| ANCAMIDE® 220-X-70 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | ANCAMIDE® 220-X-70 Curing Agent is one in a series of standard reactive polyamides intended for use in the curing of epoxy resins. It is ideal for use in solvent-based maintenance coatings, primers, sealers and coatings for concrete. | Request Sample |
| ANCAREZ® AR555 Waterborne Epoxy Resin | Evonik Operations GmbH, BL Crosslinkers | ANCAREZ® AR555 Waterborne Epoxy Resin is a waterborne solid epoxy resin dispersion delivered at 55% solids in water. It is designed for use in two-component, ambient-cure epoxy systems. It delivers superior performance at lower cost when compared to con...展開 ANCAREZ® AR555 Waterborne Epoxy Resin is a waterborne solid epoxy resin dispersion delivered at 55% solids in water. It is designed for use in two-component, ambient-cure epoxy systems. It delivers superior performance at lower cost when compared to conventional solid resin dispersions. The unique nature of this product allows film formulation without high levels of coalescing solvent, which enables the formulation of low-odor, zero-VOC systems. 收起 | Request Sample |
| AT-152 | Antex Chemicals (Zhongshan) Limited | AT-152 is a high-performance modified acrylic polymer that appears as a milky, white liquid. This product is an alkali swellable associate urethane thickener emulsion that can be used as a co-thickener in thickening applications where reduction in sag is ...展開 AT-152 is a high-performance modified acrylic polymer that appears as a milky, white liquid. This product is an alkali swellable associate urethane thickener emulsion that can be used as a co-thickener in thickening applications where reduction in sag is desired, particularly in paint, pigment printing and paper printing applications. 收起 | |
| AT-166 | Antex Chemicals (Zhongshan) Limited | AT-166 is an acid-containing, modified acrylic polymer with very low viscosity that appears as a milky, white liquid. This product can be used as a thickening agent in emulsion paint, textile back coatings, pigment printing, and adhesive reformation indus...展開 AT-166 is an acid-containing, modified acrylic polymer with very low viscosity that appears as a milky, white liquid. This product can be used as a thickening agent in emulsion paint, textile back coatings, pigment printing, and adhesive reformation industries. 收起 | |
| AT-288 | Antex Chemicals (Zhongshan) Limited | AT-288 is an acid-containing, all acrylic copolymer emulsion with very low viscosity that appears as a milky, white liquid. This product can be used as a thickening agent in emulsion paint, textile back coating, pigment printing, and adhesive reformation ...展開 AT-288 is an acid-containing, all acrylic copolymer emulsion with very low viscosity that appears as a milky, white liquid. This product can be used as a thickening agent in emulsion paint, textile back coating, pigment printing, and adhesive reformation industries. 收起 | |
| AT-6336MRS-1 | Antex Chemicals (Zhongshan) Limited | AT-6336MRS-1 is a styrene acrylic copolymer emulsion with very small particle size and good mechanical stability. This product appears as a brown liquid, and it can be used for textile pigment printing. | |
| DA-40A | Antex Chemicals (Zhongshan) Limited | DA-40A is an ammonium-based, all acrylic copolymer that appears as a yellowish solution. This product can be used as a dispersant in the paint industry, and exhibits excellent dispersant properties for pigment paste. | |
| DA-40N | Antex Chemicals (Zhongshan) Limited | DA-40N is an ammonium-based, all acrylic copolymer that appears as a yellowish solution. This product can be used as a dispersant in the paint industry, and exhibits excellent dispersant properties for pigment paste. | |
| EPODIL® 742 | Evonik Operations GmbH, BL Crosslinkers | An epoxy resin system modifier. | Request Sample |
| EPODIL® 759 Reactive Diluent | Evonik Operations GmbH, BL Crosslinkers | EPODIL® 759 Reactive Diluent is an aliphatic glycidyl ether (C12– C13). The product is a monofunctional reactive diluent used to reduce the viscosity of epoxy resin systems. Since monofunctional diluents, in general, cause molecular weight chain terminati...展開 EPODIL® 759 Reactive Diluent is an aliphatic glycidyl ether (C12– C13). The product is a monofunctional reactive diluent used to reduce the viscosity of epoxy resin systems. Since monofunctional diluents, in general, cause molecular weight chain termination, the minimum amount necessary to achieve the desired viscosity reduction should be used. 收起 | Request Sample |
| GarLAS 16/50 | Ganga Rasayanie (Pvt) Ltd | GarLAS 16/50 is a low aromatic solvent that has highly refined narrow fractions and low toxicity, odor, and VOC. This product has an initial boiling point of 150 and a final boiling point of 180. It is often used in paints and varnish, can coatings, ink o...展開 GarLAS 16/50 is a low aromatic solvent that has highly refined narrow fractions and low toxicity, odor, and VOC. This product has an initial boiling point of 150 and a final boiling point of 180. It is often used in paints and varnish, can coatings, ink oils, bituminous coatings, and adhesives. 收起 | |
| GarLAS 1924 | Ganga Rasayanie (Pvt) Ltd | GarLAS 1924 is a low aromatic solvent that has highly refined narrow fractions and low toxicity, odor, and VOC. This product has an initial boiling point of 190 and a final boiling point of 240. It is often used in paints and varnish, can coatings, ink oi...展開 GarLAS 1924 is a low aromatic solvent that has highly refined narrow fractions and low toxicity, odor, and VOC. This product has an initial boiling point of 190 and a final boiling point of 240. It is often used in paints and varnish, can coatings, ink oils, bituminous coatings, and adhesives. 收起 | |
| GarLAS 2035 | Ganga Rasayanie (Pvt) Ltd | GarLAS 2035 is a low aromatic solvent that has highly refined narrow fractions and low toxicity, odor, and VOC. This product has an initial boiling point of 180 and a final boiling point of 240. It is often used in paints and varnish, can coatings, ink oi...展開 GarLAS 2035 is a low aromatic solvent that has highly refined narrow fractions and low toxicity, odor, and VOC. This product has an initial boiling point of 180 and a final boiling point of 240. It is often used in paints and varnish, can coatings, ink oils, bituminous coatings, and adhesives. 收起 | |
| GarLAS 2035C | Ganga Rasayanie (Pvt) Ltd | GarLAS 2035C is a low aromatic solvent that has highly refined narrow fractions and low toxicity, odor, and VOC. This product has an initial boiling point of 190 and a final boiling point of 260. It is often used in paints and varnish, can coatings, ink o...展開 GarLAS 2035C is a low aromatic solvent that has highly refined narrow fractions and low toxicity, odor, and VOC. This product has an initial boiling point of 190 and a final boiling point of 260. It is often used in paints and varnish, can coatings, ink oils, bituminous coatings, and adhesives. 收起 | |
| GarLAS 20/40 | Ganga Rasayanie (Pvt) Ltd | GarLAS 20/40 is a low aromatic solvent that has highly refined narrow fractions and low toxicity, odor, and VOC. This product has an initial boiling point of 160 and a final boiling point of 200. It is often used in paints and varnish, can coatings, ink o...展開 GarLAS 20/40 is a low aromatic solvent that has highly refined narrow fractions and low toxicity, odor, and VOC. This product has an initial boiling point of 160 and a final boiling point of 200. It is often used in paints and varnish, can coatings, ink oils, bituminous coatings, and adhesives. 收起 | |
| GaroMAX™ 21/60 | Ganga Rasayanie (Pvt) Ltd | GaroMAX™ 21/60 is a medium aromatic fluid that is a high flash, low volatile, low-density clear light color solvent. This product has an initial boiling point of 160 and a final boiling point of 310. It is often used in PVC/screen inks, stoving, roller, m...展開 GaroMAX™ 21/60 is a medium aromatic fluid that is a high flash, low volatile, low-density clear light color solvent. This product has an initial boiling point of 160 and a final boiling point of 310. It is often used in PVC/screen inks, stoving, roller, metal, and can coatings. 收起 | |
| GaroMAX™ 21/60A | Ganga Rasayanie (Pvt) Ltd | GaroMAX™ 21/60A is a medium aromatic fluid that is a high flash, low volatile, low-density clear light color solvent. This product has an initial boiling point of 180 and a final boiling point of 250. It is often used in PVC/screen inks, stoving, roller, ...展開 GaroMAX™ 21/60A is a medium aromatic fluid that is a high flash, low volatile, low-density clear light color solvent. This product has an initial boiling point of 180 and a final boiling point of 250. It is often used in PVC/screen inks, stoving, roller, metal, and can coatings. 收起 | |
| GaroMAX™ 4546 | Ganga Rasayanie (Pvt) Ltd | GaroMAX™ 4546 is a medium aromatic fluid that is a high flash, low volatile, low-density clear light color solvent. This product has an initial boiling point of 180 and a final boiling point of 280. It is often used in PVC/screen inks, stoving, roller, me...展開 GaroMAX™ 4546 is a medium aromatic fluid that is a high flash, low volatile, low-density clear light color solvent. This product has an initial boiling point of 180 and a final boiling point of 280. It is often used in PVC/screen inks, stoving, roller, metal, and can coatings. 收起 | |
| GaroMAX™ 46 | Ganga Rasayanie (Pvt) Ltd | GaroMAX™ 46 is a medium aromatic fluid that is a high flash, low volatile, low-density clear light color solvent. This product has an initial boiling point of 190 and a final boiling point of 330. It is often used in PVC/screen inks, stoving, roller, meta...展開 GaroMAX™ 46 is a medium aromatic fluid that is a high flash, low volatile, low-density clear light color solvent. This product has an initial boiling point of 190 and a final boiling point of 330. It is often used in PVC/screen inks, stoving, roller, metal, and can coatings. 收起 | |
| GaroMAX™ 46B | Ganga Rasayanie (Pvt) Ltd | GaroMAX™ 46B is a medium aromatic fluid that is a high flash, low volatile, low-density clear light color solvent. This product has an initial boiling point of 210 and a final boiling point of 270. It is often used in PVC/screen inks, stoving, roller, met...展開 GaroMAX™ 46B is a medium aromatic fluid that is a high flash, low volatile, low-density clear light color solvent. This product has an initial boiling point of 210 and a final boiling point of 270. It is often used in PVC/screen inks, stoving, roller, metal, and can coatings. 收起 | |
| GaroSOL™ 100 | Ganga Rasayanie (Pvt) Ltd | GaroSOL™ 100 is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 160 and a final boiling point of 180. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coating...展開 GaroSOL™ 100 is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 160 and a final boiling point of 180. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coatings, inks, and sealants. 收起 | |
| GaroSOL™ 110 | Ganga Rasayanie (Pvt) Ltd | GaroSOL™ 110 is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 165 and a final boiling point of 205. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coating...展開 GaroSOL™ 110 is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 165 and a final boiling point of 205. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coatings, screen inks, and sealants. 收起 | |
| GaroSOL™ 150 | Ganga Rasayanie (Pvt) Ltd | GaroSOL™ 150 is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 180 and a final boiling point of 220. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coating...展開 GaroSOL™ 150 is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 180 and a final boiling point of 220. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coatings, screen inks, and sealants. 收起 | |
| GaroSOL™ 150ND | Ganga Rasayanie (Pvt) Ltd | GaroSOL™ 150ND is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 175 and a final boiling point of 205. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coati...展開 GaroSOL™ 150ND is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 175 and a final boiling point of 205. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coatings, screen inks, and sealants. 收起 | |
| GaroSOL™ 155 | Ganga Rasayanie (Pvt) Ltd | GaroSOL™ 155 is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 165 and a final boiling point of 250. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coating...展開 GaroSOL™ 155 is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 165 and a final boiling point of 250. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coatings, inks, and sealants. 收起 | |
| GaroSOL™ 160 | Ganga Rasayanie (Pvt) Ltd | GaroSOL™ 160 is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 190 and a final boiling point of 240. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coating...展開 GaroSOL™ 160 is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 190 and a final boiling point of 240. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coatings, inks, and sealants. 收起 | |
| GaroSOL™ 180 | Ganga Rasayanie (Pvt) Ltd | GaroSOL™ 180 is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 200 and a final boiling point of 270. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coating...展開 GaroSOL™ 180 is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 200 and a final boiling point of 270. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coatings, screen inks, and sealants. 收起 | |
| GaroSOL™ 200 | Ganga Rasayanie (Pvt) Ltd | GaroSOL™ 200 is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 220 and a final boiling point of 300. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coating...展開 GaroSOL™ 200 is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 220 and a final boiling point of 300. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coatings, screen inks, and sealants. 收起 | |
| GaroSOL™ 200A | Ganga Rasayanie (Pvt) Ltd | GaroSOL™ 200A is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 230 and a final boiling point of 330. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coatin...展開 GaroSOL™ 200A is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 230 and a final boiling point of 330. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coatings, screen inks, and sealants. 收起 | |
| GaroSOL™ 200ND | Ganga Rasayanie (Pvt) Ltd | GaroSOL™ 200ND is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 245 and a final boiling point of 320. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coati...展開 GaroSOL™ 200ND is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 245 and a final boiling point of 320. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coatings, screen inks, and sealants. 收起 | |
| GaroSOL™ 250 | Ganga Rasayanie (Pvt) Ltd | GaroSOL™ 250 is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 245 and a final boiling point of 360. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coating...展開 GaroSOL™ 250 is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 245 and a final boiling point of 360. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coatings, screen inks, and sealants. 收起 | |
| GaroSOL™ 250A | Ganga Rasayanie (Pvt) Ltd | GaroSOL™ 250A is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 260 and a final boiling point of 380. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coatin...展開 GaroSOL™ 250A is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 260 and a final boiling point of 380. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coatings, screen inks, and sealants. 收起 | |
| GaroSOL™ 300 | Ganga Rasayanie (Pvt) Ltd | GaroSOL™ 300 is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 270 and a final boiling point of 400. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coating...展開 GaroSOL™ 300 is a high boiling, narrow cut solvent with excellent solvency. This product has an initial boiling point of 270 and a final boiling point of 400. It is often used in the automotive and OEM coatings, industrial, stoving, coil and metal coatings, screen inks, and sealants. 收起 | |
| GrintoSOL™ 1924 | Ganga Rasayanie (Pvt) Ltd | GrintoSOL™ 1924 is a highly refined, hydrogenated aliphatic solvent with relatively narrow boiling range, low aromatics and mild odor. This product has an initial boiling point of 190 and a final boiling point of 240, and is often used in ink oils and min...展開 GrintoSOL™ 1924 is a highly refined, hydrogenated aliphatic solvent with relatively narrow boiling range, low aromatics and mild odor. This product has an initial boiling point of 190 and a final boiling point of 240, and is often used in ink oils and mineral oil distillates for offset inks. 收起 | |
| GrintoSOL™ 2427 | Ganga Rasayanie (Pvt) Ltd | GrintoSOL™ 2427 is a highly refined, hydrogenated aliphatic solvent with relatively narrow boiling range, low aromatics and mild odor. This product has an initial boiling point of 230 and a final boiling point of 270, and is often used in ink oils and min...展開 GrintoSOL™ 2427 is a highly refined, hydrogenated aliphatic solvent with relatively narrow boiling range, low aromatics and mild odor. This product has an initial boiling point of 230 and a final boiling point of 270, and is often used in ink oils and mineral oil distillates for offset inks. 收起 | |
| GrintoSOL™ 2428 | Ganga Rasayanie (Pvt) Ltd | GrintoSOL™ 2428 is a highly refined, hydrogenated aliphatic solvent with relatively narrow boiling range, low aromatics and mild odor. This product has an initial boiling point of 240 and a final boiling point of 280, and is often used in ink oils and min...展開 GrintoSOL™ 2428 is a highly refined, hydrogenated aliphatic solvent with relatively narrow boiling range, low aromatics and mild odor. This product has an initial boiling point of 240 and a final boiling point of 280, and is often used in ink oils and mineral oil distillates for offset inks. 收起 | |
| GrintoSOL™ 2535 | Ganga Rasayanie (Pvt) Ltd | GrintoSOL™ 2535 is a highly refined, hydrogenated aliphatic solvent with relatively narrow boiling range, low aromatics and mild odor. This product has an initial boiling point of 250 and a final boiling point of 350, and is often used in ink oils and min...展開 GrintoSOL™ 2535 is a highly refined, hydrogenated aliphatic solvent with relatively narrow boiling range, low aromatics and mild odor. This product has an initial boiling point of 250 and a final boiling point of 350, and is often used in ink oils and mineral oil distillates for offset inks. 收起 | |
| GrintoSOL™ 2629 | Ganga Rasayanie (Pvt) Ltd | GrintoSOL™ 2629 is a highly refined, hydrogenated aliphatic solvent with relatively narrow boiling range, low aromatics and mild odor. This product has an initial boiling point of 260 and a final boiling point of 290, and is often used in ink oils and min...展開 GrintoSOL™ 2629 is a highly refined, hydrogenated aliphatic solvent with relatively narrow boiling range, low aromatics and mild odor. This product has an initial boiling point of 260 and a final boiling point of 290, and is often used in ink oils and mineral oil distillates for offset inks. 收起 | |
| GrintoSOL™ 2633 | Ganga Rasayanie (Pvt) Ltd | GrintoSOL™ 2633 is a highly refined, hydrogenated aliphatic solvent with relatively narrow boiling range, low aromatics and mild odor. This product has an initial boiling point of 260 and a final boiling point of 320, and is often used in ink oils and min...展開 GrintoSOL™ 2633 is a highly refined, hydrogenated aliphatic solvent with relatively narrow boiling range, low aromatics and mild odor. This product has an initial boiling point of 260 and a final boiling point of 320, and is often used in ink oils and mineral oil distillates for offset inks. 收起 | |
| HYBRIDUR® 580 Polymer Dispersion | Evonik Operations GmbH, BL Crosslinkers | HYBRIDUR® 580 Polymer Dispersion is an acrylic-urethane hybrid polymer dispersion. Cost-effective alternative to standard polyurethane dispersions. Provides outstanding adhesion to a wide variety of substrates, superior abrasion, and chemical and stain re...展開 HYBRIDUR® 580 Polymer Dispersion is an acrylic-urethane hybrid polymer dispersion. Cost-effective alternative to standard polyurethane dispersions. Provides outstanding adhesion to a wide variety of substrates, superior abrasion, and chemical and stain resistance. 收起 | Request Sample |
| IMICURE® AMI-1 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | IMICURE® AMI-1 Curing Agent is a liquid, elevated-temperature curing agent for epoxy resins. It is readily compatible with both liquid and solid epoxy resins, and because it is a catalytic curing agent, it is used at low loadings of 1−5 phr. It is ideal f...展開 IMICURE® AMI-1 Curing Agent is a liquid, elevated-temperature curing agent for epoxy resins. It is readily compatible with both liquid and solid epoxy resins, and because it is a catalytic curing agent, it is used at low loadings of 1−5 phr. It is ideal for use in adhesives, pre-preg composites, and encapsulation. 收起 | Request Sample |
| IMICURE® EMI-24 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | IMICURE® EMI-24 Curing Agent s a liquid imidazole which functions as both a curing agent and a cure accelerator for high-performance epoxy resin systems. This unusually versatile imidazole is readily processed, and provides excellent physical properties a...展開 IMICURE® EMI-24 Curing Agent s a liquid imidazole which functions as both a curing agent and a cure accelerator for high-performance epoxy resin systems. This unusually versatile imidazole is readily processed, and provides excellent physical properties across a wide range of curing temperatures. 收起 | Request Sample |
| IMICURE® Imidazole Curing Agent | Evonik Operations GmbH, BL Crosslinkers | IMICURE® Imidazole Curing Agent is an elevated-temperature curing agent for epoxy resins. It is readily compatible with both liquid and solid epoxy resins, and because it is a catalytic curing agent, it is used at low loadings of 1−5 phr. It is a good acc...展開 IMICURE® Imidazole Curing Agent is an elevated-temperature curing agent for epoxy resins. It is readily compatible with both liquid and solid epoxy resins, and because it is a catalytic curing agent, it is used at low loadings of 1−5 phr. It is a good accelerator for dicyandiamide, anhydride and phenolic curing agents. 收起 | Request Sample |
| JMT-150ANO | Tayca Corporation | JMT-150ANO is a cationic titanium dioxide with an average primary particle size of 15 nm. It is surface treated with alkylsilane, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| JMT-150AO | Tayca Corporation | JMT-150AO is an anionic titanium dioxide with an average primary particle size of 15 nm. It is surface treated with alkylsilane, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| JMT-150FI | Tayca Corporation | JMT-150FI is an anionic titanium dioxide with an average primary particle size of 15 nm. It is surface treated with alkylsilane, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| JMT-150IB | Tayca Corporation | JMT-150IB is an anionic titanium dioxide with an average primary particle size of 15 nm. It is surface treated with alkylsilane, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| JR-800 | Tayca Corporation | JR-800 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for inks that are applied to automobiles, household products and other white-colored products. It contains aluminum and silicon with an average .27...展開 JR-800 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for inks that are applied to automobiles, household products and other white-colored products. It contains aluminum and silicon with an average .27µm particle size and 29 g/100g of oil absorption. 收起 | |
| JR-805 | Tayca Corporation | JR-805 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for inks that are applied to automobiles, household products and other white-colored products. It contains aluminum and silicon with an average .29...展開 JR-805 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for inks that are applied to automobiles, household products and other white-colored products. It contains aluminum and silicon with an average .29µm particle size and 22 g/100g of oil absorption. 收起 | |
| JR-806 | Tayca Corporation | JR-806 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for inks that are applied to automobiles, household products and other white-colored products. It contains aluminum and silicon with an average .25...展開 JR-806 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for inks that are applied to automobiles, household products and other white-colored products. It contains aluminum and silicon with an average .25µm particle size and 21 g/100g of oil absorption. 收起 | |
| K-White #105 | Tayca Corporation | K-White #105 is a white powder aluminum triphosphate with an average particle size of 1.6 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent...展開 K-White #105 is a white powder aluminum triphosphate with an average particle size of 1.6 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
| K-White #140W | Tayca Corporation | K-White #140W is a white powder aluminum triphosphate with an average particle size of 2.7 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solven...展開 K-White #140W is a white powder aluminum triphosphate with an average particle size of 2.7 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
| K-White #450H | Tayca Corporation | K-White #450H is a white powder aluminum triphosphate with an average particle size of 3.5 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solven...展開 K-White #450H is a white powder aluminum triphosphate with an average particle size of 3.5 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
| K-White #82 | Tayca Corporation | K-White #82 is a white powder aluminum triphosphate with an average particle size of 3.5 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent-...展開 K-White #82 is a white powder aluminum triphosphate with an average particle size of 3.5 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
| K-White #84 | Tayca Corporation | K-White #84 is a white powder aluminum triphosphate with an average particle size of 3.7 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent-...展開 K-White #84 is a white powder aluminum triphosphate with an average particle size of 3.7 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
| K-White #84S | Tayca Corporation | K-White #84S is a white powder aluminum triphosphate with an average particle size of 3.7 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent...展開 K-White #84S is a white powder aluminum triphosphate with an average particle size of 3.7 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
| K-White #85 | Tayca Corporation | K-White #85 is a white powder aluminum triphosphate with an average particle size of 3.7 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent-...展開 K-White #85 is a white powder aluminum triphosphate with an average particle size of 3.7 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
| K-White #94 | Tayca Corporation | K-White #94 is a white powder aluminum triphosphate with an average particle size of 6.3 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent-...展開 K-White #94 is a white powder aluminum triphosphate with an average particle size of 6.3 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
| K-White Ca650 | Tayca Corporation | K-White Ca650 is a white powder aluminum triphosphate with an average particle size of 3.5 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solven...展開 K-White Ca650 is a white powder aluminum triphosphate with an average particle size of 3.5 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
| K-White G105 | Tayca Corporation | K-White G105 is a white powder aluminum triphosphate with an average particle size of 2.3 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent...展開 K-White G105 is a white powder aluminum triphosphate with an average particle size of 2.3 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
| MSN-002 | Tayca Corporation | MSN-002 is an anionic silica dioxide with an average primary particle size of 16 nm. It is surface treated with alkylsilane and silicone oil, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| MSN-003 | Tayca Corporation | MSN-003 is an anionic silica dioxide with an average primary particle size of 16 nm. It is surface treated with alkylsilane and silicone oil, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| MSN-007 | Tayca Corporation | MSN-007 is an anionic silica dioxide with an average primary particle size of 16 nm. It is surface treated with alkylsilane, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| MSP-001 | Tayca Corporation | MSP-001 is a cationic silica dioxide with an average primary particle size of 16 nm. It is surface treated with alkylsilane and silicone oil, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| MSP-005 | Tayca Corporation | MSP-005 is a cationic silica dioxide with an average primary particle size of 16 nm. It is surface treated with alkylsilane and silicone oil, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| MSP-009 | Tayca Corporation | MSP-009 is a cationic silica dioxide with an average primary particle size of 80 nm. It is surface treated with alkylsilane and silicone oil, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| MSP-012 | Tayca Corporation | MSP-012 is a cationic silica dioxide with an average primary particle size of 16 nm. It is surface treated with alkylsilane and silicone oil, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| MT-01 | Tayca Corporation | MT-01 is a micro titanium dioxide (10nm) that contains aluminum and stearic acid and can be used in pigments, paints and inks to provide water repellency, transparency and dispersibility. | |
| MT-05 | Tayca Corporation | MT-05 is a micro titanium dioxide (10nm) that contains aluminum and silicon and can be used in pigments, paints and inks to provide water repellency, transparency and low activity. | |
| MT-100AQ | Tayca Corporation | MT-100AQ is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with silicon, aluminum and sodium alginate. It exhibits good stability, water affinity and dispersibility in applications such as paints,...展開 MT-100AQ is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with silicon, aluminum and sodium alginate. It exhibits good stability, water affinity and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
| MT-100HD | Tayca Corporation | MT-100HD is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with zirconium and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and elec...展開 MT-100HD is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with zirconium and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
| MT-100S | Tayca Corporation | MT-100S is a micro titanium dioxide (15nm) that contains aluminum and lauric acid and can be used in pigments, paints and inks to provide water repellency, lipophilic characteristics and affinity with resin. | |
| MT-100SA | Tayca Corporation | MT-100SA is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with silicon and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and electr...展開 MT-100SA is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with silicon and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
| MT-100WP | Tayca Corporation | MT-100WP is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with silicon. It exhibits good water affinity, compatibility with water-soluble thickening agents and dispersibility in applications such...展開 MT-100WP is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with silicon. It exhibits good water affinity, compatibility with water-soluble thickening agents and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
| MT-100Z | Tayca Corporation | MT-100Z is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with aluminum and stearic acid. It exhibits good transparency, water repellency and dispersibility in applications such as paints, inks an...展開 MT-100Z is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with aluminum and stearic acid. It exhibits good transparency, water repellency and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
| MT-10EX | Tayca Corporation | MT-10EX is a micro titanium dioxide (10nm) that contains aluminum and isostearic acid and can be used in pigments, paints and inks to provide transparency, dispersibility and low viscosity when dispersed in oil phase. | |
| MT-150A | Tayca Corporation | MT-150A is an unprocessed titanium dioxide with an average primary particle size of 15 nm. It is suitable for use as a colorant in paints, inks and electrophotography. | |
| MT-150EX | Tayca Corporation | MT-150EX is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with aluminum and isostearic acid. It exhibits good transparency, water repellency and dispersibility in applications such as paints, ink...展開 MT-150EX is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with aluminum and isostearic acid. It exhibits good transparency, water repellency and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
| MT-150W | Tayca Corporation | MT-150W is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with sodium metaphosphate. It exhibits good transparency and dispersibility in applications such as paints, inks and electrophotography. | |
| MT-300HD | Tayca Corporation | MT-300HD is a micro-fine titanium dioxide with an average primary particle size of 25 nm. It has been surface treated with zirconium and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and elec...展開 MT-300HD is a micro-fine titanium dioxide with an average primary particle size of 25 nm. It has been surface treated with zirconium and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
| MT-500B | Tayca Corporation | MT-500B is an unprocessed titanium dioxide with an average primary particle size of 35 nm. It is suitable for use as a colorant in paints, inks and electrophotography. | |
| MT-500HD | Tayca Corporation | MT-500HD is a micro-fine titanium dioxide with an average primary particle size of 30 nm. It has been surface treated with zirconium and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and elec...展開 MT-500HD is a micro-fine titanium dioxide with an average primary particle size of 30 nm. It has been surface treated with zirconium and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
| MT-500SA | Tayca Corporation | MT-500SA is a titanium dioxide with an average primary particle size of 35 nm. It has been surface treated with silicon and aluminum, making it suitable for applications requiring good outdoor weather resistance. It is suitable for use as a colorant in pa...展開 MT-500SA is a titanium dioxide with an average primary particle size of 35 nm. It has been surface treated with silicon and aluminum, making it suitable for applications requiring good outdoor weather resistance. It is suitable for use as a colorant in paints, inks and electrophotography. 收起 | |
| MT-500SAS | Tayca Corporation | MT-500SAS is a titanium dioxide with an average primary particle size of 30 nm. It has been surface treated with silicone oil, silicon and aluminum, making it suitable for applications requiring good outdoor weather resistance and water repellency. It is ...展開 MT-500SAS is a titanium dioxide with an average primary particle size of 30 nm. It has been surface treated with silicone oil, silicon and aluminum, making it suitable for applications requiring good outdoor weather resistance and water repellency. It is suitable for use as a colorant in paints, inks and electrophotography. 收起 | |
| MT-600B | Tayca Corporation | MT-600B is an unprocessed titanium dioxide with an average primary particle size of 50 nm. It is suitable for use as a colorant in paints, inks and electrophotography. | |
| MT-600SA | Tayca Corporation | MT-600SA is a titanium dioxide with an average primary particle size of 50 nm. It has been surface treated with silicon and aluminum, making it suitable for applications requiring good outdoor weather resistance. It is suitable for use as a colorant in pa...展開 MT-600SA is a titanium dioxide with an average primary particle size of 50 nm. It has been surface treated with silicon and aluminum, making it suitable for applications requiring good outdoor weather resistance. It is suitable for use as a colorant in paints, inks and electrophotography. 收起 | |
| MT-700B | Tayca Corporation | MT-700B is an unprocessed titanium dioxide with an average primary particle size of 80 nm. It is suitable for use as a colorant in paints, inks and electrophotography in applications where good UV-A scattering efficiency is desired. | |
| MT-700HD | Tayca Corporation | MT-700HD is a micro-fine titanium dioxide with an average primary particle size of 50 nm. It has been surface treated with zirconium and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and elec...展開 MT-700HD is a micro-fine titanium dioxide with an average primary particle size of 50 nm. It has been surface treated with zirconium and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
| MTY-02 | Tayca Corporation | MTY-02 is a micro-fine titanium dioxide with an average primary particle size of 10 nm. It has been surface treated with aluminum, silicon and silicone oil. It exhibits good transparency, water repellency and dispersibility in applications such as paints,...展開 MTY-02 is a micro-fine titanium dioxide with an average primary particle size of 10 nm. It has been surface treated with aluminum, silicon and silicone oil. It exhibits good transparency, water repellency and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
| MTY-110M3S | Tayca Corporation | MTY-110M3S is a micro-fine, low viscosity titanium dioxide with an average primary particle size of 10 nm. It has been surface treated with aluminum, silicon and silicone oil. It exhibits good water repellency, transparency and dispersibility in applicati...展開 MTY-110M3S is a micro-fine, low viscosity titanium dioxide with an average primary particle size of 10 nm. It has been surface treated with aluminum, silicon and silicone oil. It exhibits good water repellency, transparency and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
| MTY-150ANO | Tayca Corporation | MTY-150ANO is a cationic titanium dioxide with an average primary particle size of 15 nm. It is surface treated with alkylsilane, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| MTY-150AO | Tayca Corporation | MTY-150AO is an anionic titanium dioxide with an average primary particle size of 15 nm. It is surface treated with alkylsilane, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| MTY-150FI | Tayca Corporation | MTY-150FI is an anionic titanium dioxide with an average primary particle size of 15 nm. It is surface treated with alkylsilane, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| MTY-150IB | Tayca Corporation | MTY-150IB is an anionic titanium dioxide with an average primary particle size of 15 nm. It is surface treated with alkylsilane, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
| MTY-700BS | Tayca Corporation | MTY-700BS is a titanium dioxide with an average primary particle size of 80 nm. It is surface treated with silicone oil, making it suitable for use as a colorant in paints, inks and electrophotography in applications where good UV-A scattering efficiency ...展開 MTY-700BS is a titanium dioxide with an average primary particle size of 80 nm. It is surface treated with silicone oil, making it suitable for use as a colorant in paints, inks and electrophotography in applications where good UV-A scattering efficiency and water repellency is desired. 收起 | |
| MZ-300 | Tayca Corporation | MZ-300 is an untreated micro-fine zinc dioxide with an average primary particle size of 35 nm. It exhibits good transparency and UV-A shielding properties in formulations for paints and inks. | |
| MZ-306X | Tayca Corporation | MZ-306X is a silicone oil treated, micro-fine zinc dioxide with an average primary particle size of 35 nm. It exhibits good transparency, water repellency, dispersibility and UV-A shielding properties in formulations for paints and inks. | |
| MZ-500 | Tayca Corporation | MZ-500 is an untreated micro-fine zinc dioxide with an average primary particle size of 25 nm. It exhibits very good transparency in formulations for paints and inks. | |
| MZ-506X | Tayca Corporation | MZ-506X is a silicone oil treated, micro-fine zinc dioxide with an average primary particle size of 25 nm. It exhibits good water repellency, dispersal and transparency properties in formulations for paints and inks. | |
| MZ-510HPSX | Tayca Corporation | MZ-510HPSX is a silica and silicone oil treated, micro-fine zinc dioxide with an average primary particle size of 25 nm. It exhibits very good transparency and good light resistance in formulations for paints and inks. |
