Biocel SP/SG 85 | Gohil Dyechem Corporation | Biocel SP/SG 85 is a light brown, granular powder used in the preservation of wood. It is used as an industrial fungicide in paints and adhesives. | |
JMT-150ANO | Tayca Corporation | JMT-150ANO is a cationic titanium dioxide with an average primary particle size of 15 nm. It is surface treated with alkylsilane, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
JMT-150AO | Tayca Corporation | JMT-150AO is an anionic titanium dioxide with an average primary particle size of 15 nm. It is surface treated with alkylsilane, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
JMT-150FI | Tayca Corporation | JMT-150FI is an anionic titanium dioxide with an average primary particle size of 15 nm. It is surface treated with alkylsilane, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
JMT-150IB | Tayca Corporation | JMT-150IB is an anionic titanium dioxide with an average primary particle size of 15 nm. It is surface treated with alkylsilane, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
JR-800 | Tayca Corporation | JR-800 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for inks that are applied to automobiles, household products and other white-colored products. It contains aluminum and silicon with an average .27...展開 JR-800 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for inks that are applied to automobiles, household products and other white-colored products. It contains aluminum and silicon with an average .27µm particle size and 29 g/100g of oil absorption. 收起 | |
JR-805 | Tayca Corporation | JR-805 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for inks that are applied to automobiles, household products and other white-colored products. It contains aluminum and silicon with an average .29...展開 JR-805 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for inks that are applied to automobiles, household products and other white-colored products. It contains aluminum and silicon with an average .29µm particle size and 22 g/100g of oil absorption. 收起 | |
JR-806 | Tayca Corporation | JR-806 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for inks that are applied to automobiles, household products and other white-colored products. It contains aluminum and silicon with an average .25...展開 JR-806 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for inks that are applied to automobiles, household products and other white-colored products. It contains aluminum and silicon with an average .25µm particle size and 21 g/100g of oil absorption. 收起 | |
K-White #105 | Tayca Corporation | K-White #105 is a white powder aluminum triphosphate with an average particle size of 1.6 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent...展開 K-White #105 is a white powder aluminum triphosphate with an average particle size of 1.6 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
K-White #140W | Tayca Corporation | K-White #140W is a white powder aluminum triphosphate with an average particle size of 2.7 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solven...展開 K-White #140W is a white powder aluminum triphosphate with an average particle size of 2.7 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
K-White #450H | Tayca Corporation | K-White #450H is a white powder aluminum triphosphate with an average particle size of 3.5 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solven...展開 K-White #450H is a white powder aluminum triphosphate with an average particle size of 3.5 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
K-White #82 | Tayca Corporation | K-White #82 is a white powder aluminum triphosphate with an average particle size of 3.5 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent-...展開 K-White #82 is a white powder aluminum triphosphate with an average particle size of 3.5 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
K-White #84 | Tayca Corporation | K-White #84 is a white powder aluminum triphosphate with an average particle size of 3.7 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent-...展開 K-White #84 is a white powder aluminum triphosphate with an average particle size of 3.7 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
K-White #84S | Tayca Corporation | K-White #84S is a white powder aluminum triphosphate with an average particle size of 3.7 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent...展開 K-White #84S is a white powder aluminum triphosphate with an average particle size of 3.7 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
K-White #85 | Tayca Corporation | K-White #85 is a white powder aluminum triphosphate with an average particle size of 3.7 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent-...展開 K-White #85 is a white powder aluminum triphosphate with an average particle size of 3.7 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
K-White #94 | Tayca Corporation | K-White #94 is a white powder aluminum triphosphate with an average particle size of 6.3 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent-...展開 K-White #94 is a white powder aluminum triphosphate with an average particle size of 6.3 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
K-White Ca650 | Tayca Corporation | K-White Ca650 is a white powder aluminum triphosphate with an average particle size of 3.5 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solven...展開 K-White Ca650 is a white powder aluminum triphosphate with an average particle size of 3.5 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
K-White G105 | Tayca Corporation | K-White G105 is a white powder aluminum triphosphate with an average particle size of 2.3 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent...展開 K-White G105 is a white powder aluminum triphosphate with an average particle size of 2.3 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
MSN-002 | Tayca Corporation | MSN-002 is an anionic silica dioxide with an average primary particle size of 16 nm. It is surface treated with alkylsilane and silicone oil, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
MSN-003 | Tayca Corporation | MSN-003 is an anionic silica dioxide with an average primary particle size of 16 nm. It is surface treated with alkylsilane and silicone oil, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
MSN-007 | Tayca Corporation | MSN-007 is an anionic silica dioxide with an average primary particle size of 16 nm. It is surface treated with alkylsilane, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
MSP-001 | Tayca Corporation | MSP-001 is a cationic silica dioxide with an average primary particle size of 16 nm. It is surface treated with alkylsilane and silicone oil, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
MSP-005 | Tayca Corporation | MSP-005 is a cationic silica dioxide with an average primary particle size of 16 nm. It is surface treated with alkylsilane and silicone oil, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
MSP-009 | Tayca Corporation | MSP-009 is a cationic silica dioxide with an average primary particle size of 80 nm. It is surface treated with alkylsilane and silicone oil, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
MSP-012 | Tayca Corporation | MSP-012 is a cationic silica dioxide with an average primary particle size of 16 nm. It is surface treated with alkylsilane and silicone oil, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
MT-01 | Tayca Corporation | MT-01 is a micro titanium dioxide (10nm) that contains aluminum and stearic acid and can be used in pigments, paints and inks to provide water repellency, transparency and dispersibility. | |
MT-05 | Tayca Corporation | MT-05 is a micro titanium dioxide (10nm) that contains aluminum and silicon and can be used in pigments, paints and inks to provide water repellency, transparency and low activity. | |
MT-100AQ | Tayca Corporation | MT-100AQ is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with silicon, aluminum and sodium alginate. It exhibits good stability, water affinity and dispersibility in applications such as paints,...展開 MT-100AQ is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with silicon, aluminum and sodium alginate. It exhibits good stability, water affinity and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
MT-100HD | Tayca Corporation | MT-100HD is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with zirconium and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and elec...展開 MT-100HD is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with zirconium and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
MT-100S | Tayca Corporation | MT-100S is a micro titanium dioxide (15nm) that contains aluminum and lauric acid and can be used in pigments, paints and inks to provide water repellency, lipophilic characteristics and affinity with resin. | |
MT-100SA | Tayca Corporation | MT-100SA is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with silicon and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and electr...展開 MT-100SA is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with silicon and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
MT-100WP | Tayca Corporation | MT-100WP is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with silicon. It exhibits good water affinity, compatibility with water-soluble thickening agents and dispersibility in applications such...展開 MT-100WP is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with silicon. It exhibits good water affinity, compatibility with water-soluble thickening agents and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
MT-100Z | Tayca Corporation | MT-100Z is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with aluminum and stearic acid. It exhibits good transparency, water repellency and dispersibility in applications such as paints, inks an...展開 MT-100Z is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with aluminum and stearic acid. It exhibits good transparency, water repellency and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
MT-10EX | Tayca Corporation | MT-10EX is a micro titanium dioxide (10nm) that contains aluminum and isostearic acid and can be used in pigments, paints and inks to provide transparency, dispersibility and low viscosity when dispersed in oil phase. | |
MT-150A | Tayca Corporation | MT-150A is an unprocessed titanium dioxide with an average primary particle size of 15 nm. It is suitable for use as a colorant in paints, inks and electrophotography. | |
MT-150EX | Tayca Corporation | MT-150EX is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with aluminum and isostearic acid. It exhibits good transparency, water repellency and dispersibility in applications such as paints, ink...展開 MT-150EX is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with aluminum and isostearic acid. It exhibits good transparency, water repellency and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
MT-150W | Tayca Corporation | MT-150W is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with sodium metaphosphate. It exhibits good transparency and dispersibility in applications such as paints, inks and electrophotography. | |
MT-300HD | Tayca Corporation | MT-300HD is a micro-fine titanium dioxide with an average primary particle size of 25 nm. It has been surface treated with zirconium and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and elec...展開 MT-300HD is a micro-fine titanium dioxide with an average primary particle size of 25 nm. It has been surface treated with zirconium and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
MT-500B | Tayca Corporation | MT-500B is an unprocessed titanium dioxide with an average primary particle size of 35 nm. It is suitable for use as a colorant in paints, inks and electrophotography. | |
MT-500HD | Tayca Corporation | MT-500HD is a micro-fine titanium dioxide with an average primary particle size of 30 nm. It has been surface treated with zirconium and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and elec...展開 MT-500HD is a micro-fine titanium dioxide with an average primary particle size of 30 nm. It has been surface treated with zirconium and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
MT-500SA | Tayca Corporation | MT-500SA is a titanium dioxide with an average primary particle size of 35 nm. It has been surface treated with silicon and aluminum, making it suitable for applications requiring good outdoor weather resistance. It is suitable for use as a colorant in pa...展開 MT-500SA is a titanium dioxide with an average primary particle size of 35 nm. It has been surface treated with silicon and aluminum, making it suitable for applications requiring good outdoor weather resistance. It is suitable for use as a colorant in paints, inks and electrophotography. 收起 | |
MT-500SAS | Tayca Corporation | MT-500SAS is a titanium dioxide with an average primary particle size of 30 nm. It has been surface treated with silicone oil, silicon and aluminum, making it suitable for applications requiring good outdoor weather resistance and water repellency. It is ...展開 MT-500SAS is a titanium dioxide with an average primary particle size of 30 nm. It has been surface treated with silicone oil, silicon and aluminum, making it suitable for applications requiring good outdoor weather resistance and water repellency. It is suitable for use as a colorant in paints, inks and electrophotography. 收起 | |
MT-600B | Tayca Corporation | MT-600B is an unprocessed titanium dioxide with an average primary particle size of 50 nm. It is suitable for use as a colorant in paints, inks and electrophotography. | |
MT-600SA | Tayca Corporation | MT-600SA is a titanium dioxide with an average primary particle size of 50 nm. It has been surface treated with silicon and aluminum, making it suitable for applications requiring good outdoor weather resistance. It is suitable for use as a colorant in pa...展開 MT-600SA is a titanium dioxide with an average primary particle size of 50 nm. It has been surface treated with silicon and aluminum, making it suitable for applications requiring good outdoor weather resistance. It is suitable for use as a colorant in paints, inks and electrophotography. 收起 | |
MT-700B | Tayca Corporation | MT-700B is an unprocessed titanium dioxide with an average primary particle size of 80 nm. It is suitable for use as a colorant in paints, inks and electrophotography in applications where good UV-A scattering efficiency is desired. | |
MT-700HD | Tayca Corporation | MT-700HD is a micro-fine titanium dioxide with an average primary particle size of 50 nm. It has been surface treated with zirconium and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and elec...展開 MT-700HD is a micro-fine titanium dioxide with an average primary particle size of 50 nm. It has been surface treated with zirconium and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
MTD100 | Guangxi Zhongchang Resin Co., Ltd. | MTD100 is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifying...展開 MTD100 is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifying and a softening point between 90-100ºC. It can also be applied to coating and printing ink. 收起 | |
MTD100W | Guangxi Zhongchang Resin Co., Ltd. | MTD100W is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifyin...展開 MTD100W is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifying and a softening point between 90-100ºC. It can also be applied to coating and printing ink. 收起 | |
MTD120 | Guangxi Zhongchang Resin Co., Ltd. | MTD120 is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifying...展開 MTD120 is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifying and a softening point between 120-130ºC. It can also be applied to coating and printing ink. 收起 | |
MTD120W | Guangxi Zhongchang Resin Co., Ltd. | MTD120W is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifyin...展開 MTD120W is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifying and a softening point between 120-130ºC. It can also be applied to coating and printing ink. 收起 | |
MTD150 | Guangxi Zhongchang Resin Co., Ltd. | MTD150 is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifying...展開 MTD150 is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifying and a softening point between 145-160ºC. It can also be applied to coating and printing ink. 收起 | |
MTD150W | Guangxi Zhongchang Resin Co., Ltd. | MTD150W is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifyin...展開 MTD150W is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifying and a softening point between 145-160ºC. It can also be applied to coating and printing ink. 收起 | |
MTY-02 | Tayca Corporation | MTY-02 is a micro-fine titanium dioxide with an average primary particle size of 10 nm. It has been surface treated with aluminum, silicon and silicone oil. It exhibits good transparency, water repellency and dispersibility in applications such as paints,...展開 MTY-02 is a micro-fine titanium dioxide with an average primary particle size of 10 nm. It has been surface treated with aluminum, silicon and silicone oil. It exhibits good transparency, water repellency and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
MTY-110M3S | Tayca Corporation | MTY-110M3S is a micro-fine, low viscosity titanium dioxide with an average primary particle size of 10 nm. It has been surface treated with aluminum, silicon and silicone oil. It exhibits good water repellency, transparency and dispersibility in applicati...展開 MTY-110M3S is a micro-fine, low viscosity titanium dioxide with an average primary particle size of 10 nm. It has been surface treated with aluminum, silicon and silicone oil. It exhibits good water repellency, transparency and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
MTY-150ANO | Tayca Corporation | MTY-150ANO is a cationic titanium dioxide with an average primary particle size of 15 nm. It is surface treated with alkylsilane, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
MTY-150AO | Tayca Corporation | MTY-150AO is an anionic titanium dioxide with an average primary particle size of 15 nm. It is surface treated with alkylsilane, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
MTY-150FI | Tayca Corporation | MTY-150FI is an anionic titanium dioxide with an average primary particle size of 15 nm. It is surface treated with alkylsilane, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
MTY-150IB | Tayca Corporation | MTY-150IB is an anionic titanium dioxide with an average primary particle size of 15 nm. It is surface treated with alkylsilane, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
MTY-700BS | Tayca Corporation | MTY-700BS is a titanium dioxide with an average primary particle size of 80 nm. It is surface treated with silicone oil, making it suitable for use as a colorant in paints, inks and electrophotography in applications where good UV-A scattering efficiency ...展開 MTY-700BS is a titanium dioxide with an average primary particle size of 80 nm. It is surface treated with silicone oil, making it suitable for use as a colorant in paints, inks and electrophotography in applications where good UV-A scattering efficiency and water repellency is desired. 收起 | |
MZ-300 | Tayca Corporation | MZ-300 is an untreated micro-fine zinc dioxide with an average primary particle size of 35 nm. It exhibits good transparency and UV-A shielding properties in formulations for paints and inks. | |
MZ-306X | Tayca Corporation | MZ-306X is a silicone oil treated, micro-fine zinc dioxide with an average primary particle size of 35 nm. It exhibits good transparency, water repellency, dispersibility and UV-A shielding properties in formulations for paints and inks. | |
MZ-500 | Tayca Corporation | MZ-500 is an untreated micro-fine zinc dioxide with an average primary particle size of 25 nm. It exhibits very good transparency in formulations for paints and inks. | |
MZ-506X | Tayca Corporation | MZ-506X is a silicone oil treated, micro-fine zinc dioxide with an average primary particle size of 25 nm. It exhibits good water repellency, dispersal and transparency properties in formulations for paints and inks. | |
MZ-510HPSX | Tayca Corporation | MZ-510HPSX is a silica and silicone oil treated, micro-fine zinc dioxide with an average primary particle size of 25 nm. It exhibits very good transparency and good light resistance in formulations for paints and inks. | |
MZY-303S | Tayca Corporation | MZY-303S is a silicone oil treated, micro-fine zinc dioxide with an average primary particle size of 35 nm. It exhibits good water repellency, transparency and UV-A shielding properties in formulations for paints and inks. | |
MZY-505S | Tayca Corporation | MZY-505S is a silicone oil treated, micro-fine zinc dioxide with an average primary particle size of 25 nm. It exhibits good water repellency and transparency properties in formulations for paints and inks. | |
MZY-510M3S | Tayca Corporation | MZY-510M3S is a low viscosity, silicone oil treated, micro-fine zinc dioxide with an average primary particle size of 25 nm. It exhibits very good transparency in formulations for paints and inks. | |
Phthalic Anhydride | Thirumalai Chemicals Ltd | Phthalic Anhydride are white flakes and an aromatic di-carboxylic acid anhydride commonly used in production of alkyd resins for paints, inks and coatings, including lacquers, pigments and varnishes. | |
Proxel GXL | Gohil Dyechem Corporation | Proxel GXL is a broad spectrum biocide used for the preservation of industrial water-based products against spoilage from bacteria, yeasts and fungi. This brown liquid is effective in synthetic polymer emulsions, emulsion paints, water-based adhesives, pr...展開 Proxel GXL is a broad spectrum biocide used for the preservation of industrial water-based products against spoilage from bacteria, yeasts and fungi. This brown liquid is effective in synthetic polymer emulsions, emulsion paints, water-based adhesives, printing inks, paper coating compositions, and aqueous mineral and pigment slurries. 收起 | |
RA100 | Guangxi Zhongchang Resin Co., Ltd. | RA100 is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesiv...展開 RA100 is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink, paints and electronic flux. It contains a softening point of less than or equal to 100ºC and an acid number less than or equal to 190 mgKOH/g. 收起 | |
RA100W | Guangxi Zhongchang Resin Co., Ltd. | RA100W is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesi...展開 RA100W is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink, paints and electronic flux. It contains a softening point of less than or equal to 100ºC and an acid number less than or equal to 190 mgKOH/g. 收起 | |
RA120 | Guangxi Zhongchang Resin Co., Ltd. | RA120 is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesiv...展開 RA120 is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink, paints and electronic flux. It contains a softening point of less than or equal to 120ºC and an acid number less than or equal to 210 mgKOH/g. 收起 | |
RA120W | Guangxi Zhongchang Resin Co., Ltd. | RA120W is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesi...展開 RA120W is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink, paints and electronic flux. It contains a softening point of less than or equal to 120ºC and an acid number less than or equal to 210 mgKOH/g. 收起 | |
RA140 | Guangxi Zhongchang Resin Co., Ltd. | RA140 is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesiv...展開 RA140 is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink, paints and electronic flux. It contains a softening point of less than or equal to 140ºC and an acid number less than or equal to 145 mgKOH/g. 收起 | |
RA140W | Guangxi Zhongchang Resin Co., Ltd. | RA140W is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesi...展開 RA140W is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink, paints and electronic flux. It contains a softening point of less than or equal to 140ºC and an acid number less than or equal to 145 mgKOH/g. 收起 | |
RA90 | Guangxi Zhongchang Resin Co., Ltd. | RA90 is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesive...展開 RA90 is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink, paints and electronic flux. It contains a softening point of less than or equal to 90ºC and an acid number less than or equal to 180 mgKOH/g. 收起 | |
RA90W | Guangxi Zhongchang Resin Co., Ltd. | RA90W is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesiv...展開 RA90W is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink, paints and electronic flux. It contains a softening point of less than or equal to 90ºC and an acid number less than or equal to 180 mgKOH/g. 收起 | |
RGM128 | Guangxi Zhongchang Resin Co., Ltd. | RGM128 is a light yellow flaky solid and a maleic modified glycerine ester of gum rosin created to provide aliphatic compatibility in ink or oil paint formulations. The solubility of this solid makes it a good coresin for adjusting solubility paremeters i...展開 RGM128 is a light yellow flaky solid and a maleic modified glycerine ester of gum rosin created to provide aliphatic compatibility in ink or oil paint formulations. The solubility of this solid makes it a good coresin for adjusting solubility paremeters in lithographic inks and varnishes in addition to pigment wetting for use in economical flushing varnishes for heatset and sheetfed flushes. It contains a softening point between 125-131ºC. 收起 | |
RGM128W | Guangxi Zhongchang Resin Co., Ltd. | RGM128W is a light yellow flaky solid and a maleic modified glycerine ester of gum rosin created to provide aliphatic compatibility in ink or oil paint formulations. The solubility of this solid makes it a good coresin for adjusting solubility paremeters ...展開 RGM128W is a light yellow flaky solid and a maleic modified glycerine ester of gum rosin created to provide aliphatic compatibility in ink or oil paint formulations. The solubility of this solid makes it a good coresin for adjusting solubility paremeters in lithographic inks and varnishes in addition to pigment wetting for use in economical flushing varnishes for heatset and sheetfed flushes. It contains a softening point between 125-131ºC. 收起 | |
RGM135 | Guangxi Zhongchang Resin Co., Ltd. | RGM135 is a light yellow flaky solid and a maleic modified glycerine ester of gum rosin created to provide aliphatic compatibility in ink or oil paint formulations. The solubility of this solid makes it a good coresin for adjusting solubility paremeters i...展開 RGM135 is a light yellow flaky solid and a maleic modified glycerine ester of gum rosin created to provide aliphatic compatibility in ink or oil paint formulations. The solubility of this solid makes it a good coresin for adjusting solubility paremeters in lithographic inks and varnishes in addition to pigment wetting for use in economical flushing varnishes for heatset and sheetfed flushes. It contains a softening point between 131-138ºC. 收起 | |
RGM135W | Guangxi Zhongchang Resin Co., Ltd. | RGM135W is a light yellow flaky solid and a maleic modified glycerine ester of gum rosin created to provide aliphatic compatibility in ink or oil paint formulations. The solubility of this solid makes it a good coresin for adjusting solubility paremeters ...展開 RGM135W is a light yellow flaky solid and a maleic modified glycerine ester of gum rosin created to provide aliphatic compatibility in ink or oil paint formulations. The solubility of this solid makes it a good coresin for adjusting solubility paremeters in lithographic inks and varnishes in addition to pigment wetting for use in economical flushing varnishes for heatset and sheetfed flushes. It contains a softening point between 131-138ºC. 收起 | |
Rosin Modified Phenolic Resin - 2112 | Guangxi Zhongchang Resin Co., Ltd. | Rosin Modified Phenolic Resin - 2112 is a product of esterification derived from glycerol (or pentaerythrite) with the polycondensate of rosin. This product has a softening point less than or equal to 135ºC and an acid number less than or equal to 20. It ...展開 Rosin Modified Phenolic Resin - 2112 is a product of esterification derived from glycerol (or pentaerythrite) with the polycondensate of rosin. This product has a softening point less than or equal to 135ºC and an acid number less than or equal to 20. It is soluble in hydrocarbon, aroma, ester, ketone, benzine, benzene, ethyl benzine, spirit and turpentine for use in paint, printing ink and adhesives. 收起 | |
Rosin Modified Phenolic Resin - 2116 | Guangxi Zhongchang Resin Co., Ltd. | Rosin Modified Phenolic Resin - 2116 is a product of esterification derived from glycerol (or pentaerythrite) with the polycondensate of rosin. This product has a softening point less than 151ºC and an acid number less than or equal to 18. It is soluble i...展開 Rosin Modified Phenolic Resin - 2116 is a product of esterification derived from glycerol (or pentaerythrite) with the polycondensate of rosin. This product has a softening point less than 151ºC and an acid number less than or equal to 18. It is soluble in hydrocarbon, aroma, ester, ketone, benzine, benzene, ethyl benzine, spirit and turpentine for use in paint, printing ink and adhesives. 收起 | |
Rosin Modified Phenolic Resin - 2118 | Guangxi Zhongchang Resin Co., Ltd. | Rosin Modified Phenolic Resin - 2118 is a product of esterification derived from glycerol (or pentaerythrite) with the polycondensate of rosin. This product has a softening point less than 157ºC and an acid number less than or equal to 20. It is soluble i...展開 Rosin Modified Phenolic Resin - 2118 is a product of esterification derived from glycerol (or pentaerythrite) with the polycondensate of rosin. This product has a softening point less than 157ºC and an acid number less than or equal to 20. It is soluble in hydrocarbon, aroma, ester, ketone, benzine, benzene, ethyl benzine, spirit and turpentine for use in paint, printing ink and adhesives. 收起 | |
RPF100 | Guangxi Zhongchang Resin Co., Ltd. | RPF100 is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 97-103ºC, a gardner color of less than four and an acid number less than or equal to 20 mgKOH/g. It provides dissolvability in low ...展開 RPF100 is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 97-103ºC, a gardner color of less than four and an acid number less than or equal to 20 mgKOH/g. It provides dissolvability in low carbon alcohol, light color aging resistance and light resistance that is widely used in alcohol soluble and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink and electronic flux. 收起 | |
RPF100A | Guangxi Zhongchang Resin Co., Ltd. | RPF100A is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 97-103ºC, a gardner color of less than four and an acid number less than or equal to 30 mgKOH/g. It provides dissolvability in low...展開 RPF100A is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 97-103ºC, a gardner color of less than four and an acid number less than or equal to 30 mgKOH/g. It provides dissolvability in low carbon alcohol, light color aging resistance and light resistance that is widely used in alcohol soluble and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink and electronic flux. 收起 | |
RPF100B | Guangxi Zhongchang Resin Co., Ltd. | RPF100B is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 97-103ºC, a gardner color of less than five and an acid number less than or equal to 40 mgKOH/g. It provides dissolvability in low...展開 RPF100B is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 97-103ºC, a gardner color of less than five and an acid number less than or equal to 40 mgKOH/g. It provides dissolvability in low carbon alcohol, light color aging resistance and light resistance that is widely used in alcohol soluble and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink and electronic flux. 收起 | |
RPF100W | Guangxi Zhongchang Resin Co., Ltd. | RPF100W is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 97-103ºC, a gardner color of less than one and an acid number less than or equal to 25 mgKOH/g. It provides dissolvability in low ...展開 RPF100W is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 97-103ºC, a gardner color of less than one and an acid number less than or equal to 25 mgKOH/g. It provides dissolvability in low carbon alcohol, light color aging resistance and light resistance that is widely used in alcohol soluble and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink and electronic flux. 收起 | |
RPF90 | Guangxi Zhongchang Resin Co., Ltd. | RPF90 is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 87-93ºC, a gardner color of less than four and an acid number less than or equal to 20 mgKOH/g. It provides dissolvability in low ca...展開 RPF90 is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 87-93ºC, a gardner color of less than four and an acid number less than or equal to 20 mgKOH/g. It provides dissolvability in low carbon alcohol, light color aging resistance and light resistance that is widely used in alcohol soluble and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink and electronic flux. 收起 | |
RPF90W | Guangxi Zhongchang Resin Co., Ltd. | RPF90W is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 87-93ºC, a gardner color of less than one and an acid number less than or equal to 25 mgKOH/g. It provides dissolvability in low ca...展開 RPF90W is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 87-93ºC, a gardner color of less than one and an acid number less than or equal to 25 mgKOH/g. It provides dissolvability in low carbon alcohol, light color aging resistance and light resistance that is widely used in alcohol soluble and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink and electronic flux. 收起 | |
Spolostan 3G | Enaspol AS | Spolostan 3G is a sodium salt dispersing agent that is a yellow-brown dust free powder in appearance with a low-molecular condensate that prevents the creation of dye agglomerates and enhances dye penetration, uniform dyeing and color fastness. This produ...展開 Spolostan 3G is a sodium salt dispersing agent that is a yellow-brown dust free powder in appearance with a low-molecular condensate that prevents the creation of dye agglomerates and enhances dye penetration, uniform dyeing and color fastness. This product is commonly applied in dyes, pigments, paints, and coatings. It is also an efficient dispersing agent in the grinding of pigments and printing inks. 收起 | |
Spolostan 3L | Enaspol AS | Spolostan 3L is a sodium salt dispersing agent that is a dark brown liquid in appearance with a low-molecular condensate that prevents the creation of dye agglomerates and enhances dye penetration, uniform dyeing and color fastness. This product is common...展開 Spolostan 3L is a sodium salt dispersing agent that is a dark brown liquid in appearance with a low-molecular condensate that prevents the creation of dye agglomerates and enhances dye penetration, uniform dyeing and color fastness. This product is commonly applied in dyes, pigments, paints, and coatings. It is also an efficient dispersing agent in the grinding of pigments and printing inks. 收起 |