| Ceridust® 3910 | Clariant Plastics & Coatings Ltd. | Ceridust® 3910 is a micronized amide wax. | |
| Ceridust® 6050 M | Clariant Plastics & Coatings Ltd. | Ceridust® 6050 M is a micronized metallocene-based polypropylene wax. | |
| Exolit® OP 935 | Clariant Plastics & Coatings Ltd. | Exolit® OP 935 is a white, fine-grained powder based on an organic phosphinate. The product is not hygroscopic and it is insoluble in water and common organic solvents like acetone, dichloromethane, MEK, toluene. Exolit® OP 935 can easily be dispersed in ...展開 Exolit® OP 935 is a white, fine-grained powder based on an organic phosphinate. The product is not hygroscopic and it is insoluble in water and common organic solvents like acetone, dichloromethane, MEK, toluene. Exolit® OP 935 can easily be dispersed in solvents like acetone or MEK. 收起 | |
| Exolit® OP 945 (TP) | Clariant Plastics & Coatings Ltd. | Exolit® OP 945 (TP) is a white, fine-grained powder based on an organic phosphinate with a D95 of less than 5 µm. The product is not hygroscopic and it is insoluble in water and common organic solvents like acetone, dichloromethane, MEK, toluene. Exolit® ...展開 Exolit® OP 945 (TP) is a white, fine-grained powder based on an organic phosphinate with a D95 of less than 5 µm. The product is not hygroscopic and it is insoluble in water and common organic solvents like acetone, dichloromethane, MEK, toluene. Exolit® OP 945 (TP) can easily be dispersed in solvents like acetone or MEK. 收起 | |
| G-Modified Petroleum Resin (C5/C9) (G-100) | Shanghai Qilong Chemical Co., Ltd. | G-Modified Petroleum Resin (C5/C9) (G-100) is pale yellow granular solids and an aliphatic modified aromatic resin obtained from the co-polymerizing of C5 and C9 fraction that derived from the by-product thermal cracking of naphtha. This product is often ...展開 G-Modified Petroleum Resin (C5/C9) (G-100) is pale yellow granular solids and an aliphatic modified aromatic resin obtained from the co-polymerizing of C5 and C9 fraction that derived from the by-product thermal cracking of naphtha. This product is often used as an ink additive or binder for hot melt road marking paint and tackifier for hot melt adhesives. 收起 | |
| G-Modified Petroleum Resin (C5/C9) (G-110) | Shanghai Qilong Chemical Co., Ltd. | G-Modified Petroleum Resin (C5/C9) (G-110) is pale yellow granular solids and an aliphatic modified aromatic resin obtained from the co-polymerizing of C5 and C9 fraction that derived from the by-product thermal cracking of naphtha. This product is often ...展開 G-Modified Petroleum Resin (C5/C9) (G-110) is pale yellow granular solids and an aliphatic modified aromatic resin obtained from the co-polymerizing of C5 and C9 fraction that derived from the by-product thermal cracking of naphtha. This product is often used as an ink additive or binder for hot melt road marking paint and tackifier for hot melt adhesives. 收起 | |
| L-Modified Petroleum Resin (C9) (L-110) | Shanghai Qilong Chemical Co., Ltd. | L-Modified Petroleum Resin (C9) (L-110) is a light yellow transparent granular solid and low molecular weight thermoplastic aromatic resin produced from petroleum derived C9 fraction through a catalytic-polymerization technique. This product is used in ma...展開 L-Modified Petroleum Resin (C9) (L-110) is a light yellow transparent granular solid and low molecular weight thermoplastic aromatic resin produced from petroleum derived C9 fraction through a catalytic-polymerization technique. This product is used in marine paints and alkyd coatings to increase glossiness, adhesive power, hardness and resistance to acid and alkali. It can also increase bonding strength in adhesives and widen and brighten color in printing inks. 收起 | |
| L-Modified Petroleum Resin (C9) (L-120) | Shanghai Qilong Chemical Co., Ltd. | L-Modified Petroleum Resin (C9) (L-120) is a light yellow transparent granular solid and low molecular weight thermoplastic aromatic resin produced from petroleum derived C9 fraction through a catalytic-polymerization technique. This product is used in ma...展開 L-Modified Petroleum Resin (C9) (L-120) is a light yellow transparent granular solid and low molecular weight thermoplastic aromatic resin produced from petroleum derived C9 fraction through a catalytic-polymerization technique. This product is used in marine paints and alkyd coatings to increase glossiness, adhesive power, hardness and resistance to acid and alkali. It can also increase bonding strength in adhesives and widen and brighten color in printing inks. 收起 | |
| L-Modified Petroleum Resin (C9) (L-130) | Shanghai Qilong Chemical Co., Ltd. | L-Modified Petroleum Resin (C9) (L-130) is a light yellow transparent granular solid and low molecular weight thermoplastic aromatic resin produced from petroleum derived C9 fraction through a catalytic-polymerization technique. This product is used in ma...展開 L-Modified Petroleum Resin (C9) (L-130) is a light yellow transparent granular solid and low molecular weight thermoplastic aromatic resin produced from petroleum derived C9 fraction through a catalytic-polymerization technique. This product is used in marine paints and alkyd coatings to increase glossiness, adhesive power, hardness and resistance to acid and alkali. It can also increase bonding strength in adhesives and widen and brighten color in printing inks. 收起 | |
| L-Modified Petroleum Resin (C9) (L-140) | Shanghai Qilong Chemical Co., Ltd. | L-Modified Petroleum Resin (C9) (L-140) is a light yellow transparent granular solid and low molecular weight thermoplastic aromatic resin produced from petroleum derived C9 fraction through a catalytic-polymerization technique. This product is used in ma...展開 L-Modified Petroleum Resin (C9) (L-140) is a light yellow transparent granular solid and low molecular weight thermoplastic aromatic resin produced from petroleum derived C9 fraction through a catalytic-polymerization technique. This product is used in marine paints and alkyd coatings to increase glossiness, adhesive power, hardness and resistance to acid and alkali. It can also increase bonding strength in adhesives and widen and brighten color in printing inks. 收起 | |
| L-Modified Petroleum Resin (C9) (L-150) | Shanghai Qilong Chemical Co., Ltd. | L-Modified Petroleum Resin (C9) (L-150) is a light yellow transparent granular solid and low molecular weight thermoplastic aromatic resin produced from petroleum derived C9 fraction through a catalytic-polymerization technique. This product is used in ma...展開 L-Modified Petroleum Resin (C9) (L-150) is a light yellow transparent granular solid and low molecular weight thermoplastic aromatic resin produced from petroleum derived C9 fraction through a catalytic-polymerization technique. This product is used in marine paints and alkyd coatings to increase glossiness, adhesive power, hardness and resistance to acid and alkali. It can also increase bonding strength in adhesives and widen and brighten color in printing inks. 收起 | |
| Licocene® PE MS 431 granules | Clariant Plastics & Coatings Ltd. | Licocene® PE MS 431 granules is a stabilized maleic anhydride grafted polyethylene wax. | |
| Licocene® PP 1302 granules | Clariant Plastics & Coatings Ltd. | Licocene® PP 1302 granules is a low melting, metallocene-technology based propylene-ethylene copolymer wax, which exhibits a low degree of crystallinity. | |
| Licocene® PP 1502 granules | Clariant Plastics & Coatings Ltd. | Licocene® PP 1502 granules is a low melting, metallocene-technology based propylene-ethylene copolymer, which exhibits a low degree of crystallinity. | |
| Licocene® PP 1602 granules | Clariant Plastics & Coatings Ltd. | Licocene® PP 1602 granules is a low melting, metallocene-technology based propylene-ethylene copolymer, which exhibits a low degree of crystallinity. | |
| Licocene® PP 2602 granules | Clariant Plastics & Coatings Ltd. | Licocene® PP 2602 granules is a low crystalline metallocene-technology based propylene-ethylene-copolymer. | |
| Licocene® PP 3602 granules | Clariant Plastics & Coatings Ltd. | Licocene® PP 3602 granules is a low crystalline metallocene-technology based propylene-ethylene-copolymer. | |
| Licocene® PP 6102 granules | Clariant Plastics & Coatings Ltd. | Licocene® PP 6102 granules is a low viscous, crystalline metallocene polypropylene wax. | |
| Licocene® PP MA 6252 granules | Clariant Plastics & Coatings Ltd. | Licocene® PP MA 6252 granules is a maleic anhydride grafted polypropylene wax. | |
| Licocene® PP MA 6452 granules | Clariant Plastics & Coatings Ltd. | Licocene® PP MA 6452 granules is a maleic anhydride grafted polypropylene wax. | |
| R-Modified Petroleum Resin (C9) (R-100) | Shanghai Qilong Chemical Co., Ltd. | R-Modified Petroleum Resin (C9) (R-100) is yellow to light brown transparent flakes and a low molecular weight thermoplastic aromatic resin developed from petroleum derived C9 fraction through a thermal-polymerization technique. This product has good and ...展開 R-Modified Petroleum Resin (C9) (R-100) is yellow to light brown transparent flakes and a low molecular weight thermoplastic aromatic resin developed from petroleum derived C9 fraction through a thermal-polymerization technique. This product has good and mutual solubility, water resistance, insulation, chemical stability over acid and alkali, adhesive strength, and low heat conduction. It can be used in synthetic hot melt adhesives with a softening point between 90-100°C. 收起 | |
| R-Modified Petroleum Resin (C9) (R-110) | Shanghai Qilong Chemical Co., Ltd. | R-Modified Petroleum Resin (C9) (R-110) is yellow to light brown transparent flakes and a low molecular weight thermoplastic aromatic resin developed from petroleum derived C9 fraction through a thermal-polymerization technique. This product has good and ...展開 R-Modified Petroleum Resin (C9) (R-110) is yellow to light brown transparent flakes and a low molecular weight thermoplastic aromatic resin developed from petroleum derived C9 fraction through a thermal-polymerization technique. This product has good and mutual solubility, water resistance, insulation, chemical stability over acid and alkali, adhesive strength, and low heat conduction. It can be used in synthetic hot melt adhesives with a softening point between 100-110°C. 收起 |
