Amicure® CG-NA Curing Agent | Evonik Operations GmbH, BL Crosslinkers | Amicure® CG-NA Curing Agent is an unpulverized grade of dicyandiamide designed for use as a latent curing agent for epoxy resins in solventbased processes. It is ideal for use in electrical laminates, and solvent-based, pre-preg composites. | Request Sample |
AMICURE® UR Curing Agent | Evonik Operations GmbH, BL Crosslinkers | AMICURE® UR Curing Agent is a substituted urea-based accelerator (1 Phenyl 3,3 dimethyl urea) for dicyandiamide- cured epoxy resins. It combines excellent latency at ambient temperature with rapid cure in systems heated above its activation temperature. I...展開 AMICURE® UR Curing Agent is a substituted urea-based accelerator (1 Phenyl 3,3 dimethyl urea) for dicyandiamide- cured epoxy resins. It combines excellent latency at ambient temperature with rapid cure in systems heated above its activation temperature. It is ideal for use in one-pack paste and film adhesives, heat-sure composites, and prepreg composites. 收起 | Request Sample |
Ancamide® 220 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | Ancamide® 220 Curing Agent is one in a series of standard reactive polyamides for use in the curing of epoxy resins. It has been designed particularly for use in solvent-based surface coatings. | Request Sample |
ANCAMIDE® 220-X-70 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | ANCAMIDE® 220-X-70 Curing Agent is one in a series of standard reactive polyamides intended for use in the curing of epoxy resins. It is ideal for use in solvent-based maintenance coatings, primers, sealers and coatings for concrete. | Request Sample |
ANCAMIDE 221® Curing Agent | Evonik Operations GmbH, BL Crosslinkers | ANCAMIDE 221® Curing Agent is a member of a series of reactive polyamides developed for use in the curing of epoxy resins in solvent-based surface coatings applications. Special features include good color, color stability, chemical resistance and excelle...展開 ANCAMIDE 221® Curing Agent is a member of a series of reactive polyamides developed for use in the curing of epoxy resins in solvent-based surface coatings applications. Special features include good color, color stability, chemical resistance and excellent corrosion resistance properties. It is freely compatible with a wide range of solvents, including those generally used in epoxy resin based coatings. 收起 | Request Sample |
ANCAMIDE® 3201 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | ANCAMIDE® 3201 Curing Agent is a low viscosity, solvent-free formulated polyaminoamide adduct. The curing agent is an accelerated version of Ancamine® 3200 and is recommended for use with liquid epoxy resin for the development of primers, coatings particu...展開 ANCAMIDE® 3201 Curing Agent is a low viscosity, solvent-free formulated polyaminoamide adduct. The curing agent is an accelerated version of Ancamine® 3200 and is recommended for use with liquid epoxy resin for the development of primers, coatings particularly for wet and high humid application areas. In addition the curing agent can be used for high-solid coatings for corrosion protection under severe conditions. 收起 | Request Sample |
ANCAMIDE® 400 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | ANCAMIDE® 400 Curing Agent is a unique, low viscosity reactive polyamide developed specifically for use in the curing of liquid epoxy resins. It can be used in a wide range of applications, including flooring and surface coatings, adhesives, sealant and p...展開 ANCAMIDE® 400 Curing Agent is a unique, low viscosity reactive polyamide developed specifically for use in the curing of liquid epoxy resins. It can be used in a wide range of applications, including flooring and surface coatings, adhesives, sealant and putties, castings, laminates, and cable jointing compounds. 收起 | Request Sample |
Ancamide® 910 | Evonik Operations GmbH, BL Crosslinkers | Ancamide® 910 curing agent is a versatile, flexible hardener designed for use with liquid epoxy resin. Its engineered chemistry provides a unique combination of properties not found in other epoxy hardeners. It delivers outstanding flexibility/peel streng...展開 Ancamide® 910 curing agent is a versatile, flexible hardener designed for use with liquid epoxy resin. Its engineered chemistry provides a unique combination of properties not found in other epoxy hardeners. It delivers outstanding flexibility/peel strength, excellent thermal shock resistance, and good electrical properties. Additional features include lower viscosity than conventional polyamides and DOT non-corrosive status. Ancamide® 910 curing agent can be used either as a sole curing agent or as a modifier. 收起 | Request Sample |
Ancamine® 2014AS/FG | Evonik Operations GmbH, BL Crosslinkers | Ancamine® 2014AS/FG is a modified aliphatic polyamine adduct designed for use as a latent catalyst and curing agent for liquid epoxy resins. They can also be used as accelerators for dicyandiamide (DICY). This white micronised powder is applied in one-com...展開 Ancamine® 2014AS/FG is a modified aliphatic polyamine adduct designed for use as a latent catalyst and curing agent for liquid epoxy resins. They can also be used as accelerators for dicyandiamide (DICY). This white micronised powder is applied in one-component adhesives and solvent free laminating. 收起 | Request Sample |
Ancamine® 2337S | Evonik Operations GmbH, BL Crosslinkers | Ancamine® 2337S curing agent is a modified aliphatic amine designed for use as a latent curing agent for epoxy resins. Applications for this product include one-component conduction or induction heat-cure adhesives, potting, coatings, and hot-melt prepreg...展開 Ancamine® 2337S curing agent is a modified aliphatic amine designed for use as a latent curing agent for epoxy resins. Applications for this product include one-component conduction or induction heat-cure adhesives, potting, coatings, and hot-melt prepregs. This product is a light yellow powder. 收起 | Request Sample |
Ancamine® 2442 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | Ancamine® 2442 curing agent is a modified polyamine designed for use as a latent curing agent for one-component epoxy formulations. The product can also be used to accelerate dicyandiamide (DICY). It provides an excellent balance of low-temp...展開 Ancamine® 2442 curing agent is a modified polyamine designed for use as a latent curing agent for one-component epoxy formulations. The product can also be used to accelerate dicyandiamide (DICY). It provides an excellent balance of low-temperature activation, good shelf stability and high glass transition temperature, and can be used in many applications requiring latency and high performance. 收起 | Request Sample |
ANCAREZ® AR555 Waterborne Epoxy Resin | Evonik Operations GmbH, BL Crosslinkers | ANCAREZ® AR555 Waterborne Epoxy Resin is a waterborne solid epoxy resin dispersion delivered at 55% solids in water. It is designed for use in two-component, ambient-cure epoxy systems. It delivers superior performance at lower cost when compared to con...展開 ANCAREZ® AR555 Waterborne Epoxy Resin is a waterborne solid epoxy resin dispersion delivered at 55% solids in water. It is designed for use in two-component, ambient-cure epoxy systems. It delivers superior performance at lower cost when compared to conventional solid resin dispersions. The unique nature of this product allows film formulation without high levels of coalescing solvent, which enables the formulation of low-odor, zero-VOC systems. 收起 | Request Sample |
Anti-foam Agent BLK-6618 | BELIKE Chemical Co.,Ltd. | Anti-foam Agent BLK-6618 is a coating additive that is in the form of a white liquid. This product is most commonly used as a defoamer in water-based printing paste, paper coatings, and adhesives. | |
Cimsil A35 | Tolsa, S.A. | Cimsil A35 is a powdered additive that modifies the rheology of mortar, gypsum plaster, and concrete. It is a thixotropic additive specifically developed to act as an anti-sagging, anti-slipping agent that improves the work ability and visual finish in ...展開 Cimsil A35 is a powdered additive that modifies the rheology of mortar, gypsum plaster, and concrete. It is a thixotropic additive specifically developed to act as an anti-sagging, anti-slipping agent that improves the work ability and visual finish in the systems to which it is incorporated. It can be used in ceramic adhesives, ready mixed adhesives, crack fillers, and pastes. 收起 | |
Cimsil C22 | Tolsa, S.A. | Cimsil C22 is a water dispersible powdered additive for use in mortars. It is developed to act as a water-retaining agent and a rheological additive. It can be used for projected renders and stuccos, skim coats, and monolayer mortars. | |
Cimsil CT1 | Tolsa, S.A. | Cimsil CT1 is a water dispersible powdered additive. It is developed to act as a water-retaining agent and as an anti-sliding additive in formulations of tile adhesive mortars. It can be used in mortars and tile adhesives. | |
Cimsil CT2 | Tolsa, S.A. | Cimsil CT2 is a water dispersible powdered additive. It is developed to act as a water-retaining agent and as an anti-sliding additive in formulations of tile adhesives. It can be used in mortars and tile adhesives. | |
Cimsil D10 | Tolsa, S.A. | Cimsil D10 is a water dispersible powdered additive. It is designed to act as a water-retaining agent and an anti-sliding additive. It can be used in ceramic adhesives, adhesives, crack fillers, and pastes. | |
Cimsil G30 | Tolsa, S.A. | Cimsil G30 is an attapulgite based additive developed to modify the rheology of wet and dry joint compounds and adhesives. It is developed to improve sag resistance of the compound before drying or setting. It can be used in wet and dry joint fillers, s...展開 Cimsil G30 is an attapulgite based additive developed to modify the rheology of wet and dry joint compounds and adhesives. It is developed to improve sag resistance of the compound before drying or setting. It can be used in wet and dry joint fillers, spackle compounds, crack fillers, mastics, and sealants. 收起 | |
Cimsil G50 | Tolsa, S.A. | Cimsil G50 is a thixotropic and shear thinning additive. It is developed as an anti-sagging agent in gypsum systems. It can be used for gypsum spray plasters, gypsum compounds, and gypsum based adhesives. | |
EPODIL® 742 | Evonik Operations GmbH, BL Crosslinkers | An epoxy resin system modifier. | Request Sample |
EPODIL® 748 REACTIVE DILUENT | Evonik Operations GmbH, BL Crosslinkers | 通用型稀釋劑。低毒性和低蒸氣壓。反應速度慢,具有良好的降粘作用,可增進柔韌性並可改善對非極性表面的附著力 | Request Sample |
EPODIL® 749 REACTIVE DILUENT | Evonik Operations GmbH, BL Crosslinkers | 低揮發性稀釋劑。很小程度地降低物理性能和反應活性。可應用於國內工程、電子灌裝和封裝 | Request Sample |
EPODIL® 759 Reactive Diluent | Evonik Operations GmbH, BL Crosslinkers | EPODIL® 759 Reactive Diluent is an aliphatic glycidyl ether (C12– C13). The product is a monofunctional reactive diluent used to reduce the viscosity of epoxy resin systems. Since monofunctional diluents, in general, cause molecular weight chain terminati...展開 EPODIL® 759 Reactive Diluent is an aliphatic glycidyl ether (C12– C13). The product is a monofunctional reactive diluent used to reduce the viscosity of epoxy resin systems. Since monofunctional diluents, in general, cause molecular weight chain termination, the minimum amount necessary to achieve the desired viscosity reduction should be used. 收起 | Request Sample |
EPODIL® LV5 DILUENT | Evonik Operations GmbH, BL Crosslinkers | Epodil LV5 diluent is a chemically inert, low viscosity liquid hydrocarbon resin. It is soluble in and compatible with a wide variety of epoxy resins as well as most curing agents. | Request Sample |
Fillite Standard Grades | Tolsa, S.A. | Fillite Standard Grades consists of glass hard, inert, hollow silicate spheres. It is designed to reduce the weight of plastics, rubbers, resins, and cement. It can be used in PVC flooring, brake linings, phenolics and epoxies, cast polyesters, wallboar...展開 Fillite Standard Grades consists of glass hard, inert, hollow silicate spheres. It is designed to reduce the weight of plastics, rubbers, resins, and cement. It can be used in PVC flooring, brake linings, phenolics and epoxies, cast polyesters, wallboard joint compounds, oil well cement, and tile adhesives. 收起 | |
Fillite White / High-Alumina Grades | Tolsa, S.A. | Fillite White / High Alumina Grades consists of glass hard, inert, hollow silicate spheres. It is designed to reduce the weights fo plastics, rubbers, resins, and cement. It can be used for gypsum board jointing compounds, veneering plasters, stuccos, s...展開 Fillite White / High Alumina Grades consists of glass hard, inert, hollow silicate spheres. It is designed to reduce the weights fo plastics, rubbers, resins, and cement. It can be used for gypsum board jointing compounds, veneering plasters, stuccos, sealants, coatings, cast resins, refractories, foundry applications, or high temperatures resistant coatings. 收起 | |
HYBRIDUR® 580 Polymer Dispersion | Evonik Operations GmbH, BL Crosslinkers | HYBRIDUR® 580 Polymer Dispersion is an acrylic-urethane hybrid polymer dispersion. Cost-effective alternative to standard polyurethane dispersions. Provides outstanding adhesion to a wide variety of substrates, superior abrasion, and chemical and stain re...展開 HYBRIDUR® 580 Polymer Dispersion is an acrylic-urethane hybrid polymer dispersion. Cost-effective alternative to standard polyurethane dispersions. Provides outstanding adhesion to a wide variety of substrates, superior abrasion, and chemical and stain resistance. 收起 | Request Sample |
IMICURE® AMI-1 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | IMICURE® AMI-1 Curing Agent is a liquid, elevated-temperature curing agent for epoxy resins. It is readily compatible with both liquid and solid epoxy resins, and because it is a catalytic curing agent, it is used at low loadings of 1−5 phr. It is ideal f...展開 IMICURE® AMI-1 Curing Agent is a liquid, elevated-temperature curing agent for epoxy resins. It is readily compatible with both liquid and solid epoxy resins, and because it is a catalytic curing agent, it is used at low loadings of 1−5 phr. It is ideal for use in adhesives, pre-preg composites, and encapsulation. 收起 | Request Sample |
IMICURE® AMI-2T Curing Agent | Evonik Operations GmbH, BL Crosslinkers | IMICURE® AMI-2T Curing Agent is an elevated temperature curing agent for epoxy systems. It is readily compatible with both liquid and solid epoxy resins, and because it is a catalytic curing agent, it is used at low loadings of 1−5 phr. It is a good accel...展開 IMICURE® AMI-2T Curing Agent is an elevated temperature curing agent for epoxy systems. It is readily compatible with both liquid and solid epoxy resins, and because it is a catalytic curing agent, it is used at low loadings of 1−5 phr. It is a good accelerator for dicyandiamide, anhydride and phenolic curing agents. It is ideal for use in electrical laminates, adhesives, pre-preg composites, and encapsulation. 收起 | Request Sample |
IMICURE® EMI-24 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | 高反應活性、中等粘度液體咪唑,單獨使用或用於催化雙氰胺或酸酐固化。可應用於燈絲電源繞組、電子層合材料、模塑粉末、單組分膠粘劑和結構膠 | Request Sample |
IMICURE® Imidazole Curing Agent | Evonik Operations GmbH, BL Crosslinkers | IMICURE® Imidazole Curing Agent is an elevated-temperature curing agent for epoxy resins. It is readily compatible with both liquid and solid epoxy resins, and because it is a catalytic curing agent, it is used at low loadings of 1−5 phr. It is a good acc...展開 IMICURE® Imidazole Curing Agent is an elevated-temperature curing agent for epoxy resins. It is readily compatible with both liquid and solid epoxy resins, and because it is a catalytic curing agent, it is used at low loadings of 1−5 phr. It is a good accelerator for dicyandiamide, anhydride and phenolic curing agents. 收起 | Request Sample |
Microsil 100 | Tolsa, S.A. | Microsil 100 consists of inert microspheres obtained by thermal treatment at high temperatures, which creates a hard glass crust around a hollow space filled by air. It is designed to be used in applications where particle size is not a limiting factor....展開 Microsil 100 consists of inert microspheres obtained by thermal treatment at high temperatures, which creates a hard glass crust around a hollow space filled by air. It is designed to be used in applications where particle size is not a limiting factor. It can be used as joint filler for drywall and gypsum boards, cement boards, mortars and stuccos, bitumen membranes for waterproofing, asphalt emulsions, resin based waterproofing coatings, textural paint, putties and mastics, and tile adhesives. 收起 | |
Microsil 100S | Tolsa, S.A. | Microsil 100S consists of coated inert microspheres obtained by thermal treatment at high temperatures, which creates a hard glass crust around a hollow space filled by air. It is designed to be used in applications where particle size is not a limiting...展開 Microsil 100S consists of coated inert microspheres obtained by thermal treatment at high temperatures, which creates a hard glass crust around a hollow space filled by air. It is designed to be used in applications where particle size is not a limiting factor that also require a lower viscosity or smaller absorption. It can be used as joint filler for drywall and gypsum boards, cement boards, mortars and stuccos, bitumen membranes for waterproofing, asphalt emulsions, resin based waterproofing coatings, textural paint, putties and mastics, and tile adhesives. 收起 | |
Microsil 200 | Tolsa, S.A. | Microsil 200 consists of inert microspheres obtained by thermal treatment at high temperatures, which creates a hard glass crust around a hollow space filled by air. It is designed to be used in applications where particle size is not a limiting factor. ...展開 Microsil 200 consists of inert microspheres obtained by thermal treatment at high temperatures, which creates a hard glass crust around a hollow space filled by air. It is designed to be used in applications where particle size is not a limiting factor. It can be used as joint filler for drywall and gypsum boards, cement boards, mortars and stuccos, bitumen membranes for waterproofing, asphalt emulsions, resin based waterproofing coatings, putties and mastics, and tile adhesives. 收起 | |
Microsil 200S | Tolsa, S.A. | Microsil 200S consists of coated inert microspheres obtained by thermal treatment at high temperatures, which creates a hard glass crust around a hollow space filled by air. It is designed to be used in applications where particle size is not a limiting f...展開 Microsil 200S consists of coated inert microspheres obtained by thermal treatment at high temperatures, which creates a hard glass crust around a hollow space filled by air. It is designed to be used in applications where particle size is not a limiting factor that also require a lower viscosity or smaller absorption. It can be used as joint filler for drywall and gypsum boards, cement boards, mortars and stuccos, bitumen membranes for waterproofing, asphalt emulsions, resin based waterproofing coatings, putties and mastics, and tile adhesives. 收起 | |
Milecell 60 HPMC | MPI Chemie B.V. | Milecell 60 HPMC is hydroxy propyl methyl cellulose in the form of a white to slightly off-white fibrous or granular powder. It is used as a cellulose ether additive in paint, adhesive, and printing industries. Milecell 60 HPMC acts as a thickener, water ...展開 Milecell 60 HPMC is hydroxy propyl methyl cellulose in the form of a white to slightly off-white fibrous or granular powder. It is used as a cellulose ether additive in paint, adhesive, and printing industries. Milecell 60 HPMC acts as a thickener, water retention agent, suspension aid, and colloid protector in applications such as dispersion paints, inks, table coatings, wallpaper paste, and tile adhesives. 收起 | |
Milecell 65 HPMC | MPI Chemie B.V. | Milecell 65 HPMC is hydroxy propyl methyl cellulose in the form of a white to slightly off-white fibrous or granular powder. It is used as a cellulose ether additive in paint, adhesive, and printing industries. Milecell 65 HPMC acts as a thickener, water ...展開 Milecell 65 HPMC is hydroxy propyl methyl cellulose in the form of a white to slightly off-white fibrous or granular powder. It is used as a cellulose ether additive in paint, adhesive, and printing industries. Milecell 65 HPMC acts as a thickener, water retention agent, suspension aid, and colloid protector in applications such as dispersion paints, inks, table coatings, wallpaper paste, and tile adhesives. 收起 | |
Milecell 75 HPMC | MPI Chemie B.V. | Milecell 75 HPMC is hydroxy propyl methyl cellulose in the form of a white to slightly off-white fibrous or granular powder. It is used as a cellulose ether additive in paint, adhesive, and printing industries. Milecell 75 HPMC acts as a thickener, water ...展開 Milecell 75 HPMC is hydroxy propyl methyl cellulose in the form of a white to slightly off-white fibrous or granular powder. It is used as a cellulose ether additive in paint, adhesive, and printing industries. Milecell 75 HPMC acts as a thickener, water retention agent, suspension aid, and colloid protector in applications such as dispersion paints, inks, table coatings, wallpaper paste, and tile adhesives. 收起 | |
Milecell EC Standard | MPI Chemie B.V. | Milecell EC Standard is ethyl cellulose in the form of a white powder or granules. It is used as a cellulose ether additive in paint, adhesive, and printing industries. Milecell EC Standard acts as a thickener, water retention agent, suspension aid, and c...展開 Milecell EC Standard is ethyl cellulose in the form of a white powder or granules. It is used as a cellulose ether additive in paint, adhesive, and printing industries. Milecell EC Standard acts as a thickener, water retention agent, suspension aid, and colloid protector in applications such as dispersion paints, inks, table coatings, wallpaper paste, and tile adhesives. 收起 | |
NOURYBOND® 289 Adhesion Promoter | Evonik Operations GmbH, BL Crosslinkers | 封閉型異氰酸酯PVC塑料溶膠附著力促進劑,適用於汽車密封劑,應用於可見區域和抗裂底漆 | Request Sample |
Pangel AD | Tolsa, S.A. | Pangel AD is a rheological additive that is manufactured from high purity sepiolite. It controls system flow and consistency for components such as solvents and fillers. It can be used in water-based paints, foundry coatings, friction elements, gaskets,...展開 Pangel AD is a rheological additive that is manufactured from high purity sepiolite. It controls system flow and consistency for components such as solvents and fillers. It can be used in water-based paints, foundry coatings, friction elements, gaskets, epoxy adhesives, sealants, and mastics. 收起 | |
Pangel B10 | Tolsa, S.A. | Pangel B10 is a powdered additive with high thickening and anti-settling capacity for medium-low polarity systems. It offers thixotropic, suspension, and sagging resistance properties based on White Spirit type solvents. It can be used in paints, coatin...展開 Pangel B10 is a powdered additive with high thickening and anti-settling capacity for medium-low polarity systems. It offers thixotropic, suspension, and sagging resistance properties based on White Spirit type solvents. It can be used in paints, coatings, printing inks, drilling mud, greases, sealants and joints, asphalt coatings, putties, rubber, gel-coat, and emulsions. 收起 | |
Pangel B20 | Tolsa, S.A. | Pangel B20 is a powdered additive with high thickening and anti-setting capacity for intermediate polarity systems. It provides thixotropic, suspension, and sagging resistance properties to systems based on aromatic and unsaturated polyester type solvent...展開 Pangel B20 is a powdered additive with high thickening and anti-setting capacity for intermediate polarity systems. It provides thixotropic, suspension, and sagging resistance properties to systems based on aromatic and unsaturated polyester type solvents. It can be used in paints, coatings, printing inks, unsaturated polyester putties, paint strippers, greases, asphalt coatings, sealants and joints, plastisol and rubber, emulsions, gel-coats, and nail varnish,. 收起 | |
Pangel B40 | Tolsa, S.A. | Pangel B40 is a powdered additive with high thickening and anti-settling capacity for high polarity systems, particularly those based on alcohol, glycol, or ketone type solvents, or in mixtures of those with water. It is recommended to provide thixotropi...展開 Pangel B40 is a powdered additive with high thickening and anti-settling capacity for high polarity systems, particularly those based on alcohol, glycol, or ketone type solvents, or in mixtures of those with water. It is recommended to provide thixotropic, suspension, and sagging-resistance properties. It can be used in coatings, paints, printing inks, paint strippers, sealants and joints, vinyl plastisol, gel-coat, nail varnish, wash coat alcohols, glycols, and esters. 收起 | |
Pangel M100 | Tolsa, S.A. | Pangel M100 is a thickening and anti-settling agent made of purified bentonite clay. It is developed to give water-borne formulations with stability, viscosity and adhesion control as well as texturing and surface finishing. It is used for adhesives, em...展開 Pangel M100 is a thickening and anti-settling agent made of purified bentonite clay. It is developed to give water-borne formulations with stability, viscosity and adhesion control as well as texturing and surface finishing. It is used for adhesives, emulsion paints, textural paints, and bituminous emulsion. 收起 | |
Pangel M150 | Tolsa, S.A. | Pangel M150 is a thickening and anti-setting agent made of purified bentonite clay. It was developed for providing water-borne formulations with stability and viscosity control, sedimentation and sagging control, workability, and water retention. It can...展開 Pangel M150 is a thickening and anti-setting agent made of purified bentonite clay. It was developed for providing water-borne formulations with stability and viscosity control, sedimentation and sagging control, workability, and water retention. It can be used for adhesives, bituminous emulsion, and seed coatings. 收起 | |
Pangel M280 | Tolsa, S.A. | Pangel M280 is a thickening and anti-setting agent made of purified bentonite clay. It is developed to provide water-borne formulations with stability and viscosity control, adhesion control, texturing and stippling effects, and strong binding properties...展開 Pangel M280 is a thickening and anti-setting agent made of purified bentonite clay. It is developed to provide water-borne formulations with stability and viscosity control, adhesion control, texturing and stippling effects, and strong binding properties. It can be used for adhesives, emulsion paints, bituminous emulsion, textural paints, and granulation and agglomeration. 收起 | |
Pangel OMD2 | Tolsa, S.A. | Pangel OMD2 is a rheological additive for medium to high polarity systems made from purified bentonite clay. It is recommended for providing solvent-borne systems with properties including thixotropic and pseudoplastic effects, sag control, levelling, an...展開 Pangel OMD2 is a rheological additive for medium to high polarity systems made from purified bentonite clay. It is recommended for providing solvent-borne systems with properties including thixotropic and pseudoplastic effects, sag control, levelling, and pigment settling prevention. It can be used in anti-corrosive paints, adhesives, industrial finishes, maintenance coatings, epoxy based coatings, and paint removers. 收起 | |
Pangel S9 | Tolsa, S.A. | Pangel S9 is a powdered rheological additive made from sepiolite for use in aqueous systems. It controls the system flow and consistency of components including solvents and fillers. It can be used for asphalt sheets and emulsions, anti-corrosion coatin...展開 Pangel S9 is a powdered rheological additive made from sepiolite for use in aqueous systems. It controls the system flow and consistency of components including solvents and fillers. It can be used for asphalt sheets and emulsions, anti-corrosion coatings, water-based paints, foundry coatings, friction elements, gaskets, epoxy adhesives, sealants and mastics, and additives for cement and gypsum systems. 收起 | |
VESTALITE® S 101 | Evonik Operations GmbH, BL Crosslinkers | VESTALITE® S 101 is a curing agent for epoxy resin matrix designed for SMC applications. Systems using VESTALITE® S 101 have a low initial viscosity during compounding, allowing excellent fiber wetting, highfiber volume fraction and efficient process...展開 VESTALITE® S 101 is a curing agent for epoxy resin matrix designed for SMC applications. Systems using VESTALITE® S 101 have a low initial viscosity during compounding, allowing excellent fiber wetting, highfiber volume fraction and efficient processing. The high reactivity of the hardener allows fast curing inabout 4 - 5 min at 150 °. 收起 | Request Sample |
VESTALITE® S 102 | Evonik Operations GmbH, BL Crosslinkers | VESTALITE® S 102 is a curing agent for epoxy resin matrix designed for SMC applications. Systems using VESTALITE® S 102 have a low initial viscosity during compounding, allowing excellent fiber wetting, high fiber volume fraction and efficient processing....展開 VESTALITE® S 102 is a curing agent for epoxy resin matrix designed for SMC applications. Systems using VESTALITE® S 102 have a low initial viscosity during compounding, allowing excellent fiber wetting, high fiber volume fraction and efficient processing. The high reactivity of the hardener allows fast curing in about3 min at 150 °C. 收起 | Request Sample |
VESTANAT® EP-EF 201 | Evonik Operations GmbH, BL Crosslinkers | VESTANAT® EP-EF 201 is a ready catalyzed polyethoxysilane. It is used as a crosslinker or sole binder to formulate highly scratch- and chemical resistant coatings, e. g. highly scratch resistant NISO*2coatings. The crosslinker is appropriate f...展開 VESTANAT® EP-EF 201 is a ready catalyzed polyethoxysilane. It is used as a crosslinker or sole binder to formulate highly scratch- and chemical resistant coatings, e. g. highly scratch resistant NISO*2coatings. The crosslinker is appropriate for the use in "do-it-yourself" (DIY) applications. 收起 | Request Sample |
VESTANAT® EP-IPMS | Evonik Operations GmbH, BL Crosslinkers | VESTANAT® EP-IPMS is an isocyanate building block for the preparation of silane modified urethane resins. These resins may be used for the production of isocyanate-free, moisture curing adhesives, sealants and weatherable, UV- and ...展開 VESTANAT® EP-IPMS is an isocyanate building block for the preparation of silane modified urethane resins. These resins may be used for the production of isocyanate-free, moisture curing adhesives, sealants and weatherable, UV- and scratch-resistant coatings. 收起 | Request Sample |
VESTANAT® EP-M 222 X | Evonik Operations GmbH, BL Crosslinkers | VESTANAT® EP-M 222 X is a methoxysilane functional urethane crosslinker that can be used as a crosslinker to increase the flexibility of highly scratch resistant coatings, e.g. highly scratch resistant NISO*2 coatings. It is dissolved at 85 % ...展開 VESTANAT® EP-M 222 X is a methoxysilane functional urethane crosslinker that can be used as a crosslinker to increase the flexibility of highly scratch resistant coatings, e.g. highly scratch resistant NISO*2 coatings. It is dissolved at 85 % in xylene, allowing it to be used in low-VOC coatings formulation. 收起 | Request Sample |
VESTANAT® EP-M 60 | Evonik Operations GmbH, BL Crosslinkers | VESTANAT® EP-M 60 is a solvent free, polyfunctional methoxy silane. It is used as a crosslinker toformulate highly scratch resistant coatings. | Request Sample |
VESTANAT® EP-MF 203 | Evonik Operations GmbH, BL Crosslinkers | VESTANAT® EP-MF 203 is a solvent free and ready catalyzed polymethoxysilane. It is used as a crosslinker or sole binder to formulate highly scratch- and chemical resistant coating, e. g. highly scratch resistant NISO*2coatings. | Request Sample |
VESTANAT® EP-MF 204 | Evonik Operations GmbH, BL Crosslinkers | VESTANAT® EP-MF 204 is a solvent free and ready catalyzed polymethoxysilane. It is used as a crosslinker or sole binder to formulate highly scratch- and chemical resistant coating, e. g. highly scratch resistant NISO*2 coatings. | Request Sample |
VESTANAT® EP-MF 205 | Evonik Operations GmbH, BL Crosslinkers | VESTANAT® EP-MF 205 is a solvent-based, ready catalyzed polymethoxysilane. It is used as a crosslinker or sole binder to formulate extremely flexible, highly scratch- and chemical resistant coatings., e.g. highly scratch resistant NISO*2coatings. VESTA...展開 VESTANAT® EP-MF 205 is a solvent-based, ready catalyzed polymethoxysilane. It is used as a crosslinker or sole binder to formulate extremely flexible, highly scratch- and chemical resistant coatings., e.g. highly scratch resistant NISO*2coatings. VESTANAT® EP-MF 205 is particularly characterized by an optimized price/performance ratio and a harmoniously tuned mechanical property profile. 收起 | Request Sample |