| Dimer Acid | Anhui Elite Industrial Co., Ltd | Dimer Acid is a non-toxic, non-volatile, viscous, transparent acid which can dissolve in most organic solvents, but is water insoluble. This product has a viscosity between 6000 and 8500 and a density of 0.932 g/cm3. Dimer Acid provides viscosity and adhe...展開 Dimer Acid is a non-toxic, non-volatile, viscous, transparent acid which can dissolve in most organic solvents, but is water insoluble. This product has a viscosity between 6000 and 8500 and a density of 0.932 g/cm3. Dimer Acid provides viscosity and adhesion to plastic bump version of printing inks. 收起 | |
| G-Modified Petroleum Resin (C5/C9) (G-100) | Shanghai Qilong Chemical Co., Ltd. | G-Modified Petroleum Resin (C5/C9) (G-100) is pale yellow granular solids and an aliphatic modified aromatic resin obtained from the co-polymerizing of C5 and C9 fraction that derived from the by-product thermal cracking of naphtha. This product is often ...展開 G-Modified Petroleum Resin (C5/C9) (G-100) is pale yellow granular solids and an aliphatic modified aromatic resin obtained from the co-polymerizing of C5 and C9 fraction that derived from the by-product thermal cracking of naphtha. This product is often used as an ink additive or binder for hot melt road marking paint and tackifier for hot melt adhesives. 收起 | |
| G-Modified Petroleum Resin (C5/C9) (G-110) | Shanghai Qilong Chemical Co., Ltd. | G-Modified Petroleum Resin (C5/C9) (G-110) is pale yellow granular solids and an aliphatic modified aromatic resin obtained from the co-polymerizing of C5 and C9 fraction that derived from the by-product thermal cracking of naphtha. This product is often ...展開 G-Modified Petroleum Resin (C5/C9) (G-110) is pale yellow granular solids and an aliphatic modified aromatic resin obtained from the co-polymerizing of C5 and C9 fraction that derived from the by-product thermal cracking of naphtha. This product is often used as an ink additive or binder for hot melt road marking paint and tackifier for hot melt adhesives. 收起 | |
| L-Modified Petroleum Resin (C9) (L-110) | Shanghai Qilong Chemical Co., Ltd. | L-Modified Petroleum Resin (C9) (L-110) is a light yellow transparent granular solid and low molecular weight thermoplastic aromatic resin produced from petroleum derived C9 fraction through a catalytic-polymerization technique. This product is used in ma...展開 L-Modified Petroleum Resin (C9) (L-110) is a light yellow transparent granular solid and low molecular weight thermoplastic aromatic resin produced from petroleum derived C9 fraction through a catalytic-polymerization technique. This product is used in marine paints and alkyd coatings to increase glossiness, adhesive power, hardness and resistance to acid and alkali. It can also increase bonding strength in adhesives and widen and brighten color in printing inks. 收起 | |
| L-Modified Petroleum Resin (C9) (L-120) | Shanghai Qilong Chemical Co., Ltd. | L-Modified Petroleum Resin (C9) (L-120) is a light yellow transparent granular solid and low molecular weight thermoplastic aromatic resin produced from petroleum derived C9 fraction through a catalytic-polymerization technique. This product is used in ma...展開 L-Modified Petroleum Resin (C9) (L-120) is a light yellow transparent granular solid and low molecular weight thermoplastic aromatic resin produced from petroleum derived C9 fraction through a catalytic-polymerization technique. This product is used in marine paints and alkyd coatings to increase glossiness, adhesive power, hardness and resistance to acid and alkali. It can also increase bonding strength in adhesives and widen and brighten color in printing inks. 收起 | |
| L-Modified Petroleum Resin (C9) (L-130) | Shanghai Qilong Chemical Co., Ltd. | L-Modified Petroleum Resin (C9) (L-130) is a light yellow transparent granular solid and low molecular weight thermoplastic aromatic resin produced from petroleum derived C9 fraction through a catalytic-polymerization technique. This product is used in ma...展開 L-Modified Petroleum Resin (C9) (L-130) is a light yellow transparent granular solid and low molecular weight thermoplastic aromatic resin produced from petroleum derived C9 fraction through a catalytic-polymerization technique. This product is used in marine paints and alkyd coatings to increase glossiness, adhesive power, hardness and resistance to acid and alkali. It can also increase bonding strength in adhesives and widen and brighten color in printing inks. 收起 | |
| L-Modified Petroleum Resin (C9) (L-140) | Shanghai Qilong Chemical Co., Ltd. | L-Modified Petroleum Resin (C9) (L-140) is a light yellow transparent granular solid and low molecular weight thermoplastic aromatic resin produced from petroleum derived C9 fraction through a catalytic-polymerization technique. This product is used in ma...展開 L-Modified Petroleum Resin (C9) (L-140) is a light yellow transparent granular solid and low molecular weight thermoplastic aromatic resin produced from petroleum derived C9 fraction through a catalytic-polymerization technique. This product is used in marine paints and alkyd coatings to increase glossiness, adhesive power, hardness and resistance to acid and alkali. It can also increase bonding strength in adhesives and widen and brighten color in printing inks. 收起 | |
| L-Modified Petroleum Resin (C9) (L-150) | Shanghai Qilong Chemical Co., Ltd. | L-Modified Petroleum Resin (C9) (L-150) is a light yellow transparent granular solid and low molecular weight thermoplastic aromatic resin produced from petroleum derived C9 fraction through a catalytic-polymerization technique. This product is used in ma...展開 L-Modified Petroleum Resin (C9) (L-150) is a light yellow transparent granular solid and low molecular weight thermoplastic aromatic resin produced from petroleum derived C9 fraction through a catalytic-polymerization technique. This product is used in marine paints and alkyd coatings to increase glossiness, adhesive power, hardness and resistance to acid and alkali. It can also increase bonding strength in adhesives and widen and brighten color in printing inks. 收起 | |
| R-Modified Petroleum Resin (C9) (R-100) | Shanghai Qilong Chemical Co., Ltd. | R-Modified Petroleum Resin (C9) (R-100) is yellow to light brown transparent flakes and a low molecular weight thermoplastic aromatic resin developed from petroleum derived C9 fraction through a thermal-polymerization technique. This product has good and ...展開 R-Modified Petroleum Resin (C9) (R-100) is yellow to light brown transparent flakes and a low molecular weight thermoplastic aromatic resin developed from petroleum derived C9 fraction through a thermal-polymerization technique. This product has good and mutual solubility, water resistance, insulation, chemical stability over acid and alkali, adhesive strength, and low heat conduction. It can be used in synthetic hot melt adhesives with a softening point between 90-100°C. 收起 | |
| R-Modified Petroleum Resin (C9) (R-110) | Shanghai Qilong Chemical Co., Ltd. | R-Modified Petroleum Resin (C9) (R-110) is yellow to light brown transparent flakes and a low molecular weight thermoplastic aromatic resin developed from petroleum derived C9 fraction through a thermal-polymerization technique. This product has good and ...展開 R-Modified Petroleum Resin (C9) (R-110) is yellow to light brown transparent flakes and a low molecular weight thermoplastic aromatic resin developed from petroleum derived C9 fraction through a thermal-polymerization technique. This product has good and mutual solubility, water resistance, insulation, chemical stability over acid and alkali, adhesive strength, and low heat conduction. It can be used in synthetic hot melt adhesives with a softening point between 100-110°C. 收起 | |
| Silane Coupling Agent ELT-S 550 | Anhui Elite Industrial Co., Ltd | Silane Coupling Agent ELT-S 550 is a colorless, transparent liquid which is immediately soluble in water. This product has a molecular weight of 221.37 and a boiling point of 217 degrees Celsius. Silane Coupling Agent ELT-S 550 improves the adhesion of ad...展開 Silane Coupling Agent ELT-S 550 is a colorless, transparent liquid which is immediately soluble in water. This product has a molecular weight of 221.37 and a boiling point of 217 degrees Celsius. Silane Coupling Agent ELT-S 550 improves the adhesion of adhesives and coatings. 收起 | |
| Silane Coupling Agent ELT-S 551 | Anhui Elite Industrial Co., Ltd | Silane Coupling Agent ELT-S 551 is a colorless, transparent liquid which has a molecular weight of 179.29. This product has a boiling point of 88 degrees Celsius/ 15mmHg and a density of 1.016 g/cm3. Silane Coupling Agent ELT-S 551 improves adhesion in ad...展開 Silane Coupling Agent ELT-S 551 is a colorless, transparent liquid which has a molecular weight of 179.29. This product has a boiling point of 88 degrees Celsius/ 15mmHg and a density of 1.016 g/cm3. Silane Coupling Agent ELT-S 551 improves adhesion in adhesives and coatings. 收起 | |
| Silane Coupling Agent ELT-S 602 | Anhui Elite Industrial Co., Ltd | Silane Coupling Agent ELT-S 602 is a colorless, transparent liquid which has a molecular weight of 206.36. This product has a boiling point of 265 degrees Celsius and a density of between 0.965 and 0.975 g/cm3. Silane Coupling Agent ELT-S 602 acts as an a...展開 Silane Coupling Agent ELT-S 602 is a colorless, transparent liquid which has a molecular weight of 206.36. This product has a boiling point of 265 degrees Celsius and a density of between 0.965 and 0.975 g/cm3. Silane Coupling Agent ELT-S 602 acts as an adhesion promoter in adhesives and sealants. 收起 | |
| Silane Coupling Agent ELT-S 792 | Anhui Elite Industrial Co., Ltd | Silane Coupling Agent ELT-S 792 is a colorless to yellowish, transparent liquid which has a viscosity of 4.5 mm2/s. This product has a boiling point of between 114 and 118 degrees Celsius/2mmHg and a density of 1.04 g/cm3. Silane Coupling Agent ELT-S 792 ...展開 Silane Coupling Agent ELT-S 792 is a colorless to yellowish, transparent liquid which has a viscosity of 4.5 mm2/s. This product has a boiling point of between 114 and 118 degrees Celsius/2mmHg and a density of 1.04 g/cm3. Silane Coupling Agent ELT-S 792 acts as an adhesion promoter in PVC-based sealants. 收起 | |
| Vinyl Polymer Resin (VAH) ELT-VAAL | Anhui Elite Industrial Co., Ltd | Vinyl Polymer Resin (VAH) ELT-VAAL is a white or slight yellow powder which has a high molecular weight. This product has a molecular weight of 25000 and is also crosslinkable with amino resins, polyisocyanates, and other generic resins. This product pr...展開 Vinyl Polymer Resin (VAH) ELT-VAAL is a white or slight yellow powder which has a high molecular weight. This product has a molecular weight of 25000 and is also crosslinkable with amino resins, polyisocyanates, and other generic resins. This product provides blocking resistance, sand-ability, adhesion, and resistance to paint, coatings, adhesives, and inks. 收起 | |
| Vinyl Polymer Resin VAM Resin | Anhui Elite Industrial Co., Ltd | Vinyl Polymer Resin VAM Resin is a white powder with a high molecular weight. This product has a viscosity between 40 and 48 and is also approved for food contact applications by the FDA. Vinyl Polymer Resin VAM Resin provides flexibility and adhesion to...展開 Vinyl Polymer Resin VAM Resin is a white powder with a high molecular weight. This product has a viscosity between 40 and 48 and is also approved for food contact applications by the FDA. Vinyl Polymer Resin VAM Resin provides flexibility and adhesion to paint, coatings, adhesives, and inks. 收起 |
