| Bisomer® BZMA | GEO Specialty Chemicals, Inc. TRIMET Products Group | BISOMER®BZMA（甲基丙烯酸苄基酯）是一种低粘度单官能单体，广泛适用于多种应用。Bisomer BZMA粘度低，疏水性差，它特别适合作为胶黏剂，密封剂，墨水和涂料的活性稀释剂。 | |
| Bisomer® PPA 6 | GEO Specialty Chemicals, Inc. TRIMET Products Group | 为制备UV固化氨基甲酸酯丙烯酸酯齐聚物提供了一种非常规的途径。它是用于基于氨基甲酸酯丙烯酸酯和乙烯基酯（环氧乙烯基酯）UV体系的出色的低收缩反应性稀释剂 | |
| DMPA® Polyol HA-0135 | GEO Specialty Chemicals, Inc. TRIMET Products Group | 是一种DMPA CHDA BDO己二酸聚酯树脂，98%不挥发组分。它可作为水性体系的酸官能团来源和作为共树脂改进颜料的润湿、分散和稳定。 | |
| HVAMA | Shexian Sinfeng Chem Co., Ltd. (Kunshan PG Chem Co., Ltd.) | HVAMA is a super macromolecule weight resin having a composition of approximately 84 percent vinyl chloride, 13 percent vinyl acetate and 3 percent maleic acid. The carboxyl functional group allows HVAMA to adhere to metal while still being resistant to ...展开 HVAMA is a super macromolecule weight resin having a composition of approximately 84 percent vinyl chloride, 13 percent vinyl acetate and 3 percent maleic acid. The carboxyl functional group allows HVAMA to adhere to metal while still being resistant to water, oil, ester, acid, alkali, and salt water solution. HVAMA is used primarily for air-dry finishes, such as maintenance, marine and metal coating, can sealed paint, wood and glass coating, metal inks, and adhesive for binder nails. 收起 | |
| LC-40 | Shexian Sinfeng Chem Co., Ltd. (Kunshan PG Chem Co., Ltd.) | LC-40 is a high molecular weight resin having a composition of approximately 60 percent vinyl chloride and 40 percent vinyl acetate. LC-40 offers a desirable balance of chemical resistance, solubility, diaphaneity, film strength, and thermoplasticity. LC-...展开 LC-40 is a high molecular weight resin having a composition of approximately 60 percent vinyl chloride and 40 percent vinyl acetate. LC-40 offers a desirable balance of chemical resistance, solubility, diaphaneity, film strength, and thermoplasticity. LC-40 is usually dissolved in a relatively strong solvent/diluent combination, such as ketone solvent/aromatic diluent (50/50 percent by weight). LC-40 is used primarily for maintenance coatings, plastic coatings, heat-transfer paint, outdoor printing ink, and adhesive for magnetic card and cardboard. 收起 | |
| Resiprene 35 | PT. Industri Karet Nusantara | Resiprene 35 is a cyclized natural rubber soluble in odorless solvent, particularly in aliphatic hydrocarbon and cheap blends of aromatic and aliphatic. This product is suitable for protective and maintenance coatings as well as marine paints for brushing...展开 Resiprene 35 is a cyclized natural rubber soluble in odorless solvent, particularly in aliphatic hydrocarbon and cheap blends of aromatic and aliphatic. This product is suitable for protective and maintenance coatings as well as marine paints for brushing, rollers and spray applications. It is used to supply resistance to aqueous alkalis, acids and salt solutions in addition to water and humidity. 收起 | |
| SMP-45 | Shexian Sinfeng Chem Co., Ltd. (Kunshan PG Chem Co., Ltd.) | SMP-45 is a copolymer of vinyl chloride and vinyl isobutyl ether. It is designed with a molecular structure that makes it resistant to hydrolysis and the combined chlorine atom is very stable. SMP-45 is soluble in aromatic hydrocarbons, ester, and carbon....展开 SMP-45 is a copolymer of vinyl chloride and vinyl isobutyl ether. It is designed with a molecular structure that makes it resistant to hydrolysis and the combined chlorine atom is very stable. SMP-45 is soluble in aromatic hydrocarbons, ester, and carbon. The viscosity of this product is 45±5 mPa·s. This product is used in basic resin in anticorrosion paint (steel structure, container, marine, underwater structure, machinery and automobile engineering, transport equipment & industrial paint) and it is also well-known in composite inks. 收起 | |
| SMP-60 | Shexian Sinfeng Chem Co., Ltd. (Kunshan PG Chem Co., Ltd.) | SMP-60 is a copolymer of vinyl chloride and vinyl isobutyl ether. It is designed with a molecular structure that makes it resistant to hydrolysis and the combined chlorine atom is very stable. SMP-60 is soluble in aromatic hydrocarbons, ester, and carbon....展开 SMP-60 is a copolymer of vinyl chloride and vinyl isobutyl ether. It is designed with a molecular structure that makes it resistant to hydrolysis and the combined chlorine atom is very stable. SMP-60 is soluble in aromatic hydrocarbons, ester, and carbon. The viscosity of this product is 60±5 mPa·s. This product is used in basic resin in anticorrosion paint (steel structure, container, marine, underwater structure, machinery and automobile engineering, transport equipment & industrial paint) and it is also well-known in composite inks. 收起 | |
| Uvi-Cure S105E | Lambson Group Ltd. | UviCure S105E is a high purity, low viscosity difunctional cycloaliphatic epoxide resin which gives clear, hard, glossy coatings when polymerised with onium salt photoinitiators. | |
| Uvi-Cure S110-LV | Lambson Group Ltd. | Uvi-Cure S110-LV is a standard cycloaliphatic epoxy base resin used in metal decoration coatings, overprint varnishes, white base coats, DVD adhesives, electrical coatings and sealants in addition to flexo, screen and ink jet inks. This product contains l...展开 Uvi-Cure S110-LV is a standard cycloaliphatic epoxy base resin used in metal decoration coatings, overprint varnishes, white base coats, DVD adhesives, electrical coatings and sealants in addition to flexo, screen and ink jet inks. This product contains low viscosity enabling a greater scope for meeting end-use processing needs. When this pale yellow to colourless transparent liquid is combined with photoinitiators it produces a clear, hard, glossy coatings. 收起 | |
| Uvi-Cure S128 | Lambson Group Ltd. | UviCure S128 is an adipate based difunctional cycloaliphatic epoxide resin which can be used alone or as an additive in UviCure S105 based formulations to increase the flexibility of a cured coating when polymerised with onium salt photoinitiators. | |
| UviCure S105 | Lambson Group Ltd. | UviCure S105 is a low viscosity difunctional cycloaliphatic epoxide resin which gives clear, hard, glossy coatings when polymerised with onium salt photoinitiators. | |
| VAM | Shexian Sinfeng Chem Co., Ltd. (Kunshan PG Chem Co., Ltd.) | VAM is a high molecular weight resin containing approximately 86 percent vinyl chloride, 13 percent vinyl acetate, and 1 percent maleic anhydride. The carboxyl functional group allows VAM to adhere to metal while still being resistant to water, oil, ester...展开 VAM is a high molecular weight resin containing approximately 86 percent vinyl chloride, 13 percent vinyl acetate, and 1 percent maleic anhydride. The carboxyl functional group allows VAM to adhere to metal while still being resistant to water, oil, ester, acid, alkali, and salt water solution. VAM is used for can sealed paint, shoe adhesive, floor paint, silk screen printing, and transfer ink, as well as electro-chemical aluminum paint, and thermal transfer adhesive. 收起 | |
| VMA | Shexian Sinfeng Chem Co., Ltd. (Kunshan PG Chem Co., Ltd.) | VMA is a low molecular weight resin containing approximately 81 percent vinyl chloride, 17 percent vinyl acetate, and 2 percent maleic acid. The carboxyl functional group allows VMA to adhere to metal while still being resistant to chemicals. VMA yields t...展开 VMA is a low molecular weight resin containing approximately 81 percent vinyl chloride, 17 percent vinyl acetate, and 2 percent maleic acid. The carboxyl functional group allows VMA to adhere to metal while still being resistant to chemicals. VMA yields the balance of solubility and viscosity properties needed for high-build, air-dry maintenance finishes, and is often used to make coatings and adhesives applications where higher solids are desirable. VMA can be used in air-dry finishes, such as maintenance, marine, and metal coatings. It is also used in interbedded adhesives, thermal transfer adhesives, shoe adhesives, ink-jet and metal inks. 收起 | |
| VMC | Shexian Sinfeng Chem Co., Ltd. (Kunshan PG Chem Co., Ltd.) | VMC is a medium molecular weight resin containing approximately 83 percent vinyl chloride, 16 percent vinyl acetate, and 1 percent maleic acid. The carboxyl functional group allows VMC to adhere to metal while still being resistant to water, oil, ester, a...展开 VMC is a medium molecular weight resin containing approximately 83 percent vinyl chloride, 16 percent vinyl acetate, and 1 percent maleic acid. The carboxyl functional group allows VMC to adhere to metal while still being resistant to water, oil, ester, acid, alkali, and salt water solution. VMC is used for air-dry finishes, such as maintenance, marine, metal, and can coatings, as well as interbedded adhesives, thermal transfer adhesives, shoe adhesives, and metal inks. 收起 |
