| Acetine 51035 | Rhein Chemie Rheinau GmbH | Acetine 51035 is glycerol triacetate appearing as a clear liquid. This acetate ester functions as a solvent and plasticizer in inks and printing inks. | |
| Adimoll® BO | Rhein Chemie Rheinau GmbH | Adimoll® BO is a benzyl octyl adipate (BOA) suitable for polymers. Appearing as a clear liquid, this low-temperature-resistant plasticizer provides light stability and high elasticity, finding application in coatings and adhesives. | |
| ANTIGEL® | Bernd Schwegmann GmbH & Co. KG | Antigel®主要用于基于醇酸、醇酸/三聚氰胺、硝化纤维化合物和聚酯的含溶剂体系。Antigel®应用于基于醇酸或醇酸/丙烯酸的水稀释体系中，也具有上述性能 | |
| ANTIGEL® HS | Bernd Schwegmann GmbH & Co. KG | 具有良好润湿性和分散性的粘度稳定剂，尤其适合高固体份涂料体系，不含酮肟和芳香族化合物，可生物降解 | |
| ANTIGEL® KF | Bernd Schwegmann GmbH & Co. KG | ANTIGEL® KF是一种多功能助剂，适合溶剂型和水性涂料体系。它不含酮肟和芳香族化合物，可生物降解。ANTIGEL® KF-D的多功能性源于各组分的协同增效作用。其稳定作用基于抗氧化剂的氧结合特性。ANTIGEL® KF-D改善了流平性和全干性。ANTIGEL® KF-D降低常用亲水颜料和憎水基料之间的界面张力。颜料颗粒分布均匀，因而色度深。可减少分散时间、絮凝和沉降现象，提升光泽度。大大避免了沉降发生。由于它具有出色的润湿性，可获得最佳的颜色深度 | |
| ANTIGEL® KF-D | Bernd Schwegmann GmbH & Co. KG | Antigel® KF/KF-D可用于几乎所有常规水性和溶剂型油漆体系中 | |
| Antilux® 110 | Rhein Chemie Rheinau GmbH | Antilux® 110 is a blend of selected paraffins and micro-waxes with medium-broad molecular weight distribution appearing as light blue pastilles. This wax protects rubber articles against cracking caused by ozone and weathering influences. Antilux® 110 fin...展开 Antilux® 110 is a blend of selected paraffins and micro-waxes with medium-broad molecular weight distribution appearing as light blue pastilles. This wax protects rubber articles against cracking caused by ozone and weathering influences. Antilux® 110 finds application in molded and extruded technical rubber articles, and micro cellular rubber and cable coverings used at medium-high service temperatures. 收起 | |
| Antilux® 500 | Rhein Chemie Rheinau GmbH | Antilux® 500 is a blend of selected paraffins and micro-waxes with medium-broad molecular weight distribution appearing as white to yellowish flakes. This wax protects rubber articles against cracking caused by ozone and weathering influences. Antilux® 50...展开 Antilux® 500 is a blend of selected paraffins and micro-waxes with medium-broad molecular weight distribution appearing as white to yellowish flakes. This wax protects rubber articles against cracking caused by ozone and weathering influences. Antilux® 500 finds application in molded and extruded technical rubber articles, microcellular rubber, cable jackets used at moderate temperatures. 收起 | |
| Antilux® 500 PE | Rhein Chemie Rheinau GmbH | Antilux® 500 PE is a blend of selected paraffins and micro-waxes with medium-broad molecular weight distribution with 2% low molecular polyethylene. Appearing as white to yellowish pastilles, this wax protects rubber articles against cracking caused by oz...展开 Antilux® 500 PE is a blend of selected paraffins and micro-waxes with medium-broad molecular weight distribution with 2% low molecular polyethylene. Appearing as white to yellowish pastilles, this wax protects rubber articles against cracking caused by ozone and weathering influences. Antilux® 500 PE finds application in technical molded and extruded articles, microcellular rubber, and cable coverings used at moderate temperatures. 收起 | |
| Antilux® 550 | Rhein Chemie Rheinau GmbH | Antilux® 550 is a blend of selected paraffins and micro-waxes with narrow molecular weight distribution appearing as light yellow pastilles. This wax protects rubber articles against cracking caused by ozone and weathering influences. Antilux® 550 finds a...展开 Antilux® 550 is a blend of selected paraffins and micro-waxes with narrow molecular weight distribution appearing as light yellow pastilles. This wax protects rubber articles against cracking caused by ozone and weathering influences. Antilux® 550 finds application in technical molded and extruded articles, profiles, and in microcellular rubber and cable coverings used at moderate temperatures. 收起 | |
| Antilux® 600 | Rhein Chemie Rheinau GmbH | Antilux® 600 is a blend of selected paraffins and micro-waxes with narrow molecular weight distribution appearing as light yellow pastilles. This wax protects rubber articles against cracking caused by ozone and weathering influences. Antilux® 600 finds a...展开 Antilux® 600 is a blend of selected paraffins and micro-waxes with narrow molecular weight distribution appearing as light yellow pastilles. This wax protects rubber articles against cracking caused by ozone and weathering influences. Antilux® 600 finds application in technical molded and extruded articles, and in microcellular rubber and cable coverings used at medium-high service temperatures. 收起 | |
| Antilux® 654 | Rhein Chemie Rheinau GmbH | Antilux® 654 is a blend of selected paraffins and micro-waxes with medium-broad molecular weight distribution appearing as white to yellowish pastilles. This wax protects rubber articles against cracking caused by ozone and weathering influences. Antilux®...展开 Antilux® 654 is a blend of selected paraffins and micro-waxes with medium-broad molecular weight distribution appearing as white to yellowish pastilles. This wax protects rubber articles against cracking caused by ozone and weathering influences. Antilux® 654 finds application in technical molded and extruded articles, and in tires and technical rubber articles such as conveyor belts and cable coverings used at high service temperatures. 收起 | |
| Antilux® 654 A | Rhein Chemie Rheinau GmbH | Antilux® 654 A is a blend of selected paraffins and micro-waxes with medium-broad molecular weight distribution and 2% low molecular weight polyethylene. Appearing as white to yellowish pastilles, this wax protects rubber articles against cracking caused ...展开 Antilux® 654 A is a blend of selected paraffins and micro-waxes with medium-broad molecular weight distribution and 2% low molecular weight polyethylene. Appearing as white to yellowish pastilles, this wax protects rubber articles against cracking caused by ozone and weathering influences. Antilux® 654 A finds application in technical molded and extruded articles, and in tires, conveyor belts, and cable coverings used at high service temperatures. 收起 | |
| Baymod® PU-A | Rhein Chemie Rheinau GmbH | Baymod® PU-MOD is an aliphatic polyester urethane appearing as a granule. This plasticizing polymer improves the resistance of PVC and POM to oil, grease, solvent, and abrasion. Baymod® PU-A functions as a laminating calendar coating for conveyor belts, f...展开 Baymod® PU-MOD is an aliphatic polyester urethane appearing as a granule. This plasticizing polymer improves the resistance of PVC and POM to oil, grease, solvent, and abrasion. Baymod® PU-A functions as a laminating calendar coating for conveyor belts, folding containers, clothing, upholstery, and bags and shoes. 收起 | |
| Baymod® PU-MOD | Rhein Chemie Rheinau GmbH | Baymod® PU-MOD is an aliphatic polyester urethane with a low content of PVC as a dusting agent. Appearing as a white powder, this plasticizing polymer functions as a laminating calendar coating for conveyor belts, folding containers, clothing, upholstery,...展开 Baymod® PU-MOD is an aliphatic polyester urethane with a low content of PVC as a dusting agent. Appearing as a white powder, this plasticizing polymer functions as a laminating calendar coating for conveyor belts, folding containers, clothing, upholstery, and bags and shoes. 收起 | |
| BLISTER FREE 3 | Bernd Schwegmann GmbH & Co. KG | Blister Free 3可用于含溶剂和水稀释体系。在含溶剂体系中，Blister Free 3作为消泡剂尤为有效，也可部分作为流平剂。它适用于以下基料：醇酸、醇酸/聚酯-、不饱和聚酯-、NC-、AC-、PU和丙烯酸体系。Blister Free 3在水稀释涂料体系中也非常有效，尤其是基于醇酸/丙烯酸、饱和聚酯和环氧体系 | |
| BLISTER FREE 45 | Bernd Schwegmann GmbH & Co. KG | Blister Free 45在以下溶剂型体系中具有良好的消泡效果，基于硝基纤维素、酸催化、通用聚氨酯。Blister Free 45对于水稀释涂料也具有非常好的消泡效果，基于以下基料：聚酯、酸性树脂、丙烯酸 | |
| BLISTER FREE 54 | Bernd Schwegmann GmbH & Co. KG | Blister Free 54可有效应用于几乎所有含溶剂单或多组分油漆和涂料体系，包括自干和烘烤醇酸、环氧体系、PU体系、丙烯酸，特殊的应用领域是印刷油墨和卷材涂料体系 | |
| BLISTER FREE 55 | Bernd Schwegmann GmbH & Co. KG | Blister Free 55在各种水性醇酸体系中具有出色的消泡效果，例如那些中和后变水溶性，以及在醇酸乳液中，含或不含助溶剂的。在很多改性醇酸和醇酸/丙烯酸混合体系中也具有非常好的消泡效果 | |
| BLISTER FREE 56 | Bernd Schwegmann GmbH & Co. KG | Blister Free 56 可用于UV固化体系。它可用于下面提到的水稀释体系。Blister Free 56具有良好的消泡效果，它在这些体系：醇酸/丙烯酸油漆、饱和聚酯、环氧中有部分流平功能 | |
| BLISTER FREE 66 | Bernd Schwegmann GmbH & Co. KG | Blister Free 66可作为消泡剂应用于所有常规涂料体系中。Blister Free 66 在基于聚酯、聚氨酯和丙烯酸酯的体系中尤为有效 | |
| BLISTER FREE 75 | Bernd Schwegmann GmbH & Co. KG | Blister Free 75在常规NC体系和NC混合体系、AC和环氧体系、PU和自干丙烯酸体系中具有良好的消泡效果。Blister Free 75在基于以下基料：长油度醇酸、中油度醇酸、丙烯酸酯/中油度醇酸、丙烯酸酯/长油度醇酸、环氧的水稀释涂料体系中具有非常好的消泡效果 | |
| BLISTER FREE 77 | Bernd Schwegmann GmbH & Co. KG | 完全消泡是形成一个出色涂膜的必要条件。吸附的空气、针孔会导致灰尘粘附并造成喷涂面漆和抛光操作困难。除了导致这些表面缺陷，它也经常会降低光泽和耐水性。Blister Free 77可相当大程度上减少气泡形成，造成强烈消泡，并均一地形成不饱和聚酯蜡层 | |
| BLISTER FREE 88 | Bernd Schwegmann GmbH & Co. KG | Blister Free 88是一种表面活性添加剂，会影响表面张力。该性能可减少在油漆的生产或施工过程中气泡的形成。任何形成的气泡都可被快速摧毁。通常Blister Free 88对涂膜流平具有良好的效果 | |
| Bonding Agent 2005 | Rhein Chemie Rheinau GmbH | Bonding Agent 2005 is a formulation of an aromatic polyisocyanurate in n-butyl acetate appearing as a viscous, light yellow liquid. It is a high performance, reactive and phthalate-free one-component bonding agent. Bonding Agent 2005 is used to improve t...展开 Bonding Agent 2005 is a formulation of an aromatic polyisocyanurate in n-butyl acetate appearing as a viscous, light yellow liquid. It is a high performance, reactive and phthalate-free one-component bonding agent. Bonding Agent 2005 is used to improve the adhesion of PVC plastisol coatings to substrates made of polyester of polymaide. 收起 | |
| Bonding Agent 51030 | Rhein Chemie Rheinau GmbH | Bonding Agent 51030 is a solvent-free one-component bonding agent that appears as a yellow viscous liquid. Bonding Agent 51030 is used to improve the adhesion of PVC plastisol coatings to substrates made of polyester or polyamide. | |
| Bonding Agent 51030 N | Rhein Chemie Rheinau GmbH | Bonding Agent 51030 N is a preparation of a polyisocyanurate in di-iso-nonyl phthalate (DINP) that appears as a yellow viscous liquid. Bonding Agent 51030 N functions as a solvent-free one-component bonding agent and is used to improve the adhesion of PVC...展开 Bonding Agent 51030 N is a preparation of a polyisocyanurate in di-iso-nonyl phthalate (DINP) that appears as a yellow viscous liquid. Bonding Agent 51030 N functions as a solvent-free one-component bonding agent and is used to improve the adhesion of PVC plastisol coatings to substrates made of polyester or polyamide. 收起 | |
| Bonding Agent 51066 | Rhein Chemie Rheinau GmbH | Bonding Agent 51066 is a phthalate- and solvent-free one-component bonding agent that appears as a yellow viscous liquid. Bonding Agent 51066 is used to improve the adhesion of PVC plastisol coatings to substrates made of polyester or polyamide. | |
| Bonding Agent 51066 N | Rhein Chemie Rheinau GmbH | Bonding Agent 51066 N is a preparation of a polyisocyanurate in alkylsulphonic acid ester of phenols and polyiso-cyanurate appearing as a yellow liquid. Bonding Agent 51066 N is phthalate- and solvent-free one-component bonding agent used to improve the a...展开 Bonding Agent 51066 N is a preparation of a polyisocyanurate in alkylsulphonic acid ester of phenols and polyiso-cyanurate appearing as a yellow liquid. Bonding Agent 51066 N is phthalate- and solvent-free one-component bonding agent used to improve the adhesion of PVC plastisol coatings to substrates made of polyester or polyamide. 收起 | |
| Bonding Agent 51099 | Rhein Chemie Rheinau GmbH | Bonding Agent 51099 is a formulation of a polyisocyanurate in isononylbenzoate (INB) that appeats as a slightly yellow to yellow viscous liquid. Bonding Agent 51099 is a high performance, reactive, phthalate- and solvent-free one-component bonding agent u...展开 Bonding Agent 51099 is a formulation of a polyisocyanurate in isononylbenzoate (INB) that appeats as a slightly yellow to yellow viscous liquid. Bonding Agent 51099 is a high performance, reactive, phthalate- and solvent-free one-component bonding agent used to improve the adhesion of PVC plastisol coatings to substrates made of polyester or polyamide. 收起 | |
| Disflamoll® TP | Rhein Chemie Rheinau GmbH | Disflamoll® TP is triphenyl phosphate (TPP) appearing as a white pellet. This low volatility flame retardant is commonly used in polymers and finds application in coatings based on nitrocellulose, phenolic resins, and ABS/PC and PPE/HIPS compounds. | |
| Disflamoll® TP Liquid | Rhein Chemie Rheinau GmbH | Disflamoll® TP is triphenyl phosphate (TPP) appearing as a liquid. This low volatility flame retardant is commonly used in polymers and finds application in coatings based on nitrocellulose, phenolic resins, and ABS/PC and PPE/HIPS compounds. | |
| KLX 7997 | Nokxeller Quimica Ltda | KLX 7997 is a versatile polyether based aromatic isocyanate anionic dispersion for high tack formulations. It has a very soft and flexible film that can be used as a high initial and final bond strength and heat resistance. Typical applications are for mo...展开 KLX 7997 is a versatile polyether based aromatic isocyanate anionic dispersion for high tack formulations. It has a very soft and flexible film that can be used as a high initial and final bond strength and heat resistance. Typical applications are for modifying pressure sensitive textile & construction adhesives, neoprene, EVA and other plastic & leather primer applications. Once crosslinked shows outstanding water resistance. 收起 | |
| KORRODUR | Bernd Schwegmann GmbH & Co. KG | Korrodur主要作为一种锈转化助剂应用于常规醇酸树脂涂料中。然而，Korrodur在基于环氧、氯化橡胶或丙烯酸基料的含溶剂油漆中也有良好效果。典型应用：防锈底漆、单层防腐蚀体系、修补面漆 | |
| KORRODUR AL 2 | Bernd Schwegmann GmbH & Co. KG | Korrodur AL 2用于底漆中消除差的基材和差强人意的喷涂条件的影响。Korrodur AL 2可将残留的锈转换成非腐蚀性丹宁酸铁，并提供长期腐蚀保护。如果存在湿气，它会在喷涂过程中乳化进入膜中，干燥时会蒸发。润湿剂可确保对残留锈颗粒、灰尘的良好渗透以及对除油很差的表面的润湿 | |
| LA THIX FB | Bernd Schwegmann GmbH & Co. KG | 可增稠所有常规带极性基团基料的含溶剂体系。尤其适用于高膜厚体系、纹理烤漆、墙面和DIY油漆。主要优势为：液态，因此易添加、耐温、对光泽无负面影响、可防止沉降和流挂 | |
| Mesamoll® | Rhein Chemie Rheinau GmbH | Mesamoll® is an alkylsulphonic acid ester with phenol (ASE) appearing as a slightly yellow, clear liquid. This phthalate-free general purpose plasticizer provides gelling behaviour and saponification and weather resistance. Mesamoll® finds application in ...展开 Mesamoll® is an alkylsulphonic acid ester with phenol (ASE) appearing as a slightly yellow, clear liquid. This phthalate-free general purpose plasticizer provides gelling behaviour and saponification and weather resistance. Mesamoll® finds application in one- and two-component polyurethane-based sealing and adhesive systems, in mouldable, easy-to-process sealants for filling or covering joints in structures and parts of buildings, and in coatings for air-supported structures and tents, occupational and protective clothing, rain-wear, bath mats, expanded film, floorcovering, wall paper, and imitation leather. 收起 | |
| Mesamoll® II | Rhein Chemie Rheinau GmbH | Mesamoll® I is an alkylsulphonic acid ester with phenol (ASE) appearing as a slightly yellow, clear liquid. This phthalate-free general purpose plasticizer provides gelling behaviour and saponification and weather resistance. Mesamoll® I finds applicatio...展开 Mesamoll® I is an alkylsulphonic acid ester with phenol (ASE) appearing as a slightly yellow, clear liquid. This phthalate-free general purpose plasticizer provides gelling behaviour and saponification and weather resistance. Mesamoll® I finds application in one- and two-component polyurethane-based sealing and adhesive systems, in mouldable, easy-to-process sealants for filling or covering joints in structures and parts of buildings, and in coatings for air-supported structures and tents, occupational and protective clothing, rain-wear, bath mats, expanded film, floorcovering, wall paper, and imitation leather. 收起 | |
| MITTEL S | Bernd Schwegmann GmbH & Co. KG | Mittel S适用于几乎所有非水性体系，可高效应用于醇酸（自干）、醇酸/聚酯（热固化）、氯化橡胶、环氧、聚氨酯、热塑性丙烯酸和反应性丙烯酸体系 | |
| NKX 144 | Nokxeller Quimica Ltda | NKX 144 is a small particle size high gloss PU polyesther aliphatic topcoat. It forms a transparent film of medium hardness suitable as a final varnish or topcoat where high gloss, abrasion resistance and clarity are required. When crosslinked, presents e...展开 NKX 144 is a small particle size high gloss PU polyesther aliphatic topcoat. It forms a transparent film of medium hardness suitable as a final varnish or topcoat where high gloss, abrasion resistance and clarity are required. When crosslinked, presents excellent weatherability. It is ideal for use as a topcoat for leather finish and PVC, indoor paints formulation, etc. 收起 | |
| NKX 176 | Nokxeller Quimica Ltda | NKX 176 is a soft and elastic PUD with outstanding film-forming properties. NKX 176 is a NON IONIC VOC free soft non tacky and elastic PUD with outstanding film-forming properties. It can be used as a universal coating resin for textile due to its varied ...展开 NKX 176 is a soft and elastic PUD with outstanding film-forming properties. NKX 176 is a NON IONIC VOC free soft non tacky and elastic PUD with outstanding film-forming properties. It can be used as a universal coating resin for textile due to its varied possibility of uses. NKX 176 has a flexible and soft but non-tacky handle. It has varied applications especially in textile finishes where body handle, durability are required. It is ideal for use as a print binder and as an universal coating resin in textile applications, garment leather finish, and coatings for digital printing in fabrics. 收起 | |
| NKX 183 | Nokxeller Quimica Ltda | NKX 180 based resin, with higher concentration.Multipurpose resin of extreme adhesion, outstanding toughness and abrasion resistance suitable for coatings for the following substrates: plastic, synthetic fabric, metal, shoe finish, etc. Due to its high cr...展开 NKX 180 based resin, with higher concentration.Multipurpose resin of extreme adhesion, outstanding toughness and abrasion resistance suitable for coatings for the following substrates: plastic, synthetic fabric, metal, shoe finish, etc. Due to its high crystalline segment concentration the polymer presents itself tough, yet flexible and resistant. 收起 | |
| NKX 201 NMP-Free | Nokxeller Quimica Ltda | NKX 201 NMP-Free shows excellent chemical, weathering and abrasion resistance due to higher resistance of this kind of polyol. NKX 201 presents wide use possibilities considering its high gloss and transparency properties as in synthetic substrates, as hi...展开 NKX 201 NMP-Free shows excellent chemical, weathering and abrasion resistance due to higher resistance of this kind of polyol. NKX 201 presents wide use possibilities considering its high gloss and transparency properties as in synthetic substrates, as high gloss topcoats in leather finish, wood flooring or print screen putties, metallic applications. 收起 | |
| NKX 240 | Nokxeller Quimica Ltda | NKX 240 is a multipurpose resin of exceptional properties was developed to serve a wide range of applications for flexible and rigid substrates. NKX 240 shows up a clear film with good gloss retention and presents high adhesion and heat resistance. | |
| NKX 245 | Nokxeller Quimica Ltda | NKX-245 is a modified polyester type suitable for glossy aqueous coatings as wood flooring. NKX 245 has a very hard film providing high abrasion resistance, and adhesion and can be easily formulated along with other components such as acrylic resins, pigm...展开 NKX-245 is a modified polyester type suitable for glossy aqueous coatings as wood flooring. NKX 245 has a very hard film providing high abrasion resistance, and adhesion and can be easily formulated along with other components such as acrylic resins, pigment dispersions, fillers, thickeners, etc. 收起 | |
| NKX 250 | Nokxeller Quimica Ltda | NKX-250 is a very hard PUD polyester type adequate for clear or pigmented waterbased topcoat for rigid substrates specially furniture, metal or hard synthetic substrates. Its hard, transparent and glossy film provides good abrasion resistance, adhesion an...展开 NKX-250 is a very hard PUD polyester type adequate for clear or pigmented waterbased topcoat for rigid substrates specially furniture, metal or hard synthetic substrates. Its hard, transparent and glossy film provides good abrasion resistance, adhesion and gloss. 收起 | |
| NKX 274 | Nokxeller Quimica Ltda | NKX 274 is a high solid small particle size resin with excellent chemical resistance. It is adequate for varied market segments wherever is necessary to replace a solventborne for a waterborne paint. Typical uses in metal, soles, PVC, other synthetic subs...展开 NKX 274 is a high solid small particle size resin with excellent chemical resistance. It is adequate for varied market segments wherever is necessary to replace a solventborne for a waterborne paint. Typical uses in metal, soles, PVC, other synthetic substrate paint compositions wherever high gloss, good adhesions and chemical resistance are necessary. 收起 | |
| NKX 279 | Nokxeller Quimica Ltda | NKX 279 is a fine particle size resin and developed to formulate water topcoats of high adhesion and very good chemical resistance. Typical end use applications include top coatings for rigid and flexible substrates including wood, paper, metallic surface...展开 NKX 279 is a fine particle size resin and developed to formulate water topcoats of high adhesion and very good chemical resistance. Typical end use applications include top coatings for rigid and flexible substrates including wood, paper, metallic surface , plastics and especially PVC and other synthetic laminates.NKX 279 is high performance water based coating and can replace traditional solvent based coatings in wide applications possibilities. 收起 | |
| NO SED | Bernd Schwegmann GmbH & Co. KG | 防沉降助剂，适合溶剂型涂料 | |
| Rhenogran® DOTG-70 | Rhein Chemie Rheinau GmbH | Rhenogran® DOTG-70 is 70 % N,N'-di-o-tolyl guanidine and 30% elastomer binder with dispersing agents appearing as white to grey, slightly red granules thermoplastic, fully compatible polymer binder allows quick absorption and excellent dispersion in the r...展开 Rhenogran® DOTG-70 is 70 % N,N'-di-o-tolyl guanidine and 30% elastomer binder with dispersing agents appearing as white to grey, slightly red granules thermoplastic, fully compatible polymer binder allows quick absorption and excellent dispersion in the rubber. In this way, optimal activity of the effective substance is assured. This accelerator is used for the vulcanization of natural and synthetic rubbers requiring mechanical properties and aging resistance. Rhenogran® DOTG-70 finds application in roller coverings and cable sheathing. 收起 | |
| Rhenogran® Fe-Red-70 | Rhein Chemie Rheinau GmbH | Rhenogran® Fe-Red-70 is 70 % iron (III) oxide and 30 % elastomer binder with dispersing agents appearing as red granules. This iron oxide pigment is used for coloring compounds based on natural and synthetic rubbers. Rhenogran® Fe-Red-70 finds application...展开 Rhenogran® Fe-Red-70 is 70 % iron (III) oxide and 30 % elastomer binder with dispersing agents appearing as red granules. This iron oxide pigment is used for coloring compounds based on natural and synthetic rubbers. Rhenogran® Fe-Red-70 finds application in technical rubber articles including floor coverings. 收起 | |
| Rhenogran® HEXA-80 | Rhein Chemie Rheinau GmbH | Rhenogran® HEXA-80 is 80 % hexamethylene tetramine and 20 % elastomer binder and dispersing agents appearing as beige granules. This accelerator is used for the vulcanization of natural and synthetic rubbers, and also functions as a formaldehyde donor. Rh...展开 Rhenogran® HEXA-80 is 80 % hexamethylene tetramine and 20 % elastomer binder and dispersing agents appearing as beige granules. This accelerator is used for the vulcanization of natural and synthetic rubbers, and also functions as a formaldehyde donor. Rhenogran® HEXA-80 finds application as a formaldehyde donor in resorcinol-based adhesive compounds such as carcasses of steel-cord tires, in slow-curing mixes, thick-walled articles, roller coverings, and light-colored and transparent vulcanizates. 收起 | |
| Rhenogran® HEXA-80 SBR | Rhein Chemie Rheinau GmbH | Rhenogran® HEXA-80 SBR is 80% hexamethylene tetramine and 20% elastomer binder (SBR) and dispersing agents appearing as beige granules. This accelerator is used for the vulcanization of natural and synthetic rubbers, and also functions as a formaldehyde d...展开 Rhenogran® HEXA-80 SBR is 80% hexamethylene tetramine and 20% elastomer binder (SBR) and dispersing agents appearing as beige granules. This accelerator is used for the vulcanization of natural and synthetic rubbers, and also functions as a formaldehyde donor. Rhenogran® HEXA-80 SBR finds application as a formaldehyde donor in resorcinol-based adhesive compounds such as carcasses of steel-cord tires, in slow-curing mixes, thick-walled articles, roller coverings, and light-colored and transparent vulcanizates. 收起 | |
| Rhenogran® MgO-75 | Rhein Chemie Rheinau GmbH | Rhenogran® MgO-75 is 75 % magnesium oxide and 25 % polymer binder and dispersing agents appearing as grey to white granules. This curing activator and acid acceptor finds application in polychloroprene rubber (CR) and adhesives. | |
| Rhenogran® MPTD-70 | Rhein Chemie Rheinau GmbH | Rhenogran® MPTD-70 is 70% N,N'-dimethyl-N,N'-diphenyl thiuramdisulphide and 30% elastomer binder and dispersing agents appearing as beige granules. This accelerator is used for the vulcanization of natural and synthetic rubbers and as curing agents for su...展开 Rhenogran® MPTD-70 is 70% N,N'-dimethyl-N,N'-diphenyl thiuramdisulphide and 30% elastomer binder and dispersing agents appearing as beige granules. This accelerator is used for the vulcanization of natural and synthetic rubbers and as curing agents for sulfurless and low sulfur vulcanizations requiring heat and aging resistance. Rhenogran® MPTD-70 finds application in heat resistant technical articles and cable coverings. 收起 | |
| Rhenogran® MTT-80 | Rhein Chemie Rheinau GmbH | Rhenogran® MTT-80 is 80% 3-methyl-thiazolidine-thione-2 and 20% elastomer binder and dispersing agents appearing as grey-beige granules. This vulcaniztion accelerator is used in chloroprene rubber requiring moduli and aging resistance. Rhenogran® MTT-80 f...展开 Rhenogran® MTT-80 is 80% 3-methyl-thiazolidine-thione-2 and 20% elastomer binder and dispersing agents appearing as grey-beige granules. This vulcaniztion accelerator is used in chloroprene rubber requiring moduli and aging resistance. Rhenogran® MTT-80 finds application in technical molded and extruded goods, profiles, hoses, seals, mills, cable sheathing, and conveyor belts based on CR. 收起 | |
| Rhenogran® PCD-50 EVA | Rhein Chemie Rheinau GmbH | Rhenogran® PCD-50 EVA is 50% polycarbodiimide and 50% elastomer binder (EVA) and dispersing agents appearing as white to off-white granules. This antioxidant is effective against hydrolysis for polymers containing ester groups such as ethylene vinylacetat...展开 Rhenogran® PCD-50 EVA is 50% polycarbodiimide and 50% elastomer binder (EVA) and dispersing agents appearing as white to off-white granules. This antioxidant is effective against hydrolysis for polymers containing ester groups such as ethylene vinylacetate copolymers. Rhenogran® PCD-50 EVA finds application in molded and extruded articles, cable sheathings and insulations, and fabric proofings. 收起 | |
| Rhenogran® Resorcin-80 | Rhein Chemie Rheinau GmbH | Rhenogran® Resorcin-80 is 80% resorcinol and 20% EPDM/EVA binder and dispersing agents appearing as off-white to brown granules. This direct bonding compound is used for the bonding system resorcinol formaldehyde silica and is suitable for bonding rubber ...展开 Rhenogran® Resorcin-80 is 80% resorcinol and 20% EPDM/EVA binder and dispersing agents appearing as off-white to brown granules. This direct bonding compound is used for the bonding system resorcinol formaldehyde silica and is suitable for bonding rubber to reinforcing materials such as fabrics, glass fibres, and steel cord. Rhenogran® Resorcin-80 finds application in tires and technical rubber goods such as conveyor belts, raw-edge V-belts, round belts, fire hose, other reinforced hoses, flexible containers, and fabric proofings. 收起 | |
| Rhenogran® Resorcin-80 SBR | Rhein Chemie Rheinau GmbH | Rhenogran® Resorcin-80 SBR is 80% resorcinol and 20% SBR binder and dispersing agents appearing as off-white to brown granules. This direct bonding compound is used for the bonding system resorcinol formaldehyde silica and is suitable for bonding rubber t...展开 Rhenogran® Resorcin-80 SBR is 80% resorcinol and 20% SBR binder and dispersing agents appearing as off-white to brown granules. This direct bonding compound is used for the bonding system resorcinol formaldehyde silica and is suitable for bonding rubber to reinforcing materials such as fabrics, glass fibres, and steel cord. Rhenogran® Resorcin-80 SBR finds application in tires and technical rubber goods such as conveyor belts, raw-edge V-belts, round belts, fire hose, other reinforced hoses, flexible containers, and fabric proofings. 收起 | |
| Rhenogran® TBzTD-70 | Rhein Chemie Rheinau GmbH | Rhenogran® TBzTD-70 is 70 % tetrabenzylthiuram disulfide (TBzTD) and 30 % elastomer binder and dispersing agents appearing as beige granules. This accelerator is used in natural and synthetic rubber vulcanization, and as a vulcanizing agent for sulfurless...展开 Rhenogran® TBzTD-70 is 70 % tetrabenzylthiuram disulfide (TBzTD) and 30 % elastomer binder and dispersing agents appearing as beige granules. This accelerator is used in natural and synthetic rubber vulcanization, and as a vulcanizing agent for sulfurless or low sulfur vulcanizations requiring heat and aging resistance. Rhenogran® TBzTD-70 finds application in technical and heat resistant rubber articles such as cable sheathing and insulation. 收起 | |
| Rhenogran® TMTD-70 | Rhein Chemie Rheinau GmbH | Rhenogran® TMTD-70 is 70 % tetramethylthiuram disulfide and 30 % elastomer binder with dispersing agents appearing as orange granules. This accelerator is used for the vulcanization of natural and synthetic rubbers, and as a curing agent for sulfurless or...展开 Rhenogran® TMTD-70 is 70 % tetramethylthiuram disulfide and 30 % elastomer binder with dispersing agents appearing as orange granules. This accelerator is used for the vulcanization of natural and synthetic rubbers, and as a curing agent for sulfurless or low sulfur vulcanizations requiring heat and aging resistance. Rhenogran® TMTD-70 finds application in heat resistant mechanical rubber articles, and cable coverings and insulations. 收起 | |
| SCHWEGO ® Pur 8051 | Bernd Schwegmann GmbH & Co. KG | Schwego® Pur 8051是一种非离子型增稠剂，能有效改善水性涂料和清漆的流变性能。同时，Schwego®Pur 8051也可以与其它增稠剂配合使用而达到某种特别的效果。这种特别效果也取决于基料的种类。 | |
| SCHWEGO® Antimec | Bernd Schwegmann GmbH & Co. KG | Schwego® Antimec可用于几乎所有常规油漆体系，水性和溶剂型。而防结皮效果只对长油度醇酸树脂体系有效 | |
| SCHWEGO® corrit | Bernd Schwegmann GmbH & Co. KG | Schwego® Corrit主要作为一种锈转化助剂应用于水性油漆。典型应用：防锈底漆、单层防腐蚀体系、修补面漆 | |
| SCHWEGO® Everlast | Bernd Schwegmann GmbH & Co. KG | 基于螯合物的铁锈净化系统。轻微浆状的液体，可与中和的铁锈层形成金属有机离子复合物。该逐步形成的、黑色的、非常小巧的保护层可提供长期腐蚀耐久性，由于它含有成膜助剂，同时也是一个完美的底漆 | |
| SCHWEGO® Flow 8057 | Bernd Schwegmann GmbH & Co. KG | Schwego® Flow 8057可用于几乎所有水稀释涂料体系。不存在不相容性问题。 | |
| SCHWEGO® Flow 8058 | Bernd Schwegmann GmbH & Co. KG | Schwego® Flow 8058可用于几乎所有水稀释涂料体系。不存在不相容性问题。Schwego® Flow 8058仅含有水一种挥发性组分，使其特别适合用于无溶剂水稀释体系 | |
| SCHWEGO® Flow 8060 | Bernd Schwegmann GmbH & Co. KG | Schwego® Flow 8060可用于常规含溶剂或无溶剂涂料体系。一般来说，Schwego® Flow 8060对所有基料体系均有效，但它不适合用于水性涂料材料 | |
| SCHWEGO® Fluor 6523 | Bernd Schwegmann GmbH & Co. KG | 高效润湿助剂，用于溶剂型和水性涂料体系，可生物降解，不含PFOS和PFOA，基于C4技术 | |
| SCHWEGO® Fluor 6536 | Bernd Schwegmann GmbH & Co. KG | 高效润湿助剂，用于溶剂型和水性涂料体系，不含PFOS和PFOA，基于环保型C4、C6技术 | |
| SCHWEGO® Fluor 6543 | Bernd Schwegmann GmbH & Co. KG | 高效润湿助剂，用于溶剂型和水性涂料体系，不含PFOS和PFOA，基于环保型C4、C6技术 | |
| SCHWEGO® Foam 6303 | Bernd Schwegmann GmbH & Co. KG | Schwego® Foam 6303可用于含溶剂和水稀释体系。在含溶剂体系中，Schwego® Foam 6303作为消泡脱气剂尤为有效，也可部分作为流平剂。适合以下基料：醇酸、醇酸/聚酯、不饱和聚酯、NC-、AC-、PU和聚丙烯酸体系 | |
| SCHWEGO® Foam 6325 | Bernd Schwegmann GmbH & Co. KG | Schwego® Foam 6325是一种液体，是所有乳胶漆非常有效的消泡剂，尤其是对于基于苯乙烯/丁二烯乳胶和丙烯酸共聚物的乳胶漆。Schwego® Foam 6325在水中易乳化，不含硅 | |
| SCHWEGO® Foam 6343 | Bernd Schwegmann GmbH & Co. KG | 消泡剂，适合溶剂型涂料体系 | |
| SCHWEGO® Foam 6351 | Bernd Schwegmann GmbH & Co. KG | Schwego® Foam 6351可用于几乎所有无溶剂和含溶剂涂料体系。在锤纹罩面漆、建筑涂料、反应性厚涂膜体系、重着色涂料体系和配方中特别有效，适用于无气喷涂。Schwego® Foam 6351在水性工业漆（醇酸/三聚氰胺体系）中也有效果 | |
| SCHWEGO® Foam 6354 | Bernd Schwegmann GmbH & Co. KG | Schwego® Foam 6354对几乎所有含溶剂的单和多组分油漆和涂料体系都有效。它的主要组成为：自干和烘烤醇酸、环氧体系、PU体系和丙烯酸 | |
| SCHWEGO® Foam 6356 | Bernd Schwegmann GmbH & Co. KG | Schwego® Foam 6356是一种界面活性产品，可抑制空气附着，并在涂膜干燥前摧毁气泡。因而可阻止缩孔形成。涂膜弹性得以提高 | |
| SCHWEGO® Foam 6360 | Bernd Schwegmann GmbH & Co. KG | Schwego® Foam 6360是一种带界面活性的产品，可消除UV涂料中吸附空气的形成。也就是说，气泡在涂膜干燥前就被消除。可防止缩孔，促进流平 | |
| SCHWEGO® Foam 6361 | Bernd Schwegmann GmbH & Co. KG | Schwego® Foam 6361是一种带有界面活性的产品，可消除UV涂料中吸附空气的形成。也就是说，气泡在涂膜干燥前就被消除。可防止缩孔，促进流平 | |
| SCHWEGO® Foam 6375 | Bernd Schwegmann GmbH & Co. KG | Schwego® Foam 6375在常规NC体系和NC组合体系、 AC和环氧体系、PU和自干丙烯酸体系中具有良好的消泡作用。Schwego® Foam 6375在基于以下基料：长油度醇酸、中油度醇酸、丙烯酸酯/中油度醇酸、丙烯酸酯/长油度醇酸、环氧的水稀释涂料体系中具有良好到非常好的消泡效果 | |
| SCHWEGO® Foam 6377 | Bernd Schwegmann GmbH & Co. KG | 完全消泡是形成一个无缺陷涂膜的必要条件。吸附的空气、针孔会导致灰尘粘附并造成喷涂面漆和抛光操作困难。除了导致这些表面缺陷，它也经常会降低光泽和耐水性。Schwego® Foam 6377可相当大程度上减少气泡形成，造成强烈消泡，并均一地形成不饱和聚酯蜡层 | |
| SCHWEGO® Foam 6388 | Bernd Schwegmann GmbH & Co. KG | Schwego® Foam 6388是一种界面活性添加剂，可影响表面张力。该特性可最大程度减少油漆生产或施工过程中气泡的形成。所有形成的气泡都可被快速消除。一般来说，Schwego® Foam 6388有助于漆膜的流平 | |
| SCHWEGO® foam 6390 | Bernd Schwegmann GmbH & Co. KG | SCHWEGO® foam 6390是一种用于水性涂料系统的消泡剂。它在水性介质的防范，控制和去除泡沫方面效率很高，因此可以在几乎所有水基油漆和涂料中使用。这款产品适用于需要高纯度水平的工业应用中，也在食品行业中有多种应用。 | |
| SCHWEGO® Foam 8013 | Bernd Schwegmann GmbH & Co. KG | Schwego® Foam 8013是一种液体、高效消泡剂，适用于所有水性体系和胶粘剂，特别是基于聚氨酯和丙烯酸酯的水性体系和胶粘剂。 Schwego® Foam 8013易乳化，不含硅 | |
| SCHWEGO® Foam 8025 | Bernd Schwegmann GmbH & Co. KG | 非常有效的液体消泡剂，用于乳胶漆。尤其适合用于苯乙烯/丁二烯乳胶和丙烯酸共聚物。已乳化于水中。可用于乳胶漆、水性涂料、硅酸盐涂料、胶粘剂和灰泥 | |
| SCHWEGO® Foam 8325 | Bernd Schwegmann GmbH & Co. KG | Schwego® Foam 8325是一种液体、高效消泡剂，适用于所有乳胶漆，特别是基于苯乙烯/丁二烯乳胶和丙烯酸共聚物的乳胶漆。Schwego® Foam 8325在水中易乳化，不含硅 | |
| SCHWEGO® Foam 8333 | Bernd Schwegmann GmbH & Co. KG | Schwego® Foam 8333特别适用于基于聚氨酯、聚酯及其混合体系的消泡。它可有效用作消泡剂和脱气剂。Schwego® Foam 8333不含硅 | |
| SCHWEGO® Foam 8336 | Bernd Schwegmann GmbH & Co. KG | Schwego® Foam 8336消泡剂，适用于所有类型的涂料，不含颜料或者仅含少量颜料、印刷油墨和UV固化体系，特别是含丙烯酸的体系。在木器清漆和胶粘剂中也具有非常好的消泡脱气效果 | |
| SCHWEGO FOAM EL 2013 | Bernd Schwegmann GmbH & Co. KG | SCHWEGO FOAM EL 2013是一种用于溶剂型涂料系统的消泡剂。它可以减少表面张力，所以可以在多数溶剂型系统中显示高消泡能力。它可以在生产和应用过程中破坏泡沫。小量使用SCHWEGO FOAM EL 2013就可以防止泡沫在烤瓷和烘漆过程中产生。这款产品几乎适用于所有溶剂型系统，罐头涂料，醇酸树脂（风干），醇酸树脂/聚酯（热烘干），氯化橡胶，环氧化物，聚氨酯，热塑性丙烯酸和反应性丙烯酸树脂系统。 | |
| SCHWEGO® Mar 6542 | Bernd Schwegmann GmbH & Co. KG | 滑爽助剂，用于水性和UV固化涂料体系，润湿助剂。可改善抗划伤、耐磨损性能和防粘连性能。也可改善滑爽度，形成平滑表面，从而提高涂膜硬度 | |
| SCHWEGO® Mar 6561 | Bernd Schwegmann GmbH & Co. KG | Schwego® Mar 6561添加剂，应用于UV涂料，可改善耐磨损和抗刮伤性能，增加防粘连性能，改进滑爽度并增加硬度。此外，可改善UV体系的相容性。可减少灰尘粘附和起泡倾向。Schwego® Mar 6561不会影响光泽 | |
| SCHWEGO® Mar 6562 | Bernd Schwegmann GmbH & Co. KG | Schwego® Mar 6562添加剂，应用于UV涂料，可改善耐磨损和抗刮伤性能，增加防粘连性能，改进滑爽度并增加硬度。此外，可改善UV体系的相容性，增加重涂性。可减少灰尘粘附和起泡倾向。Schwego® Mar 6562不会影响光泽 | |
| SCHWEGO® Mar 8300 | Bernd Schwegmann GmbH & Co. KG | Schwego® Mar 8300主要用于常规自干和烘干漆。因为其组分，Schwego® Mar 8300可用于大部分基料体系。有时与含羟基的基料会不相容 | |
| SCHWEGO® Mar 8301 | Bernd Schwegmann GmbH & Co. KG | Schwego® Mar 8301主要用于自干和烘烤水稀释涂料。Schwego® Mar 8301在常规涂料体系中也具有良好的作用。因为其组分，Schwego® Mar 8301可用于大部分基料体系 | |
| SCHWEGO® Mar 8304 | Bernd Schwegmann GmbH & Co. KG | Schwego® Mar 8304适用于溶剂型体系，基料类型：自干醇酸、醇酸/三聚氰胺组合、聚氨酯、硝化纤维、酸固化三聚氰胺和尿素体系、无油聚酯 | |
| SCHWEGO® Mar 8305 | Bernd Schwegmann GmbH & Co. KG | Schwego® Mar 8305适用于水稀释体系，基料类型：自干醇酸、醇酸/三聚氰胺组合、自交联和添加剂交联聚丙烯酸树酯、聚氨酯、硝化纤维体系、酸硬化蜜胺和尿素树脂、无油聚酯 | |
| SCHWEGO® Mar 8310 | Bernd Schwegmann GmbH & Co. KG | 滑爽和流平助剂，用于水性涂料体系。可改善滑爽度，形成均一表面，从而提高涂膜硬度。可减小粘灰可能性，减小气泡形成，保持光泽 | |
| SCHWEGO® Mar 8311 | Bernd Schwegmann GmbH & Co. KG | SCHWEGO® Mar 8311 is a slip and leveling additive for solvent borne coating systems. The addition of this product to solvent borne coating systems improves scratch, mar and blocking resistance. SCHWEGO® Mar 8311 improves slip, therefore even surface is fo...展开 SCHWEGO® Mar 8311 is a slip and leveling additive for solvent borne coating systems. The addition of this product to solvent borne coating systems improves scratch, mar and blocking resistance. SCHWEGO® Mar 8311 improves slip, therefore even surface is formed and hence also film hardness increased. The tendency to dirt retention is diminished, disposition to foaming is reduced and gloss is conserved. 收起 | |
| SCHWEGO® Pur 8020 | Bernd Schwegmann GmbH & Co. KG | Schwego® Pur 8020适用于内墙和外墙涂料，也可用于基于聚丙烯酸、苯乙烯共聚物、PU乳液或水稀释醇酸体系的合成树脂打底和涂抹化合物或浆状填料。与丙烯酸或纤维素基增稠剂相比，它具有高保光性，尤其在高光乳胶漆中 | |
| SCHWEGO® Pur 8050 | Bernd Schwegmann GmbH & Co. KG | Schwego® Pur 8050适用于内部和外部砖石漆、水性涂料和防腐蚀涂料、改性树脂灰泥和填料。与丙烯酸和纤维素基增稠剂相比，它在高光乳胶漆中具有高保光性 |
