| 2-Ethylhexanoic Acid | Penpet Petrochemical Trading GmbH | 2-Ethylhexanoic Acid, in the form of a dense, clear, colourless to yellow liquid with a faint odour, is a catalyst that can be used in the dye and paint, and printing ink industry. This product is insoluble in water but is soluble in almost all conventio...展开 2-Ethylhexanoic Acid, in the form of a dense, clear, colourless to yellow liquid with a faint odour, is a catalyst that can be used in the dye and paint, and printing ink industry. This product is insoluble in water but is soluble in almost all conventional solvents. Most of its siccatives are metal salts that can be used as drying agents. 收起 | |
| 3-(Trimethoxysilyl)propyl Glycidyl Ether | Penpet Petrochemical Trading GmbH | 3-(Trimethoxysilyl)propyl Glycidyl Ether, in the form of a clear, pale yellow liquid, is an epoxy-functional silane that can be used in polyurethane caulks and sealants. This product can also be used as a coupling agent in polysulfides, in mineral-filled...展开 3-(Trimethoxysilyl)propyl Glycidyl Ether, in the form of a clear, pale yellow liquid, is an epoxy-functional silane that can be used in polyurethane caulks and sealants. This product can also be used as a coupling agent in polysulfides, in mineral-filled or glass-reinforced thermosets and thermoplastics. 收起 | |
| Acetone | Penpet Petrochemical Trading GmbH | Acetone, in the form of a colourless, clear liquid, is a basic raw material in the chemical industry that can be used in paint thinner. This product is soluble in water and is usually used as a laboratory solvent. | |
| Adipic Acid | Penpet Petrochemical Trading GmbH | Adipic Acid, in the form of a white crystalline powder, is a dicarbon acid and an intermediate in the production of nylon. It can be used in adhesives, plasticizers, and as a dyestuff or coloring agent. This product is a primary intermediate for the syn...展开 Adipic Acid, in the form of a white crystalline powder, is a dicarbon acid and an intermediate in the production of nylon. It can be used in adhesives, plasticizers, and as a dyestuff or coloring agent. This product is a primary intermediate for the synthesis of polyetherpolyole for polyurethane systems and for thermoplastic polyurethane. 收起 | |
| Diisodecylphthalate | Penpet Petrochemical Trading GmbH | Diisodecylphthalate, in the form of a colourless and nearly odourless fluid, is an organic compound that can be used in glues, paints, solvents and sealants. This product is normally used as a plasticizer for PVC. | |
| Diisononyl Phthalate (DINP) | Penpet Petrochemical Trading GmbH | Diisononyl Phthalate (DINP), in the form of a colourless and a nearly odourless fluid, is a phthalate and an organic chemical compound that can be used in glues, paints, solvents, and sealants. This product is mostly used as a plasticizer for PVC. | |
| Dioctylphthalate (DOTP) | Penpet Petrochemical Trading GmbH | Dioctylphthalate (DOTP), in the form of a colorless, odourless fluid, is a phthalate and an organic chemical compound. This product can be used in solvents and varnish. It is normally used as a plasticizer. | |
| Epoxidized Soybean Oil (ESBO) | Penpet Petrochemical Trading GmbH | Epoxidized Soybean Oil (ESBO), in the form of a light yellow, thick, oily liquid, is a plasticizer than can be used in oil paints, adhesives, and printing inks. This product is derived from soybean oil through the reaction of unsaturated compounds with p...展开 Epoxidized Soybean Oil (ESBO), in the form of a light yellow, thick, oily liquid, is a plasticizer than can be used in oil paints, adhesives, and printing inks. This product is derived from soybean oil through the reaction of unsaturated compounds with peracids. Its boiling point is 150°C with an ignition point at 310°C. 收起 | |
| Fintac2331 Non-Crystallizing Rosin | Finjet Chemical Industries, Ltd. | Fintac2331 Non-Crystallizing Rosin, in the form of a solid or flake, is a modified rosin that offers good combination of crystallization resistance and oxidation. This product is applied as a tackifier for polymers, and has suggested applications in water...展开 Fintac2331 Non-Crystallizing Rosin, in the form of a solid or flake, is a modified rosin that offers good combination of crystallization resistance and oxidation. This product is applied as a tackifier for polymers, and has suggested applications in water-based adhesives, pressure sensitive sealants, and alcohol soluble printing inks and paints. 收起 | |
| Fintac2333 Modified Rosin Resin | Finjet Chemical Industries, Ltd. | Fintac2333 Modified Rosin Resin is a low odor, non-crystallization rosin resin that is used to formulate numerous kinds of water-based and hot melt adhesives, effectively improving their original low temperature property and adhesion. This product is also...展开 Fintac2333 Modified Rosin Resin is a low odor, non-crystallization rosin resin that is used to formulate numerous kinds of water-based and hot melt adhesives, effectively improving their original low temperature property and adhesion. This product is also applicable for alcohol soluble paints and inks. 收起 | |
| Fintac5336 Polymerized Rosin | Finjet Chemical Industries, Ltd. | Fintac5336 Polymerized Rosin is a selectively polymerized rosin that has a higher softening point, good oxidation resistance, and higher heat resistance to adhesives. This product is mainly applied in adhesives, inks, synthetic resins, varnishes, and pain...展开 Fintac5336 Polymerized Rosin is a selectively polymerized rosin that has a higher softening point, good oxidation resistance, and higher heat resistance to adhesives. This product is mainly applied in adhesives, inks, synthetic resins, varnishes, and paints. 收起 | |
| Fumaric Acid | Penpet Petrochemical Trading GmbH | Fumaric Acid, in the form of a colourless fluid, is produced by the isomerization of maleic acid. This product can be used in paper sizing and in glues. It is sometimes known as 2-Butendioic acid and can also be used in synthetic resins, unsaturated pol...展开 Fumaric Acid, in the form of a colourless fluid, is produced by the isomerization of maleic acid. This product can be used in paper sizing and in glues. It is sometimes known as 2-Butendioic acid and can also be used in synthetic resins, unsaturated polyester resins, and in lubricants. 收起 | |
| GR-1173 | Hubei Gurun Technology Co., Ltd. | GR-1173 is a yellowish liquid photoinitiator with high-efficiency and anti-yellowing. This product is commonly applied to overprint varnish and coatings for wood, plastics and metal. | |
| GR-184 | Hubei Gurun Technology Co., Ltd. | GR-184 is a white powder with strong thermal stability and anti-yellowing photoinitiator. This product is commonly used in overprint varnish and coatings for wood, plastics and metal. | |
| GR-369 | Hubei Gurun Technology Co., Ltd. | GR-369 is a yellowish powder and photoinitiator that contains quick photocuring and high sensitivity. This product has applications offset inks, screen inks, flexo inks and inkjet inks. | |
| GR-907 | Hubei Gurun Technology Co., Ltd. | GR-907 is a white powder and a photoinitiator with quick photocuring speed, high sensitivity and low odor. This product can be applied to offset inks, screen inks, flexo inks and inkjet inks. | |
| GR-DVE | Hubei Gurun Technology Co., Ltd. | GR-DVE is a yellowish clear liquid and a vinyl etheric double functional monomer with low toxicity, quick curing speed, no oxygen interference, little shrinkage and strong cure and toughness properties. This product is commonly applied to cationic photocu...展开 GR-DVE is a yellowish clear liquid and a vinyl etheric double functional monomer with low toxicity, quick curing speed, no oxygen interference, little shrinkage and strong cure and toughness properties. This product is commonly applied to cationic photocurable coatings, adhesives, elastomers, printing inks and more enabling better photopolymerization performance. 收起 | |
| GR-FMT | Hubei Gurun Technology Co., Ltd. | GR-FMT is an orange powder and a photoinitiator with high sensitivity used for curing of thick layers, including layers thicker than 70 µm, and dark photocuring coatings. This product's absorption wavelength can reach 560 nm and can also be used for UV c...展开 GR-FMT is an orange powder and a photoinitiator with high sensitivity used for curing of thick layers, including layers thicker than 70 µm, and dark photocuring coatings. This product's absorption wavelength can reach 560 nm and can also be used for UV coating, printing ink and adhesive. 收起 | |
| GR-ITX | Hubei Gurun Technology Co., Ltd. | GR-ITX is a yellowish powder and photoinitiator that contains quick photocuring and photoinitiating. This product is for use in clear and colorful UV coating or ink, offset inks, screen inks, flexo inks and inkjet inks. | |
| GR-PAG-2 | Hubei Gurun Technology Co., Ltd. | GR-PAG-2 is a yellow brown powder and a cationic type photoinitiator with strong thermal stability, high solubility and light controllability. This product is used in cationic photocuring and chemical acid agile amplification imagery systems. | |
| GR-PS-1 | Hubei Gurun Technology Co., Ltd. | GR-PS-1 is a yellow crystal powder and a photosensitizer with strong thermal stability, photoinitiating and sensitivity promotion. This product is used to promote UV coating and applied to high sensitive printing plate photosensitive coating, negative pho...展开 GR-PS-1 is a yellow crystal powder and a photosensitizer with strong thermal stability, photoinitiating and sensitivity promotion. This product is used to promote UV coating and applied to high sensitive printing plate photosensitive coating, negative photoresist and other sensitive material. 收起 | |
| GR-TPO | Hubei Gurun Technology Co., Ltd. | GR-TPO is a yellowish powder used as a photoinitiator. This product has quick photocuring speed, can be applied to thick layers of photocuring coatings, contain low-volatility, low odor and anti-yellowing. | |
| GR-VE/A | Hubei Gurun Technology Co., Ltd. | GR-VE/A is a yellowish clear liquid and a vinyl ether/acrylyl cationic/free-radical mixed monomer with low toxicity, quick curing speed, low oxygen interference, little shrinkage and strong cure and toughness properties. This product is commonly applied t...展开 GR-VE/A is a yellowish clear liquid and a vinyl ether/acrylyl cationic/free-radical mixed monomer with low toxicity, quick curing speed, low oxygen interference, little shrinkage and strong cure and toughness properties. This product is commonly applied to cationic/free-radical photocurable coatings, adhesives, elastomers, printing inks and more enabling better photopolymerization performance. 收起 | |
| GR-VE/VP | Hubei Gurun Technology Co., Ltd. | GR-VE/VP is a yellowish clear liquid and a vinyl ether/allyl cationic/free-radical mixed monomer with low toxicity, quick curing speed, low oxygen interference, little shrinkage and strong cure and toughness properties. This product is commonly applied to...展开 GR-VE/VP is a yellowish clear liquid and a vinyl ether/allyl cationic/free-radical mixed monomer with low toxicity, quick curing speed, low oxygen interference, little shrinkage and strong cure and toughness properties. This product is commonly applied to cationic/free-radical photocurable coatings, adhesives, elastomers, printing inks and more enabling better photopolymerization performance. 收起 | |
| GR-XBPO | Hubei Gurun Technology Co., Ltd. | GR-XBPO is a yellowish powder and a photoinitiator good for thick layers of photocuring coatings with anti-yellowing, low-volatility, low odor and good solubility. This product's absorption wavelength can reach 450 nm and can also be used for resistant UV...展开 GR-XBPO is a yellowish powder and a photoinitiator good for thick layers of photocuring coatings with anti-yellowing, low-volatility, low odor and good solubility. This product's absorption wavelength can reach 450 nm and can also be used for resistant UV varnish, many coatings, adhesive, offset printing ink, screen printing ink and flexo ink. 收起 | |
| HESS NCS-10 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-10 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-10 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-12 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-12 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-12 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-15 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-15 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resist...展开 HESS NCS-15 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-3 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-3 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-3 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-5 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-5 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-5 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| HESS NCS-8 | Hess Pumice (NCS) Microfine Functional Fillers | HESS NCS-8 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resista...展开 HESS NCS-8 is a non-crystalline silica (NCS) made from pure, white pumice. It can be used as a functional filler and extender in paints and coatings. This product is inert, near white, has a pH of 7.2, and has outstanding scrub, burnish, and stain resistance properties due to the hardness of the particles. 收起 | |
| Isobutanol | Penpet Petrochemical Trading GmbH | Isobutanol, in the form of a colourless, oily liquid, is an industrial solvent that can be used in paints and coatings. When used in paint, it contributes to reduced viscosity and improves the brush flow of the end product. It also retards the formation...展开 Isobutanol, in the form of a colourless, oily liquid, is an industrial solvent that can be used in paints and coatings. When used in paint, it contributes to reduced viscosity and improves the brush flow of the end product. It also retards the formation of oil residue. Isobutanol can also be used as a solvent in paint and varnish removers. 收起 | |
| Isophorone | Penpet Petrochemical Trading GmbH | Isophorone, in the form of a clear fluid having a peppermint odour, is an industrial solvent in the coatings, inks, and adhesive industries. This product can be used in synthesis for the production of isophorone diamine, isophorone diisocyanate and 3,5-d...展开 Isophorone, in the form of a clear fluid having a peppermint odour, is an industrial solvent in the coatings, inks, and adhesive industries. This product can be used in synthesis for the production of isophorone diamine, isophorone diisocyanate and 3,5-dimethylphenol. 收起 | |
| Isophthalic Acid | Penpet Petrochemical Trading GmbH | Isophthalic acid, in the form of a colourless crystalline powder, is an organic compound that can be used in paints and coatings. This product is insoluble in cold water and is barely soluble in boiling water. This product has a molecular weight of 166....展开 Isophthalic acid, in the form of a colourless crystalline powder, is an organic compound that can be used in paints and coatings. This product is insoluble in cold water and is barely soluble in boiling water. This product has a molecular weight of 166.14 and its melting point starts between 345 and 348°C. 收起 | |
| Isopropanol | Penpet Petrochemical Trading GmbH | Isopropanol, in the form of a colourless, clear liquid, is a highly concentrated alcohol that can be used as a solvent for adhesives, paints, and inks. This product is often used as a substitute for ethanol. It is often a constituent of disinfectant sol...展开 Isopropanol, in the form of a colourless, clear liquid, is a highly concentrated alcohol that can be used as a solvent for adhesives, paints, and inks. This product is often used as a substitute for ethanol. It is often a constituent of disinfectant solutions because it can quickly and easily clean surfaces, and evaporates without leaving a residue. 收起 | |
| Maleic Anhydride, Briquets | Penpet Petrochemical Trading GmbH | Maleic Anhydride, Briquets, in the form of a colourless to white powder with an acrid odour, is a versatile intermediate that can be used in alkyd resins for paints and coatings. This product is soluble in water and has a melting point at 53°C. Its boil...展开 Maleic Anhydride, Briquets, in the form of a colourless to white powder with an acrid odour, is a versatile intermediate that can be used in alkyd resins for paints and coatings. This product is soluble in water and has a melting point at 53°C. Its boiling point is 202°C and auto-ignites at 477°C. This product is available in flakes, briquets, pastilles or in liquid form. 收起 | |
| Maleic Anhydride, Flakes | Penpet Petrochemical Trading GmbH | Maleic Anhydride, Flakes, in the form of a colourless to white powder with an acrid odour, is a versatile intermediate that can be used in alkyd resins for paints and coatings. This product is soluble in water and has a melting point at 53°C. Its boilin...展开 Maleic Anhydride, Flakes, in the form of a colourless to white powder with an acrid odour, is a versatile intermediate that can be used in alkyd resins for paints and coatings. This product is soluble in water and has a melting point at 53°C. Its boiling point is 202°C and auto-ignites at 477°C. This product is available in flakes, briquets, pastilles or in liquid form. 收起 | |
| Maleic Anhydride, Liquid | Penpet Petrochemical Trading GmbH | Maleic Anhydride, Liquid, in the form of a colourless liquid with an acrid odour, is a versatile intermediate that can be used in alkyd resins for paints and coatings. This product is soluble in water and has a melting point at 53°C. Its boiling point i...展开 Maleic Anhydride, Liquid, in the form of a colourless liquid with an acrid odour, is a versatile intermediate that can be used in alkyd resins for paints and coatings. This product is soluble in water and has a melting point at 53°C. Its boiling point is 202°C and auto-ignites at 477°C. This product is available in flakes, briquets, pastilles or in liquid form. 收起 | |
| Maleic Anhydride, Pastilles | Penpet Petrochemical Trading GmbH | Maleic Anhydride, Pastilles, in the form of a colourless to white powder with an acrid odour, is a versatile intermediate that can be used in alkyd resins for paints and coatings. This product is soluble in water and has a melting point at 53°C. Its boi...展开 Maleic Anhydride, Pastilles, in the form of a colourless to white powder with an acrid odour, is a versatile intermediate that can be used in alkyd resins for paints and coatings. This product is soluble in water and has a melting point at 53°C. Its boiling point is 202°C and auto-ignites at 477°C. This product is available in flakes, briquets, pastilles or in liquid form. 收起 | |
| Methylhexahydrophthalic Anhydride | Penpet Petrochemical Trading GmbH | Methylhexahydrophthalic Anhydride, in the form of a colorless liquid, is an aromatic compound that can be used as a raw material for adhesive resins. This product is produced by hydrogenation from Methyltetrahydrophthalic Anhydride (MTHPA). It is also k...展开 Methylhexahydrophthalic Anhydride, in the form of a colorless liquid, is an aromatic compound that can be used as a raw material for adhesive resins. This product is produced by hydrogenation from Methyltetrahydrophthalic Anhydride (MTHPA). It is also known as hexahydromethylphthalic anhydride. 收起 | |
| n-Butanol | Penpet Petrochemical Trading GmbH | N-Butanol, in the form of a colourless liquid with a characteristic odour reminiscent of banana, is a butyl alcohol that can be used in floor polishes and cleaners, and as a solvent in paints, varnishes, resins, and coatings. This product is a four-carbo...展开 N-Butanol, in the form of a colourless liquid with a characteristic odour reminiscent of banana, is a butyl alcohol that can be used in floor polishes and cleaners, and as a solvent in paints, varnishes, resins, and coatings. This product is a four-carbon linear hydrocarbon with a hydroxy group at position 1. It is miscible in common solvents but is only slightly soluble in water. 收起 | |
| Neopentyl Glycol (NPG), Flakes | Penpet Petrochemical Trading GmbH | Neopentyl Glycol (NPG), Flakes, in the form of a clear flake, is a polyalcohol that can be used in resins for powder coatings and glues. This product is normally used in the production of polyester resins. | |
| Neopentyl Glycol (NPG), Solution | Penpet Petrochemical Trading GmbH | Neopentyl Glycol (NPG), Solution, in the form of a 90% solution, is a polyalcohol that can be used in resins for powder coatings and glues. This product is normally used in the production of polyester resins. | |
| Pentaerythritol | Penpet Petrochemical Trading GmbH | Pentaerythritol, in the form of a white, crystalline, and odourless powder, is a component of resin esters that can be used in paints, coatings, printing inks, varnishes, floor coverings, and adhesives. This product has a molar mass of 136.15 and a densi...展开 Pentaerythritol, in the form of a white, crystalline, and odourless powder, is a component of resin esters that can be used in paints, coatings, printing inks, varnishes, floor coverings, and adhesives. This product has a molar mass of 136.15 and a density of 1.396 g/cm3. Its melting point is defined at 260.5°C and its boiling point is at 276°C. 收起 | |
| Phthalic Anhydride (PA) | Penpet Petrochemical Trading GmbH | Phthalic Anhydride (PA) in the form of a colourless flake, is an organic compound that can be used in surface coatings. This product is an important raw material that can often serve as a plasticizer in plastics, dyestuffs, and synthetic resins. | |
| Sodium Formate | Penpet Petrochemical Trading GmbH | Sodium Formate is the sodium salt of formic acid. This product appears as a colourless powder that can be used in printing processes. Its melting point is -94.7 degrees Celsius and it boils between 55.8 and 56.6 degrees C. | |
| Tetrahydrofurane (THF) | Penpet Petrochemical Trading GmbH | Tetrahydrofurane (THF), in the form of a colourless fluid with an ether-like odor, is an organic solvent that can be used in the production of enamels and adhesives. This product is normally an intermediate in the production of polyamide, polyester and p...展开 Tetrahydrofurane (THF), in the form of a colourless fluid with an ether-like odor, is an organic solvent that can be used in the production of enamels and adhesives. This product is normally an intermediate in the production of polyamide, polyester and polyurethane. 收起 | |
| Tetrahydrophthalic Anhydride (THPA) | Penpet Petrochemical Trading GmbH | Tetrahydrophthalic Anhydride (THPA), in the form of a white crystalline powder, is created from the reaction of butadiene with maleic anhydride. This product can be used in adhesives and as an intermediate for alkyd resins. | |
| Toluene-Diisocyanate (TDI) | Penpet Petrochemical Trading GmbH | Toluene-Diisocyanate (TDI) is a clear, colourless to yellowish liquid or solid, depending on the ambient temperature. This product is an aromatic diisocyanate that can be used in varnishes and adhesives. It is an important intermediate in the plastics i...展开 Toluene-Diisocyanate (TDI) is a clear, colourless to yellowish liquid or solid, depending on the ambient temperature. This product is an aromatic diisocyanate that can be used in varnishes and adhesives. It is an important intermediate in the plastics industry that is normally used in high-end lacquers and coatings. 收起 | |
| Trimellitic Anhydride (TMA) | Penpet Petrochemical Trading GmbH | Trimellitic Anhydride (TMA), in the form of a white crystalline flake, is a dicarboxylic acid produced from the oxidation of 1,2,4-Trimethylbenzene that can be used in the manufacture of wire enamels. This product is normally used for the production of P...展开 Trimellitic Anhydride (TMA), in the form of a white crystalline flake, is a dicarboxylic acid produced from the oxidation of 1,2,4-Trimethylbenzene that can be used in the manufacture of wire enamels. This product is normally used for the production of PVC plasticizers, polyester and polyamide resins, polyurethane resin, and as a curing agent for epoxies. 收起 | |
| Trimethylolpropane (TMP) | Penpet Petrochemical Trading GmbH | Trimethylolpropane (TMP), in the form of a clear crystalline flake, is an alcohol produced by the reaction of formaldehyde with n-butyraldehyde. This product is an intermediate and a triol that can be used in glues and polyurethane coatings. It is also ...展开 Trimethylolpropane (TMP), in the form of a clear crystalline flake, is an alcohol produced by the reaction of formaldehyde with n-butyraldehyde. This product is an intermediate and a triol that can be used in glues and polyurethane coatings. It is also known as hexaglycerol. 收起 | |
| Trimethylolpropane (TMP), Liquid | Penpet Petrochemical Trading GmbH | Trimethylolpropane (TMP), in the form of a clear colorless liquid, is an alcohol produced by the reaction of formaldehyde with n-butyraldehyde. This product is an intermediate and a triol that can be used in glues and polyurethane coatings. It is also k...展开 Trimethylolpropane (TMP), in the form of a clear colorless liquid, is an alcohol produced by the reaction of formaldehyde with n-butyraldehyde. This product is an intermediate and a triol that can be used in glues and polyurethane coatings. It is also known as hexaglycerol. 收起 | |
| Triphenylphosphite (TPP) | Penpet Petrochemical Trading GmbH | Triphenylphosphite (TPP), in the form of a colourless liquid or solid (depending on ambient temperature) is the ester of phosphorous acid and phenol. This product is normally an antioxidant, but it can be used in lubricant additives and adhesives. | |
| Winlex4101 Pentaerythritol Rosin Ester | Finjet Chemical Industries, Ltd. | Winlex4101 Pentaerythritol Rosin Ester is a light-colored pentaerythritol rosin ester that has been stabilized to provide excellent heat and aging stability. This product is applied in hot melt adhesives, sealants, and coatings. | |
| Winlex4105 Glycerol Rosin Ester | Finjet Chemical Industries, Ltd. | Winlex4105 Glycerol Rosin Ester is a glycerol ester of partially dimerized rosin that has a high softening point and good adhesion. This product is applied in hot melt adhesives, water-based adhesives, and coating applications. | |
| Winlex4110 Rosin Ester | Finjet Chemical Industries, Ltd. | Winlex4110 Rosin Ester is a glycerol rosin ester that has good heat stability and excellent polymer compatibility. This product is applied in hot melt adhesives and solvent-borne acrylic adhesives. | |
| Winlex4125 Polymerized Rosin Ester | Finjet Chemical Industries, Ltd. | Winlex4105 Polymerized Rosin Ester is a pentaerythritol ester of partially dimerized rosin that has a high softening point and good adhesion. This product is often used as a tackifier in hot melt adhesives, and can also be applied in water-based adhesives...展开 Winlex4105 Polymerized Rosin Ester is a pentaerythritol ester of partially dimerized rosin that has a high softening point and good adhesion. This product is often used as a tackifier in hot melt adhesives, and can also be applied in water-based adhesives, and coating applications. 收起 | |
| Winlex4270 Liquid Rosin Ester | Finjet Chemical Industries, Ltd. | Winlex4270 Liquid Rosin Ester is a low odor, liquid rosin ester that is designed for applications requiring high tack and low odor. This product is applied in adhesives as a tackifier and in hot melt adhesives as a plasticizer. |
