rosin M | Resin Chemicals Co., Ltd. | Gum Rosin M is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a yellow brown, transparent solid in appearance with a softening point of 74°C. This product is used to provide special chemical activity i...展开 Gum Rosin M is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a yellow brown, transparent solid in appearance with a softening point of 74°C. This product is used to provide special chemical activity in the production of coatings, inks, and rosin ester resins. 收起 | |
| Gum Rosin N | Resin Chemicals Co., Ltd. | Gum Rosin N is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a deep yellow, transparent solid in appearance with a softening point of 75°C. This product is used to provide special chemical activity in...展开 Gum Rosin N is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a deep yellow, transparent solid in appearance with a softening point of 75°C. This product is used to provide special chemical activity in the production of coatings, inks, and rosin ester resins. 收起 | |
| Gum Rosin WG | Resin Chemicals Co., Ltd. | Gum Rosin WG is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a yellow, transparent solid in appearance with a softening point of 75°C. This product is used to provide special chemical activity in the...展开 Gum Rosin WG is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a yellow, transparent solid in appearance with a softening point of 75°C. This product is used to provide special chemical activity in the production of coatings, inks, and rosin ester resins. 收起 | |
| Gum Rosin WW | Resin Chemicals Co., Ltd. | Gum Rosin WW is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a pale yellow, transparent solid in appearance with a softening point of 76°C. This product is used to provide special chemical activity i...展开 Gum Rosin WW is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a pale yellow, transparent solid in appearance with a softening point of 76°C. This product is used to provide special chemical activity in the production of coatings, inks, and rosin ester resins. 收起 | |
| Gum Rosin X | Resin Chemicals Co., Ltd. | Gum Rosin X is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a slightly yellow, transparent solid in appearance with a softening point of 76°C. This product is used to provide special chemical activit...展开 Gum Rosin X is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a slightly yellow, transparent solid in appearance with a softening point of 76°C. This product is used to provide special chemical activity in the production of coatings, inks, and rosin ester resins. 收起 | |
| Hydrocarbon DCPD Resin HSU100 | Resin Chemicals Co., Ltd. | Hydrocarbon DCPD Resin HSU100 is a water-white thermoplastic resin produced from polymerization and hydrogenation of cyclic ingredients. This product is designed to provide good heat resistance and good compatibility with base polymers. It is often used a...展开 Hydrocarbon DCPD Resin HSU100 is a water-white thermoplastic resin produced from polymerization and hydrogenation of cyclic ingredients. This product is designed to provide good heat resistance and good compatibility with base polymers. It is often used as a tackifier for hot melt adhesives, hot melt pressure sensitive adhesives, and solvent-based pressure sensitive adhesives. 收起 | |
| Hydrocarbon Resin C5 HPE100A | Resin Chemicals Co., Ltd. | Hydrocarbon Resin C5 HPE100A is a raw material designed to provide light color, heat resistance, anti-oxidant properties, and bonding strength. This product is a yellow solid with a flake or bead-like appearance and is commonly used in the manufacturing o...展开 Hydrocarbon Resin C5 HPE100A is a raw material designed to provide light color, heat resistance, anti-oxidant properties, and bonding strength. This product is a yellow solid with a flake or bead-like appearance and is commonly used in the manufacturing of hot melt adhesives, pressure sensitive adhesives, and glue. 收起 | |
| Hydrocarbon Resin C5 HPE100A-L | Resin Chemicals Co., Ltd. | Hydrocarbon Resin C5 HPE100A-L is a raw material designed to provide light color, heat resistance, anti-oxidant properties, and bonding strength. This product is a yellow solid with a flake or bead-like appearance and is commonly used in the manufacturing...展开 Hydrocarbon Resin C5 HPE100A-L is a raw material designed to provide light color, heat resistance, anti-oxidant properties, and bonding strength. This product is a yellow solid with a flake or bead-like appearance and is commonly used in the manufacturing of hot melt adhesives, pressure sensitive adhesives, and glue. 收起 | |
| Hydrocarbon Resin C9 HPE100P | Resin Chemicals Co., Ltd. | Hydrocarbon Resin C9 HPE100P is an aromatic, low molecular weight thermoplastic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide solubility, water resistance, insulation, low...展开 Hydrocarbon Resin C9 HPE100P is an aromatic, low molecular weight thermoplastic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide solubility, water resistance, insulation, low heat conduction, and chemical stability in adhesives, paints, and inks. It has a softening point of 90-110°C and is soluble in coal tars, esters, and turpentine oil. 收起 | |
| Hydrocarbon Resin C9 HPE100P-D | Resin Chemicals Co., Ltd. | Hydrocarbon Resin C9 HPE100P-D is an aromatic, low molecular weight thermoplastic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide solubility, water resistance, insulation, l...展开 Hydrocarbon Resin C9 HPE100P-D is an aromatic, low molecular weight thermoplastic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide solubility, water resistance, insulation, low heat conduction, and chemical stability in adhesives, paints, and inks. It has a softening point of 90-110°C and is soluble in coal tars, esters, and turpentine oil. 收起 | |
| Hydrocarbon Resin C9 HPE120P | Resin Chemicals Co., Ltd. | Hydrocarbon Resin C9 HPE120P is an aromatic, low molecular weight thermoplastic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide solubility, water resistance, insulation, low...展开 Hydrocarbon Resin C9 HPE120P is an aromatic, low molecular weight thermoplastic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide solubility, water resistance, insulation, low heat conduction, and chemical stability in adhesives, paints, and inks. It has a softening point of 110-140°C and is soluble in coal tars, esters, and turpentine oil. 收起 | |
| Hydrocarbon Resin C9 HPE120P-D | Resin Chemicals Co., Ltd. | Hydrocarbon Resin C9 HPE120P-D is an aromatic, low molecular weight thermoplastic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide solubility, water resistance, insulation, l...展开 Hydrocarbon Resin C9 HPE120P-D is an aromatic, low molecular weight thermoplastic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide solubility, water resistance, insulation, low heat conduction, and chemical stability in adhesives, paints, and inks. It has a softening point of 110-140°C and is soluble in coal tars, esters, and turpentine oil. 收起 | |
| Hydrocarbon Resin C9 HPE120PL | Resin Chemicals Co., Ltd. | Hydrocarbon Resin C9 HPE120PL is a low molecular weight thermoplastic aromatic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide good solubility, water resistance, insulation,...展开 Hydrocarbon Resin C9 HPE120PL is a low molecular weight thermoplastic aromatic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide good solubility, water resistance, insulation, low heat conduction, and chemical stability in adhesives, paints, and inks. It has a softening point of 115-125°C and is soluble in coal tars, esters, and turpentine oil. 收起 | |
| Hydrogenated Hydrocarbon Resin C5 HPE100H | Resin Chemicals Co., Ltd. | Hydrogenated Hydrocarbon Resin C5 HPE100H is a hydrogenated hydrocarbon resin designed to provide light color, heat resistance, anti-oxidant properties, and bonding strength. This product is slight yellow transparent flakes or beads in appearance and is c...展开 Hydrogenated Hydrocarbon Resin C5 HPE100H is a hydrogenated hydrocarbon resin designed to provide light color, heat resistance, anti-oxidant properties, and bonding strength. This product is slight yellow transparent flakes or beads in appearance and is commonly used in the manufacturing of hot melt adhesives, pressure sensitive adhesives, and glue. 收起 | |
| Hydrogenated Hydrocarbon Resin C9 HFM-100 | Resin Chemicals Co., Ltd. | Hydrogenated Hydrocarbon Resin C9 HFM-100 is a water-white hydrogenated hydrocarbon resin designed to provide light color, low melt-viscosity, narrow molecular weight distribution, and excellent thermal stability. This product is commonly used in the manu...展开 Hydrogenated Hydrocarbon Resin C9 HFM-100 is a water-white hydrogenated hydrocarbon resin designed to provide light color, low melt-viscosity, narrow molecular weight distribution, and excellent thermal stability. This product is commonly used in the manufacturing of hot melt adhesives and solvent-based pressure sensitive adhesives. 收起 | |
| Hydrogenated Rosin Ester | Resin Chemicals Co., Ltd. | Hydrogenated Rosin Ester HGE100 is a glycerol ester of hydrogenated rosin. This product is commonly used in applications such as screen protection film, diaper adhesive, pressure sensitive adhesive, and hot melt adhesives. It can provide super light color...展开 Hydrogenated Rosin Ester HGE100 is a glycerol ester of hydrogenated rosin. This product is commonly used in applications such as screen protection film, diaper adhesive, pressure sensitive adhesive, and hot melt adhesives. It can provide super light color, low odor, good heat stability, and excellent aging resistance. 收起 | |
| Hydrogenated Rosin-A | Resin Chemicals Co., Ltd. | Hydrogenated Rosin-A is a raw material that is commonly used in the manufacturing of adhesives, inks, and coatings. This product is transparent in appearance with a maximum abietic acid content of 2.0% and a softening point of 76°C. | |
| Hydrogenated Rosin-B | Resin Chemicals Co., Ltd. | Hydrogenated Rosin-B is a raw material that is commonly used in the manufacturing of adhesives, inks, and coatings. This product is transparent in appearance with a maximum abietic acid content of 2.0% and a softening point of 76°C. | |
| Hydrogenated Rosin-C | Resin Chemicals Co., Ltd. | Hydrogenated Rosin-C is a raw material that is commonly used in the manufacturing of adhesives, inks, and coatings. This product is transparent in appearance with a maximum abietic acid content of 2.0% and a softening point of 76°C. | |
| Hydrogenated Rosin-D | Resin Chemicals Co., Ltd. | Hydrogenated Rosin-D is a raw material that is commonly used in the manufacturing of adhesives, inks, and coatings. This product is transparent in appearance with a maximum abietic acid content of 2.0% and a softening point of 76°C. | |
| JK-230F | Quaker Color (a Division of McAdoo & Allen, Inc.) | JK-230F, in the form of a clear anionic liquid, is NMP free aqueous polyurethane polymer dispersion with good abrasion and adhesion resistance. It can be used as a primary binder to formulate flexible and tough topcoats with high melting points and is app...展开 JK-230F, in the form of a clear anionic liquid, is NMP free aqueous polyurethane polymer dispersion with good abrasion and adhesion resistance. It can be used as a primary binder to formulate flexible and tough topcoats with high melting points and is applicable for all types of leather finishes. 收起 | |
| JK-233F | Quaker Color (a Division of McAdoo & Allen, Inc.) | JK-233F, in the form of a clear anionic liquid, is NMP free aliphatic polyurethane binder that can be used in topcoat and base coat applications for high quality shoe leathers and upholstery. It creates tough coatings with great physical properties and so...展开 JK-233F, in the form of a clear anionic liquid, is NMP free aliphatic polyurethane binder that can be used in topcoat and base coat applications for high quality shoe leathers and upholstery. It creates tough coatings with great physical properties and soft feel that conveys flexible and soft finish with good water resistance and abrasion properties. JK-233 can normally be used in topcoats as an additive binder or in combination with acrylics to improve scuff resistance and emboss-ability. 收起 | |
| JK-535F | Quaker Color (a Division of McAdoo & Allen, Inc.) | JK-535F, in the form of a clear anionic liquid, is a tough NMP free water-based polyurethane binder that conveys good physical properties such as, scuff resistance, water resistance, light fastness, elongation, and toughness. It can be used in topcoats an...展开 JK-535F, in the form of a clear anionic liquid, is a tough NMP free water-based polyurethane binder that conveys good physical properties such as, scuff resistance, water resistance, light fastness, elongation, and toughness. It can be used in topcoats and base coats for all types of leather finishes. 收起 | |
| JK-691FD | Quaker Color (a Division of McAdoo & Allen, Inc.) | JK-691FD, in the form of a clear anionic liquid, is a NMP free aqueous aliphatic lightfast polyurethane polymer with good stain resistance, abrasion resistance, high gloss, and tensile strength. It is applicable for use in topcoats and base coats for all ...展开 JK-691FD, in the form of a clear anionic liquid, is a NMP free aqueous aliphatic lightfast polyurethane polymer with good stain resistance, abrasion resistance, high gloss, and tensile strength. It is applicable for use in topcoats and base coats for all types of leather finishes. 收起 | |
| JK-702F | Quaker Color (a Division of McAdoo & Allen, Inc.) | JK-702F, in the form of a hazy anionic liquid, is a medium hard NMP free aliphatic lightfast polyurethane dispersion resin. It has good block resistance, UV exposure resistance, and water resistance. It is an all-purpose polyurethane resin for leather app...展开 JK-702F, in the form of a hazy anionic liquid, is a medium hard NMP free aliphatic lightfast polyurethane dispersion resin. It has good block resistance, UV exposure resistance, and water resistance. It is an all-purpose polyurethane resin for leather applications where good flexibility, abrasion resistance and embossing properties are required. 收起 | |
| Liquid Rosin Ester LRE-1 | Resin Chemicals Co., Ltd. | Liquid Rosin Ester LRE-1 is a liquid rosin resin created from gum rosin through esterification with polyol. This product is commonly used in applications such as solvent-based PSA, adhesive tapes, and glue. | |
| MH-1991 | Quaker Color (a Division of McAdoo & Allen, Inc.) | MH-1991 is an Aliphatic urethane dispersion. Inherently low gloss (0.7-1.0). It is velvety soft with excellent household cleaners resistance, high hydrolytic and UV resistance. Automotive interior coatings could be formulated without the addition of fla...展开 MH-1991 is an Aliphatic urethane dispersion. Inherently low gloss (0.7-1.0). It is velvety soft with excellent household cleaners resistance, high hydrolytic and UV resistance. Automotive interior coatings could be formulated without the addition of flattening or feel additives. MH-1991 has high flexibility which makes it suitable for thermoforming coatings and hydroxyl functionality for isocyanate crosslinking. It is for use automotive interior, electronics, wood and plastic toys. 收起 | |
| MH-245 | Quaker Color (a Division of McAdoo & Allen, Inc.) | MH-245 is a high performance, low VOC aliphatic polyurethane dispersion designed for concrete coatings. MH-245 has hot tire pick up resistance when formulated as a one component coating. It can also be crosslinked with carbodiimines or isocyanate. | |
| ML4000R | Quaker Color (a Division of McAdoo & Allen, Inc.) | ML4000R, in the form of a white liquid, is a pre-base binder formulated for roll coating as an additive to repair and fill damaged leather grain surfaces with unwanted scars and open scratches. It promotes maximum shrinkage after drying, maximum adhesion,...展开 ML4000R, in the form of a white liquid, is a pre-base binder formulated for roll coating as an additive to repair and fill damaged leather grain surfaces with unwanted scars and open scratches. It promotes maximum shrinkage after drying, maximum adhesion, and finish flexibility. ML4000R can also be used as a base coat additive to encourage additional grain uniformity and coverage while upholding a fine finish break. 收起 | |
| NE-721FD | Quaker Color (a Division of McAdoo & Allen, Inc.) | NE-721FD, in the form of a clear anionic liquid, is a medium hard NMP free aliphatic lightfast polyurethane polymer with good stain resistance, tensile strength, abrasion resistance, toughness. It is applicable in topcoats and base coats for all types of ...展开 NE-721FD, in the form of a clear anionic liquid, is a medium hard NMP free aliphatic lightfast polyurethane polymer with good stain resistance, tensile strength, abrasion resistance, toughness. It is applicable in topcoats and base coats for all types of leather finishes. 收起 | |
| Polymerized Rosin | Resin Chemicals Co., Ltd. | Polymerized Rosin is a modified product consisting of gum rosin and abietic type acids. This product is used to provide a high softening point, oxidation resistance, and high viscosity in organic solvents. It is commonly used in inks, oil paints, adhesive...展开 Polymerized Rosin is a modified product consisting of gum rosin and abietic type acids. This product is used to provide a high softening point, oxidation resistance, and high viscosity in organic solvents. It is commonly used in inks, oil paints, adhesives, and emulsifying agents. It is a transparent solid in appearance with a softening point of 140-165°C. 收起 | |
| PR-1238 | Quaker Color (a Division of McAdoo & Allen, Inc.) | PR-1238, in the form of a clear anionic liquid, is a soft NMP free aliphatic polyurethane resin with good bally flex properties and hydrolysis resistance. It is applicable in embossable leather base coats, Intermediate coats and some leather topcoat appli...展开 PR-1238, in the form of a clear anionic liquid, is a soft NMP free aliphatic polyurethane resin with good bally flex properties and hydrolysis resistance. It is applicable in embossable leather base coats, Intermediate coats and some leather topcoat applications where extreme flexibility is required. 收起 | |
| PR-1245 | Quaker Color (a Division of McAdoo & Allen, Inc.) | PR-1245, in the form of a hazy anionic liquid, is a medium hard, NMP free, high performance aliphatic polyurethane resin. It is for use in topcoats and intermediate coats for leather applications where exceptional hydrolytic stability, flexibility, and ab...展开 PR-1245, in the form of a hazy anionic liquid, is a medium hard, NMP free, high performance aliphatic polyurethane resin. It is for use in topcoats and intermediate coats for leather applications where exceptional hydrolytic stability, flexibility, and abrasion resistance is required. 收起 | |
| Refined Gum Rosin | Resin Chemicals Co., Ltd. | Refined Gum Rosin is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a light colored, transparent solid in appearance with a softening point of 76°C. This product is used to provide special chemical act...展开 Refined Gum Rosin is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a light colored, transparent solid in appearance with a softening point of 76°C. This product is used to provide special chemical activity in the production of coatings, inks, and rosin ester resins. 收起 | |
| Refined Rosin Modified Resin GE-85L | Resin Chemicals Co., Ltd. | Refined Rosin Modified Resin GE-85L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 85-88°C. This product is comm...展开 Refined Rosin Modified Resin GE-85L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 85-88°C. This product is commonly used in the production and manufacturing of hot melt adhesives, pressure sensitive adhesives, and high class glues. 收起 | |
| Refined Rosin Modified Resin GE-90L | Resin Chemicals Co., Ltd. | Refined Rosin Modified Resin GE-90L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 87-93°C. This product is comm...展开 Refined Rosin Modified Resin GE-90L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 87-93°C. This product is commonly used in the production and manufacturing of hot melt adhesives, pressure sensitive adhesives, and high class glues. 收起 | |
| Refined Rosin Modified Resin PE-100L | Resin Chemicals Co., Ltd. | Refined Rosin Modified Resin PE-100L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 97-103°C. This product is co...展开 Refined Rosin Modified Resin PE-100L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 97-103°C. This product is commonly used in the production and manufacturing of hot melt adhesives, pressure sensitive adhesives, and high class glues. 收起 | |
| Refined Rosin Modified Resin PE-105L | Resin Chemicals Co., Ltd. | Refined Rosin Modified Resin PE-105L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 102-108°C. This product is c...展开 Refined Rosin Modified Resin PE-105L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 102-108°C. This product is commonly used in the production and manufacturing of hot melt adhesives, pressure sensitive adhesives, and high class glues. 收起 | |
| Refined Rosin Modified Resin PE-95L | Resin Chemicals Co., Ltd. | Refined Rosin Modified Resin PE-95L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 92-98°C. This product is comm...展开 Refined Rosin Modified Resin PE-95L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 92-98°C. This product is commonly used in the production and manufacturing of hot melt adhesives, pressure sensitive adhesives, and high class glues. 收起 | |
| Rosin Modified Maleic Resin MR-130 | Resin Chemicals Co., Ltd. | Rosin Modified Maleic Resin MR-130 is a raw material that is esterified by the addition of gum rosin, maleic anhydride, glycerol or pentaerythritol. It is transparent to pale yellow flakes in appearance with a Gardner grade color of 3-4. This product is u...展开 Rosin Modified Maleic Resin MR-130 is a raw material that is esterified by the addition of gum rosin, maleic anhydride, glycerol or pentaerythritol. It is transparent to pale yellow flakes in appearance with a Gardner grade color of 3-4. This product is used to provide light color production and retention in nitrocellulose lacquers and inks. 收起 | |
| Rosin Modified Maleic Resin MR-130D | Resin Chemicals Co., Ltd. | Rosin Modified Maleic Resin MR-130D is a raw material that is esterified by the addition of gum rosin, maleic anhydride, glycerol or pentaerythritol. It is transparent to pale yellow flakes in appearance with a Gardner grade color of 5-8. This product is ...展开 Rosin Modified Maleic Resin MR-130D is a raw material that is esterified by the addition of gum rosin, maleic anhydride, glycerol or pentaerythritol. It is transparent to pale yellow flakes in appearance with a Gardner grade color of 5-8. This product is used to provide light color production and retention in nitrocellulose lacquers and inks. 收起 | |
| Rosin Modified Phenolic Resin PI116 | Resin Chemicals Co., Ltd. | Rosin Modified Phenolic Resin PI116 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 1500-2200 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展开 Rosin Modified Phenolic Resin PI116 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 1500-2200 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起 | |
| Rosin Modified Phenolic Resin PI118 | Resin Chemicals Co., Ltd. | Rosin Modified Phenolic Resin PI118 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 2000-2800 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展开 Rosin Modified Phenolic Resin PI118 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 2000-2800 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起 | |
| Rosin Modified Phenolic Resin PI136 | Resin Chemicals Co., Ltd. | Rosin Modified Phenolic Resin PI136 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 1600-2500 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展开 Rosin Modified Phenolic Resin PI136 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 1600-2500 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起 | |
| Rosin Modified Phenolic Resin PI138 | Resin Chemicals Co., Ltd. | Rosin Modified Phenolic Resin PI138 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 2400-3200 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展开 Rosin Modified Phenolic Resin PI138 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 2400-3200 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起 | |
| Rosin Modified Phenolic Resin PI142 | Resin Chemicals Co., Ltd. | Rosin Modified Phenolic Resin PI142 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 1500-2500 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展开 Rosin Modified Phenolic Resin PI142 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 1500-2500 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起 | |
| Rosin Modified Phenolic Resin PI145 | Resin Chemicals Co., Ltd. | Rosin Modified Phenolic Resin PI145 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 500-900 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used...展开 Rosin Modified Phenolic Resin PI145 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 500-900 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起 | |
| Rosin Modified Phenolic Resin PI146 | Resin Chemicals Co., Ltd. | Rosin Modified Phenolic Resin PI146 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 1300-1800 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展开 Rosin Modified Phenolic Resin PI146 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 1300-1800 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起 | |
| Rosin Modified Phenolic Resin PI147 | Resin Chemicals Co., Ltd. | Rosin Modified Phenolic Resin PI147 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 5500-8500 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展开 Rosin Modified Phenolic Resin PI147 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 5500-8500 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起 | |
| Rosin Modified Phenolic Resin PI148 | Resin Chemicals Co., Ltd. | Rosin Modified Phenolic Resin PI148 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 3500-5000 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展开 Rosin Modified Phenolic Resin PI148 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 3500-5000 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起 | |
| Rosin Modified Phenolic Resin PI149 | Resin Chemicals Co., Ltd. | Rosin Modified Phenolic Resin PI149 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 3000-4500 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展开 Rosin Modified Phenolic Resin PI149 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 3000-4500 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起 | |
| Rosin Modified Phenolic Resin PI152 | Resin Chemicals Co., Ltd. | Rosin Modified Phenolic Resin PI152 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 3800-5000 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展开 Rosin Modified Phenolic Resin PI152 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 3800-5000 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起 | |
| Rosin Modified Phenolic Resin PI155 | Resin Chemicals Co., Ltd. | Rosin Modified Phenolic Resin PI155 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 1800-2500 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展开 Rosin Modified Phenolic Resin PI155 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 1800-2500 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起 | |
| Rosin Modified Phenolic Resin PI160 | Resin Chemicals Co., Ltd. | Rosin Modified Phenolic Resin PI160 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 10000-14000 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly ...展开 Rosin Modified Phenolic Resin PI160 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 10000-14000 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起 | |
| Rosin Modified Resin GE85 | Resin Chemicals Co., Ltd. | Rosin Modified Resin GE85 is a glycerol ester of gum rosin that is esterified by gum rosin and glycerol or pertaerythrite. It is a slightly yellow to transparent flake or bead in appearance with a softening point of 85-89°C. This product is commonly used ...展开 Rosin Modified Resin GE85 is a glycerol ester of gum rosin that is esterified by gum rosin and glycerol or pertaerythrite. It is a slightly yellow to transparent flake or bead in appearance with a softening point of 85-89°C. This product is commonly used as a raw material in applications such as hot melt adhesives, pressure sensitive adhesives, and glue. 收起 | |
| Rosin Modified Resin GE90 | Resin Chemicals Co., Ltd. | Rosin Modified Resin GE90 is a glycerol ester of gum rosin that is esterified by gum rosin and glycerol or pertaerythrite. It is a slightly yellow to transparent flake or bead in appearance with a softening point of 88-92°C. This product is commonly used ...展开 Rosin Modified Resin GE90 is a glycerol ester of gum rosin that is esterified by gum rosin and glycerol or pertaerythrite. It is a slightly yellow to transparent flake or bead in appearance with a softening point of 88-92°C. This product is commonly used as a raw material in applications such as hot melt adhesives, pressure sensitive adhesives, and glue. 收起 | |
| Rosin Modified Resin PE 105 | Resin Chemicals Co., Ltd. | Rosin Modified Resin PE105 is a glycerol ester of gum rosin that is esterified by gum rosin and glycerol or pertaerythrite. It is a slightly yellow to transparent flake or bead in appearance with a softening point of 103-107°C. This product is commonly us...展开 Rosin Modified Resin PE105 is a glycerol ester of gum rosin that is esterified by gum rosin and glycerol or pertaerythrite. It is a slightly yellow to transparent flake or bead in appearance with a softening point of 103-107°C. This product is commonly used as a raw material in applications such as hot melt adhesives, pressure sensitive adhesives, and glue. 收起 | |
| Rosin Modified Resin PE100 | Resin Chemicals Co., Ltd. | Rosin Modified Resin PE100 is a glycerol ester of gum rosin that is esterified by gum rosin and glycerol or pertaerythrite. It is a slightly yellow to transparent flake or bead in appearance with a softening point of 98-102°C. This product is commonly use...展开 Rosin Modified Resin PE100 is a glycerol ester of gum rosin that is esterified by gum rosin and glycerol or pertaerythrite. It is a slightly yellow to transparent flake or bead in appearance with a softening point of 98-102°C. This product is commonly used as a raw material in applications such as hot melt adhesives, pressure sensitive adhesives, and glue. 收起 | |
| Rosin Modified Resin PE95 | Resin Chemicals Co., Ltd. | Rosin Modified Resin PE95 is a glycerol ester of gum rosin that is esterified by gum rosin and glycerol or pertaerythrite. It is a slightly yellow to transparent flake or bead in appearance with a softening point of 93-97°C. This product is commonly used ...展开 Rosin Modified Resin PE95 is a glycerol ester of gum rosin that is esterified by gum rosin and glycerol or pertaerythrite. It is a slightly yellow to transparent flake or bead in appearance with a softening point of 93-97°C. This product is commonly used as a raw material in applications such as hot melt adhesives, pressure sensitive adhesives, and glue. 收起 | |
| Terpene Resin 105 | Resin Chemicals Co., Ltd. | Terpene Resin 105 is a raw material created from aluminum trichloride and α-Pinene that appears as a pale yellow, transparent solid. It has a softening point of 100-110°C and contains a maximum impurity level of 30ppm. This product is commonly used in the...展开 Terpene Resin 105 is a raw material created from aluminum trichloride and α-Pinene that appears as a pale yellow, transparent solid. It has a softening point of 100-110°C and contains a maximum impurity level of 30ppm. This product is commonly used in the manufacturing of hot melt adhesives, pressure sensitive adhesives, and glue. 收起 | |
| Terpene Resin 115 | Resin Chemicals Co., Ltd. | Terpene Resin 115 is a raw material created from aluminum trichloride and α-Pinene that appears as a pale yellow, transparent solid. It has a softening point of 110-120°C and contains a maximum impurity level of 30ppm. This product is commonly used in the...展开 Terpene Resin 115 is a raw material created from aluminum trichloride and α-Pinene that appears as a pale yellow, transparent solid. It has a softening point of 110-120°C and contains a maximum impurity level of 30ppm. This product is commonly used in the manufacturing of hot melt adhesives, pressure sensitive adhesives, and glue. 收起 | |
| Terpene Resin 85 | Resin Chemicals Co., Ltd. | Terpene Resin 85 is a raw material created from aluminum trichloride and α-Pinene that appears as a pale yellow, transparent solid. It has a softening point of 80-90°C and contains a maximum impurity level of 30ppm. This product is commonly used in the ma...展开 Terpene Resin 85 is a raw material created from aluminum trichloride and α-Pinene that appears as a pale yellow, transparent solid. It has a softening point of 80-90°C and contains a maximum impurity level of 30ppm. This product is commonly used in the manufacturing of hot melt adhesives, pressure sensitive adhesives, and glue. 收起 | |
| Terpene Resin 95 | Resin Chemicals Co., Ltd. | Terpene Resin 95 is a raw material created from aluminum trichloride and α-Pinene that appears as a pale yellow, transparent solid. It has a softening point of 90-100°C and contains a maximum impurity level of 30ppm. This product is commonly used in the m...展开 Terpene Resin 95 is a raw material created from aluminum trichloride and α-Pinene that appears as a pale yellow, transparent solid. It has a softening point of 90-100°C and contains a maximum impurity level of 30ppm. This product is commonly used in the manufacturing of hot melt adhesives, pressure sensitive adhesives, and glue. 收起 | |
| TK-1181 | Quaker Color (a Division of McAdoo & Allen, Inc.) | TK-1181 is a soft, water based, aromatic polyurethane dispersion use to promote adhesion and penetration in all types of leather base coats. It is used at levels between 5-20% in all types of leather base coats to promote adhesion and penetration. | |
| Waterborne Emulsion Rosin Ester WBE138 | Resin Chemicals Co., Ltd. | Waterborne Emulsion Rosin Ester WBE138 is a unique waterborne tackifier that combines high solids content and high adhesion performance and stability at high speed. This product is commonly used in applications such as water-based adhesives and glue. It c...展开 Waterborne Emulsion Rosin Ester WBE138 is a unique waterborne tackifier that combines high solids content and high adhesion performance and stability at high speed. This product is commonly used in applications such as water-based adhesives and glue. It can provide aggressive tack and peel, and give a unique balance of room temperature and low temperature adhesion in pressure sensitive adhesives. 收起 |
