| Barium Sulphate BS-419 | Briture Co., Ltd. | Barium Sulphate BS-419 is a chemically synthesized barium sulfate product refined with barium salt and sodium sulfate. This product shields x-rays and y-rays, and can improve the gloss and surface hardness of products. Barium Sulphate BS-419 is used in po...展開 Barium Sulphate BS-419 is a chemically synthesized barium sulfate product refined with barium salt and sodium sulfate. This product shields x-rays and y-rays, and can improve the gloss and surface hardness of products. Barium Sulphate BS-419 is used in powder coatings and printing ink. 收起 | |
| Chlorinated Polypropylene Granular Form | Briture Co., Ltd. | Chlorinated Polypropylene Granular Form is a white or pale yellow granular chlorinated polypropylene adhesive agent that is completely soluble in toluene and xylene. This product has good fluidity and good weather, thermal aging, oil, ozone, chemical and ...展開 Chlorinated Polypropylene Granular Form is a white or pale yellow granular chlorinated polypropylene adhesive agent that is completely soluble in toluene and xylene. This product has good fluidity and good weather, thermal aging, oil, ozone, chemical and fire resistance. Chlorinated Polypropylene Granular Form is used in composite printing inks, coating film, and plastics paint. 收起 | |
| EXOCOAT™ AM | Axcentive Sarl | EXOCOAT® AM by Axcentive is a water-based, doped nano-titanium oxide sol with a strong antimicrobial effect and anatase structure. It prevents the build-up of microbes as the photocatalytic effect results in effective radical formation which breaks down v...展開 EXOCOAT® AM by Axcentive is a water-based, doped nano-titanium oxide sol with a strong antimicrobial effect and anatase structure. It prevents the build-up of microbes as the photocatalytic effect results in effective radical formation which breaks down viruses and bacteria. It eradicates viruses such as influenza, SARS-COV-2, dengue & hepatitis and bacteria such as E. coli, MSRA, streptococcus, listeria, pneumonia, and salmonella. It is activated by light and displays quick drying at room temperature. Spray application is recommended to reach thin monolayers. It exhibits curing at room temperature up to 300°C and super hard particles (1GPa Vickers). It is easy to apply & durable, allowing longer disinfection intervals while preserving hygiene level. It shows non-silver leaching, efficacious even under low light conditions, lower service frequency, and no need for frequent disinfection routine. It is used in the state-of-the-art continuous antimicrobial coating for high-traffic areas. EXOCOAT® AM is suitable for topcoats for any surface inside buildings, stores, hospitals, and vehicles. The shelf life of this product is 9 months. 收起 | |
| Hanos ASP-100F | Hanwha Chemical Corporation | Hanos ASP-100F is a single-walled carbon nano tube produced by conventional arc-discharge process using Fe-based metal catalysts. It has good electric conductivity and heat conductivity with a high crystallinity and aspect ratio giving it excellent mechan...展開 Hanos ASP-100F is a single-walled carbon nano tube produced by conventional arc-discharge process using Fe-based metal catalysts. It has good electric conductivity and heat conductivity with a high crystallinity and aspect ratio giving it excellent mechanical strength. This product is well suited for use in conductive transparent electrodes, conductive nano ink, conductive heating films, nano device, nano-bio material and chemical sensors. 收起 | |
| Hanos AST-100F | Hanwha Chemical Corporation | Hanos AST-100F is a single-walled carbon nano tube produced by conventional arc-discharge process using Fe-based metal catalysts. It has good electric conductivity and heat conductivity with a high crystallinity and aspect ratio giving it excellent mechan...展開 Hanos AST-100F is a single-walled carbon nano tube produced by conventional arc-discharge process using Fe-based metal catalysts. It has good electric conductivity and heat conductivity with a high crystallinity and aspect ratio giving it excellent mechanical strength. This product is well suited for use in conductive transparent electrodes, conductive nano ink, conductive heating films, nano device, nano-bio material and chemical sensors. 收起 | |
| Hanos MWCNT CM-150 | Hanwha Chemical Corporation | Hanos MWCNT CM-150 is a multi-walled carbon nano tube synthesized by catalytic CVD process. It has about 90 wt.% purity without any purification. By virtue of improvements in the synthetic process, it shows enhanced conductivity and dispersibility suitab...展開 Hanos MWCNT CM-150 is a multi-walled carbon nano tube synthesized by catalytic CVD process. It has about 90 wt.% purity without any purification. By virtue of improvements in the synthetic process, it shows enhanced conductivity and dispersibility suitable for conductive composite application. CM-150 Composite material is well suited for the production of ESD, EMI shielding, reinforced material, heat exchangers, etc. 收起 | |
| Hanos MWCNT CM-250 | Hanwha Chemical Corporation | Hanos MWCNT CM-250 is a multi-walled carbon nano tube synthesized by catalytic CVD process. It has about 95 wt.% purity without any purification. By virtue of improvements in the synthetic process, it shows enhanced conductivity and dispersibility suitab...展開 Hanos MWCNT CM-250 is a multi-walled carbon nano tube synthesized by catalytic CVD process. It has about 95 wt.% purity without any purification. By virtue of improvements in the synthetic process, it shows enhanced conductivity and dispersibility suitable for conductive composite application. CM-250 Composite material is well suited for the production of for inks & paste, ESD, EMI Shielding, reinforced materials, heat exchanger, etc. 收起 | |
| Hanos MWCNT CM-280 | Hanwha Chemical Corporation | Hanos MWCNT CM-280 is a multi-walled carbon nano tube synthesized by catalytic CVD process. It has about 95 wt.% purity without any purification. By virtue of improvements in the synthetic process, it shows enhanced conductivity and dispersibility suitab...展開 Hanos MWCNT CM-280 is a multi-walled carbon nano tube synthesized by catalytic CVD process. It has about 95 wt.% purity without any purification. By virtue of improvements in the synthetic process, it shows enhanced conductivity and dispersibility suitable for conductive composite application. CM-280 Composite material is well suited for the production of for inks & paste, ESD, EMI Shielding, reinforced materials, heat exchanger, etc. 收起 | |
| Hanos MWCNT CM-350 | Hanwha Chemical Corporation | Hanos MWCNT CM-350 is a multi-walled carbon nano tube synthesized by catalytic CVD process. It has about 90 wt.% purity without any purification. By virtue of improvements in the synthetic process, it shows enhanced conductivity and dispersibility suitab...展開 Hanos MWCNT CM-350 is a multi-walled carbon nano tube synthesized by catalytic CVD process. It has about 90 wt.% purity without any purification. By virtue of improvements in the synthetic process, it shows enhanced conductivity and dispersibility suitable for conductive composite application. CM-350 Composite material is well suited for the production of for inks & paste, ESD, EMI Shielding, reinforced materials, heat exchanger, etc. 收起 | |
| Hanos PS Compound / Sheet | Hanwha Chemical Corporation | Hanos PS Compound / Sheet is a conductive product for Electrostatic Dissipative(ESD) or antistatic purpose with special CNT layers. It can be used in various industrial areas to prevent electrical damages of target products. It is well suited for use as a...展開 Hanos PS Compound / Sheet is a conductive product for Electrostatic Dissipative(ESD) or antistatic purpose with special CNT layers. It can be used in various industrial areas to prevent electrical damages of target products. It is well suited for use as a filler in the production of sheets or as a black pigment in inks and paints. 收起 | |
| Hanos PS Ink | Hanwha Chemical Corporation | Hanos PS Ink is a PP pellet coating ink that has excellent surface resistance on film. Eco-friendly, it can impart electrostatic resistance, thermal and added strength to many products. It is well suited for use as a filler in various industrial applicati...展開 Hanos PS Ink is a PP pellet coating ink that has excellent surface resistance on film. Eco-friendly, it can impart electrostatic resistance, thermal and added strength to many products. It is well suited for use as a filler in various industrial applications such as conductive films or inks for chip trays. 收起 | |
| Hanos SW01 | Hanwha Chemical Corporation | Hanos SW01 is a water-based CNT ink that has excellent surface resistance on film. Eco-friendly, it can impart electrostatic resistance, thermal and added strength to many products. It is well suited for use as a filler in various industrial applications ...展開 Hanos SW01 is a water-based CNT ink that has excellent surface resistance on film. Eco-friendly, it can impart electrostatic resistance, thermal and added strength to many products. It is well suited for use as a filler in various industrial applications such as conductive films or inks for chip trays. 收起 | |
| Hanos TW01 | Hanwha Chemical Corporation | Hanos TW01 is a water-based CNT ink that has excellent surface resistance on film. Eco-friendly, it can impart electrostatic resistance, thermal and added strength to many products. It is well suited for use as a filler in various industrial applications ...展開 Hanos TW01 is a water-based CNT ink that has excellent surface resistance on film. Eco-friendly, it can impart electrostatic resistance, thermal and added strength to many products. It is well suited for use as a filler in various industrial applications such as conductive films or inks for chip trays. 收起 | |
| Hanwha 2-EH (2-Ethyl-1-Hexanol) | Hanwha Chemical Corporation | Hanwha 2-EH is an colorless, transparent liquid made of 2-Ethyl-1-Hexanol. It is primarily used as the main ingredient in the production of certain types of plasticizers. It is well suited for use in making solvents, stabilizers and acrylates as well. | |
| Hanwha CP-430 | Hanwha Chemical Corporation | Hanwha CP-430 is a Vinyl Chloride-Vinyl Acetate Copolymer with outstanding solvent solubility, adhesion, transparency and liquidity. CP-430 is well suited for use in the production of Gravure inks, adhesives and paints. | |
| Hanwha CP-450 | Hanwha Chemical Corporation | Hanwha CP-450 is a Vinyl Chloride-Vinyl Acetate Copolymer with outstanding solvent solubility, adhesion, transparency and liquidity. CP-450 is well suited for use in the production of inks, adhesives and paints. | |
| Hanwha CP-710 | Hanwha Chemical Corporation | Hanwha CP-710 is a Vinyl Chloride-Vinyl Acetate Copolymer with outstanding solvent solubility, adhesion, transparency and liquidity. CP-710 is well suited for use in the production of inks, adhesives and paints. | |
| Hanwha DIDP (Diisodecyl Phthalate) | Hanwha Chemical Corporation | Hanwha DIDP is a transparent plasticizer made of Diisononyl Phthalate with excellent viscosity and outstanding electrical insulation. It is well suited for use in the production of films, sheets, leathers, wire coatings, wall papers and flooring materials...展開 Hanwha DIDP is a transparent plasticizer made of Diisononyl Phthalate with excellent viscosity and outstanding electrical insulation. It is well suited for use in the production of films, sheets, leathers, wire coatings, wall papers and flooring materials where ever cold, light and chemicals resistance is required. 收起 | |
| Hanwha I-BuOH (2-Methylpropan-1-Ol) | Hanwha Chemical Corporation | Hanwha I-BuOH is an colorless, transparent liquid made of 2-Methylpropan-1-Ol. It is primarily used as the main ingredient in the production of certain types of plasticizers. It is well suited for use in making solvents and amino resins as well. | |
| Hanwha MA (High-purity Maleic Anhydride) | Hanwha Chemical Corporation | Hanwha MA is a pure white flaky solid at room temperature that when heated becomes a colorless transparent liquid. Made of a High-purity Maleic Anhydride, it is primarily used in the production of resins. It can also be used in the production of FRP paint...展開 Hanwha MA is a pure white flaky solid at room temperature that when heated becomes a colorless transparent liquid. Made of a High-purity Maleic Anhydride, it is primarily used in the production of resins. It can also be used in the production of FRP paints, dyes and pigments. 收起 | |
| Hanwha N-BuOH (N-Butyl Alcohol) | Hanwha Chemical Corporation | Hanwha N-BuOH is an colorless, transparent liquid made of N-Butyl Alcohol. It is primarily used as the main ingredient in the production of certain types of plasticizers. It is well suited for use in making solvents, stabilizers and acrylates as well. | |
| Hanwha PA (High-purity Phthalic Anhydride) | Hanwha Chemical Corporation | Hanwha PA is a pure white flaky solid at room temperature that when heated becomes a colorless transparent liquid. Made of High-purity Phthalic Anhydride, it is primarily used in the production of phthalate plasticizers. It can also be used in the product...展開 Hanwha PA is a pure white flaky solid at room temperature that when heated becomes a colorless transparent liquid. Made of High-purity Phthalic Anhydride, it is primarily used in the production of phthalate plasticizers. It can also be used in the production of FRP paints and spandex. 收起 | |
| Hanwha TP-400M | Hanwha Chemical Corporation | Hanwha TP-400M is a PVC resin made from a terpolymer with outstanding adhesion to metals. It is well suited for use in the production of metal coatings, paints and aluminum printing inks. | |
| HCCFlex SP-390 | Hanwha Chemical Corporation | HCCFlex SP-390 is a Non-phthalate plasticizer made of Dioctyl Terephthalate (DOTP) which is non-carcinogenic and contains no environmental hormones. It is well suited for use in the production of films, sheets, leathers, flooring materials, wall papers a...展開 HCCFlex SP-390 is a Non-phthalate plasticizer made of Dioctyl Terephthalate (DOTP) which is non-carcinogenic and contains no environmental hormones. It is well suited for use in the production of films, sheets, leathers, flooring materials, wall papers and wire coatings. 收起 | |
| Ketjenflex® 12 | Axcentive Sarl | Ketjenflex® 12 is a citrate based clear liquid. It is used as a partially bio-based plasticizer for inks, adhesives, and coatings. Ketjenflex® 12 can be used in vinyl formulations such as PVC plastics, vinyl flooring, solution vinyl resins, wood vinyl com...展開 Ketjenflex® 12 is a citrate based clear liquid. It is used as a partially bio-based plasticizer for inks, adhesives, and coatings. Ketjenflex® 12 can be used in vinyl formulations such as PVC plastics, vinyl flooring, solution vinyl resins, wood vinyl compounds, and PVC based plastisols. It can also be used in PVC based polymers, nitrocellulose resins, and cyanoacrylate adhesives. 收起 | |
| Ketjenflex® 6 | Axcentive Sarl | Ketjenflex® 6 is a toluene sulfonamide in the form of a white crystalline powder. It is used as a plasticizer in inks, adhesives, and coatings. Ketjenflex® 6 can be used with resins such as nitrocellulose, polyamide, PVAC, rosin, epoxy, and more. | |
| Ketjenflex® 8 | Axcentive Sarl | Ketjenflex® 8 is a toluene sulfonamide in the form of a clear, slightly yellow liquid. It is used as a plasticizer and adhesion promoter in inks, adhesives, and coatings. Ketjenflex® 8 can be used with applications such as PVAC, nitrocellulose, powder coa...展開 Ketjenflex® 8 is a toluene sulfonamide in the form of a clear, slightly yellow liquid. It is used as a plasticizer and adhesion promoter in inks, adhesives, and coatings. Ketjenflex® 8 can be used with applications such as PVAC, nitrocellulose, powder coatings, synthetic polyamides, epoxy coatings and adhesives, and more. 收起 | |
| Ketjenflex® CP | Axcentive Sarl | Ketjenflex® CP is a para toluene sulfonic acid in the form of a white crystalline powder. It is used as a strong protonating catalyst. Ketjenflex® CP can be used in acid cured wood coatings. | |
| Ketjenflex® MH | Axcentive Sarl | Ketjenflex® MH is a toluene sulfonamide in the form of a hard, transparent resin. It is used at a plasticizing co-resin in coatings, adhesives, and inks. Ketjenflex® MH can be used in nitrocellulose coatings, epoxy based coatings and adhesives, and printi...展開 Ketjenflex® MH is a toluene sulfonamide in the form of a hard, transparent resin. It is used at a plasticizing co-resin in coatings, adhesives, and inks. Ketjenflex® MH can be used in nitrocellulose coatings, epoxy based coatings and adhesives, and printing inks. 收起 | |
| Ketjenflex® MS 80 | Axcentive Sarl | Ketjenflex® MS 80 is a toluene sulfonamide in the form of a transparent liquid. it is used as a plasticizing co-resin in butyl acetate for coatings, adhesives, and inks. Ketjenflex® MS 80 is the liquid version of Ketjenflex® MH and can easily be poured in...展開 Ketjenflex® MS 80 is a toluene sulfonamide in the form of a transparent liquid. it is used as a plasticizing co-resin in butyl acetate for coatings, adhesives, and inks. Ketjenflex® MS 80 is the liquid version of Ketjenflex® MH and can easily be poured into desired formulations. It has applications in nitrocellulose coatings, cellulose acetate formulations, and printing inks. 收起 | |
| Polyamide Resin Alcohol Soluble PA-010 | Briture Co., Ltd. | Polyamide Resin Alcohol Soluble PA-010 is a transparent yellowish granular polyamide resin. This product is water and gel resistant with good gloss, fluidity and pigment wetting properties. It also has good compatibility with nitrocotton and varnish stabi...展開 Polyamide Resin Alcohol Soluble PA-010 is a transparent yellowish granular polyamide resin. This product is water and gel resistant with good gloss, fluidity and pigment wetting properties. It also has good compatibility with nitrocotton and varnish stability. Polyamide Resin Alcohol Soluble PA-010 is used in flexographic plastic ink, printing ink, and heat seal coating. 收起 | |
| Polyamide Resin Co-Solvent Soluble | Briture Co., Ltd. | Polyamide Resin Co-Solvent Soluble is a benzene soluble polyamide resin. This product has good stability, solvent liberation, bending flexure, glossiness, adhesive power, solvent release and gel resistance. Polyamide Resin Co-Solvent Soluble is used in va...展開 Polyamide Resin Co-Solvent Soluble is a benzene soluble polyamide resin. This product has good stability, solvent liberation, bending flexure, glossiness, adhesive power, solvent release and gel resistance. Polyamide Resin Co-Solvent Soluble is used in various printing inks. 收起 | |
| R-730 TiO2 | Boom Industry (SH) Co., Ltd. | R-730 TiO2 is a stable universal rutile titanium dioxide used for its versatility, durability, hiding power and gloss. This product can be applied to senior industrial coating that requires high weather resistance, paints and inks. | |
| R-750 TiO2 | Boom Industry (SH) Co., Ltd. | R-750 TiO2 is a general-purpose product created through a sulfuric acid production process. This product has good dispersion, hiding power, weather resistance and other characteristics. It is commonly used in interior and exterior paints and inks. | |
| R-760 TiO2 | Boom Industry (SH) Co., Ltd. | R-760 TiO2 is a general-purpose rutile titanium dioxide than can be easily scattered, moistened or mixed with other resins. This product provides weather resistance, hiding power, anti-chalking property and yellowing resistance in industrial paints, print...展開 R-760 TiO2 is a general-purpose rutile titanium dioxide than can be easily scattered, moistened or mixed with other resins. This product provides weather resistance, hiding power, anti-chalking property and yellowing resistance in industrial paints, printing inks and different kinds of coatings. 收起 | |
| R-98 TiO2 | Boom Industry (SH) Co., Ltd. | R-98 TiO2 is a chlorination rutile pigment derived from chlorination and oxidation of silicon. This product has good weather resistance, excellent stability and high dispersibility. It is commonly used in coatings and printing inks. | |
| Thermoplastic Solid Acrylic Resin BA-66 | Briture Co., Ltd. | Thermoplastic Solid Acrylic Resin BA-66 is a white powder that can be dissolved in ester kind, ketone and kind solvent. This product has good luster, rigidity, pigment dispersion and chemical and weathering resistance. Thermoplastic Solid Acrylic Resin BA...展開 Thermoplastic Solid Acrylic Resin BA-66 is a white powder that can be dissolved in ester kind, ketone and kind solvent. This product has good luster, rigidity, pigment dispersion and chemical and weathering resistance. Thermoplastic Solid Acrylic Resin BA-66 is used in soft plastic paint, plastic printing ink, container paint, and industry paint. 收起 | |
| Titanium Dioxide Anatase BA-01 | Briture Co., Ltd. | Titanium Dioxide Anatase BA-01 is a white titanium dioxide powdered pigment. This product has tinting power and fineness and dispersibility properties. Titanium Dioxide Anatase BA-01 is used in paints. | |
| Titanium Dioxide Rutile BR-889 | Briture Co., Ltd. | Titanium Dioxide Rutile BR-889 is a powdered titanium dioxide white pigment with high gloss. This product has high weather resistance and hiding powder, a stable hue, and is easy for damping and dispersion. Titanium Dioxide Rutile BR-889 is used in high-l...展開 Titanium Dioxide Rutile BR-889 is a powdered titanium dioxide white pigment with high gloss. This product has high weather resistance and hiding powder, a stable hue, and is easy for damping and dispersion. Titanium Dioxide Rutile BR-889 is used in high-level solvent coatings, high gloss paint, industrial paint, surface printing ink, iron printing ink, and powder coatings. 收起 | |
| Tri Isobutyl Phosphate 99%min | Briture Co., Ltd. | Tri Isobutyl Phosphate 99%min is a colorless transparent liquid. This product is used as a defoamer. Tri Isobutyl Phosphate 99%min is used in dyeing and printing ink. |
