| AR-515 | Chan Sieh Enterprises Co, Ltd. | AR-515 is an IBMA homo-polymer acrylic resin. This product has high tolerance for pigments and low odour. It can be used in aerosol paints and inks. AR-515 creates a flexible film and is solvent in ketones and aromatics. | |
| AR-518 | Chan Sieh Enterprises Co, Ltd. | AR-518 is a styrene copolymer acrylic resin. This product has high gloss, and provides both heat- and chemical-resistance. It can be used in topcoats and primers for aluminum, and in inks. AR-518 is solvent in ketones, aromatics, and esters. | |
| AR-523 | Chan Sieh Enterprises Co, Ltd. | AR-523 is a BMA copolymer resin featuring good water-resistance, low odor, and good outdoor durability. This product can be used in flexo and gravure printing inks, packaging inks, plastic coatings, and aluminum heat seal lacquers. | |
| AR-531 | Chan Sieh Enterprises Co, Ltd. | AR-531 is a BMA copolymer acrylic resin. This product has a high tolerance for pigments, and shows good heat resistance. It can be used in aerosols, packaging inks, flexo and gravure printing inks, alkyd paints, and parquet polishes. AR-531 is solvent ...展開 AR-531 is a BMA copolymer acrylic resin. This product has a high tolerance for pigments, and shows good heat resistance. It can be used in aerosols, packaging inks, flexo and gravure printing inks, alkyd paints, and parquet polishes. AR-531 is solvent in alcohols, ketones, aromatics, and esters. 收起 | |
| AR-620 | Chan Sieh Enterprises Co, Ltd. | AR-620 is an acrylic resin printing binder in the form of a white emulsion. This product features long retention of film surface tack. It can be used to temporarily adhere fabrics to a printing board. | |
| Benzophenone | Eutec Chemical Co., Ltd. | Benzophenone is an additive primarily used as an photoinitiator and sensitizer. Available as a white to off-white flake, with a melting point of 47-49℃, resulting in a clear transparent solution. This additive is suited for use with UV-cured resins in the...展開 Benzophenone is an additive primarily used as an photoinitiator and sensitizer. Available as a white to off-white flake, with a melting point of 47-49℃, resulting in a clear transparent solution. This additive is suited for use with UV-cured resins in the production of inks and coatings. 收起 | |
| Biocel SP/SG 85 | Gohil Dyechem Corporation | Biocel SP/SG 85 is a light brown, granular powder used in the preservation of wood. It is used as an industrial fungicide in paints and adhesives. | |
| Eusorb UV-5033 (BP-5) | Eutec Chemical Co., Ltd. | Eusorb UV-5033 (BP-5) is a white or light yellow powder crystal powdered form of 2-Hydroxy-4-methoxybenzene-5-sulfonic acid sodium salt. It can be used in coatings and printing inks for UV curing and as a UV absorber and light stabilizer for glass product...展開 Eusorb UV-5033 (BP-5) is a white or light yellow powder crystal powdered form of 2-Hydroxy-4-methoxybenzene-5-sulfonic acid sodium salt. It can be used in coatings and printing inks for UV curing and as a UV absorber and light stabilizer for glass products, Plastics, thermoplastics and polyethylene films . 收起 | |
| Eusorb UV-5411 | Eutec Chemical Co., Ltd. | Eusorb UV-5411 is a white to off-white crystalline powder with a melting point between 103-107℃ and a 0.1% Ash content. This product provides initial color and relatively low volatility making it an efficient UV-absorber for polyvinyl butyral (molding, sh...展開 Eusorb UV-5411 is a white to off-white crystalline powder with a melting point between 103-107℃ and a 0.1% Ash content. This product provides initial color and relatively low volatility making it an efficient UV-absorber for polyvinyl butyral (molding, sheet, glazing materials for window, lighting, sign, marine, and auto applications), coatings, photo products and sealants. 收起 | |
| Eusorb UV-P | Eutec Chemical Co., Ltd. | Eusorb UV-P is a pale yellow crystalline powder with a melting point between 128-132℃. This product is an efficient UV-absorber for styrenic polymers, PVC, unsaturated polyesters, PU, acrylic polymers, polycarbonates, adhesives and coatings. | |
| Eutex 127 | Eutec Chemical Co., Ltd. | Eutex 127 is a slightly green-yellow fine powder with a melting point between 216-222℃. This product is an efficient optical brightener for polymers, lacquers, printing inks and man-made fibers. | |
| Eutex KSN | Eutec Chemical Co., Ltd. | Eutex KSN is a yellow crystalline powder used as an optical brightener that provides white effects with neutral to bluish violet shade and excellent light fastness. It is suited for brightening of synthetic high polymers at any processing stage including ...展開 Eutex KSN is a yellow crystalline powder used as an optical brightener that provides white effects with neutral to bluish violet shade and excellent light fastness. It is suited for brightening of synthetic high polymers at any processing stage including printing inks and paints while requiring relatively small quantities. 收起 | |
| Eutex OB | Eutec Chemical Co., Ltd. | Eutex OB is a pale yellow-green fine powder of 2,2'-(2,5-Thiophenediyl)bis[5-tert-butylbenzoxazole] with a melting point between 197-203℃. This product is used as an optical brightener recommended for a variety clear lacquers, UV coatings and printing ink...展開 Eutex OB is a pale yellow-green fine powder of 2,2'-(2,5-Thiophenediyl)bis[5-tert-butylbenzoxazole] with a melting point between 197-203℃. This product is used as an optical brightener recommended for a variety clear lacquers, UV coatings and printing inks. 收起 | |
| L-2813 | Chan Sieh Enterprises Co, Ltd. | L-2813 is an aliphatic polyether polyol with a solid content ratio of 39%. This product is tough, solvent free, and compatible with acrylic emulsions. It can be used in peelable metal coatings, printing inks, fiberglass, floor coatings, and paper and te...展開 L-2813 is an aliphatic polyether polyol with a solid content ratio of 39%. This product is tough, solvent free, and compatible with acrylic emulsions. It can be used in peelable metal coatings, printing inks, fiberglass, floor coatings, and paper and textile coatings. 收起 | |
| L-2842 | Chan Sieh Enterprises Co, Ltd. | L-2842 is an aliphatic polyether polyol with a solid content ratio of 34%. This product provides good adhesion on flexible substrates and good solvent resistance. It can be used in printing inks, paper and textile coatings, and floor coatings. | |
| L-2869 | Chan Sieh Enterprises Co, Ltd. | L-2869 is an aliphatic polyether polyol with a solid content ratio of 39%. This product is tough, free of solvents, and is compatible with acrylic emulsions. It can be used in peelable metal coatings, printing ink and glass fiber, and floor, paper and t...展開 L-2869 is an aliphatic polyether polyol with a solid content ratio of 39%. This product is tough, free of solvents, and is compatible with acrylic emulsions. It can be used in peelable metal coatings, printing ink and glass fiber, and floor, paper and textile coatings. 收起 | |
| L-2908 | Chan Sieh Enterprises Co, Ltd. | L-2908 is an aliphatic polyester polyol with a solid content ratio of 33.5%. This product is hard, flexible and durable. It provides chemical, water, humidity, UV, and abrasion resistance. It can be used in screen and gravure inks, concrete and metal c...展開 L-2908 is an aliphatic polyester polyol with a solid content ratio of 33.5%. This product is hard, flexible and durable. It provides chemical, water, humidity, UV, and abrasion resistance. It can be used in screen and gravure inks, concrete and metal coatings, and to coat vinyl, wood, and plastic. 收起 | |
| L-2909 | Chan Sieh Enterprises Co, Ltd. | L-2909 is an aliphatic polyester polyol with a solid content ratio of 33.5%. This product is hard, flexible and durable. It provides chemical, water, humidity, UV, and abrasion resistance. It can be used in screen and gravure inks, and to coat concrete...展開 L-2909 is an aliphatic polyester polyol with a solid content ratio of 33.5%. This product is hard, flexible and durable. It provides chemical, water, humidity, UV, and abrasion resistance. It can be used in screen and gravure inks, and to coat concrete, metal, vinyl, wood and plastic. 收起 | |
| L-2911 | Chan Sieh Enterprises Co, Ltd. | L-2911 is an aliphatic polyester polyol with a solid content ratio of 30%. This product is soft and flexible. It provides non-yellowing abrasion resistance. It can be used in printing inks for pvc flooring, and to coat paper, leather, plastic, wood, an...展開 L-2911 is an aliphatic polyester polyol with a solid content ratio of 30%. This product is soft and flexible. It provides non-yellowing abrasion resistance. It can be used in printing inks for pvc flooring, and to coat paper, leather, plastic, wood, and parquet. 收起 | |
| L-2917 | Chan Sieh Enterprises Co, Ltd. | L-2917 is an aliphatic polyester polyol with a solid content ratio of 34%. This product is flexible and provides abrasion and chemical resistance. It is an excellent adhesive to plastic, and is compatible with acrylic emulsions. This product can be use...展開 L-2917 is an aliphatic polyester polyol with a solid content ratio of 34%. This product is flexible and provides abrasion and chemical resistance. It is an excellent adhesive to plastic, and is compatible with acrylic emulsions. This product can be used in printing inks, and to coat plastic, leather, concrete, metal, wood, and paper. 收起 | |
| L-2946 | Chan Sieh Enterprises Co, Ltd. | L-2946 is an aliphatic polyester polyol with a solid content ratio of 32%. This product provides solvent and blocking resistance, and is hard and flexible with good adhesion on flexible substrates. It can be used in printing ink, and to coat glass, conc...展開 L-2946 is an aliphatic polyester polyol with a solid content ratio of 32%. This product provides solvent and blocking resistance, and is hard and flexible with good adhesion on flexible substrates. It can be used in printing ink, and to coat glass, concrete, wood, and parquet. 收起 | |
| L-2976 | Chan Sieh Enterprises Co, Ltd. | L-2976 is an aliphatic polyester polyol with a solid content ratio of 33.8%. This product dries hard and fast, and offers chemical and abrasion resistance. It can be used in screen inks, and to coat metal, plastic, wood and parquet. | |
| L-2982 | Chan Sieh Enterprises Co, Ltd. | L-2982 is an aliphatic polyester polyol with a solid content ratio of 34%. This product is flexible, and provides humidity and abrasion resistance. It can be used in printing inks, and to coat metal, concrete, plastic, wood and parquet. | |
| L-2991 | Chan Sieh Enterprises Co, Ltd. | L-2991 is an aliphatic polyester polyol with a solid content ratio of 39%. This product is tough and flexible, adheres well to plastic, and is compatible with acrylic emulsions. It offers chemical and abrasion resistance. L-2991 can be used in printing...展開 L-2991 is an aliphatic polyester polyol with a solid content ratio of 39%. This product is tough and flexible, adheres well to plastic, and is compatible with acrylic emulsions. It offers chemical and abrasion resistance. L-2991 can be used in printing inks, and to coat plastic, leather, concrete, wood and parquet. 收起 | |
| L-2994 | Chan Sieh Enterprises Co, Ltd. | L-2994 is an aliphatic polyester polyol featuring good flexibility and adherence to plastic. This product is well suited for use in flexo and gravure printing inks. | |
| L-3042 | Chan Sieh Enterprises Co, Ltd. | L-3042 is an aliphatic polycarbonate polyol that is very hard, tough, and flexible. Featuring good chemical, solvent, water, humidity, and UV resistance, this product is well suited for use in applications such as PVC flooring topcoats, primers and coati...展開 L-3042 is an aliphatic polycarbonate polyol that is very hard, tough, and flexible. Featuring good chemical, solvent, water, humidity, and UV resistance, this product is well suited for use in applications such as PVC flooring topcoats, primers and coatings for metal and plastic surfaces, lacquers and coatings for wood and parquet floors, overprint varnishes, furniture coatings, and textured coatings. 收起 | |
| L-3410 | Chan Sieh Enterprises Co, Ltd. | L-3410 is an ultraviolet-curable polyol with a solid-content ratio of 39,8%. This product is hard and flexible, and provides abrasion, chemical and stain resistance. It can be used in PVC and non-PVC floor coatings, to coat furniture, paper, plastic, wo...展開 L-3410 is an ultraviolet-curable polyol with a solid-content ratio of 39,8%. This product is hard and flexible, and provides abrasion, chemical and stain resistance. It can be used in PVC and non-PVC floor coatings, to coat furniture, paper, plastic, wood, parquet, overprint varnishes, and inks. 收起 | |
| L-3952 | Chan Sieh Enterprises Co, Ltd. | L-3952 is an aqueous polyurethane acrylate copolymer that provides excellent chemical resistance and BHMR. This product can be used in flat parquet lacquers, printing inks, and decorative paints. | |
| Leuco Crystal Violet | Eutec Chemical Co., Ltd. | Leuco Crystal Violet or Tris(4-dimethylaminophenyl) methane is a clear solution white crystalline powder. This product is used as an indicator dye for radiation-curable imaging systems. | |
| P-103 | Chan Sieh Enterprises Co, Ltd. | P-103 is a self-crosslinking acrylic resin in the form of a white emulsion. This product provides good flexibility, washability, color value, and pigment adhesion. It can be used as a binder for pigment printing. | |
| P-103H | Chan Sieh Enterprises Co, Ltd. | P-103H is a self-crosslinking acrylic resin in the form of a white emulsion. This product provides good flexibility, washability, color value, and pigment adhesion. It can be used as a binder for pigment printing. | |
| P-103H-1 | Chan Sieh Enterprises Co, Ltd. | P-103H-1 is a self-crosslinking acrylic resin in the form of a white emulsion. This product provides good flexibility, washability, color value and pigment adhesion. It can be used as a binder for pigment printing. | |
| P-104 | Chan Sieh Enterprises Co, Ltd. | P-104 is a self-crosslinking acrylic resin in the form of a white emulsion. This product provides good flexibility, washability, color value and pigment adhesion. It can be used as a binder for pigment printing. | |
| P-104H | Chan Sieh Enterprises Co, Ltd. | P-104H is a self-crosslinking acrylic resin in the form of a white emulsion. This product provides good flexibility, washability, color value and pigment adhesion. It can be used as a binder for pigment printing. | |
| P-125U | Chan Sieh Enterprises Co, Ltd. | P-125U is a self-crosslinking styrene acrylic copolymer in the form of a transparent emulsion. This product provides good flexibility, washability, color value and pigment adhesion. It can be used as a binder for pigment printing. | |
| P-145U | Chan Sieh Enterprises Co, Ltd. | P-145U is a self-crosslinking styrene acrylic copolymer in the form of a yellowish transparent emulsion. This product provides good flexibility, washability, color value and pigment adhesion. It can be used as a binder for pigment printing. | |
| P-155U | Chan Sieh Enterprises Co, Ltd. | P-155U is a self-crosslinking styrene acrylic copolymer in the form of a transparent emulsion. This product provides good flexibility, washability, color value, and pigment adhesion. It can be used as a binder for pigment printing. | |
| P-2026 | Chan Sieh Enterprises Co, Ltd. | P-2026 is a vinyl acetate acrylic copolymer in the form of a white emulsion. This product has good color value and pigment adhesion. It can be used as a binder for pigment printing. It is suitable for cotton fabrics. | |
| P-645 | Chan Sieh Enterprises Co, Ltd. | P-645 is a self-crosslinking acrylic resin in the form of a yellowish transparent emulsion. This product has good flexibility, washability, color value, and pigment adhesion. It can be used as a binder for pigment printing. | |
| PB-145 | Chan Sieh Enterprises Co, Ltd. | PB-145 is a self-crosslinking styrene acrylic copolymer in the form of a yellowish transparent emulsion. This product has good flexibility, washability, color value and pigment adhesion. It can be used as a binder for pigment printing. | |
| PB-155 | Chan Sieh Enterprises Co, Ltd. | PB-155 is a self-crosslinking styrene acrylic copolymer in the form of a white emulsion. This product has good flexibility, washability, color value and pigment adhesion. It can be used as a binder for pigment printing. | |
| Photocure 1100 | Eutec Chemical Co., Ltd. | Photocure 1100 is a pale yellow powder and an efficient photoinitiator suitable for imaging applications in color filter resists & resists for production of black matrix, column spacers, overcoats & passivation films of liquid crystal displays. However, ...展開 Photocure 1100 is a pale yellow powder and an efficient photoinitiator suitable for imaging applications in color filter resists & resists for production of black matrix, column spacers, overcoats & passivation films of liquid crystal displays. However, this product also has temperature process characteristics, absorption properties and exhibits curing performance in highly pigmented resist formulations with only a low concentration necessary. 收起 | |
| Photocure 2240 | Eutec Chemical Co., Ltd. | Photocure 2240 is a white to off-white crystalline powder of o-methyl benzoyl benzoate with a melting point between 48-54℃. This product is an odorless photosensitizer for UV-curable systems. | |
| Photocure 251 | Eutec Chemical Co., Ltd. | Photocure 251 is 4-Chlorobenzophenone and a white to off-white crystalline powder used as an odorless photosensitizer for UV-curable systems. This product has a melting point between 75-77℃. | |
| Photocure 2959 | Eutec Chemical Co., Ltd. | Photocure 2959 is a white powder and a non-yellowing photoinitiator for UV-curable systems. This product is commonly used when little odor is required and for water-borne UV-curable systems. In addition, an active hydroxyl group can be reacted with suita...展開 Photocure 2959 is a white powder and a non-yellowing photoinitiator for UV-curable systems. This product is commonly used when little odor is required and for water-borne UV-curable systems. In addition, an active hydroxyl group can be reacted with suitable functionalized unsaturated resins. 收起 | |
| Photocure 304 (BMS) | Eutec Chemical Co., Ltd. | Photocure 304 (BMS) is a white crystalline powder with a 73-85℃ melting point. This product is an efficient photoinitiator used in UV-curable printing inks, wood varnishes, decorative coatings for metal cans, clear lacquers, pigmented coatings. | |
| Photocure 369 | Eutec Chemical Co., Ltd. | Photocure 369 is a clear solution light yellow crystalline powder with a melting point between 110-119℃. This product is used an an efficient photoinitiator for non-white pigmented UV-curable systems. | |
| Photocure 393 | Eutec Chemical Co., Ltd. | Photocure 393 is a white crystalline powder of tribromomethyl phenylsulfone with a melting point of 142℃. This product is an efficient photoinitiator for photosensitive polymers which are used in PS plate, dry film resist, photo resist and other functions...展開 Photocure 393 is a white crystalline powder of tribromomethyl phenylsulfone with a melting point of 142℃. This product is an efficient photoinitiator for photosensitive polymers which are used in PS plate, dry film resist, photo resist and other functions. 收起 | |
| Photocure 400 | Eutec Chemical Co., Ltd. | Photocure 400 is an orange crystalline powder of 1,3-Bis(p-dimethylaminobenzylidene) acetone. This product is an efficient photosensitizer for a bimolecular visible light photosensitive imaging systems. It has a maximum absorption of 450 nm and can sensit...展開 Photocure 400 is an orange crystalline powder of 1,3-Bis(p-dimethylaminobenzylidene) acetone. This product is an efficient photosensitizer for a bimolecular visible light photosensitive imaging systems. It has a maximum absorption of 450 nm and can sensitize a photoinitiator to shift to 405 nm absorption. 收起 | |
| Photocure 4196 | Eutec Chemical Co., Ltd. | Photocure 4196 is a white to off-white crystalline flake of 4-Methylbenzophenone with a melting point between 55-57℃. This product is used as a photoinitiator for UV-cured coatings, inks & resists. | |
| Photocure 50 | Eutec Chemical Co., Ltd. | Photocure 50 or 2-Hydroxy-2-methyl-phenyl-propane-1-one is a clear solution light yellow and transparent liquid. This product is used as an efficient photoinitiator for UV-curable systems to provide non-yellowing. | |
| Photocure 51 | Eutec Chemical Co., Ltd. | Photocure 51 is benzil dimethylketal and a white crystalline solid. This product is a highly efficient photoinitiator for UV-curable systems. | |
| Photocure 550 | Eutec Chemical Co., Ltd. | Photocure 550 is a slightly yellow liquid of Methyl Benzoylformate. This product is an efficient photo initiator for UV-curable systems that provides non-yellowing durability and longer shelf life for UV-curable systems. | |
| Photocure 784 | Eutec Chemical Co., Ltd. | Photocure 784 is a yellow to orange powder with a melting point of 160-170℃. This product is an efficient photoinitiator for pigmented UV-curable systems, photoresists and printing plates | |
| Photocure 81 | Eutec Chemical Co., Ltd. | Photocure 81 is liquid benzophenone and a low viscosity clear and light yellow oily liquid photoinitiator at room temperature. This product has good efficiency, complete solubility and is easily combined making it useful for UV-curable systems to replace ...展開 Photocure 81 is liquid benzophenone and a low viscosity clear and light yellow oily liquid photoinitiator at room temperature. This product has good efficiency, complete solubility and is easily combined making it useful for UV-curable systems to replace Benzophenone, especially for formulations of UV inks & resists. 收起 | |
| Photocure 819 | Eutec Chemical Co., Ltd. | Photocure 819 is a yellow crystalline powder of Bis(2,4,6-trimethylbenzoyl)-phenylphosphineoxide. This product has a melting point between 127-133℃ and is used as an efficient photoinitiator for UV-curable systems. | |
| Photocure 84 | Eutec Chemical Co., Ltd. | Photocure 84 is a white crystalline powdered 1-Hydroxy cyclohexyl phenyl ketone and an efficient photoinitiator for UV-curable systems with non-yellowing durability and longer shelf life. This product has a 47-50℃ melting point and 0.5% max loss on drying...展開 Photocure 84 is a white crystalline powdered 1-Hydroxy cyclohexyl phenyl ketone and an efficient photoinitiator for UV-curable systems with non-yellowing durability and longer shelf life. This product has a 47-50℃ melting point and 0.5% max loss on drying. 收起 | |
| Photocure 900 (B-CIM) | Eutec Chemical Co., Ltd. | Photocure 900 (B-CIM) is a clear solution yellow crystalline powdered 2,2’-Bis-(2-Chlorophenyl)-4,5,4’,5’- tetraphenyl-2’H-biimidazolyl. It is used as a photoinitiator for photosensitive polymers in PS plate, dry film resist, photo resist and other functi...展開 Photocure 900 (B-CIM) is a clear solution yellow crystalline powdered 2,2’-Bis-(2-Chlorophenyl)-4,5,4’,5’- tetraphenyl-2’H-biimidazolyl. It is used as a photoinitiator for photosensitive polymers in PS plate, dry film resist, photo resist and other functions. 收起 | |
| Photocure 907 | Eutec Chemical Co., Ltd. | Photocure 907 is a clear solution white to off-white crystalline powder with a melting point between 72-75℃. This product is used as an efficient photoinitiator for pigmented UV-curable systems, photoresists and printing plates. | |
| Photocure 980 | Eutec Chemical Co., Ltd. | Photocure 980 is a white to off-white crystalline powder of 2,4,5-Triarylimidazole derivative. This product is an efficient photoinitiator for photosensitive polymers which are used in PS plate, dry film resist and photo resist. It is soluble in most or...展開 Photocure 980 is a white to off-white crystalline powder of 2,4,5-Triarylimidazole derivative. This product is an efficient photoinitiator for photosensitive polymers which are used in PS plate, dry film resist and photo resist. It is soluble in most organic solvents and contains a characteristic UV absorption that is more red-shifted to the radiation source of i-line than the conventional BCIM. 收起 | |
| Photocure 9PA | Eutec Chemical Co., Ltd. | Photocure 9PA is a yellow powder of 9-Phenylacridine. This product has a minimum melting point of 184℃ and an efficient photoinitiator for photosensitive polymers. | |
| Photocure DETX | Eutec Chemical Co., Ltd. | Photocure DETX is a yellow crystalline powder of 2,4-diethylthioxanthone and an efficient photoinitiator with a melting point between 65-75℃. This product is used for printing inks, wood varnishes, decorative coatings for metal cans and food cartons, adhe...展開 Photocure DETX is a yellow crystalline powder of 2,4-diethylthioxanthone and an efficient photoinitiator with a melting point between 65-75℃. This product is used for printing inks, wood varnishes, decorative coatings for metal cans and food cartons, adhesives, pressure transfer sheets and photo resists. 收起 | |
| Photocure EAB | Eutec Chemical Co., Ltd. | Photocure EAB is a light yellow to light yellow-green crystalline powder with a minimum melting point of 92℃. This product is an efficient photosensitizer used in UV-cured inks and resists. | |
| Photocure EAQ | Eutec Chemical Co., Ltd. | Photocure EAQ is a light yellow crystalline powder or flake of 2-Ethylanthraquinone with a melting point between 107-111℃. This product is an efficient photoinitiators for photosensitive polymers. | |
| Photocure EDB | Eutec Chemical Co., Ltd. | Photocure EDB or Ethyl 4-N,N-dimethylaminobenzoate is a clear solution white crystalline powder used as an efficient photoactivator. When this product is used in combination with other photoinitiators it can convert energy transfer into free radicals and...展開 Photocure EDB or Ethyl 4-N,N-dimethylaminobenzoate is a clear solution white crystalline powder used as an efficient photoactivator. When this product is used in combination with other photoinitiators it can convert energy transfer into free radicals and start photopolymerization of suitable resin formulations. 收起 | |
| Photocure EHDB | Eutec Chemical Co., Ltd. | Photocure EHDB or 2-Ethylhexyl-4-N,N-dimethylamino-benzoate is a pale yellow clear liquid used as an efficient photoactivator. When this product is used in combination with other photoinitiators it can convert energy transfer into free radicals and start ...展開 Photocure EHDB or 2-Ethylhexyl-4-N,N-dimethylamino-benzoate is a pale yellow clear liquid used as an efficient photoactivator. When this product is used in combination with other photoinitiators it can convert energy transfer into free radicals and start photopolymerization of suitable resin formulations. 收起 | |
| Photocure IDB | Eutec Chemical Co., Ltd. | Photocure IDB is a pale yellow liquid of Isoamyl 4-N,N-dimethylaminobenzoate. This product is an efficient photoactivator which can be used with photoinitiators to convert energy transfer intro free radicals and initiate photopolymerization of suitable re...展開 Photocure IDB is a pale yellow liquid of Isoamyl 4-N,N-dimethylaminobenzoate. This product is an efficient photoactivator which can be used with photoinitiators to convert energy transfer intro free radicals and initiate photopolymerization of suitable resin formulations. 收起 | |
| Photocure ITX-P | Eutec Chemical Co., Ltd. | Photocure ITX-P is a yellow crystalline powder of 2-Isopropylthioxanthone with a melting point between 70-76℃. This product is an efficient photoinitiator for printing inks, wood varnishes, decorative coatings for metal cans and food cartons, adhesives a...展開 Photocure ITX-P is a yellow crystalline powder of 2-Isopropylthioxanthone with a melting point between 70-76℃. This product is an efficient photoinitiator for printing inks, wood varnishes, decorative coatings for metal cans and food cartons, adhesives and pressure transfer sheets. 收起 | |
| Photocure PDO | Eutec Chemical Co., Ltd. | Photocure PDO is a white crystalline powder of 1-Phenyl-1,2-propanedione-2-(O-ethoxycarboxy)oxime. This product is an efficient photoinitiator for photosensitive polymers which are used in dark system of UV curing inks. | |
| Photocure TAZ-110 | Eutec Chemical Co., Ltd. | Photocure TAZ-110 is a yellow powder of 2,4-Bis(trichloromethyl)-6-(p-methoxystyryl)-s-triazine with a melting point between 190-193°C. This product is an efficient photoacid generator for UV-curable systems such as ink, adhesives and photo resists for di...展開 Photocure TAZ-110 is a yellow powder of 2,4-Bis(trichloromethyl)-6-(p-methoxystyryl)-s-triazine with a melting point between 190-193°C. This product is an efficient photoacid generator for UV-curable systems such as ink, adhesives and photo resists for display materials. 收起 | |
| Photocure TAZ-250 | Eutec Chemical Co., Ltd. | Photocure TAZ-250 (2-[4’-Ethyl(1,1’-biphenyl)-4-yl]-4,6-bis(trichloromethyl)-1,3,5-triazine) is a pale yellow to yellow powder with a melting point between 140-144°C. This product is an efficient photoacid generator for UV-curable systems such as ink, adh...展開 Photocure TAZ-250 (2-[4’-Ethyl(1,1’-biphenyl)-4-yl]-4,6-bis(trichloromethyl)-1,3,5-triazine) is a pale yellow to yellow powder with a melting point between 140-144°C. This product is an efficient photoacid generator for UV-curable systems such as ink, adhesives and photo resists for display materials. 收起 | |
| Photocure TPO | Eutec Chemical Co., Ltd. | Photocure TPO is a clear solution yellow crystalline powder of 2,4,6-trimethylbenzoyldiphenylphosphine oxide with a melting point between 87-93℃. This product is used as an efficient photoinitiator for UV-curable systems. | |
| Photocure TPO-L | Eutec Chemical Co., Ltd. | Photocure TPO-L is a clear solution yellow liquid of Ethyl (2,4,6-trimethylbenzoyl)phenylphosphinate. This product is used as an efficient photoinitiator for UV-curable systems. | |
| Photocure TZT | Eutec Chemical Co., Ltd. | Photocure TZT (2,4,6-Trimethylbenzophenone Methyl benzophenone Benzophenone) is a pale yellow odorless liquid. This product is used as a photoinitiator in UV-cured resins, inks and coatings. | |
| Phthalic Anhydride | Thirumalai Chemicals Ltd | Phthalic Anhydride are white flakes and an aromatic di-carboxylic acid anhydride commonly used in production of alkyd resins for paints, inks and coatings, including lacquers, pigments and varnishes. | |
| Proxel GXL | Gohil Dyechem Corporation | Proxel GXL is a broad spectrum biocide used for the preservation of industrial water-based products against spoilage from bacteria, yeasts and fungi. This brown liquid is effective in synthetic polymer emulsions, emulsion paints, water-based adhesives, pr...展開 Proxel GXL is a broad spectrum biocide used for the preservation of industrial water-based products against spoilage from bacteria, yeasts and fungi. This brown liquid is effective in synthetic polymer emulsions, emulsion paints, water-based adhesives, printing inks, paper coating compositions, and aqueous mineral and pigment slurries. 收起 | |
| Spolostan 3G | Enaspol AS | Spolostan 3G is a sodium salt dispersing agent that is a yellow-brown dust free powder in appearance with a low-molecular condensate that prevents the creation of dye agglomerates and enhances dye penetration, uniform dyeing and color fastness. This produ...展開 Spolostan 3G is a sodium salt dispersing agent that is a yellow-brown dust free powder in appearance with a low-molecular condensate that prevents the creation of dye agglomerates and enhances dye penetration, uniform dyeing and color fastness. This product is commonly applied in dyes, pigments, paints, and coatings. It is also an efficient dispersing agent in the grinding of pigments and printing inks. 收起 | |
| Spolostan 3L | Enaspol AS | Spolostan 3L is a sodium salt dispersing agent that is a dark brown liquid in appearance with a low-molecular condensate that prevents the creation of dye agglomerates and enhances dye penetration, uniform dyeing and color fastness. This product is common...展開 Spolostan 3L is a sodium salt dispersing agent that is a dark brown liquid in appearance with a low-molecular condensate that prevents the creation of dye agglomerates and enhances dye penetration, uniform dyeing and color fastness. This product is commonly applied in dyes, pigments, paints, and coatings. It is also an efficient dispersing agent in the grinding of pigments and printing inks. 收起 | |
| Sylomask | Fuji Silysia Chem. Ltd. | Sylomask is free-flow white powdered micronized silica for use in various types of paint systems. It has optimum average particle size and distribution for easy dispersion to any paint systems.Sylomask brings better results on remarkable anti-corrosive ef...展開 Sylomask is free-flow white powdered micronized silica for use in various types of paint systems. It has optimum average particle size and distribution for easy dispersion to any paint systems.Sylomask brings better results on remarkable anti-corrosive effects than conventional anti-corrosive pigments, and the effects last longer period. There are no physical alterations on a painted film surface, because of Sylomask functioning by ion exchange to show anti-corrosive effect. Sylomask is applied to paint, ink and topcoat systems. 收起 | |
| Sylophobic | Fuji Silysia Chem. Ltd. | Sylophobic demonstrates completely hydrophobic properties by way of chemically replacing the silanol groups on the silica surface with organic silicone compounds. Although Sylophobic is treated for hydrophobic properties on the silica surface, each grade ...展開 Sylophobic demonstrates completely hydrophobic properties by way of chemically replacing the silanol groups on the silica surface with organic silicone compounds. Although Sylophobic is treated for hydrophobic properties on the silica surface, each grade includes large surface area excellent dispersion and high oil absorptivity. Sylophobic is a product that is used in paint and anti-blocking in plastics. It is applicable in ink and paper for printing as well as adhesives. 收起 | |
| Sylosphere | Fuji Silysia Chem. Ltd. | Sylosphere is a fine powdered silica used as a matting agent in paints and an anti-blocking additive in plastics and has been used under the name of Sylysia for years. Furthermore, as in Sylysia, the adsorptive nature, viscosity, holding characteristics, ...展開 Sylosphere is a fine powdered silica used as a matting agent in paints and an anti-blocking additive in plastics and has been used under the name of Sylysia for years. Furthermore, as in Sylysia, the adsorptive nature, viscosity, holding characteristics, and dispersivity characteristics are also found in Sylosphere. Sylosphere is used in plastics, paper and ink, in paints, and in cosmetics and perfume. 收起 | |
| Sylysia | Fuji Silysia Chem. Ltd. | Sylysia is characterized by large internal surface area with a large number of pores, forming a three dimensional structure by the silicate. These properties are precisely controlled to meet a wide variety of applications. Sylysia has applications in resi...展開 Sylysia is characterized by large internal surface area with a large number of pores, forming a three dimensional structure by the silicate. These properties are precisely controlled to meet a wide variety of applications. Sylysia has applications in resin and water-based paints, inks, plastic films, pharmaceuticals & cosmetics, adhesives, as well as sensitized, electrostatic recording, and impact paper. 收起 | |
| Verdcol® BML Carmine 176 T | Verdcol Ltd | Verdcol® BML Carmine 176 T is a transparent and blue shade red pigment with good fastness. This product has an oil absorption of 77-82 g/100g and a density of 1.4-1.5 g/cm3. It is used in both water and solvent based inks. | |
| Verdcol® BML Carmine 185 2T | Verdcol Ltd | Verdcol® BML Carmine 185 2T is a transparent and blue shade red pigment with good fastness. This product has an oil absorption of 85-90 g/100g and a density of 1.4-1.5 g/cm3. It is primarily used in water based inks and with limited suitability in solvent...展開 Verdcol® BML Carmine 185 2T is a transparent and blue shade red pigment with good fastness. This product has an oil absorption of 85-90 g/100g and a density of 1.4-1.5 g/cm3. It is primarily used in water based inks and with limited suitability in solvent based inks. 收起 | |
| Verdcol® BML Yellow 180 3T | Verdcol Ltd | Verdcol® BML Yellow 180 3T is a green shade and highly transparent yellow pigment with good fastness. This product has an oil absorption of 80-85 g/100g and a density of 1.4-1.5 g/cm3. It is primarily used in water based inks and with a limited suitabilit...展開 Verdcol® BML Yellow 180 3T is a green shade and highly transparent yellow pigment with good fastness. This product has an oil absorption of 80-85 g/100g and a density of 1.4-1.5 g/cm3. It is primarily used in water based inks and with a limited suitability in solvent based inks. 收起 | |
| Verdcol® BML Yellow 180 T | Verdcol Ltd | Verdcol® BML Yellow 180 T is a mid-green shade and semi-opaque yellow pigment with good fastness. This product has an oil absorption of 75-80 g/100g and a density of 1.4-1.5 g/cm3. It is primarily used in water based inks. | |
| Verdcol® DL Yellow 12 S | Verdcol Ltd | Verdcol® DL Yellow 12 S is a mid-red shade yellow pigment with high gloss and transparency. This product has an oil absorption of <55 g/100g and a density of 1.4-1.6 g/cm3. It is primarily used in solvent based inks. | |
| Verdcol® DL Yellow 13 GP | Verdcol Ltd | Verdcol® DL Yellow 13 GP is a mid shade yellow pigment. This product has an oil absorption of <55 g/100g and a density of 1.3-1.5 g/cm3. It can be used in solvent based inks. | |
| Verdcol® DL Yellow 13 S | Verdcol Ltd | Verdcol® DL Yellow 13 S is a mid shade yellow pigment with high gloss and transparency. This product has an oil absorption of <50 g/100g and a density of 1.3-1.5 g/cm3. It is primarily used in solvent based inks. | |
| Verdcol® DL Yellow 14 GP | Verdcol Ltd | Verdcol® DL Yellow 14 GP is a mid-green shade yellow pigment. This product has an oil absorption of <40 g/100g and a density of 1.5-1.7 g/cm3. It can be used in water based inks and solvent based inks. | |
| Verdcol® DL Yellow 14 S | Verdcol Ltd | Verdcol® DL Yellow 14 S is a mid-green shade yellow pigment with high gloss and transparency. This product has an oil absorption of <40 g/100g and a density of 1.5-1.7 g/cm3. It is primarily used in solvent based inks. | |
| Verdcol® DL Yellow 14 SWK | Verdcol Ltd | Verdcol® DL Yellow 14 SWK is a mid-green shade yellow pigment with good transparency and gloss. This product has an oil absorption of <40 g/100g and a density of 1.5-1.7 g/cm3. It is primarily used in solvent based inks. | |
| Verdcol® DL Yellow 17 S | Verdcol Ltd | Verdcol® DL Yellow 17 S is a green shade yellow pigment with good gloss and transparency. This product has an oil absorption of <55 g/100g and a density of 1.4-1.6 g/cm3. It is primarily used in solvent based inks. | |
| Verdcol® DL Yellow 83 S | Verdcol Ltd | Verdcol® DL Yellow 83 S is a strong red shade yellow pigment with good gloss and flow. This product has an oil absorption of <45 g/100g and a density of 1.4-1.6 g/cm3. It is primarily used in solvent based inks. | |
| Verdcol® DPP Red 254 PTR | Verdcol Ltd | Verdcol® DPP Red 254 PTR is a bright and highly saturated mid shade red pigment with good fastness. This product has an oil absorption of 45-50 g/100g and a density of 1.5-1.6 g/cm3. It can be used in automotive coatings, industrial coatings, decorative c...展開 Verdcol® DPP Red 254 PTR is a bright and highly saturated mid shade red pigment with good fastness. This product has an oil absorption of 45-50 g/100g and a density of 1.5-1.6 g/cm3. It can be used in automotive coatings, industrial coatings, decorative coatings, powder coatings, water based inks, and solvent based inks. 收起 | |
| Verdcol® Pink 122 GP | Verdcol Ltd | Verdcol® Pink 122 GP is a blue shade red pigment with high gloss and transparency and excellent fastness. This product has an oil absorption of 60-65 g/100g and a density of 1.4-1.5 g/cm3. It can be used in automotive coatings, powder coatings, industrial...展開 Verdcol® Pink 122 GP is a blue shade red pigment with high gloss and transparency and excellent fastness. This product has an oil absorption of 60-65 g/100g and a density of 1.4-1.5 g/cm3. It can be used in automotive coatings, powder coatings, industrial coatings, water based inks, and solvent based inks. 收起 | |
| Verdcol® Red 169 W | Verdcol Ltd | Verdcol® Red 169 W is a bright pink pigment with high transparency. This product has an oil absorption of 100-105 g/100g and a density of 1.4-1.5 g/cm3. It is primarily used in water based inks. | |
| Verdcol® Red 81 S | Verdcol Ltd | Verdcol® Red 81 S is a bright pink color with good transparency and gloss. This product has an oil absorption of 85-95 g/100g and a density of 1.8-1.9 g/cm3. It is primarily used in solvent based inks. | |
| Verdcol® Red 81 W | Verdcol Ltd | Verdcol® Red 81 W is a bright pink pigment with good transparency and gloss. This product has an oil absorption of 85-95 g/100g and a density of 1.8-1.9 g/cm3. It is primarily used in water based inks. | |
| Verdcol® Violet 27 W | Verdcol Ltd | Verdcol® Violet 27 W is an economical pigment with good flow stability. This product has an oil absorption of 45-55 g/100g and a density of 1.6-1.7 g/cm3. It is primarily used in water based inks. |
