| Advantage™ AM1512A | Ashland | Advantage™ AM1512A is a 100% active foam control agent designed specifically for use in water-based paint systems. It is a high efficiency, hydrocarbon oil-based antifoaming agent and is formulated to control foam at any point during manufacture, packagin...展开 Advantage™ AM1512A is a 100% active foam control agent designed specifically for use in water-based paint systems. It is a high efficiency, hydrocarbon oil-based antifoaming agent and is formulated to control foam at any point during manufacture, packaging, or application of the paint. Its efficiency is not adversely affected by temperature or pH and it is effective in the presence of many surfactants. Advantage™ AM1512A foam control agent is readily dispersible, has an outstanding long-term foam control persistency, and Advantage™ AW8176 defoamer is readily dispersible, has very good long-term persistency, and it is recommended for architectural paints, emulsions plasters, pigment/filler slurries, as well as industrial wood coatings. 收起 | |
| Aquaflow™ NHS-300 | Ashland | Aquaflow™ NHS-300 is a rheology modifier for waterborne architectural coatings. A solvent-free, nonionic associative polymer solution designed to increase high-shear viscosity and provide superior flow and leveling in latex paints. | |
| Aquaflow™ NHS-350 | Ashland | Aquaflow™ NHS-350 is a solvent-free, non-ionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings and is compatible with most latex resin systems. | |
| Aquaflow™ NHS-355 | Ashland | Aquaflow™ NHS-355 rheology modifier is a solvent-free, nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings and is compatible with most latex resin systems. This thickener provides efficient ICI viscosity development...展开 Aquaflow™ NHS-355 rheology modifier is a solvent-free, nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings and is compatible with most latex resin systems. This thickener provides efficient ICI viscosity development, excellent film build, and favorable brush drag. As an APEO-free and solvent-free product, Aquaflow™ NHS-355 rheology modifier is recommended for low VOC formulations. It is supplied as a low viscosity liquid for ease of handling. The performance of the product is independent of paint pH 收起 | |
| Aquaflow™ NHS-360 | Ashland | Aquaflow™ NHS-360 rheology modifier is a high-shear effective, low VOC, nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings, and is compatible with most modern latex resin systems and all sheens. This thickener prov...展开 Aquaflow™ NHS-360 rheology modifier is a high-shear effective, low VOC, nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings, and is compatible with most modern latex resin systems and all sheens. This thickener provides highly efficient ICI viscosity development, excellent film build, optimal flow and leveling and favorable brush drag. 收起 | |
| Aquaflow™ NLS-200 | Ashland | Aquaflow™ NLS-200 is a rheology modifier for waterborne architectural coatings. A nonionic associative polymer solution designed to build stormer viscosity and provide superior flow and leveling in latex paints. | |
| Aquaflow™ NLS-210 | Ashland | Aquaflow™ NLS-210 is a nonionic associative polymer solution designed to increase Stormer consistency and provide superior flow and leveling in waterborne paints and coatings. | |
| Aquaflow™ NLS-220 | Ashland | Aquaflow™ NLS-220 is a solvent free nonionic synthetic associative thickener (NSAT) that provides efficient thickening (Stormer KU) and superior flow and leveling in waterborne coatings. It can be used with a wide variety of binder chemistries including v...展开 Aquaflow™ NLS-220 is a solvent free nonionic synthetic associative thickener (NSAT) that provides efficient thickening (Stormer KU) and superior flow and leveling in waterborne coatings. It can be used with a wide variety of binder chemistries including vinyl acrylics, ethylene vinyl acetates, alkyd emulsions and in particular pure acrylics and styrene acrylics. It rapidly equilibrates to target low- or mid-shear viscosity with no negative impact on gloss or color stability. 收起 | |
| Aquaflow™ NMS-450 | Ashland | Aquaflow™ NMS-450 is a solvent-free, non-ionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings. | |
| Aquaflow™ NMS-460E | Ashland | Aquaflow™ NMS-460E rheology modifier is a solvent-free, nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings. It is efficient in most latex systems and across all seen levels. It is designed to provide a balance of S...展开 Aquaflow™ NMS-460E rheology modifier is a solvent-free, nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings. It is efficient in most latex systems and across all seen levels. It is designed to provide a balance of Stormer (KU) viscosity along with high-shear (ICI) viscosity, and thus can be considered a mid-shear effective thickener that can function as the sole thickener in many paint formulation based on hydrophobic resins, such as acrylics and styrene acrylics. With more hydrophilic resins, such as vinyl acetate ethylene (VAE), optimized rheology may be achieved with Aquaflow™ NMS-460E rheology modifier alone or in combination with a supplemental KU driver. 收起 | |
| Aquaflow™ XLS-500 | Ashland | Aquaflow™ XLS-500 is non-ionic synthetic associative rheology modifier for low-VOC acrylic based paints & coatings. | |
| Aquaflow™ XLS-525 | Ashland | Aquaflow™ XLS-525 is a non-ionic synthetic associative rheology modifier for low-VOC paints and coatings. | |
| Aquaflow™ XLS-530 | Ashland | Aquaflow™ XLS-530 is a solvent-free, non-ionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings and is compatible with most latex resin systems. | |
| Crestacryl® 71-1030 | Scott Bader | Crestacryl® 71-1030 is an acrylic resin with excellent adhesion, vapour permeability and flexibilty. Used for high grade façade, wall and concrete paints and sealers. | |
| Crestacryl® 71-5060 | Scott Bader | Crestacryl® 71-5060 is a thermoplastic acrylic with excellent solvent release, elasticity and adhesion onto various metallic substrates. Also used for primers for metal and wood finishing. | |
| Crestacryl® 71-8026 | Scott Bader | Crestacryl® 71-8026 is used for high grade road marking paints with excellent solvent release. | |
| Crestacryl® 71-9044 | Scott Bader | Crestacryl® 71-9044 is used for high grade road marking paints with excellent solvent release. | |
| Crestacryl® 71-9076 | Scott Bader | Crestacryl® 71-9076 has very rapid solvent release and drive-over ability; resin has excellent hardness, very good elasticity and adhesion. It is a high grade road-marking paint. | |
| Crestacryl® 71-9078 | Scott Bader | Crestacryl® 71-9078 is a high quality thermoplastic acrylic resin, which gives rapid solvent release, very good elasticity, excellent adhesion on various metallic substrates and very good alkali and water resistance. It can be used as universal binder for...展开 Crestacryl® 71-9078 is a high quality thermoplastic acrylic resin, which gives rapid solvent release, very good elasticity, excellent adhesion on various metallic substrates and very good alkali and water resistance. It can be used as universal binder for metal paints, wood coatings, road marking paints, masonry paints and concrete. 收起 | |
| Crestakyd® 10-0504 | Scott Bader | Crestakyd® 10-0504 is a 100% solids alkyd for low VOC exterior paints and wood stains | |
| Crestakyd® 10-1019 | Scott Bader | Crestakyd® 10-1019 is a top quality gloss paints for both decorative and marine applications. | |
| Crestakyd® 10-1022 | Scott Bader | Crestakyd® 10-1022 is a standard top quality alkyd for use in decorative gloss paints. | |
| Crestakyd® 10-1025 | Scott Bader | Crestakyd® 10-1025 is used for economical gloss paints and primers. | |
| Crestakyd® 10-1066 | Scott Bader | Crestakyd® 10-1066 is an air drying alkyd that has excellent brushability and flow characteristics, as well as good gloss retention and weathering resistance. It can be used for economical decorative and do-it-yourself paints, including primers, topcoats,...展开 Crestakyd® 10-1066 is an air drying alkyd that has excellent brushability and flow characteristics, as well as good gloss retention and weathering resistance. It can be used for economical decorative and do-it-yourself paints, including primers, topcoats, and varnishes. 收起 | |
| Crestakyd® 10-2020 | Scott Bader | Crestakyd® 10-2020 is a standard long oil alkyd for use in decorative gloss paints. | |
| Crestakyd® 10-2023 | Scott Bader | Crestakyd® 10-2023 is suitable for high solids wood stains and varnishes giving excellent durability. | |
| Crestakyd® 10-2033 | Scott Bader | Crestakyd® 10-2033 is a fast drying alkyd with good flow characteristics. | |
| Crestakyd® 10-2505 | Scott Bader | Crestakyd® 10-2505 is suitable for high solids decorative paints and lacquers with excellent durability. | |
| Crestakyd® 10-3000 | Scott Bader | Crestakyd® 10-3000 is an air drying alkyd with excellent brushability & flow characteristics, as well as good gloss retention & weathering resistance for top quality gloss paints used in both decorative and marine applications. | |
| Crestakyd® 10-3507 | Scott Bader | Crestakyd® 10-3507 is a top quality alkyd for use in decorative gloss paints and varnishes. | |
| Crestakyd® 20-5024 | Scott Bader | Crestakyd® 20-5024 is used for air drying and low bake industrial finishes. | |
| Crestakyd® 20-5029 | Scott Bader | Crestakyd® 20-5029 is a chain stopped alkyd used for general industrial air drying finishes and machinery enamels. | |
| Crestakyd® 20-5036 | Scott Bader | Crestakyd® 20-5036 is a chain stopped alkyd used for general industrial air drying primers and enamels. | |
| Crestakyd® 20-9021 | Scott Bader | Crestakyd® 20-9021 is an economical chain stopped alkyd used for fast drying machinery enamels. | |
| Crestakyd® 20-9074 | Scott Bader | Crestakyd® 20-9074 is a rapid drying alkyd that has excellent gloss / weathering resistance and flow characteristics. It can be used for primers and other air-dry industrial finishes. | |
| Crestakyd® 20-9509 | Scott Bader | Crestakyd® 20-9509 is a wood finishing alkyd used for lower VOC coatings. | |
| Crestakyd® 30-5005 | Scott Bader | Crestakyd® 30-5005 is a quick drying short oil alkyd used for primers and top coats for metal and wood. | |
| Crestakyd® 30-5016 | Scott Bader | Crestakyd® 30-5016 is used for very quick drying industrial paints with good all round properties. | |
| Crestakyd® 30-5049 | Scott Bader | Crestakyd® 30-5049 is a short oil alkyd with excellent cold check properties, good wet heat resistance, good stackability and excellent all round properties. It has been designed for use in acid curing finishes for wood. | |
| Crestakyd® 30-5057 | Scott Bader | Crestakyd® 30-5057 is a fast drying short oil alkyd with excellent stability and cold check properties. It can be used for easy sanding NC sealers and NC finishes. | |
| Crestakyd® 30-5067 | Scott Bader | Crestakyd® 30-5067 is a fast drying short oil alkyd supplied in xylene for use in air dry and force dry primers and topcoats. Also used for marine paints. | |
| Crestakyd® 30-5068 | Scott Bader | Crestakyd® 30-5068 is a fast drying short oil alkyd for use in air-dry and force-dry primers and topcoats. It is recommended for use in air dry and force dry primers and topcoats in a variety of general industrial metal coating applications. | |
| Crestakyd® 30-5071 | Scott Bader | Crestakyd® 30-5071 exhibits rapid drying characteristics and fast hardness development. It has very good weather resistance, excellent film build and attractive gloss. It can be used for NC finishes, acid hardening finishes and in combination with low rea...展开 Crestakyd® 30-5071 exhibits rapid drying characteristics and fast hardness development. It has very good weather resistance, excellent film build and attractive gloss. It can be used for NC finishes, acid hardening finishes and in combination with low reactivity melamine resins for industrial stoving enamels and automotive finishes. 收起 | |
| Crestakyd® 30-9055 | Scott Bader | Crestakyd® 30-9055 is a wood finishing alkyd used in nitrocellulose primers and top coats. | |
| Crestakyd® 30-9502 | Scott Bader | Crestakyd® 30-9502 is a short oil alkyd for high solids top coats with good colour and drying properties. | |
| Crestakyd® 41-5009 | Scott Bader | Crestakyd® 41-5009 is a styrene modified alkyd used for hammer finishes and quick drying enamels. Also used in the marine industry for quick drying coatings. | |
| Crestakyd® 41-6010 | Scott Bader | Crestakyd® 41-6010 is a styrene modified alkyd used for quick drying enamels. | |
| Crestakyd® 44-5027 | Scott Bader | Crestakyd® 44-5027 is a rosin and phenolic modified alkyd with exceptional drying and excellent water, petrol and oil resistance. | |
| Crestakyd® 44-5043 | Scott Bader | Crestakyd® 44-5043 is a rosin and phenolic alkyd used for general purpose. Rosin and phenolic alkyd used for dry and excellent solvent release. | |
| Culminal™ C-types modified cellulose ethers | Ashland | Culminal C-types cellulose ethers (CE) are especially designed methylcellulose derivatives, straight or modified with organic and inorganic additives. These series have been developed to improve the application and strength properties of gypsum based plas...展开 Culminal C-types cellulose ethers (CE) are especially designed methylcellulose derivatives, straight or modified with organic and inorganic additives. These series have been developed to improve the application and strength properties of gypsum based plasters, fillers, adhesives and spackling compounds, cement and lime based plasters, tile cements and similar products. 收起 | |
| Dextrol™ OC-110 | Ashland | Dextrol™ OC-110 is the free-acid form of a nonyl phenol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and storage stability. | |
| Dextrol™ OC-15 | Ashland | Dextrol™ OC-15 is the free acid form of a nonyl phenol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and storage stability. | |
| Dextrol™ OC-180 | Ashland | 它是一种乙氧基化脂肪醇磷酸酯的中和态（钾盐）。它设计用于为水性乳胶漆改善光泽度和颜色接受性 | |
| Dextrol™ OC-180HS Phosphate Ester Surfactant | Ashland | Dextrol™ OC-180HS表面活性剂是乙氧基脂肪醇磷酸酯的中和（钠盐）形式。它设计用于改善光泽度和在水性乳胶漆中的色彩接受度。根据配方的不同特点，这款产品还可以用作有助于减少颜料凝絮的补充分散剂。除了在乳胶漆中使用，Dextrol™ OC-180HS表面活性剂还可以提供普遍着色特性，有助于分散和稳定颜料，从而改善水基油漆的色彩接受度。 | |
| Dextrol™ OC-50 | Ashland | Dextrol™ OC-50 is the neutralized (sodium salt) form of a nonyl phenol ethoxylated phosphate ester. It is designed to impart improved gloss and color acceptance in waterborne latex paints. | |
| Dextrol™ OC-60 | Ashland | Dextrol™ OC-60 is the free-acid form of a tridecyl alcohol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and storage stability. | |
| Dextrol™ OC-60EP | Ashland | Dextrol™ OC-60EP phosphate ester surfactant is the free acid form of a tridecyl alcohol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and stora...展开 Dextrol™ OC-60EP phosphate ester surfactant is the free acid form of a tridecyl alcohol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and storage stability. Dextrol OC-60EP surfactant can be neutralized using several organic or inorganic bases. Dextrol OC-60EP surfactant also imparts improved gloss and color acceptance in waterborne latex paints. 收起 | |
| Dextrol™ OC-70 | Ashland | Dextrol™ OC-70 is the free-acid form of a tridecyl alcohol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and storage stability. | |
| Dextrol™ OC-70EP | Ashland | Dextrol™ OC-70EP phosphate ester surfactant is the free acid form of a tridecyl alcohol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and stora...展开 Dextrol™ OC-70EP phosphate ester surfactant is the free acid form of a tridecyl alcohol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and storage stability. Dextrol OC-70EP phosphate ester surfactant can be neutralized by the user using a number of organic or inorganic bases. 收起 | |
| Drewplus* L-3500 Foam Control Agent | Ashland | Drewplus* L-3500 is a 100% active foam control agent for use in water-based coatings. Drewplus* L-3500 is particularly recommended to prevent and control micro foam in both clearand pigmented industrial coatings which are applied by air spray, airless spr...展开 Drewplus* L-3500 is a 100% active foam control agent for use in water-based coatings. Drewplus* L-3500 is particularly recommended to prevent and control micro foam in both clearand pigmented industrial coatings which are applied by air spray, airless spray, air mix or HVLP. It exhibits a superb balance between activity and compatibility and is formulated with new hydrophobic polymer based active ingredients. 收起 | |
| Drewplus™ L-3510 Foam Control Agent | Ashland | Drewplus* L-3510 is a 100% active foam control agent for use in water-based coatings. Drewplus* L-3510 foam control agent is particularly recommended for clear, non-pigmented industrial coatings. It exhibits a superb balance between activity and compatib...展开 Drewplus* L-3510 is a 100% active foam control agent for use in water-based coatings. Drewplus* L-3510 foam control agent is particularly recommended for clear, non-pigmented industrial coatings. It exhibits a superb balance between activity and compatibility and is formulated with new hydrophobic polymer based active ingredients. 收起 | |
| Drewplus™ TS-4384 Foam Control Agent | Ashland | Drewplus™ TS-4384 Foam Control Agent is a proprietary non-ionic formulation of silica derivatives, silicones and surface active agents for use in coatings and printing inks. This product is particularly recommended for wood coatings, semi-gloss, high-glos...展开 Drewplus™ TS-4384 Foam Control Agent is a proprietary non-ionic formulation of silica derivatives, silicones and surface active agents for use in coatings and printing inks. This product is particularly recommended for wood coatings, semi-gloss, high-gloss acrylic architectural paints, water- based parquet lacquers. Excellent results have also been obtained in acrylic anti- corrosive primers, flexographic printing inks and water-reducible alkyd based systems. Drewplus™ TS-4384 foam control agent is highly efficient and exhibits excellent persistency. 收起 | |
| Drewplus™ TS-4481 Foam Control Agent | Ashland | Drewplus™ TS-4481 Foam Control Agent is a non-ionic blend of silica derivatives, silicones and paraffinic oil. It is formulated for use in water-based coatings. It is a highly efficient foam control agent with fast performance, excellent persistence and c...展开 Drewplus™ TS-4481 Foam Control Agent is a non-ionic blend of silica derivatives, silicones and paraffinic oil. It is formulated for use in water-based coatings. It is a highly efficient foam control agent with fast performance, excellent persistence and compatibility. Since it functions as an air release agent it is particularly effective on microfoam in spray-applied industrial coatings. 收起 | |
| HELLUTEL™ HEC HR 1000 | Shandong Yiteng Chemical Limited Liability Company | HELLUTEL™ HEC HR 1000 is a light yellowish, odorless, and tasteless, non-ionic, water soluble hydroxy ethyl cellulose polymer powder. Viscosity measured at a concentration of 1% is 800-1500. HELLUTEL™ HEC is used as a thickening, water retaining, retardan...展开 HELLUTEL™ HEC HR 1000 is a light yellowish, odorless, and tasteless, non-ionic, water soluble hydroxy ethyl cellulose polymer powder. Viscosity measured at a concentration of 1% is 800-1500. HELLUTEL™ HEC is used as a thickening, water retaining, retardant, and stabilizing agent in a variety of applications including painting, construction, paper-making, cosmetics, ceramics, and oil. Applications range includes latex paint, polymer emulsifying, cement mortar, enameling, and more. 收起 | |
| HELLUTEL™ HEC HR 2000 | Shandong Yiteng Chemical Limited Liability Company | HELLUTEL™ HEC HR 2000 is a light yellowish, odorless, and tasteless, non-ionic, water soluble hydroxy ethyl cellulose polymer powder. Viscosity measured at a concentration of 1% is 1500-2500. HELLUTEL™ HEC is used as a thickening, water retaining, retarda...展开 HELLUTEL™ HEC HR 2000 is a light yellowish, odorless, and tasteless, non-ionic, water soluble hydroxy ethyl cellulose polymer powder. Viscosity measured at a concentration of 1% is 1500-2500. HELLUTEL™ HEC is used as a thickening, water retaining, retardant, and stabilizing agent in a variety of applications including painting, construction, paper-making, cosmetics, ceramics, and oil. Applications range includes latex paint, polymer emulsifying, cement mortar, enameling, and more. 收起 | |
| HELLUTEL™ HEC HR 3000 | Shandong Yiteng Chemical Limited Liability Company | HELLUTEL™ HEC HR 3000 is a light yellowish, odorless, and tasteless, non-ionic, water soluble hydroxy ethyl cellulose polymer powder. Viscosity measured at a concentration of 1% is 2600-3300. HELLUTEL™ HEC is used as a thickening, water retaining, retarda...展开 HELLUTEL™ HEC HR 3000 is a light yellowish, odorless, and tasteless, non-ionic, water soluble hydroxy ethyl cellulose polymer powder. Viscosity measured at a concentration of 1% is 2600-3300. HELLUTEL™ HEC is used as a thickening, water retaining, retardant, and stabilizing agent in a variety of applications including painting, construction, paper-making, cosmetics, ceramics, and oil. Applications range includes latex paint, polymer emulsifying, cement mortar, enameling, and more. 收起 | |
| HELLUTEL™ HEC HR 4000 | Shandong Yiteng Chemical Limited Liability Company | HELLUTEL™ HEC HR 4000 is a light yellowish, odorless, and tasteless, non-ionic, water soluble hydroxy ethyl cellulose polymer powder. Viscosity measured at a concentration of 1% is 3400-5000. HELLUTEL™ HEC is used as a thickening, water retaining, retarda...展开 HELLUTEL™ HEC HR 4000 is a light yellowish, odorless, and tasteless, non-ionic, water soluble hydroxy ethyl cellulose polymer powder. Viscosity measured at a concentration of 1% is 3400-5000. HELLUTEL™ HEC is used as a thickening, water retaining, retardant, and stabilizing agent in a variety of applications including painting, construction, paper-making, cosmetics, ceramics, and oil. Applications range includes latex paint, polymer emulsifying, cement mortar, enameling, and more. 收起 | |
| HELLUTEL™ HEC MR 2000 | Shandong Yiteng Chemical Limited Liability Company | HELLUTEL™ HEC MR 2000 is a light yellowish, odorless, and tasteless, non-ionic, water soluble hydroxy ethyl cellulose polymer powder. Viscosity measured at a concentration of 2% is 1500-2500. HELLUTEL™ HEC is used as a thickening, water retaining, retarda...展开 HELLUTEL™ HEC MR 2000 is a light yellowish, odorless, and tasteless, non-ionic, water soluble hydroxy ethyl cellulose polymer powder. Viscosity measured at a concentration of 2% is 1500-2500. HELLUTEL™ HEC is used as a thickening, water retaining, retardant, and stabilizing agent in a variety of applications including painting, construction, paper-making, cosmetics, ceramics, and oil. Applications range includes latex paint, polymer emulsifying, cement mortar, enameling, and more. 收起 | |
| HELLUTEL™ HEC MR 300 | Shandong Yiteng Chemical Limited Liability Company | HELLUTEL™ HEC MR 300 is a light yellowish, odorless, and tasteless, non-ionic, water soluble hydroxy ethyl cellulose polymer powder. Viscosity measured at a concentration of 2% is 150-400. HELLUTEL™ HEC is used as a thickening, water retaining, retardant,...展开 HELLUTEL™ HEC MR 300 is a light yellowish, odorless, and tasteless, non-ionic, water soluble hydroxy ethyl cellulose polymer powder. Viscosity measured at a concentration of 2% is 150-400. HELLUTEL™ HEC is used as a thickening, water retaining, retardant, and stabilizing agent in a variety of applications including painting, construction, paper-making, cosmetics, ceramics, and oil. Applications range includes latex paint, polymer emulsifying, cement mortar, enameling, and more. 收起 | |
| HELLUTEL™ HEC MR 5000 | Shandong Yiteng Chemical Limited Liability Company | HELLUTEL™ HEC MR 5000 is a light yellowish, odorless, and tasteless, non-ionic, water soluble hydroxy ethyl cellulose polymer powder. Viscosity measured at a concentration of 2% is 4500-6500. HELLUTEL™ HEC is used as a thickening, water retaining, retarda...展开 HELLUTEL™ HEC MR 5000 is a light yellowish, odorless, and tasteless, non-ionic, water soluble hydroxy ethyl cellulose polymer powder. Viscosity measured at a concentration of 2% is 4500-6500. HELLUTEL™ HEC is used as a thickening, water retaining, retardant, and stabilizing agent in a variety of applications including painting, construction, paper-making, cosmetics, ceramics, and oil. Applications range includes latex paint, polymer emulsifying, cement mortar, enameling, and more. 收起 | |
| Hydroxypropyl Starch Ether | Shandong Yiteng Chemical Limited Liability Company | Hydroxypropyl Starch Ether is a white (colorless) powder with good fluidity. It has good water solubility, when in an aqueous solution is transparent and colorless with good stability. This product finds application in a variety of industries including ad...展开 Hydroxypropyl Starch Ether is a white (colorless) powder with good fluidity. It has good water solubility, when in an aqueous solution is transparent and colorless with good stability. This product finds application in a variety of industries including adhesives, coating or organic liquids for building materials. 收起 | |
| K-CURE® 1040 | King Industries, Inc. | K-CURE® 1040 is a solution of para-Toluenesulfonic acid (p-TSA) in isoproanol, featuring high gloss, excellent weathering characteristics, outstanding exterior durability, and fast curing properties. Common applications include can, paper, and wood coatin...展开 K-CURE® 1040 is a solution of para-Toluenesulfonic acid (p-TSA) in isoproanol, featuring high gloss, excellent weathering characteristics, outstanding exterior durability, and fast curing properties. Common applications include can, paper, and wood coatings, appliance finishes, and printing inks. 收起 | |
| K-CURE® 1040W | King Industries, Inc. | K-CURE® 1040W is a good quality para-Toluenesulfonic acid (p-TSA) stimulant that is dissolved in water. Some advantages of this product include fast curing ability, good weather ability, it is non-flammable, high gloss, and it is integraded into water sys...展开 K-CURE® 1040W is a good quality para-Toluenesulfonic acid (p-TSA) stimulant that is dissolved in water. Some advantages of this product include fast curing ability, good weather ability, it is non-flammable, high gloss, and it is integraded into water systems. It is soluble in water, alcohol, and also glycols. This product can be applied to water based wood coatings, paper coatings, and printing inks. 收起 | |
| K-CURE® 129B | King Industries, Inc. | K-CURE® 129B is a strong acid stimulant supplied at 50% in a blend of alcohols. It is a strong acid stimulant that is made to give fast cures with good pot life in two component acid curing lacquers. K-CURE® 129B is not recommended to be used on metal sub...展开 K-CURE® 129B is a strong acid stimulant supplied at 50% in a blend of alcohols. It is a strong acid stimulant that is made to give fast cures with good pot life in two component acid curing lacquers. K-CURE® 129B is not recommended to be used on metal substrates because of its corrosive nature. This product offer fast curing, and high acid value which allows lower does levels. This is a product that is soluble in water, alcohol, and glycols. It can be applied to wood, paper, and plastic coatings. 收起 | |
| K-FLEX® 148 | King Industries, Inc. | K-FLEX® 148 is a highly reactive, aliphatic polyester polyol which is suggested for melamine or isocyanate crosslinked sealants, adhesives, inks, elastomers, and coatings for better flexibility, higher gloss, and improved flow out. It has a lower viscosit...展开 K-FLEX® 148 is a highly reactive, aliphatic polyester polyol which is suggested for melamine or isocyanate crosslinked sealants, adhesives, inks, elastomers, and coatings for better flexibility, higher gloss, and improved flow out. It has a lower viscosity to form higher solid content with good hardness and expanded flexibility. It appears as a clear, light straw liquid, offers good flow and leveling along with being 100% active. K-FLEX® 148 is soluble in ketones, alcohols, esters, Aromatic 100, Aromatic 150, and xylene. It is partially soluble in mineral spirits and is insoluble in water. It is normally applied in office furniture coatings, automotive primers, coil coatings, overprint varnishes, and general industrials. 收起 | |
| K-FLEX® 171-90 | King Industries, Inc. | K-FLEX® 171-90 is a highly reactive, aliphatic polyester polyol that is suggested for aminoplast or isocyanate crosslinked coatings, sealants, inks, elastomers, and adhesives. Although it is slower reacting in isocyanate crosslinked systems, it offers lon...展开 K-FLEX® 171-90 is a highly reactive, aliphatic polyester polyol that is suggested for aminoplast or isocyanate crosslinked coatings, sealants, inks, elastomers, and adhesives. Although it is slower reacting in isocyanate crosslinked systems, it offers long pot life, enhanced adhesion and flexibility. Because of its lower hydroxyl number, K-FLEX® 171-90 requires less crosslinker. K-FLEX® 171-90 can also be used as a modifier of aminoplast crosslinked coatings, inks and adhesives to enhance flexibility and adhesion. It appears as a clear, light straw liquid and offers high resistivity and low temperature cure. This product is soluble in esters, ketones, alcohols, aromatic 100 and aromatic 150, and xylene. It is partially soluble in mineral spirits and is insoluble in water. It can be used in office furniture coatings, 2K urethane coatings, appliance coatings, elastomeric coatings, coil coatings, and epoxy flexibilizer. 收起 | |
| K-FLEX® 188 | King Industries, Inc. | K-FLEX® 188 is a highly reactive, aliphatic polyester polyol which is suggested for aminoplast or isocyanate crosslinked coatings, adhesives, sealants, elastomers, and inks. Its uniform, narrow molecular weight distribution and unique chemical structure p...展开 K-FLEX® 188 is a highly reactive, aliphatic polyester polyol which is suggested for aminoplast or isocyanate crosslinked coatings, adhesives, sealants, elastomers, and inks. Its uniform, narrow molecular weight distribution and unique chemical structure produce exceptional and consistent performance and broad compatibility. K-FLEX® 188's primary hydroxyl groups also produce reactivity with epoxies in cationic thermal cure systems. This product is 100% active and offers, good flexibility, adhesion to plastics, and high resistivity. It appears as a clear, light straw liquid and is soluble in the aerospace, automotive refinish, and marine maintenance industries along with plastic substrates, overprint varnishes, glass laminates, and optical coatings. 收起 | |
| K-FLEX® 7301 | King Industries, Inc. | K-FLEX® 7301 is a reactive diluent with low viscosity and good compatibility with a variety of resins. It can be crosslinked with amino resins, polyisocyanates, polyamides, polyamines, unsaturated polymers, and is based on acetoacetate functionality. It i...展开 K-FLEX® 7301 is a reactive diluent with low viscosity and good compatibility with a variety of resins. It can be crosslinked with amino resins, polyisocyanates, polyamides, polyamines, unsaturated polymers, and is based on acetoacetate functionality. It is effective for both high solids and water-based applications for enhancing adhesion and corrosion resistance. This product appears as a clear amber liquid, terminates solvent popping/pinholes, and reduces induction time in epoxy/polyamide coatings. It is soluble in alcohols, ketones, esters, and aliphatic and aromatic hydrocarbons. It can be used in 2 component epoxy/ polyamide coatings, isocyanate crosslined coatings, and UV cure and oxidizing polymerization. 收起 | |
| K-FLEX® A307 | King Industries, Inc. | K-FLEX® A307 is a low viscosity, 100% solids linear, saturated, aliphatic polyester diol with primary hydroxyl groups. This product was created as a flexibility modifier for acrylic/isocyanate and acrylic/melamine systems. The low hydroxyl number minimize...展开 K-FLEX® A307 is a low viscosity, 100% solids linear, saturated, aliphatic polyester diol with primary hydroxyl groups. This product was created as a flexibility modifier for acrylic/isocyanate and acrylic/melamine systems. The low hydroxyl number minimizes the crosslinker demand. It offers improved flexibility, light color, abrasion resistance, good balance of surface dry and pot life in 2K PU, and no acid functionality. It appears as a clear viscous liquid and is soluble in esters, alcohols, xylene, ketones, aromatic 100, and aromatic 150. It is partially soluble in mineral spirits and is insoluble in water. It can be applied in automotive refinish, automotive OEM, industrial maintenance, aerospace, and plastic coatings. 收起 | |
| K-FLEX® A308 | King Industries, Inc. | K-FLEX® A308 is a 100% active linear, saturated, low viscosity, aliphatic polyester diol with essential hydroxyl groups. This product was created as a flexibility modifier for acrylic/isocyanate and acrylic/melamine systems. The low viscosity mixed togeth...展开 K-FLEX® A308 is a 100% active linear, saturated, low viscosity, aliphatic polyester diol with essential hydroxyl groups. This product was created as a flexibility modifier for acrylic/isocyanate and acrylic/melamine systems. The low viscosity mixed together with higher hydroxyl number gives good adhesion and hardness with lower VOC levels. K-FLEX® A308 appears as a offers enhanced flexibility, light color, a balance of surface dry/pot life in 2K PU, no acid functionality, and abrasion resistance. It is soluble in esters, alcohols, Aromatic 100, Aromatic 150, ketones, and xylene. It is partially soluble in mineral spirits and is insoluble in water. It can be applied in automotive refinish, automotive OEM, plastic coatings, industrial maintenance, and aerospace. 收起 | |
| K-FLEX® UD-320 | King Industries, Inc. | K-FLEX® UD-320 is an aliphatic, high solids, low molecular weight urethane diol oligomer. It is soluble in polar organic solvents except aliphatic and aromatic hydrocarbons. To gain aromatic solubility it has to be combined with a hydrogen bonding solvent...展开 K-FLEX® UD-320 is an aliphatic, high solids, low molecular weight urethane diol oligomer. It is soluble in polar organic solvents except aliphatic and aromatic hydrocarbons. To gain aromatic solubility it has to be combined with a hydrogen bonding solvent. This product has broad compatibility with acrylic, polyester, and alkyd resins. K-FLEX® UD-320 enhances the hardness of melamine crosslinked systems. When used to modify a 2-component polyurethane, it will enhance hardness and flexibility. K-FLEX® UD-320 responds best to a zirconium chelate catalyst when used in isocyanate crosslinked systems. It also offers benefits like low VOC, chemical resistance, exterior durability, QUV resistance, and hydrolytic stability. This product can be used for machine/equipment coatings, automotive coatings, appliance coatings, wood and paper coatings, and aerospace coatings. 收起 | |
| K-FLEX® UD-320-100 | King Industries, Inc. | K-FLEX® UD-320-100 is a low molecular weight, aliphatic urethane diol oligomer, supplied at 100% solids. It is suggested to be used as a chemical intermediate for prepolymer synthesis and allows the incorporation of aliphatic urethane groups without the u...展开 K-FLEX® UD-320-100 is a low molecular weight, aliphatic urethane diol oligomer, supplied at 100% solids. It is suggested to be used as a chemical intermediate for prepolymer synthesis and allows the incorporation of aliphatic urethane groups without the use of isocyanates. It appears as a viscous clear liquid and offers a low VOC, enhanced hardness, exterior durability, hydrolytic stability, QUV resistance, and is solvent and isocyanate free. This product is soluble in almost all organic solvents excluding aliphatic and aromatic hydrocarbons. The only was to get aromatic solubility is to combine it with a hydrogen bonding solvent. K-FLEX® UD-320-100 can be applied in industries like paper, automotive, wood, leather, and screen printing ink. 收起 | |
| K-FLEX® UD-350W | King Industries, Inc. | K-FLEX® UD-350W is a water-based solution of an aliphatic, low molecular weight urethane diol oligomer. It is suggested to be used as a modifier for amino crosslinked water soluble, emulsified acrylic, alkyd, urethane, and polyester resins. K-FLEX® UD-350...展开 K-FLEX® UD-350W is a water-based solution of an aliphatic, low molecular weight urethane diol oligomer. It is suggested to be used as a modifier for amino crosslinked water soluble, emulsified acrylic, alkyd, urethane, and polyester resins. K-FLEX® UD-350W can be used as a reactive cosolvent replacement to enhance crosslink density, solids, film/resistance properties, and flow/leveling. It appears as a straw colored liquid and offers low VOC, water solubility, hardness, chemical resistance, hydrolytic stability, QUV resistance, and exterior durability. This is a product that is not soluble in aromatic and aliphatic hydrocarbons. It can used in making, coil coatings, wood coatings, can coatings, dip coatings, appliance coatings, automotive coatings, and overprint varnishes. 收起 | |
| K-FLEX® XM-3307 | King Industries, Inc. | K-FLEX® XM-3307 is a carboxyl and hydroxyl functional polyester-urethane polyol. It is made to be a dispersing resin for pigments that are organic or inorganic.. It has to be neutralized with an amine to give good dispersing qualities. This product appear...展开 K-FLEX® XM-3307 is a carboxyl and hydroxyl functional polyester-urethane polyol. It is made to be a dispersing resin for pigments that are organic or inorganic.. It has to be neutralized with an amine to give good dispersing qualities. This product appears as a viscous liquid and offers fast dispersion time, high pigment loading, and high pigment transparency. It is soluble in ketones, alcohols, esters, aromatic hydrocarbons, and is not soluble in aliphatic hydrocarbons. It can be soluble in water if it is neutralized with an organic amine. K-FLEX® XM-3307 can also be applied in water-based coatings, solvent-based coatings, and can be used as an intercoat adhesion promoter. 收起 | |
| K-FLEX® XM-332 | King Industries, Inc. | K-FLEX® XM-332 is a low viscosity polyester polyol modifier resin that provides enhanced flexibility in solvent-borne, high solids, and solventless systems. It is recommended for use in air dry/force dry 2-component polyurethanes and blocked isocyanate sy...展开 K-FLEX® XM-332 is a low viscosity polyester polyol modifier resin that provides enhanced flexibility in solvent-borne, high solids, and solventless systems. It is recommended for use in air dry/force dry 2-component polyurethanes and blocked isocyanate systems. It appears as a light colored liquid, is 100% active, and offers good flexibility and hydrolytic stability. This product is soluble in aromatics and polar organic solvents like ketones, alcohols, glycols, esters, and glycol ethers. Two things that it is not soluble in are aliphatics and water. K-FLEX® XM-332 can be applied in structural adhesives, thermoplastic urethanes, plastic coatings, cast elastomer prepolymers, and automotive topcoats and OEM coatings. 收起 | |
| K-FLEX® XM-337 | King Industries, Inc. | K-FLEX® XM-337 is an aliphatic saturated polyester diol modifier resin created to implement increased toughness and chemical resistance for solvent borne and high solids systems. It is recommended for use in 1 and 2 component polyurethanes, and blocked is...展开 K-FLEX® XM-337 is an aliphatic saturated polyester diol modifier resin created to implement increased toughness and chemical resistance for solvent borne and high solids systems. It is recommended for use in 1 and 2 component polyurethanes, and blocked isocyanate systems. This product offers low color, UV durability, high hardness, high impact resistance, abrasion resistance and overall increased toughness. It appears as a clear liquid and is soluble in a lot of polar organic solvents such as glycols, alcohols, esters, ketones, aromatics, glycol ethers, and is not soluble in water and aliphatics. 收起 | |
| K-FLEX® XM-359 | King Industries, Inc. | K-FLEX® XM-359 is created to provide long pot life in 2K polyurethanes and to avoid yellowing resulting from interaction with benzotriazole (BZT) UV absorbers in clearcoat systems. K-FLEX® XM-359 is a saturated, aliphatic resin modifier. It provides a goo...展开 K-FLEX® XM-359 is created to provide long pot life in 2K polyurethanes and to avoid yellowing resulting from interaction with benzotriazole (BZT) UV absorbers in clearcoat systems. K-FLEX® XM-359 is a saturated, aliphatic resin modifier. It provides a good balance of flexibility with hardness, good exterior durability plus great solubility in many different solvents including exempt solvents. It appears as a clear, light straw liquid and provides optical clarity and low color along with good compatibility. This product is soluble in esters, ketones, alcohols, aromatic 100, aromatic 150, xylene, t-butyl acetate, and Oxsol 100. It is partially soluble in mineral spirits, and insoluble in water. It is applied in plastic coatings, optically clear coatings, elastomers and laminates. 收起 | |
| K-FLEX® XM-360 | King Industries, Inc. | K-FLEX® XM-360 is made to produce long pot life in 2K polyurethanes and to prevent yellowing resulting from interaction with benzotriazole (BZT) UV absorbers. K-FLEX® XM-360 is a saturated, aliphatic resin modifier. It gives a good balance of flexibility ...展开 K-FLEX® XM-360 is made to produce long pot life in 2K polyurethanes and to prevent yellowing resulting from interaction with benzotriazole (BZT) UV absorbers. K-FLEX® XM-360 is a saturated, aliphatic resin modifier. It gives a good balance of flexibility with hardness, excellent exterior durability plus excellent solubility in many different solvents. This product offers good compatibility and solubility, optical clarity and low color, and it is 100% active. It appears as a light straw liquid and is soluble in ketones, aromatics, alcohols, glycols, glycol ethers, esters, and is insoluble in water. It can be applied in the aerospace industry, automotive refinishes, plastic coatings, marine maintenance, and optically clear coatings, elastomers, and laminates. 收起 | |
| K-FLEX® XM-366 | King Industries, Inc. | K-FLEX® XM-366 is a low viscosity, 100% active, saturated, aliphatic polyester diol with primary hydroxyl groups. This product was made for use as a resin modifier of acrylic/isocyanate and acrylic/melamine systems to expand flexibility and decline VOC. I...展开 K-FLEX® XM-366 is a low viscosity, 100% active, saturated, aliphatic polyester diol with primary hydroxyl groups. This product was made for use as a resin modifier of acrylic/isocyanate and acrylic/melamine systems to expand flexibility and decline VOC. It appears as a clear liquid that is light in color and offers good compatibility and solubility. This product is soluble in glycols, glycol ethers, alcohols, esters, aromatics, ketones, and is insoluble in aliphatic hydrocarbons and water. It can be applied in plastic coatings, aerospace, automotive OEM & refinishes, and VOC compliant systems. 收起 | |
| K-FLEX® XM-B301 | King Industries, Inc. | K-FLEX® XM-B301 is a low viscosity, acetoacetate functional reactive diluent that is compatible with variety of resins. It is mainly suggested to be used in epoxy/polyamide primers, but can also be used in systems crosslinked with amino resins or polyisoc...展开 K-FLEX® XM-B301 is a low viscosity, acetoacetate functional reactive diluent that is compatible with variety of resins. It is mainly suggested to be used in epoxy/polyamide primers, but can also be used in systems crosslinked with amino resins or polyisocyanates. This product appears as a clear amber liquid and offers reduced induction time, adhesion, corrosion resistance, viscosity reduction, and elimates solvent popping and pinholes. It is soluble in esters, alcohols, aromatics, and ketones. It is insoluble in aliphatic hydrocarbons and water. K-FLEX® XM-B301 can be applied in epoxy-polyamide primers for industries like aerospace, automotive, marine, truck/bus/rail, and industrial maintenance. 收起 | |
| K-KAT® 348 | King Industries, Inc. | K-KAT® 348 is an adaptable bismuth carboxylate stimulant that is made for blocked isocyanate and two standard urethane coatings. It can provide similar characteristics to basic tin catalysts without the environmental setbacks. This product appears as a cl...展开 K-KAT® 348 is an adaptable bismuth carboxylate stimulant that is made for blocked isocyanate and two standard urethane coatings. It can provide similar characteristics to basic tin catalysts without the environmental setbacks. This product appears as a clear, straw liquid and offers great catalysis of secondary hydroxyls, gloss retention, exterior durability, and the ability to be used in ambient, force dry, and bake systems. It is soluble in glycol ethers, aliphatics, and aromatics. It is limited in solubility in alcohols and esters and is insoluble in water. K-KAT® 348 can be applied in 2K and blocked isocyanate coatings, urethane elastomers, foams and coatings, and cationic coatings. 收起 | |
| K-KAT® 4205 | King Industries, Inc. | K-KAT® 4205 is a zirconium chelate complex that is an effective stimulant for high solids 2-integral urethane coatings. It is effective for ambient and low temperature cure systems. This product appears as a clear, colorless liquid and offers fast tack fr...展开 K-KAT® 4205 is a zirconium chelate complex that is an effective stimulant for high solids 2-integral urethane coatings. It is effective for ambient and low temperature cure systems. This product appears as a clear, colorless liquid and offers fast tack free time along with good viscosity stability. It is effective at low metal concentrations and also effective with a mix of isocyanates and polycols. K-KAT® 4205 is soluble in ketones, aromatic hydrocarbons, and esters. It can be applied to automotive topcoats, maintenance coatings, structural plastics coatings, and aerospace coatings. 收起 | |
| K-KAT® 5218 | King Industries, Inc. | K-KAT® 5218 is an aluminum chelate complex stimulant for 2 basic urethane coatings. It is effective for both ambient cure and baked systems. K-KAT® 5218 is supplied in a reactive diluent for high solids applications. It offers pot life extension with the ...展开 K-KAT® 5218 is an aluminum chelate complex stimulant for 2 basic urethane coatings. It is effective for both ambient cure and baked systems. K-KAT® 5218 is supplied in a reactive diluent for high solids applications. It offers pot life extension with the addition of 2,4-pentanedione, fast tack free time, exterior durability, and is effective with a variety of isocyanates and polyols. It appears as a slightly hazy, amber liquid and can be applied in automotive topcoats, aerospace coatings, maintenance coatings, and coatings for structural plastics. This product is soluble in ketones, esters, glycol ethers, alcohols, and aromatic hydrocarbons. 收起 | |
| K-KAT® 6212 | King Industries, Inc. | K-KAT® 6212 appears as a clear, straw liquid and is an effective stimulant when isocyanate and hydroxyl groups react with each other. It is a zirconium chelate complex dissolved in a reactive diluent. It offers good cure response and exterior durability a...展开 K-KAT® 6212 appears as a clear, straw liquid and is an effective stimulant when isocyanate and hydroxyl groups react with each other. It is a zirconium chelate complex dissolved in a reactive diluent. It offers good cure response and exterior durability along with a short tack free time. This product doesn't add to the hydrolysis of polyester resins and high selectivity for NCO/OH reactions over NCO/water reaction. It is soluble in esters, alcohols, ketones, aliphatic and aromatic hydrocarbons, glycol ethers, and glycol ether acetates. It is only partially soluble in water. It can be applied to adhesives, polyurethane coatings, casting resins and polyurethane resin synthesis, RIM, and water-based two component coatings. 收起 | |
| K-KAT® 670 | King Industries, Inc. | K-KAT® 670 is a novel non-tin stimulant for products containing crosslinkable silane terminated polymers. It appears as a light amber liquid and is soluble in esters, ketones, aromatic hydrocarbons, alcohols, and is insoluble in water. This product can be...展开 K-KAT® 670 is a novel non-tin stimulant for products containing crosslinkable silane terminated polymers. It appears as a light amber liquid and is soluble in esters, ketones, aromatic hydrocarbons, alcohols, and is insoluble in water. This product can be applied in ambient cured 1 component organosilane and 2 component organosilane hybrid coatings, caulks, adhesives, elastomers, and sealants. 收起 | |
| K-KAT® XC-B221 | King Industries, Inc. | K-KAT® XC-B221 is an experimental bismuth carboxylate stimulant that is made for blocked isocyanate and two basic urethane coatings. It is a bismuth stimulant that can contribute similar qualities to standard tin stimulants without the environmental drawb...展开 K-KAT® XC-B221 is an experimental bismuth carboxylate stimulant that is made for blocked isocyanate and two basic urethane coatings. It is a bismuth stimulant that can contribute similar qualities to standard tin stimulants without the environmental drawbacks. This product offers good glass retention, exterior durability, and the ability to be used in ambient, force dry, and bake systems. K-KAT® XC-B221 is soluble in butanol, ethanol, methanol, isopropanol, glycol ethers, glycol ether acetates, aliphatic and aromatic hydrocarbons, and is insoluble in water. This product appears as a clear, straw liquid and can be applied in 2K, blocked isocyanate coatings, urethane elastomers, foams, coatings, and cationic electro-coatings. 收起 | |
| K-KAT® XK-614 | King Industries, Inc. | K-KAT® XK-614 is a non-tin stimulant that is suggested to be applied in 2-component solvent-borne, 2-component waterborne polyurethanes, and also for 1-component blocked isocyanate systems. It is easy to add to the polyol components and offers good curing...展开 K-KAT® XK-614 is a non-tin stimulant that is suggested to be applied in 2-component solvent-borne, 2-component waterborne polyurethanes, and also for 1-component blocked isocyanate systems. It is easy to add to the polyol components and offers good curing time qualities. It also has good hydrolytic stability and exterior durability. This product has non-yellowing ability and great gloss retention characteristics. It appears as a light, yellow liquid, is soluble in alcohols, and is insoluble in water. 收起 | |
| K-KAT® XK-617 | King Industries, Inc. | K-KAT® XK-617 is an effective stimulant when isocyanates and polyols used in the production of cast elastomers react with each other. It is a proprietary blended organometallic complex specifically formulated to be a substitute to mercury stimulant withou...展开 K-KAT® XK-617 is an effective stimulant when isocyanates and polyols used in the production of cast elastomers react with each other. It is a proprietary blended organometallic complex specifically formulated to be a substitute to mercury stimulant without the concern of toxicity. It appears as a pale, light amber liquid, offers good cure response, and is environmentally more acceptable. This product is soluble in glycol ethers, n-butanol, ketones, aliphatics. aromatics, and is partially soluble in water. It is normally applied in 2K urethanes for cast elastomers. 收起 | |
| K-KAT® XK-628 | King Industries, Inc. | K-KAT® XK-628 is an adaptable bismuth carboxylate stimulant that is made for blocked isocyanate and two fundamental urethane coatings. It can provide similar characteristics to basic tin stimulants without the environmental drawbacks. K-KAT® XK-628 appear...展开 K-KAT® XK-628 is an adaptable bismuth carboxylate stimulant that is made for blocked isocyanate and two fundamental urethane coatings. It can provide similar characteristics to basic tin stimulants without the environmental drawbacks. K-KAT® XK-628 appears as a clear, amber liquid and is a made to give enhanced hydrolytic stability. This product offers good exterior ability, gloss retention, and the ability to be used in ambient, force dry, and bake systems. It is soluble in glycol ethers, aliphatics, and aromatics. It is partially soluble in alcohols, esters, and is insoluble in water. This product can be applied in 2K and blocked isocyanate coatings, urethane elastomers, foams, and coatings. 收起 | |
| K-KAT® XK-635 | King Industries, Inc. | K-KAT® XK-635 is a new non-tin stimulant suggested for solvent based or solvent free 2-component polyurethanes and 1-component blocked isocyanate systems. This product appears as a light, yellow liquid and offers good pot life in 2K PU systems, good cure ...展开 K-KAT® XK-635 is a new non-tin stimulant suggested for solvent based or solvent free 2-component polyurethanes and 1-component blocked isocyanate systems. This product appears as a light, yellow liquid and offers good pot life in 2K PU systems, good cure time, non-yellowing, and gloss retention. It is soluble in esters, aromatic hydrocarbons, and ketones. It is insoluble in water. This product is 100% active, weighs 9.5 lbs per gallon, and has a specific gravity of 1.14 g/ml. 收起 |
