| Biocel SP/SG 85 | Gohil Dyechem Corporation | Biocel SP/SG 85 is a light brown, granular powder used in the preservation of wood. It is used as an industrial fungicide in paints and adhesives. | |
| BT-B101 BRONOPOL | BioTio Group | BT-B101 BRONOPOL is a white crystalline powder that has a melting point of 126-131°C and a pH value of 5.0-7.0. This product is most commonly used as a broad-spectrum antimicrobial agent in coatings, paints, inks, and adhesive applications. | |
| BT-IN603 DTSA | BioTio Group | BT-IN603 DTSA is an off-white to light yellow powder that has a melting point of 280-290°C and a moisture content of ≤0.10%. This product is most commonly used as a chemical intermediate in dyes and biocides. | |
| BT-IN604 DCPI | BioTio Group | BT-IN604 DCPI is a white crystalline powder that has a content/assay of ≥98% and other isocyanate content of ≤1.0%. This product is most commonly used as an intermediate for the production of dyes. | |
| EXOCOAT™ AM | Axcentive Sarl | EXOCOAT® AM by Axcentive is a water-based, doped nano-titanium oxide sol with a strong antimicrobial effect and anatase structure. It prevents the build-up of microbes as the photocatalytic effect results in effective radical formation which breaks down v...展開 EXOCOAT® AM by Axcentive is a water-based, doped nano-titanium oxide sol with a strong antimicrobial effect and anatase structure. It prevents the build-up of microbes as the photocatalytic effect results in effective radical formation which breaks down viruses and bacteria. It eradicates viruses such as influenza, SARS-COV-2, dengue & hepatitis and bacteria such as E. coli, MSRA, streptococcus, listeria, pneumonia, and salmonella. It is activated by light and displays quick drying at room temperature. Spray application is recommended to reach thin monolayers. It exhibits curing at room temperature up to 300°C and super hard particles (1GPa Vickers). It is easy to apply & durable, allowing longer disinfection intervals while preserving hygiene level. It shows non-silver leaching, efficacious even under low light conditions, lower service frequency, and no need for frequent disinfection routine. It is used in the state-of-the-art continuous antimicrobial coating for high-traffic areas. EXOCOAT® AM is suitable for topcoats for any surface inside buildings, stores, hospitals, and vehicles. The shelf life of this product is 9 months. 收起 | |
| Ketjenflex® 12 | Axcentive Sarl | Ketjenflex® 12 is a citrate based clear liquid. It is used as a partially bio-based plasticizer for inks, adhesives, and coatings. Ketjenflex® 12 can be used in vinyl formulations such as PVC plastics, vinyl flooring, solution vinyl resins, wood vinyl com...展開 Ketjenflex® 12 is a citrate based clear liquid. It is used as a partially bio-based plasticizer for inks, adhesives, and coatings. Ketjenflex® 12 can be used in vinyl formulations such as PVC plastics, vinyl flooring, solution vinyl resins, wood vinyl compounds, and PVC based plastisols. It can also be used in PVC based polymers, nitrocellulose resins, and cyanoacrylate adhesives. 收起 | |
| Ketjenflex® 6 | Axcentive Sarl | Ketjenflex® 6 is a toluene sulfonamide in the form of a white crystalline powder. It is used as a plasticizer in inks, adhesives, and coatings. Ketjenflex® 6 can be used with resins such as nitrocellulose, polyamide, PVAC, rosin, epoxy, and more. | |
| Ketjenflex® 8 | Axcentive Sarl | Ketjenflex® 8 is a toluene sulfonamide in the form of a clear, slightly yellow liquid. It is used as a plasticizer and adhesion promoter in inks, adhesives, and coatings. Ketjenflex® 8 can be used with applications such as PVAC, nitrocellulose, powder coa...展開 Ketjenflex® 8 is a toluene sulfonamide in the form of a clear, slightly yellow liquid. It is used as a plasticizer and adhesion promoter in inks, adhesives, and coatings. Ketjenflex® 8 can be used with applications such as PVAC, nitrocellulose, powder coatings, synthetic polyamides, epoxy coatings and adhesives, and more. 收起 | |
| Ketjenflex® CP | Axcentive Sarl | Ketjenflex® CP is a para toluene sulfonic acid in the form of a white crystalline powder. It is used as a strong protonating catalyst. Ketjenflex® CP can be used in acid cured wood coatings. | |
| Ketjenflex® MH | Axcentive Sarl | Ketjenflex® MH is a toluene sulfonamide in the form of a hard, transparent resin. It is used at a plasticizing co-resin in coatings, adhesives, and inks. Ketjenflex® MH can be used in nitrocellulose coatings, epoxy based coatings and adhesives, and printi...展開 Ketjenflex® MH is a toluene sulfonamide in the form of a hard, transparent resin. It is used at a plasticizing co-resin in coatings, adhesives, and inks. Ketjenflex® MH can be used in nitrocellulose coatings, epoxy based coatings and adhesives, and printing inks. 收起 | |
| Ketjenflex® MS 80 | Axcentive Sarl | Ketjenflex® MS 80 is a toluene sulfonamide in the form of a transparent liquid. it is used as a plasticizing co-resin in butyl acetate for coatings, adhesives, and inks. Ketjenflex® MS 80 is the liquid version of Ketjenflex® MH and can easily be poured in...展開 Ketjenflex® MS 80 is a toluene sulfonamide in the form of a transparent liquid. it is used as a plasticizing co-resin in butyl acetate for coatings, adhesives, and inks. Ketjenflex® MS 80 is the liquid version of Ketjenflex® MH and can easily be poured into desired formulations. It has applications in nitrocellulose coatings, cellulose acetate formulations, and printing inks. 收起 | |
| Leafing Aluminum Paste BT-AP400 | BioTio Group | Leafing Aluminum Paste BT-AP400 is a high pure aluminum powder that has a pigment content of 65±2% and a leafing value of ≥65%. This product is most commonly used to resist heat and corrosion in marine paint and roof coatings, industrial coatings, inks, d...展開 Leafing Aluminum Paste BT-AP400 is a high pure aluminum powder that has a pigment content of 65±2% and a leafing value of ≥65%. This product is most commonly used to resist heat and corrosion in marine paint and roof coatings, industrial coatings, inks, decorative and reflective finishes coating, and anti-corrosive coatings. 收起 | |
| Leafing Aluminum Paste BT-AP401 | BioTio Group | Leafing Aluminum Paste BT-AP401 is a high pure aluminum powder that has a pigment content of 65±2% and a leafing value of ≥75%. This product is most commonly used to resist heat and corrosion in marine paint and roof coatings, industrial coatings, inks, d...展開 Leafing Aluminum Paste BT-AP401 is a high pure aluminum powder that has a pigment content of 65±2% and a leafing value of ≥75%. This product is most commonly used to resist heat and corrosion in marine paint and roof coatings, industrial coatings, inks, decorative and reflective finishes coating, and anti-corrosive coatings. 收起 | |
| Leafing Aluminum Paste BT-AP402 | BioTio Group | Leafing Aluminum Paste BT-AP402 is a high pure aluminum powder that has a pigment content of 65±2% and a leafing value of ≥78%. This product is most commonly used to resist heat and corrosion in marine paint and roof coatings, industrial coatings, inks, d...展開 Leafing Aluminum Paste BT-AP402 is a high pure aluminum powder that has a pigment content of 65±2% and a leafing value of ≥78%. This product is most commonly used to resist heat and corrosion in marine paint and roof coatings, industrial coatings, inks, decorative and reflective finishes coating, and anti-corrosive coatings. 收起 | |
| Leafing Aluminum Paste BT-AP403 | BioTio Group | Leafing Aluminum Paste BT-AP403 is a high pure aluminum powder that has a pigment content of 65±2% and a leafing value of ≥82%. This product is most commonly used to resist heat and corrosion in marine paint and roof coatings, industrial coatings, inks, d...展開 Leafing Aluminum Paste BT-AP403 is a high pure aluminum powder that has a pigment content of 65±2% and a leafing value of ≥82%. This product is most commonly used to resist heat and corrosion in marine paint and roof coatings, industrial coatings, inks, decorative and reflective finishes coating, and anti-corrosive coatings. 收起 | |
| Leafing Aluminum Paste BT-AP404 | BioTio Group | Leafing Aluminum Paste BT-AP404 is a high pure aluminum powder that has a pigment content of 73±2% and a leafing value of ≥78%. This product is most commonly used to resist heat and corrosion in marine paint and roof coatings, industrial coatings, inks, d...展開 Leafing Aluminum Paste BT-AP404 is a high pure aluminum powder that has a pigment content of 73±2% and a leafing value of ≥78%. This product is most commonly used to resist heat and corrosion in marine paint and roof coatings, industrial coatings, inks, decorative and reflective finishes coating, and anti-corrosive coatings. 收起 | |
| LITHOPONE BT-IN600 | BioTio Group | LITHOPONE BT-IN600 is a white powder with a zinc sulfide content of ≥28% and a pH value of 7.2. This product is most commonly used in printing inks, marking paints, and coating applications. | |
| Precipitated Barium Sulfate BT-IN601 | BioTio Group | Precipitated Barium Sulfate BT-IN601 is a white powder with a barium sulfate content of 98% and a maximum whiteness of 93. This product is most commonly used as a filler in printing ink, paint, surface coating, coated art paper, and dye applications. | |
| Proxel GXL | Gohil Dyechem Corporation | Proxel GXL is a broad spectrum biocide used for the preservation of industrial water-based products against spoilage from bacteria, yeasts and fungi. This brown liquid is effective in synthetic polymer emulsions, emulsion paints, water-based adhesives, pr...展開 Proxel GXL is a broad spectrum biocide used for the preservation of industrial water-based products against spoilage from bacteria, yeasts and fungi. This brown liquid is effective in synthetic polymer emulsions, emulsion paints, water-based adhesives, printing inks, paper coating compositions, and aqueous mineral and pigment slurries. 收起 | |
| Sodium Alginate BT-IN607 | BioTio Group | Sodium Alginate BT-IN607 is a 40-mesh sized, light yellow powder that has a pH value of 6.0-7.0. This product is most commonly used as a thickener in reactive dyestuff, textile screen-printing, and carpet jet-printing applications. | |
| Spolostan 3G | Enaspol AS | Spolostan 3G is a sodium salt dispersing agent that is a yellow-brown dust free powder in appearance with a low-molecular condensate that prevents the creation of dye agglomerates and enhances dye penetration, uniform dyeing and color fastness. This produ...展開 Spolostan 3G is a sodium salt dispersing agent that is a yellow-brown dust free powder in appearance with a low-molecular condensate that prevents the creation of dye agglomerates and enhances dye penetration, uniform dyeing and color fastness. This product is commonly applied in dyes, pigments, paints, and coatings. It is also an efficient dispersing agent in the grinding of pigments and printing inks. 收起 | |
| Spolostan 3L | Enaspol AS | Spolostan 3L is a sodium salt dispersing agent that is a dark brown liquid in appearance with a low-molecular condensate that prevents the creation of dye agglomerates and enhances dye penetration, uniform dyeing and color fastness. This product is common...展開 Spolostan 3L is a sodium salt dispersing agent that is a dark brown liquid in appearance with a low-molecular condensate that prevents the creation of dye agglomerates and enhances dye penetration, uniform dyeing and color fastness. This product is commonly applied in dyes, pigments, paints, and coatings. It is also an efficient dispersing agent in the grinding of pigments and printing inks. 收起 | |
| Titanium Dioxide Anatase BT-A11 | BioTio Group | Titanium Dioxide Anatase BT-A11 is a white powder that has a titanium dioxide content of ≤93% and a pH value of 6.5-8.0. This product is most commonly used in exterior, water-based, and powder coating, emulsion paints, and printing ink applications. | |
| Titanium Dioxide Anatase BT-A113 | BioTio Group | Titanium Dioxide Anatase BT-A113 is a white powder that has a titanium dioxide content of ≥95% and a pH value of 6.5-8.0. This product is most commonly used in exterior, water-based, and powder coating, emulsion paints, and printing ink applications. | |
| Titanium Dioxide Anatase BT-A114 | BioTio Group | Titanium Dioxide Anatase BT-A114 is a white powder that has a titanium dioxide content of ≥98% and a pH value of 6.5-8.0. This product is most commonly used in exterior, water-based, and powder coating, emulsion paints, and printing ink applications. | |
| Titanium Dioxide Rutile BT-R22 | BioTio Group | Titanium Dioxide Rutile BT-R22 is a white powder that has a titanium dioxide content of ≤90% and a pH value of 6.5-8.0. This product is most commonly used in exterior, water-based, and powder coating, road marking and emulsion paint, and printing ink appl...展開 Titanium Dioxide Rutile BT-R22 is a white powder that has a titanium dioxide content of ≤90% and a pH value of 6.5-8.0. This product is most commonly used in exterior, water-based, and powder coating, road marking and emulsion paint, and printing ink applications. 收起 | |
| Titanium Dioxide Rutile BT-R225 | BioTio Group | Titanium Dioxide Rutile BT-R225 is a white powder that has a titanium dioxide content of ≥93% and a pH value of 6.5-8.0. This product is most commonly used in exterior, water-based, and powder coating, road marking and emulsion paint, and printing ink app...展開 Titanium Dioxide Rutile BT-R225 is a white powder that has a titanium dioxide content of ≥93% and a pH value of 6.5-8.0. This product is most commonly used in exterior, water-based, and powder coating, road marking and emulsion paint, and printing ink applications. 收起 | |
| Titanium Dioxide Rutile BT-R226 | BioTio Group | Titanium Dioxide Rutile BT-R226 is a white powder that has a titanium dioxide content of ≥95% and a pH value of 6.0-8.5. This product is most commonly used in exterior, water-based, and powder coating, road marking and emulsion paint, and printing ink app...展開 Titanium Dioxide Rutile BT-R226 is a white powder that has a titanium dioxide content of ≥95% and a pH value of 6.0-8.5. This product is most commonly used in exterior, water-based, and powder coating, road marking and emulsion paint, and printing ink applications. 收起 | |
| Unithane IC-100 | Union Specialties, Inc. | Unithane IC-100 is a NMP containing, medium hard, high gloss, APEO free, water-based polyurethane dispersion. This product has a gloss at 60° of 85 and a viscosity at 25°C of 100 cps. It is often used in a formulated topcoat for wood, metal, flooring, ink...展開 Unithane IC-100 is a NMP containing, medium hard, high gloss, APEO free, water-based polyurethane dispersion. This product has a gloss at 60° of 85 and a viscosity at 25°C of 100 cps. It is often used in a formulated topcoat for wood, metal, flooring, inks, adhesives, and graphic arts. 收起 | |
| Unithane IC-105 | Union Specialties, Inc. | Unithane IC-105 is an anionic APEO free dispersion of an aliphatic polyester-based urethane in water using a co-solvent of N-Methyl-2-Pyrrolidinone. This product has a gloss at 60° of 85 and a viscosity at 25°C of 100cps. It is designed for industrial coa...展開 Unithane IC-105 is an anionic APEO free dispersion of an aliphatic polyester-based urethane in water using a co-solvent of N-Methyl-2-Pyrrolidinone. This product has a gloss at 60° of 85 and a viscosity at 25°C of 100cps. It is designed for industrial coating applications that require good gloss, chemical resistance and adhesion to a variety of substrates. It can also be used in flooring coatings, paints, graphic arts and inks, and wood coatings. 收起 | |
| Unithane IC-151 NF | Union Specialties, Inc. | Unithane IC-151 NF is an anionic APEO free dispersion of an aliphatic polyester-based urethane in water using a co-solvent of Dipropylene glycol dimethyl ether. It provides good gloss, adhesion, and chemical resistance properties. This product has a gloss...展開 Unithane IC-151 NF is an anionic APEO free dispersion of an aliphatic polyester-based urethane in water using a co-solvent of Dipropylene glycol dimethyl ether. It provides good gloss, adhesion, and chemical resistance properties. This product has a gloss at 60º of 90 and a viscosity at 25°C of 10-150cps. It is often designed for industrial coatings, interior coatings, wood, paints, and graphic arts. 收起 | |
| Unithane IC-204 | Union Specialties, Inc. | Unithane IC-204 is a NMP containing, extremely hard, high gloss, APEO free, water-based polyurethane dispersion with exceptional chemical resistance properties. This product has a gloss at 60° of 85 and a viscosity at 25°C of 50cps. It is often used in a ...展開 Unithane IC-204 is a NMP containing, extremely hard, high gloss, APEO free, water-based polyurethane dispersion with exceptional chemical resistance properties. This product has a gloss at 60° of 85 and a viscosity at 25°C of 50cps. It is often used in a formulated topcoat for wood, metal, flooring, and paints. It can also be used in interior and exterior coatings and graphic arts and inks. 收起 | |
| Unithane IC-301 | Union Specialties, Inc. | Unithane IC-301 is a NMP containing, uniquely hard, high gloss, APEO free, water-based polyurethane dispersion with good abrasion and chemical resistance properties. This product has a gloss at 60° of 88 and a viscosity at 25°C of 50ps. It is often used i...展開 Unithane IC-301 is a NMP containing, uniquely hard, high gloss, APEO free, water-based polyurethane dispersion with good abrasion and chemical resistance properties. This product has a gloss at 60° of 88 and a viscosity at 25°C of 50ps. It is often used in a formulated topcoat for wood, metal, flooring, and paints. It can also be used in graphic arts and exterior coatings. 收起 | |
| Unithane IC-352 NF | Union Specialties, Inc. | Unithane IC-352 NF is a NMP free, uniquely hard, high gloss, APEO free, water-based polyurethane dispersion with fast drying and high chemical resistance properties. This product has a gloss at 60° of 88 and a viscosity at 25°C of 10-500cps. It is often u...展開 Unithane IC-352 NF is a NMP free, uniquely hard, high gloss, APEO free, water-based polyurethane dispersion with fast drying and high chemical resistance properties. This product has a gloss at 60° of 88 and a viscosity at 25°C of 10-500cps. It is often used in formulated topcoat for wood, metal, flooring, graphic arts, and paints. 收起 | |
| Unithane IC-357 NF | Union Specialties, Inc. | Unithane IC-357 NF is a NMP free, uniquely hard, low VOC, high gloss, APEO free, water-based polyurethane dispersion that has abrasion and chemical resistance properties. This product has a gloss at 60° of 89 and a viscosity at 25°C of 50cps. It is design...展開 Unithane IC-357 NF is a NMP free, uniquely hard, low VOC, high gloss, APEO free, water-based polyurethane dispersion that has abrasion and chemical resistance properties. This product has a gloss at 60° of 89 and a viscosity at 25°C of 50cps. It is designed for use in a formulated topcoat for wood, metal, concrete, graphic arts, and paints. 收起 | |
| Unithane IC-400 | Union Specialties, Inc. | Unithane IC-400 is a NMP containing, medium soft, high gloss, APEO free, water-based polyurethane dispersion with fast drying, flexibility, and automotive grade properties. This product has a gloss at 60° of 86 and a viscosity at 25°C of 50cps. It is suit...展開 Unithane IC-400 is a NMP containing, medium soft, high gloss, APEO free, water-based polyurethane dispersion with fast drying, flexibility, and automotive grade properties. This product has a gloss at 60° of 86 and a viscosity at 25°C of 50cps. It is suitable for use in a formulated coating or sealer coat for wood, paint, inks, adhesives, and graphic arts. 收起 | |
| Unithane IC-405 | Union Specialties, Inc. | Unithane IC-405 is an NMP containing, medium soft, low VOC, high gloss, APEO free, water-based polyurethane dispersion that has film clarity and flexibility properties. This product has a gloss at 60º of 91 and a viscosity at 25°C of 50cps. It is often us...展開 Unithane IC-405 is an NMP containing, medium soft, low VOC, high gloss, APEO free, water-based polyurethane dispersion that has film clarity and flexibility properties. This product has a gloss at 60º of 91 and a viscosity at 25°C of 50cps. It is often used in a formulated topcoat for interior coatings, graphic arts, and exterior coatings. 收起 | |
| Unithane IC-451 NF | Union Specialties, Inc. | Unithane IC-451 NF is a NMP free, medium hard, high gloss, APEO free, water-based polyurethane dispersion that has fast drying and has automotive grade properties. This product has a gloss at 60º of 86 and a viscosity at 25°C of 100cps. It is designed for...展開 Unithane IC-451 NF is a NMP free, medium hard, high gloss, APEO free, water-based polyurethane dispersion that has fast drying and has automotive grade properties. This product has a gloss at 60º of 86 and a viscosity at 25°C of 100cps. It is designed for use in a formulated coating for wood, metal, concrete, flooring, graphic arts, and paints. 收起 | |
| Unithane IC-454 NF | Union Specialties, Inc. | Unithane IC-454 NF is an anionic NMP free and APEO free dispersion of an aliphatic polyester/polyether based urethane in water using a co-solvent of dipropylene glycol dimethyl ether. This product has a gloss at 60º of 70-100 and a viscosity at 25°C of 10...展開 Unithane IC-454 NF is an anionic NMP free and APEO free dispersion of an aliphatic polyester/polyether based urethane in water using a co-solvent of dipropylene glycol dimethyl ether. This product has a gloss at 60º of 70-100 and a viscosity at 25°C of 10-500cps. It is designed for use in industrial coatings, graphic arts, and exterior coatings. 收起 | |
| Unithane IC-501 | Union Specialties, Inc. | Unithane IC-501 is a NMP containing, medium soft, high gloss, APEO free, water-based polyurethane dispersion that has adhesion and tack-free properties. This product has a gloss at 60º of 85 and a viscosity at 25°C of 100cps. It is designed for use in a f...展開 Unithane IC-501 is a NMP containing, medium soft, high gloss, APEO free, water-based polyurethane dispersion that has adhesion and tack-free properties. This product has a gloss at 60º of 85 and a viscosity at 25°C of 100cps. It is designed for use in a formulated primer coat for paints, graphic arts, adhesives, and primers. 收起 | |
| Unithane IC-505 | Union Specialties, Inc. | Unithane IC-505 is a NMP containing, soft, low VOC, high gloss, APEO free, water-based polyurethane dispersion that has adhesion, flexibility, and automotive grade properties. This product has a gloss at 60º of 82 and a viscosity at 25°C of 1-500cps. It i...展開 Unithane IC-505 is a NMP containing, soft, low VOC, high gloss, APEO free, water-based polyurethane dispersion that has adhesion, flexibility, and automotive grade properties. This product has a gloss at 60º of 82 and a viscosity at 25°C of 1-500cps. It is suitable for use in a formulated primer coat for concrete, automotive, metal, graphic arts, and adhesives. 收起 | |
| Unithane IC-551 NF | Union Specialties, Inc. | Unithane IC-551 NF is an anionic NMP free and APEO free dispersion that provides good gloss, flexibility, and adhesion properties. This product has a gloss at 60º of 86 and a viscosity at 25°C of 150cps. It is often designed for industrial coatings, inter...展開 Unithane IC-551 NF is an anionic NMP free and APEO free dispersion that provides good gloss, flexibility, and adhesion properties. This product has a gloss at 60º of 86 and a viscosity at 25°C of 150cps. It is often designed for industrial coatings, interior coatings, paints, graphic arts, adhesives and primers. 收起 | |
| Unithane IC-555 NF | Union Specialties, Inc. | Unithane IC-555 NF is a NMP Free, soft, low VOC, high gloss, APEO free, water-based polyurethane dispersion with good adhesion, flexibility, and automotive grade properties. This product has a gloss at 60º of 82 and a viscosity at 25°C of 1-500cps. It is ...展開 Unithane IC-555 NF is a NMP Free, soft, low VOC, high gloss, APEO free, water-based polyurethane dispersion with good adhesion, flexibility, and automotive grade properties. This product has a gloss at 60º of 82 and a viscosity at 25°C of 1-500cps. It is often designed for use in a formulated primer coat for concrete, graphic arts, adhesives, primers, and automotive coatings. 收起 | |
| Unithane IC-803 | Union Specialties, Inc. | Unithane IC-803 is a NMP containing, uniquely soft, low VOC, medium gloss, APEO free, water-based polyurethane dispersion that has a soft feel, flexibility, and automotive grade properties. This product has a gloss at 60º of 80 and a viscosity at 25°C of ...展開 Unithane IC-803 is a NMP containing, uniquely soft, low VOC, medium gloss, APEO free, water-based polyurethane dispersion that has a soft feel, flexibility, and automotive grade properties. This product has a gloss at 60º of 80 and a viscosity at 25°C of 150cps. It is suitable for use in a formulated coating for graphic arts, metal, automotive, paints, and adhesives. 收起 | |
| Unithane IC-805 | Union Specialties, Inc. | Unithane IC-805 is a NMP containing, medium hard, high gloss, APEO free, water-based polyurethane dispersion. This product has a gloss at 60º of 91 and a viscosity at 25°C of 100cps. It is suitable for use in a formulated topcoat for wood, metal, concrete...展開 Unithane IC-805 is a NMP containing, medium hard, high gloss, APEO free, water-based polyurethane dispersion. This product has a gloss at 60º of 91 and a viscosity at 25°C of 100cps. It is suitable for use in a formulated topcoat for wood, metal, concrete, flooring, and graphic arts. 收起 | |
| Unithane IC-807 SF | Union Specialties, Inc. | Unithane IC-807 SF is a solvent free, medium soft, high gloss, APEO free, water-based polyurethane dispersion that has additive compatibility and flexibility properties. This product has a gloss at 60º of 88 and a viscosity at 25°C of 150 cps. It is devel...展開 Unithane IC-807 SF is a solvent free, medium soft, high gloss, APEO free, water-based polyurethane dispersion that has additive compatibility and flexibility properties. This product has a gloss at 60º of 88 and a viscosity at 25°C of 150 cps. It is developed for use in a formulated coating for graphic arts, concrete, paint, automotive, inks, and adhesives. 收起 | |
| Unithane IC-850 NF | Union Specialties, Inc. | Unithane IC-850 NF is a NMP free, uniquely soft, low VOC, medium gloss, APEO free, water-based polyurethane dispersion that has soft feel, flexibility, and automotive grade properties. This product has a gloss at 60º of 88 and a viscosity at 25°C of 150cp...展開 Unithane IC-850 NF is a NMP free, uniquely soft, low VOC, medium gloss, APEO free, water-based polyurethane dispersion that has soft feel, flexibility, and automotive grade properties. This product has a gloss at 60º of 88 and a viscosity at 25°C of 150cps. It is designed for use in a formulated coating for graphic arts, metal, adhesives, automotive, and paints. 收起 | |
| Unithane IC-901 | Union Specialties, Inc. | Unithane IC-901 is a NMP containing, soft, low VOC, high gloss, APEO free, water-based polyurethane dispersion with good adhesion, flexibility, and automotive grade properties. This product has a gloss at 60º of 75 and a viscosity at 25°C of 10-200cps. It...展開 Unithane IC-901 is a NMP containing, soft, low VOC, high gloss, APEO free, water-based polyurethane dispersion with good adhesion, flexibility, and automotive grade properties. This product has a gloss at 60º of 75 and a viscosity at 25°C of 10-200cps. It is suitable for use in a formulated primer coat for concrete, graphic arts, adhesives, and exterior coatings. 收起 | |
| Unithane IC-950 NF | Union Specialties, Inc. | Unithane IC-950 NF is a NMP free, soft, low VOC, high gloss, APEO free, water-based polyurethane dispersion with exceptional adhesion, flexibility, and automotive grade properties. This product has a gloss at 60º of 80 and a viscosity at 25°C of 10-500cps...展開 Unithane IC-950 NF is a NMP free, soft, low VOC, high gloss, APEO free, water-based polyurethane dispersion with exceptional adhesion, flexibility, and automotive grade properties. This product has a gloss at 60º of 80 and a viscosity at 25°C of 10-500cps. It is specifically designed for use in a formulated primer coat for concrete, graphic arts, automotive, metal, adhesives, and paints. 收起 | |
| Unithane IC-953 CP | Union Specialties, Inc. | Unithane IC-953 CP is a NMP free, soft, low VOC, high gloss, APEO free, water-based polyurethane dispersion that has extremely good adhesion to concrete properties. This product has a gloss at 60º of 75 and a viscosity at 25°C of 50-500cps. It is designed...展開 Unithane IC-953 CP is a NMP free, soft, low VOC, high gloss, APEO free, water-based polyurethane dispersion that has extremely good adhesion to concrete properties. This product has a gloss at 60º of 75 and a viscosity at 25°C of 50-500cps. It is designed for use in a formulated primer coat for concrete, automotive, metal, graphic arts, adhesives, and flooring coatings. 收起 | |
| Unithane MP-270 | Union Specialties, Inc. | Unithane MP-270 is a NMP free matte water-based polyurethane that is silica free and has excellent jettness, flexibility, and low gloss properties. This product has a gloss at 60º of 0-2 and a viscosity at 25°C of 700-1200cps. It is designed for use in co...展開 Unithane MP-270 is a NMP free matte water-based polyurethane that is silica free and has excellent jettness, flexibility, and low gloss properties. This product has a gloss at 60º of 0-2 and a viscosity at 25°C of 700-1200cps. It is designed for use in coatings and graphic arts. 收起 | |
| Unithane MP-611 NF | Union Specialties, Inc. | Unithane MP-611 NF is a NMP free, soft, inherently dull, APEO free, water-based polyurethane dispersion with automotive grade properties. This product has a gloss at 60º of 1.0 and a viscosity at 25°C of 800cps. It is designed for use in a formulated coat...展開 Unithane MP-611 NF is a NMP free, soft, inherently dull, APEO free, water-based polyurethane dispersion with automotive grade properties. This product has a gloss at 60º of 1.0 and a viscosity at 25°C of 800cps. It is designed for use in a formulated coating for graphic arts, paints, automotive, and interior coatings. 收起 | |
| Unithane MP-612 NF | Union Specialties, Inc. | Unithane MP-612 NF is a NMP free, soft, inherently dull, APEO free, water-based polyurethane dispersion with automotive grade properties. This product has a gloss at 60º of 0-2 and a viscosity at 25°C of 700-1200cps. It is designed for use in a formulated...展開 Unithane MP-612 NF is a NMP free, soft, inherently dull, APEO free, water-based polyurethane dispersion with automotive grade properties. This product has a gloss at 60º of 0-2 and a viscosity at 25°C of 700-1200cps. It is designed for use in a formulated coating for graphic arts, paints, automotive, and interior coatings. 收起 | |
| Unithane SX-207 SF | Union Specialties, Inc. | Unithane SX-207 SF is an APEO free dispersion of an aliphatic polyester-based urethane in water made without using a co-solvent. It has good gloss and abrasion resistance properties. This product has a gloss at 60º of 87 and a viscosity at 25°C of 100cps....展開 Unithane SX-207 SF is an APEO free dispersion of an aliphatic polyester-based urethane in water made without using a co-solvent. It has good gloss and abrasion resistance properties. This product has a gloss at 60º of 87 and a viscosity at 25°C of 100cps. It is designed for industrial coating applications, wood, concrete, paints, graphic arts, and metal. 收起 | |
| Unithane SX-284 NF | Union Specialties, Inc. | Unithane SX-284 NF is a self-crosslinking, NMP free, extremely hard, high gloss, APEO free, water-based polyurethane dispersion that has good stain and chemical resistance properties. This product has a gloss at 60º of 90 and a viscosity at 25°C of 300cps...展開 Unithane SX-284 NF is a self-crosslinking, NMP free, extremely hard, high gloss, APEO free, water-based polyurethane dispersion that has good stain and chemical resistance properties. This product has a gloss at 60º of 90 and a viscosity at 25°C of 300cps. It is designed for use in a formulated topcoat for wood, metal, concrete, graphic arts, and paints. 收起 | |
| Unithane SX-482 NF | Union Specialties, Inc. | Unithane SX-482 NF is a self-crosslinking, NMP free, medium hard, high gloss, APEO free, water-based polyurethane dispersion with fast drying and good chemical resistance properties. This product has a gloss at 60º of 90 and a viscosity at 25°C of 100cps....展開 Unithane SX-482 NF is a self-crosslinking, NMP free, medium hard, high gloss, APEO free, water-based polyurethane dispersion with fast drying and good chemical resistance properties. This product has a gloss at 60º of 90 and a viscosity at 25°C of 100cps. It is specifically designed for use in a formulated coating for wood, metal, concrete, graphic arts, and paints. 收起 | |
| Unithane SX-487 SF | Union Specialties, Inc. | Unithane SX-487 SF is a self-crosslinking, solvent free, medium hard, high gloss, APEO free, water-based polyurethane dispersion that has good chemical and abrasion resistance properties. This product has a gloss at 60º of 89 and a viscosity at 25°C of 10...展開 Unithane SX-487 SF is a self-crosslinking, solvent free, medium hard, high gloss, APEO free, water-based polyurethane dispersion that has good chemical and abrasion resistance properties. This product has a gloss at 60º of 89 and a viscosity at 25°C of 100cps. It is designed for use in a formulated coating for graphic arts, wood, adhesives, and paints. 收起 |
