| Biomega SDA™ 816000 | Bioriginal | Biomega SDA™ 816000 is a clear yellow liquid oil with a faint odor. It is obtained by extraction and is fully refined. The oil contains minimally 12% SDA, typically 13% GLA and typically 33% ALA. Refined Echium Oil has the novel food status according to E...展开 Biomega SDA™ 816000 is a clear yellow liquid oil with a faint odor. It is obtained by extraction and is fully refined. The oil contains minimally 12% SDA, typically 13% GLA and typically 33% ALA. Refined Echium Oil has the novel food status according to EU regulation 258/97. Biomega SDA™ 816000 provides the body with a source for EPA building blocks. It is used in applications such as supplements, cheese, milk-based drinks, margarine, dressings and breakfast cereals. 收起 | |
| BioPure DHA® IF 814340 | Bioriginal | BioPure DHA® IF 814340 is a light yellow oil with a very light fish odor. It is obtained from the heads of tuna fish to minimize the risk of contaminants. The oil is coldextracted by a proprietary process to reduce the risk of oxidation. It is fully refin...展开 BioPure DHA® IF 814340 is a light yellow oil with a very light fish odor. It is obtained from the heads of tuna fish to minimize the risk of contaminants. The oil is coldextracted by a proprietary process to reduce the risk of oxidation. It is fully refined and deodorized. The oil contains a minimum of 25% DHA. BioPure DHA® is used to support children's learning, concentration, memory and eye health. 收起 | |
| Biopure DHA® Refined 814220 | Bioriginal | Biopure DHA® Refined 814220 is a rich natural source of the omega-3 fatty acid DHA, essential for neural development and cognitive function. This clear light yellow liquid has a faint fish odour. The oil is coldextracted by a proprietary process to reduce...展开 Biopure DHA® Refined 814220 is a rich natural source of the omega-3 fatty acid DHA, essential for neural development and cognitive function. This clear light yellow liquid has a faint fish odour. The oil is coldextracted by a proprietary process to reduce the risk of oxidation. The oil contains a minimum of 25% DHA and a minimum of 30% total omega-3. It is used for junior, senior, prenatal, and postnatal supplements. 收起 | |
| Black Cumin Oil Virgin 808520 | Bioriginal | Black Cumin Oil Virgin 808520 is obtained from the seeds of Nigella sativa, a member of the Ranunculaceae family. Black Cumin Oil Virgin 808520 is applied as a nutritional supplement, currently being promoted as ‘improving the immune system’ and ‘detoxif...展开 Black Cumin Oil Virgin 808520 is obtained from the seeds of Nigella sativa, a member of the Ranunculaceae family. Black Cumin Oil Virgin 808520 is applied as a nutritional supplement, currently being promoted as ‘improving the immune system’ and ‘detoxifying the gut’. It's also applied as an anti-microbial in conjunction with, or as a natural alternative to conventional antibiotics. 收起 | |
| Blackcurrant Oil Refined 806000 | Bioriginal | Blackcurrant Oil Refined 806000 is a clear to slightly turbid, yellow liquid oil with a faint odour. It is obtained by extraction and is fully refined. The oil contains a minimum of 13% GLA and typically 2.5% SDA. Blackcurrant Oil Refined 806000 provides ...展开 Blackcurrant Oil Refined 806000 is a clear to slightly turbid, yellow liquid oil with a faint odour. It is obtained by extraction and is fully refined. The oil contains a minimum of 13% GLA and typically 2.5% SDA. Blackcurrant Oil Refined 806000 provides both GLA and ALA supporting immune function, diabetic neuropathy and high blood cholesterol. 收起 | |
| BLUESIL RTV 1556 A | Elkem Silicones | BLUESIL RTV 1556 is a two component, high strength, addition cure, room temperature or heat vulcanized silicone rubber compound. Designed specifically for moldmaking and resin infusion vacuum bag applications, it offers low viscosity, high tear cut resist...展开 BLUESIL RTV 1556 is a two component, high strength, addition cure, room temperature or heat vulcanized silicone rubber compound. Designed specifically for moldmaking and resin infusion vacuum bag applications, it offers low viscosity, high tear cut resistance, and easy release for long lasting molds. BLUESIL RTV 1556 has high temperature and chemical resistance with excellent flexibility, low shrinkage, and excellent detail reproduction which makes it well suited for production and prototyping use with all types of casting resins. 收起 | |
| BLUESIL RTV 1556 FC B | Elkem Silicones | BLUESIL RTV 1556 is a two component, high strength, addition cure, room temperature or heat vulcanized silicone rubber compound. Designed specifically for moldmaking and resin infusion vacuum bag applications, it offers low viscosity, high tear cut resist...展开 BLUESIL RTV 1556 is a two component, high strength, addition cure, room temperature or heat vulcanized silicone rubber compound. Designed specifically for moldmaking and resin infusion vacuum bag applications, it offers low viscosity, high tear cut resistance, and easy release for long lasting molds. BLUESIL RTV 1556 has high temperature and chemical resistance with excellent flexibility, low shrinkage, and excellent detail reproduction which makes it well suited for production and prototyping use with all types of casting resins. 收起 | |
| BLUESIL RTV 3428 A | Elkem Silicones | BLUESIL RTV 3428 A is a two component silicone elastomer which cures at room temperature by a polyaddition reaction. This reaction can be accelerated by heat. | |
| BLUESIL RTV 3536 P A | Elkem Silicones | BLUESIL RTV 3536 P A&B is a two-component silicone elastomer which cures at room temperature by a polyaddition reaction and leads to a flexible and elastic material. | |
| Borage Oil CP Refined 20% GLA 802130 | Bioriginal | Borage Oil CP Refined 20% GLA 802130 is obtained from the seeds of the Borage plant that has a clear yellow liquid appearance and a faint odour. It has shown a beneficial effect in many conditions with an inflammatory component. For the past 15 years it h...展开 Borage Oil CP Refined 20% GLA 802130 is obtained from the seeds of the Borage plant that has a clear yellow liquid appearance and a faint odour. It has shown a beneficial effect in many conditions with an inflammatory component. For the past 15 years it has been widely used as both as a dietary supplement and and as an ingredient in nutritional products such as infant formulas. 收起 | |
| Borage Oil CP Refined 22% GLA 802140 | Bioriginal | Borage Oil CP Refined 22% GLA 802140 is an extracted oil from the seeds of the borage plant with a clear yellow liquid with a faint odour. It is obtained by mechanical extraction not exceeding 50°C and is fully refined. The oil contains a minimum of 22%. ...展开 Borage Oil CP Refined 22% GLA 802140 is an extracted oil from the seeds of the borage plant with a clear yellow liquid with a faint odour. It is obtained by mechanical extraction not exceeding 50°C and is fully refined. The oil contains a minimum of 22%. GLA has been widely studied in clinical trials and has shown a beneficial effect in many conditions particularly those with an inflammatory component. For the past 15 years it has been widely used as both as a dietary supplement and and as an ingredient in nutritional products such as infant formulas. 收起 | |
| Borage Oil Refined 20% GLA 802080 | Bioriginal | Borage Oil Refined 20% GLA 802080 is obtained by extraction and is fully refined. The oil contains a minimum of 20% GLA. It benefits in many conditions particularly those with an inflammatory component. For the past 15 years it has been widely used as b...展开 Borage Oil Refined 20% GLA 802080 is obtained by extraction and is fully refined. The oil contains a minimum of 20% GLA. It benefits in many conditions particularly those with an inflammatory component. For the past 15 years it has been widely used as both as a dietary supplement and and as an ingredient in nutritional products such as infant formulas. 收起 | |
| Borage Oil Refined 22% GLA 802090 | Bioriginal | Borage Oil Refined 22% GLA 802090 ) is obtained by extraction. The oil contains a minimum of 22% GLA. has been widely studied in clinical trials and has shown a beneficial effect in many conditions particularly those with an inflammatory component. For th...展开 Borage Oil Refined 22% GLA 802090 ) is obtained by extraction. The oil contains a minimum of 22% GLA. has been widely studied in clinical trials and has shown a beneficial effect in many conditions particularly those with an inflammatory component. For the past 15 years it has been widely used as both as a dietary supplement and and as an ingredient in nutritional products such as infant formulas. 收起 | |
| Borage Oil Refined 23% GLA 802100 | Bioriginal | Borage Oil Refined 23% GLA 802100 has been widely studied in clinical trials and has shown a beneficial effect in many conditions particularly those with an inflammatory component. For the past 15 years it has been widely used as both as a dietary supplem...展开 Borage Oil Refined 23% GLA 802100 has been widely studied in clinical trials and has shown a beneficial effect in many conditions particularly those with an inflammatory component. For the past 15 years it has been widely used as both as a dietary supplement and and as an ingredient in nutritional products such as infant formulas. Borage Oil Refined 23% GLA 802100 has been known and used extensively for its medicinal properties at least since Roman times. It's also applied in cosmetics/dermatology with reduced moisture loss and anti-inflammatory. Finally, it's applied in nutritionals for infant milk and enteral nutrition formulations. 收起 | |
| Borage Oil Virgin 20% GLA 802020 | Bioriginal | Borage Oil Virgin 20% GLA 802020 is obtained using a low temperature process. The oil contains a minimum of 20% GLA. It has been widely studied in clinical trials and has shown a beneficial effect in many conditions particularly those with an inflammatory...展开 Borage Oil Virgin 20% GLA 802020 is obtained using a low temperature process. The oil contains a minimum of 20% GLA. It has been widely studied in clinical trials and has shown a beneficial effect in many conditions particularly those with an inflammatory component. For the past 15 years it has been widely used as both as a dietary supplement and and as an ingredient in nutritional products such as infant formulas. 收起 | |
| Borage Oil Virgin 22% GLA 802180 | Bioriginal | Borage Oil Virgin 22% GLA 802180 is a clear yellow-greenish liquid oil The oil of Borage seeds (Borago officinalis) is obtained using a low temperature process. The oil contains a minimum of 22% GLA. | |
| Camelina Oil Virgin 810120 | Bioriginal | Camelina Oil Virgin 810120 has a clear reddish yellow to greenish yellow liquid colour with a distinctive odour. It is obtained using a low temperature process. The oil typically contains 35% ALA. It has been promoted on health grounds due to its unusuall...展开 Camelina Oil Virgin 810120 has a clear reddish yellow to greenish yellow liquid colour with a distinctive odour. It is obtained using a low temperature process. The oil typically contains 35% ALA. It has been promoted on health grounds due to its unusually high content of alpha linolenic acid (C18:3) coupled with higher than normal levels of natural tocopherols and tocotrienols. 收起 | |
| Evening Primrose Oil CP Refined 10% GLA 804200 | Bioriginal | Evening Primrose Oil CP Refined 10% GLA 804200 is obtained from the seeds of the Evening Primrose plant (Oenothera sp.) mechanical extraction not exceeding 50°C and is fully refined. The oil contains a minimum of 10% GLA. Evening Primrose Oil has been wid...展开 Evening Primrose Oil CP Refined 10% GLA 804200 is obtained from the seeds of the Evening Primrose plant (Oenothera sp.) mechanical extraction not exceeding 50°C and is fully refined. The oil contains a minimum of 10% GLA. Evening Primrose Oil has been widely studied in clinical trials and has shown a beneficial effect in many conditions particularly those with an inflammatory component. For the past 25 years it has been widely used as both a dietary supplement and pharmaceutical product. 收起 | |
| Evening Primrose Oil CP Refined 9% GLA 804140 | Bioriginal | Evening Primrose Oil CP Refined 9% GLA 804140 is a clear yellow liquid oil with a faint odour. It is obtained from the seeds by mechanical extraction not exceeding 50°C and is fully refined. The oil contains a minimum of 9% GLA. Evening Primrose Oil has b...展开 Evening Primrose Oil CP Refined 9% GLA 804140 is a clear yellow liquid oil with a faint odour. It is obtained from the seeds by mechanical extraction not exceeding 50°C and is fully refined. The oil contains a minimum of 9% GLA. Evening Primrose Oil has been widely studied in clinical trials and has shown a beneficial effect in many conditions particularly those with an inflammatory component. For the past 25 years it has been widely used as both a dietary supplement and pharmaceutical product. 收起 | |
| Evening Primrose Oil Organic 9% GLA 804030 | Bioriginal | Evening Primrose Oil Organic 9% GLA 804030 is obtained from organic certified seeds and processes. The oil contains a minimum of 9% GLA. Evening Primrose Oil has been widely studied in clinical trials and has shown a beneficial effect in many conditions p...展开 Evening Primrose Oil Organic 9% GLA 804030 is obtained from organic certified seeds and processes. The oil contains a minimum of 9% GLA. Evening Primrose Oil has been widely studied in clinical trials and has shown a beneficial effect in many conditions particularly those with an inflammatory component. For the past 25 years it has been widely used as both a dietary supplement and pharmaceutical product. 收起 | |
| Evening Primrose Oil Refined 10% GLA 804090 | Bioriginal | Evening Primrose Oil Refined 10% GLA 804090 is a clear yellow liquid with a faint odour obtained from the seeds of the Evening Primrose plant by extraction and is fully refined. The oil contains a minimum of 10% GLA. Evening Primrose Oil has been widely s...展开 Evening Primrose Oil Refined 10% GLA 804090 is a clear yellow liquid with a faint odour obtained from the seeds of the Evening Primrose plant by extraction and is fully refined. The oil contains a minimum of 10% GLA. Evening Primrose Oil has been widely studied in clinical trials and has shown a beneficial effect in many conditions particularly those with an inflammatory component. For the past 25 years it has been widely used as both a dietary supplement and pharmaceutical product. 收起 | |
| Evening Primrose Oil Refined 9% GLA 804080 | Bioriginal | Evening Primrose Oil Refined 9% GLA 804080 is obtained from the seeds of the Evening Primrose plant by extraction and is fully refined. The oil contains a minimum of 9% GLA. Evening Primrose Oil has been widely studied in clinical trials and has shown a b...展开 Evening Primrose Oil Refined 9% GLA 804080 is obtained from the seeds of the Evening Primrose plant by extraction and is fully refined. The oil contains a minimum of 9% GLA. Evening Primrose Oil has been widely studied in clinical trials and has shown a beneficial effect in many conditions particularly those with an inflammatory component. For the past 25 years it has been widely used as both a dietary supplement and pharmaceutical product. Evening Primrose Oil Refined 9% GLA 804080 is applied in health food supplements to assist in the treatment/prevention of Atopic Eczema. 收起 | |
| Evening Primrose Oil Virgin 9% GLA 804020 | Bioriginal | Evening Primrose Oil Virgin 9% GLA 804020 is a clear yellow liquid oil with a faint odour. It is obtained from the seeds of the Evening Primrose plant by extraction and is fully refined. The oil contains a minimum of 9% GLA. Evening Primrose Oil has been...展开 Evening Primrose Oil Virgin 9% GLA 804020 is a clear yellow liquid oil with a faint odour. It is obtained from the seeds of the Evening Primrose plant by extraction and is fully refined. The oil contains a minimum of 9% GLA. Evening Primrose Oil has been widely studied in clinical trials and has shown a beneficial effect in many conditions particularly those with an inflammatory component. For the past 25 years it has been widely used as both a dietary supplement and pharmaceutical product. 收起 | |
| Flaxseed Oil Organic 808110 | Bioriginal | Flaxseed Oil Organic 808110 is a clear to turbid yellow to dark yellow liquid oil. It is obtained from organic certified seeds and processes. The oil typically contains 55% ALA and has been long used for its beneficial effects on human health. The major ...展开 Flaxseed Oil Organic 808110 is a clear to turbid yellow to dark yellow liquid oil. It is obtained from organic certified seeds and processes. The oil typically contains 55% ALA and has been long used for its beneficial effects on human health. The major component of these beneficial effects is the Omega-3 fatty acid alpha-linolenic acid. 收起 | |
| Flaxseed Oil Organic Premium Taste 808150 | Bioriginal | Flaxseed Oil Organic Premium Taste 808150 is a clear to turbid yellow to dark yellow liquid oil with a faint odour is obtained from organic certified seeds and processes. The oil typically contains 55% ALA and does not have a bitter taste. ALA has an impo...展开 Flaxseed Oil Organic Premium Taste 808150 is a clear to turbid yellow to dark yellow liquid oil with a faint odour is obtained from organic certified seeds and processes. The oil typically contains 55% ALA and does not have a bitter taste. ALA has an important contribution to human health as witnessed by recently published health claims and dietary references values. 收起 | |
| Flaxseed Oil Refined 808130 | Bioriginal | Flaxseed Oil Refined 808130 is obtained by extraction and is fully refined. The oil typically contains 55% ALA. has been long used for its beneficial effects on human health due to the Omega-3 fatty acid alpha-linolenic acid. ALA has an important contribu...展开 Flaxseed Oil Refined 808130 is obtained by extraction and is fully refined. The oil typically contains 55% ALA. has been long used for its beneficial effects on human health due to the Omega-3 fatty acid alpha-linolenic acid. ALA has an important contribution to human health as witnessed by recently published health claims and dietary references values. 收起 | |
| Flaxseed Oil Virgin 808100 | Bioriginal | Flaxseed Oil Virgin 808100 is a clear or turbid yellow to dark yellow liquid oil with a typical odour. obtained using a low temperature process. The oil typically contains 55% ALA.has been long used for its beneficial effects on human health. Flax seed oi...展开 Flaxseed Oil Virgin 808100 is a clear or turbid yellow to dark yellow liquid oil with a typical odour. obtained using a low temperature process. The oil typically contains 55% ALA.has been long used for its beneficial effects on human health. Flax seed oil is very rich in alpha-linolenic acid (ALA), which is an essential Omega-3 fatty acid for humans. ALA has an important contribution to human health as witnessed by recently published health claims and dietary references values. 收起 | |
| FP Emulsion BioPure DHA® 450MG DHA Lemon | Bioriginal | A lemon flavoured emulsion with a yellow viscous liquid appearance and lemon odour. It is based on BioPure DHA®, delivering 450 mg of DHA per daily serving of 8 ml packaged in a 250 ml PET bottle. | |
| Natural 18/12 Fish Oil | Bioriginal | Natural 18/12 Fish Oil is a clear yellow liquid oil with a faint fish odour that is obtained from fatty fish typically, anchovies, sardines, mackerel and herring. The oil is fully refined, and contains a minimum of 18% EPA and 12% DHA and a minimum of 35%...展开 Natural 18/12 Fish Oil is a clear yellow liquid oil with a faint fish odour that is obtained from fatty fish typically, anchovies, sardines, mackerel and herring. The oil is fully refined, and contains a minimum of 18% EPA and 12% DHA and a minimum of 35% total omega-3. Natural 18/12 Fish Oil offers a milder flavor and aroma than before, with guaranteed purity. 收起 | |
| SILBIONE CAF 72576 RED | Elkem Silicones | SILBIONE CAF 72576 RED is a one component silicone rubber crosslinking at room temperature by reacting with the moisture in the air. These SILBIONE products contain reactive polydimethylsiloxane oils and inert fillers. The SILBIONE DISPERSIONS CAF 71550 a...展开 SILBIONE CAF 72576 RED is a one component silicone rubber crosslinking at room temperature by reacting with the moisture in the air. These SILBIONE products contain reactive polydimethylsiloxane oils and inert fillers. The SILBIONE DISPERSIONS CAF 71550 and 71528 are supplied as cyclohexane dispersions (70% solids). The SILBIONE DISPERSION CAF 71500G is supplied as cyclohexane dispersions (50% solids). The SILBIONE CAF 72576 is a 100% solids product. They can be used separately as non-stick coatings for materials in contact with foodstuffs. They can also be used in these applications in the form of a two-layer system which boosts their performance. The product obtained after crosslinking only contains substances that are in conformity with a number of Food Contact legislations. Contact BS for more detailed information. Important remarks: Manufacturers of paints, varnishes or coatings must naturally make sure that the other constituents in their formulas (solvents, pigments, additives, etc.) also comply with the regulations. They must also check that the coating obtained have been correctly applied, in particular to avoid any risk of migration of constituents. 收起 | |
| SILBIONE CAF 72589 | Elkem Silicones | SILBIONE CAF 72589 is a one component silicone elastomer, curing at room temperature on contact with atmospheric humidity, used to treat natural or agglomerated bottle corks. SILBIONE CAF 72589 is a solventless product based on reactive polymethyl siloxan...展开 SILBIONE CAF 72589 is a one component silicone elastomer, curing at room temperature on contact with atmospheric humidity, used to treat natural or agglomerated bottle corks. SILBIONE CAF 72589 is a solventless product based on reactive polymethyl siloxane oils and inert fillers. It can be used as a release coating for materials intended for food contact. 收起 | |
| SILBIONE DISPERSION CAF 70004 | Elkem Silicones | SILBIONE DISPERSION CAF 70004 is a one component silicone elastomer, curing at room temperature on contact with atmospheric humidity, used to treat agglomerated bottle corks and especially champagne corks. SILBIONE DISPERSION CAF 70004 is a product based ...展开 SILBIONE DISPERSION CAF 70004 is a one component silicone elastomer, curing at room temperature on contact with atmospheric humidity, used to treat agglomerated bottle corks and especially champagne corks. SILBIONE DISPERSION CAF 70004 is a product based on reactive polymethyl siloxane oils and inert fillers. It can be used as a release coating for materials intended for food contact. 收起 | |
| SILBIONE DISPERSION CAF 71500 GRY | Elkem Silicones | SILBIONE DISPERSION CAF 71500 GRY is a one component silicone rubber crosslinking at room temperature by reacting with the moisture in the air. These SILBIONE products contain reactive polydimethylsiloxane oils and inert fillers. The SILBIONE DISPERSIONS ...展开 SILBIONE DISPERSION CAF 71500 GRY is a one component silicone rubber crosslinking at room temperature by reacting with the moisture in the air. These SILBIONE products contain reactive polydimethylsiloxane oils and inert fillers. The SILBIONE DISPERSIONS CAF 71550 and 71528 are supplied as cyclohexane dispersions (70% solids). The SILBIONE DISPERSION CAF 71500G is supplied as cyclohexane dispersions (50% solids). The SILBIONE CAF 72576 is a 100% solids product. They can be used separately as non-stick coatings for materials in contact with foodstuffs. They can also be used in these applications in the form of a two-layer system which boosts their performance. The product obtained after crosslinking only contains substances that are in conformity with a number of Food Contact legislations. Contact BS for more detailed information. Important remarks: Manufacturers of paints, varnishes or coatings must naturally make sure that the other constituents in their formulas (solvents, pigments, additives, etc.) also comply with the regulations. They must also check that the coating obtained have been correctly applied, in particular to avoid any risk of migration of constituents. 收起 | |
| SILBIONE DISPERSION CAF 71528 | Elkem Silicones | SILBIONE DISPERSION CAF 71528 is a one component silicone rubber crosslinking at room temperature by reacting with the moisture in the air. These SILBIONE products contain reactive polydimethylsiloxane oils and inert fillers. The SILBIONE DISPERSIONS CAF ...展开 SILBIONE DISPERSION CAF 71528 is a one component silicone rubber crosslinking at room temperature by reacting with the moisture in the air. These SILBIONE products contain reactive polydimethylsiloxane oils and inert fillers. The SILBIONE DISPERSIONS CAF 71550 and 71528 are supplied as cyclohexane dispersions (70% solids). The SILBIONE DISPERSION CAF 71500G is supplied as cyclohexane dispersions (50% solids). The SILBIONE CAF 72576 is a 100% solids product. They can be used separately as non-stick coatings for materials in contact with foodstuffs. They can also be used in these applications in the form of a two-layer system which boosts their performance. The product obtained after crosslinking only contains substances that are in conformity with a number of Food Contact legislations. Contact BS for more detailed information. Important remarks: Manufacturers of paints, varnishes or coatings must naturally make sure that the other constituents in their formulas (solvents, pigments, additives, etc.) also comply with the regulations. They must also check that the coating obtained have been correctly applied, in particular to avoid any risk of migration of constituents. 收起 | |
| SILBIONE DISPERSION CAF 71550 | Elkem Silicones | SILBIONE DISPERSION CAF 71550 is a one component silicone rubber crosslinking at room temperature by reacting with the moisture in the air. These SILBIONE products contain reactive polydimethylsiloxane oils and inert fillers. The SILBIONE DISPERSIONS CAF ...展开 SILBIONE DISPERSION CAF 71550 is a one component silicone rubber crosslinking at room temperature by reacting with the moisture in the air. These SILBIONE products contain reactive polydimethylsiloxane oils and inert fillers. The SILBIONE DISPERSIONS CAF 71550 and 71528 are supplied as cyclohexane dispersions (70% solids). The SILBIONE DISPERSION CAF 71500G is supplied as cyclohexane dispersions (50% solids). The SILBIONE CAF 72576 is a 100% solids product. They can be used separately as non-stick coatings for materials in contact with foodstuffs. They can also be used in these applications in the form of a two-layer system which boosts their performance. The product obtained after crosslinking only contains substances that are in conformity with a number of Food Contact legislations. Contact BS for more detailed information. Important remarks: Manufacturers of paints, varnishes or coatings must naturally make sure that the other constituents in their formulas (solvents, pigments, additives, etc.) also comply with the regulations. They must also check that the coating obtained have been correctly applied, in particular to avoid any risk of migration of constituents. 收起 | |
| SILBIONE FLD 70047V100 | Elkem Silicones | SILBIONE FLD 70047 V 100, V 200 and V 350 are linear POLYDIMETHYLSILOXANES. | |
| SILBIONE FLD 70047V12 500 | Elkem Silicones | SILBIONE FLD 70047 V 12 500 to V 300 000 are linear POLYDIMETHYLSILOXANES. Refer to the regulatory attestation for the conformance to any regulated applications. | |
| SILBIONE FLD 70047V30 000 | Elkem Silicones | SILBIONE FLD 70047V30 000 is a linear POLYDIMETHYLSILOXANES. Refer to the regulatory attestation for the conformance to any regulated applications. | |
| SILBIONE FLD 70047V300 000 | Elkem Silicones | SILBIONE FLD 70047V300 000 is a linear POLYDIMETHYLSILOXANES. Refer to the regulatory attestation for the conformance to any regulated applications. | |
| SILBIONE PASTE 70428 | Elkem Silicones | SILBIONE PASTE 70428 is a mixture of polydimethylsiloxane oil and inert filler. This paste is recommended for lubricating installations and equipment to process or package foodstuffs. It can therefore, occasionally, be in contact with foodstuffs. The comp...展开 SILBIONE PASTE 70428 is a mixture of polydimethylsiloxane oil and inert filler. This paste is recommended for lubricating installations and equipment to process or package foodstuffs. It can therefore, occasionally, be in contact with foodstuffs. The composition of SILBIONE Paste 70428 meets the regulations in force in the following countries: FRANCE : Brochure n° 1 227 of the Journal Officiel de la République Française. For aqueous contact only. Tolerated provided the user checks that the paste does not penetrate into the foodstuffs and that if the machinery overheats it does not release any substances which might affect the foodstuff. NB: BLUESTAR SILICONES has checked, by heating SILBIONE Paste 70428 at 150°C for 24 hours, that the product does not release any toxic substances. Circular of 26 Mai 1971 on materials in contact with foodstuffs. GERMANY: Bundesgesundheitsamt Recommendations BGA chapter XV A on « Silicones ». Tolerated provided the user checks that the product does not affect either the odour or the taste of foodstuffs with which it might be in contact. USA: FDA Regulations under paragraph 178 3570 of the Code of Federal Regulations, part 21, on « Lubricants with incidental food contact ». For other countries, please consult us. 收起 | |
| SILBIONE PRIM 70073 | Elkem Silicones | SILBIONE PRIMER 70073 is an adhesion promoter for SILBIONE CAF and SILBIONE CAF DISPERSIONS (one component room temperature curing silicone elastomers). | |
| SILBIONE RES 76405 | Elkem Silicones | SILBIONE RESINE 76405 is a polymethylphenyl-siloxane resin supplied as 50% solution in toluene. SILBIONE RESINE 76405 is used as release coating for materials that will be in contact with foodstuff. This resin can also be used as a binder in paints develo...展开 SILBIONE RESINE 76405 is a polymethylphenyl-siloxane resin supplied as 50% solution in toluene. SILBIONE RESINE 76405 is used as release coating for materials that will be in contact with foodstuff. This resin can also be used as a binder in paints developed to protect and decorate these materials. The products obtained after crosslinking of SILBIONE RESINE 76405 contain only substances permitted by the Food Contact regulations currently in force. Contact BS for more detailed information. Important remarks: Manufacturers of paints, varnishes or coatings must naturally make sure that the other constituents in their formulas (solvents, pigments, additives, etc.) also comply with the regulations. They must also check that the coatings obtained have been correctly applied, in particular to avoid any risk of migration of constituents. 收起 | |
| SILCOLAPSE 7140 | Elkem Silicones | SILCOLAPSE 7140 is a non-ionic aqueous emulsion containing dimethylpoly- siloxane, and is highly effective for prevention, control and elimination of foam in aqueous media. SILCOLAPSE 7140 has many applications in food industry. It can also be used in ind...展开 SILCOLAPSE 7140 is a non-ionic aqueous emulsion containing dimethylpoly- siloxane, and is highly effective for prevention, control and elimination of foam in aqueous media. SILCOLAPSE 7140 has many applications in food industry. It can also be used in industrial applications requiring a high level of purity. 收起 | |
| SILCOLEASE ADD 702 | Elkem Silicones | SILCOLEASE ADD 702 is a white, granular powder, freely soluble in water and possessing a slight odour of ammonia. It is used with emulsion SILCOLEASE polyaddition or polycondensation release systems to improve hold-out of the silicone. | |
| SILCOLEASE EMUL RCA 954 | Elkem Silicones | SILCOLEASE EMULSION RCA 954 is a non ionic aqueous emulsion. It is used as a tight release additive in emulsion paper coating applications and serves to increase the peeling force required to separate the pressure sensitive adhesive from the siliconised r...展开 SILCOLEASE EMULSION RCA 954 is a non ionic aqueous emulsion. It is used as a tight release additive in emulsion paper coating applications and serves to increase the peeling force required to separate the pressure sensitive adhesive from the siliconised release liner. This RCA emulsion is used as a RCA in polyaddition type emulsions in the SILCOLEASE range. 收起 | |
| SILCOLEASE EMULSION 902 | Elkem Silicones | SILCOLEASE EMULSION 902 is a SILICONE EMULSION intended for the RELEASE COATING OF PAPERS and various other substrates. SILCOLEASE EMULSION 902 cures by a polyaddition reaction in the presence of an organometallic compound forming an ELASTOMERIC COATING. ...展开 SILCOLEASE EMULSION 902 is a SILICONE EMULSION intended for the RELEASE COATING OF PAPERS and various other substrates. SILCOLEASE EMULSION 902 cures by a polyaddition reaction in the presence of an organometallic compound forming an ELASTOMERIC COATING. The release properties of the coatings can be modified as required. 收起 | |
| SILCOLEASE EMULSION 907 | Elkem Silicones | SILCOLEASE EMULSION 907 is a SILICONE EMULSION and is used as the base polymer in a three part formulation intended for the RELEASE COATING OF PAPERS, and various other substrates. SILCOLEASE EMULSION 907 cures by a polyaddition reaction in the presence o...展开 SILCOLEASE EMULSION 907 is a SILICONE EMULSION and is used as the base polymer in a three part formulation intended for the RELEASE COATING OF PAPERS, and various other substrates. SILCOLEASE EMULSION 907 cures by a polyaddition reaction in the presence of suitable emulsions of crosslinker and an organometallic catalyst, for example (e.g. SILCOLEASE EMULSION XL 969 and SILCOLEASE EMULSION CATA 903) to give an ELASTOMERIC type coating. It may be used to coat substrates that meet “food contact application” requirements. 收起 | |
| SILCOLEASE EMULSION 908 | Elkem Silicones | SILCOLEASE EMULSION 908 is a SILICONE EMULSION intended for the RELEASE COATING OF PAPERS and various other substrates. SILCOLEASE EMULSION 908 cures by a polyaddition reaction in the presence of an organometallic catalyst, for example SILCOLEASE EMULSION...展开 SILCOLEASE EMULSION 908 is a SILICONE EMULSION intended for the RELEASE COATING OF PAPERS and various other substrates. SILCOLEASE EMULSION 908 cures by a polyaddition reaction in the presence of an organometallic catalyst, for example SILCOLEASE EMULSION CATALYST 903, producing an ELASTOMERIC COATING. The release properties of the coatings can be modified as required. 收起 | |
| SILCOLEASE EMULSION 912 | Elkem Silicones | SILCOLEASE EMULSION 912 is a silicone emulsion intended for the release coating of papers and various other substrates. SILCOLEASE EMULSION 912 cures by a polyaddition reaction in the presence of an organometallic catalyst, for example SILCOLEASE EMULSION...展开 SILCOLEASE EMULSION 912 is a silicone emulsion intended for the release coating of papers and various other substrates. SILCOLEASE EMULSION 912 cures by a polyaddition reaction in the presence of an organometallic catalyst, for example SILCOLEASE EMULSION CATALYST 913 producing an elastomeric coating. The release properties of the coatings can be modified as required. 收起 | |
| SILCOLEASE EMULSION 915 | Elkem Silicones | SILCOLEASE EMULSION 915 is a silicone emulsion intended for the release coating of papers and various other substrates. SILCOLEASE EMULSION 915 cures by a polyaddition reaction in the presence of an organometallic compound forming an elastomeric coating. ...展开 SILCOLEASE EMULSION 915 is a silicone emulsion intended for the release coating of papers and various other substrates. SILCOLEASE EMULSION 915 cures by a polyaddition reaction in the presence of an organometallic compound forming an elastomeric coating. The release properties of the coatings can be modified as required. 收起 | |
| SILCOLEASE EMULSION 925 | Elkem Silicones | SILCOLEASE EMUL 925 is a silicone emulsion intended for the release coating of papers and various other substrates. SILCOLEASE EMUL 925 cures by a polyaddition reaction in the presence of an organometallic catalyst, for example SILCOLEASE EMULSION CATALYS...展开 SILCOLEASE EMUL 925 is a silicone emulsion intended for the release coating of papers and various other substrates. SILCOLEASE EMUL 925 cures by a polyaddition reaction in the presence of an organometallic catalyst, for example SILCOLEASE EMULSION CATALYST 903, producing an elastomeric coating. The release properties of the coatings can be modified as required. 收起 | |
| SILCOLEASE EMULSION CATA 903 | Elkem Silicones | SILCOLEASE EMULSION CATALYST 903 is an emulsion of reactive silicone polymers combined with an organometallic catalyst. It is an EMULSION CATALYST to be used in conjunction with a silicone emulsion intended for RELEASE COATING OF PAPERS and various substr...展开 SILCOLEASE EMULSION CATALYST 903 is an emulsion of reactive silicone polymers combined with an organometallic catalyst. It is an EMULSION CATALYST to be used in conjunction with a silicone emulsion intended for RELEASE COATING OF PAPERS and various substrates, for example SILCOLEASE EMULSION 908. It is recommended uniquely for the catalysis of polyaddition type reactions. 收起 | |
| SILCOLEASE EMULSION CATA 909 | Elkem Silicones | SILCOLEASE EMULSION CATA 909 a non-ionic aqueous emulsion of polymethylsiloxane grafted with reactive chemicals with the addition of a Platinum salt. It is used as an emulsion catalyst for the range of SILCOLEASE EMULSIONS to obtain a non-migratory releas...展开 SILCOLEASE EMULSION CATA 909 a non-ionic aqueous emulsion of polymethylsiloxane grafted with reactive chemicals with the addition of a Platinum salt. It is used as an emulsion catalyst for the range of SILCOLEASE EMULSIONS to obtain a non-migratory release coating for flexible substrates such as papers and films. 收起 | |
| SILCOLEASE EMULSION CATA 911 | Elkem Silicones | SILCOLEASE EMULSION CATA 911 is an emulsion of reactive silicone polymers combined with an organometallic catalyst. It is an emulsion catalyst to be used in conjunction with a silicone emulsion intended for release coating of papers and various substrates...展开 SILCOLEASE EMULSION CATA 911 is an emulsion of reactive silicone polymers combined with an organometallic catalyst. It is an emulsion catalyst to be used in conjunction with a silicone emulsion intended for release coating of papers and various substrates, for example SILCOLEASE EMULSION 915. It only catalyses polyaddition type reactions. 收起 | |
| SILCOLEASE EMULSION XL 966 | Elkem Silicones | SILCOLEASE EMULSION CROSSLINKER 966 is a silicone emulsion that can be used as a CROSSLINKER for polyaddition and polycondensation emulsions in the SILCOLEASE range. | |
| SILCOLEASE EMULSION XL 968 | Elkem Silicones | SILCOLEASE EMULSION XL 968 is a silicone emulsion that can be used as a CROSSLINKER for polyaddition and polycondensation emulsions in the SILCOLEASE range. | |
| SILCOLEASE EMULSION XL 969 | Elkem Silicones | SILCOLEASE EMULSION XL 969 is a silicone emulsion that can be used as a CROSSLINKER for polyaddition and polycondensation emulsions in the SILCOLEASE range. | |
| SILCOLEASE HA 1 | Elkem Silicones | SILCOLEASE HA-1 is a water-based additive. It is used with emulsion. SILCOLEASE polyaddition or polycondensation release systems to improve hold-out of the silicone. | |
| SILCOLEASE PC-105NXL | Elkem Silicones | SILCOLEASE PC-105NXL is a thermally curable silicone emulsion which provides an easy release surface for adhesives and other tacky materials such as pressure sensitive tapes, labels, asphalt shingle wrap, and food packaging. SILCOLEASE PC-105NXL is an e...展开 SILCOLEASE PC-105NXL is a thermally curable silicone emulsion which provides an easy release surface for adhesives and other tacky materials such as pressure sensitive tapes, labels, asphalt shingle wrap, and food packaging. SILCOLEASE PC-105NXL is an emulsion of a low vinyl content silicone fluid but without the methyl hydrogen siloxane crosslinker pre-added. As such, SILCOLEASE PC-105NXL offers the flexibility to the formulator of being able to modify the type or the amount of crosslinker to achieve special performance characteristics. A platinum catalyst emulsion is also required. Release modifier emulsions are available which, when blended with SILCOLEASE PC-105NXL in incrementally higher levels, will give correspondingly tighter release force performance. A platinum catalyst emulsion is also required. 收起 | |
| SILCOLEASE PC-107 | Elkem Silicones | SILCOLEASE PC-107 is a thermally curable silicone emulsion which provides a premium release surface for adhesive and other tacky materials such as pressure sensitive tapes, labels, asphalt shingle wrap, and food packaging. Release modifier emulsions are a...展开 SILCOLEASE PC-107 is a thermally curable silicone emulsion which provides a premium release surface for adhesive and other tacky materials such as pressure sensitive tapes, labels, asphalt shingle wrap, and food packaging. Release modifier emulsions are available which, when blended with SILCOLEASEPC-107 in incrementally higher levels, will give correspondingly tighter release force performance. SILCOLEASE PC-107 NXL is identical in composition to SILCOLEASEPC-107 but without methyl hydrogen crosslinker. As such, SILCOLEASEPC-107 NXL offers the flexibility to the formulator to modify the type and / or the amount of crosslinker to achieve specific performance characteristics. A platinum catalyst emulsion is required for each. 收起 | |
| SILCOLEASE PC-107 NXL | Elkem Silicones | SILCOLEASE PC-107 is a thermally curable silicone emulsion which provides a premium release surface for adhesive and other tacky materials such as pressure sensitive tapes, labels, asphalt shingle wrap, and food packaging. Release modifier emulsions are a...展开 SILCOLEASE PC-107 is a thermally curable silicone emulsion which provides a premium release surface for adhesive and other tacky materials such as pressure sensitive tapes, labels, asphalt shingle wrap, and food packaging. Release modifier emulsions are available which, when blended with SILCOLEASEPC-107 in incrementally higher levels, will give correspondingly tighter release force performance. SILCOLEASE PC-107 NXL is identical in composition to SILCOLEASEPC-107 but without methyl hydrogen crosslinker. As such, SILCOLEASEPC-107 NXL offers the flexibility to the formulator to modify the type and / or the amount of crosslinker to achieve specific performance characteristics. A platinum catalyst emulsion is required for each. 收起 | |
| SILCOLEASE PC-188 | Elkem Silicones | SILCOLEASE PC-188 is a thermally curable silicone emulsion which provides a premium release surface for adhesive and other tacky materials such as pressure sensitive tapes, labels, asphalt shingle wrap, and food packaging. Release modifier emulsions are a...展开 SILCOLEASE PC-188 is a thermally curable silicone emulsion which provides a premium release surface for adhesive and other tacky materials such as pressure sensitive tapes, labels, asphalt shingle wrap, and food packaging. Release modifier emulsions are available which, when blended with Silcolease ® PC-188 in incrementally higher levels, will give correspondingly tighter release force performance. Silcolease ® PC-188NXL is identical in composition to Silcolease ® PC-188 but without methyl hydrogen crosslinker. As such, Silcolease ® PC-188NXL offers the flexibility to the formulator to modify the type and / or the amount of crosslinker to achieve specific performance characteristics. A platinum catalyst emulsion is required for each. 收起 | |
| SILCOLEASE PC-188NXL | Elkem Silicones | SILCOLEASE PC-188 is a thermally curable silicone emulsion which provides a premium release surface for adhesive and other tacky materials such as pressure sensitive tapes, labels, asphalt shingle wrap, and food packaging. Release modifier emulsions are a...展开 SILCOLEASE PC-188 is a thermally curable silicone emulsion which provides a premium release surface for adhesive and other tacky materials such as pressure sensitive tapes, labels, asphalt shingle wrap, and food packaging. Release modifier emulsions are available which, when blended with Silcolease ®PC-188 in incrementally higher levels, will give correspondingly tighter release force performance. Silcolease ® PC-188NXL is identical in composition to Silcolease ®PC-188 but without methyl hydrogen crosslinker. As such, Silcolease ®PC-188NXL offers the flexibility to the formulator to modify the type and / or the amount of crosslinker to achieve specific performance characteristics. A platinum catalyst emulsion is required for each. 收起 | |
| SILCOLEASE PC-191 | Elkem Silicones | SILCOLEASE PC-191 is a release modifier designed to give incrementally higher levels of release when added to the easy release formulations. SILCOLEASE PC- 191 may be used at 0% through 100% of the polymer component with release values increasing proporti...展开 SILCOLEASE PC-191 is a release modifier designed to give incrementally higher levels of release when added to the easy release formulations. SILCOLEASE PC- 191 may be used at 0% through 100% of the polymer component with release values increasing proportionally as the level of SILCOLEASE PC-191 is increased in the formulation. Unlike traditional tight release additives which are based on vinyl functional siloxane resins, SILCOLEASE PC-191 is based on hydride functionality. As a result, SILCOLEASE PC-191 may offer greater efficiency in affecting release response than the vinyl functional counterparts. 收起 | |
| SILCOLEASE PC-195NXL | Elkem Silicones | SILCOLEASE PC-195NXL is a polyaddition release modifier designed to give incrementally higher levels of release when added to easy release formulations. SILCOLEASE PC-195NXL may be used at 0% through 100% of the emulsion component with release values incr...展开 SILCOLEASE PC-195NXL is a polyaddition release modifier designed to give incrementally higher levels of release when added to easy release formulations. SILCOLEASE PC-195NXL may be used at 0% through 100% of the emulsion component with release values increasing proportionally as the level of SILCOLEASE PC-195NXL is increased. Additionally, when SILCOLEASE PC-195NXL is used at or near 100% of the polymer blend, very high release levels are achievable with both rubber based and acrylic adhesives. 收起 | |
| SILCOLEASE PC-197 | Elkem Silicones | SILCOLEASE PC-197 is a release modifier designed to provide incrementally higher levels of release when added to easy release emulsion formulations. SILCOLEASEPC-197 may be used at 0% through 100% of the polymer component with release values increasing ...展开 SILCOLEASE PC-197 is a release modifier designed to provide incrementally higher levels of release when added to easy release emulsion formulations. SILCOLEASEPC-197 may be used at 0% through 100% of the polymer component with release values increasing proportionally as the amount of SILCOLEASEPC-197 is increased in the formulation. SILCOLEASE PC-197 is based on a vinyl functional siloxane resin. 收起 | |
| SILCOLEASE PC-31 | Elkem Silicones | SILCOLEASE PC-31 is an emulsion of methyl hydrogen polysiloxane crosslinker for use with both platinum catalyzed addition cure and tin catalyzed condensation cure emulsion release coatings. The methyl hydrogen polysiloxane in SILCOLEASE PC-31 is a copolym...展开 SILCOLEASE PC-31 is an emulsion of methyl hydrogen polysiloxane crosslinker for use with both platinum catalyzed addition cure and tin catalyzed condensation cure emulsion release coatings. The methyl hydrogen polysiloxane in SILCOLEASE PC-31 is a copolymer, while SILCOLEASE PC-868 is based on a methyl hydrogen polysiloxane homopolymer. SILCOLEASE PC-50 is a proprietary blend of two methyl hydrogen crosslinkers and is especially suited to work with troublesome substrates to provide superb anchorage of the cured silicone coating. The homopolymer and copolymer crosslinkers provide the flexibility of creating a range of crosslink matrices from a dense, tightly knit matrix to one that is comparatively open. With troublesome adhesives or substrates, release and anchorage improvements may be realized by an interchange of crosslinkers. 收起 | |
| SILCOLEASE PC-868 | Elkem Silicones | SILCOLEASE PC-868 is an emulsion of methyl hydrogen polysiloxane crosslinker for use with both platinum catalyzed addition cure and tin catalyzed condensation cure emulsion release coatings. The methyl hydrogen polysiloxane in SILCOLEASE PC-31 is a copoly...展开 SILCOLEASE PC-868 is an emulsion of methyl hydrogen polysiloxane crosslinker for use with both platinum catalyzed addition cure and tin catalyzed condensation cure emulsion release coatings. The methyl hydrogen polysiloxane in SILCOLEASE PC-31 is a copolymer, while SILCOLEASE PC-868 is based on a methyl hydrogen polysiloxane homopolymer. SILCOLEASE PC-50 is a proprietary blend of two methyl hydrogen crosslinkers and is especially suited to work with troublesome substrates to provide superb anchorage of the cured silicone coating. The homopolymer and copolymer crosslinkers provide the flexibility of creating a range of crosslink matrices from a dense, tightly knit matrix to one that is comparatively open. With troublesome adhesives or substrates, release and anchorage improvements may be realized by an interchange of crosslinkers. 收起 | |
| SILCOLEASE PC-95 | Elkem Silicones | SILCOLEASE PC-95 is an emulsion of a proprietary platinum complex with low volatile components and specially formulated to reduce “dust” formation in curing ovens. SILCOLEASE PC-95 is the catalyst component of emulsion silicone release coatings and promot...展开 SILCOLEASE PC-95 is an emulsion of a proprietary platinum complex with low volatile components and specially formulated to reduce “dust” formation in curing ovens. SILCOLEASE PC-95 is the catalyst component of emulsion silicone release coatings and promotes polymerization through a polyaddition reaction. When properly formulated with a release polymer emulsion, SILCOLEASE PC-95 provides a thermally curable release coating for paper substrates. 收起 | |
| SILCOLEASE XL PC-50 | Elkem Silicones | SILCOLEASE PC-50 is an emulsion of methyl hydrogen polysiloxane crosslinker for use with both platinum catalyzed addition cure and tin catalyzed condensation cure emulsion release coatings. The methyl hydrogen polysiloxane in SILCOLEASE PC-31 is a copolym...展开 SILCOLEASE PC-50 is an emulsion of methyl hydrogen polysiloxane crosslinker for use with both platinum catalyzed addition cure and tin catalyzed condensation cure emulsion release coatings. The methyl hydrogen polysiloxane in SILCOLEASE PC-31 is a copolymer, while SILCOLEASE PC-868 is based on a methyl hydrogen polysiloxane homopolymer. SILCOLEASE PC-50 is a proprietary blend of two methyl hydrogen crosslinkers and is especially suited to work with troublesome substrates to provide superb anchorage of the cured silicone coating. The homopolymer and copolymer crosslinkers provide the flexibility of creating a range of crosslink matrices from a dense, tightly knit matrix to one that is comparatively open. With troublesome adhesives or substrates, release and anchorage improvements may be realized by an interchange of crosslinkers. 收起 |
