| Anti-foam Agent BLK-6618 | BELIKE Chemical Co.,Ltd. | Anti-foam Agent BLK-6618 is a coating additive that is in the form of a white liquid. This product is most commonly used as a defoamer in water-based printing paste, paper coatings, and adhesives. | |
| Cimsil A35 | Tolsa, S.A. | Cimsil A35 is a powdered additive that modifies the rheology of mortar, gypsum plaster, and concrete. It is a thixotropic additive specifically developed to act as an anti-sagging, anti-slipping agent that improves the work ability and visual finish in ...展開 Cimsil A35 is a powdered additive that modifies the rheology of mortar, gypsum plaster, and concrete. It is a thixotropic additive specifically developed to act as an anti-sagging, anti-slipping agent that improves the work ability and visual finish in the systems to which it is incorporated. It can be used in ceramic adhesives, ready mixed adhesives, crack fillers, and pastes. 收起 | |
| Cimsil C22 | Tolsa, S.A. | Cimsil C22 is a water dispersible powdered additive for use in mortars. It is developed to act as a water-retaining agent and a rheological additive. It can be used for projected renders and stuccos, skim coats, and monolayer mortars. | |
| Cimsil CT1 | Tolsa, S.A. | Cimsil CT1 is a water dispersible powdered additive. It is developed to act as a water-retaining agent and as an anti-sliding additive in formulations of tile adhesive mortars. It can be used in mortars and tile adhesives. | |
| Cimsil CT2 | Tolsa, S.A. | Cimsil CT2 is a water dispersible powdered additive. It is developed to act as a water-retaining agent and as an anti-sliding additive in formulations of tile adhesives. It can be used in mortars and tile adhesives. | |
| Cimsil D10 | Tolsa, S.A. | Cimsil D10 is a water dispersible powdered additive. It is designed to act as a water-retaining agent and an anti-sliding additive. It can be used in ceramic adhesives, adhesives, crack fillers, and pastes. | |
| Cimsil G30 | Tolsa, S.A. | Cimsil G30 is an attapulgite based additive developed to modify the rheology of wet and dry joint compounds and adhesives. It is developed to improve sag resistance of the compound before drying or setting. It can be used in wet and dry joint fillers, s...展開 Cimsil G30 is an attapulgite based additive developed to modify the rheology of wet and dry joint compounds and adhesives. It is developed to improve sag resistance of the compound before drying or setting. It can be used in wet and dry joint fillers, spackle compounds, crack fillers, mastics, and sealants. 收起 | |
| Cimsil G50 | Tolsa, S.A. | Cimsil G50 is a thixotropic and shear thinning additive. It is developed as an anti-sagging agent in gypsum systems. It can be used for gypsum spray plasters, gypsum compounds, and gypsum based adhesives. | |
| Eunox AO-1098 | Eutec Chemical Co., Ltd. | Eunox AO-1098 is a white to off-white crystalline powder with a melting point between 156-162℃. This product is an efficient hindered phenolic antioxidant for the stabilization of polyamide molded parts, fibers and films in addition to be recommended for ...展開 Eunox AO-1098 is a white to off-white crystalline powder with a melting point between 156-162℃. This product is an efficient hindered phenolic antioxidant for the stabilization of polyamide molded parts, fibers and films in addition to be recommended for polymers such as adhesives, elastomers and other other organic substrates. 收起 | |
| Eunox AO-1222 | Eutec Chemical Co., Ltd. | Eunox AO-1222 is a white to off-white, free-flowing powder and a phenolic antioxidant that contains phosphorus used as an efficient, non-discoloring stabilizer. This product is used for organic substrates including adhesives for protection against thermo-...展開 Eunox AO-1222 is a white to off-white, free-flowing powder and a phenolic antioxidant that contains phosphorus used as an efficient, non-discoloring stabilizer. This product is used for organic substrates including adhesives for protection against thermo-oxidative degradation. 收起 | |
| Eunox AO-129 | Eutec Chemical Co., Ltd. | Eunox AO-129 is a white crystalline powder and a primary antioxidant for organic polymers during processing–reducing viscosity change and gel formation. This product provides long-term heat stability in products including adhesives. | |
| Eunox AO-136 | Eutec Chemical Co., Ltd. | Eunox AO-136 is a white powder with a melting point between 130-135℃. This product is used as an antioxidant in several polymers including elastomers and adhesives. | |
| Eunox AO-1425 | Eutec Chemical Co., Ltd. | Eunox AO-1425 is an odorless white to off-white powder and a high molecular weight phenolic antioxidant that contains phosphorus. This product is an efficient, non-discoloring stabilizer for organic substrates including adhesives for protection against th...展開 Eunox AO-1425 is an odorless white to off-white powder and a high molecular weight phenolic antioxidant that contains phosphorus. This product is an efficient, non-discoloring stabilizer for organic substrates including adhesives for protection against thermo-oxidative degradation while retaining strong color retention. 收起 | |
| Eunox AO-1425 (HQ) | Eutec Chemical Co., Ltd. | Eunox AO-1425 (HQ) is an odorless white to off-white powder, multifunctional additive and a high molecular weight phenolic antioxidant containing phosphorus. This product is an efficient, non-discoloring stabilizer for organic substrates including adhesiv...展開 Eunox AO-1425 (HQ) is an odorless white to off-white powder, multifunctional additive and a high molecular weight phenolic antioxidant containing phosphorus. This product is an efficient, non-discoloring stabilizer for organic substrates including adhesives. It protects against thermo-oxidative degradation and has strong color retention and compatibility. 收起 | |
| Eunox AO-1726 | Eutec Chemical Co., Ltd. | Eunox AO-1726 is a solid of 4,6-Bis(dodecylthiomethyl)-o-cresol. This product is a thermo-oxidative stabilizer for adhesives, particularly for hot melt solvent and water born adhesives. It can also be applied to copolymers and PUR products such as PU seal...展開 Eunox AO-1726 is a solid of 4,6-Bis(dodecylthiomethyl)-o-cresol. This product is a thermo-oxidative stabilizer for adhesives, particularly for hot melt solvent and water born adhesives. It can also be applied to copolymers and PUR products such as PU sealants. 收起 | |
| Eunox AO-445 | Eutec Chemical Co., Ltd. | Eunox AO-445 is a white crystalline powder and an effective non-discoloring aromatic amine type antioxidant. It can be used as a thermal stabilizer in many applications including hot melt adhesives. | |
| Eunox AO-445 | Eutec Chemical Co., Ltd. | Eunox AO-445 is a white crystalline powder and a non-toxic, tasteless and light colored antioxidant. This product can be applied to adhesives and provides resistance to heat, light and aging. | |
| Eunox AO-565 | Eutec Chemical Co., Ltd. | Eunox AO-565 is a white to off-white powder is an antioxidant and stabilizer used in hot melt and solvent-based adhesives as well as natural and synthetic tackifier resins. This product only requires low concentrations for effectiveness, is non-staining d...展開 Eunox AO-565 is a white to off-white powder is an antioxidant and stabilizer used in hot melt and solvent-based adhesives as well as natural and synthetic tackifier resins. This product only requires low concentrations for effectiveness, is non-staining due to its low volatility, has a low melting point for easy dispersion and contains durability for processing, drying and storage. 收起 | |
| Eunox AO-616 | Eutec Chemical Co., Ltd. | Eunox AO-616 is a cream to amber colored powder and a non-discoloring, non-staining antioxidant, containing high activity and low volatility. This product can be used in tackifiers, adhesives and sealants | |
| Eunox AO-626 | Eutec Chemical Co., Ltd. | Eunox AO-626 is a white crystalline powder with a minimum melting point of 160℃ and a 1% acid value. This product can be used processing stabilizer for elastomers and adhesives. For best effect, it is used with hindered phenolic antioxidants. | |
| Eusorb UV-5411 | Eutec Chemical Co., Ltd. | Eusorb UV-5411 is a white to off-white crystalline powder with a melting point between 103-107℃ and a 0.1% Ash content. This product provides initial color and relatively low volatility making it an efficient UV-absorber for polyvinyl butyral (molding, sh...展開 Eusorb UV-5411 is a white to off-white crystalline powder with a melting point between 103-107℃ and a 0.1% Ash content. This product provides initial color and relatively low volatility making it an efficient UV-absorber for polyvinyl butyral (molding, sheet, glazing materials for window, lighting, sign, marine, and auto applications), coatings, photo products and sealants. 收起 | |
| Eusorb UV-571 | Eutec Chemical Co., Ltd. | Eusorb UV-571 is yellow and clear liquid used as an efficient UV-absorber that can be applied to coatings and adhesives. It is commonly applied to non-staining formulations for polyamide fibers and spin finished for polyamides, PET, PUR and PP fibers. | |
| Eusorb UV-694 | Eutec Chemical Co., Ltd. | Eusorb UV-694 is a light yellow to off-white powder used as an efficient, colorless UV absorber for various polymers including coatings and adhesives. This product contains strong absorptivity in the sensitive UV region while retaining minimal physical lo...展開 Eusorb UV-694 is a light yellow to off-white powder used as an efficient, colorless UV absorber for various polymers including coatings and adhesives. This product contains strong absorptivity in the sensitive UV region while retaining minimal physical losses and compatibility. 收起 | |
| Eusorb UV-9 (BP-3) | Eutec Chemical Co., Ltd. | Eusorb UV-9 (BP-3) is a pale yellow crystalline powder with a minimum melting point of 62℃. This product is used as a UV-absorber in a variety of products including adhesives. | |
| Eusorb UV-P | Eutec Chemical Co., Ltd. | Eusorb UV-P is a pale yellow crystalline powder with a melting point between 128-132℃. This product is an efficient UV-absorber for styrenic polymers, PVC, unsaturated polyesters, PU, acrylic polymers, polycarbonates, adhesives and coatings. | |
| Eustab HS-700 | Eutec Chemical Co., Ltd. | Eustab HS-700 is a white to off-white crystalline powder and an efficient anti-hydrolysis agent for many polymers. This product is used to protect against wear due to hydrolysis and to prevent reduction of molecular weight. It can be applied to PU system...展開 Eustab HS-700 is a white to off-white crystalline powder and an efficient anti-hydrolysis agent for many polymers. This product is used to protect against wear due to hydrolysis and to prevent reduction of molecular weight. It can be applied to PU system adhesives. 收起 | |
| Eustab LS-292 | Eutec Chemical Co., Ltd. | Eustab LS-292 is a clear solution slightly yellow viscous liquid and an efficient liquid hindered amine light stabilizer for use in several applications including adhesives, sealants and coatings. This product is commonly used for polyurethanes due to its...展開 Eustab LS-292 is a clear solution slightly yellow viscous liquid and an efficient liquid hindered amine light stabilizer for use in several applications including adhesives, sealants and coatings. This product is commonly used for polyurethanes due to its solubility in polyols and demonstrates reduced interaction with co-additives such as pigments and other stabilizers. 收起 | |
| Eustab LS-3853 | Eutec Chemical Co., Ltd. | Eustab LS-3853 is a waxy solid and an efficient liquid hindered amine light stabilizer. It is for use in polypropylene, polyethylene, styrenics, unsaturated polyesters, acrylics, vinyl polymers including adhesives, sealants and coatings. | |
| Fillite Standard Grades | Tolsa, S.A. | Fillite Standard Grades consists of glass hard, inert, hollow silicate spheres. It is designed to reduce the weight of plastics, rubbers, resins, and cement. It can be used in PVC flooring, brake linings, phenolics and epoxies, cast polyesters, wallboar...展開 Fillite Standard Grades consists of glass hard, inert, hollow silicate spheres. It is designed to reduce the weight of plastics, rubbers, resins, and cement. It can be used in PVC flooring, brake linings, phenolics and epoxies, cast polyesters, wallboard joint compounds, oil well cement, and tile adhesives. 收起 | |
| Fillite White / High-Alumina Grades | Tolsa, S.A. | Fillite White / High Alumina Grades consists of glass hard, inert, hollow silicate spheres. It is designed to reduce the weights fo plastics, rubbers, resins, and cement. It can be used for gypsum board jointing compounds, veneering plasters, stuccos, s...展開 Fillite White / High Alumina Grades consists of glass hard, inert, hollow silicate spheres. It is designed to reduce the weights fo plastics, rubbers, resins, and cement. It can be used for gypsum board jointing compounds, veneering plasters, stuccos, sealants, coatings, cast resins, refractories, foundry applications, or high temperatures resistant coatings. 收起 | |
| Microsil 100 | Tolsa, S.A. | Microsil 100 consists of inert microspheres obtained by thermal treatment at high temperatures, which creates a hard glass crust around a hollow space filled by air. It is designed to be used in applications where particle size is not a limiting factor....展開 Microsil 100 consists of inert microspheres obtained by thermal treatment at high temperatures, which creates a hard glass crust around a hollow space filled by air. It is designed to be used in applications where particle size is not a limiting factor. It can be used as joint filler for drywall and gypsum boards, cement boards, mortars and stuccos, bitumen membranes for waterproofing, asphalt emulsions, resin based waterproofing coatings, textural paint, putties and mastics, and tile adhesives. 收起 | |
| Microsil 100S | Tolsa, S.A. | Microsil 100S consists of coated inert microspheres obtained by thermal treatment at high temperatures, which creates a hard glass crust around a hollow space filled by air. It is designed to be used in applications where particle size is not a limiting...展開 Microsil 100S consists of coated inert microspheres obtained by thermal treatment at high temperatures, which creates a hard glass crust around a hollow space filled by air. It is designed to be used in applications where particle size is not a limiting factor that also require a lower viscosity or smaller absorption. It can be used as joint filler for drywall and gypsum boards, cement boards, mortars and stuccos, bitumen membranes for waterproofing, asphalt emulsions, resin based waterproofing coatings, textural paint, putties and mastics, and tile adhesives. 收起 | |
| Microsil 200 | Tolsa, S.A. | Microsil 200 consists of inert microspheres obtained by thermal treatment at high temperatures, which creates a hard glass crust around a hollow space filled by air. It is designed to be used in applications where particle size is not a limiting factor. ...展開 Microsil 200 consists of inert microspheres obtained by thermal treatment at high temperatures, which creates a hard glass crust around a hollow space filled by air. It is designed to be used in applications where particle size is not a limiting factor. It can be used as joint filler for drywall and gypsum boards, cement boards, mortars and stuccos, bitumen membranes for waterproofing, asphalt emulsions, resin based waterproofing coatings, putties and mastics, and tile adhesives. 收起 | |
| Microsil 200S | Tolsa, S.A. | Microsil 200S consists of coated inert microspheres obtained by thermal treatment at high temperatures, which creates a hard glass crust around a hollow space filled by air. It is designed to be used in applications where particle size is not a limiting f...展開 Microsil 200S consists of coated inert microspheres obtained by thermal treatment at high temperatures, which creates a hard glass crust around a hollow space filled by air. It is designed to be used in applications where particle size is not a limiting factor that also require a lower viscosity or smaller absorption. It can be used as joint filler for drywall and gypsum boards, cement boards, mortars and stuccos, bitumen membranes for waterproofing, asphalt emulsions, resin based waterproofing coatings, putties and mastics, and tile adhesives. 收起 | |
| Milecell 60 HPMC | MPI Chemie B.V. | Milecell 60 HPMC is hydroxy propyl methyl cellulose in the form of a white to slightly off-white fibrous or granular powder. It is used as a cellulose ether additive in paint, adhesive, and printing industries. Milecell 60 HPMC acts as a thickener, water ...展開 Milecell 60 HPMC is hydroxy propyl methyl cellulose in the form of a white to slightly off-white fibrous or granular powder. It is used as a cellulose ether additive in paint, adhesive, and printing industries. Milecell 60 HPMC acts as a thickener, water retention agent, suspension aid, and colloid protector in applications such as dispersion paints, inks, table coatings, wallpaper paste, and tile adhesives. 收起 | |
| Milecell 65 HPMC | MPI Chemie B.V. | Milecell 65 HPMC is hydroxy propyl methyl cellulose in the form of a white to slightly off-white fibrous or granular powder. It is used as a cellulose ether additive in paint, adhesive, and printing industries. Milecell 65 HPMC acts as a thickener, water ...展開 Milecell 65 HPMC is hydroxy propyl methyl cellulose in the form of a white to slightly off-white fibrous or granular powder. It is used as a cellulose ether additive in paint, adhesive, and printing industries. Milecell 65 HPMC acts as a thickener, water retention agent, suspension aid, and colloid protector in applications such as dispersion paints, inks, table coatings, wallpaper paste, and tile adhesives. 收起 | |
| Milecell 75 HPMC | MPI Chemie B.V. | Milecell 75 HPMC is hydroxy propyl methyl cellulose in the form of a white to slightly off-white fibrous or granular powder. It is used as a cellulose ether additive in paint, adhesive, and printing industries. Milecell 75 HPMC acts as a thickener, water ...展開 Milecell 75 HPMC is hydroxy propyl methyl cellulose in the form of a white to slightly off-white fibrous or granular powder. It is used as a cellulose ether additive in paint, adhesive, and printing industries. Milecell 75 HPMC acts as a thickener, water retention agent, suspension aid, and colloid protector in applications such as dispersion paints, inks, table coatings, wallpaper paste, and tile adhesives. 收起 | |
| Milecell EC Standard | MPI Chemie B.V. | Milecell EC Standard is ethyl cellulose in the form of a white powder or granules. It is used as a cellulose ether additive in paint, adhesive, and printing industries. Milecell EC Standard acts as a thickener, water retention agent, suspension aid, and c...展開 Milecell EC Standard is ethyl cellulose in the form of a white powder or granules. It is used as a cellulose ether additive in paint, adhesive, and printing industries. Milecell EC Standard acts as a thickener, water retention agent, suspension aid, and colloid protector in applications such as dispersion paints, inks, table coatings, wallpaper paste, and tile adhesives. 收起 | |
| Pangel AD | Tolsa, S.A. | Pangel AD is a rheological additive that is manufactured from high purity sepiolite. It controls system flow and consistency for components such as solvents and fillers. It can be used in water-based paints, foundry coatings, friction elements, gaskets,...展開 Pangel AD is a rheological additive that is manufactured from high purity sepiolite. It controls system flow and consistency for components such as solvents and fillers. It can be used in water-based paints, foundry coatings, friction elements, gaskets, epoxy adhesives, sealants, and mastics. 收起 | |
| Pangel B10 | Tolsa, S.A. | Pangel B10 is a powdered additive with high thickening and anti-settling capacity for medium-low polarity systems. It offers thixotropic, suspension, and sagging resistance properties based on White Spirit type solvents. It can be used in paints, coatin...展開 Pangel B10 is a powdered additive with high thickening and anti-settling capacity for medium-low polarity systems. It offers thixotropic, suspension, and sagging resistance properties based on White Spirit type solvents. It can be used in paints, coatings, printing inks, drilling mud, greases, sealants and joints, asphalt coatings, putties, rubber, gel-coat, and emulsions. 收起 | |
| Pangel B20 | Tolsa, S.A. | Pangel B20 is a powdered additive with high thickening and anti-setting capacity for intermediate polarity systems. It provides thixotropic, suspension, and sagging resistance properties to systems based on aromatic and unsaturated polyester type solvent...展開 Pangel B20 is a powdered additive with high thickening and anti-setting capacity for intermediate polarity systems. It provides thixotropic, suspension, and sagging resistance properties to systems based on aromatic and unsaturated polyester type solvents. It can be used in paints, coatings, printing inks, unsaturated polyester putties, paint strippers, greases, asphalt coatings, sealants and joints, plastisol and rubber, emulsions, gel-coats, and nail varnish,. 收起 | |
| Pangel B40 | Tolsa, S.A. | Pangel B40 is a powdered additive with high thickening and anti-settling capacity for high polarity systems, particularly those based on alcohol, glycol, or ketone type solvents, or in mixtures of those with water. It is recommended to provide thixotropi...展開 Pangel B40 is a powdered additive with high thickening and anti-settling capacity for high polarity systems, particularly those based on alcohol, glycol, or ketone type solvents, or in mixtures of those with water. It is recommended to provide thixotropic, suspension, and sagging-resistance properties. It can be used in coatings, paints, printing inks, paint strippers, sealants and joints, vinyl plastisol, gel-coat, nail varnish, wash coat alcohols, glycols, and esters. 收起 | |
| Pangel M100 | Tolsa, S.A. | Pangel M100 is a thickening and anti-settling agent made of purified bentonite clay. It is developed to give water-borne formulations with stability, viscosity and adhesion control as well as texturing and surface finishing. It is used for adhesives, em...展開 Pangel M100 is a thickening and anti-settling agent made of purified bentonite clay. It is developed to give water-borne formulations with stability, viscosity and adhesion control as well as texturing and surface finishing. It is used for adhesives, emulsion paints, textural paints, and bituminous emulsion. 收起 | |
| Pangel M150 | Tolsa, S.A. | Pangel M150 is a thickening and anti-setting agent made of purified bentonite clay. It was developed for providing water-borne formulations with stability and viscosity control, sedimentation and sagging control, workability, and water retention. It can...展開 Pangel M150 is a thickening and anti-setting agent made of purified bentonite clay. It was developed for providing water-borne formulations with stability and viscosity control, sedimentation and sagging control, workability, and water retention. It can be used for adhesives, bituminous emulsion, and seed coatings. 收起 | |
| Pangel M280 | Tolsa, S.A. | Pangel M280 is a thickening and anti-setting agent made of purified bentonite clay. It is developed to provide water-borne formulations with stability and viscosity control, adhesion control, texturing and stippling effects, and strong binding properties...展開 Pangel M280 is a thickening and anti-setting agent made of purified bentonite clay. It is developed to provide water-borne formulations with stability and viscosity control, adhesion control, texturing and stippling effects, and strong binding properties. It can be used for adhesives, emulsion paints, bituminous emulsion, textural paints, and granulation and agglomeration. 收起 | |
| Pangel OMD2 | Tolsa, S.A. | Pangel OMD2 is a rheological additive for medium to high polarity systems made from purified bentonite clay. It is recommended for providing solvent-borne systems with properties including thixotropic and pseudoplastic effects, sag control, levelling, an...展開 Pangel OMD2 is a rheological additive for medium to high polarity systems made from purified bentonite clay. It is recommended for providing solvent-borne systems with properties including thixotropic and pseudoplastic effects, sag control, levelling, and pigment settling prevention. It can be used in anti-corrosive paints, adhesives, industrial finishes, maintenance coatings, epoxy based coatings, and paint removers. 收起 | |
| Pangel S9 | Tolsa, S.A. | Pangel S9 is a powdered rheological additive made from sepiolite for use in aqueous systems. It controls the system flow and consistency of components including solvents and fillers. It can be used for asphalt sheets and emulsions, anti-corrosion coatin...展開 Pangel S9 is a powdered rheological additive made from sepiolite for use in aqueous systems. It controls the system flow and consistency of components including solvents and fillers. It can be used for asphalt sheets and emulsions, anti-corrosion coatings, water-based paints, foundry coatings, friction elements, gaskets, epoxy adhesives, sealants and mastics, and additives for cement and gypsum systems. 收起 | |
| Photocure DETX | Eutec Chemical Co., Ltd. | Photocure DETX is a yellow crystalline powder of 2,4-diethylthioxanthone and an efficient photoinitiator with a melting point between 65-75℃. This product is used for printing inks, wood varnishes, decorative coatings for metal cans and food cartons, adhe...展開 Photocure DETX is a yellow crystalline powder of 2,4-diethylthioxanthone and an efficient photoinitiator with a melting point between 65-75℃. This product is used for printing inks, wood varnishes, decorative coatings for metal cans and food cartons, adhesives, pressure transfer sheets and photo resists. 收起 | |
| Photocure ITX-P | Eutec Chemical Co., Ltd. | Photocure ITX-P is a yellow crystalline powder of 2-Isopropylthioxanthone with a melting point between 70-76℃. This product is an efficient photoinitiator for printing inks, wood varnishes, decorative coatings for metal cans and food cartons, adhesives a...展開 Photocure ITX-P is a yellow crystalline powder of 2-Isopropylthioxanthone with a melting point between 70-76℃. This product is an efficient photoinitiator for printing inks, wood varnishes, decorative coatings for metal cans and food cartons, adhesives and pressure transfer sheets. 收起 |
