UL Prospector
Prospector
Company: Shandong Yiteng Chemical Limited Liability Company  Company: King Industries, Inc.  Company: Evonik Operations GmbH, BL Crosslinkers  Company: BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料  Clear All 

成功!

成功保存搜索结果
625 条结果
Acronal® 296 D ap BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 阴离子乳液聚合物，粘度中等。它含有细小、良好分散的颗粒。它与颜填料具有出色的相容性。对颜料具有非常高的粘合力。未着色的Acronal®296 D apare涂膜透明、柔韧、高光泽，具有极高的耐水性和非常好的耐皂化性能
Acronal® 296 DS ap BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 高品质、通用型建筑涂料用乳液聚合物。Acronal® 296 DS ap是一种阴离子型低粘度的乳液聚合物，它由细小的微粒组成。与颜填料有出色的兼容性，具备超强的颜料粘结力。Acronal® 296 DS ap乳液膜在室温下不粘手。Acronal® 296 DS ap乳液膜透明，柔软且有光泽，具有极好的耐水性，且具备出色的耐皂化特性。
Acronal® 7015 BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 一种具有中等黏度的细微分散乳液聚合物。它是一种拥有与常用填料及添加物良好兼容性的丙烯酸乳液，同时其对填料有着很好的粘结力。其在20℃左右可形成具有高硬度、高弹性以及很好的抗黏连性特点的膜.Acronal® 7015形成的膜具有优异的耐水性和耐光性，同时对于皂化和风化有着很好的抗性。它有着良好的耐水白性，即使在水中浸泡很长时间变白后仍能回复。
Acronal® 7016 G BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 一种阴离子型中等粘度的乳液聚合物。它由细小的微粒组成，是一种拥有优异户外耐久性和耐沾污性的纯丙烯酸共聚物。能使涂膜拥有良好的耐擦洗性、抗粘连性、对混凝土表面有良好的附着力。
Acronal® 7026 BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 良好分散的的聚合物乳液，粘度低。该乳液形成的涂膜在很宽的温度范围内具有高弹性，尤其是在寒冷气候环境下。与填料和颜料具有出色的相容性。它具有非常高的颜料粘合力。用Acronal®7026形成的涂膜具有出色的耐水、耐碱性能和耐风化性能。Acronal®7026配制的弹性墙面涂料具有良好的耐毛细裂纹，由于采用了紫外表面交联技术，即使在温暖高污染的环境下也具有非常好的耐玷污性能
Acronal® 7026 G BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 一种细小粒径的低粘度乳液聚合物。这种乳液膜在各种温度条件下，特别是在气候寒冷地区都能保持良好弹性。它与颜填料相容性非常好，具有很强的颜填料的承载能力。Acronal® 7026 G 形成的涂膜具有优异的耐水、耐碱和抗风化性能。其配制的弹性墙面漆具有细微裂纹桥接功能，同时由于运用了紫外光表面交联技术，即便在热的天气和污染严重的环境中也表现出很强的耐沾污性能。
Acronal® 7035 BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 耐擦洗性能优异的高PVC内墙涂料用乳液聚合物 Acronal®7035是不含APEO的低粘度阴离子乳液.它由细小的乳液粒子组成. Acronal®7035具有很高的对颜填料的粘结力，因此它即使在很高PVC时仍然 使得涂料具有突出的耐擦洗性
Acronal® 7035 G BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 耐擦洗性能优异的高PVC内墙涂料用乳液聚合物。Acronal®7035G是不含APEO的低粘度阴离子乳液.它由细小的乳液粒子组成。Acronal®7035G具有很高的对颜填料的粘结力，因此它即使在很高PVC时仍然使得涂料具有突出的耐擦洗性
Acronal® 7037 BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 具有极佳耐擦洗性多功能内墙建筑涂料用乳液聚合物,Acronal® 7037是一种不含APEO的低黏度阴离子乳液聚合物。它由细小的乳液粒子组成。Acronal® 7037 具有很高的对颜填料的粘结力，因此它即使在很高PVC时仍然使得涂料具有突出的耐擦洗性。
Acronal® 7051 BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 适用于真石漆和质感涂料的水性聚合物乳液 Acronal®7051是一种具有中等黏度的细微分散乳液聚合物。它是一种与常用颜料及骨料具有良好相容性的纯丙烯酸乳液，同时其具有优异的钙离子稳定性。其涂膜坚韧，具有柔性及抗粘连性。Acronal® 7051形成的膜具高耐水性、耐光性，优异的抗皂化性及耐候性。即使在水中长时间浸泡，涂膜也不会水白。
Acronal® A 684 BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 通用型，具有出色的附着力和出色的耐候性
Acronal® CN 18 ap BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 不含甲醛、中等黏度、细小粒径的乳液聚合物。与颜填料有出色的兼容性。聚合物乳液干膜透明，柔软有光泽，杰出的耐水和抗皂化性能。
Acronal® DS 6266 ap BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 可广泛用于各种乳胶漆和质感面漆的聚合物乳液 Acronal®DS 6266 ap 是一种中等粘度的阴离子型聚合物乳液。它拥有极细的 粒径，能形成无色、透明滑爽的涂膜。产品性能优异，具有良好的抗发白性、低吸水性和高耐候性。
Acronal® ECO 338 AP BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 是一种细粒径，低黏度的水性乳液。无气味，而且不包含氨水，溶剂及增塑剂。它与常用的颜料与填料展现优异的相容性。形成的涂膜透明，柔性且有光泽，并具备好的耐水性及耐水解性。
Acronal® ECO 502 AP BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 是低黏度，细小乳胶，无气味，不含氨水及任何溶剂或增塑剂，拥有出色的颜料相容性和粘结能力，而且配方内不需要助成膜助剂。其干膜透明，有光泽和弹性，并有很好的耐水和抗水解性能。
Acronal® ECO 612 AP BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 全丙烯酸共聚物，用于低光泽建筑涂料。用Acronal®ECO 612 ap形成的涂料能在保持VOC含量接近零的条件下满足严苛性能。由于其出色的附着力和抗粘连性能，Acronal®ECO 612 ap配制的涂料非常适合各种表面类型和应用。另外，Acronal®ECO 612 ap表现出优秀的耐常规家庭污染物的能力
Acronal® ECO 702 AP BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 是一种阴离子型中等黏度，细小粒径的水性乳胶。拥有优异的颜料和填料的相容性与粘结性能。Acronal ECO 702 ap 在无颜填料时形成的膜透明，有弹性和光泽，并具有出色的耐水和抗皂化性能。
Acronal® ECO 7078 BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 耐沾污性能出众的乳液聚合物。（依据 GB/T 9780 建筑涂料涂层耐沾污性试验方法）Acronal® ECO 7078 粒径细，粘度低， 无气味且不含氨、溶剂和增塑剂。 在常用的内墙涂料配方中，表现出优秀的耐沾污性与耐湿擦洗性。
Acronal® ECO 9056 AP BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 阴离子乳液聚合物，具有中等粘度。它含有细小良好分散的颗粒。它与颜料和填料具有出色的相容性。它具有非常高的颜料粘合力。未着色的Acronal®ECO 9056涂膜可在室温下指干。Acronal®ECO 9056的涂膜透明、柔韧和高光，具有极高的耐水性和非常好的耐皂化性能
Acronal® Flex SC 138 AP BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 良好分散的聚合物乳液，粘度低。与填料和颜料具有出色的相容性。它具有非常高的颜料粘合力。用Acronal®FLEX SC 138形成的涂膜具有出色的耐水、耐碱性能和耐候性。Acronal®FLEX SC 138配制的弹性墙面涂料即使在温暖高污染的环境下也具有良好的耐毛细裂纹以及非常好的耐玷污性能
Acronal® GS 409 AP BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 是一种低粘度细小粒径聚合物乳液。它与填料和颜料具有优异的相容性，同时具有极高的颜料粘结力。由Acronal GS 409 ap形成的漆膜具有优异的耐水性、耐碱性和耐候性。采用Acronal GS 409 ap配制的弹性涂料能能够提供毛细裂纹的桥接，即使在温暖和污染的环境中，也具有非常出色的耐沾污性。
Acronal® IA734 ap BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 Acronal® IA734 ap是一种直链丙烯酸阴离子乳液聚合物，专门设计用于顶级户外应用。聚合物细而窄的粒径分布确保了良好的附着力。交联作用使它获得最好的机械性能而无需牺牲耐沾污性。它不含增塑剂和溶剂
Acronal® JC 7043 X BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 是一种拥有细小粒径和低粘度的阴离子R-C乳液。它是一 种长链的丙烯酸和苯乙烯共聚物，具备优异的对粉化基材的渗透性和优异的耐碱性，适用于水性渗透性和耐碱性底漆，该底漆可替代溶剂型体系。该产品对粉化砖石基材具有优异的粘结力。 Acronal® JC 7043 适用于制备全效合一水性底漆产品。
Acronal® LR8977 BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 安固力® LR8977是一种自交联丙烯酸乳液，用于工业金属防护涂料。很好的抗压粘性。适用高PVC配方。不含APEO，与防锈颜料相容性好，具有优异的金属防护性能
Acronal® NX 3587 BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 Acronal® NX 3587是一种水性丙烯酸乳液，用于弹性屋顶涂料。它是一种BASF新设计的聚合物，解决了弹性屋顶涂料工业的许多顾虑。首先，它是一种含可交联官能团的纯丙烯酸聚合物，这不仅仅提高的聚合物的抗张强度，而且改善了基材的附着力尤其是在聚氨酯上。其次，Acronal® NX 3587解决了当作为白色涂料遮盖沥青基材时的耐沥青渗出问题。根据紫外和热(50°C) 条件下的测试，它显示几乎没有沥青渗出。最后，当该产品复合到典型的42 PVC弹性屋顶涂料配方中时，它显示了非常低的吸水值
Acronal® PA 510 BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 是一种阴离子型的分散介质的粘度。该乳液具有非常细的颗粒，提供优良的增稠响应。 ACRONAL®PA510配方的高光泽涂料耐高挡。 ACRONAL®PA510具有优异的湿附着力对木材和任何关键基材，尤其是老化醇酸的基材.
Acronal® PA 619 ap BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 Acronal®PA 619 ap为水性丙烯酸乳液，用于改性水硬性胶黏剂。它被推荐用于砂浆修补或喷涂应用。本产品所配制的混合物在高温下或多种类型水泥时均表现出优异的开罐可使用时间，夹带空气少，它可提供卓越的冷冻/解冻稳定性。 ACRONAL®PA 619 ap也建议用于水泥基瓷砖薄集胶粘剂，改性砂浆和水泥修复系统。相比未改性砂浆混合物，使用本产品改性的砂浆混合物具有更好的抗弯，抗拉强度和耐水渗透性。
Acronal® PA 807 ap BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 乳液聚合物，耐久、低粘灰，用于高品质户外乳胶漆。Acronal® PA 807 ap是一种阴离子乳液聚合物，粘度中等，含有细小、良好分散的颗粒。它是一种全丙烯酸共聚物具有出色的户外耐久性和良好的耐玷污性能。该聚合物制备的涂膜具有良好的耐擦洗性能，防粘连性能，良好的对圬工表面的附着力以及特别好的湿遮盖力。Acronal® PA 807 ap适合用于制备各种应用的油漆，可配制不同光泽水平。
Acronal® PLUS 7045 BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 低环境影响型抗菌内墙涂料用聚合物乳液 Acronal® PLUS 7045 是一种低气味、非渗出型抗菌涂料用乳液。Acronal® PLUS 7045 使用了特殊的聚合物载体，将银离子牢牢锁住，从而使其既具有优异的抗菌性能，又不会渗出衰减，同时不会导致涂料变灰。该乳液干燥后可以形成透明的高光涂膜，具有优异的耐水性及抗风化性能
Acronal® PLUS 7048 BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 Acronal® PLUS 7048是一种无气味的阴离子乳液聚合物，可提供去甲醛功能，适用于户内墙面涂料。它含特殊单体可帮助捕获室内房间里的游离甲醛。从它制备的涂膜清澈高光，具有出色的耐水和耐风化性能
Acronal® PLUS 7048G BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 Acronal® PLUS 7048G 是一种用于内墙抗甲醛涂料的低气味聚 合物乳液。Acronal® PLUS 7048G 采用了特殊的功能性单体，它能够帮助捕获室内空气中的游离甲醛。该乳液干燥后可以形成 透明的高光涂膜，具有优异的耐水性及抗风化性能。
Acronal® PRO80 BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 安固力® PRO80 是一种不含APEO，不含锌的丙烯酸乳液。具有非常好的防护性能和对湿热的屏蔽性。早期耐水性好，对各种颜填料的润湿性好。推荐用于金属底漆，中涂或面漆
Acronal® PS 608 ap BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 Acronal®PS608 ap为水性丙烯酸乳液，用于水硬性胶结剂的改性。它用来改性水硬性胶结剂，尤其是含有水泥的混合物。用本产品改性的化合物具有非常好的流体均一性，允许大大减少用水量，而不改变最终产品的性能。可看到弯曲强度显著增加。 ACRONAL®PS608 ap推荐用于制造修补砂浆，工业地坪找平，finescreeds，以及水泥基自流平化合物。
Acronal® PS 673 ap BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 Acronal®PS 673 ap为阴离子乳液聚合物，具有中等粘度。它含有小而细碎的颗粒。它与颜料和填料的相容性非常好，而且对颜料具有很高的粘结力。通过加入Acronal®PS 673 ap形成的膜是透明的，柔韧的，有光泽的，它们具有极高的防水性，并且具有非常好的耐皂化性能。本产品的未着色膜可在室温下表干。
Acronal® PS 707 ap BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 阴离子乳液聚合物，具有中等粘度。它含有细小良好溶解的无机盐。它的未着色涂膜光亮、透明、柔韧，具有耐水性和耐皂化性能
Acronal® PS 713 ap BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 ACRONAL®PS 713 ap是一种水性丙烯酸乳液，适合高品质胶黏水泥应用。它是一种高度通用的水性丙烯酸乳液，适合于不同的防水应用，并且对各种表面具有很高的附着力。它是一个功能强大的产品，它可提供高颜料粘合力，并具有高剪切力下非常好的稳定性。它可以被添加到研磨料中配制非常高固含量的涂料，制备厚膜。 ACRONAL®PS 713 ap被广泛应用于建筑行业，尤其是胶黏水泥防水。
Acronal® PS 715 ap BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 Acronal®PS 715 ap为水性丙烯酸乳液，用于胶黏水泥和抗碳化涂层。它是高性能胶黏水泥防水膜用的合适基料。由于它的弹性和优良的抗裂-桥接性能，它赋予了建筑物长期耐久性。基于此产品的胶黏水泥防水膜对各种基材具有良好的附着力和非常好的耐玷污性能。它可理想地用于外墙防水应用，以保护建筑物，防止漏水和来自天气的影响。
Acronal® PS 719 AP BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 Acronal®PS 719 ap是一种阴离子型乳液聚合物，粘度中等。它含有细小的良好分散的颗粒。它与颜料和填料具有出色的相容性。它具有非常高的颜料粘合力。未着色的Acronal®PS 719涂膜可在室温下指干。Acronal®PS 719的涂膜透明、柔韧和高光，具有极高的耐水性和非常好的耐皂化性能
Acronal® PS 791 AP BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 乳液聚合物，用于高品质通用型建筑涂料，Acronal® PS 791 ap是一种阴离子乳液聚合物，粘度低，含有细小、良好分散的颗粒。它具有与颜填料出色的相容性和非常高的颜料粘合力。未着色的Acronal® PS 791 ap涂膜可在室温下指干。Acronal® PS 791 ap形成的涂膜透明、柔韧、光泽高，具有极高的耐水性，和非常好的耐皂化性能
Acronal® S 400 F ap BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 ACRONAL®S400 F ap是一种水性丙烯酸乳液，用于弹性防水膜。水泥防水膜在耐久、高品质的建设项目中发挥重要作用。它是一种水性丙烯酸乳液，可为水泥防水膜提供出色的防水性和优异的抗裂缝-桥接性能。它不含有氨或甲醛，可增加您工作场所的健康和安全。
Acronal® S 727 BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 Acronal®S 727是疏水性共聚物基料，它含有活性化合物来阻止和锁定单宁和尼古丁。它创建了一个无粘性，弹性而耐用的膜。它可为热带木头和木节着色剂提供耐水性和出色的单宁阻隔性能。它不含任何配方中需要的附加氧化锌或替代活性化合物。本产品是单宁和尼古丁阻隔底漆，装饰和工业应用应用，它普遍适用于透明，特别是有色体系。
Acronal® Xpress 7512 ap BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 ACRONAL®Xpress AP 7512 ap是一种水性丙烯酸乳液，用于配制超快速固化胶黏水泥防水膜。它是快速固化技术单组分胶黏水泥防水膜界的“行业标杆”。它专门设计用于在高潮湿的气候条件下的快速重涂。巴斯夫的最新防水聚合物利用多种创新的表面特征和独特的成分组合，可实现低吸水率，出色的耐起泡性，高颜料粘合能力。
Amicure® CG-325G Curing Agent Evonik Operations GmbH, BL Crosslinkers Amicure® CG-325G curing agent is a micronized grade of dicyandiamide containing 1.5% of an inert flow control additive to inhibit clumping and improve handling. It is designed for use as a latent curing agent for epoxy resins. Request Sample
Amicure® DBU-E Evonik Operations GmbH, BL Crosslinkers Amicure® DBU-E is a high-purity, electronic grade of diazabicyclo-undecene. Highly efficient tertiary amine accelerator. Used in electrical encapsulation and transfer moulding powders. Request Sample
Amicure® IC-221 Curing Agent Evonik Operations GmbH, BL Crosslinkers Amicure® IC-221 is an amine curing agent specifically designed for polyisocyanate resins. Preferred resins of choice are standard and low viscosity HDI trimer isocyanates for a range of industrial applications. Clear and pigmented topcoats and filled self...展开 Amicure® IC-221 is an amine curing agent specifically designed for polyisocyanate resins. Preferred resins of choice are standard and low viscosity HDI trimer isocyanates for a range of industrial applications. Clear and pigmented topcoats and filled self-leveling systems based on Amicure® IC-221 support high aesthetics, UV stability and rapid property development for fast return to service. Amicure® IC-221 curing agent is free of solvents, alkyl phenol derivatives and benzyl alcohol. 收起 Request Sample
Amicure® IC-321 Evonik Operations GmbH, BL Crosslinkers Amicure® IC-321 is an curing agent specifically designed to cure under high humidity conditions with standard HDI Trimer isocyanate resins for a broad range of industrial flooring applications. Amicure® IC-321 curing agent for polyisocyanate resin is desi...展开 Amicure® IC-321 is an curing agent specifically designed to cure under high humidity conditions with standard HDI Trimer isocyanate resins for a broad range of industrial flooring applications. Amicure® IC-321 curing agent for polyisocyanate resin is designed to provide long working pot-life and high flexibility. In addition, clear and pigmented topcoats and filled self-leveling systems based on Amicure® IC-321 curing agent for polyisocyanate resin exhibit rapid property development and high aesthetics and are suitable for exterior application. 收起 Request Sample
Amicure® IC166 Curing Agent Evonik Operations GmbH, BL Crosslinkers Amicure® IC166 is a polycarbamide curing agent for DTM C3 coatings. It is faster-curing compared to Amicure® IC133. This product is ideal for plural component spray systems. Request Sample
Amicure® UR2T Evonik Operations GmbH, BL Crosslinkers Amicure® UR2T is a substitute for chlorophenyl ureas; co-curing accelerator for dicyandiamide-cured epoxy resins. Faster green strength adhesion build. Used in one-component paste and film adhesives, high-performance composites, and prepregs. Request Sample
Amicure® UR7/10 Evonik Operations GmbH, BL Crosslinkers Amicure® UR7/10 cure accelerator, a finely ground version of Amicure UR accelerator; is a substituted urea-based accelerator (1 Phenyl 3,3 dimethyl urea) for dicyandiamidecured epoxy resins. It combines excellent latency at ambient temperature with rapid ...展开 Amicure® UR7/10 cure accelerator, a finely ground version of Amicure UR accelerator; is a substituted urea-based accelerator (1 Phenyl 3,3 dimethyl urea) for dicyandiamidecured epoxy resins. It combines excellent latency at ambient temperature with rapid cure in systems heated above its activation temperature. Amicure® UR7/10 is supplied as a micropulverized crystalline solid which is easily dispersed into liquid epoxy resin. Applications for this product include one-component paste and film adhesives, heat-cure composites, and prepreg composites. 收起 Request Sample
Ancamide® 2050 Curing Agent Evonik Operations GmbH, BL Crosslinkers 聚酰胺，具有高光泽、柔韧、坚硬和抗反冲击性能。无需诱导。适用于高固体份涂料和底漆、混凝土涂料、密封剂和腻子以及泳池漆 Request Sample
Ancamide® 220 Curing Agent Evonik Operations GmbH, BL Crosslinkers Ancamide® 220 Curing Agent is one in a series of standard reactive polyamides for use in the curing of epoxy resins. It has been designed particularly for use in solvent-based surface coatings. Request Sample
ANCAMIDE® 220-IPA-73 Curing Agent Evonik Operations GmbH, BL Crosslinkers ANCAMIDE® 220-IPA-73 Curing Agent is one in a series of standard reactive polyamides intended for use in the curing of epoxy resins. It is ideal for use in solvent-based maintenance coatings, primers, sealers, and coatings for concrete. Request Sample
ANCAMIDE® 220-X-70 Curing Agent Evonik Operations GmbH, BL Crosslinkers ANCAMIDE® 220-X-70 Curing Agent is one in a series of standard reactive polyamides intended for use in the curing of epoxy resins. It is ideal for use in solvent-based maintenance coatings, primers, sealers and coatings for concrete. Request Sample
ANCAMIDE 221® Curing Agent Evonik Operations GmbH, BL Crosslinkers ANCAMIDE 221® Curing Agent is a member of a series of reactive polyamides developed for use in the curing of epoxy resins in solvent-based surface coatings applications. Special features include good color, color stability, chemical resistance and excelle...展开 ANCAMIDE 221® Curing Agent is a member of a series of reactive polyamides developed for use in the curing of epoxy resins in solvent-based surface coatings applications. Special features include good color, color stability, chemical resistance and excellent corrosion resistance properties. It is freely compatible with a wide range of solvents, including those generally used in epoxy resin based coatings. 收起 Request Sample
ANCAMIDE 221-X70® Curing Agent Evonik Operations GmbH, BL Crosslinkers ANCAMIDE 221-X70® Curing Agent is a member of a new series of reactive polyamides developed for use in the curing of epoxy resins in solvent-based surface coatings applications. Ancamide 221-X70 curing agent is TETA free and supplied at 70% solids in xyle...展开 ANCAMIDE 221-X70® Curing Agent is a member of a new series of reactive polyamides developed for use in the curing of epoxy resins in solvent-based surface coatings applications. Ancamide 221-X70 curing agent is TETA free and supplied at 70% solids in xylene. Special features include good color, color stability, chemical resistance and excellent corrosion resistance properties. It is freely compatible with a wide range of solvents, including those generally used in epoxy resin based coatings. 收起 Request Sample
Ancamide® 2353 Curing Agent Evonik Operations GmbH, BL Crosslinkers 聚酰胺，可形成出色的高光泽涂膜，快干，无诱导时间。涂膜硬而且具有非常好的耐溶剂和耐腐蚀性能。具有聚酰胺最佳的耐化学品性能 Request Sample
Ancamide® 2396 Curing Agent Evonik Operations GmbH, BL Crosslinkers 改性酰胺胺，可在室温下与液体环氧树脂反应 Request Sample
Ancamide® 2426 Curing Agent Evonik Operations GmbH, BL Crosslinkers 不含增塑剂的酰胺胺，具有长开罐使用时间和出色的抗发白性能，出色的硬度形成和良好的耐水性试剂的能力。适用于高和100%固体份涂料和底漆 Request Sample
Ancamide® 2445 Curing Agent Evonik Operations GmbH, BL Crosslinkers 低粘度聚酰胺，可在低温下快速固化。低胺残留量。具有高光泽、出色的硬度和柔韧性 Request Sample
Ancamide 2634™ Curing Agent Evonik Operations GmbH, BL Crosslinkers 改性聚酰胺，设计用于双组分溶剂型环氧涂料，其中高性能和低成本是主要要求 Request Sample
Ancamide® 2652 Curing Agent Evonik Operations GmbH, BL Crosslinkers Ancamide® 2652 Curing Agent is a specialpolyamide adduct designed for use with liquid epoxy resins in two-part, ambient-cure coatings specifically developed to provide long overcoatability with epoxy and alternative resin technology. Request Sample
Ancamide® 2769 Curing Agent Evonik Operations GmbH, BL Crosslinkers Ancamide® 2769 curing agent is an innovative technology designed for use with liquid epoxy resin. Showing polyamide like properties it is also 100% solids, contains no plasticizer and exhibits very low viscosity. This allows for formulation of solvent fre...展开 Ancamide® 2769 curing agent is an innovative technology designed for use with liquid epoxy resin. Showing polyamide like properties it is also 100% solids, contains no plasticizer and exhibits very low viscosity. This allows for formulation of solvent free or high solids coatings with ultra low volatile organic components. 收起 Request Sample
Ancamide® 2832 Curing Agent Evonik Operations GmbH, BL Crosslinkers Ancamide® 2832 is a modified polyamide curing agent developed to provide rapid through cure and long overcoatability with epoxy resins. It can be used in refinish, non-automotive OEM and in wet-on-wet type applications in the protective coatings market fo...展开 Ancamide® 2832 is a modified polyamide curing agent developed to provide rapid through cure and long overcoatability with epoxy resins. It can be used in refinish, non-automotive OEM and in wet-on-wet type applications in the protective coatings market for fast return to service. 收起 Request Sample
Ancamide® 2864 Curing Agent Evonik Operations GmbH, BL Crosslinkers Ancamide® 2864 is a next generation modified polyamide curing agent intended to be used in epoxy coatings for high-performance, corrosion resistant coatings. The curing agent exhibits low viscosity and fast through-cure with good blush resistance at both ...展开 Ancamide® 2864 is a next generation modified polyamide curing agent intended to be used in epoxy coatings for high-performance, corrosion resistant coatings. The curing agent exhibits low viscosity and fast through-cure with good blush resistance at both ambient and at low temperature conditions (5°C). 收起 Request Sample
Ancamide® 2891 Curing Agent Evonik Operations GmbH, BL Crosslinkers Ancamide® 2891 curing agent is a modified Polyamide that enables excellent low temperature cure where high performance and cost effectiveness are key requirements. The curing agent is specifically designed for use in two component high solid or solvent b...展开 Ancamide® 2891 curing agent is a modified Polyamide that enables excellent low temperature cure where high performance and cost effectiveness are key requirements. The curing agent is specifically designed for use in two component high solid or solvent borne epoxy coatings, where high barrier properties and fast return to service are essential. Ancamide® 2891 Curing Agent is alkyl phenol and salicylic acid free while offering excellent Corrosion and Chemical Resistance along with good appearance. The product can be used over a broad temperature range and provides overnight cure at temperatures down to 5°C. 收起 Request Sample
Ancamide® 350A Curing Agent Evonik Operations GmbH, BL Crosslinkers Ancamide® 350A is a member of a series of reactive polyamides developed for use in the curing of epoxy resins. It has a high imidazoline content, longer pot-life and molecular weight, and lower viscosity than Ancamide® 220 or 260A and is used primarily, b...展开 Ancamide® 350A is a member of a series of reactive polyamides developed for use in the curing of epoxy resins. It has a high imidazoline content, longer pot-life and molecular weight, and lower viscosity than Ancamide® 220 or 260A and is used primarily, but not exclusively with liquid epoxy resin. Applications for Anacamide® 350A include adhesives, sealants, putties, flexible cable jointing and high solids coatings. 收起 Request Sample
Ancamide® 351A Curing Agent Evonik Operations GmbH, BL Crosslinkers Ancamide® 351A Curing Agent is a member of a new series of reactive polyamides developed for use in the curing of epoxy resins in coatings and adhesives applications. Special features include good color, color stability, excellent corrosion resistance and...展开 Ancamide® 351A Curing Agent is a member of a new series of reactive polyamides developed for use in the curing of epoxy resins in coatings and adhesives applications. Special features include good color, color stability, excellent corrosion resistance and superior adhesion properties. It is freely compatible with a wide range of solvents, including those generally used in epoxy resin based coatings. 收起 Request Sample
Ancamide® 375A Curing Agent Evonik Operations GmbH, BL Crosslinkers ANCAMIDE™ 350A的更低粘度版本，是一种标准型高咪唑啉含量聚酰胺。适用于低VOC涂料、混凝土修补和薄泥浆以及胶粘剂 Request Sample
ANCAMIDE® 400 Curing Agent Evonik Operations GmbH, BL Crosslinkers ANCAMIDE® 400 Curing Agent is a unique, low viscosity reactive polyamide developed specifically for use in the curing of liquid epoxy resins. It can be used in a wide range of applications, including flooring and surface coatings, adhesives, sealant and p...展开 ANCAMIDE® 400 Curing Agent is a unique, low viscosity reactive polyamide developed specifically for use in the curing of liquid epoxy resins. It can be used in a wide range of applications, including flooring and surface coatings, adhesives, sealant and putties, castings, laminates, and cable jointing compounds. 收起 Request Sample
Ancamide® 512 Curing Agent Evonik Operations GmbH, BL Crosslinkers Ancamide® 512 Curing Agent is an aliphatic amidoamine curing agent designed for use with liquid epoxy resin at ambient or elevated temperatures. it can be used as the sole curing agent or in a mixture with other amine-based curing agents to adjust the cur...展开 Ancamide® 512 Curing Agent is an aliphatic amidoamine curing agent designed for use with liquid epoxy resin at ambient or elevated temperatures. it can be used as the sole curing agent or in a mixture with other amine-based curing agents to adjust the cure rate or other properties. 收起 Request Sample
Ancamide® 910 Evonik Operations GmbH, BL Crosslinkers Ancamide® 910 curing agent is a versatile, flexible hardener designed for use with liquid epoxy resin. Its engineered chemistry provides a unique combination of properties not found in other epoxy hardeners. It delivers outstanding flexibility/peel streng...展开 Ancamide® 910 curing agent is a versatile, flexible hardener designed for use with liquid epoxy resin. Its engineered chemistry provides a unique combination of properties not found in other epoxy hardeners. It delivers outstanding flexibility/peel strength, excellent thermal shock resistance, and good electrical properties. Additional features include lower viscosity than conventional polyamides and DOT non-corrosive status. Ancamide® 910 curing agent can be used either as a sole curing agent or as a modifier. 收起 Request Sample
Ancamine® 1618 Evonik Operations GmbH, BL Crosslinkers Ancamine® 1618 curing agent is a low-colour, low-viscosity, modified cycloaliphatic amine intended for ambient or low-temperature curing of liquid epoxy resins. It gives high-gloss films that are resistant to a variety of chemicals. These properties make ...展开 Ancamine® 1618 curing agent is a low-colour, low-viscosity, modified cycloaliphatic amine intended for ambient or low-temperature curing of liquid epoxy resins. It gives high-gloss films that are resistant to a variety of chemicals. These properties make it ideal for formulating floorings, maintenance coatings, tank linings, and secondary containment linings. Its very low colour and good colour stability make it appropriate for clear and pastel shade coatings. 收起 Request Sample
Ancamine® 2014AS/FG Evonik Operations GmbH, BL Crosslinkers Ancamine® 2014AS/FG is a modified aliphatic polyamine adduct designed for use as a latent catalyst and curing agent for liquid epoxy resins. They can also be used as accelerators for dicyandiamide (DICY). This white micronised powder is applied in one-com...展开 Ancamine® 2014AS/FG is a modified aliphatic polyamine adduct designed for use as a latent catalyst and curing agent for liquid epoxy resins. They can also be used as accelerators for dicyandiamide (DICY). This white micronised powder is applied in one-component adhesives and solvent free laminating. 收起 Request Sample
Ancamine™ 2264 Evonik Operations GmbH, BL Crosslinkers Ancamine™ 2264 curing agent is cycloaliphatic amine designed for use with liquid epoxy resins in the fabrication of industrial composites. It contains polycycloaliphatic polyamines (high functionality cycloaliphatic amines), which allows improved stiffnes...展开 Ancamine™ 2264 curing agent is cycloaliphatic amine designed for use with liquid epoxy resins in the fabrication of industrial composites. It contains polycycloaliphatic polyamines (high functionality cycloaliphatic amines), which allows improved stiffness and elevated temperature performance in cured systems, compared with cycloaliphatic diamine-cured systems. Applications for this product include filament winding, resin transfer molding, potting for tooling, electrical and general industrial applications. 收起 Request Sample
Ancamine® 2334 Curing Agent Evonik Operations GmbH, BL Crosslinkers Ancamine® 2334 Curing Agent is a modified cycloaliphatic amine curing agent designed for use with liquid epoxy resin at ambient temperature. The key benefits of formulations based on this product are excellent resistance to hot oleic acid, and good resist...展开 Ancamine® 2334 Curing Agent is a modified cycloaliphatic amine curing agent designed for use with liquid epoxy resin at ambient temperature. The key benefits of formulations based on this product are excellent resistance to hot oleic acid, and good resistance to dilute sulfuric acid and methanol. Appropriate applications include industrial flooring and chemically resistant coatings in food preparation areas. 收起 Request Sample
Ancamine® 2337S Evonik Operations GmbH, BL Crosslinkers Ancamine® 2337S curing agent is a modified aliphatic amine designed for use as a latent curing agent for epoxy resins. Applications for this product include one-component conduction or induction heat-cure adhesives, potting, coatings, and hot-melt prepreg...展开 Ancamine® 2337S curing agent is a modified aliphatic amine designed for use as a latent curing agent for epoxy resins. Applications for this product include one-component conduction or induction heat-cure adhesives, potting, coatings, and hot-melt prepregs. This product is a light yellow powder. 收起 Request Sample
ANCAMINE® 2489 CURING AGENT Evonik Operations GmbH, BL Crosslinkers 改性脂环族胺，浅色、粘度低。允许更高的填料使用量或降低对稀释剂的需求量。可提供非常快速的固化和高光泽以及抗发白性能 Request Sample
Ancamine® 2712 Curing Agent Evonik Operations GmbH, BL Crosslinkers Ancamine® 2712 Curing Agent is a modified polyamine curing agent intended for use as a curing agent for diluted liquid epoxy resin at ambient and low temperature application (10 °C). This product is free of alkylsubstituted phenol and benzyl alcohol, faci...展开 Ancamine® 2712 Curing Agent is a modified polyamine curing agent intended for use as a curing agent for diluted liquid epoxy resin at ambient and low temperature application (10 °C). This product is free of alkylsubstituted phenol and benzyl alcohol, facilitating zero volatile organic component coating and flooring formulations. Also, Ancamine® 2712 curing agent allows the use in emission compliant coating and flooring systems. 收起 Request Sample
Ancamine® 2712 M Evonik Operations GmbH, BL Crosslinkers Ancamine 2712M curing agent is a modified polyamine curing agent intended for use as a curing agent for diluted liquid epoxy resin at ambient and low temperature application (10 °C). Ancamine 2712M curing agent is free of alkylsubstituted phenol and benzy...展开 Ancamine 2712M curing agent is a modified polyamine curing agent intended for use as a curing agent for diluted liquid epoxy resin at ambient and low temperature application (10 °C). Ancamine 2712M curing agent is free of alkylsubstituted phenol and benzyl alcohol, facilitating zero volatile organic component coating and flooring formulations. Also, Ancamine 2712M curing agent allows the use in emission compliant coating and flooring systems. 收起 Request Sample
Ancamine® 2726 Curing Agent Evonik Operations GmbH, BL Crosslinkers Ancamine® 2726 is a modified cycloaliphatic amine that offers good color and color stability. It provides high-gloss, non-blushing films with good chemical resistance. This product is used in solvent-free and high-solids coatings, gel coats, and self-leve...展开 Ancamine® 2726 is a modified cycloaliphatic amine that offers good color and color stability. It provides high-gloss, non-blushing films with good chemical resistance. This product is used in solvent-free and high-solids coatings, gel coats, and self-leveling flooring. 收起 Request Sample
Ancamine® 2735 Curing Agent Evonik Operations GmbH, BL Crosslinkers Ancamine® 2735 is a modified cycloaliphatic polyamine. This low viscosity, low color curing agent is intended for ambient cure of liquid epoxy resin, but can cure resin systems down to 5 °C. Ancamine® 2735 advantages include, outstanding yellowing resist...展开 Ancamine® 2735 is a modified cycloaliphatic polyamine. This low viscosity, low color curing agent is intended for ambient cure of liquid epoxy resin, but can cure resin systems down to 5 °C. Ancamine® 2735 advantages include, outstanding yellowing resistance, low color, fast cure speed and hardness build at ambient and low temperature, low viscosity, very good chemical and mechanical resistance and good carbamation resistance Ancamine® 2735 applications may include industrial and decorative self leveling flooring, high solids and solvent free coatings. 收起 Request Sample
Ancamine® 2739 Evonik Operations GmbH, BL Crosslinkers Ancamine® 2739 curing agent is a modified polyamine curing agent intended for use as a curing agent for diluted liquid epoxy resin at ambient and low temperature application (10 °C). This product is free of alkylsubstituted phenol, facilitating in low vol...展开 Ancamine® 2739 curing agent is a modified polyamine curing agent intended for use as a curing agent for diluted liquid epoxy resin at ambient and low temperature application (10 °C). This product is free of alkylsubstituted phenol, facilitating in low volatile organic component coating and flooring formulations and allows the use in emission compliant systems. Compared to Ancamine® 2712 curing agent, Ancamine® 2739 curing agent offers long pot-life whilst retaining cure speed and through cure and providing enhanced UV durability. 收起 Request Sample
Ancamine® 2748 Evonik Operations GmbH, BL Crosslinkers Ancamine® 2748 curing agent is a modified cycloaliphatic amine designed for use with liquid epoxy resins in the formulation of two component epoxy coatings. This curative is intended for use in coatings that require resistance to acids, bases and solvents...展开 Ancamine® 2748 curing agent is a modified cycloaliphatic amine designed for use with liquid epoxy resins in the formulation of two component epoxy coatings. This curative is intended for use in coatings that require resistance to acids, bases and solvents in markets including waste water, secondary containment, flooring, tank coatings and other demanding applications. 收起 Request Sample
Ancamine® 2749 Evonik Operations GmbH, BL Crosslinkers Ancamine® 2749 is a cycloaliphatic amine adduct curing agent designed for use with liquid epoxy resins. It is supplied as an amber liquid and has a viscosity of 275cPs at 25 °C. Request Sample
Ancamine® 2759 Curing Agent Evonik Operations GmbH, BL Crosslinkers Ancamine® 2759 Curing Agent is a modified cycloaliphatic polyamine intended for use as an ambient curing agent for liquid epoxy resin. Systems based on Ancamine® 2759 curing agent deliver fast cure speed and high resistance to carbamation and water spotti...展开 Ancamine® 2759 Curing Agent is a modified cycloaliphatic polyamine intended for use as an ambient curing agent for liquid epoxy resin. Systems based on Ancamine® 2759 curing agent deliver fast cure speed and high resistance to carbamation and water spotting. Ancamine® 2759 curing agent can be used to formulate solvent-free topcoats or self leveling and screed floorings where high chemical resistance is required. The product is free of nonyl phenol. 收起 Request Sample
Ancamine® 2765 Curing Agent Evonik Operations GmbH, BL Crosslinkers Ancamine® 2765 Curing Agent is an aliphatic amine adduct. When used with liquid epoxy resins in a coating formulation, it provides very good solvent and alcohol resistance. It also imparts good mechanical properties. Ancamine® 2765 is ideal for use in sol...展开 Ancamine® 2765 Curing Agent is an aliphatic amine adduct. When used with liquid epoxy resins in a coating formulation, it provides very good solvent and alcohol resistance. It also imparts good mechanical properties. Ancamine® 2765 is ideal for use in solvent-free coatings, laminates, adhesives, and as an accelerator for other curing agents. 收起 Request Sample
Ancamine® 2800 Evonik Operations GmbH, BL Crosslinkers Ancamine® 2800 is a modified polyamine intended for use as a curing agent for diluted liquid epoxy resin at ambient and low temperature application. It is free of nonyl phenol, facilitating in low volatile organic component coating and flooring formulatio...展开 Ancamine® 2800 is a modified polyamine intended for use as a curing agent for diluted liquid epoxy resin at ambient and low temperature application. It is free of nonyl phenol, facilitating in low volatile organic component coating and flooring formulations. 收起 Request Sample
Ancamine® 2802 Curing Agent Evonik Operations GmbH, BL Crosslinkers Ancamine® 2802 curing agent is a modified polyamine intended for use as a curing agent for diluted liquid epoxy resin at ambient temperature application. Systems based on Ancamine® 2802 curing agent deliver excellent colour stability and high aesthetics w...展开 Ancamine® 2802 curing agent is a modified polyamine intended for use as a curing agent for diluted liquid epoxy resin at ambient temperature application. Systems based on Ancamine® 2802 curing agent deliver excellent colour stability and high aesthetics which makes the product ideal for low yellowing epoxy coating and flooring applications. In addition, Ancamine2802 curing agent was developed for use in emission compliant coatings and floorings. 收起 Request Sample
Ancamine® 2908A Curing Agent Evonik Operations GmbH, BL Crosslinkers Ancamine® 2908A Curing Agent is a low viscosity liquid accelerator designed to cure liquid epoxy resins with various anhydride systems at elevated temperatures. The combination of its liquid form and its unique chemistry offers long working time and low v...展开 Ancamine® 2908A Curing Agent is a low viscosity liquid accelerator designed to cure liquid epoxy resins with various anhydride systems at elevated temperatures. The combination of its liquid form and its unique chemistry offers long working time and low viscosity. This can enhance fabricator processing with improved fiber wetting, minimised material waste and improved overall throughput. It is recommended for use in composites’ processing, industrial electrical, and electronics applications. 收起 Request Sample
ANCAREZ® AR555 Waterborne Epoxy Resin Evonik Operations GmbH, BL Crosslinkers ANCAREZ® AR555 Waterborne Epoxy Resin is a waterborne solid epoxy resin dispersion delivered at 55% solids in water. It is designed for use in two-component, ambient-cure epoxy systems. It delivers superior performance at lower cost when compared to con...展开 ANCAREZ® AR555 Waterborne Epoxy Resin is a waterborne solid epoxy resin dispersion delivered at 55% solids in water. It is designed for use in two-component, ambient-cure epoxy systems. It delivers superior performance at lower cost when compared to conventional solid resin dispersions. The unique nature of this product allows film formulation without high levels of coalescing solvent, which enables the formulation of low-odor, zero-VOC systems. 收起 Request Sample
Anquamine® 100 Evonik Operations GmbH, BL Crosslinkers Anquamine® 100 is a waterborne curing agent equally suitable for standard liquid epoxy resin and solid epoxy resin dispersions. It combines in a unique way, fast drying with an extremely long pot life when used with liquid epoxy resin. Anquamine® 100 curi...展开 Anquamine® 100 is a waterborne curing agent equally suitable for standard liquid epoxy resin and solid epoxy resin dispersions. It combines in a unique way, fast drying with an extremely long pot life when used with liquid epoxy resin. Anquamine® 100 curing agent provides 6-8 hours pot life with liquid epoxy resins and addresses the typically short pot life of 1-2 hours from current two component, water-based systems. 收起 Request Sample
Anquamine® 287 Curing Agent - Fast One-Day Flooring System on to Concrete Evonik Operations GmbH, BL Crosslinkers Anquamine® 287 curing agent is a water-based epoxy curing agent based on a Mannich base adduct specifically developed for concrete primer applications including green concrete. It is designed for use with standard and modified liquid epoxy resins without ...展开 Anquamine® 287 curing agent is a water-based epoxy curing agent based on a Mannich base adduct specifically developed for concrete primer applications including green concrete. It is designed for use with standard and modified liquid epoxy resins without the addition of emulsifiers. Anquamine® 287 curing agent based primers exhibit excellent adhesion to concrete and penetration properties that out perform other conventional curing agent technology. The product is VOC free and supports low emission applications. 收起 Request Sample
Anquamine® 287 Waterborne Curing Agent Evonik Operations GmbH, BL Crosslinkers Anquamine® 287 a novel water-based epoxy curing agent designed for use in two part epoxy systems with standard liquid and modified liquid epoxy resins without the addition of emulsifiers. Its appearance is amber to greenish liquid. Anquamine® 287 based pr...展开 Anquamine® 287 a novel water-based epoxy curing agent designed for use in two part epoxy systems with standard liquid and modified liquid epoxy resins without the addition of emulsifiers. Its appearance is amber to greenish liquid. Anquamine® 287 based primers exhibit excellent adhesion to green concrete and penetration properties that outperform other water-based curing agent technology. It also can be formulated into a cementitious epoxy floor with excellent moisture permeability and thermal shock resistance. Applications can include, cementitious epoxy flooring, primer/sealer for green concrete, concrete curing compound and primer for old and new concrete. 收起 Request Sample
Anquamine® 401 Evonik Operations GmbH, BL Crosslinkers 水性固化剂，具有快速干燥时间，以及出色的硬度和良好的防腐蚀性能。可为高光泽涂膜提供出色的保光性 Request Sample
Anquamine® 419 Evonik Operations GmbH, BL Crosslinkers 水性固化剂，具有快干时间和出色的耐腐蚀和耐湿性，良好的光泽和保光性，以及对钢基材出色的附着力 Request Sample
Anquamine® 721 Evonik Operations GmbH, BL Crosslinkers Anquamine® 721 waterborne curing agent is a modified amine curing agent designed for use in waterborne epoxy coatings where cost effectiveness and high performance are key requirements. Anquamine® 721 curing agent can be formulated to low or zero VOC....展开 Anquamine® 721 waterborne curing agent is a modified amine curing agent designed for use in waterborne epoxy coatings where cost effectiveness and high performance are key requirements. Anquamine® 721 curing agent can be formulated to low or zero VOC. It offers good pot life, good dry speed, and good emulsion stability even at low solids. Cured coatings exhibit high gloss, a balance of hardness and flexibility, and very good adhesion to concrete. 收起 Request Sample
Anquamine® 728 Evonik Operations GmbH, BL Crosslinkers Anquamine® 728 waterborne curing agent is a multi-purpose curing agent for use in concrete primers and topcoats, and delivers fast cure speed at low temperature (10˚C) and high humidity (up to 85% RH). It can be used with solid epoxy resin dispersion, Anc...展开 Anquamine® 728 waterborne curing agent is a multi-purpose curing agent for use in concrete primers and topcoats, and delivers fast cure speed at low temperature (10˚C) and high humidity (up to 85% RH). It can be used with solid epoxy resin dispersion, Ancarez® AR 555, and standard liquid epoxy resin. 收起 Request Sample
Anquamine® 731 Evonik Operations GmbH, BL Crosslinkers Anquamine® 731 is a water-based curing agent is specifically designed for a standard liquid epoxy resin. It is specifically designed for costeffective high-film build concrete coatings. It is particularly suitable for water-based self-leveling systems. ...展开 Anquamine® 731 is a water-based curing agent is specifically designed for a standard liquid epoxy resin. It is specifically designed for costeffective high-film build concrete coatings. It is particularly suitable for water-based self-leveling systems. Anquamine® 731 curing agent easily emulsifies standard liquid epoxy resins without the need for emulsifiable or pre-emulsified epoxy resins. 收起 Request Sample
Anquamine® 735 Evonik Operations GmbH, BL Crosslinkers Anquamine® 735 is a waterborne curing agent for standard liquid epoxy resin. It is specifically designed for cost effective high film build concrete coatings. It is particularly suitable for water-based self levelling systems of 1-3 mm film thickness. Fo...展开 Anquamine® 735 is a waterborne curing agent for standard liquid epoxy resin. It is specifically designed for cost effective high film build concrete coatings. It is particularly suitable for water-based self levelling systems of 1-3 mm film thickness. Formulations based on Anquamine® 735 curing agent provide highly decorative functional floors without the requirement for plasticisers or solvents. 收起 Request Sample
Basonat® HB 100 BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 Basonat® HB 100是一种脂肪族聚异氰酸酯，用于制备耐光和耐候性双组分聚氨酯涂料。它由基于六亚甲基二异氰酸酯的多异氰酸酯缩二脲组成。Basonat® HB 100可用于配制涂料。而其它Basonat®HB系列产品所含的溶剂证明用于涂料是麻烦的，比如芳族烃过度增溶聚苯乙烯。