| CV-2900 | NuSil Silicone Technology 1 | CV-2900 is a non-corrosive silicone adhesive that is designed for enhanced performance in extreme low and high temperatures. It can be used as a bond and sealant for applications such as overhead or vertical joints that require a non-slumping and one-part...展开 CV-2900 is a non-corrosive silicone adhesive that is designed for enhanced performance in extreme low and high temperatures. It can be used as a bond and sealant for applications such as overhead or vertical joints that require a non-slumping and one-part material. It can also be utilized as an adhesive , caulking or potting material in electronics/space applications that require minimal outgassing and provides protection from condensation in sensitive devices. 收起 | |
| CV-2943 | NuSil Silicone Technology 1 | CV-2943 is a thermally conductive RTV silicone that has controlled volatility and is designed for enhanced performance in extreme high or low temperatures. It can be used for applications that require low outgassing and minimal volatile condensables under...展开 CV-2943 is a thermally conductive RTV silicone that has controlled volatility and is designed for enhanced performance in extreme high or low temperatures. It can be used for applications that require low outgassing and minimal volatile condensables under extreme operating conditions. This product is also utilized as an adhesive for openings in housings or modules where grooves and other configurations require a limited flow material. 收起 | |
| CV2-1142 | NuSil Silicone Technology 1 | CV2-1142 is a non-corrosive, non-slumping, translucent RTV silicone adhesive/sealant that has controlled volatility. It can be used in applications that require low outgassing under extreme operating conditions. This product is useful for sealing and bond...展开 CV2-1142 is a non-corrosive, non-slumping, translucent RTV silicone adhesive/sealant that has controlled volatility. It can be used in applications that require low outgassing under extreme operating conditions. This product is useful for sealing and bonding in applications such as overhead or vertical joints that require a non-slumping, one-part material. It can also be utilized as a sealant, caulking, adhesive or potting material in space and electrical applications that require minimal outgassing. 收起 | |
| CV2-1161 | NuSil Silicone Technology 1 | CV2-1161 is a pressure sensitive silicone adhesive that retains its adhesive qualities in the presence of minor liquid particulate contaminants. It is able to withstand normal pressure variations as well as high temperature exposure. This product is ideal...展开 CV2-1161 is a pressure sensitive silicone adhesive that retains its adhesive qualities in the presence of minor liquid particulate contaminants. It is able to withstand normal pressure variations as well as high temperature exposure. This product is ideal for bonding and adhering silicone elastomers, paper, metals, glass, fabric, films, and some synthetics. It can also be used for applications that require low outgassing and minimal volatile condensable materials. 收起 | |
| CV3-2500 | NuSil Silicone Technology 1 | CV3-2500 is an optically clear silicone that is has controlled volatility. It is an ideal product for applications that require a low viscosity to create a superior flow and low outgassing. This is how it helps keep condensation from affecting sensitive d...展开 CV3-2500 is an optically clear silicone that is has controlled volatility. It is an ideal product for applications that require a low viscosity to create a superior flow and low outgassing. This is how it helps keep condensation from affecting sensitive devices. It can also be utilized as an adhesive for projects involving solar arrays. 收起 | |
| CV4-1161-5 | NuSil Silicone Technology 1 | CV4-1161-5 is a one-part, double-sided pressure sensitive adhesive tape that is best used to adhere and bond metals, paper, glass, fabric, organic rubbers, synthetics and films. It has the ability to collect dust in and around sensitive electronic compone...展开 CV4-1161-5 is a one-part, double-sided pressure sensitive adhesive tape that is best used to adhere and bond metals, paper, glass, fabric, organic rubbers, synthetics and films. It has the ability to collect dust in and around sensitive electronic components and is designed to withstand extreme temperature/pressure variations. 收起 | |
| CV4-2289-1 | NuSil Silicone Technology 1 | CV4-2289-1 is a thixotropic silicone elastomer that can be used as an adhesive that offers superior tear strength. This silicone also demonstrates flexibility at extremely low temperatures with a stiffening temperature of approximately -115°C. It can be u...展开 CV4-2289-1 is a thixotropic silicone elastomer that can be used as an adhesive that offers superior tear strength. This silicone also demonstrates flexibility at extremely low temperatures with a stiffening temperature of approximately -115°C. It can be used to protect electronic components, cable harness breakouts, seals, and gaskets from harsh environmental conditions. 收起 | |
| CV7-1142-1 | NuSil Silicone Technology 1 | CV7-1142-1 is a non corrosive material that has a white color and it is a non-slumping silicone RTV. It can be used as a caulking, adhesive or sealant that protects sensitive circuits, connectors and switches in space applications. This product has a broa...展开 CV7-1142-1 is a non corrosive material that has a white color and it is a non-slumping silicone RTV. It can be used as a caulking, adhesive or sealant that protects sensitive circuits, connectors and switches in space applications. This product has a broad operating temperature range so it can withstand hot and cold conditions. It also can be used for sealing openings in modules or housings where grooves or other configurations require a non-flowable to limited flow material. 收起 | |
| Cyanine Blue BGNCF | Hangzhou Tiankai (China) Enterprise Co., Ltd. | Cyanine Blue BGNCF is a bright greenish blue pigment that features strong color strength. This product has a density of 1.6 g/cm3 and a pH value of 6-8, and it is commonly used in inks and coatings. | |
| Cyanine Blue BGS | Hangzhou Tiankai (China) Enterprise Co., Ltd. | Cyanine Blue BGS is a bright blue pigment with low viscosity and good fluidity. This product has a density of 1.5-1.6 g/cm3 and a pH value of 5.5-8.0, and it is commonly used in offset inks and solvent-based inks. | |
| Cyanine Blue BS | Hangzhou Tiankai (China) Enterprise Co., Ltd. | Cyanine Blue BS is a high strength reddish blue pigment that has great liquidity. This product has a density of 1.5 g/cm3 and a pH value of 6.5-7.5, and it finds application in water-based inks and textile printing. | |
| DA-100 | DCC (Dairen Chemical Corp.) | DA-100 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-100 forms a flexible film with adhesive properties for broad applications. DA-100 is used as a base emu...展开 DA-100 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-100 forms a flexible film with adhesive properties for broad applications. DA-100 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-100 is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-100L | DCC (Dairen Chemical Corp.) | DA-100L is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-100L forms a flexible film with adhesive properties for broad applications. DA-100L is used as a base e...展开 DA-100L is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-100L forms a flexible film with adhesive properties for broad applications. DA-100L is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-100L is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-101 | DCC (Dairen Chemical Corp.) | DA-101 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-101 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C o...展开 DA-101 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-101 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 1500-2500 mPa.s. DA-101 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-101 is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-102 | DCC (Dairen Chemical Corp.) | DA-102 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-102 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C o...展开 DA-102 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-102 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 2500-3700 mPa.s. DA-102 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-102 is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-102H | DCC (Dairen Chemical Corp.) | DA-102H is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-102H forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C...展开 DA-102H is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-102H forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 3500-4500 mPa.s. DA-102H is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-102H is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-103 | DCC (Dairen Chemical Corp.) | DA-103 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-103 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C o...展开 DA-103 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-103 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 1500-2500 mPa.s. DA-103 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-103 is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-103H | DCC (Dairen Chemical Corp.) | DA-103H is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-103H forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C...展开 DA-103H is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-103H forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 3200-4200 mPa.s. DA-103H is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-103H is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-104 | DCC (Dairen Chemical Corp.) | DA-104 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-104 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C o...展开 DA-104 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-104 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 2000-3000 mPa.s. DA-104 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-104 is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-107 | DCC (Dairen Chemical Corp.) | DA-107 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-107 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C o...展开 DA-107 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-107 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 1000-2500 mPa.s. DA-107 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-107 is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-1100 | DCC (Dairen Chemical Corp.) | DA-1100 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and it forms a stable emulsion. DA-1100 improves adhesion, flex strength, abrasion resistance, and workability of modified compounds. DA-1100 ca...展开 DA-1100 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and it forms a stable emulsion. DA-1100 improves adhesion, flex strength, abrasion resistance, and workability of modified compounds. DA-1100 can be used in tile adhesives. 收起 | |
| DA-111 | DCC (Dairen Chemical Corp.) | DA-111 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-111 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C o...展开 DA-111 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-111 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 1500-2500 mPa.s. It is designed as a medium Tg product at around approximately 14 °C. DA-111 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-111 is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-1120 | DCC (Dairen Chemical Corp.) | DA-1120 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and it forms a stable emulsion. DA-1120 improves adhesion, flex strength, abrasion resistance, and workability of modified compounds. DA-1120 ca...展开 DA-1120 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and it forms a stable emulsion. DA-1120 improves adhesion, flex strength, abrasion resistance, and workability of modified compounds. DA-1120 can be used in tile adhesives. 收起 | |
| DA-1122 | DCC (Dairen Chemical Corp.) | DA-1122 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and it forms a stable emulsion. DA-1122 improves adhesion, flex strength, abrasion resistance, and workability of modified compounds. DA-1122 ca...展开 DA-1122 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and it forms a stable emulsion. DA-1122 improves adhesion, flex strength, abrasion resistance, and workability of modified compounds. DA-1122 can be used in tile adhesives. 收起 | |
| DA-1126 | DCC (Dairen Chemical Corp.) | DA-1126 is a water re-dispersible powder based on a vinyl acetate/ethylene copolymer based containing polyvinyl alcohol as a protective colloid. DA-1126 improves adhesion, flexibility, plasticity, abrasion resistance and workability of modified compounds....展开 DA-1126 is a water re-dispersible powder based on a vinyl acetate/ethylene copolymer based containing polyvinyl alcohol as a protective colloid. DA-1126 improves adhesion, flexibility, plasticity, abrasion resistance and workability of modified compounds. It is used in ceramic tile adhesives, and EIFS. 收起 | |
| DA-1130 | DCC (Dairen Chemical Corp.) | DA-1130 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1130 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds....展开 DA-1130 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1130 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds. It can be used in tile adhesives. 收起 | |
| DA-1133 | DCC (Dairen Chemical Corp.) | DA-1133 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1133 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds....展开 DA-1133 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1133 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds. DA-1133 is used in construction adhesives. 收起 | |
| DA-117 | DCC (Dairen Chemical Corp.) | DA-117 is a non-plasticized, aqueous, milky, white dispersion of a vinyl acetate-ethylene copolymer with high solid contents developed to provide a versatile base for construction applications. After evaporation of its water content, DA-117 forms a flexib...展开 DA-117 is a non-plasticized, aqueous, milky, white dispersion of a vinyl acetate-ethylene copolymer with high solid contents developed to provide a versatile base for construction applications. After evaporation of its water content, DA-117 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 500-1500 mPa.s. DA-117 is used in joint compounds and decorative coatings, and carpet back coatings. 收起 | |
| DA-1200 | DCC (Dairen Chemical Corp.) | DA-1200 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1200 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds....展开 DA-1200 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1200 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds. DA-1200 is used in tile adhesives. 收起 | |
| DA-1210 | DCC (Dairen Chemical Corp.) | DA-1210 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1210 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds....展开 DA-1210 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1210 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds. DA-1210 is used in construction adhesives, sealing slurries, and repair mortars. 收起 | |
| DA-125 | DCC (Dairen Chemical Corp.) | DA-125 is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. Due to its low Tg at around -8 °C, the dry film remains flexible even at temperatures below 0 °C. In general, DA-125 is used as general adhesive f...展开 DA-125 is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. Due to its low Tg at around -8 °C, the dry film remains flexible even at temperatures below 0 °C. In general, DA-125 is used as general adhesive for packaging, bookbinding, and bonding for plastic films, coated papers. DA-125 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-125 is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-128 | DCC (Dairen Chemical Corp.) | DA-128 is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. Due to its low Tg at around -13°C, the dry film remains flexible even at temperatures below 0 °C. In general, DA-128 is used as general adhesive f...展开 DA-128 is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. Due to its low Tg at around -13°C, the dry film remains flexible even at temperatures below 0 °C. In general, DA-128 is used as general adhesive for packaging, bookbinding, and bonding for plastic films, coated papers. DA-128 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-128 is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-128H | DCC (Dairen Chemical Corp.) | DA-128H is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. Due to its low Tg at around -13 °C, the dry film remains flexible even at temperatures below 0 °C. In general, DA-128H is used as general adhesiv...展开 DA-128H is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. Due to its low Tg at around -13 °C, the dry film remains flexible even at temperatures below 0 °C. In general, DA-128H is used as general adhesive for packaging, bookbinding, and bonding for plastic films, coated papers. DA-128H is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-128H is also a base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-1400 | DCC (Dairen Chemical Corp.) | DA-1400 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1400 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds....展开 DA-1400 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1400 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds. DA-1400 is used in tile adhesives, and sealing slurries. 收起 | |
| DA-1410 | DCC (Dairen Chemical Corp.) | DA-1410 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1410 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds....展开 DA-1410 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1410 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds. DA-1410 is used in construction adhesives. 收起 | |
| DA-1420 | DCC (Dairen Chemical Corp.) | DA-1420 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1420 improves adhesion, flexural strength, plasticity, abrasion resistance, and workability of modified compound...展开 DA-1420 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1420 improves adhesion, flexural strength, plasticity, abrasion resistance, and workability of modified compounds. DA-1420 is used in tile adhesives. 收起 | |
| DA-1430 | DCC (Dairen Chemical Corp.) | DA-1430 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1430 improves adhesion, flex strength, plasticity, abrasion resistance, and workability of modified compounds. D...展开 DA-1430 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1430 improves adhesion, flex strength, plasticity, abrasion resistance, and workability of modified compounds. DA-1430 is used in tile adhesives, and trowelling compounds. 收起 | |
| DA-1450 | DCC (Dairen Chemical Corp.) | DA-1450 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1450 improves adhesion, flex strength, plasticity, abrasion resistance, and workability of modified compounds. D...展开 DA-1450 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1450 improves adhesion, flex strength, plasticity, abrasion resistance, and workability of modified compounds. DA-1450 is used in tile adhesives, and construction adhesives. 收起 | |
| DA-180L | DCC (Dairen Chemical Corp.) | DA-180L is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. After the evaporation of its water content, DA-180L dries to a clear, soft and flexible film to provide a better waterproofing property. DA-180L ...展开 DA-180L is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. After the evaporation of its water content, DA-180L dries to a clear, soft and flexible film to provide a better waterproofing property. DA-180L is used in general adhesives. 收起 | |
| DA-265 | DCC (Dairen Chemical Corp.) | DA-265 is a non-plasticized, aqueous, milky, white vinyl acetate-ethylene-acrylate terpolymer emulsion with a solid content of 65%. After drying, a water-resistant, clear and flexible film is formed, exhibiting stability against degradation, discoloration...展开 DA-265 is a non-plasticized, aqueous, milky, white vinyl acetate-ethylene-acrylate terpolymer emulsion with a solid content of 65%. After drying, a water-resistant, clear and flexible film is formed, exhibiting stability against degradation, discoloration by UV-light, oxygen and the ozone. DA-265 is used in mineral coatings, and floor, wall, or ceiling adhesives. . 收起 | |
| DA-265H | DCC (Dairen Chemical Corp.) | DA-265H is a non-plasticized, aqueous, milky, white vinyl acetate-ethylene-acrylate terpolymer emulsion with a solid content of 65%. A water-resistant, clear and flexible film is formed after drying. This film exhibits stability against degradation, disco...展开 DA-265H is a non-plasticized, aqueous, milky, white vinyl acetate-ethylene-acrylate terpolymer emulsion with a solid content of 65%. A water-resistant, clear and flexible film is formed after drying. This film exhibits stability against degradation, discoloration, oxygen, and the ozone. Because of DA-265H's adjusted ethylene content, this film is extremely tacky and uses no plasticizers to get softness or flexibility. DA-265H is used in mineral coatings, and floor, wall, or ceiling adhesives. 收起 | |
| DA-310 | DCC (Dairen Chemical Corp.) | DA-310 is a non-plasticized, aqueous, milky, white vinyl acetate-ethylene copolymer emulsion containing incorporated carboxylic groups. It exhibits VAE emulsion properties together with increased adhesion to metals, like aluminum. DA-310 is used for seali...展开 DA-310 is a non-plasticized, aqueous, milky, white vinyl acetate-ethylene copolymer emulsion containing incorporated carboxylic groups. It exhibits VAE emulsion properties together with increased adhesion to metals, like aluminum. DA-310 is used for sealing plastics or metals to other substrates, and as a raw material for adhesives. 收起 | |
| DA-3510 | DCC (Dairen Chemical Corp.) | DA-3510 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. This resin is soft and flexible, because of its relatively high ethylene content. DA-3510 enhances the adhesion, fle...展开 DA-3510 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. This resin is soft and flexible, because of its relatively high ethylene content. DA-3510 enhances the adhesion, flexural strength, plasticity, and workability of modified compounds. DA-3510 is recommended for use as a sole binder for making construction adhesives and seals. 收起 | |
| DA-6200 | DCC (Dairen Chemical Corp.) | DA-6200 is a water re-dispersible powder based on vinyl acetate/ethylene copolymer containing polyvinyl alcohol as a protective colloid. DA-6200 contains a fine mineral filler as an anti-blocking agent. It is free of solvents, plasticizers and film-formin...展开 DA-6200 is a water re-dispersible powder based on vinyl acetate/ethylene copolymer containing polyvinyl alcohol as a protective colloid. DA-6200 contains a fine mineral filler as an anti-blocking agent. It is free of solvents, plasticizers and film-forming agents. DA-6200 is recommended for blending with inorganic binders such as cement, hydrated lime to modify mortar hydration systems, tile adhesives, EIFS, and finishing plasters. 收起 | |
| DA-652 | DCC (Dairen Chemical Corp.) | DA-652 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, the extra viscous DA-652 forms a flexible film with adhesive properties for a broad range of applications....展开 DA-652 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, the extra viscous DA-652 forms a flexible film with adhesive properties for a broad range of applications. It has a viscosity at 25 °C of 15000-25000 mPa.s. DA-652 is used as base emulsion for floor, wall, or ceiling adhesives. 收起 | |
| DA-691 | DCC (Dairen Chemical Corp.) | DA-691 is a non-plasticized, aqueous, milky white, cross-linkable copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-691 forms a flexible and soft film. It has a viscosity at 25 °C of 100-500 mPa.s. DA-691...展开 DA-691 is a non-plasticized, aqueous, milky white, cross-linkable copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-691 forms a flexible and soft film. It has a viscosity at 25 °C of 100-500 mPa.s. DA-691's main use is in EPI wood glue. 收起 | |
| DA-901 | DCC (Dairen Chemical Corp.) | DA-901 is a non-plasticized, aqueous, milky white terpolymer dispersion based on vinyl chloride, vinyl acetate and ethylene. Due to it's low Tg levels it provides a soft transparent film. It is generally used as an adhesive and provides a fire retardant p...展开 DA-901 is a non-plasticized, aqueous, milky white terpolymer dispersion based on vinyl chloride, vinyl acetate and ethylene. Due to it's low Tg levels it provides a soft transparent film. It is generally used as an adhesive and provides a fire retardant property. DA-901 is used as a general adhesive and is specially suitable for wood applications. 收起 | |
| DA-908 | DCC (Dairen Chemical Corp.) | DA-908 is an aqueous, milky white terpolymer dispersion based on vinyl chloride, vinyl acetate and ethylene. DA-908 leads to a clear film with low surface tack, and resistance to water, alkali, solvents, light, and aging. It has a Tg value of 20-30 °C and...展开 DA-908 is an aqueous, milky white terpolymer dispersion based on vinyl chloride, vinyl acetate and ethylene. DA-908 leads to a clear film with low surface tack, and resistance to water, alkali, solvents, light, and aging. It has a Tg value of 20-30 °C and is a cloudy substance initially. DA-908 is used as a base emulsion for general adhesives and EPI wood adhesives. 收起 | |
| DA-910 | DCC (Dairen Chemical Corp.) | DA-910 is a copolymer of Ethylene and Vinyl Chloride with amide functionality. It has fire retardant, water, and alkali resistance properties. It has a Tg rating of between -2 and 2 °C. DA-910 can be used as a base sealant emulsion in non-woven fabrics an...展开 DA-910 is a copolymer of Ethylene and Vinyl Chloride with amide functionality. It has fire retardant, water, and alkali resistance properties. It has a Tg rating of between -2 and 2 °C. DA-910 can be used as a base sealant emulsion in non-woven fabrics and paper binder, paper and fabric impregnation binder, flocking binder, car sheet and carpet back coating, and adhesive for high frequency curing. 收起 | |
| DA-920 | DCC (Dairen Chemical Corp.) | DA-920 is a copolymer of Ethylene and Vinyl Chloride with amide functionality. It has fire retardant, water, and alkali resistance properties. It has a Tg rating of between 18 and 22 °C. DA-920 can be used as a base sealant emulsion in non-woven fabrics a...展开 DA-920 is a copolymer of Ethylene and Vinyl Chloride with amide functionality. It has fire retardant, water, and alkali resistance properties. It has a Tg rating of between 18 and 22 °C. DA-920 can be used as a base sealant emulsion in non-woven fabrics and paper binder, paper and fabric impregnation binder, flocking binder, car sheet and carpet back coating, and adhesive for high frequency curing. 收起 | |
| DA-930 | DCC (Dairen Chemical Corp.) | DA-930 is a copolymer of Ethylene and Vinyl Chloride with amide functionality. It has fire retardant, water, and alkali resistance properties. It has a Tg rating of between 28 and 32 °C. DA-930 can be used as a base sealant emulsion in non-woven fabrics a...展开 DA-930 is a copolymer of Ethylene and Vinyl Chloride with amide functionality. It has fire retardant, water, and alkali resistance properties. It has a Tg rating of between 28 and 32 °C. DA-930 can be used as a base sealant emulsion in non-woven fabrics and paper binder, paper and fabric impregnation binder, flocking binder, car sheet and carpet back coating, and adhesive for high frequency curing. 收起 | |
| DABCO® DC 1 | Evonik Operations GmbH, BL Comfort & Insulation | DABCO® DC 1 is a geling catalyst that gives a back-end cure similar to a tin catalyst and a similar working time as an amine catalyst. It can be used alone, or at low levels with existing amine catalysts to improve back-end cure. | |
| DABCO® DC 2 | Evonik Operations GmbH, BL Comfort & Insulation | DABCO® DC 2 is a geling catalyst that gives a back-end cure similar to a tin catalyst and a similar working time as an amine catalyst. It can be used alone, or at low levels with existing amine catalysts to improve back-end cure. DABCO® DC 2 is more reac...展开 DABCO® DC 2 is a geling catalyst that gives a back-end cure similar to a tin catalyst and a similar working time as an amine catalyst. It can be used alone, or at low levels with existing amine catalysts to improve back-end cure. DABCO® DC 2 is more reactive than DABCO® DC 1. 收起 | |
| DAPRO® DF 696 | Elementis | DAPRO® DF 696 is a highly efficient grind defoamer composed of foam destroying particles, modified silicone and polypropylene glycol. It is specially developed for optimum foam control in grinding process of pigments and fillers dispersions. DAPRO® DF 696...展开 DAPRO® DF 696 is a highly efficient grind defoamer composed of foam destroying particles, modified silicone and polypropylene glycol. It is specially developed for optimum foam control in grinding process of pigments and fillers dispersions. DAPRO® DF 696 works effectively in various water- based inks and coatings applications. It is easy to incorporate and disperses well into a wide range of formulations with excellent performance. 收起 | Request Sample |
| Deco-Coat DC-2501R | Epoxies, Etc. | Deco-Coat DC-2501R is a two part, high gloss, epoxy resin that forms a hard enamel "bubble free" finish. It is solvent- and odor-free, produces a tough, durable coating, and displays excellent adhesion. This product is ideal for applications such as costu...展开 Deco-Coat DC-2501R is a two part, high gloss, epoxy resin that forms a hard enamel "bubble free" finish. It is solvent- and odor-free, produces a tough, durable coating, and displays excellent adhesion. This product is ideal for applications such as costume and fashion jewelry, decals, labels, pins, emblems, and wooden floors and tables. 收起 | |
| Deco-Coat DC-2510 | Epoxies, Etc. | Deco-Coat DC-2510 is an ultra clear, two part, rigid epoxy doming resin. It is a low viscosity formulation with UV stabilizers and other additives which helps prevent premature yellowing and degradation. It will cure at room temperature or may be accelera...展开 Deco-Coat DC-2510 is an ultra clear, two part, rigid epoxy doming resin. It is a low viscosity formulation with UV stabilizers and other additives which helps prevent premature yellowing and degradation. It will cure at room temperature or may be accelerated with mild heat and contains a proprietary air release additive which allows for an air bubble free high gloss dome coating. 收起 | |
| Deco-Coat DC-2550 | Epoxies, Etc. | Deco-Coat DC-2550 is a low viscosity, two part, flexible epoxy doming resin that cures at room temperature to form a “bubble free”, flexible coating, impervious to moisture and chemicals. Exhibiting excellent adhesion to a variety of substrates, this prod...展开 Deco-Coat DC-2550 is a low viscosity, two part, flexible epoxy doming resin that cures at room temperature to form a “bubble free”, flexible coating, impervious to moisture and chemicals. Exhibiting excellent adhesion to a variety of substrates, this product is ideal for use in applications such as labels, plaques, emblems, badges, key & luggage tags, and wood trim kits. 收起 | |
| Decotherm™ 100 E | Lawter | Decotherm™ 100 E is a gel varnish from rosin-based resin, gelling agents, alkyd resin and mineral distillates. It displays high gloss, has fast drying and curing abilities with good adhesion to steel, aluminum and tin. The product is used in inks printed ...展开 Decotherm™ 100 E is a gel varnish from rosin-based resin, gelling agents, alkyd resin and mineral distillates. It displays high gloss, has fast drying and curing abilities with good adhesion to steel, aluminum and tin. The product is used in inks printed on steel, flat tin or aluminum products. 收起 | |
| Decotherm™ 220 E | Lawter | Decotherm™ 220 E is a polyester resin dissolved in Dobanol 23 and tridecylalcohol in metal deco inks for dry offset or spindle printing on a 2-piece decorative can. It shows good adhesion to metals with a high gloss, good printability, transfer and MEK re...展开 Decotherm™ 220 E is a polyester resin dissolved in Dobanol 23 and tridecylalcohol in metal deco inks for dry offset or spindle printing on a 2-piece decorative can. It shows good adhesion to metals with a high gloss, good printability, transfer and MEK resistance. Other applications include uses in white and colored inks. 收起 | |
| Decotherm™ 255 E | Lawter | Decotherm™ 255 E is a blocked catalyst acid that is dissolved in TXIB and is used to catalyze the cure of melamine and polyester resins at higher temperatures. Its has a fast cure speed and is meant for metal deco inks that are printed with spindle printi...展开 Decotherm™ 255 E is a blocked catalyst acid that is dissolved in TXIB and is used to catalyze the cure of melamine and polyester resins at higher temperatures. Its has a fast cure speed and is meant for metal deco inks that are printed with spindle printing or dry offsets for 2-piece decorative cans. Other applications include colored or white inks. 收起 | |
| Decotherm™ 260 E | Lawter | Decotherm™ 260 E is a polyester resin dissolved in tripropylene glycol that has the benefit of high pigment wetting, gloss, flow and transfer on high speed presses. It also has good adhesion to metals which is why it is considered ideal for use in metal d...展开 Decotherm™ 260 E is a polyester resin dissolved in tripropylene glycol that has the benefit of high pigment wetting, gloss, flow and transfer on high speed presses. It also has good adhesion to metals which is why it is considered ideal for use in metal deco inks. Such inks use the spindle printing or dry offset system of printing on 2-piece cans. 收起 | |
| Decotherm™ 290 E | Lawter | Decotherm™ 290 E is a structured polyester resin that has low tack and misting properties, shows good transfer on high speed presses and displays adhesion to metals. It is used in metal deco inks using the spindle printing or dry offset method for 2-piece...展开 Decotherm™ 290 E is a structured polyester resin that has low tack and misting properties, shows good transfer on high speed presses and displays adhesion to metals. It is used in metal deco inks using the spindle printing or dry offset method for 2-piece cans. It shows good color retention and is also used in white and colored ink applications. 收起 | |
| Deep Chrome Yellow | Hangzhou Tiankai (China) Enterprise Co., Ltd. | Deep Chrome Yellow is an inorganic chromium yellow pigment. This product appears as a dark yellow powder and has a relative tinting strength of 95%, and it functions as a colorant in paints and inks. | |
| Defoamer FL 1 Conc. | Ichemco | Defoamer FL 1 Conc. is a non-siliconic, organic defoamer. This product has a Brookfield viscosity at 25°C of 500-1500 mPa.s. Defoamer FL 1 Conc. is most commonly used as a defoaming agent in water-based paint, plaster, and adhesive emulsion applications. | |
| Defoamer FL 9 | Ichemco | Defoamer FL 9 is a defoaming emulsion based on organo-modified siloxanes. This product has a total solids content of 24-28% and a Brookfield viscosity at 25°C of 220-620 mPa.s. Defoamer FL 9 is most commonly used as a defoaming agent in pressure sensitive...展开 Defoamer FL 9 is a defoaming emulsion based on organo-modified siloxanes. This product has a total solids content of 24-28% and a Brookfield viscosity at 25°C of 220-620 mPa.s. Defoamer FL 9 is most commonly used as a defoaming agent in pressure sensitive adhesive applications. 收起 | |
| DEGACRYL® HS 4792 L | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4792 L is an organic solution based on ethyl methacrylate. It is suitable as a heat seal binder for sealing aluminium foil versus polystyrene (PS), vinyl (PVC) or polyvinylidene chloride (PVdC). DEGACRYL® HS 4792 L is tailormade for applicati...展开 DEGACRYL® HS 4792 L is an organic solution based on ethyl methacrylate. It is suitable as a heat seal binder for sealing aluminium foil versus polystyrene (PS), vinyl (PVC) or polyvinylidene chloride (PVdC). DEGACRYL® HS 4792 L is tailormade for applications where low temperature sealing and easy peel behavior are required. In formulations with PVC copolymer DEGACRYL® HS 4792 L will achieve good adhesion to aluminium. 收起 | Request Sample |
| Deuteron OG 8803 | Deuteron | Deuteron OG 8803 is based on polymethyl urea resin (PMU) as the active ingredient. Features of the duroplastic active ingredient are its high hardness and abrasion resistance. It is resistant to most standard solvents used in coatings and has good thermal...展开 Deuteron OG 8803 is based on polymethyl urea resin (PMU) as the active ingredient. Features of the duroplastic active ingredient are its high hardness and abrasion resistance. It is resistant to most standard solvents used in coatings and has good thermal stability of over 200°C. When used as an additive in radically curing coatings systems, Deuteron OG 880x improves the static and dynamic friction of the coatings and provides improved mechanical resistance. Compared to wax-based additives, Deuteron OG 880x does not adversely affect the recoatability recoated. The very fine solid particles (PMU) allows the products to be used in coating systems that are applied as extremely thin films. The gloss reduction is dependant on the type of employed binder, the applied film thickness and the selected dosage. Therefore the reduction in gloss that can be achieved with Deuteron OG 880x can be customised to realise a variety of surface protection and matting objectives. Deuteron OG 880x is intended for use in radiation curing coatings and printing inks. They are particularly recommended for use in systems which require a thin film thickness, e.g. printing inks and overprinting lacquers. The use of Deuteron OG 880x can substantially improve coatings (ranging from silky sheen to matt) which contain silicic acid as a matting agent and possess inadequate surface resistance. 收起 | Request Sample |
| Deuteron OG 8805 | Deuteron | Deuteron OG 8805 is based on polymethyl urea resin (PMU) as the active ingredient. Features of the duroplastic active ingredient are its high hardness and abrasion resistance. It is resistant to most standard solvents used in coatings and has good thermal...展开 Deuteron OG 8805 is based on polymethyl urea resin (PMU) as the active ingredient. Features of the duroplastic active ingredient are its high hardness and abrasion resistance. It is resistant to most standard solvents used in coatings and has good thermal stability of over 200°C. When used as an additive in radically curing coatings systems, Deuteron OG 880x improves the static and dynamic friction of the coatings and provides improved mechanical resistance. Compared to wax-based additives, Deuteron OG 880x does not adversely affect the recoatability recoated. The very fine solid particles (PMU) allows the products to be used in coating systems that are applied as extremely thin films. The gloss reduction is dependant on the type of employed binder, the applied film thickness and the selected dosage. Therefore the reduction in gloss that can be achieved with Deuteron OG 880x can be customised to realise a variety of surface protection and matting objectives. Deuteron OG 880x is intended for use in radiation curing coatings and printing inks. They are particularly recommended for use in systems which require a thin film thickness, e.g. printing inks and overprinting lacquers. The use of Deuteron OG 880x can substantially improve coatings (ranging from silky sheen to matt) which contain silicic acid as a matting agent and possess inadequate surface resistance. 收起 | Request Sample |
| Deuteron OG 8807 | Deuteron | Deuteron OG 8807 is based on polymethyl urea resin (PMU) as the active ingredient. Features of the duroplastic active ingredient are its high hardness and abrasion resistance. It is resistant to most standard solvents used in coatings and has good thermal...展开 Deuteron OG 8807 is based on polymethyl urea resin (PMU) as the active ingredient. Features of the duroplastic active ingredient are its high hardness and abrasion resistance. It is resistant to most standard solvents used in coatings and has good thermal stability of over 200°C. When used as an additive in radically curing coatings systems, Deuteron OG 880x improves the static and dynamic friction of the coatings and provides improved mechanical resistance. Compared to wax-based additives, Deuteron OG 880x does not adversely affect the recoatability recoated. The very fine solid particles (PMU) allows the products to be used in coating systems that are applied as extremely thin films. The gloss reduction is dependant on the type of employed binder, the applied film thickness and the selected dosage. Therefore the reduction in gloss that can be achieved with Deuteron OG 880x can be customised to realise a variety of surface protection and matting objectives. Deuteron OG 880x is intended for use in radiation curing coatings and printing inks. They are particularly recommended for use in systems which require a thin film thickness, e.g. printing inks and overprinting lacquers. The use of Deuteron OG 880x can substantially improve coatings (ranging from silky sheen to matt) which contain silicic acid as a matting agent and possess inadequate surface resistance. 收起 | Request Sample |
| Deuteron ST | Deuteron | Deuteron ST texturing agent can be used in both solvent-based and water-based coating systems. Potential applications include coil-coating systems and coatings for plastic surfaces. The Deuteron ST product line can be used to customize the haptical and op...展开 Deuteron ST texturing agent can be used in both solvent-based and water-based coating systems. Potential applications include coil-coating systems and coatings for plastic surfaces. The Deuteron ST product line can be used to customize the haptical and optical surface properties. They can also be used as a functional additive to reduce the coefficient of sliding friction. The texturing agents have different particle size distributions. The coarser grade induces more intense texturing with good maintenance of gloss. The finer grade gives finer texturing. Depending on the specific formulation this can lead to a reduction in the degree of gloss. The coarser fractions are responsible for the texturing, whilst the finer particles can lead to matting. Depending on the duration of exposure to heat, the texturing agents are thermally stable to well over 200 °C. The products do not melt which distinguishes them from wax and amide-based products. The texturing agents are resistant to most customary solvents. 收起 | Request Sample |
| Deuteron ST-G | Deuteron | Deuteron ST-G texturing agent can be used in both solvent-based and water-based coating systems. Potential applications include coil-coating systems and coatings for plastic surfaces. The Deuteron ST product line can be used to customize the haptical and ...展开 Deuteron ST-G texturing agent can be used in both solvent-based and water-based coating systems. Potential applications include coil-coating systems and coatings for plastic surfaces. The Deuteron ST product line can be used to customize the haptical and optical surface properties. They can also be used as a functional additive to reduce the coefficient of sliding friction. The texturing agents have different particle size distributions. The coarser grade induces more intense texturing with good maintenance of gloss. The finer grade gives finer texturing. Depending on the specific formulation this can lead to a reduction in the degree of gloss. The coarser fractions are responsible for the texturing, whilst the finer particles can lead to matting. Depending on the duration of exposure to heat, the texturing agents are thermally stable to well over 200 °C. The products do not melt which distinguishes them from wax and amide-based products. The texturing agents are resistant to most customary solvents. 收起 | Request Sample |
| Deuteron ST-L | Deuteron | Deuteron ST-L texturing agent can be used in both solvent-based and water-based coating systems. Potential applications include coil-coating systems and coatings for plastic surfaces. The Deuteron ST product line can be used to customize the haptical and ...展开 Deuteron ST-L texturing agent can be used in both solvent-based and water-based coating systems. Potential applications include coil-coating systems and coatings for plastic surfaces. The Deuteron ST product line can be used to customize the haptical and optical surface properties. They can also be used as a functional additive to reduce the coefficient of sliding friction. The texturing agents have different particle size distributions. The coarser grade induces more intense texturing with good maintenance of gloss. The finer grade gives finer texturing. Depending on the specific formulation this can lead to a reduction in the degree of gloss. The coarser fractions are responsible for the texturing, whilst the finer particles can lead to matting. Depending on the duration of exposure to heat, the texturing agents are thermally stable to well over 200 °C. The products do not melt which distinguishes them from wax and amide-based products. The texturing agents are resistant to most customary solvents. 收起 | Request Sample |
| Deuteron ST-M | Deuteron | Deuteron ST-M texturing agent can be used in both solvent-based and water-based coating systems. Potential applications include coil-coating systems and coatings for plastic surfaces. The Deuteron ST product line can be used to customize the haptical and ...展开 Deuteron ST-M texturing agent can be used in both solvent-based and water-based coating systems. Potential applications include coil-coating systems and coatings for plastic surfaces. The Deuteron ST product line can be used to customize the haptical and optical surface properties. They can also be used as a functional additive to reduce the coefficient of sliding friction. The texturing agents have different particle size distributions. The coarser grade induces more intense texturing with good maintenance of gloss. The finer grade gives finer texturing. Depending on the specific formulation this can lead to a reduction in the degree of gloss. The coarser fractions are responsible for the texturing, whilst the finer particles can lead to matting. Depending on the duration of exposure to heat, the texturing agents are thermally stable to well over 200 °C. The products do not melt which distinguishes them from wax and amide-based products. The texturing agents are resistant to most customary solvents. 收起 | Request Sample |
| Deuteron ST-S | Deuteron | Deuteron ST-S texturing agent can be used in both solvent-based and water-based coating systems. Potential applications include coil-coating systems and coatings for plastic surfaces. The Deuteron ST product line can be used to customize the haptical and ...展开 Deuteron ST-S texturing agent can be used in both solvent-based and water-based coating systems. Potential applications include coil-coating systems and coatings for plastic surfaces. The Deuteron ST product line can be used to customize the haptical and optical surface properties. They can also be used as a functional additive to reduce the coefficient of sliding friction. The texturing agents have different particle size distributions. The coarser grade induces more intense texturing with good maintenance of gloss. The finer grade gives finer texturing. Depending on the specific formulation this can lead to a reduction in the degree of gloss. The coarser fractions are responsible for the texturing, whilst the finer particles can lead to matting. Depending on the duration of exposure to heat, the texturing agents are thermally stable to well over 200 °C. The products do not melt which distinguishes them from wax and amide-based products. The texturing agents are resistant to most customary solvents. 收起 | Request Sample |
| Diarylide Yellow AAMX/AAOT | Hangzhou Tiankai (China) Enterprise Co., Ltd. | Diarylide Yellow AAMX/AAOT is a yellow pigment that has strong coloring powder, good heat resistance, low viscosity, and good light permanency. This product has a density of 1.32 g/cm3 and a pH value of 6.0-7.0, and it is commonly used in offset inks. | |
| Diluente 70/30 | Ichemco | Diluente 70/30 is a solvent blend of 70% ethyl alcohol and 30% ethyl acetate. This product is most commonly used in nitrocellulose ink dilution applications. | |
| Diluente C Nitro | Ichemco | Diluente C Nitro is an ink thinner. This product is most commonly used as a thinner in Color Ink PP Nitro applications. | |
| Diluente C PAM | Ichemco | Diluente C PAM is a solvent blend for polyamidic printing inks. This product is most commonly used to restore evaporated solvents in old inks. | |
| Diluente C PVC | Ichemco | Diluente C PVC is a blend of methyl ethyl ketone and ethyl acetate. This product is most commonly used to dilute Color Ink PVC products. | |
| Disper AC 8 | Ichemco | Disper AC 8 is a water-based solution of polyacrylate. This product has a total solids content of 40-42% and a Brookfield viscosity at 25°C of 200-500 cPs. Disper AC 8 is most commonly used as a dispersing agent for fillers and pigments in water-based p...展开 Disper AC 8 is a water-based solution of polyacrylate. This product has a total solids content of 40-42% and a Brookfield viscosity at 25°C of 200-500 cPs. Disper AC 8 is most commonly used as a dispersing agent for fillers and pigments in water-based paint applications. 收起 | |
| Dispurez® 103 | Incorez Ltd. | Dispurez® 103 is a flexible, toughened polyurethane dispersion that forms films with excellent optical clarity and good chemical and block resistance. Upon application, the water evaporates to yield a tough and flexible transparent film. Films derived fro...展开 Dispurez® 103 is a flexible, toughened polyurethane dispersion that forms films with excellent optical clarity and good chemical and block resistance. Upon application, the water evaporates to yield a tough and flexible transparent film. Films derived from Dispurez® 103 exhibit good chemical, stain and hydrolysis resistance, making them a suitable non-hazardous foundation for durable rigid plastics, flexible films and waterproofing applications. 收起 | Request Sample |
| Disvacryl-1000 | D.S.V. Chemicals Pvt. Ltd. | Disvacryl-1000 is a thermoplastic acrylic resin. This product includes xylene as volatile byproducts. It can be used in high-quality air-drying finishes for metal, wood, concrete, and masonry. | |
| Disvaket-100 | D.S.V. Chemicals Pvt. Ltd. | Disvaket-100 is a ketonic resin. This product has a melting point range of 85-95 degrees Celsius. It can be used in flexo and gravure inks for polypropylene and BOPP, as well as in nitrocellulose lacquers and paper varnishes. | |
| Disvaket-200 | D.S.V. Chemicals Pvt. Ltd. | Disvaket-200 is a ketonic resin. This product's melting point range is 105-115 degrees Celsius. It can be used in ballpoint inks and in wood lacquers. | |
| Disvalkyd-500 | D.S.V. Chemicals Pvt. Ltd. | Disvalkyd-500 is an alkyd resin made from long oils. This product derives from linseed oil and has been modified with a glycerine polyol. It can be used in heat-set and gloss printing inks. | |
| Disvalkyd-501 | D.S.V. Chemicals Pvt. Ltd. | Disvalkyd-501 is an alkyd resin made with long oils. This product derives from linseed oil. It is ideal for use in letterpress, offset, and screen printing inks. | |
| Disvalkyd-502 | D.S.V. Chemicals Pvt. Ltd. | Disvalkyd-502 is an alkyd resin made with long oils. This product derives from linseed oil. It is ideal for use in letterpress, offset, and screen printing inks. | |
| Disvalkyd-503 | D.S.V. Chemicals Pvt. Ltd. | Disvalkyd-503 is an alkyd resin made with long oils. This product derives from linseed oil. It can be used in letterpress, offset and screen printing inks. It can also be used in high-gloss enamels. | |
| Disvalkyd-507 | D.S.V. Chemicals Pvt. Ltd. | Disvalkyd-507 is an alkyd resin made with long oils. This product is made with linseed oil. It can be used in letterpress, offset, and screen inks. | |
| Disvalkyd-552 | D.S.V. Chemicals Pvt. Ltd. | Disvalkyd-552 is an alkyd resin made with medium-length oils. This product is made with linseed oils and glycerine or penta polyols. It can be used in industrial or decorative paints and undercoatings. | |
| Disvalkyd-555 | D.S.V. Chemicals Pvt. Ltd. | Disvalkyd-555 is an alkyd resin made with medium-length oils. This product derives from soybean oil. It can be used in decorative enamels and roller-coated enamels or varnishes that have good colour and colour retention. | |
| Disvalkyd-563 | D.S.V. Chemicals Pvt. Ltd. | Disvalkyd-563 is an alkyd resin made with long oils. This product derives from soybean oil. It can be used in white thermoplastic inks that require multiple stoving processes. | |
| Disvamide-603 | D.S.V. Chemicals Pvt. Ltd. | Disvamide-603 is a non-reactive polyamide resin. This product is soluble in co-solvents. It can be used in flexo and gravure inks for treated polythene and polypropylene films. | |
| Disvamide-605 | D.S.V. Chemicals Pvt. Ltd. | Disvamide-605 is a non-reactive polyamide resin. This product is soluble in co-solvents. It can be used in flexo and gravure inks for treated polythene and polypropylene films. | |
| Disvamide-605 HV | D.S.V. Chemicals Pvt. Ltd. | Disvamide-605 HV is a non-reactive polyamide resin. This product is soluble in co-solvents. It can be used in flexo and gravure inks for treated polythene and polypropylene films. | |
| Disvamide-610 | D.S.V. Chemicals Pvt. Ltd. | Disvamide-610 is a non-reactive polyamide resin. This product is soluble in alcohol and compatible with nitrocellulose. It can be used in flexo and gravure inks for treated polythene and polyethylene. | |
| Disvamide-611 | D.S.V. Chemicals Pvt. Ltd. | Disvamide-611 is a non-reactive polyamide resin. This product is soluble in alcohol and compatible with nitrocellulose. It can be used in flexo and gravure inks for treated polyethylene and polypropylene. | |
| Disvamide-615 | D.S.V. Chemicals Pvt. Ltd. | Disvamide-615 is a reactive polyamide resin. This product appears as a highly viscous liquid. It can be used in general-purpose epoxy polyamide coatings that provide excellent resistance, as well as in epoxy adhesives. | |
| Disvamide-625 | D.S.V. Chemicals Pvt. Ltd. | Disvamide-625 is a reactive polyamide resin. This product appears as a viscous liquid. It can be used as a curing agent for epoxy-based adhesives and coatings. | |
| Disvamide-640 | D.S.V. Chemicals Pvt. Ltd. | Disvamide-640 is a reactive polyamide resin. This product appears as a viscous liquid. It can be used as a curing agent for epoxy-based adhesives and coatings. |
