BR 100 P | Arkema Rheology & Specialty Additives | BR 100 P is a water soluble non ionic polyurethane thickener suitable to thicken anionic and non ionic emulsions and particularly styrene acrylics, vinyl-acrylics and other copolymers. It is used in semil-gloss, interior and exterior flat emulsion paints,...展開 BR 100 P is a water soluble non ionic polyurethane thickener suitable to thicken anionic and non ionic emulsions and particularly styrene acrylics, vinyl-acrylics and other copolymers. It is used in semil-gloss, interior and exterior flat emulsion paints, anticorrosion paints and adhesives. 收起 | Request Sample |
BYK®-012 | BYK 毕克 | BYK®-012是一種礦物油,不含硅的消泡劑,適用於水性無VOC膠粘劑和密封劑 | |
BYK®-016 | BYK 毕克 | BYK®-016是一種礦物油,不含硅的消泡劑,適用於水性無VOC膠粘劑和密封劑 | |
BYK®-022 | BYK 毕克 | 含硅消泡劑,適用於水性膠粘劑和密封劑 | |
BYK®-023 | BYK 毕克 | 含硅消泡劑,適用於水性膠粘劑和密封劑 | |
BYK®-024 | BYK 毕克 | 含硅消泡劑,適用於基於水性乳膠的膠粘劑和密封劑 | |
BYK®-025 | BYK 毕克 | 含硅消泡劑,適用於基於水性乳膠的膠粘劑和密封劑 | |
BYK®-028 | BYK 毕克 | 含硅消泡劑,適用於基於水性乳膠的膠粘劑和密封劑 | |
BYK®-035 | BYK 毕克 | 用於有光澤和半光乳液漆以及乳液彈性體的礦物油消泡劑,消除生產和涂裝過程中的泡沫。特別適合聚氯乙烯含量為20-40%的乳液體系。高剪力不會對效力產生影響。 | |
BYK®-037 | BYK 毕克 | 礦物油消泡劑,適合乳膠漆、工業乳膠、乳液灰泥和乳液膠粘劑,用於消除生產和施工過程中產生的泡沫 | |
BYK®-038 | BYK 毕克 | 礦物油消泡劑,適用於乳膠漆、工業乳膠、乳液灰泥和乳膠膠粘劑,可消除其生產和施工過程中產生的泡沫 | |
BYK®-077 | BYK 毕克 | 硅樹脂消泡劑,防止油漆在生產過程中和用於非極性到高極性溶劑行體系時產生泡沫和氣泡。提高表面性能,特別是流平性,提高表面滑爽度,改善抗刮擦和耐劃傷性。 | |
BYK®-085 | BYK 毕克 | 含硅消泡劑和表面助劑,適用於溶劑型膠粘劑和密封劑。BYK®-085是BYK®-077的無溶劑版本,尤其適用於需要無溶劑助劑或需要特殊溶劑的體系 | |
BYK®-088 | BYK 毕克 | 含硅脫氣劑,推薦用於PUR基膠粘劑。也適用於環氧體系 | |
BYK®-092 | BYK 毕克 | BYK®-092 is a VOC-free, silicone-containing defoamer for aqueous paint systems, printing inks and adhesives. Wide range of uses for conventional application methods | |
BYK®-093 | BYK 毕克 | 高耐久性含硅消泡劑,適用於水性膠粘劑和密封劑。該消泡劑兼具高效性和廣泛的相容性 | |
BYK®-154 | BYK 毕克 | 基於水性乳膠的膠粘劑和密封劑用分散劑。北美市場不售賣BYK®-154,而是BYK®-156,它們的差別僅在於固含量 | |
BYK®-1610 | BYK 毕克 | BYK®-1610是一種消泡劑,適用於基於乳膠的膠粘劑和密封劑 | |
BYK®-1615 | BYK 毕克 | BYK®-1615是一種消泡劑,適用於基於水性乳膠的膠粘劑和密封劑 | |
BYK®-1630 | BYK 毕克 | BYK®-1630 is a VOC and APEO-free mineral oil defoamer for aqueous architectural coatings, general industrial coatings, floor coatings and adhesives. | |
BYK-1641 | BYK 毕克 | BYK-1641 is a VOC- and mineral oil-free defoamer for aqueous systems that is very easy to incorporate and has an excellent price-performance ratio. | |
BYK-1642 | BYK 毕克 | BYK-1642 is a polymer-based, VOC- and silicone-free defoamer for aqueous coatings, printing inks, adhesives, paper coatings, and construction chemicals. Optimum performance at the lowest dosage. | |
BYK-1745 | BYK 毕克 | BYK-1745 is a VOC- and silicone-free defoamer based on polymers and renewable as well as sustainable raw materials for aqueous adhesives and aqueous architectural coatings. | |
BYK®-1760 | BYK 毕克 | BYK®-1760 is an emission-free silicone and polymer-containing defoamer and air release agent for solvent-borne and solvent-free coatings, adhesives, sealants and casting resins. Particularly recommended for epoxy resin systems. | |
BYK®-1789 | BYK 毕克 | BYK®-1789 is a solvent-free, silicone-containing defoamer for aqueous, high build and fast-drying coating systems and adhesives. For improving air release and effectively preventing microfoam. | |
BYK®-3400 | BYK 毕克 | BYK®-3400是一種含硅表面助劑,適用於水性膠粘劑和密封劑。它可以降低表面張力,從而改善基材潤濕性 | |
BYK®-3410 | BYK 毕克 | BYK®-3410是一種無硅表面助劑,適用於水性膠粘劑和密封劑。它可以降低表面張力,從而改善基材潤濕性 | |
BYK®-345 | BYK 毕克 | 用於水性體系的硅樹脂表面活性劑。顯著降低表面張力,因而具有出色的基材滑爽性和流平性。是無溶劑型的BYK® 346。無泡沫穩定性,不會提高表面滑爽性或削弱再涂性。 | |
BYK®-346 | BYK 毕克 | 用於水性體系的硅樹脂表面活性劑。是提高水性體系的基材潤濕性的標准添加劑。用於含3-7%共溶劑的體系中時具有最適宜的效率。顯著降低表面張力。 | |
BYK®-347 | BYK 毕克 | 用於水性體系的硅樹脂表面活性劑。顯著降低表面張力,因而具有出色的基材滑爽性和流平性。不會提高表面滑爽性或削弱再涂性。 | |
BYK®-348 | BYK 毕克 | 用於水性體系的硅樹脂表面活性劑。顯著降低表面張力,因而具有良好的基材滑爽性和流平性。無泡沫穩定性,不會提高表面滑爽性或削弱再涂性。適合用於無溶劑型水性配方。 | |
BYK®-349 | BYK 毕克 | BYK®-349是一種用於水性體系的硅樹脂表面活性劑。BYK®-349特別適合基於丙烯酸、苯丙、丙烯酸 PU組合、可交聯聚氨酯和烘干體系的各種水性配方。 | |
BYK®-3764 | BYK 毕克 | BYK®-3764 is a solvent-free silicone surface additive for aqueous, solvent-borne and solvent-free coatings and adhesives to increase surface slip and to greatly reduce surface tension. Minor foam stabilization and low dosage. | |
BYK®-3771 | BYK 毕克 | BYK®-3771 is a silicone surface additive for solvent-free, radiation-curable, and solvent-borne coatings, adhesives, and printing inks with a strong reduction in the surface tension. OH-functional and solvent-free. | |
BYK®-4509 | BYK 毕克 | BYK-4509 is an adhesion promoter for solvent-borne and aqueous systems applied to metallic substrates. It is compatible with most binders and is therefore ideal for universal use. This product is a salt of a polymer with acidic groups. | |
BYK®-4512 | BYK 毕克 | BYK®-4512 is an adhesion promoter for solvent-borne systems applied to metal substrates. It is particularly well-suited for use in chromate-free primers and on metal substrates that are pre-treated in a chromate-free manner. | |
BYK®-9076 | BYK 毕克 | BYK®-9076是一種高分子量助劑,適用於無溶劑膠粘劑和密封劑,BYK®-9076尤其適用於酸性和中性炭黑的穩定 | |
BYK®-9077 | BYK 毕克 | 用於無溶劑型濃縮顏料的新型高分子添加劑,用來穩定基本型碳黑。低黏度、高顏料承載量﹔在羥基官能聚醚/增塑劑等無溶劑型載體中穩定。 | |
BYK®-A 530 | BYK 毕克 | 脫氣劑和消泡劑,適合溶劑型和無溶劑環氧體系 | |
BYK®-A 535 | BYK 毕克 | 無硅消泡劑/脫氣劑,適用於無溶劑和溶劑型環氧和PUR基膠粘劑和密封劑 | |
BYK®-A 550 | BYK 毕克 | BYK®-A 550具有強脫氣效果,卻不會導致強霧影效果 | |
BYK®-A 555 | BYK 毕克 | BYK®-A 555應用於各種膠粘劑具有最高效率 | |
BYK®-DYNWET 800 | BYK 毕克 | BYK®-DYNWET 800是一種無硅表面助劑,適用於水性膠粘劑和密封劑。它可降低快速施工過程中的動態表面張力,從而改善基材潤濕性 | |
BYK-P 2710 | BYK 毕克 | BYK-P 2710 is a processing additive for solvent-free and solvent-borne epoxy resins for the adjustment of rheological properties of 2-K systems in combination with hydrophilic fumed silica (Thixbreaker). | |
BYK-P 2720 | BYK 毕克 | BYK-P 2720 is a rheology additive for solvent-free and solvent-borne amine hardeners to enhance the rheological properties of two-component systems in combination with hydrophilic fumed silica (Thixbooster). | |
BYK®-W 940 | BYK 毕克 | BYK®-W 940可阻止礦物填料例如碳酸鈣和三氫氧化鋁的沉降,並減少無機和有機顏料的浮色和發花 | |
BYK®-W 961 | BYK 毕克 | BYK®-W 961可作為潤濕和分散劑,阻止礦物填料沉降 | |
BYK®-W 966 | BYK 毕克 | BYK®-W 966可增加聚酯樹脂體系中各種最常用填料例如碳酸鈣和三氫氧化鋁的分散。它可降低粘度,從而使更高顏填料負載量成為可能,它還可防止沉降 | |
BYK®-W 969 | BYK 毕克 | BYK®-W 969可作為膠粘劑和密封劑的潤濕和分散劑,並降低其粘度 | |
BYK®-W 980 | BYK 毕克 | BYK®-W 980可增加各種最常用填料例如碳酸鈣和三氫氧化鋁的分散。它可降低粘度,從而使更高顏填料負載量成為可能,它還可防止沉降 | |
BYK®-W 985 | BYK 毕克 | BYK®-W 985可增加最常用填料例如碳酸鈣和三氫氧化鋁的潤濕和分散速度。它可極大地降低粘度,從而使更高顏填料負載量成為可能。BYK®-W 985通常不起防沉降作用 | |
BYKANOL-A | BYK 毕克 | BYKANOL-A is an anti-gelling additive for solvent-borne coatings to prevent increased viscosity in air-drying and baking coatings, gelling in long-term storage, and skin formation in oxidative-drying systems. Suitable for post addition. | |
BYKJET-9171 | BYK 毕克 | BYKJET-9171 is a solvent-free wetting and dispersing additive for aqueous inkjet inks.It is particularly suitable for stabilizing organic pigments and disperse dyes. It greatly reduces the viscosity of the mill base, which enables a higher pigment content...展開 BYKJET-9171 is a solvent-free wetting and dispersing additive for aqueous inkjet inks.It is particularly suitable for stabilizing organic pigments and disperse dyes. It greatly reduces the viscosity of the mill base, which enables a higher pigment content in pigment concentrates. It is particularly recommended for binder-free grinding. 收起 | |
CLAYTONE 34 | BYK 毕克 | CLAYTONE 34 is a modified montmorillonite designed for use in aliphatic systems containing aromatic solvent or aromatic-aliphatic solvent blends which display moderate polarity. It demonstrates high gelling efficiency, reproducible viscosity and thixotrop...展開 CLAYTONE 34 is a modified montmorillonite designed for use in aliphatic systems containing aromatic solvent or aromatic-aliphatic solvent blends which display moderate polarity. It demonstrates high gelling efficiency, reproducible viscosity and thixotropic development, a high degree of sag control and prevents hard settling of pigments and fillers. CLAYTONE 34 has proven to be a reliable and reproducible rheological additive for use in oil based paints, stains, alkyd enamels and primers, and epoxy systems. 收起 | |
CLAYTONE® 40 | BYK 毕克 | Claytone® 40是一種親有機膨潤土衍生物,用作觸變增稠劑和抗沉降劑,用於低到中等極性溶劑型塗料。這是一個傳統的有機粘土,需要添加活化劑以獲取充分的效能。作為親有機的蒙脫石產品,它可以在有機介質中溶脹,並建立一種凝膠結構(紙房狀構造)。單蒙脫石片層之間的弱氫鍵是此觸變凝膠結構的原因。為了獲取最佳效率,片層的完全分離是必要的(附聚物解聚成初級粒子完全分散)。 | |
CLAYTONE® AF | BYK 毕克 | Claytone® AF是一種改性蒙脫石,用於含低到中等極性的脂肪族溶劑和脂肪族 - 芳香族溶劑混合物的體系。Claytone®產生可重複的黏度和觸變控制,高程度流掛控制,並防止顏料沉降。Claytone® AF是自分散的,不需要極性活化劑。Claytone® AF無需高剪切力或預凝膠。 | |
CLAYTONE® APA | BYK 毕克 | Claytone® APA是一種改性蒙脫石,用於含中等到高極性的芳香族溶劑或芳香族氧化物溶劑混合物的體系。Claytone® APA具有高凝膠效率、可重複的黏度和觸變控制,高程度流掛控制,並防止顏料和填料沉降。 | |
CLAYTONE® HT | BYK 毕克 | Claytone® HT是一種改性蒙脫石,用於含低到中等極性的芳香族溶劑和脂肪族溶劑的體系。Claytone® HT具有高凝膠效率、可重複的黏度和觸變控制,高程度流掛控制,並防止顏料和填料沉降。本產品是一種高性能的流變助劑,用於在高性能的油性塗料,特別適合於工業、船舶和防護塗料。 | |
CLAYTONE® HY | BYK 毕克 | Claytone® HY是一種改性蒙脫石,用於低到中等極性的印刷油墨。Claytone® HY具有高凝膠效率、可增加黏度和屈服值,防止顏料聚集、沉降,減少起霧,並使油墨生產商可控制粘性粘度。 | |
CLAYTONE-40 | BYK 毕克 | TIXOGEL® VP是一個觸變、防沉降劑,可用於低到中等極性體系。為了達到最佳的效率,TIXOGEL® VP應使用高剪切力分散。 | |
CLAYTONE-EM | BYK 毕克 | CLAYTONE-EM is a high efficiency rheological additive suitable for use in synthetic base fluids and all-oil systems to increase the carrying capacity and hole cleaning capabilities. The product is also an effective suspension agent for polymer slurries. | |
CLAYTONE-ER | BYK 毕克 | CLAYTONE-ER is a high efficiency rheological additive suitable for use in mineral oil and synthetic base fluids to increase the carrying capacity and hole cleaning capabilities. The product is also an effective suspension agent for polymer slurries. | |
CLAYTONE-IMG 400 | BYK 毕克 | CLAYTONE-IMG 400 is a general purpose rheological additive for diesel and mineral oil based drilling fluids to increase the carrying capacity and hole cleaning capabilities. | |
CLAYTONE-MPZ | BYK 毕克 | TIXOGEL® MPZ是最高性能有機粘土系列產品。它是一種高效觸變增稠劑、抗沉降劑,用於中等到高極性的的系統。高極性體系中沒必要添加活化劑是一種規則,但對於中等極性體系有益。 | |
CLAYTONE-SF | BYK 毕克 | CLAYTONE-SF is an ultra high efficiency rheological suitable for use in mineral oil and synthetic base fluids to increase the carrying capacity and hole cleaning capabilities. The product is also an effective suspension agent for polymer slurries. | |
Coadis™ 173 | Arkema Rheology & Specialty Additives | Coadis™ 173 is a versatile polyacid dispersing agent imparting an excellent performance accross a wide range of waterborne paint formulations. It is designed for flat to semi-gloss paints, anticorrosion paints, caulks and sealants and other formulations s...展開 Coadis™ 173 is a versatile polyacid dispersing agent imparting an excellent performance accross a wide range of waterborne paint formulations. It is designed for flat to semi-gloss paints, anticorrosion paints, caulks and sealants and other formulations showing high rates of mineral pigments and requiring a limited water absorption. Also suitable for oxide pigments and more specifically zinc oxides. 收起 | Request Sample |
Coadis™ 790 | Arkema Rheology & Specialty Additives | Coadis™ 790 is a high molecular weight wetting and dispersing agent for water-based industrial & architectural coatings, inks and pigment concentrates. It is supplied as a solution of block copolymer with pigment anchorage groups. It is a low viscosity, n...展開 Coadis™ 790 is a high molecular weight wetting and dispersing agent for water-based industrial & architectural coatings, inks and pigment concentrates. It is supplied as a solution of block copolymer with pigment anchorage groups. It is a low viscosity, non-ionic, and APEO-, VOC- and solvent-free grade. 收起 | Request Sample |
Coadis™ BR 3 | Arkema Rheology & Specialty Additives | Coadis™ BR 3 is an acrylic copolymer dispersing agent particularly suitable for water or glycol based titanium dioxide and iron oxides dispersions. | Request Sample |
Coapur™ 2020 W | Arkema Rheology & Specialty Additives | Coapur™ 2020 W is a solvent and Alkyl Phenol Ethoxylate (APE) free associative polyrethane thickener designed for water based formulations. Coapur™ 2020 W can be used sole or in combination either with other polyrethane thickeners or with any type of rheo...展開 Coapur™ 2020 W is a solvent and Alkyl Phenol Ethoxylate (APE) free associative polyrethane thickener designed for water based formulations. Coapur™ 2020 W can be used sole or in combination either with other polyrethane thickeners or with any type of rheology modifiers such as acrylic or cellulosic thickeners, acting at low shear rates. Coapur™ 2020 W is a pure associative thickener. It is designed to interact strongly with the blinder of the formulation, in order to control the rheology at high shear rates. Coapur™ 2020 W helps to match the highest coating quality possible for water-based formulations. 收起 | Request Sample |
Coapur™ 2025 | Arkema Rheology & Specialty Additives | Coapur™ 2025 is a solvent-free and APEO free pure associative polyurethane thickener (also called HEUR, NISAT or NSAT). It is designed to interact stringly with the binder of the formulation, in order to control the rheology at high shear rates. | Request Sample |
Coapur™ 2501 | Arkema Rheology & Specialty Additives | Coapur™ 2501 is a non-ionic, associative and solvent free polyurethane (HEUR) rheology modifier providing a pure Newtonian rheology to water-borne systems. Coapur™ 2501 allows to adjust selectively high shear viscosities and thus ensures excellent film bu...展開 Coapur™ 2501 is a non-ionic, associative and solvent free polyurethane (HEUR) rheology modifier providing a pure Newtonian rheology to water-borne systems. Coapur™ 2501 allows to adjust selectively high shear viscosities and thus ensures excellent film build, spatter resistance and levelling together flexibility of use. 收起 | Request Sample |
Coapur™ 3020 | Arkema Rheology & Specialty Additives | Coapur™ 3020 is a solvent-free and APEO free pure associative polyurethane thickener (also called HEUR, NISAT or NSAT). It provides a pure Newtonian rheology to water-borne systems. It allow to adjust selectively high shear viscosities and thus ensures ex...展開 Coapur™ 3020 is a solvent-free and APEO free pure associative polyurethane thickener (also called HEUR, NISAT or NSAT). It provides a pure Newtonian rheology to water-borne systems. It allow to adjust selectively high shear viscosities and thus ensures excellent film build, spatter resistance and leveling together with low dosage and flexibility of use. 收起 | Request Sample |
Coapur™ 3020 BB | Arkema Rheology & Specialty Additives | Coapur™ 3020 BB is a solvent-free and APEO free pure associative polyurethane thickener (also called HEUR, NISAT or NSAT). It provides a pure Newtonian rheology to water-borne systems. It allow to adjust selectively high shear viscosities and thus ensures...展開 Coapur™ 3020 BB is a solvent-free and APEO free pure associative polyurethane thickener (also called HEUR, NISAT or NSAT). It provides a pure Newtonian rheology to water-borne systems. It allow to adjust selectively high shear viscosities and thus ensures excellent film build, spatter resistance and leveling together with low dosage and flexibility of use. 收起 | Request Sample |
Coapur™ 3025 | Arkema Rheology & Specialty Additives | Coapur™3025 is a solvent-free and APEO free pure associative polyurethane thickener (also called HEUR, NISAT or NSAT). It provides a pure Newtonian rheology t owater-borne systems. It allow to adjust selectively high shear viscosities and thus ensures exc...展開 Coapur™3025 is a solvent-free and APEO free pure associative polyurethane thickener (also called HEUR, NISAT or NSAT). It provides a pure Newtonian rheology t owater-borne systems. It allow to adjust selectively high shear viscosities and thus ensures excellent film build, spatter resistance and leveling together with low dosage and flexibility of use. 收起 | Request Sample |
Coapur™ 520 W | Arkema Rheology & Specialty Additives | Coapur™ 520 W is a solvent-free and APEO-free HEUR thickener. It provides a very balanced rheology profile contributing to high-shear viscosities and medium-shear viscosities. As a consequence it provides a very good leveling in satin paints and improve s...展開 Coapur™ 520 W is a solvent-free and APEO-free HEUR thickener. It provides a very balanced rheology profile contributing to high-shear viscosities and medium-shear viscosities. As a consequence it provides a very good leveling in satin paints and improve significantly spattering resistance while offering also some antisettling properties. Furthermore, it provides very good response and efficiency in VAE binders. This new polyurethane thickener could therefore easily replace the use of a combination of high-shear and low-shear thickeners. 收起 | Request Sample |
Coapur™ 6050 | Arkema Rheology & Specialty Additives | Coapur™ 6050 is a solvent-free and APEO free pure associative polyurethane thickener (also called HEUR, NISAT or NSAT). Designed for fine rheological adjustment of flat or semi-gloss paints. It is characterised by its excellent thickening at low shear ra...展開 Coapur™ 6050 is a solvent-free and APEO free pure associative polyurethane thickener (also called HEUR, NISAT or NSAT). Designed for fine rheological adjustment of flat or semi-gloss paints. It is characterised by its excellent thickening at low shear rates. 收起 | Request Sample |
Coapur™ 817 W | Arkema Rheology & Specialty Additives | Coapur™ 817 W is a solvent-free and APEO free pure associative polyurethane thickener (also called HEUR, NISAT or NSAT). It can be used sole or in combination with other polyurethane thickeners or with other types of rheology modifiers such as acrylic or ...展開 Coapur™ 817 W is a solvent-free and APEO free pure associative polyurethane thickener (also called HEUR, NISAT or NSAT). It can be used sole or in combination with other polyurethane thickeners or with other types of rheology modifiers such as acrylic or cellulosic thickeners. It increaseases specifically viscosities at medium and high shear rates in order to improve tool load, film build, leveling and brush drag. 收起 | Request Sample |
Coapur™ 830 W | Arkema Rheology & Specialty Additives | Coapur™ 830 W is a solvent-free and APEO free pure associative polyurethane thickener (also called HEUR, NISAT or NSAT). It can be used sole or in combination with other polyurethane thickeners or with other types of rheology modifiers such as acrylic or ...展開 Coapur™ 830 W is a solvent-free and APEO free pure associative polyurethane thickener (also called HEUR, NISAT or NSAT). It can be used sole or in combination with other polyurethane thickeners or with other types of rheology modifiers such as acrylic or cellulosic thickeners. It increaseases specifically viscosities at medium and high shear rates in order to improve tool load, film build, leveling and brush drag. It is a 30% solids version of Coapur™ 817 W. 收起 | Request Sample |
Coapur™ 980 W | Arkema Rheology & Specialty Additives | Coapur™ 980 W is a solvent-free and APEO free pure associative polyurethane thickener (also called HEUR, NISAT or NSAT). It offers a unique pseudoplastic rheology profile, performing strongly at medium shear rates while contributing significantly at high ...展開 Coapur™ 980 W is a solvent-free and APEO free pure associative polyurethane thickener (also called HEUR, NISAT or NSAT). It offers a unique pseudoplastic rheology profile, performing strongly at medium shear rates while contributing significantly at high shear rates. 收起 | Request Sample |
Coapur™ XS 12 | Arkema Rheology & Specialty Additives | Coapur™ XS 12 is a solvent and Alkyl Phenol Ethoxylate (APE) free associative polyurethane thickener designed for water-based formulations. Coapur™ XS 12 can be used sole or in combination either with other polyurethane thickeners or with any type of rheo...展開 Coapur™ XS 12 is a solvent and Alkyl Phenol Ethoxylate (APE) free associative polyurethane thickener designed for water-based formulations. Coapur™ XS 12 can be used sole or in combination either with other polyurethane thickeners or with any type of rheology modifiers such as acrylic or cellulosic thickeners, acting at low shear rates. Coapur™ XS 12 is a pure associative thickener. 收起 | Request Sample |
Coapur™ XS 22 | Arkema Rheology & Specialty Additives | Coapur™ XS 22 is a solvent-free and APEO free pure associative polyurethane thickener (also called HEUR, NISAT or NSAT). It has been especially designed to offer a good reactivity with alkyd emulsion systems. | Request Sample |
Coapur™ XS 71 | Arkema Rheology & Specialty Additives | Coapur™ XS 71 is a solvent-free and APEO free pure associative polyurethane thickener (also called HEUR, NISAT or NSAT). It combines high in-can viscosity with excellent pigment compatibility with a unique pseudoplastic rheology profile. Its use limits vi...展開 Coapur™ XS 71 is a solvent-free and APEO free pure associative polyurethane thickener (also called HEUR, NISAT or NSAT). It combines high in-can viscosity with excellent pigment compatibility with a unique pseudoplastic rheology profile. Its use limits viscosity drop after pigment paste addition, eliminates pigment flooding and floating during storage and enables to match excellent results based on rub-out test. 收起 | Request Sample |
Coapur™ XS 83 | Arkema Rheology & Specialty Additives | Coapur™ XS 83 is a solvent-free and APEO free pure associative polyurethane thickener (also called HEUR, NISAT or NSAT). It provides an exceptional pseudoplastic behaviour with very limited effect on high shear viscosities. It imparts very good sag resist...展開 Coapur™ XS 83 is a solvent-free and APEO free pure associative polyurethane thickener (also called HEUR, NISAT or NSAT). It provides an exceptional pseudoplastic behaviour with very limited effect on high shear viscosities. It imparts very good sag resistance, sprayability and good compromise in terms of flow and leveling. 收起 | Request Sample |
CRAYVALLAC® ANTISETTLE CVP | Arkema Rheology & Specialty Additives | CRAYVALLAC® ANTISETTLE CVP is a 100 % active and bio-sourced castor derivative rheology modifier for solvent-based and solvent-free systems. CRAYVALLAC® ANTISETTLE CVP is suited to coating systems based on aliphatic hydrocarbons. It shows excellent contro...展開 CRAYVALLAC® ANTISETTLE CVP is a 100 % active and bio-sourced castor derivative rheology modifier for solvent-based and solvent-free systems. CRAYVALLAC® ANTISETTLE CVP is suited to coating systems based on aliphatic hydrocarbons. It shows excellent control of sedimentation combined with ease of application. In addition to coatings applications, CRAYVALLAC® ANTISETTLE CVP has also been used successfully in a multitude of other applications such as inks, adhesives, mastics, caulks, sealants, fillers, greases and lubricants. 收起 | Request Sample |
CRAYVALLAC® LA-150 | Arkema Rheology & Specialty Additives | CRAYVALLAC® LA-150 is a pourable liquid rheology modifier supplied in Dimethylsulfoxide (DMSO) for post addition to medium to high polarity solvent based coatings. It shows excellent control of sedimentation combined with ease of application. | Request Sample |
CRAYVALLAC® LA-377 | Arkema Rheology & Specialty Additives | CRAYVALLAC® LA-377 is a modified urea dissolved in DMSO. CRAYVALLAC® LA-377 is a pourable liquid rheology modifier for post addition to water-based coatings such as water-dilutable alkyds and acrylic emulsions. It was developed to ensure particular suitab...展開 CRAYVALLAC® LA-377 is a modified urea dissolved in DMSO. CRAYVALLAC® LA-377 is a pourable liquid rheology modifier for post addition to water-based coatings such as water-dilutable alkyds and acrylic emulsions. It was developed to ensure particular suitability for metal coating as its formula is lithium chloride-free. CRAYVALLAC® LA-377 should be added to the coating as a slow stream under low to medium shear conditions to ensure sufficient dispersion. Although efficient stirring is required to ensure homogeneity, elevated temperatures are not required for activation and the use of excessive shear should be avoided. 收起 | Request Sample |
CRAYVALLAC® MT | Arkema Rheology & Specialty Additives | CRAYVALLAC® MT is a 100 % active and highly bio-sourced modified castor derivative rheology modifier for solvent-based and solvent-free systems. CRAYVALLAC® MT is suited to coating systems based on aliphatic hydrocarbons, aromatic hydrocarbons and aromati...展開 CRAYVALLAC® MT is a 100 % active and highly bio-sourced modified castor derivative rheology modifier for solvent-based and solvent-free systems. CRAYVALLAC® MT is suited to coating systems based on aliphatic hydrocarbons, aromatic hydrocarbons and aromatic hydrocarbon/alcohol blends. It shows excellent control of sedimentation combined with ease of application. 收起 | Request Sample |
CRAYVALLAC® OPTIMA | Arkema Rheology & Specialty Additives | CRAYVALLAC® OPTIMA is a high-performance, micronized amide wax rheology modifier suitable for high-solids and solvent-free applications recommended for its ease of activation and smooth viscosity recovery (good leveling). CRAYVALLAC® OPTIMA overcomes thos...展開 CRAYVALLAC® OPTIMA is a high-performance, micronized amide wax rheology modifier suitable for high-solids and solvent-free applications recommended for its ease of activation and smooth viscosity recovery (good leveling). CRAYVALLAC® OPTIMA overcomes those difficulties that exist with hydrogenated castor oil-based rheology modifiers e.g. seeding and false-body without the need to increase the temperature of activation. Its smooth viscosity recovery will help to achieve high film thickness without compromising good leveling. 收起 | Request Sample |
CRAYVALLAC® PA3 X 20 | Arkema Rheology & Specialty Additives | CRAYVALLAC® PA3 X 20 is a pre-activated amide wax dispersed in a mixture of xylene and alcohols. It is a rheology modifier in paste form for post-addition to solvent-based industrial coatings and industrial wood finishes. The use of CRAYVALLAC® PA3 X 20 p...展開 CRAYVALLAC® PA3 X 20 is a pre-activated amide wax dispersed in a mixture of xylene and alcohols. It is a rheology modifier in paste form for post-addition to solvent-based industrial coatings and industrial wood finishes. The use of CRAYVALLAC® PA3 X 20 provides a very simple and direct means of introducing shear-thinning rheology with thixotropic viscosity recovery to coating formulations. 收起 | Request Sample |
CRAYVALLAC® PF | Arkema Rheology & Specialty Additives | CRAYVALLAC® PF is a modified micronised hydrogenated castor oil rheology modifier specially designed to facilitate the incorporation in powder form for better activation and easier handling. The activation process is the conversion of the CRAYVALLAC® PF f...展開 CRAYVALLAC® PF is a modified micronised hydrogenated castor oil rheology modifier specially designed to facilitate the incorporation in powder form for better activation and easier handling. The activation process is the conversion of the CRAYVALLAC® PF fine particles to an interacting network of fibers. It is this network that gives rise to the final system’s shear thinning rheology. This shear-thinning behavior provides a very high viscosity under the low shear rates associated with sedimentation, and a low viscosity at the much higher application shear rates. The net result is excellent control of sedimentation combined with ease of application. CRAYVALLAC® PF is suitable for a multitude of applications. 收起 | Request Sample |
CRAYVALLAC® SF | Arkema Rheology & Specialty Additives | CRAYVALLAC® SF is a proprietary amide-modified hydrogenated castor oil rheology modifier with enhanced tolerance to temperature and solvent strength suitable for a variety of different solvent-based systems e.g. aromatic hydrocarbons and aromatic hydrocar...展開 CRAYVALLAC® SF is a proprietary amide-modified hydrogenated castor oil rheology modifier with enhanced tolerance to temperature and solvent strength suitable for a variety of different solvent-based systems e.g. aromatic hydrocarbons and aromatic hydrocarbon/alcohol blends. Compared to other hydrogenated castor oil-based rheology modifiers, CRAYVALLAC® SF is more tolerant to strong solvents and high processing temperatures due to the presence of its unique performance-enhancing amide. The activation process constitutes the conversion of the CRAYVALLAC® SF particles to an interacting network of fiber-like particles. It is this network that gives rise to the final coating’s shear-thinning rheology. This shear thinning characteristic provides a very high viscosity under the low shear rates associated with sedimentation, and a low viscosity at the much higher application shear rates. The net result is excellent control of sedimentation combined with ease of application. 收起 | Request Sample |
CRAYVALLAC® SL | Arkema Rheology & Specialty Additives | CRAYVALLAC® SL is a high-performance micronized amide wax rheology modifier designed for the high-temperature manufacture of moisture curing methoxy silane systems, where processing temperatures typically lie within the range of 90 – 115°C. CRAYVALLAC® SL...展開 CRAYVALLAC® SL is a high-performance micronized amide wax rheology modifier designed for the high-temperature manufacture of moisture curing methoxy silane systems, where processing temperatures typically lie within the range of 90 – 115°C. CRAYVALLAC® SL particles are converted to an interacting network of crystalline fibers. It is this network that gives rise to the shear thinning rheology. This shear thinning characteristic provides for a low viscosity at the shear rates associated with application by extrusion, and a very high viscosity under the low shear rates experienced after application. The net result is ease of application followed by excellent sag and slump resistance. 收起 | Request Sample |
CRAYVALLAC® SLT | Arkema Rheology & Specialty Additives | CRAYVALLAC® SLT is a 100 % active and highly bio-sourced polyamide powder rheology modifier designed for the low temperature manufacture of moisture curing methoxysilane based sealants and adhesives where processing temperatures typically lie within the r...展開 CRAYVALLAC® SLT is a 100 % active and highly bio-sourced polyamide powder rheology modifier designed for the low temperature manufacture of moisture curing methoxysilane based sealants and adhesives where processing temperatures typically lie within the range 30 - 80°C. It imparts a shear thinning rheology profile allowing ease of application followed by excellent sag and slump resistance. 收起 | Request Sample |
CRAYVALLAC® SLW | Arkema Rheology & Specialty Additives | CRAYVALLAC® SLW is a 100 % active and highly bio-sourced polyamide rheology modifier designed for manufacture of reactive adhesives & sealants, especially high tack systems (high filler content, demanding applications…). CRAYVALLAC® SLW is specially desi...展開 CRAYVALLAC® SLW is a 100 % active and highly bio-sourced polyamide rheology modifier designed for manufacture of reactive adhesives & sealants, especially high tack systems (high filler content, demanding applications…). CRAYVALLAC® SLW is specially designed for manufacture of one-component Silyl-Terminated-Polymer systems where processing temperatures typically lie within the range 55 - 90°C. It imparts a shear thinning rheology profile allowing ease of application followed by excellent sag and slump resistance. 收起 | Request Sample |
CRAYVALLAC® SLX | Arkema Rheology & Specialty Additives | CRAYVALLAC® SLX is a 100 % active and highly bio-sourced polyamide powder rheology modifier designed for the low temperature manufacture of moisture curing methoxysilane based sealants and adhesives where processing temperatures typically lie within the r...展開 CRAYVALLAC® SLX is a 100 % active and highly bio-sourced polyamide powder rheology modifier designed for the low temperature manufacture of moisture curing methoxysilane based sealants and adhesives where processing temperatures typically lie within the range 60 - 90°C. It imparts a shear thinning rheology profile allowing ease of application followed by excellent sag and slump resistance. 收起 | Request Sample |
CRAYVALLAC® WN-1495 | Arkema Rheology & Specialty Additives | CRAYVALLAC® WN-1495 is a very finely micronised polyethylene wax which provides the formulator with means of controlling a coating’s frictional characteristics as well as enhancing its surface properties. CRAYVALLAC® WN-1495 is suitable for use in a wide ...展開 CRAYVALLAC® WN-1495 is a very finely micronised polyethylene wax which provides the formulator with means of controlling a coating’s frictional characteristics as well as enhancing its surface properties. CRAYVALLAC® WN-1495 is suitable for use in a wide range of coating applications, and in some cases it offers the formulator additional performance benefits. 收起 | Request Sample |
DISPERBYK®-118 | BYK 毕克 | DISPERBYK®-118 is a wetting and dispersing additive for solvent-borne systems to stabilize acidic, neutral and basic titanium dioxides, colored inorganic pigments, transparent iron oxides, fillers, and effect pigments. The additive improves the wetting an...展開 DISPERBYK®-118 is a wetting and dispersing additive for solvent-borne systems to stabilize acidic, neutral and basic titanium dioxides, colored inorganic pigments, transparent iron oxides, fillers, and effect pigments. The additive improves the wetting and dispersing of all inorganic fillers such as calcium carbonate and aluminum hydroxide (ATH). DISPERBYK®-118 is all-purpose for titanium dioxides. The additive causes lower viscosity and enables higher filler loading. 收起 | |
DISPERBYK-168 TF | BYK 毕克 | DISPERBYK-168 TF is a wetting and dispersing additive for solvent-free, radiation curable coatings, printing inks and adhesives. DISPERBYK-168 TF is the tin-free variant of DISPERBYK-168 in GPTA. | |
DISPERBYK®-180 | BYK 毕克 | 水性、溶劑型和無溶劑膠粘劑和密封劑用潤濕和分散劑 | |
DISPERBYK®-190 | BYK 毕克 | 水性膠粘劑和密封劑用潤濕和分散劑 |