| 2-Ethylhexanoic Acid | Penpet Petrochemical Trading GmbH | 2-Ethylhexanoic Acid, in the form of a dense, clear, colourless to yellow liquid with a faint odour, is a catalyst that can be used in the dye and paint, and printing ink industry. This product is insoluble in water but is soluble in almost all conventio...展開 2-Ethylhexanoic Acid, in the form of a dense, clear, colourless to yellow liquid with a faint odour, is a catalyst that can be used in the dye and paint, and printing ink industry. This product is insoluble in water but is soluble in almost all conventional solvents. Most of its siccatives are metal salts that can be used as drying agents. 收起 | |
| Adherant ADK | Elementis 海名斯特殊化学 | Adherant ADK 为增进復合油墨对 PET 材质附着性，以及溶剂型涂料对层间密着和各种塑料、金属底材的密着性的添加剂。 | |
| Barium Sulphate BS-419 | Briture Co., Ltd. | Barium Sulphate BS-419 is a chemically synthesized barium sulfate product refined with barium salt and sodium sulfate. This product shields x-rays and y-rays, and can improve the gloss and surface hardness of products. Barium Sulphate BS-419 is used in po...展開 Barium Sulphate BS-419 is a chemically synthesized barium sulfate product refined with barium salt and sodium sulfate. This product shields x-rays and y-rays, and can improve the gloss and surface hardness of products. Barium Sulphate BS-419 is used in powder coatings and printing ink. 收起 | |
| BENATHIX® | Elementis 海名斯特殊化学 | BENATHIX® rheological additive is an extremely efficient, modified bentonite clay for solventborne unsaturated polyester paint and coating systems. This organoclay is developed to impart thixotropy and drainage control and does not require high-shear mix...展開 BENATHIX® rheological additive is an extremely efficient, modified bentonite clay for solventborne unsaturated polyester paint and coating systems. This organoclay is developed to impart thixotropy and drainage control and does not require high-shear mixing equipment unlike conventional organoclays. 收起 | |
| BENGEL® 434 | Elementis 海名斯特殊化学 | BENGEL® 434 流變助劑是一種通用型有機膨潤土，專門用於低至中極性脂肪烴及芳香烴塗料系統中。 | |
| BENGEL® 818 | Elementis 海名斯特殊化学 | 與傳統的有機黏土相比，BENGEL® 818 具有極佳的分散性、良好的搖變性、抗流掛性及防沉降性。它屬於超分散型，在生產過程中具有很大的靈活性。推薦用於氣幹型長油度醇酸瓷漆、聚氨酯打磨型封閉底漆、普通的工業維護系統和脂肪族系統中。 | |
| BENGEL® 828 | Elementis 海名斯特殊化学 | BENGEL® 828 流變助劑的超分散性可大大簡化油漆系統的配製及製造。適用於有中至高極性塗料系統，如酮類、酯類、醇酯類、醚酯類、醇類。使用BENGEL® 828給油漆生產商提供了提高生產效率的機會。 | |
| BENGEL® 958 | Elementis 海名斯特殊化学 | BENGEL® 958流变助剂是一种易分散型有机膨润土，适用于低到中极性有机溶剂体系。提供良好的抗流挂性和防沉性能。容易分散，在生产过程中可灵活操作。推荐使用在气乾型长油醇酸瓷漆、聚氨酯体系、打印油墨、密封胶和脂肪族体系中。 | |
| BENGEL® 988 | Elementis 海名斯特殊化学 | BENGEL® 988 為超分散型有機膨潤土流變助劑，可簡化油漆系統的配製及製造。本產品具有廣泛的應用，可用於中／低至高極性溶劑塗料與油墨系統。 | |
| BENTONE® 27 | Elementis 海名斯特殊化学 | BENTONE® 27 為一適用於中至高極性有機溶劑塗料系統與合成黏結劑系統的有機膨潤土添加劑。 | |
| BENTONE® 34 | Elementis 海名斯特殊化学 | BENTONE® 34 為一適用於低至中極性有機溶劑塗料系統的有機膨潤土添加劑。 | |
| BENTONE SD® -1 | Elementis 海名斯特殊化学 | BENTONE SD® -1 為一適用於脂肪族及非極性到中極性有機溶劑塗料系統的有機膨潤土添加劑。 | |
| BENTONE SD® -2 | Elementis 海名斯特殊化学 | BENTONE SD® -2 為一適用於中至高極性有機溶劑塗料系統的有機膨潤土添加劑。 | |
| BM52 | Pioneer Chemicals Co., Ltd. | BM52, in the form of a powder, is a copolymer of methacrylates that is a kind of alcohol solubility resin and can be dissolved by ethanol and other weak solvents. It has low odor, high purity, and offers better hardness and pigment dispersion, and holds ...展開 BM52, in the form of a powder, is a copolymer of methacrylates that is a kind of alcohol solubility resin and can be dissolved by ethanol and other weak solvents. It has low odor, high purity, and offers better hardness and pigment dispersion, and holds admirable adhesion on almost all nylons (PA) and metals. BM52 is widely used in coatings on special substrates, alcohol soluble inks, and eco-friendly coatings with a molecular weight of 70,000 g/mol, moisture content of equal to or less than 1.0%, and an inherent viscosity of 0.51 to 55. 收起 | |
| BM61 | Pioneer Chemicals Co., Ltd. | BM61, in the form of a pellet, is a copolymer of methacrylates that offers performance on good durability, adhesion, low shrinkage, and good flexibility. It can be dissolved in numerous organic solvents such as chlorinated solvents, high alcohol, aromatic...展開 BM61, in the form of a pellet, is a copolymer of methacrylates that offers performance on good durability, adhesion, low shrinkage, and good flexibility. It can be dissolved in numerous organic solvents such as chlorinated solvents, high alcohol, aromatic hydrocarbons, ketones, esters. It has good compatibility with cellulose acetate, NC, vinyl resin, and it is commonly used in UV ink formulation (OPP/BOPP film) as inert resin to reduce shrinkage and to enhance adhesion. BM61 is also broadly used in eco-friendly correction fluid, aluminum heat sealing lacquer, cardboard ink, and more. It has a molecular weight of 50,000 g/mol, moisture content of equal to or less than 0.5%, acid value of equal to or less than 6.5 mgKOH/g, and an inherent viscosity of 0.20 to 0.26. 收起 | |
| BM61A | Pioneer Chemicals Co., Ltd. | BM61A, in the form of a pellet, is a copolymer of methacrylates that offers performance on good durability, adhesion, low shrinkage, and good flexibility. It can be dissolved in numerous organic solvents such as chlorinated solvents, high alcohol, aromati...展開 BM61A, in the form of a pellet, is a copolymer of methacrylates that offers performance on good durability, adhesion, low shrinkage, and good flexibility. It can be dissolved in numerous organic solvents such as chlorinated solvents, high alcohol, aromatic hydrocarbons, ketones, esters. It has good compatibility with cellulose acetate, NC, vinyl resin, plasticizer, and it is commonly used in UV ink formulation (OPP/BOPP film) as inert resin to reduce shrinkage and to enhance adhesion. BM61A is also broadly used in gravure inks, aluminum heat sealing lacquer, cardboard ink, and more. It has a molecular weight of 50,000 g/mol, moisture content of equal to or less than 0.5%, and an inherent viscosity of 0.20 to 0.26. 收起 | |
| BM70 | Pioneer Chemicals Co., Ltd. | BM70, in the form of a pellet, is a copolymer of methyl methacrylate and methacrylic acid that is soluble in polar organic solvents such as ketones and esters and can be dissolved in esters (or ketones) for alcohol soluble inks and mixed solvent like abso...展開 BM70, in the form of a pellet, is a copolymer of methyl methacrylate and methacrylic acid that is soluble in polar organic solvents such as ketones and esters and can be dissolved in esters (or ketones) for alcohol soluble inks and mixed solvent like absolute ethyl alcohol. It offers good adhesion on glass, metal, plastic, and is broadly used in glass inks, metal coatings, and more. BM70 has a molecular weight of 40,000 g/mol, moisture content of equal to or less than 1.0%, acid value of equal to or less than 70 mgKOH/g, and an inherent viscosity of 65.0 to 70.0. 收起 | |
| Chlorinated Polypropylene Granular Form | Briture Co., Ltd. | Chlorinated Polypropylene Granular Form is a white or pale yellow granular chlorinated polypropylene adhesive agent that is completely soluble in toluene and xylene. This product has good fluidity and good weather, thermal aging, oil, ozone, chemical and ...展開 Chlorinated Polypropylene Granular Form is a white or pale yellow granular chlorinated polypropylene adhesive agent that is completely soluble in toluene and xylene. This product has good fluidity and good weather, thermal aging, oil, ozone, chemical and fire resistance. Chlorinated Polypropylene Granular Form is used in composite printing inks, coating film, and plastics paint. 收起 | |
| DAPRO® ACP-16W | Elementis 海名斯特殊化学 | DAPRO® ACP-16W 為水性密著增進劑，設計用於用增進水性塗料與油墨在聚丙烯（PP）材質上的密著效果。 | |
| DAPRO® AP 1622 | Elementis 海名斯特殊化学 | DAPRO® AP 1622 為溶劑系統使用的矽酮改質液態泡沫抑制劑。在不同系統中，具有顯著的消泡性能。具有易於添加在各式溶劑塗料油墨的方便使用特點。 | |
| DAPRO® AP 7015 | Elementis 海名斯特殊化学 | DAPRO® AP 7015 為一具有良好乳化性能的水性消泡劑，具有優異的消泡、抑泡效果。 | |
| DAPRO® AP 7072 | Elementis 海名斯特殊化学 | DAPRO® AP 7072 高效適合用於高品質橡膠應用，且提供極佳的泡沫抑制和消泡性能。DAPRO® AP 7072 在水中極易分散。適用於建築塗料、黏合劑、乳液製備和水墨等水性系統。 | |
| DAPRO® BEZ 75 | Elementis 海名斯特殊化学 | DAPRO® BEZ 75 是用於非水性塗料的高效能添加劑，具有極佳抗沉降與抗垂流效能，特別適用於不含芳香族的塗料配方。 | |
| DAPRO® DF 1760 | Elementis 海名斯特殊化学 | DAPRO® DF 1760 是一高效能且不含有機矽長效型消泡劑。即使塗料長期存放後使用，仍可維持其有效的消泡性能。DAPRO® DF 1760 所含的所有非揮發性成分皆符合美國聯邦法規的藥物暨食品管理（FDA）CFR 21 175.105；175.300；176.170 與 176.180 條款的規定。 | |
| DAPRO® DF 677 | Elementis 海名斯特殊化学 | DAPRO® DF 677 is a high performance defoamer. It is recommended for aqueous inks. | |
| DAPRO® DF 690 | Elementis 海名斯特殊化学 | DAPRO® DF 690 is an antifoaming agent for a grinding stage or high shear stage with excellent destabilizing effect on foaming and microbubbles. It exhibits excellent durability without affecting system gloss and color rendering. | |
| DAPRO® DF 7015 | Elementis 海名斯特殊化学 | DAPRO® DF 7015是一具有良好乳化性能的水性消泡剂。特别推荐用于研磨浆料、乳胶漆和油墨 | |
| DAPRO® UW 461 | Elementis 海名斯特殊化学 | DAPRO® UW 46 is a high molecular weight modified silicone that delivers slip, mar-resistance and anti-blocking performance in water borne and high polarity systems. | |
| DAPRO® W-77 | Elementis 海名斯特殊化学 | DAPRO® W-77 表面張力調整劑可作為高表面張力與低表面張力介面間的緩衝介質，無論是用於塗層與塗層之間或是塗層與基材之間。其可有效消除或減少塗膜缺陷如：表面塗布不均、魚眼、縮孔等。DAPRO® W-77 亦可促進塗料在難以潤濕或受污染的基材表面上的均勻塗布，並提供極佳的重塗性。DAPRO® W-77 不含烷基酚乙氧基化合物與有機矽，其非揮發性成分符合美國聯邦法規之藥物暨食品管理（FDA）之 CFR 21 175.300 條款的規定。 | |
| Defom 5800F | Elementis 海名斯特殊化学 | Defom 5800F 為不含芳香族的溶劑型消泡劑，符合環保規定，廣泛用於溶劑型塗料系統。 | |
| Defom 6800 | Elementis 海名斯特殊化学 | Defom 6800 為適用於高固成份、高膜厚環氧地板塗料及絲網油墨抑泡、消泡劑。 | |
| Defom W-0506 | Elementis 海名斯特殊化学 | Defom W-0506 为一以乳化聚硅氧烷为主要成份的消泡剂产品。广泛用于水性体系的抑泡、消泡。 | |
| Defom W-082 | Elementis 海名斯特殊化学 | Defom W-082 为含疏水性粒子的矿物油系消泡剂。可提供优异的抑泡、消泡效果。 | |
| Defom W-086 | Elementis 海名斯特殊化学 | Defom W-086 is a mineral oil-based defoamer which contains hydrophobic particles. It provides excellent foam suppression and anti-foaming effect. | |
| DeuAdd MA-95 | Elementis 海名斯特殊化学 | DeuAdd MA-95 为低气味多功能胺中和剂，兼具酸硷值调节和稳定﹑促进漆膜光泽展现﹑提高罐内防腐蚀性能等。 | |
| DeuRheo 201 | Elementis 海名斯特殊化学 | DeuRheo 201 為一分散的聚乙烯蠟漿，添加時取用方便且易於分散的防沉劑。 | |
| DeuRheo 201P | Elementis 海名斯特殊化学 | DeuRheo 201P 为一分散的聚乙烯蜡浆，添加时取用方便且易于分散的防沉剂。 | |
| DeuRheo 229 | Elementis 海名斯特殊化学 | DeuRheo 229 为一预先分散在溶剂中的聚 胺蜡，能够提供颜填料在涂料体系中的防沉性，以及防流挂效果。 | |
| DeuRheo WT-102 | Elementis 海名斯特殊化学 | DeuRheo WT-102 為一締合型聚胺酯增稠劑，提供增稠、觸變等效能。 | |
| DeuRheo WT-105A | Elementis 海名斯特殊化学 | DeuRheo WT-105A 為一 締合型聚胺酯增稠劑，提供水性系統增稠、流動等效能。 | |
| DeuRheo WT-108 | Elementis 海名斯特殊化学 | DeuRheo WT-108 is a non-ionic associative thickener (NiSAT) suitable for use in aqueous systems. It provides medium shear viscosity and is compatible with fluidity. This product is designed to be free of tin, APEO and organic solvents. | |
| DeuRheo WT-108F | Elementis 海名斯特殊化学 | DeuRheo WT-108F 為非離子締合型增稠劑(NiSAT)適用於水性系統的應用，可提供中剪切黏度並兼顧流動性，本產品設計不含錫、APEO與有機溶劑。 | |
| Disponer 904S | Elementis 海名斯特殊化学 | Disponer 904S 為特殊酸與矽酮混合的潤濕、分散劑，對防止二氧化鈦和其他顏料配用所產生的分色、浮色特具效果；並可避免產生沉積硬結。 | |
| Disponer 912 | Elementis 海名斯特殊化学 | Disponer 912 具有优异的颜料润湿分散性，可适用于溶剂型涂料及油墨中无机颜料及膨润土的润湿、分散，特别推荐使用于木器底漆中，以增进对木材导管的润湿性。 | |
| Disponer 929 | Elementis 海名斯特殊化学 | Disponer 929 是針對碳黑而發展出來的分散、展色劑，可添加在塗料內研磨；作為研磨展色劑，單獨與碳黑混合研磨分散，作成調色或著色用黑色漿。 | |
| Disponer 983 | Elementis 海名斯特殊化学 | Disponer 983 為高分子型分散劑，適用於溶劑型中極性系統碳黑及有機顏料的分散。 | |
| Disponer W-920 | Elementis 海名斯特殊化学 | Disponer W-920是一種獨特的分散助劑，可用於有機顏料、鐵氧化物顏料在水性體系中的分散 | |
| DMAE | Elementis 海名斯特殊化学 | DMAE 為一高效的胺中和劑。可作為 pH 值調整、穩定及輔助溶劑等效能。 | |
| Epoxidized Soybean Oil (ESBO) | Penpet Petrochemical Trading GmbH | Epoxidized Soybean Oil (ESBO), in the form of a light yellow, thick, oily liquid, is a plasticizer than can be used in oil paints, adhesives, and printing inks. This product is derived from soybean oil through the reaction of unsaturated compounds with p...展開 Epoxidized Soybean Oil (ESBO), in the form of a light yellow, thick, oily liquid, is a plasticizer than can be used in oil paints, adhesives, and printing inks. This product is derived from soybean oil through the reaction of unsaturated compounds with peracids. Its boiling point is 150°C with an ignition point at 310°C. 收起 | |
| Hypomer FX-2052 | Elementis 海名斯特殊化学 | 乾燥速度快、塑膠密著性佳、耐候性佳、對乙丁纖維素相容性佳、可用於自乾塗料 | |
| Isophorone | Penpet Petrochemical Trading GmbH | Isophorone, in the form of a clear fluid having a peppermint odour, is an industrial solvent in the coatings, inks, and adhesive industries. This product can be used in synthesis for the production of isophorone diamine, isophorone diisocyanate and 3,5-d...展開 Isophorone, in the form of a clear fluid having a peppermint odour, is an industrial solvent in the coatings, inks, and adhesive industries. This product can be used in synthesis for the production of isophorone diamine, isophorone diisocyanate and 3,5-dimethylphenol. 收起 | |
| Isopropanol | Penpet Petrochemical Trading GmbH | Isopropanol, in the form of a colourless, clear liquid, is a highly concentrated alcohol that can be used as a solvent for adhesives, paints, and inks. This product is often used as a substitute for ethanol. It is often a constituent of disinfectant sol...展開 Isopropanol, in the form of a colourless, clear liquid, is a highly concentrated alcohol that can be used as a solvent for adhesives, paints, and inks. This product is often used as a substitute for ethanol. It is often a constituent of disinfectant solutions because it can quickly and easily clean surfaces, and evaporates without leaving a residue. 收起 | |
| Levaslip 435 | Elementis 海名斯特殊化学 | Levaslip 435 為適用於溶劑型系統的流平劑。 | |
| Levaslip W-461 | Elementis 海名斯特殊化学 | Levaslip W-461 為適用於水性及高極性溶劑系統的平滑、耐摩擦、抗刮傷、防止貼合助劑。 | |
| Levelol 839 | Elementis 海名斯特殊化学 | Levelol 839 為不含芳香烴氟改質聚丙烯酸酯可重塗流平劑，可提供優異流平性與底材潤濕性。 | |
| Levelol W-469 | Elementis 海名斯特殊化学 | Levelol W-469 为硅酮类底材润湿剂，适用于水性体系。 | |
| MB-10 | Pioneer Chemicals Co., Ltd. | MB-10, in the form of a bead, is the homopolymer of BMA that offers good adhesion and flexibility and is easily soluble in various organic solvents such as aromatic hydrocarbons, esters, ketones, and long-chain fatty alcohol. It has good compatibility wit...展開 MB-10, in the form of a bead, is the homopolymer of BMA that offers good adhesion and flexibility and is easily soluble in various organic solvents such as aromatic hydrocarbons, esters, ketones, and long-chain fatty alcohol. It has good compatibility with other film forming resins such as vinyl resin, NC, and chlorinated rubber. MB-10 is mainly used in containers and packaging, functional coatings and inks, inks for PET coated films and papers, especially suitable for aluminum substrate coatings and inks for lithographic heat transfers. It has a molecular weight of 180,000 g/mol, moisture content of equal to or less than 1.0%, acid value of equal to or less than 9.0 mgKOH/g, and an inherent viscosity of 0.47 to 0.56. 收起 | |
| MB-2 | Pioneer Chemicals Co., Ltd. | MB-2, in the form of a bead, is a copolymer of Methacrylates and Styrene with enough hardness, offers high gloss, good gasoline resistance, abrasion resistance, humidity and heat resistance, and good solvent release ability. It is easily soluble in sever...展開 MB-2, in the form of a bead, is a copolymer of Methacrylates and Styrene with enough hardness, offers high gloss, good gasoline resistance, abrasion resistance, humidity and heat resistance, and good solvent release ability. It is easily soluble in several organic solvents including esters, chlorinated solvents ketones, aromatic hydrocarbons, and it has good compatibility with other film forming resins such as plasticizers, vinyl resin and NC. MB-2 is broadly used in PVC printing inks, masonry coatings, PVC processing, upholstery, floor coatings, gravure inks, PVC top coatings, and road marking. It has a molecular weight of 140,000 g/mol, moisture content of equal to or less than 1.0%, acid value of equal to or less than 1.0 mgKOH/g, and an inherent viscosity of 0.62 to 0.68. 收起 | |
| MB-311 | Pioneer Chemicals Co., Ltd. | MB-311, in the form of a bead, is a copolymer of butyl methacrylate that offers good durability and weather-ability, and it also offers good flexibility, pigment dispersion, better flow-ability, and high gloss due to its low molecular weight of 30,000 g/m...展開 MB-311, in the form of a bead, is a copolymer of butyl methacrylate that offers good durability and weather-ability, and it also offers good flexibility, pigment dispersion, better flow-ability, and high gloss due to its low molecular weight of 30,000 g/mol. It is easily soluble in long-chain alcohol, esters, ketones, aromatic hydrocarbons, and chlorinated solvent. MB-311 is normally used in varnish coatings, ceramic inks, and top coatings. It has a moisture content of equal to or less than 1.0%, acid value of equal to or less than 1.0 mgKOH/g, and an inherent viscosity of 0.13 to 0.17. 收起 | |
| MB-6 | Pioneer Chemicals Co., Ltd. | MB-6, in the form of a bead, is a copolymer of methyl methacrylate and butyl methacrylate, as a multi-usage acrylic resin, it offers excellent performance on chemical resistance, weather ability, and durability. It is easily soluble in several organic sol...展開 MB-6, in the form of a bead, is a copolymer of methyl methacrylate and butyl methacrylate, as a multi-usage acrylic resin, it offers excellent performance on chemical resistance, weather ability, and durability. It is easily soluble in several organic solvents including chlorinated solvents, ketones, aromatic hydrocarbons, esters, and it can solely be dissolved by high alcohols. With good solvent release ability, it also has excellent compatibility with other film forming resins, for instance chlorinated rubber, plasticizer, vinyl resins, and NC. MB-6 is broadly used in screen printing inks, container coatings, marine paints, masonry coatings, general purpose coatings, concrete coatings, external wall coatings, general purpose printing inks, concrete sealants, and road marker paints. It has a molecular weight of 50,000 g/mol, moisture content of equal to or less than 1.0%, acid value of equal to or less than 3.5 mgKOH/g, and an inherent viscosity of 0.23 to 0.30. 收起 | |
| MB-8 | Pioneer Chemicals Co., Ltd. | MB-8, in the form of a bead, is a copolymer of methyl methacrylate that has good performance on durability, alcohol resistance, chemical resistance, arrangement of aluminum powders, and plasticizer migration resistance. It is easily soluble in several org...展開 MB-8, in the form of a bead, is a copolymer of methyl methacrylate that has good performance on durability, alcohol resistance, chemical resistance, arrangement of aluminum powders, and plasticizer migration resistance. It is easily soluble in several organic solvents including ketones, aromatic hydrocarbons, esters, and has good compatibility with plasticizers, NC, CAB, and vinyl resin. MB-8 is broadly applied in leather treating agent, gilding material coatings, plastic coatings, printing inks, and PVC printing inks and coatings. It has a molecular weight of 90,000 g/mol, moisture content of equal to or less than 1.0%, acid value of equal to or less than 7.0 mgKOH/g, and an inherent viscosity of 0.37 to 0.43. 收起 | |
| MB-9 | Pioneer Chemicals Co., Ltd. | MB-9, in the form of a bead, is a homopolymer of i-butyl methacrylate and is easily soluble in chlorinated solution, aromatics, ketones, and esters. It is very compatible with chlorinated rubber, cellulose resin, and vinyl resin. MB-9 is an acrylic resin ...展開 MB-9, in the form of a bead, is a homopolymer of i-butyl methacrylate and is easily soluble in chlorinated solution, aromatics, ketones, and esters. It is very compatible with chlorinated rubber, cellulose resin, and vinyl resin. MB-9 is an acrylic resin with admirable durability, gloss, hardness, and heat resistance for use in adhesives, road marking, construction coatings, road coatings, miscellaneous ink, aerosol lacquers, plastic coating, ceramic coating, metal coatings, printing inks, and wood finishes. It has a molecular weight of 200,000 g/mol, moisture content of equal to or less than 1.0%, acid value of equal to or less than 7.0 mgKOH/g, and an inherent viscosity of 0.53 to 0.59. 收起 | |
| NUOSPERSE® FA 196 | Elementis 海名斯特殊化学 | NUOSPERSE® FA 196 應用於有機溶劑系統的高度濃縮液體顏料分散劑。特別適用於碳黑的分散劑、熱塑性丙烯酸系統的分散劑及作為促進通用色漿在基礎醇酸塗料中進行分散的助劑。 | |
| NUOSPERSE® FX 365 | Elementis 海名斯特殊化学 | NUOSPERSE® FX 365 用於水性系統的非離子型潤濕分散劑。具有優異的顏料潤濕與穩定性能。 | |
| NUOSPERSE® FX 600 | Elementis 海名斯特殊化学 | NUOSPERSE® FX 600 為一高效水性顏料分散劑，可用於工業塗料、防護塗料、高光乳膠漆、色漿與印刷油墨。是一種液態多功能聚合物且不含有機溶劑。 | |
| NUOSPERSE® FX 7500W | Elementis 海名斯特殊化学 | NUOSPERSE® FX 7500W 為水性塗料及水性墨水用之潤濕分散劑。具有優異的降黏效果，同時能提高有機及無機顏料的展色力。 | |
| NUOSPERSE® FX 9200 | Elementis 海名斯特殊化学 | NUOSPERSE® FX 9200 適用於溶劑型與無溶劑型的油墨系統，對於有機顏料與碳黑具有良好的潤濕與分散效果。 | |
| NUOSPERSE® FX 9200UV | Elementis 海名斯特殊化学 | NUOSPERSE® FX 9200UV 適用於溶劑型與無溶劑型(UV)的油墨系統，對於有機顏料與碳黑具有良好的潤濕與分散效果。 | |
| NUOSPERSE® W-22 | Elementis 海名斯特殊化学 | NUOSPERSE® W-22为一高效水性颜料润湿分散剂，可稳定颜料分散，且避免结块与粘度改变。 | |
| NUOSPERSE® W-30 | Elementis 海名斯特殊化学 | NUOSPERSE® W-30为一对环境无害的分散剂(APE - Free)，可提供各种颜料的展色性与提高产能，对于水性涂料体系的颜料分散有理想的效果，可稳定分散避免结块。 NUOSPERSE® W-30不会造成气泡生成或降低光泽度，也不影响乾燥时间、阻值或涂模硬度。在高光泽度涂料中，改善分散性的同时，可提高光泽度与鲜映性。 | |
| PChem® BM11 | Pioneer Chemicals Co., Ltd. | PChem® BM11, in the form of a powder, is a copolymer of acrylate and methacrylate that offers good durability, heat resistance, good chemical resistances to gasoline, alcohol, and blocks the migration of plasticizer contained in the vinyl resins. PChem® B...展開 PChem® BM11, in the form of a powder, is a copolymer of acrylate and methacrylate that offers good durability, heat resistance, good chemical resistances to gasoline, alcohol, and blocks the migration of plasticizer contained in the vinyl resins. PChem® BM11 is compatible with many nitrocellulose and solvents and is commonly used in applications of coating for toys, marine coating, plastic coating, gravure inks, silk screen printing inks, printing inks for soft PVC, and leather finishes. It has a molecular weight of 85,000 g/mol, moisture content of equal to or less than 0.5%, acid value of equal to or less than 2.0 mgKOH/g, and an inherent viscosity of 0.36. 收起 | |
| PChem® BM111 | Pioneer Chemicals Co., Ltd. | PChem® BM111, in the form of a powder, is a copolymer of acrylate and methacrylate that offers good durability, heat resistance, gasoline, chemical resistances to alcohol, and blocks the migration of plasticizer contained in the vinyl resins. It can be di...展開 PChem® BM111, in the form of a powder, is a copolymer of acrylate and methacrylate that offers good durability, heat resistance, gasoline, chemical resistances to alcohol, and blocks the migration of plasticizer contained in the vinyl resins. It can be dissolved into methyl methacrylate monomer and other ingredients to form a prepolymer syrup for casting applications and is compatible with many nitrocellulose and solvents and commonly used in applications of silk screen printing inks, plastic coating, marine coating. PChem® BM111 has a molecular weight of 110,000 g/mol, moisture content of equal to or less than 0.5%, acid value of equal to or less than 2.0 mgKOH/g, and an inherent viscosity of 0.48. 收起 | |
| PChem® BM112A | Pioneer Chemicals Co., Ltd. | PChem® BM112A, in the form of a pellet, is a copolymer of n-butyl methacrylate and methyl methacrylate that offers high flexibility, adhesion, durability, and low shrinkage rate. It is compatible with numerous nitrocellulose and solvents and is generally ...展開 PChem® BM112A, in the form of a pellet, is a copolymer of n-butyl methacrylate and methyl methacrylate that offers high flexibility, adhesion, durability, and low shrinkage rate. It is compatible with numerous nitrocellulose and solvents and is generally used in applications of aluminum sealer, paper printing, and UV curing technology. PChem® BM112A has a molecular weight of 70,000 g/mol, moisture content of equal to or less than 0.5%, acid value of equal to or less than 1.0 mgKOH/g, and an inherent viscosity of 0.24. 收起 | |
| PChem® BM131 | Pioneer Chemicals Co., Ltd. | PChem® BM131, in the form of a powder, is a copolymer of acrylate and methacrylate that offers good durability and heat resistance. It also offers good gasoline, chemical resistances to alcohol, and blocks the migration of plasticizer contained in the vin...展開 PChem® BM131, in the form of a powder, is a copolymer of acrylate and methacrylate that offers good durability and heat resistance. It also offers good gasoline, chemical resistances to alcohol, and blocks the migration of plasticizer contained in the vinyl resins. PChem® BM131 is compatible with many nitrocellulose and solvents and commonly used in applications of silk screen printing inks. marine coating, plastic coating, gravure inks, and good for flexographic inks. It has a molecular weight of 84,000 g/mol, moisture content of equal to or less than 0.5%, acid value of equal to or less than 1.0 mgKOH/g, and an inherent viscosity of 0.40. 收起 | |
| PChem® BM164 | Pioneer Chemicals Co., Ltd. | PChem® BM164, in the form of a powder, is a copolymer of n-butyl methacrylate and methyl methacrylate that offers durability and hard heat resistance. It is compatible with numerous nitrocellulose and solvents and commonly used in applications of sealer, ...展開 PChem® BM164, in the form of a powder, is a copolymer of n-butyl methacrylate and methyl methacrylate that offers durability and hard heat resistance. It is compatible with numerous nitrocellulose and solvents and commonly used in applications of sealer, marine coating, plastic coating, concrete cure, and is suitable for dear coating of exterior and interior concrete floors and road surface. PChem® BM164 has a molecular weight of 92,000 g/mol, moisture content of equal to or less than 0.5%, acid value of equal to or less than 3.0 mgKOH/g, and an inherent viscosity of 0.40. 收起 | |
| PChem® BM17 | Pioneer Chemicals Co., Ltd. | PChem® BM17, in the form of a powder, is a copolymer of acrylate and methacrylate that offers good durability, heat resistance, good chemical resistances to gasoline, alcohol, and blocks the migration of plasticizer contained in the vinyl resins. PChem® B...展開 PChem® BM17, in the form of a powder, is a copolymer of acrylate and methacrylate that offers good durability, heat resistance, good chemical resistances to gasoline, alcohol, and blocks the migration of plasticizer contained in the vinyl resins. PChem® BM17 is compatible with many nitrocellulose and solvents and is commonly used in applications of coating for toys, marine coating, plastic coating, gravure inks, silk screen printing inks, and inks for smoking materials. It has a molecular weight of 90,000 g/mol, moisture content of equal to or less than 0.5%, acid value of equal to or less than 1.0 mgKOH/g, and an inherent viscosity of 0.40. 收起 | |
| Pchem® BM24G | Pioneer Chemicals Co., Ltd. | Pchem® BM24G, in the form of pellets, is a copolymer of butyl methacrylate and methyl methacrylate that is soluble in chlorinated hydrocarbons, esters, glycol ethers, ketones, aromatic, and glycol ether acetates. It is compatible with a wide-ranging varie...展開 Pchem® BM24G, in the form of pellets, is a copolymer of butyl methacrylate and methyl methacrylate that is soluble in chlorinated hydrocarbons, esters, glycol ethers, ketones, aromatic, and glycol ether acetates. It is compatible with a wide-ranging variety of other resins including maleinate resins, acrylics, nitrocellulose, vinyl, and chlorinated rubber. Pchem® BM24G is a binder for manufacturer of printing inks, primers, ceramic transfer lacquers, heat sealing lacquers for aluminum foils and adhesives, and ceramic and glass transfer printing lacquers. It has a molecular weight of 180,000 g/mol, moisture content of equal to or less than 1.0%, acid value of equal to or less than 1.0 mgKOH/g, and an inherent viscosity of 0.46. 收起 | |
| PChem® BM260 | Pioneer Chemicals Co., Ltd. | PChem® BM260, in the form of a powder, is a copolymer of butyl methacrylate and methyl methacrylate that can react with polyisocyanate resins and amino to form cross-linked structures, which makes it good for 2K system coatings and printing inks. It is so...展開 PChem® BM260, in the form of a powder, is a copolymer of butyl methacrylate and methyl methacrylate that can react with polyisocyanate resins and amino to form cross-linked structures, which makes it good for 2K system coatings and printing inks. It is soluble in chlorinated hydrocarbons, esters, glycol ether acetates, ketones, aromatic, glycol ethers, and is a binder for adhesion of polystyrene and aluminum, and that is good for applications of pigmented lacquer and compatible with alkyd resins. PChem® BM260 has a molecular weight of 24,000 g/mol, moisture content of equal to or less than 1.0%, acid value of 7 mgKOH/g, and an inherent viscosity of 0.40. 收起 | |
| PChem® BM270 | Pioneer Chemicals Co., Ltd. | PChem® BM270, in the form of a pellet, is a copolymer of methyl methacrylate that has a high acid number, medium molecular weight, and excellent pigment dispersion property. It is compatible with ketone solvents, designed for photoresist ink applications,...展開 PChem® BM270, in the form of a pellet, is a copolymer of methyl methacrylate that has a high acid number, medium molecular weight, and excellent pigment dispersion property. It is compatible with ketone solvents, designed for photoresist ink applications, and is generally used in applications of cover PVC substrates, pigment dispersion, hot process stamping, and more. PChem® BM270 has a molecular weight of 60,000 g/mol, moisture content of equal to or less than 0.5%, acid value of 124 mgKOH/g, and an inherent viscosity of 0.31. 收起 | |
| PChem® BM51 | Pioneer Chemicals Co., Ltd. | PChem® BM51, in the form of a powder, is a copolymer of methyl methacrylates with alcohol soluble characteristics that offers good pigment dispersion properties and weather-ability. It is soluble in glycol ether acetates, esters, ketones, glycol ethers, a...展開 PChem® BM51, in the form of a powder, is a copolymer of methyl methacrylates with alcohol soluble characteristics that offers good pigment dispersion properties and weather-ability. It is soluble in glycol ether acetates, esters, ketones, glycol ethers, aromatic, and is compatible with a wide selection of other resins including polyesters, acrylics, vinyl, and is applicable in coatings and inks with alcohol resistance. PChem® BM51 has a molecular weight of 60,000 g/mol, moisture content of equal to or less than 1.0%, acid value of equal to or less than 6.0 mgKOH/g, and an inherent viscosity of 0.24. 收起 | |
| PChem® BM60 | Pioneer Chemicals Co., Ltd. | PChem® BM60, in the form or a powder, is a copolymer of n-butyl methacrylate and methyl methacrylate that offers good fast tack-free time, durability, hard heat resistance, good dry and wet adhesion to many plastic substrates such as polystyrene, acrylic,...展開 PChem® BM60, in the form or a powder, is a copolymer of n-butyl methacrylate and methyl methacrylate that offers good fast tack-free time, durability, hard heat resistance, good dry and wet adhesion to many plastic substrates such as polystyrene, acrylic, PVC, and ABS. It is very compatible with numerous nitrocellulose and solvents and generally used in applications of metal coatings, marine coating, plastic coating, gravure printing inks, silk screen printing inks. PChem® BM60 has a molecular weight of 40,000 g/mol, moisture content of equal to or less than 0.5%, acid value of equal to or less than 10.0 mgKOH/g, and an inherent viscosity of 0.18. 收起 | |
| PChem® BM60E | Pioneer Chemicals Co., Ltd. | PChem® BM60E, in the form or a powder, is a copolymer of n-butyl methacrylate and methyl methacrylate that offers good fast tack-free time, durability, hard heat resistance, good dry and wet adhesion to many plastic substrates such as polystyrene, acrylic...展開 PChem® BM60E, in the form or a powder, is a copolymer of n-butyl methacrylate and methyl methacrylate that offers good fast tack-free time, durability, hard heat resistance, good dry and wet adhesion to many plastic substrates such as polystyrene, acrylic, PVC, and ABS. It is very compatible with numerous nitrocellulose and solvents and generally used in applications of metal coatings, marine coating, plastic coating, gravure printing inks, silk screen printing inks. PChem® BM60 has a molecular weight of 35,000 g/mol, moisture content of equal to or less than 1.0%, acid value of 8.5 mgKOH/g, and an inherent viscosity of 0.17. 收起 | |
| PChem® BM66 | Pioneer Chemicals Co., Ltd. | PChem® BM66, in the form or a powder, is a copolymer of n-butyl methacrylate and methyl methacrylate that offers good fast tack-free time, durability, hard heat resistance, good dry and wet adhesion to many plastic substrates such as polystyrene, acrylic,...展開 PChem® BM66, in the form or a powder, is a copolymer of n-butyl methacrylate and methyl methacrylate that offers good fast tack-free time, durability, hard heat resistance, good dry and wet adhesion to many plastic substrates such as polystyrene, acrylic, PVC, and ABS. It is very compatible with numerous nitrocellulose and solvents and generally used in applications of metal coatings, concrete coatings, marine coating, plastic coating, gravure inks, silk screen printing inks. PChem® BM66 has a molecular weight of 50,000 g/mol, moisture content of equal to or less than 0.5%, acid value of equal to or less than 6.5 mgKOH/g, and an inherent viscosity of 0.27. 收起 | |
| PChem® BM66D | Pioneer Chemicals Co., Ltd. | PChem® BM66D, in the form or a powder, is a copolymer of n-butyl methacrylate and methyl methacrylate that offers good fast tack-free time, durability, hard heat resistance, good dry and wet adhesion to many plastic substrates such as polystyrene, acrylic...展開 PChem® BM66D, in the form or a powder, is a copolymer of n-butyl methacrylate and methyl methacrylate that offers good fast tack-free time, durability, hard heat resistance, good dry and wet adhesion to many plastic substrates such as polystyrene, acrylic, PVC, and ABS. It is very compatible with numerous nitrocellulose and solvents and generally used in applications of road marking, marine coating, plastic coating, PVC printing inks, gravure inks, paints for wall, and silk screen printing inks. PChem® BM66D has a molecular weight of 45,000 g/mol, moisture content of equal to or less than 0.5%, acid value of equal to or less than 6.5 mgKOH/g, and an inherent viscosity of 0.25. 收起 | |
| PChem® BM71 | Pioneer Chemicals Co., Ltd. | PChem® BM71, in the form or a powder, is a copolymer of n-butyl methacrylate and methyl methacrylate that offers good fast tack-free time, durability, hard heat resistance, good dry and good adhesion to different substrates such as polystyrene, metals, ac...展開 PChem® BM71, in the form or a powder, is a copolymer of n-butyl methacrylate and methyl methacrylate that offers good fast tack-free time, durability, hard heat resistance, good dry and good adhesion to different substrates such as polystyrene, metals, acrylic, PVC, and ABS. It is very compatible with numerous nitrocellulose and solvents and generally used in applications of heat sealer lacquer, concrete sealer, PVC replacement in automotive plastisol, road marking, plastic coating, gravure inks, and silk screen printing inks. PChem® BM71 has a molecular weight of 100,000 g/mol, moisture content of equal to or less than 0.5%, acid value of equal to or less than 3.5 mgKOH/g, and an inherent viscosity of 0.54. 收起 | |
| PChem® BM72 | Pioneer Chemicals Co., Ltd. | PChem® BM72, in the form or a powder, is a copolymer of n-butyl methacrylate and methyl methacrylate that offers good fast tack-free time, durability, hard heat resistance, good dry and good adhesion to different substrates such as polystyrene, metals, ac...展開 PChem® BM72, in the form or a powder, is a copolymer of n-butyl methacrylate and methyl methacrylate that offers good fast tack-free time, durability, hard heat resistance, good dry and good adhesion to different substrates such as polystyrene, metals, acrylic, PVC, and ABS. It is very compatible with numerous nitrocellulose and solvents and generally used in applications of heat sealer lacquer, concrete sealer, road marking, plastic coating, gravure inks, and silk screen printing inks. PChem® BM72 has a molecular weight of 32,000 g/mol, moisture content of equal to or less than 0.5%, acid value of equal to or less than 6.0 mgKOH/g, and an inherent viscosity of 0.15. 收起 | |
| PChem® BM76 | Pioneer Chemicals Co., Ltd. | PChem® BM76, in the form or a powder, is a copolymer of n-butyl methacrylate and methyl methacrylate that offers good fast tack-free time, durability, hard heat resistance, good dry and good adhesion to different substrates such as polystyrene, acrylic, P...展開 PChem® BM76, in the form or a powder, is a copolymer of n-butyl methacrylate and methyl methacrylate that offers good fast tack-free time, durability, hard heat resistance, good dry and good adhesion to different substrates such as polystyrene, acrylic, PVC, and ABS. It is very compatible with numerous nitrocellulose and solvents and generally used in applications of marine coating, concrete sealer, wood coating, plastic coating, seamless flooring, protective coatings, gravure inks, and silk screen printing inks. PChem® BM76 has a molecular weight of 105,000 g/mol, moisture content of equal to or less than 0.5%, acid value of equal to or less than 8.0 mgKOH/g, and an inherent viscosity of 0.37. 收起 | |
| PChem® BM81 | Pioneer Chemicals Co., Ltd. | PChem® BM81, in the form or a pellet, is a copolymer of n-butyl methacrylate and methyl methacrylate that offers good fast tack-free time, hard heat resistance, good dry and wet adhesion to many plastic substrates such as polystyrene, acrylic, PVC, and AB...展開 PChem® BM81, in the form or a pellet, is a copolymer of n-butyl methacrylate and methyl methacrylate that offers good fast tack-free time, hard heat resistance, good dry and wet adhesion to many plastic substrates such as polystyrene, acrylic, PVC, and ABS. It is very compatible with numerous nitrocellulose and solvents and generally used in applications of silk screen printing inks, marine coating, inks, gravure inks, and plastic coating. PChem® BM81 has a molecular weight of 30,000 g/mol, moisture content of equal to or less than 0.5%, acid value of equal to or less than 2.0 mgKOH/g, and an inherent viscosity of 0.12. 收起 | |
| PChem® BM82 | Pioneer Chemicals Co., Ltd. | PChem® BM82, in the form of a pellet, is a copolymer of n-butyl methacrylate and methyl methacrylate that offers high flexibility, adhesion, low shrinkage rate, and durability. It is compatible with numerous nitrocellulose and solvents, can be used as a b...展開 PChem® BM82, in the form of a pellet, is a copolymer of n-butyl methacrylate and methyl methacrylate that offers high flexibility, adhesion, low shrinkage rate, and durability. It is compatible with numerous nitrocellulose and solvents, can be used as a base resin for UV curing of BOPP and OPP systems, and is generally used in applications of aluminum sealer, paper printing, leather finish, metal coating, and stamping ink (adhesive layer). PChem® BM82 has a molecular weight of 90,000 g/mol, moisture content of equal to or less than 0.5%, acid value of equal to or less than 3.0 mgKOH/g, and an inherent viscosity of 0.37. 收起 | |
| PChem® BM99 | Pioneer Chemicals Co., Ltd. | PChem® BM99, in the form of a pellet, is a copolymer of methyl methacrylate that has a high heat resistance and good pigment dispersion property. It is compatible with ketone solvents and commonly used in application of inks for packaging materials and ho...展開 PChem® BM99, in the form of a pellet, is a copolymer of methyl methacrylate that has a high heat resistance and good pigment dispersion property. It is compatible with ketone solvents and commonly used in application of inks for packaging materials and hot process stamping. PChem® BM99 has a molecular weight of 20,000 g/mol, moisture content of equal to or less than 0.5%, acid value of 78 mgKOH/g. 收起 | |
| PChem® MB-10-B | Pioneer Chemicals Co., Ltd. | PChem® MB-10-B, in the form of a bead, is a copolymer of methyl methacrylate and n-butyl methacrylate that offers hard durability and heat resistance. It has good compatibility with numerous nitrocellulose and solvents and good adhesion to aluminum substr...展開 PChem® MB-10-B, in the form of a bead, is a copolymer of methyl methacrylate and n-butyl methacrylate that offers hard durability and heat resistance. It has good compatibility with numerous nitrocellulose and solvents and good adhesion to aluminum substrates. PChem® MB-10-B is commonly used in applications of inks for lithographic heat transfers, inks for PET coated films and papers, ceramic transfer printing inks, containers and packaging, aerosol paints, adhesives, coatings on aluminum foils, and packaging inks. It has a molecular weight of 160,000 g/mol, moisture content of equal to or less than 1.0%, acid value of equal to or less than 1.0 mgKOH/g, and an inherent viscosity of 0.45. 收起 | |
| PChem® MB-11 | Pioneer Chemicals Co., Ltd. | PChem® MB-11, in the form of a bead, is a copolymer of ethyl methacrylate and butyl methacrylate and is soluble in glycol ether acetates and glycol ethers, alcohols, aromatic, esters, and ketones. It is a binder for applications of gravure inks, BOPP film...展開 PChem® MB-11, in the form of a bead, is a copolymer of ethyl methacrylate and butyl methacrylate and is soluble in glycol ether acetates and glycol ethers, alcohols, aromatic, esters, and ketones. It is a binder for applications of gravure inks, BOPP film adhesions, wood finishes lacquers, plastic coating, flexographic inks, and resin for printing ink. PChem® MB-11 has a molecular weight of 50,000 g/mol, moisture content of equal to or less than 1.0%, acid value less than 6.0 mgKOH/g, and an inherent viscosity of 0.27. 收起 | |
| PChem® MB-11-A | Pioneer Chemicals Co., Ltd. | PChem® MB-11-A, in the form of a bead, is a poly (ethyl methacrylate) polymer and is soluble in aliphatic hydrocarbon solvents, alcohols, and esters. It is a binder for applications of flexographic inks, silk screen inks, and resin for printing ink. PChem...展開 PChem® MB-11-A, in the form of a bead, is a poly (ethyl methacrylate) polymer and is soluble in aliphatic hydrocarbon solvents, alcohols, and esters. It is a binder for applications of flexographic inks, silk screen inks, and resin for printing ink. PChem® MB-11-A has a molecular weight of 50,000 g/mol, moisture content of equal to or less than 1.0%, acid value less than 9.0 mgKOH/g, and an inherent viscosity of 0.27. 收起 | |
| PChem® MB-17 | Pioneer Chemicals Co., Ltd. | PChem® MB-17, in the form of a bead, is a copolymer of acrylate and methacrylate that offers good durability and heat resistance. It also offers good chemical resistances to gasoline, alcohol, and blocks the migration of plasticizer contained in the vinyl...展開 PChem® MB-17, in the form of a bead, is a copolymer of acrylate and methacrylate that offers good durability and heat resistance. It also offers good chemical resistances to gasoline, alcohol, and blocks the migration of plasticizer contained in the vinyl resins. PChem® MB-17 is very compatible with many nitrocellulose and solvents, and commonly used in applications of silk screen printing inks, marine coating, gravure inks, plastic coating, multi-usage ink, and tobacco packaging ink. It has a molecular weight of 90,000 g/mol, moisture content of equal to or less than 1.0%, acid value of equal to or less than 1.0 mgKOH/g, and an inherent viscosity of 0.41. 收起 | |
| PChem® MB-313 | Pioneer Chemicals Co., Ltd. | PChem® MB-313, in the form of a bead, is an acrylic resin that is soluble in glycol ether acetates, esters, ketones, glycol ethers, aromatic, and is very compatible with wide variety of other resins including nitrocellulose, acrylics, and vinyl. It provid...展開 PChem® MB-313, in the form of a bead, is an acrylic resin that is soluble in glycol ether acetates, esters, ketones, glycol ethers, aromatic, and is very compatible with wide variety of other resins including nitrocellulose, acrylics, and vinyl. It provides admirable fast drying characteristics and solvent release ability and it has good pigment wetting properties when used in coating and ink formulations. PChem® MB-313 is for universal applications of exterior paints and metal coatings. It has a molecular weight of 60,000 g/mol, moisture content of equal to or less than 1.0%, acid value of 9 mgKOH/g, and an inherent viscosity of 0.23. 收起 | |
| PChem® MB-38 | Pioneer Chemicals Co., Ltd. | PChem® MB-38, in the form of a bead, is an iso-butyl methacrylate polymer that is soluble in chlorinated hydrocarbons, glycol ethers, esters, ketones, aromatic, and glycol ether acetates. It is very compatible with wide selection of other resins including...展開 PChem® MB-38, in the form of a bead, is an iso-butyl methacrylate polymer that is soluble in chlorinated hydrocarbons, glycol ethers, esters, ketones, aromatic, and glycol ether acetates. It is very compatible with wide selection of other resins including chlorinated rubber resins, nitrocellulose, acrylics, vinyl, and is a good binder for manufacturer of alkyd resins additive, printing inks, heat sealing lacquers for adhesives and aluminum foils, ceramic transfer lacquers, and primers. PChem® MB-38 has a molecular weight of 84,000 g/mol, moisture content of equal to or less than 0.5%, acid value of equal to or less than 1.0 mgKOH/g, and an inherent viscosity of 0.31. 收起 | |
| PChem® MB-4 | Pioneer Chemicals Co., Ltd. | PChem® MB-4, in the form of a bead, is a copolymer of methyl methacrylate and n-butyl methacrylate that offers hard durability and heat resistance. It also offers very good wet and dry adhesion to many plastic substrates such as PVC, polystyrene, ABS, and...展開 PChem® MB-4, in the form of a bead, is a copolymer of methyl methacrylate and n-butyl methacrylate that offers hard durability and heat resistance. It also offers very good wet and dry adhesion to many plastic substrates such as PVC, polystyrene, ABS, and acrylic. PChem® MB-4 is very compatible with various nitrocellulose and solvents, and is generally used in applications of metal coatings, marine coating, silk screen printing inks, plastic coating, and gravure inks. It has a molecular weight of 40,000 g/mol, moisture content of equal to or less than 1.0%, acid value of equal to or less than 6.0 mgKOH/g, and an inherent viscosity of 0.18. 收起 | |
| PChem® MB-6-A | Pioneer Chemicals Co., Ltd. | PChem® MB-6-A, in the form of a bead, is a copolymer of n-butyl methacrylate and methyl methacrylate that offers hard durability and heat resistance. It also offers very good wet and dry adhesion to many plastic substrates such as PVC, polystyrene, ABS, a...展開 PChem® MB-6-A, in the form of a bead, is a copolymer of n-butyl methacrylate and methyl methacrylate that offers hard durability and heat resistance. It also offers very good wet and dry adhesion to many plastic substrates such as PVC, polystyrene, ABS, and acrylic. PChem® MB-6-A is very compatible with various nitrocellulose and solvents, and is generally used in applications of metal coatings, marine coating, silk screen printing inks, plastic coating, and gravure inks. It has a molecular weight of 50,000 g/mol, moisture content of equal to or less than 1.0%, acid value of equal to or less than 7.0 mgKOH/g, and an inherent viscosity of 0.24. 收起 | |
| PChem® MB-605 | Pioneer Chemicals Co., Ltd. | PChem® MB-605, in the form of clear solid beads, is an acrylic resin that provides good pigment dispersion characteristics and wetting and is soluble in glycol ether acetates, esters, glycol ethers, ketones, and aromatic. It is compatible with a wide vari...展開 PChem® MB-605, in the form of clear solid beads, is an acrylic resin that provides good pigment dispersion characteristics and wetting and is soluble in glycol ether acetates, esters, glycol ethers, ketones, and aromatic. It is compatible with a wide variety of other resins, such as nitrocellulose, acrylics, vinyl, and is for use in solvent-based inks. PChem® MB-605 has a molecular weight of 8,200 g/mol, moisture content of equal to or less than 1.0%, acid value of 53 mgKOH/g, and an inherent viscosity of 0.06. 收起 | |
| PChem® MB-9-B | Pioneer Chemicals Co., Ltd. | PChem® MB-9-B, in the form of a bead, is a polymer of iso-butyl methacrylate thacrylate that offers high durability, flexibility, heat resistance, and good gloss. It is easily soluble in several organic solvents such as high alcohol, ketones, esters, chlo...展開 PChem® MB-9-B, in the form of a bead, is a polymer of iso-butyl methacrylate thacrylate that offers high durability, flexibility, heat resistance, and good gloss. It is easily soluble in several organic solvents such as high alcohol, ketones, esters, chlorinated solvent, aromatic hydrocarbons, and white gasoline. PChem® MB-9-A can be used as its modifying agent, based on its good compatibility with middle/long oil alkyd resin. It is also compatible with chlorinated paraffin, PVC resin, and it offers admirable pigment wet-ability. PChem® MB-9-A is applied to plastic coatings, alkyd modified coatings, leather finishes, metal coatings, and gilding material coatings (adhesive layer), PVC printing inks and coatings. It has a molecular weight of 70,000 g/mol, moisture content of equal to or less than 1.0%, acid value of equal to or less than 1.0 mgKOH/g, and an inherent viscosity of 0.31. 收起 |
