| DEGACRYL® HS 4150 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4150 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyeth...展開 DEGACRYL® HS 4150 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene therephthalate (PET) or vinyl (PVC). DEGACRYL® HS 4150 E will give good adhesion to aluminium in formulation with PVC-copolymer. Primered with polyester like DYNAPOL® L 206 or 208[1] adhesion to PET is achieved. 收起 | Request Sample |
| DEGACRYL® HS 4151 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4151 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is applied as an universal binder in PVC free, primerless heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyre...展開 DEGACRYL® HS 4151 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is applied as an universal binder in PVC free, primerless heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene terephthalate (PET) or vinyl (PVC). Primered with polyesters like DYNAPOL® L 206 / 208[1] adhesion to PET is achieved. 收起 | Request Sample |
| DEGACRYL® HS 4174 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4174 E is an organic dispersion of copolymers on methacrylic esters, olefins and polyesters basis. DEGACRYL® HS 4174 E achieves direct adhesion on aluminium and PET. Usage as an universal binder in PVC-free heat seal lacquers for sealing alum...展開 DEGACRYL® HS 4174 E is an organic dispersion of copolymers on methacrylic esters, olefins and polyesters basis. DEGACRYL® HS 4174 E achieves direct adhesion on aluminium and PET. Usage as an universal binder in PVC-free heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene terephthalate (PET) or vinyl (PVC). 收起 | Request Sample |
| DEGACRYL® HS 4220 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4220 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyet...展開 DEGACRYL® HS 4220 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene therephthalate (PET) or vinyl (PVC). DEGACRYL® HS 4220 E will achieve good adhesion to aluminium in formulation with PVC-copolymer. Primered with polyester like DYNAPOL® L 206 or 208[1] adhesion to PET is achieved. Due to narrow molecular weight distribution, rub-off deposits can be minimized which leads to higher productivity. 收起 | Request Sample |
| DEGACRYL® HS 4221 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4221 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is applied as an universal binder in PVC free, primerless heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyre...展開 DEGACRYL® HS 4221 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is applied as an universal binder in PVC free, primerless heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene terephthalate (PET) or vinyl (PVC). Primed with polyesters like DYNAPOL® L 206 / 208[1] adhesion to PET is achieved. Due to narrow molecular weight distribution, rub-off deposits can be minimized which leads to higher productivity. 收起 | Request Sample |
| DEGACRYL® HS 4240 D | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4240 D is an aqueous emulsion of a thermoplastic, pure acrylic resin. Major application is binder for sealing aluminium foil versus polystyrene (PS), vinyl (PVC) or polyvinylidene chloride (PVdC). DEGACRYL® HS 4240 D achieves direct adhesion ...展開 DEGACRYL® HS 4240 D is an aqueous emulsion of a thermoplastic, pure acrylic resin. Major application is binder for sealing aluminium foil versus polystyrene (PS), vinyl (PVC) or polyvinylidene chloride (PVdC). DEGACRYL® HS 4240 D achieves direct adhesion to aluminum, no primer is required. 收起 | Request Sample |
| DEGACRYL® HS 4250 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4250 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyeth...展開 DEGACRYL® HS 4250 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene terephthalate (PET) or vinyl (PVC). DEGACRYL® HS 4250 E will achieve good adhesion to aluminium in formulation with PVC-copolymer. Primed with polyesters like DYNAPOL® L 206 / 208[1] adhesion to PET is achieved. Due to narrow molecular weight distribution, rub-off deposits can be minimized which leads to higher productivity. Additionally, DEGACRYL® VP 4250 E has a higher solid content compared to the equivalent grade DEGACRYL® 4150 E. 收起 | Request Sample |
| DEGACRYL® HS 4251 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4251 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. DEGACRYL® HS 4251 E is applied as an universal binder in PVC-free heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), poly...展開 DEGACRYL® HS 4251 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. DEGACRYL® HS 4251 E is applied as an universal binder in PVC-free heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene therephthalate (PET) or vinyl (PVC). Primed with polyesters like DYNAPOL® L 206 / 208[1] adhesion to PET is achieved. Due to narrow molecular weight distribution, rub-off deposits can be minimized which leads to higher productivity. Additionally, DEGACRYL® HS 4251 E has a higher solid content compared to the equivalent grade DEGACRYL® HS 4151 E. 收起 | Request Sample |
| DEGACRYL® HS 4294 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4294 E is an organic dispersion of copolymers on methacrylic esters, olefins and polyesters basis. It is suitable as an universal binder in PVC-free heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polysty...展開 DEGACRYL® HS 4294 E is an organic dispersion of copolymers on methacrylic esters, olefins and polyesters basis. It is suitable as an universal binder in PVC-free heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene terephthalate (PET), polylactic acid (PLA) or vinyl (PVC). Due to narrow molecular weight distribution, rub-off deposits can be minimized which leads to higher productivity. Additionally, DEGACRYL® HS 4294 E has a high solid content of 52%. 收起 | Request Sample |
| DEGACRYL® HS 4322 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4322 E is an organic dispersion of copolymers on methacrylic esters, olefins and polyesters basis. DEGACRYL® HS 4322 E achieves direct adhesion on aluminium and PET. Due to its low haze properties when dry coated, it is ideally suited for tra...展開 DEGACRYL® HS 4322 E is an organic dispersion of copolymers on methacrylic esters, olefins and polyesters basis. DEGACRYL® HS 4322 E achieves direct adhesion on aluminium and PET. Due to its low haze properties when dry coated, it is ideally suited for transparent applications. General usage is as a binder in PVC-free heat seal lacquers for sealing aluminium foil or PET film versus polystyrene (PS), polyethylene terephthalate (PET), poly lactic acid (PLA) and polyvinyl chloride (PVC). 收起 | Request Sample |
| DEGACRYL® HS 4792 L | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4792 L is an organic solution based on ethyl methacrylate. It is suitable as a heat seal binder for sealing aluminium foil versus polystyrene (PS), vinyl (PVC) or polyvinylidene chloride (PVdC). DEGACRYL® HS 4792 L is tailormade for applicati...展開 DEGACRYL® HS 4792 L is an organic solution based on ethyl methacrylate. It is suitable as a heat seal binder for sealing aluminium foil versus polystyrene (PS), vinyl (PVC) or polyvinylidene chloride (PVdC). DEGACRYL® HS 4792 L is tailormade for applications where low temperature sealing and easy peel behavior are required. In formulations with PVC copolymer DEGACRYL® HS 4792 L will achieve good adhesion to aluminium. 收起 | Request Sample |
| DEGACRYL® HS 555 | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 555 is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethyle...展開 DEGACRYL® HS 555 is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene therephthalate (PET) or vinyl (PVC). DEGACRYL® HS 555 will give good adhesion to aluminium in formulation with PVC-copolymer. Primered with polyester like DYNAPOL® L 206 or 208[1] adhesion to PET is achieved. 收起 | Request Sample |
| DEGACRYL® HS 666 | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 666 is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is applied as an universal binder in PVC free, primerless heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene ...展開 DEGACRYL® HS 666 is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is applied as an universal binder in PVC free, primerless heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene terephthalate (PET) or vinyl (PVC). Primered with polyesters like DYNAPOL® L 206 / 208[1] adhesion to PET is achieved. 收起 | Request Sample |
| Milecell 60 HPMC | MPI Chemie B.V. | Milecell 60 HPMC is hydroxy propyl methyl cellulose in the form of a white to slightly off-white fibrous or granular powder. It is used as a cellulose ether additive in paint, adhesive, and printing industries. Milecell 60 HPMC acts as a thickener, water ...展開 Milecell 60 HPMC is hydroxy propyl methyl cellulose in the form of a white to slightly off-white fibrous or granular powder. It is used as a cellulose ether additive in paint, adhesive, and printing industries. Milecell 60 HPMC acts as a thickener, water retention agent, suspension aid, and colloid protector in applications such as dispersion paints, inks, table coatings, wallpaper paste, and tile adhesives. 收起 | |
| Milecell 65 HPMC | MPI Chemie B.V. | Milecell 65 HPMC is hydroxy propyl methyl cellulose in the form of a white to slightly off-white fibrous or granular powder. It is used as a cellulose ether additive in paint, adhesive, and printing industries. Milecell 65 HPMC acts as a thickener, water ...展開 Milecell 65 HPMC is hydroxy propyl methyl cellulose in the form of a white to slightly off-white fibrous or granular powder. It is used as a cellulose ether additive in paint, adhesive, and printing industries. Milecell 65 HPMC acts as a thickener, water retention agent, suspension aid, and colloid protector in applications such as dispersion paints, inks, table coatings, wallpaper paste, and tile adhesives. 收起 | |
| Milecell 75 HPMC | MPI Chemie B.V. | Milecell 75 HPMC is hydroxy propyl methyl cellulose in the form of a white to slightly off-white fibrous or granular powder. It is used as a cellulose ether additive in paint, adhesive, and printing industries. Milecell 75 HPMC acts as a thickener, water ...展開 Milecell 75 HPMC is hydroxy propyl methyl cellulose in the form of a white to slightly off-white fibrous or granular powder. It is used as a cellulose ether additive in paint, adhesive, and printing industries. Milecell 75 HPMC acts as a thickener, water retention agent, suspension aid, and colloid protector in applications such as dispersion paints, inks, table coatings, wallpaper paste, and tile adhesives. 收起 | |
| Milecell EC Standard | MPI Chemie B.V. | Milecell EC Standard is ethyl cellulose in the form of a white powder or granules. It is used as a cellulose ether additive in paint, adhesive, and printing industries. Milecell EC Standard acts as a thickener, water retention agent, suspension aid, and c...展開 Milecell EC Standard is ethyl cellulose in the form of a white powder or granules. It is used as a cellulose ether additive in paint, adhesive, and printing industries. Milecell EC Standard acts as a thickener, water retention agent, suspension aid, and colloid protector in applications such as dispersion paints, inks, table coatings, wallpaper paste, and tile adhesives. 收起 | |
| MTD100 | Guangxi Zhongchang Resin Co., Ltd. | MTD100 is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifying...展開 MTD100 is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifying and a softening point between 90-100ºC. It can also be applied to coating and printing ink. 收起 | |
| MTD100W | Guangxi Zhongchang Resin Co., Ltd. | MTD100W is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifyin...展開 MTD100W is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifying and a softening point between 90-100ºC. It can also be applied to coating and printing ink. 收起 | |
| MTD120 | Guangxi Zhongchang Resin Co., Ltd. | MTD120 is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifying...展開 MTD120 is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifying and a softening point between 120-130ºC. It can also be applied to coating and printing ink. 收起 | |
| MTD120W | Guangxi Zhongchang Resin Co., Ltd. | MTD120W is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifyin...展開 MTD120W is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifying and a softening point between 120-130ºC. It can also be applied to coating and printing ink. 收起 | |
| MTD150 | Guangxi Zhongchang Resin Co., Ltd. | MTD150 is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifying...展開 MTD150 is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifying and a softening point between 145-160ºC. It can also be applied to coating and printing ink. 收起 | |
| MTD150W | Guangxi Zhongchang Resin Co., Ltd. | MTD150W is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifyin...展開 MTD150W is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifying and a softening point between 145-160ºC. It can also be applied to coating and printing ink. 收起 | |
| POLYVEST® 110 | Evonik Operations GmbH, BL Coating & Adhesive Resins | 應用：封閉劑和黏結劑、防腐漆、汽缸蓋襯墊浸漬、礦物基質浸漬、樹脂改性、混煉膠。供貨形式：粘性液體，不揮發份>99.8%。 | Request Sample |
| POLYVEST® 130 | Evonik Operations GmbH, BL Coating & Adhesive Resins | 應用：用於塑料涂裝的增塑劑﹔用作PUR泡沫的脫模助劑﹔用於樹脂改性﹔提高植物油的自干性能﹔室內用途的單層表面涂料（例如：機器設備用漆）的單一主體樹脂﹔可回收橡膠的主體樹脂。供貨形式：粘性液體，不揮發份>99.8%。 | Request Sample |
| POLYVEST® eCO 110 Bio | Evonik Operations GmbH, BL Coating & Adhesive Resins | POLYVEST® eCO 110 Bio is a stereospecific, low viscous, and unsaponifiable liquid polybutadiene with a high content of 1,4-cis double bonds. POLYVEST® eCO 110 Bio is compliant with the sustainability criteria laid down by the ISCC, voluntary certification...展開 POLYVEST® eCO 110 Bio is a stereospecific, low viscous, and unsaponifiable liquid polybutadiene with a high content of 1,4-cis double bonds. POLYVEST® eCO 110 Bio is compliant with the sustainability criteria laid down by the ISCC, voluntary certification, and a trusted standard. It does not differ in its physicochemical properties compared to the standard grade derived from fossil-based raw materials. Therefore, it can be used as a drop-in replacement by customers because it does not require any additional tests, requalification, or investment. POLYVEST® eCO 110 Bio brings the same well-known performance but has reduced carbon emissions. POLYVEST® eCO 110 Bio is a highly reactive binder characterized by: high chemical resistance, high water resistance, high electrical insulation properties, high cold resistance, good solubility in aliphatic, aromatics, and others, and good compatibility with hydrocarbon resins, rosin resins and zinc resonate. POLYVEST® eCO 110 Bio is used in adhesive and sealant compositions, polymer printing plates, plasticizer for rubber compounds, binder for recycled rubber compounds, electrical insulations and potting compounds, release agents for polyurethane foams, a modifier of vegetable oils, binder for oxidative drying alkyd resins, binder for dusty and dry quartz sand, binder for soil stabilization, and many more. 收起 | Request Sample |
| POLYVEST® eCO 130 Bio | Evonik Operations GmbH, BL Coating & Adhesive Resins | POLYVEST® eCO 130 Bio is a stereospecific, low viscous, and unsaponifiable liquid polybutadiene with a high content of 1,4-cis double bonds. POLYVEST® eCO 130 Bio is compliant with the sustainability criteria laid down by the ISCC, voluntary certification...展開 POLYVEST® eCO 130 Bio is a stereospecific, low viscous, and unsaponifiable liquid polybutadiene with a high content of 1,4-cis double bonds. POLYVEST® eCO 130 Bio is compliant with the sustainability criteria laid down by the ISCC, voluntary certification, and a trusted standard. It does not differ in its physicochemical properties compared to the standard grade derived from fossil-based raw materials. Therefore, it can be used as a drop-in replacement by customers because it does not require any additional tests, requalification, or investment. POLYVEST® eCO 130 Bio brings the same well-known performance but has reduced carbon emissions. The apolar, hydrophobic hydrocarbon resin POLYVEST® eCO 130 Bio is a highly reactive binder characterized by: high chemical resistance, high water resistance, high electrical insulation properties, high cold resistance, good solubility in aliphatic, aromatics, and ethers and good compatibility with hydrocarbon resins, rosin resins and zinc resonate. POLYVEST® eCO 130 Bio is used in adhesive and sealant compositions, polymer printing plates, plasticizers for rubber compounds, binders for recycled rubber compounds, release agents for polyurethane foams, cell openers for polyurethane foams, defoamers, modifiers of resin systems, a modifier of vegetable oils, binder for dusty and dry quartz sand, and many more. 收起 | Request Sample |
| POLYVEST® eCO EP MA 100 Bio | Evonik Operations GmbH, BL Coating & Adhesive Resins | POLYVEST® eCO EP MA 100 Bio is a maleic anhydride adduct of a low molecular weight 1,4-cis polybutadiene which has succinic anhydride groups randomly distributed along the polymer chains. This makes the originally apolar polybutadiene more polar and acce...展開 POLYVEST® eCO EP MA 100 Bio is a maleic anhydride adduct of a low molecular weight 1,4-cis polybutadiene which has succinic anhydride groups randomly distributed along the polymer chains. This makes the originally apolar polybutadiene more polar and accessible for various chemical reactions. POLYVEST® eCO EP MA 100 Bio is compliant with the sustainability criteria laid down by the ISCC, a voluntary certification and a trusted standard. It does not differ in its physicochemical properties compared to the standard grade derived from fossil-based raw materials. Therefore, it can be used as a drop-in replacement by customers because it does not require any additional tests, requalification, or investment. POLYVEST® eCO EP MA 100 Bio brings the same well-known performance but has reduced carbon emissions. 收起 | Request Sample |
| POLYVEST® eCO HT Bio | Evonik Operations GmbH, BL Coating & Adhesive Resins | POLYVEST® eCO HT Bio is a stereospecific, low viscous, and hydroxyl-terminated liquid polybutadiene. Due to its unsaturated polymer backbone and the terminal hydroxyl functionalities, the apolar and hydrophobic hydrocarbon resin POLYVEST® eCO HT Bio is a ...展開 POLYVEST® eCO HT Bio is a stereospecific, low viscous, and hydroxyl-terminated liquid polybutadiene. Due to its unsaturated polymer backbone and the terminal hydroxyl functionalities, the apolar and hydrophobic hydrocarbon resin POLYVEST® eCO HT Bio is a highly reactive binder providing versatile opportunities for precise chemical modifications and reactions. POLYVEST® eCO HT Bio is compliant with the sustainability criteria laid down by the ISCC, voluntary certification, and a trusted standard. It does not differ in its physicochemical properties compared to the standard grade derived from fossil-based raw materials. Therefore, it can be used as a drop-in replacement by customers because it does not require any additional tests, requalification, or investment. POLYVEST® eCO HT Bio brings the same well-known performance but has reduced carbon emissions. POLYVEST® eCO HT Bio exhibits the following features: high chemical resistance towards acids and bases, excellent water resistance, excellent electrical insulation properties, high cold resistance by keeping good flexibility at low temperatures, good solubility in aliphatics, aromatics, and ethers, low moisture and gas permeability, good adhesion to various substrates. POLYVEST® eCO HT Bio is used in adhesive and sealant compositions, insulated glass sealants, waterproofing membranes and coatings, gap fillers and expansion joints, electrical insulations and potting compounds, binder for rubber-based sealants and recycled rubber compounds, polymer modification, and many more. 收起 | Request Sample |
| POLYVEST® eCO MA 75 Bio | Evonik Operations GmbH, BL Coating & Adhesive Resins | POLYVEST® eCO MA 75 Bio is a maleic anhydride adduct of a low molecular weight 1,4-cis polybutadiene which has succinic anhydride groups randomly distributed along the polymer chains. This makes the originally apolar polybutadiene more polar and accessibl...展開 POLYVEST® eCO MA 75 Bio is a maleic anhydride adduct of a low molecular weight 1,4-cis polybutadiene which has succinic anhydride groups randomly distributed along the polymer chains. This makes the originally apolar polybutadiene more polar and accessible for various chemical reactions. POLYVEST® eCO MA 75 Bio is compliant with the sustainability criteria laid down by the ISCC, a voluntary certification and a trusted standard. It does not differ in its physicochemical properties compared to the standard grade derived from fossil-based raw materials. Therefore, it can be used as a drop-in replacement by customers because it does not require any additional tests, requalification, or investment. POLYVEST® eCO MA 75 Bio brings the same well-known performance but has reduced carbon emissions. The polar, hydrophobic hydrocarbon resin POLYVEST® eCO MA 75 Bio is a highly reactive binder featuring characterized by: high chemical resistance, high water resistance, high electrical insulation properties, high cold resistance, good solubility in aliphatic, aromatics, and ethers, good compatibility with long-oil alkyd resins, rosin resins and zinc resonates. POLYVEST® eCO MA 75 Bio is used in adhesives and sealants compositions, electrical insulations, and potting compounds (2pack systems), polymeric chalk activator in EPDM-compounds, modifier in carbon black filled EPDM-compounds, modifier in silica filled rubber compounds, modifier in rubber compounds for car tires, modifier in silicone sealants, and many more. 收起 | Request Sample |
| POLYVEST® EP MA 100 | Evonik Operations GmbH, BL Coating & Adhesive Resins | POLYVEST® EP MA 100 is a maleic anhydride adduct of a low molecular weight 1,4-cis polybutadiene which has succinic anhydride groups randomly distributed along the polymer chains. This makes the originally apolar polybutadiene more polar and accessible fo...展開 POLYVEST® EP MA 100 is a maleic anhydride adduct of a low molecular weight 1,4-cis polybutadiene which has succinic anhydride groups randomly distributed along the polymer chains. This makes the originally apolar polybutadiene more polar and accessible for various chemical reactions. 收起 | Request Sample |
| POLYVEST® HT | Evonik Operations GmbH, BL Coating & Adhesive Resins | POLYVEST® HT is a stereospecific, low viscous and hydroxyl-terminated liquid polybutadiene. Due to its unsaturated polymer backbone and the terminal hydroxyl functionalities, the apolar and hydrophobic hydrocarbon resin POLYVEST® HT is a highly reactive ...展開 POLYVEST® HT is a stereospecific, low viscous and hydroxyl-terminated liquid polybutadiene. Due to its unsaturated polymer backbone and the terminal hydroxyl functionalities, the apolar and hydrophobic hydrocarbon resin POLYVEST® HT is a highly reactive binder providing versatile opportunities for precise chemical modifications and reactions. POLYVEST® HT exhibits the following features: high chemical resistance towards acids and bases, excellent water resistance, excellent electrical insulation properties, high cold resistance by keeping good flexibility at low temperatures, good solubility in aliphatics, aromatics and ethers, low moisture and gas permeability, good adhesion to various substrates. POLYVEST® HT is used in adhesive and sealant compositions, insulated glass sealants, waterproofing membranes and coatings, gap fillers and expansion joints, electrical insulations and potting compounds, binder for rubber based sealants and recycled rubber compounds, polymer modification, and many more. 收起 | Request Sample |
| POLYVEST® MA 75 | Evonik Operations GmbH, BL Coating & Adhesive Resins | 應用：雙組分體系中的交聯劑組分，例如電纜密封劑、封閉和黏結劑、橡膠組分，特別是EPDM組分中的聚合白堊活化劑。水溶性，氧化干燥黏合劑。供貨形式：粘性液體，不揮發份>99.8%。 | Request Sample |
| RA100 | Guangxi Zhongchang Resin Co., Ltd. | RA100 is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesiv...展開 RA100 is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink, paints and electronic flux. It contains a softening point of less than or equal to 100ºC and an acid number less than or equal to 190 mgKOH/g. 收起 | |
| RA100W | Guangxi Zhongchang Resin Co., Ltd. | RA100W is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesi...展開 RA100W is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink, paints and electronic flux. It contains a softening point of less than or equal to 100ºC and an acid number less than or equal to 190 mgKOH/g. 收起 | |
| RA120 | Guangxi Zhongchang Resin Co., Ltd. | RA120 is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesiv...展開 RA120 is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink, paints and electronic flux. It contains a softening point of less than or equal to 120ºC and an acid number less than or equal to 210 mgKOH/g. 收起 | |
| RA120W | Guangxi Zhongchang Resin Co., Ltd. | RA120W is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesi...展開 RA120W is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink, paints and electronic flux. It contains a softening point of less than or equal to 120ºC and an acid number less than or equal to 210 mgKOH/g. 收起 | |
| RA140 | Guangxi Zhongchang Resin Co., Ltd. | RA140 is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesiv...展開 RA140 is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink, paints and electronic flux. It contains a softening point of less than or equal to 140ºC and an acid number less than or equal to 145 mgKOH/g. 收起 | |
| RA140W | Guangxi Zhongchang Resin Co., Ltd. | RA140W is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesi...展開 RA140W is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink, paints and electronic flux. It contains a softening point of less than or equal to 140ºC and an acid number less than or equal to 145 mgKOH/g. 收起 | |
| RA90 | Guangxi Zhongchang Resin Co., Ltd. | RA90 is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesive...展開 RA90 is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink, paints and electronic flux. It contains a softening point of less than or equal to 90ºC and an acid number less than or equal to 180 mgKOH/g. 收起 | |
| RA90W | Guangxi Zhongchang Resin Co., Ltd. | RA90W is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesiv...展開 RA90W is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink, paints and electronic flux. It contains a softening point of less than or equal to 90ºC and an acid number less than or equal to 180 mgKOH/g. 收起 | |
| RF95 | Guangxi Zhongchang Resin Co., Ltd. | RF95 is a light yellow flaky solid and a glycerol modified pentaerythritol ester. This product is designed for hot-melt adhesives and provides storage stability, hot oxidation resistance and light color in addition to tackification. It dissolves in esters...展開 RF95 is a light yellow flaky solid and a glycerol modified pentaerythritol ester. This product is designed for hot-melt adhesives and provides storage stability, hot oxidation resistance and light color in addition to tackification. It dissolves in esters, azulene ketones and aromatic hydrocarbon. 收起 | |
| RGF100 | Guangxi Zhongchang Resin Co., Ltd. | RGF100 is a light yellow flaky solid and a glycerol rosin ester used in a variety of adhesives due to its heat stability and polymer compatibility. This product has a softening point between 97-103ºC and is soluble in aromatic and aliphatic hydrocarbon so...展開 RGF100 is a light yellow flaky solid and a glycerol rosin ester used in a variety of adhesives due to its heat stability and polymer compatibility. This product has a softening point between 97-103ºC and is soluble in aromatic and aliphatic hydrocarbon solvents (petroleum benzine, mineral spirit, benzene, ethyl acetate, acetone),esters, ketones and chlorinated solvents. It is compatible with several polymers, resins, alkyds and more. 收起 | |
| RGF100W | Guangxi Zhongchang Resin Co., Ltd. | RGF100W is a light yellow flaky solid and a glycerol rosin ester used in a variety of adhesives due to its heat stability and polymer compatibility. This product has a softening point between 97-103ºC and is soluble in aromatic and aliphatic hydrocarbon s...展開 RGF100W is a light yellow flaky solid and a glycerol rosin ester used in a variety of adhesives due to its heat stability and polymer compatibility. This product has a softening point between 97-103ºC and is soluble in aromatic and aliphatic hydrocarbon solvents (petroleum benzine, mineral spirit, benzene, ethyl acetate, acetone),esters, ketones and chlorinated solvents. It is compatible with several polymers, resins, alkyds and more. 收起 | |
| RGF90 | Guangxi Zhongchang Resin Co., Ltd. | RGF90 is a light yellow flaky solid and a glycerol rosin ester used in a variety of adhesives due to its heat stability and polymer compatibility. This product has a softening point between 87-93ºC and is soluble in aromatic and aliphatic hydrocarbon solv...展開 RGF90 is a light yellow flaky solid and a glycerol rosin ester used in a variety of adhesives due to its heat stability and polymer compatibility. This product has a softening point between 87-93ºC and is soluble in aromatic and aliphatic hydrocarbon solvents (petroleum benzine, mineral spirit, benzene, ethyl acetate, acetone),esters, ketones and chlorinated solvents. It is compatible with several polymers, resins, alkyds and more. 收起 | |
| RGF90W | Guangxi Zhongchang Resin Co., Ltd. | RGF90W is a light yellow flaky solid and a glycerol rosin ester used in a variety of adhesives due to its heat stability and polymer compatibility. This product has a softening point between 87-93ºC and is soluble in aromatic and aliphatic hydrocarbon sol...展開 RGF90W is a light yellow flaky solid and a glycerol rosin ester used in a variety of adhesives due to its heat stability and polymer compatibility. This product has a softening point between 87-93ºC and is soluble in aromatic and aliphatic hydrocarbon solvents (petroleum benzine, mineral spirit, benzene, ethyl acetate, acetone),esters, ketones and chlorinated solvents. It is compatible with several polymers, resins, alkyds and more. 收起 | |
| RL10 | Guangxi Zhongchang Resin Co., Ltd. | RL10 is a light yellow flaky solid and a liquid rosin ester tackifier that contains low odor and strong stability with an acid number of less than or equal to 25 mgKOH/g. This product is most useful when a specific adhesion and wetting performance of a pr...展開 RL10 is a light yellow flaky solid and a liquid rosin ester tackifier that contains low odor and strong stability with an acid number of less than or equal to 25 mgKOH/g. This product is most useful when a specific adhesion and wetting performance of a premium rosin ester is required. It can also be applied to sealants and coatings. 收起 | |
| RL10W | Guangxi Zhongchang Resin Co., Ltd. | RL10W is a light yellow flaky solid and a liquid rosin ester tackifier that contains low odor and strong stability with an acid number of less than or equal to 20 mgKOH/g. This product is most useful when a specific adhesion and wetting performance of a p...展開 RL10W is a light yellow flaky solid and a liquid rosin ester tackifier that contains low odor and strong stability with an acid number of less than or equal to 20 mgKOH/g. This product is most useful when a specific adhesion and wetting performance of a premium rosin ester is required. It can also be applied to sealants and coatings. 收起 | |
| Rosin Modified Phenolic Resin - 2112 | Guangxi Zhongchang Resin Co., Ltd. | Rosin Modified Phenolic Resin - 2112 is a product of esterification derived from glycerol (or pentaerythrite) with the polycondensate of rosin. This product has a softening point less than or equal to 135ºC and an acid number less than or equal to 20. It ...展開 Rosin Modified Phenolic Resin - 2112 is a product of esterification derived from glycerol (or pentaerythrite) with the polycondensate of rosin. This product has a softening point less than or equal to 135ºC and an acid number less than or equal to 20. It is soluble in hydrocarbon, aroma, ester, ketone, benzine, benzene, ethyl benzine, spirit and turpentine for use in paint, printing ink and adhesives. 收起 | |
| Rosin Modified Phenolic Resin - 2116 | Guangxi Zhongchang Resin Co., Ltd. | Rosin Modified Phenolic Resin - 2116 is a product of esterification derived from glycerol (or pentaerythrite) with the polycondensate of rosin. This product has a softening point less than 151ºC and an acid number less than or equal to 18. It is soluble i...展開 Rosin Modified Phenolic Resin - 2116 is a product of esterification derived from glycerol (or pentaerythrite) with the polycondensate of rosin. This product has a softening point less than 151ºC and an acid number less than or equal to 18. It is soluble in hydrocarbon, aroma, ester, ketone, benzine, benzene, ethyl benzine, spirit and turpentine for use in paint, printing ink and adhesives. 收起 | |
| Rosin Modified Phenolic Resin - 2118 | Guangxi Zhongchang Resin Co., Ltd. | Rosin Modified Phenolic Resin - 2118 is a product of esterification derived from glycerol (or pentaerythrite) with the polycondensate of rosin. This product has a softening point less than 157ºC and an acid number less than or equal to 20. It is soluble i...展開 Rosin Modified Phenolic Resin - 2118 is a product of esterification derived from glycerol (or pentaerythrite) with the polycondensate of rosin. This product has a softening point less than 157ºC and an acid number less than or equal to 20. It is soluble in hydrocarbon, aroma, ester, ketone, benzine, benzene, ethyl benzine, spirit and turpentine for use in paint, printing ink and adhesives. 收起 | |
| Rosin Pentaerythrite Ester - 145 | Guangxi Zhongchang Resin Co., Ltd. | Rosin Pentaerythrite Ester - 145 is the produce of esterification of rosin with pentaerythrite. This product dissolves in ester ,ketone and aromatic hydrocarbon and mixes well with polymers. It is used to increase initial adhesive strength of various kind...展開 Rosin Pentaerythrite Ester - 145 is the produce of esterification of rosin with pentaerythrite. This product dissolves in ester ,ketone and aromatic hydrocarbon and mixes well with polymers. It is used to increase initial adhesive strength of various kinds of adhesive. 收起 | |
| RPF100 | Guangxi Zhongchang Resin Co., Ltd. | RPF100 is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 97-103ºC, a gardner color of less than four and an acid number less than or equal to 20 mgKOH/g. It provides dissolvability in low ...展開 RPF100 is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 97-103ºC, a gardner color of less than four and an acid number less than or equal to 20 mgKOH/g. It provides dissolvability in low carbon alcohol, light color aging resistance and light resistance that is widely used in alcohol soluble and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink and electronic flux. 收起 | |
| RPF100A | Guangxi Zhongchang Resin Co., Ltd. | RPF100A is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 97-103ºC, a gardner color of less than four and an acid number less than or equal to 30 mgKOH/g. It provides dissolvability in low...展開 RPF100A is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 97-103ºC, a gardner color of less than four and an acid number less than or equal to 30 mgKOH/g. It provides dissolvability in low carbon alcohol, light color aging resistance and light resistance that is widely used in alcohol soluble and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink and electronic flux. 收起 | |
| RPF100B | Guangxi Zhongchang Resin Co., Ltd. | RPF100B is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 97-103ºC, a gardner color of less than five and an acid number less than or equal to 40 mgKOH/g. It provides dissolvability in low...展開 RPF100B is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 97-103ºC, a gardner color of less than five and an acid number less than or equal to 40 mgKOH/g. It provides dissolvability in low carbon alcohol, light color aging resistance and light resistance that is widely used in alcohol soluble and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink and electronic flux. 收起 | |
| RPF100W | Guangxi Zhongchang Resin Co., Ltd. | RPF100W is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 97-103ºC, a gardner color of less than one and an acid number less than or equal to 25 mgKOH/g. It provides dissolvability in low ...展開 RPF100W is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 97-103ºC, a gardner color of less than one and an acid number less than or equal to 25 mgKOH/g. It provides dissolvability in low carbon alcohol, light color aging resistance and light resistance that is widely used in alcohol soluble and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink and electronic flux. 收起 | |
| RPF90 | Guangxi Zhongchang Resin Co., Ltd. | RPF90 is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 87-93ºC, a gardner color of less than four and an acid number less than or equal to 20 mgKOH/g. It provides dissolvability in low ca...展開 RPF90 is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 87-93ºC, a gardner color of less than four and an acid number less than or equal to 20 mgKOH/g. It provides dissolvability in low carbon alcohol, light color aging resistance and light resistance that is widely used in alcohol soluble and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink and electronic flux. 收起 | |
| RPF90W | Guangxi Zhongchang Resin Co., Ltd. | RPF90W is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 87-93ºC, a gardner color of less than one and an acid number less than or equal to 25 mgKOH/g. It provides dissolvability in low ca...展開 RPF90W is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 87-93ºC, a gardner color of less than one and an acid number less than or equal to 25 mgKOH/g. It provides dissolvability in low carbon alcohol, light color aging resistance and light resistance that is widely used in alcohol soluble and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink and electronic flux. 收起 | |
| SARAWAX SX 105 | Evonik Operations GmbH, BL Coating & Adhesive Resins | SARAWAX SX 105 is a Fischer-Tropsch hard paraffin produced by Shell and distributed by Evonik. This grade is supplied in the form of prills and it has a drop point of 114-120 °C. The product can be used as a value additive for Hot melts or in plastic proc...展開 SARAWAX SX 105 is a Fischer-Tropsch hard paraffin produced by Shell and distributed by Evonik. This grade is supplied in the form of prills and it has a drop point of 114-120 °C. The product can be used as a value additive for Hot melts or in plastic processing. SARAWAX are only available from Evonik in Europe, South America, Middle East, North Africa and India. 收起 | Request Sample |
| SARAWAX SX 80 | Evonik Operations GmbH, BL Coating & Adhesive Resins | SARAWAX SX 80 is a Fischer-Tropsch hard paraffin produced by Shell and distributed by Evonik. This grade is supplied in the form of prills and it has a low congealing point of 81-86 °C. The SARAWAX SX 80 shows high crystallinity and a extremely low molecu...展開 SARAWAX SX 80 is a Fischer-Tropsch hard paraffin produced by Shell and distributed by Evonik. This grade is supplied in the form of prills and it has a low congealing point of 81-86 °C. The SARAWAX SX 80 shows high crystallinity and a extremely low molecular weight distribution. Applications include amongst others Hot melts especially for food packaging. The product is compliant to FDA and EU 10/2011 without specific migration limit. SARAWAX are only available from Evonik in Europe, South America, Middle East, North Africa and India. 收起 | Request Sample |
| VESTOPLAST® 206 | Evonik Operations GmbH, BL Coating & Adhesive Resins | VESTOPLAST 206是一種硅烷改性聚α-烯烴。應用領域：用於生產活性、潮氣固化熱熔膠和封閉劑的原材料。特別適合黏結塑料(尤其是PP)及玻璃。 | Request Sample |
| VESTOPLAST® 308 | Evonik Operations GmbH, BL Coating & Adhesive Resins | VESTOPLAST 308是一種功能化的產品。應用領域：生產黏結金屬和極性基材的熱熔膠的原材料。 | Request Sample |
| VESTOPLAST® 408 | Evonik Operations GmbH, BL Coating & Adhesive Resins | VESTOPLAST 408是一種較硬等級的產品，在負載的情況下具有出色的熱穩定性和撕裂強度。應用領域：生產織物、紙張和包裝工業用熱熔膠的原材料。 | Request Sample |
| VESTOPLAST® 508 | Evonik Operations GmbH, BL Coating & Adhesive Resins | VESTOPLAST 508是一種低黏度、長開放時間、低軟化溫度的產品。應用領域：生產衛生行業用熱熔膠及床墊的原材料。 | Request Sample |
| VESTOPLAST® 520 | Evonik Operations GmbH, BL Coating & Adhesive Resins | VESTOPLAST 520是一種較高黏度、長開放時間、低軟化溫度的產品。應用領域：生產電纜填充化合物的原材料。 | Request Sample |
| VESTOPLAST® 608 | Evonik Operations GmbH, BL Coating & Adhesive Resins | VESTOPLAST 608具有高軟化溫度及相對較低的熔化黏度。應用領域：生產紙張和包裝工業用的熱熔膠原材料。 | Request Sample |
| VESTOPLAST® 703 | Evonik Operations GmbH, BL Coating & Adhesive Resins | VESTOPLAST 703是一種低熔化黏度和短開放時間的產品。應用領域：生產包裝和電子工業用熱熔膠，以及纖維和地毯中絲線固定劑的原材料。 | Request Sample |
| VESTOPLAST® 704 | Evonik Operations GmbH, BL Coating & Adhesive Resins | VESTOPLAST 704是一種柔軟級的產品，開放時間相對較短。應用領域：生產用於衛生行業的可噴涂熱熔膠，以及商標和密封合成物的原材料。 | Request Sample |
| VESTOPLAST® 708 | Evonik Operations GmbH, BL Coating & Adhesive Resins | VESTOPLAST 708是一種相對較軟的產品，低熔化黏度、負載的情況下良好的熱穩定性。應用領域：生產衛生、紙張和包裝工業用熱熔膠，以及纖維和地毯中絲線固定劑的原材料。 | Request Sample |
| VESTOPLAST® 750 | Evonik Operations GmbH, BL Coating & Adhesive Resins | VESTOPLAST 750具有良好的撕裂強度和裂口延展性，相對較低的軟化溫度。應用領域：生產衛生和木工行業熱熔膠的原材料。 | Request Sample |
| VESTOPLAST® 751 | Evonik Operations GmbH, BL Coating & Adhesive Resins | VESTOPLAST® 751 is a high viscosity product with a medium softening point. This product can be used as a raw material for various applications such as automotive. Generally, VESTOPLAST® amorphous poly-alpha-olefins (APAO) provide the following benefits: ...展開 VESTOPLAST® 751 is a high viscosity product with a medium softening point. This product can be used as a raw material for various applications such as automotive. Generally, VESTOPLAST® amorphous poly-alpha-olefins (APAO) provide the following benefits: excellent adhesion and hot tack properties; bonding to various substrates; good cohesion and high thermal stability. 收起 | Request Sample |
| VESTOPLAST® 792 | Evonik Operations GmbH, BL Coating & Adhesive Resins | VESTOPLAST 792是一種高黏度等級、良好撕裂強度和裂口延展性的產品。應用領域：生產家具工業熱熔膠的原材料。 | Request Sample |
| VESTOPLAST® 828 | Evonik Operations GmbH, BL Coating & Adhesive Resins | VESTOPLAST 828顯示了在負載荷情況下良好的熱穩定性以及相對較短的開放時間。應用領域：生產聚合物改性瀝青的原材料，用於屋頂和橋梁﹔用於木工行業的熱熔膠﹔PP接口與利樂包(包裝工業)之間黏結的熱熔膠, 用於地毯、瓷磚和預成型汽車地毯的重型涂料化合物。 | Request Sample |
| VESTOPLAST® 888 | Evonik Operations GmbH, BL Coating & Adhesive Resins | VESTOPLAST 888是一種高黏度的產品，具有在負載荷情況下良好的熱穩定性以及相對較短的開放時間。應用領域：生產聚合物改性瀝青的原材料，用於屋頂和橋梁﹔用於木工行業的熱熔膠。 | Request Sample |
| VESTOPLAST® 891 | Evonik Operations GmbH, BL Coating & Adhesive Resins | VESTOPLAST 891是一種高黏度的產品，具有在負載荷情況下良好的熱穩定性以及相對較短的開放時間。應用領域：生產聚合物改性瀝青的原材料，用於屋頂和橋梁﹔用於木工行業的熱熔膠。 | Request Sample |
| VESTOPLAST® EP 807 | Evonik Operations GmbH, BL Coating & Adhesive Resins | VESTOPLAST® EP 807 is a low viscosity product with a high softening point and high shear adhesion failure temperature. This product can be used as a raw material for various applications amongst others automotive and packaging. By adding VESTOPLAST® EP 80...展開 VESTOPLAST® EP 807 is a low viscosity product with a high softening point and high shear adhesion failure temperature. This product can be used as a raw material for various applications amongst others automotive and packaging. By adding VESTOPLAST® EP 807 the adhesion to e.g. PP can be improved. Generally, VESTOPLAST® amorphous poly-alpha-olefins (APAO) provide the following benefits: excellent adhesion and hot tack properties; bonding to various substrates; good cohesion and high thermal stability. 收起 | Request Sample |
| VESTOPLAST® EP V2094 | Evonik Operations GmbH, BL Coating & Adhesive Resins | VESTOPLAST® EP V2094 is a low viscosity product with a an excellent hot tack and adhesion to various substrates such as PP, PE and foams.This product can be used as a raw material for various low viscosity applications especially hygiene and matresses. Lo...展開 VESTOPLAST® EP V2094 is a low viscosity product with a an excellent hot tack and adhesion to various substrates such as PP, PE and foams.This product can be used as a raw material for various low viscosity applications especially hygiene and matresses. Low process temperatures are possible with heat stability still remaining high. Generally, VESTOPLAST® amorphous poly-alpha-olefins (APAO) provide the following benefits: excellent adhesion and hot tack properties; bonding to various substrates; good cohesion and high thermal stability. 收起 | Request Sample |
| VESTOPLAST® EP V2103 | Evonik Operations GmbH, BL Coating & Adhesive Resins | VESTOPLAST® EP V2103 is a low viscosity product with a high shear adhesion failure temperature and a medium to high softening point. This product can be used as a raw material for various low viscosity applications especially packaging. In formulations, t...展開 VESTOPLAST® EP V2103 is a low viscosity product with a high shear adhesion failure temperature and a medium to high softening point. This product can be used as a raw material for various low viscosity applications especially packaging. In formulations, the polymer shows a very short setting time which enables for fast production processes. Generally, VESTOPLAST® amorphous poly-alpha-olefins (APAO) provide the following benefits: excellent adhesion and hot tack properties; bonding to various substrates; good cohesion and high thermal stability. 收起 | Request Sample |
| VESTOPLAST® S | Evonik Operations GmbH, BL Coating & Adhesive Resins | 用於制造道路建設用聚合物改性瀝青的原材料。 | Request Sample |
| VESTOPLAST® SR | Evonik Operations GmbH, BL Coating & Adhesive Resins | 用於制造道路建設用聚合物改性瀝青的原材料。 | Request Sample |
| VESTOWAX® C 20 Flakes/Micro prills | Evonik Operations GmbH, BL Coating & Adhesive Resins | 氧化費-托蠟。 | Request Sample |
| VESTOWAX® C 60 Powder | Evonik Operations GmbH, BL Coating & Adhesive Resins | 氧化費-托蠟。 | Request Sample |
| VESTOWAX® C 60 Prills | Evonik Operations GmbH, BL Coating & Adhesive Resins | 氧化費-托蠟。 | Request Sample |
| VESTOWAX® C40 Micro prills | Evonik Operations GmbH, BL Coating & Adhesive Resins | VESTOWAX® C40 is a Fischer-Tropsch wax oxidate with an acid number of 24-27 mg KOH/g | Request Sample |
| VESTOWAX® EH 100 Pellets | Evonik Operations GmbH, BL Coating & Adhesive Resins | 非功能化費-托硬石蠟。 | Request Sample |
| VESTOWAX® FM 1012 | Evonik Operations GmbH, BL Coating & Adhesive Resins | 微粉化費-托/PFTE蠟。 | Request Sample |
| VESTOWAX® H 2050 MG | Evonik Operations GmbH, BL Coating & Adhesive Resins | VESTOWAX® H 2050 MG is a non-functionalised Fischer-Tropsch hard paraffin. | Request Sample |
| VESTOWAX® SH 105 Pellets | Evonik Operations GmbH, BL Coating & Adhesive Resins | 非功能化費-托硬石蠟。 | Request Sample |
| VESTOWAX® SH 105 Powder | Evonik Operations GmbH, BL Coating & Adhesive Resins | 非功能化費-托硬石蠟。 | Request Sample |
| VESTOWAX® SH 112 | Evonik Operations GmbH, BL Coating & Adhesive Resins | 微粉化費-托硬蠟。 | Request Sample |
