UL Prospector
Prospector
Company: BYK 毕克  Company: LANXESS (former Emerald Performance Materials)  Company: ChemFine International Co., Ltd.  Company: AlzChem  Clear All 

成功!

成功保存搜索結果
159 條結果
2,2-Dibromo-3-Nitrilopropionamide (DBNPA) ChemFine International Co., Ltd. 2,2-Dibromo-3-Nitrilopropionamide (DBNPA) is a kind of wide spectrum, high efficiency, industrial germicide that can be used in paint and as an adhesive.
BYK®-012 BYK 毕克 BYK®-012是一種礦物油，不含硅的消泡劑，適用於水性無VOC膠粘劑和密封劑
BYK®-016 BYK 毕克 BYK®-016是一種礦物油，不含硅的消泡劑，適用於水性無VOC膠粘劑和密封劑
BYK®-022 BYK 毕克 含硅消泡劑，適用於水性膠粘劑和密封劑
BYK®-023 BYK 毕克 含硅消泡劑，適用於水性膠粘劑和密封劑
BYK®-024 BYK 毕克 含硅消泡劑，適用於基於水性乳膠的膠粘劑和密封劑
BYK®-025 BYK 毕克 含硅消泡劑，適用於基於水性乳膠的膠粘劑和密封劑
BYK®-028 BYK 毕克 含硅消泡劑，適用於基於水性乳膠的膠粘劑和密封劑
BYK®-035 BYK 毕克 用於有光澤和半光乳液漆以及乳液彈性體的礦物油消泡劑，消除生產和涂裝過程中的泡沫。特別適合聚氯乙烯含量為20-40%的乳液體系。高剪力不會對效力產生影響。
BYK®-037 BYK 毕克 礦物油消泡劑，適合乳膠漆、工業乳膠、乳液灰泥和乳液膠粘劑，用於消除生產和施工過程中產生的泡沫
BYK®-038 BYK 毕克 礦物油消泡劑，適用於乳膠漆、工業乳膠、乳液灰泥和乳膠膠粘劑，可消除其生產和施工過程中產生的泡沫
BYK®-077 BYK 毕克 硅樹脂消泡劑，防止油漆在生產過程中和用於非極性到高極性溶劑行體系時產生泡沫和氣泡。提高表面性能，特別是流平性，提高表面滑爽度，改善抗刮擦和耐劃傷性。
BYK®-085 BYK 毕克 含硅消泡劑和表面助劑，適用於溶劑型膠粘劑和密封劑。BYK®-085是BYK®-077的無溶劑版本，尤其適用於需要無溶劑助劑或需要特殊溶劑的體系
BYK®-088 BYK 毕克 含硅脫氣劑，推薦用於PUR基膠粘劑。也適用於環氧體系
BYK®-092 BYK 毕克 BYK®-092 is a VOC-free, silicone-containing defoamer for aqueous paint systems, printing inks and adhesives. Wide range of uses for conventional application methods
BYK®-093 BYK 毕克 高耐久性含硅消泡劑，適用於水性膠粘劑和密封劑。該消泡劑兼具高效性和廣泛的相容性
BYK®-154 BYK 毕克 基於水性乳膠的膠粘劑和密封劑用分散劑。北美市場不售賣BYK®-154，而是BYK®-156，它們的差別僅在於固含量
BYK®-1610 BYK 毕克 BYK®-1610是一種消泡劑，適用於基於乳膠的膠粘劑和密封劑
BYK®-1615 BYK 毕克 BYK®-1615是一種消泡劑，適用於基於水性乳膠的膠粘劑和密封劑
BYK®-1630 BYK 毕克 BYK®-1630 is a VOC and APEO-free mineral oil defoamer for aqueous architectural coatings, general industrial coatings, floor coatings and adhesives.
BYK-1641 BYK 毕克 BYK-1641 is a VOC- and mineral oil-free defoamer for aqueous systems that is very easy to incorporate and has an excellent price-performance ratio.
BYK-1642 BYK 毕克 BYK-1642 is a polymer-based, VOC- and silicone-free defoamer for aqueous coatings, printing inks, adhesives, paper coatings, and construction chemicals. Optimum performance at the lowest dosage.
BYK-1745 BYK 毕克 BYK-1745 is a VOC- and silicone-free defoamer based on polymers and renewable as well as sustainable raw materials for aqueous adhesives and aqueous architectural coatings.
BYK®-1760 BYK 毕克 BYK®-1760 is an emission-free silicone and polymer-containing defoamer and air release agent for solvent-borne and solvent-free coatings, adhesives, sealants and casting resins. Particularly recommended for epoxy resin systems.
BYK®-1789 BYK 毕克 BYK®-1789 is a solvent-free, silicone-containing defoamer for aqueous, high build and fast-drying coating systems and adhesives. For improving air release and effectively preventing microfoam.
BYK®-3400 BYK 毕克 BYK®-3400是一種含硅表面助劑，適用於水性膠粘劑和密封劑。它可以降低表面張力，從而改善基材潤濕性
BYK®-3410 BYK 毕克 BYK®-3410是一種無硅表面助劑，適用於水性膠粘劑和密封劑。它可以降低表面張力，從而改善基材潤濕性
BYK®-345 BYK 毕克 用於水性體系的硅樹脂表面活性劑。顯著降低表面張力，因而具有出色的基材滑爽性和流平性。是無溶劑型的BYK® 346。無泡沫穩定性，不會提高表面滑爽性或削弱再涂性。
BYK®-346 BYK 毕克 用於水性體系的硅樹脂表面活性劑。是提高水性體系的基材潤濕性的標准添加劑。用於含3-7%共溶劑的體系中時具有最適宜的效率。顯著降低表面張力。
BYK®-347 BYK 毕克 用於水性體系的硅樹脂表面活性劑。顯著降低表面張力，因而具有出色的基材滑爽性和流平性。不會提高表面滑爽性或削弱再涂性。
BYK®-348 BYK 毕克 用於水性體系的硅樹脂表面活性劑。顯著降低表面張力，因而具有良好的基材滑爽性和流平性。無泡沫穩定性，不會提高表面滑爽性或削弱再涂性。適合用於無溶劑型水性配方。
BYK®-349 BYK 毕克 BYK®-349是一種用於水性體系的硅樹脂表面活性劑。BYK®-349特別適合基於丙烯酸、苯丙、丙烯酸 PU組合、可交聯聚氨酯和烘干體系的各種水性配方。
BYK®-3764 BYK 毕克 BYK®-3764 is a solvent-free silicone surface additive for aqueous, solvent-borne and solvent-free coatings and adhesives to increase surface slip and to greatly reduce surface tension. Minor foam stabilization and low dosage.
BYK®-3771 BYK 毕克 BYK®-3771 is a silicone surface additive for solvent-free, radiation-curable, and solvent-borne coatings, adhesives, and printing inks with a strong reduction in the surface tension. OH-functional and solvent-free.
BYK®-4509 BYK 毕克 BYK-4509 is an adhesion promoter for solvent-borne and aqueous systems applied to metallic substrates. It is compatible with most binders and is therefore ideal for universal use. This product is a salt of a polymer with acidic groups.
BYK®-4512 BYK 毕克 BYK®-4512 is an adhesion promoter for solvent-borne systems applied to metal substrates. It is particularly well-suited for use in chromate-free primers and on metal substrates that are pre-treated in a chromate-free manner.
BYK®-9076 BYK 毕克 BYK®-9076是一種高分子量助劑，適用於無溶劑膠粘劑和密封劑，BYK®-9076尤其適用於酸性和中性炭黑的穩定
BYK®-9077 BYK 毕克 用於無溶劑型濃縮顏料的新型高分子添加劑，用來穩定基本型碳黑。低黏度、高顏料承載量﹔在羥基官能聚醚/增塑劑等無溶劑型載體中穩定。
BYK®-A 530 BYK 毕克 脫氣劑和消泡劑，適合溶劑型和無溶劑環氧體系
BYK®-A 535 BYK 毕克 無硅消泡劑/脫氣劑，適用於無溶劑和溶劑型環氧和PUR基膠粘劑和密封劑
BYK®-A 550 BYK 毕克 BYK®-A 550具有強脫氣效果，卻不會導致強霧影效果
BYK®-A 555 BYK 毕克 BYK®-A 555應用於各種膠粘劑具有最高效率
BYK®-DYNWET 800 BYK 毕克 BYK®-DYNWET 800是一種無硅表面助劑，適用於水性膠粘劑和密封劑。它可降低快速施工過程中的動態表面張力，從而改善基材潤濕性
BYK-P 2710 BYK 毕克 BYK-P 2710 is a processing additive for solvent-free and solvent-borne epoxy resins for the adjustment of rheological properties of 2-K systems in combination with hydrophilic fumed silica (Thixbreaker).
BYK-P 2720 BYK 毕克 BYK-P 2720 is a rheology additive for solvent-free and solvent-borne amine hardeners to enhance the rheological properties of two-component systems in combination with hydrophilic fumed silica (Thixbooster).
BYK®-W 940 BYK 毕克 BYK®-W 940可阻止礦物填料例如碳酸鈣和三氫氧化鋁的沉降，並減少無機和有機顏料的浮色和發花
BYK®-W 961 BYK 毕克 BYK®-W 961可作為潤濕和分散劑，阻止礦物填料沉降
BYK®-W 966 BYK 毕克 BYK®-W 966可增加聚酯樹脂體系中各種最常用填料例如碳酸鈣和三氫氧化鋁的分散。它可降低粘度，從而使更高顏填料負載量成為可能，它還可防止沉降
BYK®-W 969 BYK 毕克 BYK®-W 969可作為膠粘劑和密封劑的潤濕和分散劑，並降低其粘度
BYK®-W 980 BYK 毕克 BYK®-W 980可增加各種最常用填料例如碳酸鈣和三氫氧化鋁的分散。它可降低粘度，從而使更高顏填料負載量成為可能，它還可防止沉降
BYK®-W 985 BYK 毕克 BYK®-W 985可增加最常用填料例如碳酸鈣和三氫氧化鋁的潤濕和分散速度。它可極大地降低粘度，從而使更高顏填料負載量成為可能。BYK®-W 985通常不起防沉降作用
BYKANOL-A BYK 毕克 BYKANOL-A is an anti-gelling additive for solvent-borne coatings to prevent increased viscosity in air-drying and baking coatings, gelling in long-term storage, and skin formation in oxidative-drying systems. Suitable for post addition.
BYKJET-9171 BYK 毕克 BYKJET-9171 is a solvent-free wetting and dispersing additive for aqueous inkjet inks.It is particularly suitable for stabilizing organic pigments and disperse dyes. It greatly reduces the viscosity of the mill base, which enables a higher pigment content...展開 BYKJET-9171 is a solvent-free wetting and dispersing additive for aqueous inkjet inks.It is particularly suitable for stabilizing organic pigments and disperse dyes. It greatly reduces the viscosity of the mill base, which enables a higher pigment content in pigment concentrates. It is particularly recommended for binder-free grinding. 收起
CLAYTONE 34 BYK 毕克 CLAYTONE 34 is a modified montmorillonite designed for use in aliphatic systems containing aromatic solvent or aromatic-aliphatic solvent blends which display moderate polarity. It demonstrates high gelling efficiency, reproducible viscosity and thixotrop...展開 CLAYTONE 34 is a modified montmorillonite designed for use in aliphatic systems containing aromatic solvent or aromatic-aliphatic solvent blends which display moderate polarity. It demonstrates high gelling efficiency, reproducible viscosity and thixotropic development, a high degree of sag control and prevents hard settling of pigments and fillers. CLAYTONE 34 has proven to be a reliable and reproducible rheological additive for use in oil based paints, stains, alkyd enamels and primers, and epoxy systems. 收起
CLAYTONE® 40 BYK 毕克 Claytone® 40是一種親有機膨潤土衍生物，用作觸變增稠劑和抗沉降劑，用於低到中等極性溶劑型塗料。這是一個傳統的有機粘土，需要添加活化劑以獲取充分的效能。作為親有機的蒙脫石產品，它可以在有機介質中溶脹，並建立一種凝膠結構（紙房狀構造）。單蒙脫石片層之間的弱氫鍵是此觸變凝膠結構的原因。為了獲取最佳效率，片層的完全分離是必要的（附聚物解聚成初級粒子完全分散）。
CLAYTONE® AF BYK 毕克 Claytone® AF是一種改性蒙脫石，用於含低到中等極性的脂肪族溶劑和脂肪族 - 芳香族溶劑混合物的體系。Claytone®產生可重複的黏度和觸變控制，高程度流掛控制，並防止顏料沉降。Claytone® AF是自分散的，不需要極性活化劑。Claytone® AF無需高剪切力或預凝膠。
CLAYTONE® APA BYK 毕克 Claytone® APA是一種改性蒙脫石，用於含中等到高極性的芳香族溶劑或芳香族氧化物溶劑混合物的體系。Claytone® APA具有高凝膠效率、可重複的黏度和觸變控制，高程度流掛控制，並防止顏料和填料沉降。
CLAYTONE® HT BYK 毕克 Claytone® HT是一種改性蒙脫石，用於含低到中等極性的芳香族溶劑和脂肪族溶劑的體系。Claytone® HT具有高凝膠效率、可重複的黏度和觸變控制，高程度流掛控制，並防止顏料和填料沉降。本產品是一種高性能的流變助劑，用於在高性能的油性塗料，特別適合於工業、船舶和防護塗料。
CLAYTONE® HY BYK 毕克 Claytone® HY是一種改性蒙脫石，用於低到中等極性的印刷油墨。Claytone® HY具有高凝膠效率、可增加黏度和屈服值，防止顏料聚集、沉降，減少起霧，並使油墨生產商可控制粘性粘度。
CLAYTONE-40 BYK 毕克 TIXOGEL® VP是一個觸變、防沉降劑，可用於低到中等極性體系。為了達到最佳的效率，TIXOGEL® VP應使用高剪切力分散。
CLAYTONE-EM BYK 毕克 CLAYTONE-EM is a high efficiency rheological additive suitable for use in synthetic base fluids and all-oil systems to increase the carrying capacity and hole cleaning capabilities. The product is also an effective suspension agent for polymer slurries.
CLAYTONE-ER BYK 毕克 CLAYTONE-ER is a high efficiency rheological additive suitable for use in mineral oil and synthetic base fluids to increase the carrying capacity and hole cleaning capabilities. The product is also an effective suspension agent for polymer slurries.
CLAYTONE-IMG 400 BYK 毕克 CLAYTONE-IMG 400 is a general purpose rheological additive for diesel and mineral oil based drilling fluids to increase the carrying capacity and hole cleaning capabilities.
CLAYTONE-MPZ BYK 毕克 TIXOGEL® MPZ是最高性能有機粘土系列產品。它是一種高效觸變增稠劑、抗沉降劑，用於中等到高極性的的系統。高極性體系中沒必要添加活化劑是一種規則，但對於中等極性體系有益。
CLAYTONE-SF BYK 毕克 CLAYTONE-SF is an ultra high efficiency rheological suitable for use in mineral oil and synthetic base fluids to increase the carrying capacity and hole cleaning capabilities. The product is also an effective suspension agent for polymer slurries.
DISPERBYK®-118 BYK 毕克 DISPERBYK®-118 is a wetting and dispersing additive for solvent-borne systems to stabilize acidic, neutral and basic titanium dioxides, colored inorganic pigments, transparent iron oxides, fillers, and effect pigments. The additive improves the wetting an...展開 DISPERBYK®-118 is a wetting and dispersing additive for solvent-borne systems to stabilize acidic, neutral and basic titanium dioxides, colored inorganic pigments, transparent iron oxides, fillers, and effect pigments. The additive improves the wetting and dispersing of all inorganic fillers such as calcium carbonate and aluminum hydroxide (ATH). DISPERBYK®-118 is all-purpose for titanium dioxides. The additive causes lower viscosity and enables higher filler loading. 收起
DISPERBYK-168 TF BYK 毕克 DISPERBYK-168 TF is a wetting and dispersing additive for solvent-free, radiation curable coatings, printing inks and adhesives. DISPERBYK-168 TF is the tin-free variant of DISPERBYK-168 in GPTA.
DISPERBYK®-180 BYK 毕克 水性、溶劑型和無溶劑膠粘劑和密封劑用潤濕和分散劑
DISPERBYK®-190 BYK 毕克 水性膠粘劑和密封劑用潤濕和分散劑
DISPERBYK®-191 BYK 毕克 水性膠粘劑和密封劑用潤濕和分散劑
DISPERBYK®-192 BYK 毕克 水性膠粘劑和密封劑用潤濕和分散劑
DISPERBYK®-199 BF BYK 毕克 DISPERBYK®-199 BF is a VOC-free wetting and dispersing additive for stabilizing organic and inorganic pigments in aqueous coatings, adhesives, pigment concentrates and care products. Biocide-free version of DISPERBYK-199.
DISPERBYK®-2015 BF BYK 毕克 DISPERBYK®-2015 BF is a VOC- and solvent-free wetting and dispersing additive for aqueous coatings, printing inks, adhesives and care products. For resin-free pigment concentrates. Biocide-free version of DISPERBYK-2015.
DISPERBYK®-2018 BYK 毕克 DISPERBYK®-2018 is a VOC- and solvent-free wetting and dispersing additive for aqueous paint systems, floor coatings, printing inks,inkjet inks, adhesives, and pigment concentrates.
DISPERBYK®-2152 BYK 毕克 DISPERBYK®-2152 is an emission-free, hyperbranched wetting and dispersing additive for solvent-free epoxy systems and other reactive systems. Achieving excellent deflocculation and stabilization requires an additive with highly efficient pigment-affinic g...展開 DISPERBYK®-2152 is an emission-free, hyperbranched wetting and dispersing additive for solvent-free epoxy systems and other reactive systems. Achieving excellent deflocculation and stabilization requires an additive with highly efficient pigment-affinic groups. In general, those pigment-affinic groups are aminic in nature and can react with the epoxy resins. Due to the special hyperbranched structure of DISPERBYK®-2152 the aminic pigment-affinic groups are encapsulated by polyester side chains; this prevents reaction with the epoxy resin, and, as a result, long-term storage stability is achieved. The additive contains no solvents or volatile components and fulfills the strict requirements of the German AgBB as well as French VOC standards 收起
DYHARD® 100 AlzChem DYHARD® 100 is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations...展開 DYHARD® 100 is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations and to improve handling. The products of the DYHARD® 100 series do not react with epoxy resins at moderate temperatures. Dispersed in epoxy resin the mixture remains stable until activated by heat. 收起
DYHARD® 100S AlzChem DYHARD® 100S is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomeration...展開 DYHARD® 100S is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations and to improve handling. The products of the DYHARD® 100 series do not react with epoxy resins at moderate temperatures. Dispersed in epoxy resin the mixture remains stable until activated by heat. 收起
DYHARD® 100SF AlzChem DYHARD® 100SF is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomeratio...展開 DYHARD® 100SF is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations and to improve handling. The products of the DYHARD® 100 series do not react with epoxy resins at moderate temperatures. Dispersed in epoxy resin the mixture remains stable until activated by heat. 收起
DYHARD® 100SH AlzChem DYHARD® 100SH is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomeratio...展開 DYHARD® 100SH is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations and to improve handling. The products of the DYHARD® 100 series do not react with epoxy resins at moderate temperatures. Dispersed in epoxy resin the mixture remains stable until activated by heat. 收起
DYHARD® A5M30 AlzChem DYHARD® A5M30 is widely used as a highly active but also latent accelerator master batch of DYHARD® UR500 in thermosetting epoxy resin formulations. It is especially designed for dust free work environments and easy to mix in productions
DYHARD® CAAB AlzChem DYHARD® CAAB is a curing agent for matt finish powder coatings based on epoxy or epoxy-polyester hybrid formulations. Usually it is used together with DYHARD® PIN to realize these matt finishes. For low gloss applications the optimal mixing ratio between ...展開 DYHARD® CAAB is a curing agent for matt finish powder coatings based on epoxy or epoxy-polyester hybrid formulations. Usually it is used together with DYHARD® PIN to realize these matt finishes. For low gloss applications the optimal mixing ratio between DYHARD® PIN and DYHARD® CAAB is 45:55. This ideal mixture is also available in the ready to use premix DYHARD® PMC for an easy handling. 收起
DYHARD® D50EP AlzChem DYHARD® D50EP is a master batch of 50% DYHARD® 100S in standard bisphenol A epoxy resin (EEW 182-192). Advantages include a dust-free production environment, as well as easier dosage and incorporation. It is cost-effective due to easy handling, and offers...展開 DYHARD® D50EP is a master batch of 50% DYHARD® 100S in standard bisphenol A epoxy resin (EEW 182-192). Advantages include a dust-free production environment, as well as easier dosage and incorporation. It is cost-effective due to easy handling, and offers the same reactivity, latency, and mechanical properties as the DYHARD® 100 series. This product is recommended for one-component thermosetting epoxy resin formulations for the automotive, sporting goods, and aerospace industry, for adhesives, for encapsulation compounds, and more. 收起
DYHARD® DF50EP AlzChem DYHARD® DF50EP is a master batch of 50% DYHARD® 100SF in standard bisphenol A epoxy resin (EEW 182-192). Products of the DYHARD® master batches are widely used for all kinds of one component thermosetting epoxy resin formulations
DYHARD® Fluid 111 AlzChem DYHARD® Fluid 111 is a liquid latent curing agent for thermosetting epoxy resin formulations.
DYHARD® Fluid 151 AlzChem DYHARD® Fluid 151 is part of a fully formulated latent epoxy resin system, which has been specifically designed for resin transfer molding applications.
DYHARD® Fluid 212 AlzChem DYHARD® Fluid 212 is a liquid latent curing agent. It features a long pot life in the impregnation bath, a rapid cure at 120ºC, optical clearness, and high transparency. This makes it ideal for use in filament winding applications.
DYHARD® Fluid AC11 AlzChem DYHARD® Fluid AC11 is part of a fully formulated latent epoxy resin system, which has been specifically designed for resin transfer molding applications.
DYHARD® MCA10 AlzChem DYHARD® MCA10 is a special formulated curing agent for low temperature cure, or very fast cure at standard cure temperatures. A formulated 1K-Epoxy resins system with DYHARD® MCA10 still has an acceptable long latency of a few weeks at room temperature.
DYHARD® MCA30 AlzChem DYHARD® MCA30 is a non toxic, special formulated curing agent for low temperature cure, high gloss epoxy powder coatings.
DYHARD® MI-C AlzChem DYHARD® MI-C is used as a very active but also reasonably latent accelerator in thermosetting epoxy resin formulations. It is typically used for fast curing, or low temperature cure, resin systems with low latency requirements.
DYHARD® MI-FF AlzChem DYHARD® MI-FF is used as a very active but also reasonably latent accelerator in thermosetting epoxy resin formulations. It is typically used for fast curing, or low temperature cure, resin systems with low latency requirements.
DYHARD® MIA5 AlzChem DYHARD® MIA5 is used as a very active but also reasonably latent accelerator in thermosetting epoxy resin formulations. It’s use is particularly suited in combination with micronized dicyandiamide from the DYHARD® CU-Line, or with the dicyandiamide master...展開 DYHARD® MIA5 is used as a very active but also reasonably latent accelerator in thermosetting epoxy resin formulations. It’s use is particularly suited in combination with micronized dicyandiamide from the DYHARD® CU-Line, or with the dicyandiamide master batches from the DYHARD® MB-Line. 收起
DYHARD® OTB AlzChem DYHARD® OTB represents a medium reactive curing agent for high gloss epoxy powder coatings. With it’s ideal distribution properties in epoxy resins high quality finishes at low curing temperatures are provided.
DYHARD® PI AlzChem DYHARD® PI represents an imidazole based accelerator and/or hardener for thermosetting epoxy resin systems. It has a larger particle size than DYHARD® PI-FF, which is more suitable where lower reactiviy's are needed.
DYHARD® PI-FF AlzChem DYHARD® PI-FF represents an imidazole based accelerator and/or hardener for thermosetting epoxy resin systems. DYHARD® PI-FF has a smaller particle size than DYHARD® PI and hence is more suitable where higher reactivity's are needed.
DYHARD® PIN AlzChem DYHARD® PIN represents a curing agent which is used in low gloss epoxy and epoxy-polyester hybrid powder coatings. It’s ideal distribution properties in both resin systems provides high quality finishes with a very good color stability.
DYHARD® PMC AlzChem DYHARD® PMC represents a matt curing agent for low gloss epoxy and epoxy-polyester hybrid powder coatings. With its ideal distribution properties in both resins systems, high quality finishes with a very good color stability are provided.
DYHARD® RF1000 AlzChem DYHARD® RF1000 is part of a fully formulated latent epoxy resin system, which has been specifically designed for resin transfer molding applications.
DYHARD® RF2100 AlzChem DYHARD® RF2100 is a low viscos modified bisphenol A epoxy resin. It features a long pot life in the impregnation bath, a rapid cure at 120ºC, optical clearness, and high transparency. This makes it ideal for use in filament winding applications.
DYHARD® UR200 AlzChem DYHARD® UR200 represents a latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations.