| BURGESS NO. 10 | Burgess Pigment Company | BURGESS NO. 10 is a fine particle size, medium brightness hydrous kaolin clay. This product exhibits dispersion in water based, acid pH, alkyd, or solvent based coatings and inks, electrodeposition body primers, as well as EIFS. | |
| BURGESS NO. 17 | Burgess Pigment Company | BURGESS NO. 17 is a fine particle size, high brightness hydrous kaolin clay used to extend TiO2 in semigloss paints and inks. This product is well ground, has excellent whiteness and dispersion, and high brightness. | |
| BURGESS NO. 60 | Burgess Pigment Company | BURGESS NO. 60 is an acid pH, fine particle size, medium brightness hydrous kaolin clay with excellent dispersion properties. This product is used in inks, adhesives and industrial finishes, electrostatic deposition body primers, and EIFS. | |
| BURGESS POLYCLAY | Burgess Pigment Company | BURGESS POLYCLAY is a fine particle size, medium brightness hydrous kaolin clay used in inks. | |
| C Glass Flake GF007/C | Glassflake Ltd | C Glass Flake GF007/C is a corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of Av. 5 +/- 2 microns. The manufacturing process utilized by this flake differs from the normal spun-glass method, resulting i...展开 C Glass Flake GF007/C is a corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of Av. 5 +/- 2 microns. The manufacturing process utilized by this flake differs from the normal spun-glass method, resulting in a wider thickness specification. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| C Glass Flake GF750/C | Glassflake Ltd | C Glass Flake GF750/C is a corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of Av. 5 +/- 2 microns. The manufacturing process utilized by this flake differs from the normal spun-glass method, resulting i...展开 C Glass Flake GF750/C is a corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of Av. 5 +/- 2 microns. The manufacturing process utilized by this flake differs from the normal spun-glass method, resulting in a wider thickness specification. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| C Glass Flake GF750MC | Glassflake Ltd | C Glass Flake GF750MC is a corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of Av. 5 +/-2 microns. The manufacturing process utilized by this flake differs from the normal spun-glass method, resulting in...展开 C Glass Flake GF750MC is a corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of Av. 5 +/-2 microns. The manufacturing process utilized by this flake differs from the normal spun-glass method, resulting in a wider thickness specification. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| Copper Chromite Black P2028 | Dongguan Hailerui Chemical Co., Ltd. | Copper Chromite Black P2028 is an inorganic pigment that appears as a black powder. This product has an oil absorption of 17-26 and a moisture content of <0.2%. It can be used in high temperature inks and paints. | |
| Cosmic Black 2172 | Ebonex Corp. | Cosmic Black 2172 is a pigment made from "Bone Black". Bone black is a natural black pigment created by destructive distillation of animal bones in the absence of oxygen. The subsequent pigment is created by crushing the bone char and screening it into va...展开 Cosmic Black 2172 is a pigment made from "Bone Black". Bone black is a natural black pigment created by destructive distillation of animal bones in the absence of oxygen. The subsequent pigment is created by crushing the bone char and screening it into various sizes, which range from 0.3 to 44 microns. These intermediary products are then custom blended to create a wide variety of shades which are suitable for many different applications. Some area applications are artist colors, paper products, paints and lacquers, leathers and vinyls, and plastics. 收起 | |
| Cosmic Black 300 | Ebonex Corp. | Cosmic Black 300 is a pigment made from "Bone Black". Bone black is a natural black pigment created by destructive distillation of animal bones in the absence of oxygen. The subsequent pigment is created by crushing the bone char and screening it into var...展开 Cosmic Black 300 is a pigment made from "Bone Black". Bone black is a natural black pigment created by destructive distillation of animal bones in the absence of oxygen. The subsequent pigment is created by crushing the bone char and screening it into various sizes, which range from 0.3 to 44 microns. These intermediary products are then custom blended to create a wide variety of shades which are suitable for many different applications. Some area applications are artist colors, paper products, paints and lacquers, leathers and vinyls, and plastics. 收起 | |
| Cosmic Black 500 WB | Ebonex Corp. | Cosmic Black 500 WB is a pigment made from "Bone Black". Bone black is a natural black pigment created by destructive distillation of animal bones in the absence of oxygen. The subsequent pigment is created by crushing the bone char and screening it into ...展开 Cosmic Black 500 WB is a pigment made from "Bone Black". Bone black is a natural black pigment created by destructive distillation of animal bones in the absence of oxygen. The subsequent pigment is created by crushing the bone char and screening it into various sizes, which range from 0.3 to 44 microns. These intermediary products are then custom blended to create a wide variety of shades which are suitable for many different applications. Some area applications are artist colors, paper products, paints and lacquers, leathers and vinyls, and plastics. 收起 | |
| Cosmic Black 6 | Ebonex Corp. | Cosmic Black 6 is a pigment made from "Bone Black". Bone black is a natural black pigment created by destructive distillation of animal bones in the absence of oxygen. The subsequent pigment is created by crushing the bone char and screening it into vario...展开 Cosmic Black 6 is a pigment made from "Bone Black". Bone black is a natural black pigment created by destructive distillation of animal bones in the absence of oxygen. The subsequent pigment is created by crushing the bone char and screening it into various sizes, which range from 0.3 to 44 microns. These intermediary products are then custom blended to create a wide variety of shades which are suitable for many different applications. Some area applications are artist colors, paper products, paints and lacquers, leathers and vinyls, and plastics. 收起 | |
| Cosmic Black 7 | Ebonex Corp. | Cosmic Black 7 is a pigment made from "Bone Black". Bone black is a natural black pigment created by destructive distillation of animal bones in the absence of oxygen. The subsequent pigment is created by crushing the bone char and screening it into vario...展开 Cosmic Black 7 is a pigment made from "Bone Black". Bone black is a natural black pigment created by destructive distillation of animal bones in the absence of oxygen. The subsequent pigment is created by crushing the bone char and screening it into various sizes, which range from 0.3 to 44 microns. These intermediary products are then custom blended to create a wide variety of shades which are suitable for many different applications. Some area applications are artist colors, paper products, paints and lacquers, leathers and vinyls, and plastics. 收起 | |
| Cosmic Black AP | Ebonex Corp. | Cosmic Black AP is a pigment made from "Bone Black". Bone black is a natural black pigment created by destructive distillation of animal bones in the absence of oxygen. The subsequent pigment is created by crushing the bone char and screening it into vari...展开 Cosmic Black AP is a pigment made from "Bone Black". Bone black is a natural black pigment created by destructive distillation of animal bones in the absence of oxygen. The subsequent pigment is created by crushing the bone char and screening it into various sizes, which range from 0.3 to 44 microns. These intermediary products are then custom blended to create a wide variety of shades which are suitable for many different applications. Some area applications are artist colors, paper products, paints and lacquers, leathers and vinyls, and plastics. 收起 | |
| Cosmic Black CEM | Ebonex Corp. | Cosmic Black CEM is a pigment made from "Bone Black". Bone black is a natural black pigment created by destructive distillation of animal bones in the absence of oxygen. The subsequent pigment is created by crushing the bone char and screening it into var...展开 Cosmic Black CEM is a pigment made from "Bone Black". Bone black is a natural black pigment created by destructive distillation of animal bones in the absence of oxygen. The subsequent pigment is created by crushing the bone char and screening it into various sizes, which range from 0.3 to 44 microns. These intermediary products are then custom blended to create a wide variety of shades which are suitable for many different applications. Some area applications are artist colors, paper products, paints and lacquers, leathers and vinyls, and plastics. 收起 | |
| Cosmic Black D-2 | Ebonex Corp. | Cosmic Black D-2 is a pigment made from "Bone Black". Bone black is a natural black pigment created by destructive distillation of animal bones in the absence of oxygen. The subsequent pigment is created by crushing the bone char and screening it into var...展开 Cosmic Black D-2 is a pigment made from "Bone Black". Bone black is a natural black pigment created by destructive distillation of animal bones in the absence of oxygen. The subsequent pigment is created by crushing the bone char and screening it into various sizes, which range from 0.3 to 44 microns. These intermediary products are then custom blended to create a wide variety of shades which are suitable for many different applications. Some area applications are artist colors, paper products, paints and lacquers, leathers and vinyls, and plastics. 收起 | |
| Cosmic Black D-Special | Ebonex Corp. | Cosmic Black D-Special is a pigment made from "Bone Black". Bone black is a natural black pigment created by destructive distillation of animal bones in the absence of oxygen. The subsequent pigment is created by crushing the bone char and screening it in...展开 Cosmic Black D-Special is a pigment made from "Bone Black". Bone black is a natural black pigment created by destructive distillation of animal bones in the absence of oxygen. The subsequent pigment is created by crushing the bone char and screening it into various sizes, which range from 0.3 to 44 microns. These intermediary products are then custom blended to create a wide variety of shades which are suitable for many different applications. Some area applications are artist colors, paper products, paints and lacquers, leathers and vinyls, and plastics. 收起 | |
| Cosmic Black DB | Ebonex Corp. | Cosmic Black DB is a pigment made from "Bone Black". Bone black is a natural black pigment created by destructive distillation of animal bones in the absence of oxygen. The subsequent pigment is created by crushing the bone char and screening it into vari...展开 Cosmic Black DB is a pigment made from "Bone Black". Bone black is a natural black pigment created by destructive distillation of animal bones in the absence of oxygen. The subsequent pigment is created by crushing the bone char and screening it into various sizes, which range from 0.3 to 44 microns. These intermediary products are then custom blended to create a wide variety of shades which are suitable for many different applications. Some area applications are artist colors, paper products, paints and lacquers, leathers and vinyls, and plastics. 收起 | |
| Cosmic Black FCG-1 | Ebonex Corp. | Cosmic Black FCG-1 is a pigment made from "Bone Black". Bone black is a natural black pigment created by destructive distillation of animal bones in the absence of oxygen. The subsequent pigment is created by crushing the bone char and screening it into v...展开 Cosmic Black FCG-1 is a pigment made from "Bone Black". Bone black is a natural black pigment created by destructive distillation of animal bones in the absence of oxygen. The subsequent pigment is created by crushing the bone char and screening it into various sizes, which range from 0.3 to 44 microns. These intermediary products are then custom blended to create a wide variety of shades which are suitable for many different applications. Some area applications are artist colors, paper products, paints and lacquers, leathers and vinyls, and plastics. 收起 | |
| Cosmic Black H-4 | Ebonex Corp. | Cosmic Black H-4 is a pigment made from "Bone Black". Bone black is a natural black pigment created by destructive distillation of animal bones in the absence of oxygen. The subsequent pigment is created by crushing the bone char and screening it into var...展开 Cosmic Black H-4 is a pigment made from "Bone Black". Bone black is a natural black pigment created by destructive distillation of animal bones in the absence of oxygen. The subsequent pigment is created by crushing the bone char and screening it into various sizes, which range from 0.3 to 44 microns. These intermediary products are then custom blended to create a wide variety of shades which are suitable for many different applications. Some area applications are artist colors, paper products, paints and lacquers, leathers and vinyls, and plastics. 收起 | |
| Cosmic Black H-6 | Ebonex Corp. | Cosmic Black H-6 is a pigment made from "Bone Black". Bone black is a natural black pigment created by destructive distillation of animal bones in the absence of oxygen. The subsequent pigment is created by crushing the bone char and screening it into var...展开 Cosmic Black H-6 is a pigment made from "Bone Black". Bone black is a natural black pigment created by destructive distillation of animal bones in the absence of oxygen. The subsequent pigment is created by crushing the bone char and screening it into various sizes, which range from 0.3 to 44 microns. These intermediary products are then custom blended to create a wide variety of shades which are suitable for many different applications. Some area applications are artist colors, paper products, paints and lacquers, leathers and vinyls, and plastics. 收起 | |
| Cosmic Black H-7 | Ebonex Corp. | Cosmic Black H-7 is a pigment made from "Bone Black". Bone black is a natural black pigment created by destructive distillation of animal bones in the absence of oxygen. The subsequent pigment is created by crushing the bone char and screening it into var...展开 Cosmic Black H-7 is a pigment made from "Bone Black". Bone black is a natural black pigment created by destructive distillation of animal bones in the absence of oxygen. The subsequent pigment is created by crushing the bone char and screening it into various sizes, which range from 0.3 to 44 microns. These intermediary products are then custom blended to create a wide variety of shades which are suitable for many different applications. Some area applications are artist colors, paper products, paints and lacquers, leathers and vinyls, and plastics. 收起 | |
| Dispersion Agent BLK-9918 | BELIKE Chemical Co.,Ltd. | Dispersion Agent BLK-9918 is a coating additive that is in the form of a yellow or brown liquid. This product is most commonly used as a dispersion agent in water-based paint, inks, and water-based acrylic resins. | |
| Ebonex 1047 | Ebonex Corp. | Ebonex 1047 is a pigment made from "Bone Black". Bone black is a natural black pigment created by destructive distillation of animal bones in the absence of oxygen. The subsequent pigment is created by crushing the bone char and screening it into various ...展开 Ebonex 1047 is a pigment made from "Bone Black". Bone black is a natural black pigment created by destructive distillation of animal bones in the absence of oxygen. The subsequent pigment is created by crushing the bone char and screening it into various sizes, which range from 0.3 to 44 microns. These intermediary products are then custom blended to create a wide variety of shades which are suitable for many different applications. Some area applications are artist colors, paper products, paints and lacquers, leathers and vinyls, and plastics. 收起 | |
| Ebonex 3D | Ebonex Corp. | Ebonex 3D is a pigment made from "Bone Black". Bone black is a natural black pigment created by destructive distillation of animal bones in the absence of oxygen. The subsequent pigment is created by crushing the bone char and screening it into various si...展开 Ebonex 3D is a pigment made from "Bone Black". Bone black is a natural black pigment created by destructive distillation of animal bones in the absence of oxygen. The subsequent pigment is created by crushing the bone char and screening it into various sizes, which range from 0.3 to 44 microns. These intermediary products are then custom blended to create a wide variety of shades which are suitable for many different applications. Some area applications are artist colors, paper products, paints and lacquers, leathers and vinyls, and plastics. 收起 | |
| Ebonex SC-5 | Ebonex Corp. | Ebonex SC-5 is a pigment made from "Bone Black". Bone black is a natural black pigment created by destructive distillation of animal bones in the absence of oxygen. The subsequent pigment is created by crushing the bone char and screening it into various ...展开 Ebonex SC-5 is a pigment made from "Bone Black". Bone black is a natural black pigment created by destructive distillation of animal bones in the absence of oxygen. The subsequent pigment is created by crushing the bone char and screening it into various sizes, which range from 0.3 to 44 microns. These intermediary products are then custom blended to create a wide variety of shades which are suitable for many different applications. Some area applications are artist colors, paper products, paints and lacquers, leathers and vinyls, and plastics. 收起 | |
| ECR Glass Flake GF001 | Glassflake Ltd | ECR Glass Flake GF001 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.0 - 1.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties a...展开 ECR Glass Flake GF001 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.0 - 1.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF002 | Glassflake Ltd | ECR Glass Flake GF002 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.3 - 2.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties a...展开 ECR Glass Flake GF002 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.3 - 2.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF003 | Glassflake Ltd | ECR Glass Flake GF003 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 2.3 - 3.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties a...展开 ECR Glass Flake GF003 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 2.3 - 3.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF005 | Glassflake Ltd | ECR Glass Flake GF005 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 3.5 - 5.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties ...展开 ECR Glass Flake GF005 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 3.5 - 5.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF007 | Glassflake Ltd | ECR Glass Flake GF007 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 5.5 - 9.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties a...展开 ECR Glass Flake GF007 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 5.5 - 9.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF100M (Milled) | Glassflake Ltd | ECR Glass Flake GF100M (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.0 - 1.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pr...展开 ECR Glass Flake GF100M (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.0 - 1.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF100M (Unmilled) | Glassflake Ltd | ECR Glass Flake GF100 (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.0 - 1.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier p...展开 ECR Glass Flake GF100 (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.0 - 1.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF100nm (Unmilled) | Glassflake Ltd | ECR Glass Flake GF100nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.100nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pr...展开 ECR Glass Flake GF100nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.100nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF100nmM (Milled) | Glassflake Ltd | ECR Glass Flake GF100nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.100nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pro...展开 ECR Glass Flake GF100nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.100nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF350nm (Unmilled) | Glassflake Ltd | ECR Glass Flake GF350nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.350nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pr...展开 ECR Glass Flake GF350nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.350nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF350nmM (Milled) | Glassflake Ltd | ECR Glass Flake GF350nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.350nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pro...展开 ECR Glass Flake GF350nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.350nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF500M (Milled) | Glassflake Ltd | ECR Glass Flake GF500M (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 3.5 - 5.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pr...展开 ECR Glass Flake GF500M (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 3.5 - 5.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF500M (Unmilled) | Glassflake Ltd | ECR Glass Flake GF500 (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 3.5 - 5.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier p...展开 ECR Glass Flake GF500 (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 3.5 - 5.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF500nm (Unmilled) | Glassflake Ltd | ECR Glass Flake GF500nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.500nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pr...展开 ECR Glass Flake GF500nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.500nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF500nmM (Milled) | Glassflake Ltd | ECR Glass Flake GF500nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.500nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pro...展开 ECR Glass Flake GF500nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.500nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF750M (Milled) | Glassflake Ltd | ECR Glass Flake GF750 (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 5.5 - 9.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pro...展开 ECR Glass Flake GF750 (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 5.5 - 9.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF750M (Unmilled) | Glassflake Ltd | ECR Glass Flake GF750 (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 5.5 - 9.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier p...展开 ECR Glass Flake GF750 (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 5.5 - 9.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF750nm (Unmilled) | Glassflake Ltd | ECR Glass Flake GF750nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.750nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pr...展开 ECR Glass Flake GF750nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.750nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF750nmM (Milled) | Glassflake Ltd | ECR Glass Flake GF750nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.750nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pro...展开 ECR Glass Flake GF750nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.750nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| Fluorcolor 2700 BLM | Fluorcolors Pigmentos industria e comercio Ltda. | Fluorcolor 2700 BLM is a blue vivid fluorescent liquid dispersion. This product is most commonly used in waterborne coating, water based ink, and paper coating applications. It has a good wash resistance and a viscosity of 400-1000 cps. | |
| Fluorcolor 2700 GRM | Fluorcolors Pigmentos industria e comercio Ltda. | Fluorcolor 2700 GRM is a green vivid fluorescent liquid dispersion. This product is most commonly used in waterborne coating, water based ink, and paper coating applications. It has a good wash resistance and a viscosity of 400-1000 cps. | |
| Fluorcolor 2700 MGT | Fluorcolors Pigmentos industria e comercio Ltda. | Fluorcolor 2700 MGT is a pink vivid fluorescent liquid dispersion. This product is most commonly used in waterborne coating, water based ink, and paper coating applications. It has a good wash resistance and a viscosity of 400-1000 cps. | |
| Fluorcolor 2700 MMG | Fluorcolors Pigmentos industria e comercio Ltda. | Fluorcolor 2700 MMG is a magenta vivid fluorescent liquid dispersion. This product is most commonly used in waterborne coating, water based ink, and paper coating applications. It has a good wash resistance and a viscosity of 400-1000 cps. | |
| Fluorcolor 2700 ORG | Fluorcolors Pigmentos industria e comercio Ltda. | Fluorcolor 2700 ORG is a yellowish orange vivid fluorescent liquid dispersion. This product is most commonly used in waterborne coating, water based ink, and paper coating applications. It has a good wash resistance and a viscosity of 400-1000 cps. | |
| Fluorcolor 2700 ORM | Fluorcolors Pigmentos industria e comercio Ltda. | Fluorcolor 2700 ORM is an orange vivid fluorescent liquid dispersion. This product is most commonly used in waterborne coating, water based ink, and paper coating applications.It has a good wash resistance and a viscosity of 400-1000 cps. | |
| Fluorcolor 2700 RDM | Fluorcolors Pigmentos industria e comercio Ltda. | Fluorcolor 2700 RDM is an orange red vivid fluorescent liquid dispersion. This product is most commonly used in waterborne coating, water based ink, and paper coating applications. It has a good wash resistance and a viscosity of 400-1000 cps. | |
| Fluorcolor 2700 RED | Fluorcolors Pigmentos industria e comercio Ltda. | Fluorcolor 2700 RED is a red vivid fluorescent liquid dispersion. This product is most commonly used in waterborne coating, water based ink, and paper coating applications. It has a good wash resistance and a viscosity of 400-1000 cps. | |
| Fluorcolor 2700 VLT | Fluorcolors Pigmentos industria e comercio Ltda. | Fluorcolor 2700 VLT is a violet vivid fluorescent liquid dispersion. This product is most commonly used in waterborne coating, water based ink, and paper coating applications. It has a good wash resistance and a viscosity of 400-1000 cps. | |
| Fluorcolor 2700 YLW | Fluorcolors Pigmentos industria e comercio Ltda. | Fluorcolor 2700 YLW is a yellow vivid fluorescent liquid dispersion. This product is most commonly used in waterborne coating, water based ink, and paper coating applications. It has a good wash resistance and a viscosity of 400-1000 cps. | |
| Hailerui Cadmium Red P2018 | Dongguan Hailerui Chemical Co., Ltd. | Hailerui Cadmium Red P2018 is an inorganic pigment that appears as a red powder. This product has an oil absorption of 16-23 and a moisture content of <0.5%. It can be used in paints, coatings, and art gravure painting inks. | |
| Hailerui Cadmium Yellow P2037-1 | Dongguan Hailerui Chemical Co., Ltd. | Hailerui Cadmium Yellow P2037-1 is an inorganic pigment that appears as a yellow powder. This product has an oil absorption of 27-30 and a moisture content of <0.5%. It can be used in traffic paints and printing inks. | |
| Hailerui Cadmium Yellow P2037-4 | Dongguan Hailerui Chemical Co., Ltd. | Hailerui Cadmium Yellow P2037-4 is an inorganic pigment that appears as a yellow powder. This product has an oil absorption of 27-30 and a moisture content of <0.5%. It can be used in traffic paints and printing inks. | |
| Hailerui Cadmium Yellow P2037-5 | Dongguan Hailerui Chemical Co., Ltd. | Hailerui Cadmium Yellow P2037-5 is an inorganic pigment that appears as a yellow powder. This product has an oil absorption of 27-30 and a moisture content of <0.5%. It can be used in traffic paints and printing inks. | |
| Hailerui Permanent Violet P.V.23BL | Dongguan Hailerui Chemical Co., Ltd. | Hailerui Permanent Violet P.V.23BL is a high performance organic pigment that appears as a violet powder. This product has an oil absorption of 38-53 g/100g and a pH value of 6.2. It can be used in paints, printing inks, and textiles. | |
| Hailerui Permanent Violet P.V.23RL | Dongguan Hailerui Chemical Co., Ltd. | Hailerui Permanent Violet P.V.23RL is a high performance organic pigment that appears as a violet powder. This product has an oil absorption of 38-53 g/100g and a pH value of 6.2. It can be used in paints, printing inks, and textiles. | |
| Hailerui Phthalocyanine Blue P.B.15:0 | Dongguan Hailerui Chemical Co., Ltd. | Hailerui Phthalocyanine Blue P.B.15:0 is an organic pigment that appears as a blue powder. This product has an oil absorption of 32-70 g/100g and a pH value of 6.5-8. It can be used in printing inks and paints. | |
| Hailerui Phthalocyanine Blue P.B.15:1 | Dongguan Hailerui Chemical Co., Ltd. | Hailerui Phthalocyanine Blue P.B.15:1 is an organic pigment that appears as a blue powder. This product has an oil absorption of 32-70 g/100g and a pH value of 6.5-8. It can be used in printing inks and paints. | |
| Hailerui Phthalocyanine Blue P.B.15:2 | Dongguan Hailerui Chemical Co., Ltd. | Hailerui Phthalocyanine Blue P.B.15:2 is an organic pigment that appears as a blue powder. This product has an oil absorption of 32-70 g/100g and a pH value of 6.5-8. It can be used in printing inks and paints. | |
| Hailerui Phthalocyanine Blue P.B.15:3 | Dongguan Hailerui Chemical Co., Ltd. | Hailerui Phthalocyanine Blue P.B.15:3 is an organic pigment that appears as a blue powder. This product has an oil absorption of 32-70 g/100g and a pH value of 6.5-8. It can be used in printing inks and paints. | |
| Hailerui Phthalocyanine Blue P.B.15:4 | Dongguan Hailerui Chemical Co., Ltd. | Hailerui Phthalocyanine Blue P.B.15:4 is an organic pigment that appears as a blue powder. This product has an oil absorption of 32-70 g/100g and a pH value of 6.5-8. It can be used in printing inks and paints. | |
| Hailerui Phthalocyanine Green PG7 | Dongguan Hailerui Chemical Co., Ltd. | Hailerui Phthalocyanine Green PG7 is an organic copper pigment that appears as a dark green powder. This product has an oil absorption of 30-45 g/100g and a pH value of 6.5-8. It can be used in coatings, paints, inks, and printing paste. | |
| Hailerui Titanium Yellow 42-118A | Dongguan Hailerui Chemical Co., Ltd. | Hailerui Titanium Yellow 42-118A is an inorganic pigment that appears as a brown powder. This product has an oil absorption of 11-17 and a moisture content of <0.2%. It can be used in road sign coatings, powder coatings, paints, and printing inks. | |
| Hailerui Titanium Yellow K2001 | Dongguan Hailerui Chemical Co., Ltd. | Hailerui Titanium Yellow K2001 is an inorganic pigment that appears as a brown powder. This product has an oil absorption of 11-17 and a moisture content of <0.2%. It can be used in road sign coatings, powder coatings, paints, and printing inks. | |
| Hailerui Titanium Yellow K2001FG | Dongguan Hailerui Chemical Co., Ltd. | Hailerui Titanium Yellow K2001FG is an inorganic pigment that appears as a brown powder. This product has an oil absorption of 11-17 and a moisture content of <0.2%. It can be used in road sign coatings, powder coatings, paints, and printing inks. | |
| Hailerui Titanium Yellow TY-300 | Dongguan Hailerui Chemical Co., Ltd. | Hailerui Titanium Yellow TY-300 is an inorganic pigment that appears as a dark yellow powder. This product has an oil absorption of 11-17 and a moisture content of <0.2%. It can be used in road sign coatings, powder coatings, paints, and printing inks. | |
| Hailerui Ultramarine Blue 5008 | Dongguan Hailerui Chemical Co., Ltd. | Hailerui Ultramarine Blue 5008 is an inorganic pigment that appears as a blue powder. This product has an oil absorption of 30-40 g/100g and a pH value of 8. It can be used in various paints and inks. | |
| Hailerui Ultramarine Blue EP-19 | Dongguan Hailerui Chemical Co., Ltd. | Hailerui Ultramarine Blue EP-19 is an inorganic pigment that appears as a blue powder. This product has an oil absorption of 30-40 g/100g and a pH value of 8. It can be used in various paints and inks. | |
| Hailerui Ultramarine Blue EP-25 | Dongguan Hailerui Chemical Co., Ltd. | Hailerui Ultramarine Blue EP-25 is an inorganic pigment that appears as a blue powder. This product has an oil absorption of 30-40 g/100g and a pH value of 8. It can be used in various paints and inks. | |
| Hailerui Ultramarine Blue EP-37 | Dongguan Hailerui Chemical Co., Ltd. | Hailerui Ultramarine Blue EP-37 is an inorganic pigment that appears as a blue powder. This product has an oil absorption of 30-40 g/100g and a pH value of 8. It can be used in various paints and inks. | |
| Hailerui Ultramarine Blue GP-58 | Dongguan Hailerui Chemical Co., Ltd. | Hailerui Ultramarine Blue GP-58 is an inorganic pigment that appears as a blue powder. This product has an oil absorption of 30-40 g/100g and a pH value of 8. It can be used in various paints and inks. | |
| Hailerui Ultramarine Blue RS-05 | Dongguan Hailerui Chemical Co., Ltd. | Hailerui Ultramarine Blue RS-05 is an inorganic pigment that appears as a blue powder. This product has an oil absorption of 30-40 g/100g and a pH value of 8. It can be used in various paints and inks. | |
| Hailerui Ultramarine Blue RS-06 | Dongguan Hailerui Chemical Co., Ltd. | Hailerui Ultramarine Blue RS-06 is an inorganic pigment that appears as a blue powder. This product has an oil absorption of 30-40 g/100g and a pH value of 8. It can be used in various paints and inks. | |
| HVAMA | Shexian Sinfeng Chem Co., Ltd. (Kunshan PG Chem Co., Ltd.) | HVAMA is a super macromolecule weight resin having a composition of approximately 84 percent vinyl chloride, 13 percent vinyl acetate and 3 percent maleic acid. The carboxyl functional group allows HVAMA to adhere to metal while still being resistant to ...展开 HVAMA is a super macromolecule weight resin having a composition of approximately 84 percent vinyl chloride, 13 percent vinyl acetate and 3 percent maleic acid. The carboxyl functional group allows HVAMA to adhere to metal while still being resistant to water, oil, ester, acid, alkali, and salt water solution. HVAMA is used primarily for air-dry finishes, such as maintenance, marine and metal coating, can sealed paint, wood and glass coating, metal inks, and adhesive for binder nails. 收起 | |
| LA Glass Flake GF001LA | Glassflake Ltd | LA Glass Flake GF001LA is a Low Alkali Glassflake, or LAG, which has been formulated specifically for use as a pigment substrate, giving the finished product unique effects. Glass flakes, or borosilicates as they are often referred to, are a unique substr...展开 LA Glass Flake GF001LA is a Low Alkali Glassflake, or LAG, which has been formulated specifically for use as a pigment substrate, giving the finished product unique effects. Glass flakes, or borosilicates as they are often referred to, are a unique substrate which, unlike natural micas and synthetic micas, have a completely planar and smooth surface. They are also completely transparent, giving rise to effect pigments coated with metal oxides that display high brightness, good color purity, and high chroma. Presently glass flake pigments are used in both cosmetic and industrial applications including automotive coatings. 收起 | |
| LA Glass Flake GF100LA | Glassflake Ltd | LA Glass Flake GF100LA is a Low Alkali Glassflake, or LAG, which has been formulated specifically for use as a pigment substrate, giving the finished product unique effects. Glass flakes, or borosilicates as they are often referred to, are a unique substr...展开 LA Glass Flake GF100LA is a Low Alkali Glassflake, or LAG, which has been formulated specifically for use as a pigment substrate, giving the finished product unique effects. Glass flakes, or borosilicates as they are often referred to, are a unique substrate which, unlike natural micas and synthetic micas, have a completely planar and smooth surface. They are also completely transparent, giving rise to effect pigments coated with metal oxides that display high brightness, good color purity, and high chroma. Presently glass flake pigments are used in both cosmetic and industrial applications including automotive coatings. 收起 | |
| LA Glass Flake GF100MLA | Glassflake Ltd | LA Glass Flake GF100MLA is a Low Alkali Glassflake, or LAG, which has been formulated specifically for use as a pigment substrate, giving the finished product unique effects. Glass flakes, or borosilicates as they are often referred to, are a unique subst...展开 LA Glass Flake GF100MLA is a Low Alkali Glassflake, or LAG, which has been formulated specifically for use as a pigment substrate, giving the finished product unique effects. Glass flakes, or borosilicates as they are often referred to, are a unique substrate which, unlike natural micas and synthetic micas, have a completely planar and smooth surface. They are also completely transparent, giving rise to effect pigments coated with metal oxides that display high brightness, good color purity, and high chroma. Presently glass flake pigments are used in both cosmetic and industrial applications including automotive coatings. 收起 | |
| LC-40 | Shexian Sinfeng Chem Co., Ltd. (Kunshan PG Chem Co., Ltd.) | LC-40 is a high molecular weight resin having a composition of approximately 60 percent vinyl chloride and 40 percent vinyl acetate. LC-40 offers a desirable balance of chemical resistance, solubility, diaphaneity, film strength, and thermoplasticity. LC-...展开 LC-40 is a high molecular weight resin having a composition of approximately 60 percent vinyl chloride and 40 percent vinyl acetate. LC-40 offers a desirable balance of chemical resistance, solubility, diaphaneity, film strength, and thermoplasticity. LC-40 is usually dissolved in a relatively strong solvent/diluent combination, such as ketone solvent/aromatic diluent (50/50 percent by weight). LC-40 is used primarily for maintenance coatings, plastic coatings, heat-transfer paint, outdoor printing ink, and adhesive for magnetic card and cardboard. 收起 | |
| Luxcor 200 AML | Fluorcolors Pigmentos industria e comercio Ltda. | Luxcor 200 AML is a yellow fine powder with intense color. This product is most commonly used in paints and inks, and has good solvent resistance. | |
| Luxcor 200 AZL | Fluorcolors Pigmentos industria e comercio Ltda. | Luxcor 200 AZL is a blue fine powder with intense color. This product is most commonly used in paints and inks, and has good solvent resistance. | |
| Luxcor 200 LRJ | Fluorcolors Pigmentos industria e comercio Ltda. | Luxcor 200 LRJ is an orange fine powder with intense color. This product is most commonly used in paints and inks, and has good solvent resistance. | |
| Luxcor 200 LRM | Fluorcolors Pigmentos industria e comercio Ltda. | Luxcor 200 LRM is a yellowish orange fine powder with intense color. This product is most commonly used in paints and inks, and has good solvent resistance. | |
| Luxcor 200 MGT | Fluorcolors Pigmentos industria e comercio Ltda. | Luxcor 200 MGT is a pink fine powder with intense color. This product is most commonly used in paints and inks, and has good solvent resistance. | |
| Luxcor 200 MMG | Fluorcolors Pigmentos industria e comercio Ltda. | Luxcor 200 MMG is a magenta fine powder with intense color. This product is most commonly used in paints and inks, and has good solvent resistance. | |
| Luxcor 200 VLT | Fluorcolors Pigmentos industria e comercio Ltda. | Luxcor 200 VLT is a violet fine powder with intense color. This product is most commonly used in paints and inks, and has good solvent resistance. | |
| Luxcor 200 VML | Fluorcolors Pigmentos industria e comercio Ltda. | Luxcor 200 VML is a red 2 fine powder with intense color. This product is most commonly used in paints and inks, and has good solvent resistance. | |
| Luxcor 200 VMM | Fluorcolors Pigmentos industria e comercio Ltda. | Luxcor 200 VMM is a red 1 fine powder with intense color. This product is most commonly used in paints and inks, and has good solvent resistance. | |
| Luxcor 200 VRD | Fluorcolors Pigmentos industria e comercio Ltda. | Luxcor 200 VRD is a green fine powder with intense color. This product is most commonly used in paints and inks, and has good solvent resistance. | |
| Luxcor 500 AML | Fluorcolors Pigmentos industria e comercio Ltda. | Luxcor 500 AML is a yellow thick powder with intense color. This product is most commonly used in flexo inks and rotogravure applications. It has a high color strength and a density of 1.4 g/cm3. | |
| Luxcor 500 MGT | Fluorcolors Pigmentos industria e comercio Ltda. | Luxcor 500 MGT is a pink thick powder with intense color. This product is most commonly used in flexo inks and rotogravure applications. It has a high color strength and a density of 1.4 g/cm3. | |
| Luxcor 500 VMM | Fluorcolors Pigmentos industria e comercio Ltda. | Luxcor 500 VMM is a red 1 thick powder with intense color. This product is most commonly used in flexo inks and rotogravure applications. It has a high color strength and a density of 1.4 g/cm3. | |
| Moonshine® AgFlake 100-100 (GFEAGF-1100) | Glassflake Ltd | Moonshine® AgFlake 100-100 are thin borosilicate glass flakes encapsulated in silver. They may be used for functional purposes as a conductive filler. They have an average particle size diameter of 100 μm. High conductivity can be achieved at low loadings...展开 Moonshine® AgFlake 100-100 are thin borosilicate glass flakes encapsulated in silver. They may be used for functional purposes as a conductive filler. They have an average particle size diameter of 100 μm. High conductivity can be achieved at low loadings. Agflakes are lightweight in contrast to equivalent pure metal fillers. They may be used as both a functional and a decorative pigment. Presently glass flake pigments are used in both cosmetic and industrial applications including automotive coatings. 收起 | |
| Moonshine® AgFlake 100-20 (GFEAGF-1020) | Glassflake Ltd | Moonshine® AgFlake 100-20 are thin borosilicate glass flakes encapsulated in silver. They may be used for functional purposes as a conductive filler. They have an average particle size diameter of 20 μm. High conductivity can be achieved at low loadings. ...展开 Moonshine® AgFlake 100-20 are thin borosilicate glass flakes encapsulated in silver. They may be used for functional purposes as a conductive filler. They have an average particle size diameter of 20 μm. High conductivity can be achieved at low loadings. Agflakes are lightweight in contrast to equivalent pure metal fillers. They may be used as both a functional and a decorative pigment. Presently glass flake pigments are used in both cosmetic and industrial applications including automotive coatings. 收起 | |
| Moonshine® AgFlake 100-40 (GFEAGF-1040) | Glassflake Ltd | Moonshine® AgFlake 100-40 are thin borosilicate glass flakes encapsulated in silver. They may be used for functional purposes as a conductive filler. They have an average particle size diameter of 40 μm. High conductivity can be achieved at low loadings. ...展开 Moonshine® AgFlake 100-40 are thin borosilicate glass flakes encapsulated in silver. They may be used for functional purposes as a conductive filler. They have an average particle size diameter of 40 μm. High conductivity can be achieved at low loadings. Agflakes are lightweight in contrast to equivalent pure metal fillers. They may be used as both a functional and a decorative pigment. Presently glass flake pigments are used in both cosmetic and industrial applications including automotive coatings. 收起 | |
| Moonshine® AgFlake 100-60 (GFEAGF-1060) | Glassflake Ltd | Moonshine® AgFlake 100-60 are thin borosilicate glass flakes encapsulated in silver. They may be used for functional purposes as a conductive filler. They have an average particle size diameter of 60 μm. High conductivity can be achieved at low loadings. ...展开 Moonshine® AgFlake 100-60 are thin borosilicate glass flakes encapsulated in silver. They may be used for functional purposes as a conductive filler. They have an average particle size diameter of 60 μm. High conductivity can be achieved at low loadings. Agflakes are lightweight in contrast to equivalent pure metal fillers. They may be used as both a functional and a decorative pigment. Presently glass flake pigments are used in both cosmetic and industrial applications including automotive coatings. 收起 |
