| Ftalon 27/70 ABT | Galstaff Multiresine S.p.A. | Ftalon 27/70 ABT is a saturated polyester that acquires the following properties if combined with proper isocyanates: fast dust-free, excellent solvent flash-off, fast drying-time, yellowing resistance, excellent mechanical resistance and surface film har...展开 Ftalon 27/70 ABT is a saturated polyester that acquires the following properties if combined with proper isocyanates: fast dust-free, excellent solvent flash-off, fast drying-time, yellowing resistance, excellent mechanical resistance and surface film hardness (panels can be stacked after 24hrs). 收起 | |
| Ftalon 34/60X | Galstaff Multiresine S.p.A. | Ftalon 34/60X provides good film curing, even with reduced quantity of isocyanates. The cured film is hard, but should be plasitized with Ftalon 42 or 43. Ftalon 34/60X is suitable for nitro varnishes for wood. | |
| Ftalon 45/75 AET 2K-PU saturated polyester | Galstaff Multiresine S.p.A. | Ftalon 45/75 AET 2K-PU is a saturated polyester with fast solvent release for 2K-PU coatings. Ftalon 45's low viscosity allows to formulate high solid coatings with good hardening. | |
| Ftalon TAC | Galstaff Multiresine S.p.A. | Ftalon TAC is a high quality polyester that combines the main charcteristics of hydroxylated acrylic resins and hydroxilated polyester resins, for the preparation of 2K-PU coatings. Ftalon TAC is suitable for car refinishing, industry and wood. This prod...展开 Ftalon TAC is a high quality polyester that combines the main charcteristics of hydroxylated acrylic resins and hydroxilated polyester resins, for the preparation of 2K-PU coatings. Ftalon TAC is suitable for car refinishing, industry and wood. This product has good resistance to yellowing and the outdoors, gloss retention and extremely low color. 收起 | |
| Ftalon TN/100 | Galstaff Multiresine S.p.A. | Ftalon TN/100 is a polyol with good flexibility and it's OH groups react at room temperature and at 45°-50°C. This resin offers high cross-linking speed with isocyanates, but it is particularly suitable for cross-linking with aliphatic isocyanates. Do to ...展开 Ftalon TN/100 is a polyol with good flexibility and it's OH groups react at room temperature and at 45°-50°C. This resin offers high cross-linking speed with isocyanates, but it is particularly suitable for cross-linking with aliphatic isocyanates. Do to it's excellent resistance, Ftalon TN/100 is suitable for marine applications. 收起 | |
| HC-Poloral P 100/S | Galstaff Multiresine S.p.A. | HC-Poloral P 100/S is an unsaturated polyester for spraying or curtain machine coatings and offers perfectly clear, colourless films without green shade. It may be used for the production of pigmented polyesters and may be added to UV co-polymers for UV r...展开 HC-Poloral P 100/S is an unsaturated polyester for spraying or curtain machine coatings and offers perfectly clear, colourless films without green shade. It may be used for the production of pigmented polyesters and may be added to UV co-polymers for UV roller basecoats. This product has excellent stability, although it's high reactivity. 收起 | |
| HELLUTEL™ HEC HR 1000 | Shandong Yiteng Chemical Limited Liability Company | HELLUTEL™ HEC HR 1000 is a light yellowish, odorless, and tasteless, non-ionic, water soluble hydroxy ethyl cellulose polymer powder. Viscosity measured at a concentration of 1% is 800-1500. HELLUTEL™ HEC is used as a thickening, water retaining, retardan...展开 HELLUTEL™ HEC HR 1000 is a light yellowish, odorless, and tasteless, non-ionic, water soluble hydroxy ethyl cellulose polymer powder. Viscosity measured at a concentration of 1% is 800-1500. HELLUTEL™ HEC is used as a thickening, water retaining, retardant, and stabilizing agent in a variety of applications including painting, construction, paper-making, cosmetics, ceramics, and oil. Applications range includes latex paint, polymer emulsifying, cement mortar, enameling, and more. 收起 | |
| HELLUTEL™ HEC HR 2000 | Shandong Yiteng Chemical Limited Liability Company | HELLUTEL™ HEC HR 2000 is a light yellowish, odorless, and tasteless, non-ionic, water soluble hydroxy ethyl cellulose polymer powder. Viscosity measured at a concentration of 1% is 1500-2500. HELLUTEL™ HEC is used as a thickening, water retaining, retarda...展开 HELLUTEL™ HEC HR 2000 is a light yellowish, odorless, and tasteless, non-ionic, water soluble hydroxy ethyl cellulose polymer powder. Viscosity measured at a concentration of 1% is 1500-2500. HELLUTEL™ HEC is used as a thickening, water retaining, retardant, and stabilizing agent in a variety of applications including painting, construction, paper-making, cosmetics, ceramics, and oil. Applications range includes latex paint, polymer emulsifying, cement mortar, enameling, and more. 收起 | |
| HELLUTEL™ HEC HR 3000 | Shandong Yiteng Chemical Limited Liability Company | HELLUTEL™ HEC HR 3000 is a light yellowish, odorless, and tasteless, non-ionic, water soluble hydroxy ethyl cellulose polymer powder. Viscosity measured at a concentration of 1% is 2600-3300. HELLUTEL™ HEC is used as a thickening, water retaining, retarda...展开 HELLUTEL™ HEC HR 3000 is a light yellowish, odorless, and tasteless, non-ionic, water soluble hydroxy ethyl cellulose polymer powder. Viscosity measured at a concentration of 1% is 2600-3300. HELLUTEL™ HEC is used as a thickening, water retaining, retardant, and stabilizing agent in a variety of applications including painting, construction, paper-making, cosmetics, ceramics, and oil. Applications range includes latex paint, polymer emulsifying, cement mortar, enameling, and more. 收起 | |
| HELLUTEL™ HEC HR 4000 | Shandong Yiteng Chemical Limited Liability Company | HELLUTEL™ HEC HR 4000 is a light yellowish, odorless, and tasteless, non-ionic, water soluble hydroxy ethyl cellulose polymer powder. Viscosity measured at a concentration of 1% is 3400-5000. HELLUTEL™ HEC is used as a thickening, water retaining, retarda...展开 HELLUTEL™ HEC HR 4000 is a light yellowish, odorless, and tasteless, non-ionic, water soluble hydroxy ethyl cellulose polymer powder. Viscosity measured at a concentration of 1% is 3400-5000. HELLUTEL™ HEC is used as a thickening, water retaining, retardant, and stabilizing agent in a variety of applications including painting, construction, paper-making, cosmetics, ceramics, and oil. Applications range includes latex paint, polymer emulsifying, cement mortar, enameling, and more. 收起 | |
| HELLUTEL™ HEC MR 2000 | Shandong Yiteng Chemical Limited Liability Company | HELLUTEL™ HEC MR 2000 is a light yellowish, odorless, and tasteless, non-ionic, water soluble hydroxy ethyl cellulose polymer powder. Viscosity measured at a concentration of 2% is 1500-2500. HELLUTEL™ HEC is used as a thickening, water retaining, retarda...展开 HELLUTEL™ HEC MR 2000 is a light yellowish, odorless, and tasteless, non-ionic, water soluble hydroxy ethyl cellulose polymer powder. Viscosity measured at a concentration of 2% is 1500-2500. HELLUTEL™ HEC is used as a thickening, water retaining, retardant, and stabilizing agent in a variety of applications including painting, construction, paper-making, cosmetics, ceramics, and oil. Applications range includes latex paint, polymer emulsifying, cement mortar, enameling, and more. 收起 | |
| HELLUTEL™ HEC MR 300 | Shandong Yiteng Chemical Limited Liability Company | HELLUTEL™ HEC MR 300 is a light yellowish, odorless, and tasteless, non-ionic, water soluble hydroxy ethyl cellulose polymer powder. Viscosity measured at a concentration of 2% is 150-400. HELLUTEL™ HEC is used as a thickening, water retaining, retardant,...展开 HELLUTEL™ HEC MR 300 is a light yellowish, odorless, and tasteless, non-ionic, water soluble hydroxy ethyl cellulose polymer powder. Viscosity measured at a concentration of 2% is 150-400. HELLUTEL™ HEC is used as a thickening, water retaining, retardant, and stabilizing agent in a variety of applications including painting, construction, paper-making, cosmetics, ceramics, and oil. Applications range includes latex paint, polymer emulsifying, cement mortar, enameling, and more. 收起 | |
| HELLUTEL™ HEC MR 5000 | Shandong Yiteng Chemical Limited Liability Company | HELLUTEL™ HEC MR 5000 is a light yellowish, odorless, and tasteless, non-ionic, water soluble hydroxy ethyl cellulose polymer powder. Viscosity measured at a concentration of 2% is 4500-6500. HELLUTEL™ HEC is used as a thickening, water retaining, retarda...展开 HELLUTEL™ HEC MR 5000 is a light yellowish, odorless, and tasteless, non-ionic, water soluble hydroxy ethyl cellulose polymer powder. Viscosity measured at a concentration of 2% is 4500-6500. HELLUTEL™ HEC is used as a thickening, water retaining, retardant, and stabilizing agent in a variety of applications including painting, construction, paper-making, cosmetics, ceramics, and oil. Applications range includes latex paint, polymer emulsifying, cement mortar, enameling, and more. 收起 | |
| Hydroxypropyl Starch Ether | Shandong Yiteng Chemical Limited Liability Company | Hydroxypropyl Starch Ether is a white (colorless) powder with good fluidity. It has good water solubility, when in an aqueous solution is transparent and colorless with good stability. This product finds application in a variety of industries including ad...展开 Hydroxypropyl Starch Ether is a white (colorless) powder with good fluidity. It has good water solubility, when in an aqueous solution is transparent and colorless with good stability. This product finds application in a variety of industries including adhesives, coating or organic liquids for building materials. 收起 | |
| Italester 205 | Galstaff Multiresine S.p.A. | Italester 205 is a hydroxylated polyester for can coatings in combination with Itamin (M and BG) resins or with blocked isocyanates (Uronal BN 75). Italester 205 is more flexible than Italester 203 and has a good adhesion sterilization resistance on crude...展开 Italester 205 is a hydroxylated polyester for can coatings in combination with Itamin (M and BG) resins or with blocked isocyanates (Uronal BN 75). Italester 205 is more flexible than Italester 203 and has a good adhesion sterilization resistance on crude steel, galvanized and on aluminum. It complies with European legislation for indirect food contract (Swiss Ordinance RS 817.023.21 Annexx 6, Part A or B). 收起 | |
| Italester 218 SND | Galstaff Multiresine S.p.A. | Italester 218 SND is a saturated polyester suitable for sealers or OPV for can coatings in combination with benzoguanamine or melamine resins (Itamin M and BG). It is also suitable for coatings for coils (appliances, metallic structures or primer for alum...展开 Italester 218 SND is a saturated polyester suitable for sealers or OPV for can coatings in combination with benzoguanamine or melamine resins (Itamin M and BG). It is also suitable for coatings for coils (appliances, metallic structures or primer for aluminum). Italester 218 SND provides excellent chemical resistance and flexibility in combination with HMMM resins (Itamin HM). 收起 | |
| Italester H27 | Galstaff Multiresine S.p.A. | Italester H27 is an isophtalic polyester suitable for water soluble primer and top-coats for packaging and stoving systems with the following characteristics: high reactivity, good hardness, good mechanical and chemical resistance and good colour retensio...展开 Italester H27 is an isophtalic polyester suitable for water soluble primer and top-coats for packaging and stoving systems with the following characteristics: high reactivity, good hardness, good mechanical and chemical resistance and good colour retension. 收起 | |
| Italester MX 353 | Galstaff Multiresine S.p.A. | Italester MX 353 is a saturated polyester for "soft touch" 2K-PU coatings for plastics (ABS, PVC, PS, PMMA, PET, etc.), metal and wood with primer. The main characteristics of Italester MX 353 include high thickness film, high flexibility and good chemica...展开 Italester MX 353 is a saturated polyester for "soft touch" 2K-PU coatings for plastics (ABS, PVC, PS, PMMA, PET, etc.), metal and wood with primer. The main characteristics of Italester MX 353 include high thickness film, high flexibility and good chemical resistances. 收起 | |
| Italkid 268 | Galstaff Multiresine S.p.A. | Italkid 268 is a hydroxylated polyester suitable for the preparation of 2K-PU systems where following charcteristics are requested: hardness, anti-scratch, toughness, non-yellowing, brightness, film transparency and colour retention. It is suitable for th...展开 Italkid 268 is a hydroxylated polyester suitable for the preparation of 2K-PU systems where following charcteristics are requested: hardness, anti-scratch, toughness, non-yellowing, brightness, film transparency and colour retention. It is suitable for the preparation of polyurethane lacquers for wood. 收起 | |
| Italkid 312 F | Galstaff Multiresine S.p.A. | Italkid 312 F is a hydroxylated polyester used for 2K-PU coatings, to be applied on : leather, rubber, wood and metal. It is usually used with Italkid 308 or 311 in combination with aromatics isocyanates (Uronal P75 N. ST., Uronal RB 60) or aliphatics (Ur...展开 Italkid 312 F is a hydroxylated polyester used for 2K-PU coatings, to be applied on : leather, rubber, wood and metal. It is usually used with Italkid 308 or 311 in combination with aromatics isocyanates (Uronal P75 N. ST., Uronal RB 60) or aliphatics (Uronal NL, Uronal NL 100). 收起 | |
| Italkid F 51 P | Galstaff Multiresine S.p.A. | Italkid F 51 P is an alkid resin for pigmented pastes that are organic or inorganic. It is suitable for pastes with good wetting properties, high pigment yield and colorimetric stability. | |
| Italkid KR 543 | Galstaff Multiresine S.p.A. | Italkid KR 543 is a short-oil alkyd resin, castor-oil and vegetable fatty acid modified, used for 2K-PU coatings for wood both for primers and mat finishes. It's main characteristics are fast hardening, good coverage, hardness and toughness, good solvent ...展开 Italkid KR 543 is a short-oil alkyd resin, castor-oil and vegetable fatty acid modified, used for 2K-PU coatings for wood both for primers and mat finishes. It's main characteristics are fast hardening, good coverage, hardness and toughness, good solvent release and long pot-life. 收起 | |
| Italkid MR 950 | Galstaff Multiresine S.p.A. | Italkid MR 950 is a medium-oil alkyd resin, used for the preparation of air-drying glossy and matt enamel, both for outdoor and indoor applications. This product has flexibility, a high percentage of pigments and fillers is allowed. It is suitable for thi...展开 Italkid MR 950 is a medium-oil alkyd resin, used for the preparation of air-drying glossy and matt enamel, both for outdoor and indoor applications. This product has flexibility, a high percentage of pigments and fillers is allowed. It is suitable for thick layer, in vertical applications. 收起 | |
| Itamin BG 142 | Galstaff Multiresine S.p.A. | Itamin BG 142 is a benzoguanamine/formaldehyde resin suitable for coil coatings with excellent wetting pigments property and high gloss. This product is suitable for stoving enamels with overbaking resistance and without gloss retention and yellowing and ...展开 Itamin BG 142 is a benzoguanamine/formaldehyde resin suitable for coil coatings with excellent wetting pigments property and high gloss. This product is suitable for stoving enamels with overbaking resistance and without gloss retention and yellowing and is more flexible than BG 141. 收起 | |
| Itamin M 172 | Galstaff Multiresine S.p.A. | Itamin M 172 is a highly reactive melamine suitable for stoving enamels, in combination with short-oil alkyd resin, even at low temperature (80-120°C). It is also suitable for can and coil coatings, thanks to it's good compatibility with saturated polyest...展开 Itamin M 172 is a highly reactive melamine suitable for stoving enamels, in combination with short-oil alkyd resin, even at low temperature (80-120°C). It is also suitable for can and coil coatings, thanks to it's good compatibility with saturated polyesters. Itamin M 172 provides high brightness and good flow, good sterilization and chemical resistance, high reactivity and low free formaldehyde. 收起 | |
| Itamin U 34 | Galstaff Multiresine S.p.A. | Itamin U 34 is a urea/formaldehyde resin suitable in combination of short-oil alkyd resins, saturated polyesters and epoxy enamels for metal. It is also suitable for can coatings, metallic furniture and acid-curing varnishes for wood furniture and wood fl...展开 Itamin U 34 is a urea/formaldehyde resin suitable in combination of short-oil alkyd resins, saturated polyesters and epoxy enamels for metal. It is also suitable for can coatings, metallic furniture and acid-curing varnishes for wood furniture and wood floors. Itamin U 34's main features are: fast reactivity, long shelf life, low formaldehyde release and very good flow. 收起 | |
| Itamin URP 91 | Galstaff Multiresine S.p.A. | Itamin URP 91 is an internally plastified urea/formaldehyde resin used for matt or gloss acid curing enamels for wood and metal. Finished products formulated with Itamin URP 91 are characterized by low free formaldehyde, high solid, high flexibility and t...展开 Itamin URP 91 is an internally plastified urea/formaldehyde resin used for matt or gloss acid curing enamels for wood and metal. Finished products formulated with Itamin URP 91 are characterized by low free formaldehyde, high solid, high flexibility and toughness, fast hardening, with weak acids and good mechanical,chemical and abrasion resistance. 收起 | |
| MELLUTEL™ YL 1500E | Shandong Yiteng Chemical Limited Liability Company | MELLUTEL™ YL 1500E is a hydroxy proply methyl cellulose. It is non-ionic and water soluble cellulose ether. It is widely used as a thickener, protective colloid, stabilizer, suspending aid, and water retention agent in many industrial applications. MELLUT...展开 MELLUTEL™ YL 1500E is a hydroxy proply methyl cellulose. It is non-ionic and water soluble cellulose ether. It is widely used as a thickener, protective colloid, stabilizer, suspending aid, and water retention agent in many industrial applications. MELLUTEL™ YL 1500E finds application in cement render and cement tile adhesives. 收起 | |
| MELLUTEL™ YL 800E | Shandong Yiteng Chemical Limited Liability Company | MELLUTEL™ YL 800E is a hydroxy proply methyl cellulose. It is non-ionic and water soluble cellulose ether. It is widely used as a thickener, protective colloid, stabilizer, suspending aid, and water retention agent in many industrial applications. MELLUTE...展开 MELLUTEL™ YL 800E is a hydroxy proply methyl cellulose. It is non-ionic and water soluble cellulose ether. It is widely used as a thickener, protective colloid, stabilizer, suspending aid, and water retention agent in many industrial applications. MELLUTEL™ YL 800E finds application in tile grouts. 收起 | |
| MELLUTEL™ YL 8E | Shandong Yiteng Chemical Limited Liability Company | MELLUTEL™ YL 8E is a hydroxy proply methyl cellulose. It is non-ionic and water soluble cellulose ether. It is widely used as a thickener, protective colloid, stabilizer, suspending aid, and water retention agent in many industrial applications. MELLUTEL™...展开 MELLUTEL™ YL 8E is a hydroxy proply methyl cellulose. It is non-ionic and water soluble cellulose ether. It is widely used as a thickener, protective colloid, stabilizer, suspending aid, and water retention agent in many industrial applications. MELLUTEL™ YL 8E finds application in gypsum plaster, gypsum join filler, cement render, ETICS/EIFS, and cement tile adhesive. 收起 | |
| MELLUTEL™ YM 10WM | Shandong Yiteng Chemical Limited Liability Company | MELLUTEL™ YM 10WM is a hydroxy proply methyl cellulose. It is non-ionic and water soluble cellulose ether. It is widely used as a thickener, protective colloid, stabilizer, suspending aid, and water retention agent in many industrial applications. MELLUTE...展开 MELLUTEL™ YM 10WM is a hydroxy proply methyl cellulose. It is non-ionic and water soluble cellulose ether. It is widely used as a thickener, protective colloid, stabilizer, suspending aid, and water retention agent in many industrial applications. MELLUTEL™ YM 10WM finds application in gypsum plaster, ETICS/EIFS, and cement tile adhesive. 收起 | |
| MELLUTEL™ YM 10WMS | Shandong Yiteng Chemical Limited Liability Company | MELLUTEL™ YM 10WMS is a hydroxy proply methyl cellulose. It is non-ionic and water soluble cellulose ether. It is widely used as a thickener, protective colloid, stabilizer, suspending aid, and water retention agent in many industrial applications. MELLUT...展开 MELLUTEL™ YM 10WMS is a hydroxy proply methyl cellulose. It is non-ionic and water soluble cellulose ether. It is widely used as a thickener, protective colloid, stabilizer, suspending aid, and water retention agent in many industrial applications. MELLUTEL™ YM 10WMS finds application in dispersion tile adhesives, detergent, and waterborne paint. 收起 | |
| MELLUTEL™ YM 15WM | Shandong Yiteng Chemical Limited Liability Company | MELLUTEL™ YM 15WM is a hydroxy proply methyl cellulose. It is non-ionic and water soluble cellulose ether. It is widely used as a thickener, protective colloid, stabilizer, suspending aid, and water retention agent in many industrial applications. MELLUTE...展开 MELLUTEL™ YM 15WM is a hydroxy proply methyl cellulose. It is non-ionic and water soluble cellulose ether. It is widely used as a thickener, protective colloid, stabilizer, suspending aid, and water retention agent in many industrial applications. MELLUTEL™ YM 15WM finds application in ETICS/EIFS, cement tile adhesive, and dispersion tile adhesive. 收起 | |
| MELLUTEL™ YM 15WMS | Shandong Yiteng Chemical Limited Liability Company | MELLUTEL™ YM 15WMS is a hydroxy proply methyl cellulose. It is non-ionic and water soluble cellulose ether. It is widely used as a thickener, protective colloid, stabilizer, suspending aid, and water retention agent in many industrial applications. MELLUT...展开 MELLUTEL™ YM 15WMS is a hydroxy proply methyl cellulose. It is non-ionic and water soluble cellulose ether. It is widely used as a thickener, protective colloid, stabilizer, suspending aid, and water retention agent in many industrial applications. MELLUTEL™ YM 15WMS finds application in ETICS/EIFS, cement tile adhesives, dispersion tile adhesives, detergent, and waterborne paint. 收起 | |
| MELLUTEL™ YM 20WM | Shandong Yiteng Chemical Limited Liability Company | MELLUTEL™ YM20 WM is a hydroxy proply methyl cellulose. It is non-ionic and water soluble cellulose ether. It is widely used as a thickener, protective colloid, stabilizer, suspending aid, and water retention agent in many industrial applications. MELLUTE...展开 MELLUTEL™ YM20 WM is a hydroxy proply methyl cellulose. It is non-ionic and water soluble cellulose ether. It is widely used as a thickener, protective colloid, stabilizer, suspending aid, and water retention agent in many industrial applications. MELLUTEL™ YM 20WM finds application in ETICS/EIFS and cement tile adhesive. 收起 | |
| MELLUTEL™ YM 20WMS | Shandong Yiteng Chemical Limited Liability Company | MELLUTEL™ YM 20WMS is a hydroxy proply methyl cellulose. It is non-ionic and water soluble cellulose ether. It is widely used as a thickener, protective colloid, stabilizer, suspending aid, and water retention agent in many industrial applications. MELLUT...展开 MELLUTEL™ YM 20WMS is a hydroxy proply methyl cellulose. It is non-ionic and water soluble cellulose ether. It is widely used as a thickener, protective colloid, stabilizer, suspending aid, and water retention agent in many industrial applications. MELLUTEL™ YM 20WMS finds application in dispersion tile adhesives. 收起 | |
| MELLUTEL™ YT 40M | Shandong Yiteng Chemical Limited Liability Company | MELLUTEL™ YT 40M is a hydroxy proply methyl cellulose. It is non-ionic and water soluble cellulose ether. It is widely used as a thickener, protective colloid, stabilizer, suspending aid, and water retention agent in many industrial applications. MELLUTEL...展开 MELLUTEL™ YT 40M is a hydroxy proply methyl cellulose. It is non-ionic and water soluble cellulose ether. It is widely used as a thickener, protective colloid, stabilizer, suspending aid, and water retention agent in many industrial applications. MELLUTEL™ YT 40M finds application in gypsum plaster, gypsum join filler, cement render, ETICS/EIFS, and cement tile adhesive. 收起 | |
| MELLUTEL™ YT 70M | Shandong Yiteng Chemical Limited Liability Company | MELLUTEL™ YT 70M is a hydroxy proply methyl cellulose. It is non-ionic and water soluble cellulose ether. It is widely used as a thickener, protective colloid, stabilizer, suspending aid, and water retention agent in many industrial applications. MELLUTEL...展开 MELLUTEL™ YT 70M is a hydroxy proply methyl cellulose. It is non-ionic and water soluble cellulose ether. It is widely used as a thickener, protective colloid, stabilizer, suspending aid, and water retention agent in many industrial applications. MELLUTEL™ YT 70M finds application in gypsum plaster, cement render, ETICS/EIFS, and cement tile adhesive. 收起 | |
| Poloral G 650 | Galstaff Multiresine S.p.A. | Poloral G 650 is a highly reactive allylic unsaturated polyester formulated for UV and Redox applications. Clear or pigmented coatings with excellent body, flow and outstanding sanding and polishing can be obtained with Poloral G 650. This product is usua...展开 Poloral G 650 is a highly reactive allylic unsaturated polyester formulated for UV and Redox applications. Clear or pigmented coatings with excellent body, flow and outstanding sanding and polishing can be obtained with Poloral G 650. This product is usually used for both glossy and matt UV topcoats with smooth, clear and hard surface. 收起 | |
| Poloral K 128 | Galstaff Multiresine S.p.A. | Poloral K 128 is a not pre-accelerated unsaturated polyester, dissolved in Styrene, with a medium viscosity. The main applications are the preparations of putties and mastics, for sticking or repairing surface defects of natural or synthetic stones and ma...展开 Poloral K 128 is a not pre-accelerated unsaturated polyester, dissolved in Styrene, with a medium viscosity. The main applications are the preparations of putties and mastics, for sticking or repairing surface defects of natural or synthetic stones and marbles. The curing time hardness and the adhesion are peculiar characteristics of Poloral K 128, even at low temperature. 收起 | |
| Poloral UV 92/85 ABT | Galstaff Multiresine S.p.A. | Poloral UV 92/85 ABT is a highly reactive, UV - curable unsaturated polyester for free styrene systems with outstanding UV reactivity. It is the most suitable product for wood coatings. Poloral UV 92/85 ABT is largely used also for UV-curable sanding seal...展开 Poloral UV 92/85 ABT is a highly reactive, UV - curable unsaturated polyester for free styrene systems with outstanding UV reactivity. It is the most suitable product for wood coatings. Poloral UV 92/85 ABT is largely used also for UV-curable sanding sealer, to be applied by curtain coater. 收起 | |
| Sintal A 213 | Galstaff Multiresine S.p.A. | Sintal A 213 is an alkyd resin used for the formulation of high solid stoving enamels thanks to it's easy thinning. It can be used in combination with Sintal R 254 to have better flexibility and can also be used for clear or pigmented nitro systems. | |
| Sintal G 63/70 RM | Galstaff Multiresine S.p.A. | Sintal G 63/70 RM is largely used to prepare white enamels for buildings. This product shows an excellent yellowing resistance. For indoor use, it is often mixed with Sintal S50/50 RM to improve dust-free (30'-40') and hardening speed. | |
| Sintal L45/60 X | Galstaff Multiresine S.p.A. | Sintal L45/60 X is an alkyd resin with fast drying time, high mechanical and moisture resistance and good wetting property. It is suitable for antirust primer, gloss enamels for industry mixed with chlorinated rubber. This product is not recommended for w...展开 Sintal L45/60 X is an alkyd resin with fast drying time, high mechanical and moisture resistance and good wetting property. It is suitable for antirust primer, gloss enamels for industry mixed with chlorinated rubber. This product is not recommended for white or light color. 收起 | |
| Sintal R 05/60X | Galstaff Multiresine S.p.A. | Sintal R 05/60X is a modified alkyd resin with the following characteristics: excellent adhesion on metal, fast dust-free and touch-free. It's main applications are antirust basecoats for steel pieces, matt and gloss enamels with fast drying time and good...展开 Sintal R 05/60X is a modified alkyd resin with the following characteristics: excellent adhesion on metal, fast dust-free and touch-free. It's main applications are antirust basecoats for steel pieces, matt and gloss enamels with fast drying time and good solvents resistance. clear nitro sanding sealers for wood, colorants and inks for wood. 收起 | |
| Sintal S 380/60 T | Galstaff Multiresine S.p.A. | Sintal S 380/60 T is an air-drying resin for high quality road-marking paints. It's main characteristics include high adhesion and resistance, excellent colour retention and fast drying time. Sintal S 380/60 T is suitable for air-drying enamels and for st...展开 Sintal S 380/60 T is an air-drying resin for high quality road-marking paints. It's main characteristics include high adhesion and resistance, excellent colour retention and fast drying time. Sintal S 380/60 T is suitable for air-drying enamels and for stoving materials in combination with urea or melamine resins. 收起 | |
| STANLUX® Gold 12000 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 12000 is a fine bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment offers opacity, gloss and printability for flexographic and gravure systems. STANLUX® Gold 1...展开 STANLUX® Gold 12000 is a fine bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment offers opacity, gloss and printability for flexographic and gravure systems. STANLUX® Gold 12000 is available in several shades and has an average size of 16 microns. 收起 | |
| STANLUX® Gold 13000 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 13000 is a fine bronze powder constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment offers opacity, gloss and printability for use in flexographic and gravure systems. STANLUX® Gold 13...展开 STANLUX® Gold 13000 is a fine bronze powder constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment offers opacity, gloss and printability for use in flexographic and gravure systems. STANLUX® Gold 13000 is available in several shades and has an average size of 16 microns. 收起 | |
| STANLUX® Gold 13300 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 13300 is a fine bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment offers opacity, gloss and printability for flexographic and gravure systems. STANLUX® Gold 1...展开 STANLUX® Gold 13300 is a fine bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment offers opacity, gloss and printability for flexographic and gravure systems. STANLUX® Gold 13300 is available in several shades and has an average size of 12 microns. 收起 | |
| STANLUX® Gold 14000 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 14000 is super fine bronze powder constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment generates decorative metallic effects and is used in offset printing inks. STANLUX® Gold 14000 i...展开 STANLUX® Gold 14000 is super fine bronze powder constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment generates decorative metallic effects and is used in offset printing inks. STANLUX® Gold 14000 is available in several shades and has an average size of 5 microns. 收起 | |
| STANLUX® Gold 2000 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 2000 is a coarse bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in decorative paints and is recommended for applications where high brilliance is r...展开 STANLUX® Gold 2000 is a coarse bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in decorative paints and is recommended for applications where high brilliance is required. STANLUX® Gold 2000 is available in several shades and has an average size of 50 microns. 收起 | |
| STANLUX® Gold 2100 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 2100 is a coarse bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in decorative paints and is recommended for applications where high brilliance is r...展开 STANLUX® Gold 2100 is a coarse bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in decorative paints and is recommended for applications where high brilliance is required. STANLUX® Gold 2100 is available in several shades and has an average size of 50 microns. 收起 | |
| STANLUX® Gold 2700 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 2700 is a coarse bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in decorative paints and is recommended for applications where high brilliance is r...展开 STANLUX® Gold 2700 is a coarse bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in decorative paints and is recommended for applications where high brilliance is required. STANLUX® Gold 2700 is available in several shades and has an average size of 45 microns. 收起 | |
| STANLUX® Gold 2800 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 2800 is a coarse bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in decorative paints and is recommended for applications where high brilliance is r...展开 STANLUX® Gold 2800 is a coarse bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in decorative paints and is recommended for applications where high brilliance is required. STANLUX® Gold 2800 is available in several shades and has an average size of 45 microns. 收起 | |
| STANLUX® Gold 3500 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 3500 is a coarse bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in decorative paints and is recommended for applications where high brilliance is r...展开 STANLUX® Gold 3500 is a coarse bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in decorative paints and is recommended for applications where high brilliance is required. STANLUX® Gold 3500 is available in several shades and has an average size of 35 microns. 收起 | |
| STANLUX® Gold 3600 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 3600 is a coarse bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in decorative paints and is recommended for applications where high brilliance is r...展开 STANLUX® Gold 3600 is a coarse bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in decorative paints and is recommended for applications where high brilliance is required. STANLUX® Gold 3600 is available in several shades and has an average size of 35 microns. 收起 | |
| STANLUX® Gold 4500 (Shade C) | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 4500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is reco...展开 STANLUX® Gold 4500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is recommended for applications where high brilliance and hiding power are required. STANLUX® Gold 4500 has an average size of 25 microns and a 1.5% water retention rate with 3.4 - 4.2 (cm²/g Min) water coverage property. 收起 | |
| STANLUX® Gold 4500 (Shade D) | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 4500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints, and silk screen inks, and it is rec...展开 STANLUX® Gold 4500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints, and silk screen inks, and it is recommended for applications where high brilliance and hiding power are required. STANLUX® Gold 4500 has an average size of 30 microns and a 8% water retention rate with a 3.4 - 4.2 (cm²/g Min) water coverage property. 收起 | |
| STANLUX® Gold 4500 (Shades P - RP - R) | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 4500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is reco...展开 STANLUX® Gold 4500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is recommended for applications where high brilliance and hiding power are required. STANLUX® Gold 4500 has an average size of 25 microns and a 1.5% water retention rate with 4.3-5.4 (cm²/g Min) water coverage property. 收起 | |
| STANLUX® Gold 4600 (Shade C) | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 4600 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is reco...展开 STANLUX® Gold 4600 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is recommended for applications where high brilliance and hiding power are required. STANLUX® Gold 4600 has an average size of 30 microns and a 1.5% water retention rate with a 3.4 - 4.2 (cm²/g Min) water coverage property. 收起 | |
| STANLUX® Gold 4600 (Shades P - RP - R) | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 4600 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is reco...展开 STANLUX® Gold 4600 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is recommended for applications where high brilliance and hiding power are required. STANLUX® Gold 4600 has an average size of 30 microns and a 1.5% water retention rate with a 4.3 - 5.4 (cm²/g Min) water coverage property. 收起 | |
| STANLUX® Gold 5500 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 5500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is reco...展开 STANLUX® Gold 5500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is recommended for applications where regular surface finish and hiding power are required. STANLUX® Gold 5500 is available in several shades and has an average size of 23 microns. It possesses a 0.5% water retention rate with a 4.2 - 6.0 (cm²/g Min) water coverage property. 收起 | |
| STANLUX® Gold 6500 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 6500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is reco...展开 STANLUX® Gold 6500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is recommended for applications where regular surface finish and hiding power are required. STANLUX® Gold 6500 is available in several shades and has an average size of 20 microns. It possesses a 5% water retention rate with a 5.5 - 6.5 (cm²/g Min) water coverage property. 收起 | |
| STANLUX® Gold 7500 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 7500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is reco...展开 STANLUX® Gold 7500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is recommended for applications where regular surface finish and hiding power are required. STANLUX® Gold 7500 is available in several shades and has an average size of 18 microns. It possesses a 0.8% water retention rate with a 6.3 - 7.5 (cm²/g Min) water coverage property. 收起 | |
| STANLUX® Hydro 140 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Hydro 140 is a stabilized aluminium leafing paste with medium-coarse lamellar particles, recommended for use in waterborne paints. This product has a maximum retention of 1% in # 325 mesh. | |
| STANLUX® Hydro 150 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Hydro 150 is a stabilized aluminium leafing paste with medium-coarse lamellar particles, recommended for use in waterborne paints. This product has a maximum retention of 4% in # 325 mesh. | |
| STANLUX® Paste 100 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 100 is a leafing type aluminum paste made of lamellar particles covered with stearic acid. This product creates a unique shiny aesthetic effect that provides the applied system with a protective barrier, coverage, corrosion resistance, and ...展开 STANLUX® Paste 100 is a leafing type aluminum paste made of lamellar particles covered with stearic acid. This product creates a unique shiny aesthetic effect that provides the applied system with a protective barrier, coverage, corrosion resistance, and thermal reflection. STANLUX® Paste 100 is specially recommended for formulation systems with low tolerance to aliphatic solvent and is commonly used for maintenance and general industrial paints. 收起 | |
| STANLUX® Paste 100N | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 100N is a non-leafing type aluminum paste made of lamellar particles covered with stearic acid. This product creates a unique shiny aesthetic effect that provides the applied system with a protective barrier, coverage, corrosion resistance,...展开 STANLUX® Paste 100N is a non-leafing type aluminum paste made of lamellar particles covered with stearic acid. This product creates a unique shiny aesthetic effect that provides the applied system with a protective barrier, coverage, corrosion resistance, and thermal reflection. STANLUX® Paste 100N is specially recommended for formulation systems with low tolerance to aliphatic solvent and is commonly used for maintenance, protective, or marine coatings. 收起 | |
| STANLUX® Paste 1100 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 1100 is a non-leafing type aluminum paste made of lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1100 is specially recommended for formulation...展开 STANLUX® Paste 1100 is a non-leafing type aluminum paste made of lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1100 is specially recommended for formulation systems with low tolerance to aliphatic solvent and is commonly used for maintenance, protective and marine coatings, and roof coatings. It has an average particle size of 18 microns and uses a combined solvent of MS (Mineral Spirit) and HA (High Aromatic.) 收起 | |
| STANLUX® Paste 1100N | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 1100N is a non-leafing type aluminum paste made of lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1100N is specially recommended for formulatio...展开 STANLUX® Paste 1100N is a non-leafing type aluminum paste made of lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1100N is specially recommended for formulation systems with low tolerance to aliphatic solvent and is commonly used for maintenance, protective and marine coatings, and roof coatings. It has an average particle size of 18 microns and uses High Aromatic solvent. 收起 | |
| STANLUX® Paste 1120 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 1120 is a non-leafing type aluminum paste made of lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1120 is specially recommended for formulation ...展开 STANLUX® Paste 1120 is a non-leafing type aluminum paste made of lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1120 is specially recommended for formulation systems with low tolerance to aliphatic solvent and is commonly used for maintenance, protective and marine coatings, and roof coatings. It has an average particle size of 17 microns and uses a combined solvent of MS (Mineral Spirit) and HA (High Aromatic.) 收起 | |
| STANLUX® Paste 1130 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 1130 is a non-leafing type aluminum paste made of fine lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1130 is specially recommended for use in ...展开 STANLUX® Paste 1130 is a non-leafing type aluminum paste made of fine lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1130 is specially recommended for use in decorative paints, industrial paints, maintenance, protective and marine coatings, and trade paints. It has an average particle size of 11 microns and uses a combined solvent of MS (Mineral Spirit) and HA (High Aromatic.) 收起 | |
| STANLUX® Paste 120 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 120 is a leafing type aluminum paste made of lamellar particles covered with stearic acid. This product has a high leafing value that adds a durable and protective property to paints. STANLUX® Paste 120 commonly used for general industrial...展开 STANLUX® Paste 120 is a leafing type aluminum paste made of lamellar particles covered with stearic acid. This product has a high leafing value that adds a durable and protective property to paints. STANLUX® Paste 120 commonly used for general industrial paints, decorative and/or architectural paints, and maintenance paints. It has an average particle size of 17 microns and a minimum water coverage of 20,000 cm2/g. 收起 | |
| STANLUX® Paste 1200 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 1200 is a non-leafing type aluminum paste made of lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1200 has a high degree of hiding power and is ...展开 STANLUX® Paste 1200 is a non-leafing type aluminum paste made of lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1200 has a high degree of hiding power and is recommended for use in internal can coatings. It has an average particle size of 14 microns and uses a combined solvent of MS (Mineral Spirit) and HA (High Aromatic.) 收起 | |
| STANLUX® Paste 1290 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 1290 is a non-leafing type aluminum paste made of fine lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1290 has a high degree of hiding power an...展开 STANLUX® Paste 1290 is a non-leafing type aluminum paste made of fine lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1290 has a high degree of hiding power and is recommended for use in internal can coatings. It has an average particle size of 8 microns and uses a combined solvent of MS (Mineral Spirit) and HA (High Aromatic.) 收起 | |
| STANLUX® Paste 130 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 130 is a leafing type aluminum paste made of lamellar particles covered with stearic acid. This product has a high leafing value that adds a durable and protective property to paints. STANLUX® Paste 130 commonly used for general industrial ...展开 STANLUX® Paste 130 is a leafing type aluminum paste made of lamellar particles covered with stearic acid. This product has a high leafing value that adds a durable and protective property to paints. STANLUX® Paste 130 commonly used for general industrial paints, decorative and/or architectural paints, and maintenance paints. It has an average particle size of 19 microns and a minimum water coverage of 21,000 cm2/g. 收起 | |
| STANLUX® Paste 130N | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 130N is a leafing type aluminum paste made of lamellar particles covered with stearic acid. This product has a high leafing value that adds a durable and protective property to paints. STANLUX® Paste 130N is specially recommended for applic...展开 STANLUX® Paste 130N is a leafing type aluminum paste made of lamellar particles covered with stearic acid. This product has a high leafing value that adds a durable and protective property to paints. STANLUX® Paste 130N is specially recommended for application in formulations based on resins that are incompatible with aliphatic solvents and is commonly used for general industrial paints, decorative and/or architectural paints, and maintenance paints. It has an average particle size of 19 microns and a minimum water coverage of 21,000 cm2/g. 收起 | |
| STANLUX® Paste 140 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 140 is a leafing type aluminum paste made of lamellar particles covered with stearic acid. This product has a high leafing value that adds a durable and protective property to paints. STANLUX® Paste 140 is recommended for application in for...展开 STANLUX® Paste 140 is a leafing type aluminum paste made of lamellar particles covered with stearic acid. This product has a high leafing value that adds a durable and protective property to paints. STANLUX® Paste 140 is recommended for application in formulations that require aluminium pigment with high metallic effect and is commonly used for general industrial paints, decorative and/or architectural paints, and maintenance paints. It has an average particle size of 19 microns and a minimum water coverage of 21,000 cm2/g. 收起 | |
| STANLUX® Paste 150 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 150 is a leafing type aluminum paste made of medium-coarse lamellar particles covered with stearic acid. STANLUX® Paste 150 is recommended for application in formulations that require aluminium pigment with high metallic effect and is commo...展开 STANLUX® Paste 150 is a leafing type aluminum paste made of medium-coarse lamellar particles covered with stearic acid. STANLUX® Paste 150 is recommended for application in formulations that require aluminium pigment with high metallic effect and is commonly used for industrial paints, and roof coatings. It has an average particle size of 19 microns and a minimum water coverage of 14,000 cm2/g. 收起 | |
| STANLUX® Paste 1600 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 1600 is a non-leafing type aluminum paste made of lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1600 is considered to be standard level and is...展开 STANLUX® Paste 1600 is a non-leafing type aluminum paste made of lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1600 is considered to be standard level and is recommended for paint formulations that require aluminium pigment with high metallic effect including: aerosol spray decorative paints, industrial paints, maintenance paints, protective and marine coatings, and trade paints. It has an average particle size of 23 microns and uses a combined solvent of MS (Mineral Spirit) and HA (High Aromatic.) 收起 | |
| STANLUX® Paste 1600N | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 1600N is a non-leafing type aluminum paste made of lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1600N is considered to be standard level and ...展开 STANLUX® Paste 1600N is a non-leafing type aluminum paste made of lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1600N is considered to be standard level and is recommended for formulation systems with low tolerance to aliphatic solvent. It has an average particle size of 23 microns and uses a HA (High Aromatic) solvent. Applications include: aerosol spray decorative paints, industrial paints, maintenance paints, protective and marine coatings, and trade paints. 收起 | |
| STANLUX® Paste 166 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 166 is a leafing type aluminum paste made of medium size lamellar particles covered with stearic acid. STANLUX® Paste 166 is recommended for application in high grade and brilliant protective paints and is commonly used for decorative paint...展开 STANLUX® Paste 166 is a leafing type aluminum paste made of medium size lamellar particles covered with stearic acid. STANLUX® Paste 166 is recommended for application in high grade and brilliant protective paints and is commonly used for decorative paints, industrial paints, and trade paints. It has an average particle size of 15 microns and a minimum water coverage of 22,000cm2/g. 收起 | |
| STANLUX® Paste 1700 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 1700 is a non-leafing type aluminum paste made of lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1700 is considered to be standard level and is...展开 STANLUX® Paste 1700 is a non-leafing type aluminum paste made of lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1700 is considered to be standard level and is recommended for formulation systems with low tolerance to aliphatic solvent. It has an average particle size of 21 microns and uses a HA (High Aromatic) and MS (Mineral Spirit) solvent. Applications include: aerosol spray decorative paints, industrial paints, maintenance paints, protective and marine coatings, and trade paints. 收起 | |
| STANLUX® Paste 1770 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 1770 is a non-leafing type aluminum paste made of medium lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1770 is considered to be standard level...展开 STANLUX® Paste 1770 is a non-leafing type aluminum paste made of medium lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1770 is considered to be standard level and is recommended for formulation systems with low tolerance to aliphatic solvent. It has an average particle size of 16 microns and uses a HA (High Aromatic) and MS (Mineral Spirit) solvent. Applications include: aerosol spray decorative paints, industrial paints, maintenance paints, protective and marine coatings, and trade paints. 收起 | |
| STANLUX® Paste 1770/60 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 1770/60 is a non-leafing type aluminum paste made of medium lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1770/60 is considered to be standard...展开 STANLUX® Paste 1770/60 is a non-leafing type aluminum paste made of medium lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1770/60 is considered to be standard level and is recommended for formulation systems with low tolerance to aliphatic solvent. It has an average particle size of 16 microns and uses a HA (High Aromatic) and MS (Mineral Spirit) solvent. STANLUX® Paste 1770/60 has the same characteristics of Stanlux Paste 1770 with 60% of solids. Applications include: aerosol spray decorative paints, industrial paints, maintenance paints, protective and marine coatings, and trade paints. 收起 | |
| STANLUX® Paste 1870 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 1870 is a non-leafing type aluminum paste made of medium lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1870 is considered to be standard level...展开 STANLUX® Paste 1870 is a non-leafing type aluminum paste made of medium lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1870 is considered to be standard level and is recommended for systems requiring differentiated metallic finishes, brighter color, and high hiding power. It has an average particle size of 16 microns and uses a HA (High Aromatic) and MS (Mineral Spirit) solvent. Applications include: aerosol spray decorative paints, industrial paints, and trade paints. 收起 | |
| STANLUX® Paste 1900 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 1900 is a non-leafing type aluminum paste made of coarse lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1900 is considered to be standard level...展开 STANLUX® Paste 1900 is a non-leafing type aluminum paste made of coarse lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1900 is considered to be standard level and is recommended for systems requiring protective properties. It has an average particle size of 32 microns and uses a HA (High Aromatic) and MS (Mineral Spirit) solvent. Applications include: industrial paints, maintenance, protective and marine coatings. 收起 | |
| STANLUX® Paste 200 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 200 is a leafing type aluminum paste made of lamellar particles covered with stearic acid. STANLUX® Paste 200 is recommended for application in high grade and brilliant protective paints and is commonly used for decorative paints, trade pai...展开 STANLUX® Paste 200 is a leafing type aluminum paste made of lamellar particles covered with stearic acid. STANLUX® Paste 200 is recommended for application in high grade and brilliant protective paints and is commonly used for decorative paints, trade paints, and printing inks. It has an average particle size of 14 microns and a minimum water coverage of 20,000 cm2/g. 收起 | |
| STANLUX® Paste 2000 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 2000 is a non-leafing type aluminum paste made of medium lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 2000 is considered to be standard level...展开 STANLUX® Paste 2000 is a non-leafing type aluminum paste made of medium lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 2000 is considered to be standard level and is recommended for systems requiring differentiated metallic effects, and brighter metallic pigment. It has an average particle size of 21 microns and uses a HA (High Aromatic) and MS (Mineral Spirit) solvent. Applications include: decorative paints, industrial paints, and trade paints. 收起 | |
| STANLUX® Paste 200N | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 200N is a leafing type aluminum paste made of lamellar particles covered with stearic acid. STANLUX® Paste 200N is recommended for application in products requiring high covering power and is commonly used for decorative paints, trade paint...展开 STANLUX® Paste 200N is a leafing type aluminum paste made of lamellar particles covered with stearic acid. STANLUX® Paste 200N is recommended for application in products requiring high covering power and is commonly used for decorative paints, trade paints, and printing inks. It has an average particle size of 14 microns and a minimum water coverage of 20,000 cm2/g. 收起 | |
| STANLUX® Paste 260 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 260 is a leafing type aluminum paste made of fine lamellar particles covered with stearic acid. STANLUX® Paste 260 is specially recommended for printing inks and is commonly used for aerosol spray decorative paints, flexographic printing in...展开 STANLUX® Paste 260 is a leafing type aluminum paste made of fine lamellar particles covered with stearic acid. STANLUX® Paste 260 is specially recommended for printing inks and is commonly used for aerosol spray decorative paints, flexographic printing inks, and gravure printing inks. It has an average particle size of 14 microns and a minimum water coverage of 28,000 cm2/g. 收起 | |
| STANLUX® Paste 266 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 266 is a leafing type aluminum paste made of fine lamellar particles covered with stearic acid. STANLUX® Paste 266 is specially recommended for high grade and brilliant printing inks and is commonly used for aerosol spray decorative paints,...展开 STANLUX® Paste 266 is a leafing type aluminum paste made of fine lamellar particles covered with stearic acid. STANLUX® Paste 266 is specially recommended for high grade and brilliant printing inks and is commonly used for aerosol spray decorative paints, flexographic and gravure printing inks that require aluminium pigment with a high metallic effect. It has an average particle size of 14 microns and a minimum water coverage of 28,000 cm2/g. 收起 | |
| STANLUX® Paste 270/70 IPA | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 270/70 IPA is a leafing type aluminum paste made of fine lamellar particles covered with stearic acid and is suitable with solvent for high grade printing inksthat require low odour property. STANLUX® Paste 270/70 IPA is specially recomme...展开 STANLUX® Paste 270/70 IPA is a leafing type aluminum paste made of fine lamellar particles covered with stearic acid and is suitable with solvent for high grade printing inksthat require low odour property. STANLUX® Paste 270/70 IPA is specially recommended for printing inks and is commonly used for flexography and gravure free of residual solvent odour. It has an average particle size of 11 microns and a minimum water coverage of 30,000 cm2/g. 收起 | |
| STANLUX® Paste 280 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 280 is a leafing type aluminum paste made of fine lamellar particles covered with stearic acid. STANLUX® Paste 280 is specially recommended for high grade printing inks and is commonly used for aerosol spray decorative paints, flexographic ...展开 STANLUX® Paste 280 is a leafing type aluminum paste made of fine lamellar particles covered with stearic acid. STANLUX® Paste 280 is specially recommended for high grade printing inks and is commonly used for aerosol spray decorative paints, flexographic and gravure printing inks that require aluminium pigment with a high metallic effect. It has an average particle size of 12 microns and a minimum water coverage of 34,000 cm2/g. 收起 | |
| STANLUX® Paste 290 60EA | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 290 60EA is a leafing type aluminum paste made of fine lamellar particles covered with stearic acid and is suitable with solvent for high grade printing inksthat require low odour property. STANLUX® Paste 290 60EA is specially recommended f...展开 STANLUX® Paste 290 60EA is a leafing type aluminum paste made of fine lamellar particles covered with stearic acid and is suitable with solvent for high grade printing inksthat require low odour property. STANLUX® Paste 290 60EA is specially recommended for printing inks and is commonly used for flexography and gravure free of residual solvent odour. It has an average particle size of 9 microns and a minimum water coverage of 45,000 cm2/g. 收起 | |
| STANLUX® Paste 290 60MO | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 290 60MO is a leafing type aluminum paste made of fine lamellar particles covered with stearic acid and is formulated for high-grade offset printing inks. STANLUX® Paste 290 60MO is specially recommended for printing inks and is commonly u...展开 STANLUX® Paste 290 60MO is a leafing type aluminum paste made of fine lamellar particles covered with stearic acid and is formulated for high-grade offset printing inks. STANLUX® Paste 290 60MO is specially recommended for printing inks and is commonly used for offset printing ink free of residual solvent odour. It has an average particle size of 9 microns and a minimum water coverage of 45,000 cm2/g. 收起 | |
| STANLUX® Paste 340 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 340 is a leafing type aluminum paste made of coarse lamellar particles covered with stearic acid that provide a reflection effect or barrier protection. STANLUX® Paste 340 is specially recommended for printing inks and is commonly used for ...展开 STANLUX® Paste 340 is a leafing type aluminum paste made of coarse lamellar particles covered with stearic acid that provide a reflection effect or barrier protection. STANLUX® Paste 340 is specially recommended for printing inks and is commonly used for maintenance, protective and marine coatings, and roof coatings. It has an average particle size of 21 microns and a minimum water coverage of 9,000 cm2/g. 收起 | |
| STANLUX® Paste 340N | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 340N is a leafing type aluminum paste made of coarse lamellar particles covered with stearic acid that provide a reflective effect. STANLUX® Paste 340N is specially recommended for application in formulations based on resins that are incomp...展开 STANLUX® Paste 340N is a leafing type aluminum paste made of coarse lamellar particles covered with stearic acid that provide a reflective effect. STANLUX® Paste 340N is specially recommended for application in formulations based on resins that are incompatible with aliphatic solvents and is commonly used for maintenance, protective, marine, and roof coatings. It has an average particle size of 21 microns and a minimum water coverage of 9,000 cm2/g. 收起 | |
| STANLUX® Pell Gold 130 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Pell Gold 130 is a fine bronze powder pigment in pellet form, that disperses in solvents like ethyl acetate or ethyl alcohol and eliminates dust during handling. It has an average particle size of 16 microns and provides opacity and gloss to appl...展开 STANLUX® Pell Gold 130 is a fine bronze powder pigment in pellet form, that disperses in solvents like ethyl acetate or ethyl alcohol and eliminates dust during handling. It has an average particle size of 16 microns and provides opacity and gloss to applied systems. STANLUX® Pell Gold 130 is available is several shades and is recommended for use in flexographic and gravure printing inks. 收起 | |
| STANLUX® Pell Gold 131 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Pell Gold 131 is a fine bronze powder pigment in pellet form, that disperses in solvents like ethyl acetate or ethyl alcohol and eliminates dust during handling. It has an average particle size of 16 microns and provides opacity and gloss to appl...展开 STANLUX® Pell Gold 131 is a fine bronze powder pigment in pellet form, that disperses in solvents like ethyl acetate or ethyl alcohol and eliminates dust during handling. It has an average particle size of 16 microns and provides opacity and gloss to applied systems. STANLUX® Pell Gold 130 is recommended for use in flexographic and gravure printing inks. 收起 |
