| A-25 Anatase Pigment | CPM Industries, Inc. | A-25 Anatase Pigment is an anatase titanium dioxide pigment that is easily dispersed in aqueous applications and available in powder or granular form. This product is ideal for application in chalking paints, concrete curing compounds, and electro-ceramic...展开 A-25 Anatase Pigment is an anatase titanium dioxide pigment that is easily dispersed in aqueous applications and available in powder or granular form. This product is ideal for application in chalking paints, concrete curing compounds, and electro-ceramics. It has a purity of 98% min. and a mean particle size in the range of 0.25 to 0.30 microns. 收起 | |
| A-300F Anatase | CPM Industries, Inc. | A-300F Anatase is ideal for application in polyamide, polyester, and cellulose-viscose fibers. This product has a purity of 98% min. and a particle size distribution around an average of 0.3 microns specifically designed for use in synthetic fiber deluste...展开 A-300F Anatase is ideal for application in polyamide, polyester, and cellulose-viscose fibers. This product has a purity of 98% min. and a particle size distribution around an average of 0.3 microns specifically designed for use in synthetic fiber delustering. 收起 | |
| Alcohol Soluble Maleic Resin WMR110 | Resin Chemicals Co., Ltd. | Alcohol Soluble Maleic Resin WMR110 is a raw material created from modified maleic resins through the esterification of polyalcohol. It is a bead or flake in appearance with a softening point of 100-120°C. This product is commonly used to provide high glo...展开 Alcohol Soluble Maleic Resin WMR110 is a raw material created from modified maleic resins through the esterification of polyalcohol. It is a bead or flake in appearance with a softening point of 100-120°C. This product is commonly used to provide high gloss and fast drying in alcohol soluble printing inks and water-based inks. 收起 | |
| Alcohol Soluble Maleic Resin WMR130 | Resin Chemicals Co., Ltd. | Alcohol Soluble Maleic Resin WMR130 is a raw material created from modified maleic resins through the esterification of polyalcohol. It is a bead or flake in appearance with a softening point of 120-140°C. This product is commonly used to provide high glo...展开 Alcohol Soluble Maleic Resin WMR130 is a raw material created from modified maleic resins through the esterification of polyalcohol. It is a bead or flake in appearance with a softening point of 120-140°C. This product is commonly used to provide high gloss and fast drying in alcohol soluble printing inks and water-based inks. 收起 | |
| Alcohol Soluble Maleic Resin WMR150 | Resin Chemicals Co., Ltd. | Alcohol Soluble Maleic Resin WMR150 is a raw material created from modified maleic resins through the esterification of polyalcohol. It is a bead or flake in appearance with a softening point of 140-150°C. This product is commonly used to provide high glo...展开 Alcohol Soluble Maleic Resin WMR150 is a raw material created from modified maleic resins through the esterification of polyalcohol. It is a bead or flake in appearance with a softening point of 140-150°C. This product is commonly used to provide high gloss and fast drying in alcohol soluble printing inks and water-based inks. 收起 | |
| Chlorinated Polypropylene (CPP) | Anhui Elite Industrial Co., Ltd | Chlorinated Polypropylene (CPP) is a non-toxic, tasteless, fast dissolving white to yellow granular powder. This product provides adhesion to coatings, adhesives, and inks. Chlorinated Polypropylene (CPP) is also used for its weather, chemical, oil, ozone...展开 Chlorinated Polypropylene (CPP) is a non-toxic, tasteless, fast dissolving white to yellow granular powder. This product provides adhesion to coatings, adhesives, and inks. Chlorinated Polypropylene (CPP) is also used for its weather, chemical, oil, ozone, fire, and thermal aging resisting properties. This product is mainly used as an adhesive agent for printing ink and plastic ink. 收起 | |
| Copolymer of Vinyl Chloride and Vinyl Isobutyl Ether CMP25 | Anhui Elite Industrial Co., Ltd | Copolymer of Vinyl Chloride and Vinyl Isobutyl Ether CMP25 is a colorless, odorless, non-toxic, and thermoplastic powder. This product has a 44% chlorine content and provides anti-corrosive properties as well. Copolymer of Vinyl Chloride and Vinyl Isobuty...展开 Copolymer of Vinyl Chloride and Vinyl Isobutyl Ether CMP25 is a colorless, odorless, non-toxic, and thermoplastic powder. This product has a 44% chlorine content and provides anti-corrosive properties as well. Copolymer of Vinyl Chloride and Vinyl Isobutyl Ether CMP25 provides clinging, anti-water, and weather protection to paint and inks. 收起 | |
| Copolymer of Vinyl Chloride and Vinyl Isobutyl Ether CMP35 | Anhui Elite Industrial Co., Ltd | Copolymer of Vinyl Chloride and Vinyl Isobutyl Ether CMP35 is a colorless, odorless, non-toxic, thermoplastic powder. This product has a density between 0.38 and 0.48 and provides anti-corrosive properties as well. Copolymer of Vinyl Chloride and Vinyl I...展开 Copolymer of Vinyl Chloride and Vinyl Isobutyl Ether CMP35 is a colorless, odorless, non-toxic, thermoplastic powder. This product has a density between 0.38 and 0.48 and provides anti-corrosive properties as well. Copolymer of Vinyl Chloride and Vinyl Isobutyl Ether CMP15 provides clinging, anti-water, and weather protection to paint and inks. 收起 | |
| Copolymer of Vinyl Chloride and Vinyl Isobutyl Ether CMP60 | Anhui Elite Industrial Co., Ltd | Copolymer of Vinyl Chloride and Vinyl Isobutyl Ether CMP60 is a colorless, odorless, non-toxic, thermoplastic powder. This product has a density between 0.38 and 0.48 g/cm3 and provides anti-corrosive properties as well. This product provides clinging, an...展开 Copolymer of Vinyl Chloride and Vinyl Isobutyl Ether CMP60 is a colorless, odorless, non-toxic, thermoplastic powder. This product has a density between 0.38 and 0.48 g/cm3 and provides anti-corrosive properties as well. This product provides clinging, anti-water, and weather protection to paint and inks. 收起 | |
| Dimer Acid | Anhui Elite Industrial Co., Ltd | Dimer Acid is a non-toxic, non-volatile, viscous, transparent acid which can dissolve in most organic solvents, but is water insoluble. This product has a viscosity between 6000 and 8500 and a density of 0.932 g/cm3. Dimer Acid provides viscosity and adhe...展开 Dimer Acid is a non-toxic, non-volatile, viscous, transparent acid which can dissolve in most organic solvents, but is water insoluble. This product has a viscosity between 6000 and 8500 and a density of 0.932 g/cm3. Dimer Acid provides viscosity and adhesion to plastic bump version of printing inks. 收起 | |
| Disproportionated Rosin 1st Grade | Resin Chemicals Co., Ltd. | Disproportionated Rosin 1st Grade is a raw material produced by isomerizing gum rosin with a catalyst. This product is commonly used as a polymer emulsification agent in the production of water-soluble pressure sensitive adhesives. It has a maximum abieti...展开 Disproportionated Rosin 1st Grade is a raw material produced by isomerizing gum rosin with a catalyst. This product is commonly used as a polymer emulsification agent in the production of water-soluble pressure sensitive adhesives. It has a maximum abietic acid content of 0.5% and a softening point of 76°C. 收起 | |
| Disproportionated Rosin Extra Grade | Resin Chemicals Co., Ltd. | Disproportionated Rosin Extra Grade is a raw material produced by isomerizing gum rosin with a catalyst. This product is commonly used as a polymer emulsification agent in the production of water-soluble pressure sensitive adhesives. It has a maximum abie...展开 Disproportionated Rosin Extra Grade is a raw material produced by isomerizing gum rosin with a catalyst. This product is commonly used as a polymer emulsification agent in the production of water-soluble pressure sensitive adhesives. It has a maximum abietic acid content of 0.1% and a softening point of 76°C. 收起 | |
| Fintac2331 Non-Crystallizing Rosin | Finjet Chemical Industries, Ltd. | Fintac2331 Non-Crystallizing Rosin, in the form of a solid or flake, is a modified rosin that offers good combination of crystallization resistance and oxidation. This product is applied as a tackifier for polymers, and has suggested applications in water...展开 Fintac2331 Non-Crystallizing Rosin, in the form of a solid or flake, is a modified rosin that offers good combination of crystallization resistance and oxidation. This product is applied as a tackifier for polymers, and has suggested applications in water-based adhesives, pressure sensitive sealants, and alcohol soluble printing inks and paints. 收起 | |
| Fintac2333 Modified Rosin Resin | Finjet Chemical Industries, Ltd. | Fintac2333 Modified Rosin Resin is a low odor, non-crystallization rosin resin that is used to formulate numerous kinds of water-based and hot melt adhesives, effectively improving their original low temperature property and adhesion. This product is also...展开 Fintac2333 Modified Rosin Resin is a low odor, non-crystallization rosin resin that is used to formulate numerous kinds of water-based and hot melt adhesives, effectively improving their original low temperature property and adhesion. This product is also applicable for alcohol soluble paints and inks. 收起 | |
| Fintac5336 Polymerized Rosin | Finjet Chemical Industries, Ltd. | Fintac5336 Polymerized Rosin is a selectively polymerized rosin that has a higher softening point, good oxidation resistance, and higher heat resistance to adhesives. This product is mainly applied in adhesives, inks, synthetic resins, varnishes, and pain...展开 Fintac5336 Polymerized Rosin is a selectively polymerized rosin that has a higher softening point, good oxidation resistance, and higher heat resistance to adhesives. This product is mainly applied in adhesives, inks, synthetic resins, varnishes, and paints. 收起 | |
| Glass Beads / Glass Microspheres | Anhui Elite Industrial Co., Ltd | Glass Beads / Glass Microspheres are clean, apparent beads with no obvious impurities. This product has a reflection index between 1.5 and 1.61 and is composed of sodium lime glass. Glass Beads / Glass Microspheres are used to improve visibility for traf...展开 Glass Beads / Glass Microspheres are clean, apparent beads with no obvious impurities. This product has a reflection index between 1.5 and 1.61 and is composed of sodium lime glass. Glass Beads / Glass Microspheres are used to improve visibility for traffic marking paint. 收起 | |
| GR-1173 | Hubei Gurun Technology Co., Ltd. | GR-1173 is a yellowish liquid photoinitiator with high-efficiency and anti-yellowing. This product is commonly applied to overprint varnish and coatings for wood, plastics and metal. | |
| GR-184 | Hubei Gurun Technology Co., Ltd. | GR-184 is a white powder with strong thermal stability and anti-yellowing photoinitiator. This product is commonly used in overprint varnish and coatings for wood, plastics and metal. | |
| GR-369 | Hubei Gurun Technology Co., Ltd. | GR-369 is a yellowish powder and photoinitiator that contains quick photocuring and high sensitivity. This product has applications offset inks, screen inks, flexo inks and inkjet inks. | |
| GR-907 | Hubei Gurun Technology Co., Ltd. | GR-907 is a white powder and a photoinitiator with quick photocuring speed, high sensitivity and low odor. This product can be applied to offset inks, screen inks, flexo inks and inkjet inks. | |
| GR-DVE | Hubei Gurun Technology Co., Ltd. | GR-DVE is a yellowish clear liquid and a vinyl etheric double functional monomer with low toxicity, quick curing speed, no oxygen interference, little shrinkage and strong cure and toughness properties. This product is commonly applied to cationic photocu...展开 GR-DVE is a yellowish clear liquid and a vinyl etheric double functional monomer with low toxicity, quick curing speed, no oxygen interference, little shrinkage and strong cure and toughness properties. This product is commonly applied to cationic photocurable coatings, adhesives, elastomers, printing inks and more enabling better photopolymerization performance. 收起 | |
| GR-FMT | Hubei Gurun Technology Co., Ltd. | GR-FMT is an orange powder and a photoinitiator with high sensitivity used for curing of thick layers, including layers thicker than 70 µm, and dark photocuring coatings. This product's absorption wavelength can reach 560 nm and can also be used for UV c...展开 GR-FMT is an orange powder and a photoinitiator with high sensitivity used for curing of thick layers, including layers thicker than 70 µm, and dark photocuring coatings. This product's absorption wavelength can reach 560 nm and can also be used for UV coating, printing ink and adhesive. 收起 | |
| GR-ITX | Hubei Gurun Technology Co., Ltd. | GR-ITX is a yellowish powder and photoinitiator that contains quick photocuring and photoinitiating. This product is for use in clear and colorful UV coating or ink, offset inks, screen inks, flexo inks and inkjet inks. | |
| GR-PAG-2 | Hubei Gurun Technology Co., Ltd. | GR-PAG-2 is a yellow brown powder and a cationic type photoinitiator with strong thermal stability, high solubility and light controllability. This product is used in cationic photocuring and chemical acid agile amplification imagery systems. | |
| GR-PS-1 | Hubei Gurun Technology Co., Ltd. | GR-PS-1 is a yellow crystal powder and a photosensitizer with strong thermal stability, photoinitiating and sensitivity promotion. This product is used to promote UV coating and applied to high sensitive printing plate photosensitive coating, negative pho...展开 GR-PS-1 is a yellow crystal powder and a photosensitizer with strong thermal stability, photoinitiating and sensitivity promotion. This product is used to promote UV coating and applied to high sensitive printing plate photosensitive coating, negative photoresist and other sensitive material. 收起 | |
| GR-TPO | Hubei Gurun Technology Co., Ltd. | GR-TPO is a yellowish powder used as a photoinitiator. This product has quick photocuring speed, can be applied to thick layers of photocuring coatings, contain low-volatility, low odor and anti-yellowing. | |
| GR-VE/A | Hubei Gurun Technology Co., Ltd. | GR-VE/A is a yellowish clear liquid and a vinyl ether/acrylyl cationic/free-radical mixed monomer with low toxicity, quick curing speed, low oxygen interference, little shrinkage and strong cure and toughness properties. This product is commonly applied t...展开 GR-VE/A is a yellowish clear liquid and a vinyl ether/acrylyl cationic/free-radical mixed monomer with low toxicity, quick curing speed, low oxygen interference, little shrinkage and strong cure and toughness properties. This product is commonly applied to cationic/free-radical photocurable coatings, adhesives, elastomers, printing inks and more enabling better photopolymerization performance. 收起 | |
| GR-VE/VP | Hubei Gurun Technology Co., Ltd. | GR-VE/VP is a yellowish clear liquid and a vinyl ether/allyl cationic/free-radical mixed monomer with low toxicity, quick curing speed, low oxygen interference, little shrinkage and strong cure and toughness properties. This product is commonly applied to...展开 GR-VE/VP is a yellowish clear liquid and a vinyl ether/allyl cationic/free-radical mixed monomer with low toxicity, quick curing speed, low oxygen interference, little shrinkage and strong cure and toughness properties. This product is commonly applied to cationic/free-radical photocurable coatings, adhesives, elastomers, printing inks and more enabling better photopolymerization performance. 收起 | |
| GR-XBPO | Hubei Gurun Technology Co., Ltd. | GR-XBPO is a yellowish powder and a photoinitiator good for thick layers of photocuring coatings with anti-yellowing, low-volatility, low odor and good solubility. This product's absorption wavelength can reach 450 nm and can also be used for resistant UV...展开 GR-XBPO is a yellowish powder and a photoinitiator good for thick layers of photocuring coatings with anti-yellowing, low-volatility, low odor and good solubility. This product's absorption wavelength can reach 450 nm and can also be used for resistant UV varnish, many coatings, adhesive, offset printing ink, screen printing ink and flexo ink. 收起 | |
| Gum Rosin K | Resin Chemicals Co., Ltd. | Gum Rosin K is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a yellow-red, transparent solid in appearance with a softening point of 74°C. This product is used to provide special chemical activity in ...展开 Gum Rosin K is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a yellow-red, transparent solid in appearance with a softening point of 74°C. This product is used to provide special chemical activity in the production of coatings, inks, and rosin ester resins. 收起 | |
| Gum Rosin M | Resin Chemicals Co., Ltd. | Gum Rosin M is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a yellow brown, transparent solid in appearance with a softening point of 74°C. This product is used to provide special chemical activity i...展开 Gum Rosin M is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a yellow brown, transparent solid in appearance with a softening point of 74°C. This product is used to provide special chemical activity in the production of coatings, inks, and rosin ester resins. 收起 | |
| Gum Rosin N | Resin Chemicals Co., Ltd. | Gum Rosin N is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a deep yellow, transparent solid in appearance with a softening point of 75°C. This product is used to provide special chemical activity in...展开 Gum Rosin N is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a deep yellow, transparent solid in appearance with a softening point of 75°C. This product is used to provide special chemical activity in the production of coatings, inks, and rosin ester resins. 收起 | |
| Gum Rosin WG | Resin Chemicals Co., Ltd. | Gum Rosin WG is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a yellow, transparent solid in appearance with a softening point of 75°C. This product is used to provide special chemical activity in the...展开 Gum Rosin WG is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a yellow, transparent solid in appearance with a softening point of 75°C. This product is used to provide special chemical activity in the production of coatings, inks, and rosin ester resins. 收起 | |
| Gum Rosin WW | Resin Chemicals Co., Ltd. | Gum Rosin WW is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a pale yellow, transparent solid in appearance with a softening point of 76°C. This product is used to provide special chemical activity i...展开 Gum Rosin WW is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a pale yellow, transparent solid in appearance with a softening point of 76°C. This product is used to provide special chemical activity in the production of coatings, inks, and rosin ester resins. 收起 | |
| Gum Rosin X | Resin Chemicals Co., Ltd. | Gum Rosin X is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a slightly yellow, transparent solid in appearance with a softening point of 76°C. This product is used to provide special chemical activit...展开 Gum Rosin X is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a slightly yellow, transparent solid in appearance with a softening point of 76°C. This product is used to provide special chemical activity in the production of coatings, inks, and rosin ester resins. 收起 | |
| Heavy Turpentine Oil | Resin Chemicals Co., Ltd. | Heavy Turpentine Oil is pinene with special chemical composition that is primarily used as a solvent. It is transparent in appearance with a maximum relative density of 0.94. This product is commonly used in the manufacturing of applications such as coati...展开 Heavy Turpentine Oil is pinene with special chemical composition that is primarily used as a solvent. It is transparent in appearance with a maximum relative density of 0.94. This product is commonly used in the manufacturing of applications such as coatings, synthetic camphor, synthetic resin, and organic industrial products. 收起 | |
| HESS NCS-10 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-10 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-10 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-12 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-12 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-12 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-15 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-15 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-15 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-3 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-3 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-3 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-5 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-5 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-5 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-8 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-8 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-8 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| Hollow Glass Microspheres T20 | Anhui Elite Industrial Co., Ltd | Hollow Glass Microspheres T20 is a small tiny sphere which can improve its mobility and reduce viscosity. This product has a melting point of 625 degrees Celsius and a true density 0.20 g/cm3. Hollow Glass Microspheres T20 improves flow properties and adj...展开 Hollow Glass Microspheres T20 is a small tiny sphere which can improve its mobility and reduce viscosity. This product has a melting point of 625 degrees Celsius and a true density 0.20 g/cm3. Hollow Glass Microspheres T20 improves flow properties and adjusts the density of paint. 收起 | |
| Hollow Glass Microspheres T25 | Anhui Elite Industrial Co., Ltd | Hollow Glass Microspheres T25 is a small tiny sphere which can improve its mobility and reduce viscosity. This product has a melting point of 625 degrees Celsius and a true density 0.25 g/cm3. Hollow Glass Microspheres T25 improves flow properties and adj...展开 Hollow Glass Microspheres T25 is a small tiny sphere which can improve its mobility and reduce viscosity. This product has a melting point of 625 degrees Celsius and a true density 0.25 g/cm3. Hollow Glass Microspheres T25 improves flow properties and adjusts the density of paint. 收起 | |
| Hollow Glass Microspheres T32 | Anhui Elite Industrial Co., Ltd | Hollow Glass Microspheres T32 is a small tiny sphere which can improve its mobility and reduce viscosity. This product has a melting point of 625 degrees Celsius and a true density 0.32 g/cm3. Hollow Glass Microspheres T32 improves flow properties and adj...展开 Hollow Glass Microspheres T32 is a small tiny sphere which can improve its mobility and reduce viscosity. This product has a melting point of 625 degrees Celsius and a true density 0.32 g/cm3. Hollow Glass Microspheres T32 improves flow properties and adjusts the density of paint. 收起 | |
| Hollow Glass Microspheres T40 | Anhui Elite Industrial Co., Ltd | Hollow Glass Microspheres T40 is a small tiny sphere which can improve its mobility and reduce viscosity. This product has a melting point of 625 degrees Celsius and a true density 0.40 g/cm3. Hollow Glass Microspheres T40 improves flow properties and adj...展开 Hollow Glass Microspheres T40 is a small tiny sphere which can improve its mobility and reduce viscosity. This product has a melting point of 625 degrees Celsius and a true density 0.40 g/cm3. Hollow Glass Microspheres T40 improves flow properties and adjusts the density of paint. 收起 | |
| Hollow Glass Microspheres T46 | Anhui Elite Industrial Co., Ltd | Hollow Glass Microspheres T46 is a small tiny sphere which can improve its mobility and reduce viscosity. This product has a melting point of 625 degrees Celsius and a true density 0.46 g/cm3. Hollow Glass Microspheres T46 improves flow properties and adj...展开 Hollow Glass Microspheres T46 is a small tiny sphere which can improve its mobility and reduce viscosity. This product has a melting point of 625 degrees Celsius and a true density 0.46 g/cm3. Hollow Glass Microspheres T46 improves flow properties and adjusts the density of paint. 收起 | |
| Hollow Glass Microspheres T60 | Anhui Elite Industrial Co., Ltd | Hollow Glass Microspheres T60 is a small tiny sphere which can improve its mobility and reduce viscosity. This product has a melting point of 625 degrees Celsius and a true density 0.60 g/cm3. Hollow Glass Microspheres T60 improves flow properties and adj...展开 Hollow Glass Microspheres T60 is a small tiny sphere which can improve its mobility and reduce viscosity. This product has a melting point of 625 degrees Celsius and a true density 0.60 g/cm3. Hollow Glass Microspheres T60 improves flow properties and adjusts the density of paint. 收起 | |
| Hydrocarbon DCPD Resin HSU100 | Resin Chemicals Co., Ltd. | Hydrocarbon DCPD Resin HSU100 is a water-white thermoplastic resin produced from polymerization and hydrogenation of cyclic ingredients. This product is designed to provide good heat resistance and good compatibility with base polymers. It is often used a...展开 Hydrocarbon DCPD Resin HSU100 is a water-white thermoplastic resin produced from polymerization and hydrogenation of cyclic ingredients. This product is designed to provide good heat resistance and good compatibility with base polymers. It is often used as a tackifier for hot melt adhesives, hot melt pressure sensitive adhesives, and solvent-based pressure sensitive adhesives. 收起 | |
| Hydrocarbon Resin C5 HPE100A | Resin Chemicals Co., Ltd. | Hydrocarbon Resin C5 HPE100A is a raw material designed to provide light color, heat resistance, anti-oxidant properties, and bonding strength. This product is a yellow solid with a flake or bead-like appearance and is commonly used in the manufacturing o...展开 Hydrocarbon Resin C5 HPE100A is a raw material designed to provide light color, heat resistance, anti-oxidant properties, and bonding strength. This product is a yellow solid with a flake or bead-like appearance and is commonly used in the manufacturing of hot melt adhesives, pressure sensitive adhesives, and glue. 收起 | |
| Hydrocarbon Resin C5 HPE100A-L | Resin Chemicals Co., Ltd. | Hydrocarbon Resin C5 HPE100A-L is a raw material designed to provide light color, heat resistance, anti-oxidant properties, and bonding strength. This product is a yellow solid with a flake or bead-like appearance and is commonly used in the manufacturing...展开 Hydrocarbon Resin C5 HPE100A-L is a raw material designed to provide light color, heat resistance, anti-oxidant properties, and bonding strength. This product is a yellow solid with a flake or bead-like appearance and is commonly used in the manufacturing of hot melt adhesives, pressure sensitive adhesives, and glue. 收起 | |
| Hydrocarbon Resin C5 HPE100R | Resin Chemicals Co., Ltd. | Hydrocarbon Resin C5 HPE100R is a raw material used to provide resistance to crushing, abrasion, and smudge while providing fast drying properties. It has a Voc of 0.4 mg/m3 and a softening point of 98-102°C. This product is commonly applied in thermoplas...展开 Hydrocarbon Resin C5 HPE100R is a raw material used to provide resistance to crushing, abrasion, and smudge while providing fast drying properties. It has a Voc of 0.4 mg/m3 and a softening point of 98-102°C. This product is commonly applied in thermoplastic road-marking paints, bitumen road surfaces, asphalt, and cement road surfaces. 收起 | |
| Hydrocarbon Resin C5 HPE100R-S | Resin Chemicals Co., Ltd. | Hydrocarbon Resin C5 HPE100R-S is a raw material used to provide resistance to crushing, abrasion, and smudge while providing fast drying properties. It has a Voc of 0.8 mg/m3 and a softening point of 98-102°C. This product is commonly applied in thermopl...展开 Hydrocarbon Resin C5 HPE100R-S is a raw material used to provide resistance to crushing, abrasion, and smudge while providing fast drying properties. It has a Voc of 0.8 mg/m3 and a softening point of 98-102°C. This product is commonly applied in thermoplastic road-marking paints, bitumen road surfaces, asphalt, and cement road surfaces. 收起 | |
| Hydrocarbon Resin C9 HPE100P | Resin Chemicals Co., Ltd. | Hydrocarbon Resin C9 HPE100P is an aromatic, low molecular weight thermoplastic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide solubility, water resistance, insulation, low...展开 Hydrocarbon Resin C9 HPE100P is an aromatic, low molecular weight thermoplastic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide solubility, water resistance, insulation, low heat conduction, and chemical stability in adhesives, paints, and inks. It has a softening point of 90-110°C and is soluble in coal tars, esters, and turpentine oil. 收起 | |
| Hydrocarbon Resin C9 HPE100P-D | Resin Chemicals Co., Ltd. | Hydrocarbon Resin C9 HPE100P-D is an aromatic, low molecular weight thermoplastic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide solubility, water resistance, insulation, l...展开 Hydrocarbon Resin C9 HPE100P-D is an aromatic, low molecular weight thermoplastic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide solubility, water resistance, insulation, low heat conduction, and chemical stability in adhesives, paints, and inks. It has a softening point of 90-110°C and is soluble in coal tars, esters, and turpentine oil. 收起 | |
| Hydrocarbon Resin C9 HPE120P | Resin Chemicals Co., Ltd. | Hydrocarbon Resin C9 HPE120P is an aromatic, low molecular weight thermoplastic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide solubility, water resistance, insulation, low...展开 Hydrocarbon Resin C9 HPE120P is an aromatic, low molecular weight thermoplastic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide solubility, water resistance, insulation, low heat conduction, and chemical stability in adhesives, paints, and inks. It has a softening point of 110-140°C and is soluble in coal tars, esters, and turpentine oil. 收起 | |
| Hydrocarbon Resin C9 HPE120P-D | Resin Chemicals Co., Ltd. | Hydrocarbon Resin C9 HPE120P-D is an aromatic, low molecular weight thermoplastic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide solubility, water resistance, insulation, l...展开 Hydrocarbon Resin C9 HPE120P-D is an aromatic, low molecular weight thermoplastic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide solubility, water resistance, insulation, low heat conduction, and chemical stability in adhesives, paints, and inks. It has a softening point of 110-140°C and is soluble in coal tars, esters, and turpentine oil. 收起 | |
| Hydrocarbon Resin C9 HPE120PL | Resin Chemicals Co., Ltd. | Hydrocarbon Resin C9 HPE120PL is a low molecular weight thermoplastic aromatic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide good solubility, water resistance, insulation,...展开 Hydrocarbon Resin C9 HPE120PL is a low molecular weight thermoplastic aromatic resin produced from petroleum derived C9 fraction through a catalytic-polymerization process. This product is designed to provide good solubility, water resistance, insulation, low heat conduction, and chemical stability in adhesives, paints, and inks. It has a softening point of 115-125°C and is soluble in coal tars, esters, and turpentine oil. 收起 | |
| Hydrogenated Hydrocarbon Resin C5 HPE100H | Resin Chemicals Co., Ltd. | Hydrogenated Hydrocarbon Resin C5 HPE100H is a hydrogenated hydrocarbon resin designed to provide light color, heat resistance, anti-oxidant properties, and bonding strength. This product is slight yellow transparent flakes or beads in appearance and is c...展开 Hydrogenated Hydrocarbon Resin C5 HPE100H is a hydrogenated hydrocarbon resin designed to provide light color, heat resistance, anti-oxidant properties, and bonding strength. This product is slight yellow transparent flakes or beads in appearance and is commonly used in the manufacturing of hot melt adhesives, pressure sensitive adhesives, and glue. 收起 | |
| Hydrogenated Hydrocarbon Resin C9 HFM-100 | Resin Chemicals Co., Ltd. | Hydrogenated Hydrocarbon Resin C9 HFM-100 is a water-white hydrogenated hydrocarbon resin designed to provide light color, low melt-viscosity, narrow molecular weight distribution, and excellent thermal stability. This product is commonly used in the manu...展开 Hydrogenated Hydrocarbon Resin C9 HFM-100 is a water-white hydrogenated hydrocarbon resin designed to provide light color, low melt-viscosity, narrow molecular weight distribution, and excellent thermal stability. This product is commonly used in the manufacturing of hot melt adhesives and solvent-based pressure sensitive adhesives. 收起 | |
| Hydrogenated Rosin Ester | Resin Chemicals Co., Ltd. | Hydrogenated Rosin Ester HGE100 is a glycerol ester of hydrogenated rosin. This product is commonly used in applications such as screen protection film, diaper adhesive, pressure sensitive adhesive, and hot melt adhesives. It can provide super light color...展开 Hydrogenated Rosin Ester HGE100 is a glycerol ester of hydrogenated rosin. This product is commonly used in applications such as screen protection film, diaper adhesive, pressure sensitive adhesive, and hot melt adhesives. It can provide super light color, low odor, good heat stability, and excellent aging resistance. 收起 | |
| Hydrogenated Rosin-A | Resin Chemicals Co., Ltd. | Hydrogenated Rosin-A is a raw material that is commonly used in the manufacturing of adhesives, inks, and coatings. This product is transparent in appearance with a maximum abietic acid content of 2.0% and a softening point of 76°C. | |
| Hydrogenated Rosin-B | Resin Chemicals Co., Ltd. | Hydrogenated Rosin-B is a raw material that is commonly used in the manufacturing of adhesives, inks, and coatings. This product is transparent in appearance with a maximum abietic acid content of 2.0% and a softening point of 76°C. | |
| Hydrogenated Rosin-C | Resin Chemicals Co., Ltd. | Hydrogenated Rosin-C is a raw material that is commonly used in the manufacturing of adhesives, inks, and coatings. This product is transparent in appearance with a maximum abietic acid content of 2.0% and a softening point of 76°C. | |
| Hydrogenated Rosin-D | Resin Chemicals Co., Ltd. | Hydrogenated Rosin-D is a raw material that is commonly used in the manufacturing of adhesives, inks, and coatings. This product is transparent in appearance with a maximum abietic acid content of 2.0% and a softening point of 76°C. | |
| Liquid Rosin Ester LRE-1 | Resin Chemicals Co., Ltd. | Liquid Rosin Ester LRE-1 is a liquid rosin resin created from gum rosin through esterification with polyol. This product is commonly used in applications such as solvent-based PSA, adhesive tapes, and glue. | |
| Polyamide Resin | Anhui Elite Industrial Co., Ltd | Polyamide Resin is a kind of alcohol solvent polyamide resin, which has marvelous solvent liberation extremely good alcohol solubility, good compatibility with NC , superior freezing, water and gel resistance, good gloss, fluidity and pigment wetting prop...展开 Polyamide Resin is a kind of alcohol solvent polyamide resin, which has marvelous solvent liberation extremely good alcohol solubility, good compatibility with NC , superior freezing, water and gel resistance, good gloss, fluidity and pigment wetting property. It has applications in various gravure plastic printing ink, plastic flexibility issue printing, overprinting varnish and heat seal coating and heating seal beaded paint. 收起 | |
| Polyketone Resin | Anhui Elite Industrial Co., Ltd | Polyketone Resin is a non-toxic and light-cloured, hard resin with high photo-stability. This product is soluble in any solvent used in the coating industry with the exception of fatty alkane and water, and it may also be mixed and solved with many resin...展开 Polyketone Resin is a non-toxic and light-cloured, hard resin with high photo-stability. This product is soluble in any solvent used in the coating industry with the exception of fatty alkane and water, and it may also be mixed and solved with many resins used in paint and inks. Polyketon Resin provides glossiness, adhesion, wettabillity, and hardness to paints, coatings, and inks. 收起 | |
| Polymerized Rosin | Resin Chemicals Co., Ltd. | Polymerized Rosin is a modified product consisting of gum rosin and abietic type acids. This product is used to provide a high softening point, oxidation resistance, and high viscosity in organic solvents. It is commonly used in inks, oil paints, adhesive...展开 Polymerized Rosin is a modified product consisting of gum rosin and abietic type acids. This product is used to provide a high softening point, oxidation resistance, and high viscosity in organic solvents. It is commonly used in inks, oil paints, adhesives, and emulsifying agents. It is a transparent solid in appearance with a softening point of 140-165°C. 收起 | |
| R-1 Rutile Powder | CPM Industries, Inc. | R-1 Rutile Powder is a non-pigment rutile titanium dioxide powder that exhibits relatively high surface area. This product is a 99.0% minimum purity powder with a mean particle size of 3 to 5 microns. It is ideal for use in the production of electro-ceram...展开 R-1 Rutile Powder is a non-pigment rutile titanium dioxide powder that exhibits relatively high surface area. This product is a 99.0% minimum purity powder with a mean particle size of 3 to 5 microns. It is ideal for use in the production of electro-ceramics, specialty glass, fiberglass, engineered ceramics, and coated welding rods. 收起 | |
| R-500 Rutile Pigment | CPM Industries, Inc. | R-500 Rutile Pigment is a rutile titanium dioxide pigment that is ideal for application in water and solvent based systems requiring limited weathering resistance.This product is often used in applications including interior coatings, road marking paint, ...展开 R-500 Rutile Pigment is a rutile titanium dioxide pigment that is ideal for application in water and solvent based systems requiring limited weathering resistance.This product is often used in applications including interior coatings, road marking paint, and powder coatings. It is a multipurpose pigment with a 98% minimum TiO2 content and no surface treatment. 收起 | |
| R-501 Rutile Pigment | CPM Industries, Inc. | R-501 Rutile Pigment is a rutile titanium dioxide pigment that provides good whiteness, hiding power, and limited weathering resistance in trade sales paint and road marking paint. This product contains 98% minimum TiO2 plus an organic surface treatment t...展开 R-501 Rutile Pigment is a rutile titanium dioxide pigment that provides good whiteness, hiding power, and limited weathering resistance in trade sales paint and road marking paint. This product contains 98% minimum TiO2 plus an organic surface treatment to ease dispersion in solvent based systems. 收起 | |
| R-502 Rutile Pigment | CPM Industries, Inc. | R-502 Rutile Pigment is a rutile titanium dioxide pigment that provides good whiteness and hiding power with applications in water based enamel paints requiring limited weathering resistance. This product contains 98% minimum TiO2 plus an organic surface ...展开 R-502 Rutile Pigment is a rutile titanium dioxide pigment that provides good whiteness and hiding power with applications in water based enamel paints requiring limited weathering resistance. This product contains 98% minimum TiO2 plus an organic surface treatment to ease dispersion in water based systems. 收起 | |
| R-601 Rutile Pigment | CPM Industries, Inc. | R-601 Rutile Pigment is a rutile titanium dioxide pigment that is ideal for use in solvent based printing inks, powder coatings, and exterior coatings. This product is a multipurpose pigment with a 93% minimum TiO2 content plus alumina and silica inorgani...展开 R-601 Rutile Pigment is a rutile titanium dioxide pigment that is ideal for use in solvent based printing inks, powder coatings, and exterior coatings. This product is a multipurpose pigment with a 93% minimum TiO2 content plus alumina and silica inorganic and amphiphilic organic surface treatments. 收起 | |
| R-602 Rutile Pigment | CPM Industries, Inc. | R-602 Rutile Pigment is a rutile titanium dioxide pigment that is ideal for use in water based paints. This product contains 93% minimum TiO2 with silica and alumina inorganic and hydrophilic organic surface treatments. | |
| R-606 Rutile Universal Pigment | CPM Industries, Inc. | R-606 Rutile Universal Pigment is a rutile titanium dioxide pigment that is ideal for application in paints, coatings and inks. This product contains 93% minimum TiO2 plus aluminum and zirconium surface treatments. It is a universal pigment designed for s...展开 R-606 Rutile Universal Pigment is a rutile titanium dioxide pigment that is ideal for application in paints, coatings and inks. This product contains 93% minimum TiO2 plus aluminum and zirconium surface treatments. It is a universal pigment designed for superior durability and stability, high gloss and opacity, and excellent dispersibility. 收起 | |
| Refined Gum Rosin | Resin Chemicals Co., Ltd. | Refined Gum Rosin is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a light colored, transparent solid in appearance with a softening point of 76°C. This product is used to provide special chemical act...展开 Refined Gum Rosin is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a light colored, transparent solid in appearance with a softening point of 76°C. This product is used to provide special chemical activity in the production of coatings, inks, and rosin ester resins. 收起 | |
| Refined Rosin Modified Resin GE-85L | Resin Chemicals Co., Ltd. | Refined Rosin Modified Resin GE-85L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 85-88°C. This product is comm...展开 Refined Rosin Modified Resin GE-85L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 85-88°C. This product is commonly used in the production and manufacturing of hot melt adhesives, pressure sensitive adhesives, and high class glues. 收起 | |
| Refined Rosin Modified Resin GE-90L | Resin Chemicals Co., Ltd. | Refined Rosin Modified Resin GE-90L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 87-93°C. This product is comm...展开 Refined Rosin Modified Resin GE-90L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 87-93°C. This product is commonly used in the production and manufacturing of hot melt adhesives, pressure sensitive adhesives, and high class glues. 收起 | |
| Refined Rosin Modified Resin PE-100L | Resin Chemicals Co., Ltd. | Refined Rosin Modified Resin PE-100L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 97-103°C. This product is co...展开 Refined Rosin Modified Resin PE-100L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 97-103°C. This product is commonly used in the production and manufacturing of hot melt adhesives, pressure sensitive adhesives, and high class glues. 收起 | |
| Refined Rosin Modified Resin PE-105L | Resin Chemicals Co., Ltd. | Refined Rosin Modified Resin PE-105L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 102-108°C. This product is c...展开 Refined Rosin Modified Resin PE-105L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 102-108°C. This product is commonly used in the production and manufacturing of hot melt adhesives, pressure sensitive adhesives, and high class glues. 收起 | |
| Refined Rosin Modified Resin PE-95L | Resin Chemicals Co., Ltd. | Refined Rosin Modified Resin PE-95L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 92-98°C. This product is comm...展开 Refined Rosin Modified Resin PE-95L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 92-98°C. This product is commonly used in the production and manufacturing of hot melt adhesives, pressure sensitive adhesives, and high class glues. 收起 | |
| Rosin Modified Maleic Resin MR-130 | Resin Chemicals Co., Ltd. | Rosin Modified Maleic Resin MR-130 is a raw material that is esterified by the addition of gum rosin, maleic anhydride, glycerol or pentaerythritol. It is transparent to pale yellow flakes in appearance with a Gardner grade color of 3-4. This product is u...展开 Rosin Modified Maleic Resin MR-130 is a raw material that is esterified by the addition of gum rosin, maleic anhydride, glycerol or pentaerythritol. It is transparent to pale yellow flakes in appearance with a Gardner grade color of 3-4. This product is used to provide light color production and retention in nitrocellulose lacquers and inks. 收起 | |
| Rosin Modified Maleic Resin MR-130D | Resin Chemicals Co., Ltd. | Rosin Modified Maleic Resin MR-130D is a raw material that is esterified by the addition of gum rosin, maleic anhydride, glycerol or pentaerythritol. It is transparent to pale yellow flakes in appearance with a Gardner grade color of 5-8. This product is ...展开 Rosin Modified Maleic Resin MR-130D is a raw material that is esterified by the addition of gum rosin, maleic anhydride, glycerol or pentaerythritol. It is transparent to pale yellow flakes in appearance with a Gardner grade color of 5-8. This product is used to provide light color production and retention in nitrocellulose lacquers and inks. 收起 | |
| Rosin Modified Maleic Resin MR115R | Resin Chemicals Co., Ltd. | Rosin Modified Maleic Resin MR115R is a solid adduct of gum rosin and maleic anhydride created through the esterification of glycerol. It is pale, yellow solid flakes in appearance with a softening point of 112-117°C. This product is commonly used to prov...展开 Rosin Modified Maleic Resin MR115R is a solid adduct of gum rosin and maleic anhydride created through the esterification of glycerol. It is pale, yellow solid flakes in appearance with a softening point of 112-117°C. This product is commonly used to provide resistance to abrasion, crocking, and crushing while providing leveling and fast drying in traffic marking paints. 收起 | |
| Rosin Modified Maleic Resin MR120R | Resin Chemicals Co., Ltd. | Rosin Modified Maleic Resin MR120R is a solid adduct of gum rosin and maleic anhydride created through the esterification of glycerol. It is pale, yellow solid flakes in appearance with a softening point of 117-123°C. This product is commonly used to prov...展开 Rosin Modified Maleic Resin MR120R is a solid adduct of gum rosin and maleic anhydride created through the esterification of glycerol. It is pale, yellow solid flakes in appearance with a softening point of 117-123°C. This product is commonly used to provide resistance to abrasion, crocking, and crushing while providing leveling and fast drying in traffic marking paints. 收起 | |
| Rosin Modified Maleic Resin MR125R | Resin Chemicals Co., Ltd. | Rosin Modified Maleic Resin MR125R is a solid adduct of gum rosin and maleic anhydride created through the esterification of glycerol. It is pale, yellow solid flakes in appearance with a softening point of 122-128°C. This product is commonly used to prov...展开 Rosin Modified Maleic Resin MR125R is a solid adduct of gum rosin and maleic anhydride created through the esterification of glycerol. It is pale, yellow solid flakes in appearance with a softening point of 122-128°C. This product is commonly used to provide resistance to abrasion, crocking, and crushing while providing leveling and fast drying in traffic marking paints. 收起 | |
| Rosin Modified Phenolic Resin PI116 | Resin Chemicals Co., Ltd. | Rosin Modified Phenolic Resin PI116 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 1500-2200 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展开 Rosin Modified Phenolic Resin PI116 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 1500-2200 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起 | |
| Rosin Modified Phenolic Resin PI118 | Resin Chemicals Co., Ltd. | Rosin Modified Phenolic Resin PI118 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 2000-2800 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展开 Rosin Modified Phenolic Resin PI118 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 2000-2800 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起 | |
| Rosin Modified Phenolic Resin PI136 | Resin Chemicals Co., Ltd. | Rosin Modified Phenolic Resin PI136 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 1600-2500 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展开 Rosin Modified Phenolic Resin PI136 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 1600-2500 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起 | |
| Rosin Modified Phenolic Resin PI138 | Resin Chemicals Co., Ltd. | Rosin Modified Phenolic Resin PI138 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 2400-3200 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展开 Rosin Modified Phenolic Resin PI138 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 2400-3200 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起 | |
| Rosin Modified Phenolic Resin PI142 | Resin Chemicals Co., Ltd. | Rosin Modified Phenolic Resin PI142 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 1500-2500 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展开 Rosin Modified Phenolic Resin PI142 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 1500-2500 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起 | |
| Rosin Modified Phenolic Resin PI145 | Resin Chemicals Co., Ltd. | Rosin Modified Phenolic Resin PI145 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 500-900 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used...展开 Rosin Modified Phenolic Resin PI145 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 500-900 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起 | |
| Rosin Modified Phenolic Resin PI146 | Resin Chemicals Co., Ltd. | Rosin Modified Phenolic Resin PI146 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 1300-1800 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展开 Rosin Modified Phenolic Resin PI146 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 1300-1800 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起 | |
| Rosin Modified Phenolic Resin PI147 | Resin Chemicals Co., Ltd. | Rosin Modified Phenolic Resin PI147 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 5500-8500 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展开 Rosin Modified Phenolic Resin PI147 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 5500-8500 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起 | |
| Rosin Modified Phenolic Resin PI148 | Resin Chemicals Co., Ltd. | Rosin Modified Phenolic Resin PI148 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 3500-5000 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展开 Rosin Modified Phenolic Resin PI148 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 3500-5000 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起 | |
| Rosin Modified Phenolic Resin PI149 | Resin Chemicals Co., Ltd. | Rosin Modified Phenolic Resin PI149 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 3000-4500 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展开 Rosin Modified Phenolic Resin PI149 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 3000-4500 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起 | |
| Rosin Modified Phenolic Resin PI152 | Resin Chemicals Co., Ltd. | Rosin Modified Phenolic Resin PI152 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 3800-5000 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展开 Rosin Modified Phenolic Resin PI152 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 3800-5000 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起 | |
| Rosin Modified Phenolic Resin PI155 | Resin Chemicals Co., Ltd. | Rosin Modified Phenolic Resin PI155 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 1800-2500 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展开 Rosin Modified Phenolic Resin PI155 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 1800-2500 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起 | |
| Rosin Modified Phenolic Resin PI160 | Resin Chemicals Co., Ltd. | Rosin Modified Phenolic Resin PI160 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 10000-14000 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly ...展开 Rosin Modified Phenolic Resin PI160 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 10000-14000 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起 |
