| Alpha-Rez™ 3500 E | Lawter | Alpha-Rez™ 3500 E is a low viscous, modified hydrocarbon resin that has high solubility and displays a good gel response to aluminum gelling agents. It also has a lower water pick-up and functions as a water balance regulator. The product has ideal pigmen...展開 Alpha-Rez™ 3500 E is a low viscous, modified hydrocarbon resin that has high solubility and displays a good gel response to aluminum gelling agents. It also has a lower water pick-up and functions as a water balance regulator. The product has ideal pigment wetting properties causing inks to display a higher gloss. It is used in offset, grinding varnishes and letterpress applications. 收起 | |
| Alpha-Rez™ 9250 E | Lawter | Alpha-Rez™ 9250 E is a hybrid resin composed of visco-elastic hydrocarbons and hybrid resins that display a high viscosity and medium solubility. The product has good water balance, low misting and low tack properties. It can be used in offset inks using ...展開 Alpha-Rez™ 9250 E is a hybrid resin composed of visco-elastic hydrocarbons and hybrid resins that display a high viscosity and medium solubility. The product has good water balance, low misting and low tack properties. It can be used in offset inks using fast-running printing processes. 收起 | |
| Benox® A-70 | UNITED INITIATORS GMBH & CO KG | Benox® A-70, in the form of a free-flowing water-wet granular, is dibenzoyl peroxide that is less flammable and shock sensitive in this form rather than in forms containing no or little water. It can be used as a polymerization initiator for unsaturated p...展開 Benox® A-70, in the form of a free-flowing water-wet granular, is dibenzoyl peroxide that is less flammable and shock sensitive in this form rather than in forms containing no or little water. It can be used as a polymerization initiator for unsaturated polyester resins and vinyl monomers, when the presence of water is not detrimental. Benox® A-70 has other uses, which include drying agents for printing inks, organic chemical synthesis, and vulcanization of synthetic and natural rubber. 收起 | |
| Benox® A-75 | UNITED INITIATORS GMBH & CO KG | Benox® A-75, in the form of a free-flowing water-wet granular, is dibenzoyl peroxide that is less flammable and shock sensitive in this form rather than in forms containing no or little water. It can be used as a polymerization initiator for unsaturated p...展開 Benox® A-75, in the form of a free-flowing water-wet granular, is dibenzoyl peroxide that is less flammable and shock sensitive in this form rather than in forms containing no or little water. It can be used as a polymerization initiator for unsaturated polyester resins and vinyl monomers, when the presence of water is not detrimental. Benox® A-75 has other uses, which include drying agents for printing inks, organic chemical synthesis, and vulcanization of synthetic and natural rubber. 收起 | |
| Benox® A-80 | UNITED INITIATORS GMBH & CO KG | Benox® A-80, in the form of a free-flowing water-wet granular, is dibenzoyl peroxide that is less flammable and shock sensitive in this form rather than in forms containing no or little water. It can be used as a polymerization initiator for unsaturated p...展開 Benox® A-80, in the form of a free-flowing water-wet granular, is dibenzoyl peroxide that is less flammable and shock sensitive in this form rather than in forms containing no or little water. It can be used as a polymerization initiator for unsaturated polyester resins and vinyl monomers, when the presence of water is not detrimental. Benox® A-80 has other uses, which include drying agents for printing inks, organic chemical synthesis, and vulcanization of synthetic and natural rubber. 收起 | |
| Benox® B-50 | UNITED INITIATORS GMBH & CO KG | Benox® B-50 is a fine dispersion of dibenzoyl peroxide in a smooth, non-separating fire resistant creamy paste form with a white or red thixotropic cream appearance. It can freely be dissolved in monomers and resins and is primarily used as a curing agent...展開 Benox® B-50 is a fine dispersion of dibenzoyl peroxide in a smooth, non-separating fire resistant creamy paste form with a white or red thixotropic cream appearance. It can freely be dissolved in monomers and resins and is primarily used as a curing agent and polymerization initiator for acrylic, monomeric vinyl, styrene, co-polymers, and unsaturated polyester/vinyl ester resins. Benox® B-50 can also be used in two-part adhesive systems based on methacylate or polyester resins. 收起 | |
| Benzophenone | Eutec Chemical Co., Ltd. | Benzophenone is an additive primarily used as an photoinitiator and sensitizer. Available as a white to off-white flake, with a melting point of 47-49℃, resulting in a clear transparent solution. This additive is suited for use with UV-cured resins in the...展開 Benzophenone is an additive primarily used as an photoinitiator and sensitizer. Available as a white to off-white flake, with a melting point of 47-49℃, resulting in a clear transparent solution. This additive is suited for use with UV-cured resins in the production of inks and coatings. 收起 | |
| Cinergi™ 1060 | Lawter | Cinergi™ 1060 is a sheet-fed free-flow varnish that is tack stable and retains body in an ink at high shear temperatures. Its lithographic characteristics ensure the varnish produces a high print performance in long and short press runs. It has high gloss...展開 Cinergi™ 1060 is a sheet-fed free-flow varnish that is tack stable and retains body in an ink at high shear temperatures. Its lithographic characteristics ensure the varnish produces a high print performance in long and short press runs. It has high gloss, good water balance with fast setting and low misting properties as added benefits. Cinergi™ 1060 is used in sheet-fed inks and wetting varnishes. 收起 | |
| Cinergi™ 1061 | Lawter | Cinergi™ 1061 is a sheet-fed fast setting gel varnish with high solids and medium quickset features that give it greater synergy and compatibility with a broad range of color systems. Inks that use the gel varnish show higher gloss and better color develo...展開 Cinergi™ 1061 is a sheet-fed fast setting gel varnish with high solids and medium quickset features that give it greater synergy and compatibility with a broad range of color systems. Inks that use the gel varnish show higher gloss and better color development and water balance. Cinergi™ 1061 is used in sheet-fed inks. 收起 | |
| Cinergi™ 2000 E | Lawter | Cinergi™ 2000 E is a special varnish that is 100% non-volatile and is based on modified vegetable oil blends. The product displays high gloss, low bronzing and good film formation in special inks such as sheet-fed, metal deco and web-fed applications. | |
| Cinergi™ 2091 A | Lawter | Cinergi™ 2091 A is a grinding and flushing vehicle that has been created to wet-out high pigment loads and to achieve maximum color development. It has good pigment wetting properties and shows press stability, high gloss, good transfer and leveling as we...展開 Cinergi™ 2091 A is a grinding and flushing vehicle that has been created to wet-out high pigment loads and to achieve maximum color development. It has good pigment wetting properties and shows press stability, high gloss, good transfer and leveling as well as fast set speeds. Cinergi™ 2091 A is used in sheet-fed and letterpress inks. 收起 | |
| Cinergi™ 8710 C | Lawter | Cinergi™ 8710 C is a sheet-fed gel varnish that is 78% non-volatile and is from phenolic modified rosin-based resins, vegetable oils, mineral distillates and gelling agents. It is fast setting and has good flow and high gloss features. Cinergi™ 8710 C als...展開 Cinergi™ 8710 C is a sheet-fed gel varnish that is 78% non-volatile and is from phenolic modified rosin-based resins, vegetable oils, mineral distillates and gelling agents. It is fast setting and has good flow and high gloss features. Cinergi™ 8710 C also possesses good transfer, tack stability with good shear and heat resistance. The varnish shows good water balance with a high resistance to water. It is used as a let down varnish or gel in quickset offset inks or sheet-fed inks. 收起 | |
| Cinergi™ 8735 C | Lawter | Cinergi™ 8735 C is a completely non-volatile let down varnish based on gelling agents, ester solvents, vegetable oil and phenolic-modified rosin-based resins. It displays good color strength along with gloss and fast setspeeds. The gel varnish also shows ...展開 Cinergi™ 8735 C is a completely non-volatile let down varnish based on gelling agents, ester solvents, vegetable oil and phenolic-modified rosin-based resins. It displays good color strength along with gloss and fast setspeeds. The gel varnish also shows good tack stability and a high resistance to water. Cinergi™ 8735 C is used as a let down varnish in quickset offset and sheet-fed offset inks and a variety of other offset inks. 收起 | |
| Cinergi™ 8760 C | Lawter | Cinergi™ 8760 C is a soya bean oil sheet-fed gel varnish with an 83% non-volatile composition and is based on soya bean oil, gelling agents, mineral distillates and phenolic-modified rosin-based resins. With 27% soya bean oil composition, the varnish show...展開 Cinergi™ 8760 C is a soya bean oil sheet-fed gel varnish with an 83% non-volatile composition and is based on soya bean oil, gelling agents, mineral distillates and phenolic-modified rosin-based resins. With 27% soya bean oil composition, the varnish shows good color strength and flow, combined with gloss and a fast setspeed. It also has good tack stability and a high resistance to water. Cinergi™ 8760 C is used as a let down varnish or gel in quickset offset and sheet-fed offset inks. 收起 | |
| Decotherm™ 100C | Lawter | Decotherm™ 100C is a metal decorating varnish created for inks that are used on drawn aluminum cans that are printed on a spindle press. It is used in standard steel and tin plate lithographic inks because of its faster cure rate. Apart from drawn aluminu...展開 Decotherm™ 100C is a metal decorating varnish created for inks that are used on drawn aluminum cans that are printed on a spindle press. It is used in standard steel and tin plate lithographic inks because of its faster cure rate. Apart from drawn aluminum cans and steel and tin plate lithographic inks, Decotherm™ 100C is also used on color cans, but not on white cans. 收起 | |
| Decotherm™ 1720C | Lawter | Decotherm™ 1720C is a metal decorating varnish that has been created for inks applied on drawn aluminum cans which are printed on a spindle press. It is used in standard steel and tin plate lithographic inks as a result of its faster cure rate. Decotherm™...展開 Decotherm™ 1720C is a metal decorating varnish that has been created for inks applied on drawn aluminum cans which are printed on a spindle press. It is used in standard steel and tin plate lithographic inks as a result of its faster cure rate. Decotherm™ 1720C has good pigment wetting and scratch resistance properties and apart from drawn aluminum cans and steel and tin plate lithographic inks, is also suitable for use in color cans and not white cans. 收起 | |
| Decotherm™ 210 E | Lawter | Decotherm™ 210 E is a 65% hydroxyl functional polyester resin that has high gloss, good printability and adhesion and good pigment wetting properties. Decotherm™ 210 E is meant for metal deco 2-piece cans, colored and white inks and spindle printing appli...展開 Decotherm™ 210 E is a 65% hydroxyl functional polyester resin that has high gloss, good printability and adhesion and good pigment wetting properties. Decotherm™ 210 E is meant for metal deco 2-piece cans, colored and white inks and spindle printing applications. 收起 | |
| Decotherm™ 260 E | Lawter | Decotherm™ 260 E is a polyester resin dissolved in tripropylene glycol that has the benefit of high pigment wetting, gloss, flow and transfer on high speed presses. It also has good adhesion to metals which is why it is considered ideal for use in metal d...展開 Decotherm™ 260 E is a polyester resin dissolved in tripropylene glycol that has the benefit of high pigment wetting, gloss, flow and transfer on high speed presses. It also has good adhesion to metals which is why it is considered ideal for use in metal deco inks. Such inks use the spindle printing or dry offset system of printing on 2-piece cans. 收起 | |
| Decotherm™ 290 E | Lawter | Decotherm™ 290 E is a structured polyester resin that has low tack and misting properties, shows good transfer on high speed presses and displays adhesion to metals. It is used in metal deco inks using the spindle printing or dry offset method for 2-piece...展開 Decotherm™ 290 E is a structured polyester resin that has low tack and misting properties, shows good transfer on high speed presses and displays adhesion to metals. It is used in metal deco inks using the spindle printing or dry offset method for 2-piece cans. It shows good color retention and is also used in white and colored ink applications. 收起 | |
| Eco-Rez™ 350 C | Lawter | Eco-Rez™ 350 C is a high viscosity rosin ester with a high viscosity and showing good tolerance for low KB oils. It is primarily an offset ink, but has the potential to be used in other applications like pigment dispersions, coatings and adhesives, sealan...展開 Eco-Rez™ 350 C is a high viscosity rosin ester with a high viscosity and showing good tolerance for low KB oils. It is primarily an offset ink, but has the potential to be used in other applications like pigment dispersions, coatings and adhesives, sealants and heat resistant inks. 收起 | |
| Eco-Rez™ 4237 C | Lawter | Eco-Rez™ 4237 C is a rosin-modified resin that is formaldehyde and phenol-free, showing low or medium solubility together with a high viscosity in mineral distillates. Compared to other phenolic rosin resins, it gives better gel response, lower tack and a...展開 Eco-Rez™ 4237 C is a rosin-modified resin that is formaldehyde and phenol-free, showing low or medium solubility together with a high viscosity in mineral distillates. Compared to other phenolic rosin resins, it gives better gel response, lower tack and a wider water window. Other advantages include good run resistance, low yellowing and odor and a high structure. Eco-Rez™ 4237 C is used in offset, web offset, heatset and coldset applications as well as in sheet-fed and gloss offsets and low odor inks. Lower color makes it ideal for use in overprint varnishes. 收起 | |
| Eco-Rez™ 9710 A | Lawter | Eco-Rez™ 9710 A is a phenol formaldehyde-free resin with a low-structured rosin resin providing good pigment wetting characteristics. It is part of the family of Eco-Rez™ products offering water balance and rheological stability with sharp imprint images ...展開 Eco-Rez™ 9710 A is a phenol formaldehyde-free resin with a low-structured rosin resin providing good pigment wetting characteristics. It is part of the family of Eco-Rez™ products offering water balance and rheological stability with sharp imprint images during long and high-speed press runs. Eco-Rez™ 9710 A is ideally suited to be used in sheet-fed, heatset and coldset applications. 收起 | |
| Eco-Rez™ 9730 A | Lawter | Eco-Rez™ 9730 A is a phenol formaldehyde-free resin that is part of a new generation of resins with greater rheological stability, sharp imprint images and water balance stability during long and high-speed press runs. Unlike prior phenol-free resins, the...展開 Eco-Rez™ 9730 A is a phenol formaldehyde-free resin that is part of a new generation of resins with greater rheological stability, sharp imprint images and water balance stability during long and high-speed press runs. Unlike prior phenol-free resins, the product provides a more sustainable chemistry option with improved levels of performance. Eco-Rez™ 9730 A is used in all offset inks including coldset, heatset and sheet-fed applications. 收起 | |
| Eco-Rez™ 9760 A | Lawter | Eco-Rez™ 9760 A is a phenol formaldehyde-free resin that provides an increased level of renewable content in line with a more sustainable approach to chemistry formulations. As part of the new products in the Eco-Rez™ line, the resin offers sharper print ...展開 Eco-Rez™ 9760 A is a phenol formaldehyde-free resin that provides an increased level of renewable content in line with a more sustainable approach to chemistry formulations. As part of the new products in the Eco-Rez™ line, the resin offers sharper print images and better rheological stability and water balance stability during long and high-speed press runs. Eco-Rez™ 9760 A is suitable for all offset inks including coldset, heatset and sheet-fed applications. 收起 | |
| Eusorb UV-5033 (BP-5) | Eutec Chemical Co., Ltd. | Eusorb UV-5033 (BP-5) is a white or light yellow powder crystal powdered form of 2-Hydroxy-4-methoxybenzene-5-sulfonic acid sodium salt. It can be used in coatings and printing inks for UV curing and as a UV absorber and light stabilizer for glass product...展開 Eusorb UV-5033 (BP-5) is a white or light yellow powder crystal powdered form of 2-Hydroxy-4-methoxybenzene-5-sulfonic acid sodium salt. It can be used in coatings and printing inks for UV curing and as a UV absorber and light stabilizer for glass products, Plastics, thermoplastics and polyethylene films . 收起 | |
| Eusorb UV-5411 | Eutec Chemical Co., Ltd. | Eusorb UV-5411 is a white to off-white crystalline powder with a melting point between 103-107℃ and a 0.1% Ash content. This product provides initial color and relatively low volatility making it an efficient UV-absorber for polyvinyl butyral (molding, sh...展開 Eusorb UV-5411 is a white to off-white crystalline powder with a melting point between 103-107℃ and a 0.1% Ash content. This product provides initial color and relatively low volatility making it an efficient UV-absorber for polyvinyl butyral (molding, sheet, glazing materials for window, lighting, sign, marine, and auto applications), coatings, photo products and sealants. 收起 | |
| Eusorb UV-P | Eutec Chemical Co., Ltd. | Eusorb UV-P is a pale yellow crystalline powder with a melting point between 128-132℃. This product is an efficient UV-absorber for styrenic polymers, PVC, unsaturated polyesters, PU, acrylic polymers, polycarbonates, adhesives and coatings. | |
| Eutex 127 | Eutec Chemical Co., Ltd. | Eutex 127 is a slightly green-yellow fine powder with a melting point between 216-222℃. This product is an efficient optical brightener for polymers, lacquers, printing inks and man-made fibers. | |
| Eutex KSN | Eutec Chemical Co., Ltd. | Eutex KSN is a yellow crystalline powder used as an optical brightener that provides white effects with neutral to bluish violet shade and excellent light fastness. It is suited for brightening of synthetic high polymers at any processing stage including ...展開 Eutex KSN is a yellow crystalline powder used as an optical brightener that provides white effects with neutral to bluish violet shade and excellent light fastness. It is suited for brightening of synthetic high polymers at any processing stage including printing inks and paints while requiring relatively small quantities. 收起 | |
| Eutex OB | Eutec Chemical Co., Ltd. | Eutex OB is a pale yellow-green fine powder of 2,2'-(2,5-Thiophenediyl)bis[5-tert-butylbenzoxazole] with a melting point between 197-203℃. This product is used as an optical brightener recommended for a variety clear lacquers, UV coatings and printing ink...展開 Eutex OB is a pale yellow-green fine powder of 2,2'-(2,5-Thiophenediyl)bis[5-tert-butylbenzoxazole] with a melting point between 197-203℃. This product is used as an optical brightener recommended for a variety clear lacquers, UV coatings and printing inks. 收起 | |
| Filtrez™ 521 A | Lawter | Filtrez™ 521 A is a fumaric modified rosin ester, soluble in alcohol with a high acid value and softening point. The product's broad compatibility and solubility allow it to be an important consideration in flexographic printing inks. | |
| Filtrez™ 526 A | Lawter | Filtrez™ 526 A is a fumaric modified rosin ester that is soluble in alcohol and because it needs minimal amine due to the low acid value, it shows a faster drying time. Its high viscosity in water results in lower resin solids emerging in the final ink. F...展開 Filtrez™ 526 A is a fumaric modified rosin ester that is soluble in alcohol and because it needs minimal amine due to the low acid value, it shows a faster drying time. Its high viscosity in water results in lower resin solids emerging in the final ink. Filtrez™ 526 A is suitable for use in gravure and flexographic inks and coatings. 收起 | |
| Flex-Rez™ 0080 CS | Lawter | Flex-Rez™ 0080 CS is a co-solvent soluble polyamide resin that has good flexibility, chemical resistance and film formation. It provides good adhesion on films like treated polyethylene and polypropylene, cellophane, aluminum and other foil-coated substra...展開 Flex-Rez™ 0080 CS is a co-solvent soluble polyamide resin that has good flexibility, chemical resistance and film formation. It provides good adhesion on films like treated polyethylene and polypropylene, cellophane, aluminum and other foil-coated substrates. The resin is used in gravure and flexographic inks, in overprint varnishes as well as cold seal release lacquers. 收起 | |
| Flex-Rez™ 0100 CS | Lawter | Flex-Rez™ 0100 CS is a co-solvent soluble polyamide resin that has good chemical resistance, flexibility and film formation and offers good adhesion on various films like polypropylene and polyethylene. It is compatible with phenolic and maleic resins and...展開 Flex-Rez™ 0100 CS is a co-solvent soluble polyamide resin that has good chemical resistance, flexibility and film formation and offers good adhesion on various films like polypropylene and polyethylene. It is compatible with phenolic and maleic resins and displays low viscosity for increased solids. Flex-Rez™ 0100 CS is suitable for use in flexographic and gravure inks, in overprint varnishes and cold seal release lacquers. 收起 | |
| Flex-Rez™ 0120 CS | Lawter | Flex-Rez™ 0120 CS is a co-solvent soluble polyamide resin that has good flexibility, film formation and chemical resistance as well as providing good adhesion on films like polypropylene, polyethylene, nylon and foil-coated substrates. It is compatible wi...展開 Flex-Rez™ 0120 CS is a co-solvent soluble polyamide resin that has good flexibility, film formation and chemical resistance as well as providing good adhesion on films like polypropylene, polyethylene, nylon and foil-coated substrates. It is compatible with phenolic and maleic resins and displays good formulating flexibility. Flex-Rez™ 0120 CS is suitable for use in flexographic and gravure inks, overprint varnishes and cold seal release lacquers. 收起 | |
| Flex-Rez™ 1060 CS | Lawter | Flex-Rez™ 1060 CS is a co-solvent soluble polyamide resin that displays good adhesion on various films, provides good film formation as well as showing flexibility and chemical resistance. It is compatible with phenolic and maleic resins and has applicati...展開 Flex-Rez™ 1060 CS is a co-solvent soluble polyamide resin that displays good adhesion on various films, provides good film formation as well as showing flexibility and chemical resistance. It is compatible with phenolic and maleic resins and has applications in flexographic and gravure inks, overprint varnishes and cold seal release lacquers. 收起 | |
| Flex-Rez™ 1066 CS | Lawter | Flex-Rez™ 1066 CS is a co-solvent soluble polyamide resin that displays good film formation, flexibility and chemical resistance with adhesion on various films like polyethylene, nylon, polypropylene and foil-coated substrates. It is compatible with pheno...展開 Flex-Rez™ 1066 CS is a co-solvent soluble polyamide resin that displays good film formation, flexibility and chemical resistance with adhesion on various films like polyethylene, nylon, polypropylene and foil-coated substrates. It is compatible with phenolic and maleic resins, rosins and rosin derivatives and is considered suitable for use in flexographic and gravure inks, overprint varnishes and cold seal release lacquers. 收起 | |
| Flex-Rez™ 1074 CS | Lawter | Flex-Rez™ 1074 CS is a co-solvent soluble polyamide resin that shows good chemical resistance, flexibility and film formation. It also displays good adhesion on films like treated polyethylene, cellophane, nylon, glassine, polypropylene and other foil coa...展開 Flex-Rez™ 1074 CS is a co-solvent soluble polyamide resin that shows good chemical resistance, flexibility and film formation. It also displays good adhesion on films like treated polyethylene, cellophane, nylon, glassine, polypropylene and other foil coated substrates. Flex-Rez™ 1074 CS shows compatibility with phenolic and maleic resins, rosin derivatives and rosins. It has good formulating flexibility and a low viscosity. The product is ideally suited for use in flexographic and gravure inks, in cold seal release lacquers and in overprint varnishes. 收起 | |
| Flex-Rez™ 1084 AS | Lawter | Flex-Rez™ 1084 AS is an alcohol soluble polyamide resin with a high melt point that should be considered in applications requiring high heat resistance. The resin won't gel at low temperatures, but when added to polyamide inks, it will give off partial ge...展開 Flex-Rez™ 1084 AS is an alcohol soluble polyamide resin with a high melt point that should be considered in applications requiring high heat resistance. The resin won't gel at low temperatures, but when added to polyamide inks, it will give off partial gel resistance. Flex-Rez™ 1084 AS provides film hardness making it suitable as a modifier for improving rub, scratch and grease resistance. The resin presents ideal opportunities for the creation of unique, high-performance inks, applicable in various synthetic polymer substrates. Flex-Rez™ 1084 AS is used in gravure and flexographic inks and in overprint varnishes and coatings. 收起 | |
| Flex-Rez™ 1094 CS | Lawter | Flex-Rez™ 1094 CS is a co-solvent soluble polyamide resin that has good flexibility, chemical resistance and film formation, along with good gel, water, alkali, lard and grease resistance properties. It provides good adhesion on films like treated polyeth...展開 Flex-Rez™ 1094 CS is a co-solvent soluble polyamide resin that has good flexibility, chemical resistance and film formation, along with good gel, water, alkali, lard and grease resistance properties. It provides good adhesion on films like treated polyethylene, aluminum, nylon, polypropylene and other foil coated substrates. Flex-Rez™ 1094 CS is compatible with phenolic and maleic resins, rosin derivatives and rosins. It is commonly used in flexographic and gravure inks, in cold seal release lacquers and in overprint varnishes. 收起 | |
| Flex-Rez™ 1104 LCS | Lawter | Flex-Rez™ 1104 LCS is a co-solvent soluble polyamide resin that shows good flexibility, chemical resistance and film formation. It displays good adhesion on films like nylon, polyethylene, glassine, polypropylene and foil-coated substrates. Flex-Rez™ 1104...展開 Flex-Rez™ 1104 LCS is a co-solvent soluble polyamide resin that shows good flexibility, chemical resistance and film formation. It displays good adhesion on films like nylon, polyethylene, glassine, polypropylene and foil-coated substrates. Flex-Rez™ 1104 LCS is compatible with phenolic and maleic resins, rosin derivatives and rosins. It shows lower viscosity for increased solids and good formulating flexibility. It is considered suitable for use in gravure and flexographic inks, overprint varnishes and cold seal release lacquers. 收起 | |
| Flex-Rez™ 1155 AS | Lawter | Flex-Rez™ 1155 AS is an alcohol soluble polyamide resin combining alcohol solubility with nitrocellulose compatibility to create flexographic inks that have good runability and gloss. It shows tolerance for ester solvents and its high solubility and degre...展開 Flex-Rez™ 1155 AS is an alcohol soluble polyamide resin combining alcohol solubility with nitrocellulose compatibility to create flexographic inks that have good runability and gloss. It shows tolerance for ester solvents and its high solubility and degree of compatibility allows it to be ideal for pigment wetting applications. Flex-Rez™ 1155 AS has good gel resistance as well as water, alkali, lard, oil and grease resistance properties. Further, it displays high gloss, adhesion and film forming capabilities. Flex-Rez™ 1155 AS is suitable for use in gravure and flexographic inks, in overprint varnishes and coatings and in cold seal release lacquers. 收起 | |
| Flex-Rez™ 2433 AD | Lawter | Flex-Rez™ 2433 AD is an alcohol dilutable polyamide resin that has good wet pack resistance along with adhesion to substrates like polypropylene, polyethylene and coated foils. It also has good pigment dispersion, high gloss, low odor and makes for ideal ...展開 Flex-Rez™ 2433 AD is an alcohol dilutable polyamide resin that has good wet pack resistance along with adhesion to substrates like polypropylene, polyethylene and coated foils. It also has good pigment dispersion, high gloss, low odor and makes for ideal use in gravure and flexographic inks and in coatings and overprint varnishes. 收起 | |
| Flex-Rez™ 2445 AD | Lawter | Flex-Rez™ 2445 AD is an alcohol dilutable polyamide resin that has good wet-pack resistance together with suitable adhesion on substrates like polypropylene, polyethylene and coated foils. Among the benefits of the resin include good gel and heat resistan...展開 Flex-Rez™ 2445 AD is an alcohol dilutable polyamide resin that has good wet-pack resistance together with suitable adhesion on substrates like polypropylene, polyethylene and coated foils. Among the benefits of the resin include good gel and heat resistance properties, high gloss and pigment wetting features and film forming capabilities. Flex-Rez™ 2445 AD is suitable for use in gravure and flexographic inks, coatings and overprint varnishes and in cold seal release lacquers. 收起 | |
| Flex-Rez™ 3370 CS | Lawter | Flex-Rez™ 3370 CS is a co-solvent polyamide resin that helps to improve gel resistance and is considered suitable for use in flexo and gravure inks as well as in lacquers for polyolefin films. | |
| Flex-Rez™ 4399 AD | Lawter | Flex-Rez™ 4399 AD is an alcohol dilutable polyamide resin that shows good wet-pack resistance as well as good adhesion on substrates like polypropylene, polyethylene and coated foils. It also has good pigment dispersion properties, high gloss, low odor an...展開 Flex-Rez™ 4399 AD is an alcohol dilutable polyamide resin that shows good wet-pack resistance as well as good adhesion on substrates like polypropylene, polyethylene and coated foils. It also has good pigment dispersion properties, high gloss, low odor and film forming benefits. Flex-Rez™ 4399 AD is ideal for use in gravure and flexographic inks and in overprint varnishes and coatings. 收起 | |
| Flex-Rez™ 4512 AS | Lawter | Flex-Rez™ 4512 AS is an alcohol soluble polyamide resin that combines good alcohol solubility with nitrocellulose compatibility to form flexographic inks with outstanding gloss and runability. It shows ideal tolerance for ester solvents and its high solub...展開 Flex-Rez™ 4512 AS is an alcohol soluble polyamide resin that combines good alcohol solubility with nitrocellulose compatibility to form flexographic inks with outstanding gloss and runability. It shows ideal tolerance for ester solvents and its high solubility and high degree of compatibility make it suitable for pigment wetting applications. Flex-Rez™ 4512 AS also has good gel, water and deep freeze resistance as well as high gloss and low viscosity characteristics. The resin is suitable for use in gravure and flexographic inks and in overprint varnishes and coatings. 收起 | |
| Flex-Rez™ 4584 AD | Lawter | Flex-Rez™ 4584 AD is an alcohol dilutable polyamide resin that displays good wet-pack resistance, good adhesion on substrates and coated foils as well as expert pigment dispersion properties. It also shows high gloss and good gel resistance making it suit...展開 Flex-Rez™ 4584 AD is an alcohol dilutable polyamide resin that displays good wet-pack resistance, good adhesion on substrates and coated foils as well as expert pigment dispersion properties. It also shows high gloss and good gel resistance making it suitable for use in gravure and flexographic inks, in overprint varnishes and coatings and in cold seal release lacquers. 收起 | |
| Flex-Rez™ 5111 AD | Lawter | Flex-Rez™ 5111 AD is an alcohol dilutable polyamide resin with good wet-pack resistance, good adhesion on substrates and coated foils as well as good pigment dispersion characteristics. It also shows block and gel resistance as well as high gloss that con...展開 Flex-Rez™ 5111 AD is an alcohol dilutable polyamide resin with good wet-pack resistance, good adhesion on substrates and coated foils as well as good pigment dispersion characteristics. It also shows block and gel resistance as well as high gloss that contribute to making Flex-Rez™ 5111 AD suitable for use in gravure and flexographic inks and in overprint varnishes and coatings. 收起 | |
| Flex-Rez™ 6243AS | Lawter | Flex-Rez™ 6243AS is an alcohol soluble polyamide resin with a high melt point in a resin that can be used in overprints and inks that need high heat resistance. It has high gloss, is soluble in alcohol and displays flexibility, color and adhesion like oth...展開 Flex-Rez™ 6243AS is an alcohol soluble polyamide resin with a high melt point in a resin that can be used in overprints and inks that need high heat resistance. It has high gloss, is soluble in alcohol and displays flexibility, color and adhesion like other commercial polyamide resins. Flex-Rez™ 6243AS dries to a hard film composition creating water resistant, acid, alkali and grease resistant properties as well as block, ice-crinkle and rub characteristics. It does not gel at low temperatures, but can boost gel resistance of standard polyamide inks. Flex-Rez™ 6243AS is ideal for use in gravure and flexographic inks, overprint varnishes and coatings. 收起 | |
| Flexonic™ EN41 E | Lawter | Flexonic™ EN41 E is a polyethylene emulsion that displays scratch, rub, slip and block resistant properties. It is used as an additive in water-based coatings, inks and overprint varnishes and has good compatibility with styrene acrylics and acrylics. The...展開 Flexonic™ EN41 E is a polyethylene emulsion that displays scratch, rub, slip and block resistant properties. It is used as an additive in water-based coatings, inks and overprint varnishes and has good compatibility with styrene acrylics and acrylics. The product is used in aqueous inks and coatings. 收起 | |
| Flexonic™ W378 E | Lawter | Flexonic™ W378 E is a polyethylene emulsion that is APE-free and exhibits scratch, rub, slip and block resistant properties. It has minimal effect on gloss, while showing good compatibility with styrene acrylics and acrylics. The product is used in aqueou...展開 Flexonic™ W378 E is a polyethylene emulsion that is APE-free and exhibits scratch, rub, slip and block resistant properties. It has minimal effect on gloss, while showing good compatibility with styrene acrylics and acrylics. The product is used in aqueous inks and coatings. 收起 | |
| Fluoron™ 735 A | Lawter | Fluoron™ 735 A is a blend of PTFE dispersed in a non-volatile lubricating paste in a high performance additive that gives good slip and rub. It narrows particle size distribution, has minimal effect on rheology and gloss and has good abrasion and mar resi...展開 Fluoron™ 735 A is a blend of PTFE dispersed in a non-volatile lubricating paste in a high performance additive that gives good slip and rub. It narrows particle size distribution, has minimal effect on rheology and gloss and has good abrasion and mar resistance properties. Fluoron™ 735 A is used in heatset offset inks, sheet-fed offset inks and in overprint varnishes. 收起 | |
| Hydro-Rez™ 1100D | Lawter | Hydro-Rez™ 1100D is a sulfopolyester resin for water-based liquid inks that displays high gloss and good pigment wetting properties. It has an ideal lay of aluminum (metallization), has good resolubility, alcohol resistance and easy wash-up. Hydro-Rez™ 11...展開 Hydro-Rez™ 1100D is a sulfopolyester resin for water-based liquid inks that displays high gloss and good pigment wetting properties. It has an ideal lay of aluminum (metallization), has good resolubility, alcohol resistance and easy wash-up. Hydro-Rez™ 1100D is suitable for use in metallic inks, pigment dispersions and pre and post-metal primers. 收起 | |
| Hydro-Rez™ 1200D2 | Lawter | Hydro-Rez™ 1200D2 is a sulfopolyester resin for water-based liquid inks that displays adhesion to metal surfaces and has good alcohol and water resistance properties. It is suitable for use in metallic inks, pre and post-metal primers and pigment dispersi...展開 Hydro-Rez™ 1200D2 is a sulfopolyester resin for water-based liquid inks that displays adhesion to metal surfaces and has good alcohol and water resistance properties. It is suitable for use in metallic inks, pre and post-metal primers and pigment dispersions. 收起 | |
| Hydro-Rez™ 1400D | Lawter | Hydro-Rez™ 1400D is a sulfopolyester resin for water-based liquid inks with a low glass transition temperature (Tg), good lamination bond strength and adhesion to polyester films as well as an easy wash-up. It is used in film-forming co-resins and laminat...展開 Hydro-Rez™ 1400D is a sulfopolyester resin for water-based liquid inks with a low glass transition temperature (Tg), good lamination bond strength and adhesion to polyester films as well as an easy wash-up. It is used in film-forming co-resins and lamination applications. 收起 | |
| Hydro-Rez™ 2007E | Lawter | Hydro-Rez™ 2007E is a solid acrylic resin with a low molecular weight intended for high-gloss OPV's. It is considered ideal for use in flexo and gravure inks and OPV applications. | |
| Hydro-Rez™ 2710E | Lawter | Hydro-Rez™ 2710E is a solid acrylic resin for water-based liquid inks that has good strength and pigment wetting properties. It is considered ideal for use in flexo and gravure inks and OPV applications. | |
| Hydro-Rez™ 5614 A | Lawter | Hydro-Rez™ 5614 A is a fumarated modified rosin ester that can be dispersed in water with amines, ammonia or morpholine and is also soluble in alcohol. It displays fast water release in aqueous inks, exhibits good flexibility and low viscosity and its hig...展開 Hydro-Rez™ 5614 A is a fumarated modified rosin ester that can be dispersed in water with amines, ammonia or morpholine and is also soluble in alcohol. It displays fast water release in aqueous inks, exhibits good flexibility and low viscosity and its high melting point ensures good leveling and fast solvent release. The product is particularly recommended for use in flexographic inks, while also finding uses in gravure, carton and specialty inks and spirit varnishes. 收起 | |
| Hydro-Rez™ 5626 A | Lawter | Hydro-Rez™ 5626 A is a fumarated rosin ester that can be dispersed in water with morpholine, ammonia or amines and shows solubility in alcohol. A high melting point provides good leveling and fast solvent release and shows compatibility with manila resins...展開 Hydro-Rez™ 5626 A is a fumarated rosin ester that can be dispersed in water with morpholine, ammonia or amines and shows solubility in alcohol. A high melting point provides good leveling and fast solvent release and shows compatibility with manila resins, shellac and most acrylic resins and dispersions. It offers high gloss, a high softening point, flexibility and good color and odor. The product is used in gravure and flexographic inks, overprint varnishes, specialty varnishes, spirit varnishes and carton inks. 收起 | |
| Hydro-Rez™ 6200 A | Lawter | Hydro-Rez™ 6200 A is a fumaric modified rosin ester soluble in alcohol or able to be dispersed in water with morpholine or ammonia. Its high melting point enhances fast solvent release and good leveling as well as providing compatibility with manila resin...展開 Hydro-Rez™ 6200 A is a fumaric modified rosin ester soluble in alcohol or able to be dispersed in water with morpholine or ammonia. Its high melting point enhances fast solvent release and good leveling as well as providing compatibility with manila resins and shellac. The rosin ester promotes gloss and leveling in floor polishes and is ideal for use in water-based or solvent flexographic inks. Hydro-Rez™ 6200 A can also be used in carton and specialty inks and in spirit varnishes. 收起 | |
| Leuco Crystal Violet | Eutec Chemical Co., Ltd. | Leuco Crystal Violet or Tris(4-dimethylaminophenyl) methane is a clear solution white crystalline powder. This product is used as an indicator dye for radiation-curable imaging systems. | |
| Luminex™ 70 A | Lawter | Luminex™ 70 A is a heatset gel vehicle that displays good solubility, gloss, transfer and lithographic performance. It also has good water balance, solvent release and a sharp dot structure. The product is suitable for use in heatset offset prints. | |
| Miradull™ 7060 A | Lawter | Miradull™ 7060 A is a dull sheet-fed overprint varnish that shows a dull and gloss contrast of the printed materials. It has good drying properties and withstands burnishing. The product also displays resistance to piling, good transfer, a light color and...展開 Miradull™ 7060 A is a dull sheet-fed overprint varnish that shows a dull and gloss contrast of the printed materials. It has good drying properties and withstands burnishing. The product also displays resistance to piling, good transfer, a light color and is considered ideal for use in overprints. 收起 | |
| Miradull™ 8689 QL | Lawter | Miradull™ 8689 QL is an overprint varnish comprised of blended oils and is considered a varnish with driers, wax and matting agents. It has very dull OPV and shows resistance to polishing. Miradull™ 8689 QL is used in overprint varnishes for sheet-fed app...展開 Miradull™ 8689 QL is an overprint varnish comprised of blended oils and is considered a varnish with driers, wax and matting agents. It has very dull OPV and shows resistance to polishing. Miradull™ 8689 QL is used in overprint varnishes for sheet-fed applications. 收起 | |
| Miradull™ E | Lawter | Miradull™ E is an overprint varnish from rosin-based resins, matting agents, alkyd resins, driers, waxes and mineral distillates. It has high rub and "polish" resistance, with a high amount of matting. It is fast drying and setting with low yellowing pro...展開 Miradull™ E is an overprint varnish from rosin-based resins, matting agents, alkyd resins, driers, waxes and mineral distillates. It has high rub and "polish" resistance, with a high amount of matting. It is fast drying and setting with low yellowing properties. The product is used in offset inks, sheet-fed and heatset inks. 收起 | |
| Miraglaze™ 22 A | Lawter | Miraglaze™ 22 A is an overprint varnish that has been created to give a great combination of light color, alcohol resistance, high gloss, drying speed and good rub and slip properties. Miraglaze™ 22 A is suitable for use in commercial sheet-fed and foldin...展開 Miraglaze™ 22 A is an overprint varnish that has been created to give a great combination of light color, alcohol resistance, high gloss, drying speed and good rub and slip properties. Miraglaze™ 22 A is suitable for use in commercial sheet-fed and folding carton sheet-fed inks as well as overprint varnishes. 收起 | |
| Miraglaze™ 8614 A | Lawter | Miraglaze™ 8614 A is a workhorse sheet-fed overprint varnish made for good tack stability and maximum hardness. It comes as a dry-trapped or wet product that is ideal for commercial and folding carton applications. The product has a high gloss finish with...展開 Miraglaze™ 8614 A is a workhorse sheet-fed overprint varnish made for good tack stability and maximum hardness. It comes as a dry-trapped or wet product that is ideal for commercial and folding carton applications. The product has a high gloss finish with minimal yellow and good rub characteristics. It also has ink driers and wax to enhance the formation of necessary print properties, making it suitable for use in overprints and wet or dry trapped applications. 收起 | |
| Miraglaze™ 8909 E | Lawter | Miraglaze™ 8909 E is an overprint varnish with 70% non-volatile composition derived from DCO, gelling agents, tung oil, mineral distillates and rosin-based resins. It shows a high gloss with fast drying and setting properties. Miraglaze™ 8909 E also exhib...展開 Miraglaze™ 8909 E is an overprint varnish with 70% non-volatile composition derived from DCO, gelling agents, tung oil, mineral distillates and rosin-based resins. It shows a high gloss with fast drying and setting properties. Miraglaze™ 8909 E also exhibits low yellowing, good tack stability and leveling features and is considered ideal in offset inks, overprint varnishes and wet-on-dry and wet-on-wet applications. 收起 | |
| Optilith™ 1486 A | Lawter | Optilith™ 1486 A is an anti-oxidant additive with a low viscosity solution that acts to minimize the effect on drying time, while maximizing the "stay open" time. It also has anti-skinning properties and is pumpable for easy transfer and dispersion. Optil...展開 Optilith™ 1486 A is an anti-oxidant additive with a low viscosity solution that acts to minimize the effect on drying time, while maximizing the "stay open" time. It also has anti-skinning properties and is pumpable for easy transfer and dispersion. Optilith™ 1486 A is recommended for use in heatset offset and sheet-fed offset inks. 收起 | |
| Optilith™ 4 A | Lawter | Optilith™ 4 A is a water-fighting additive that has a low volatile and high solids lubricating compound. It is able to reduce water pick-up in lithographic inks and is functional across a variety of fountain solutions. Optilith™ 4 A is ideally suited for ...展開 Optilith™ 4 A is a water-fighting additive that has a low volatile and high solids lubricating compound. It is able to reduce water pick-up in lithographic inks and is functional across a variety of fountain solutions. Optilith™ 4 A is ideally suited for use in heatset and sheet-fed offset inks and in flushing vehicles. 收起 | |
| Photocure 1100 | Eutec Chemical Co., Ltd. | Photocure 1100 is a pale yellow powder and an efficient photoinitiator suitable for imaging applications in color filter resists & resists for production of black matrix, column spacers, overcoats & passivation films of liquid crystal displays. However, ...展開 Photocure 1100 is a pale yellow powder and an efficient photoinitiator suitable for imaging applications in color filter resists & resists for production of black matrix, column spacers, overcoats & passivation films of liquid crystal displays. However, this product also has temperature process characteristics, absorption properties and exhibits curing performance in highly pigmented resist formulations with only a low concentration necessary. 收起 | |
| Photocure 2240 | Eutec Chemical Co., Ltd. | Photocure 2240 is a white to off-white crystalline powder of o-methyl benzoyl benzoate with a melting point between 48-54℃. This product is an odorless photosensitizer for UV-curable systems. | |
| Photocure 251 | Eutec Chemical Co., Ltd. | Photocure 251 is 4-Chlorobenzophenone and a white to off-white crystalline powder used as an odorless photosensitizer for UV-curable systems. This product has a melting point between 75-77℃. | |
| Photocure 2959 | Eutec Chemical Co., Ltd. | Photocure 2959 is a white powder and a non-yellowing photoinitiator for UV-curable systems. This product is commonly used when little odor is required and for water-borne UV-curable systems. In addition, an active hydroxyl group can be reacted with suita...展開 Photocure 2959 is a white powder and a non-yellowing photoinitiator for UV-curable systems. This product is commonly used when little odor is required and for water-borne UV-curable systems. In addition, an active hydroxyl group can be reacted with suitable functionalized unsaturated resins. 收起 | |
| Photocure 304 (BMS) | Eutec Chemical Co., Ltd. | Photocure 304 (BMS) is a white crystalline powder with a 73-85℃ melting point. This product is an efficient photoinitiator used in UV-curable printing inks, wood varnishes, decorative coatings for metal cans, clear lacquers, pigmented coatings. | |
| Photocure 369 | Eutec Chemical Co., Ltd. | Photocure 369 is a clear solution light yellow crystalline powder with a melting point between 110-119℃. This product is used an an efficient photoinitiator for non-white pigmented UV-curable systems. | |
| Photocure 393 | Eutec Chemical Co., Ltd. | Photocure 393 is a white crystalline powder of tribromomethyl phenylsulfone with a melting point of 142℃. This product is an efficient photoinitiator for photosensitive polymers which are used in PS plate, dry film resist, photo resist and other functions...展開 Photocure 393 is a white crystalline powder of tribromomethyl phenylsulfone with a melting point of 142℃. This product is an efficient photoinitiator for photosensitive polymers which are used in PS plate, dry film resist, photo resist and other functions. 收起 | |
| Photocure 400 | Eutec Chemical Co., Ltd. | Photocure 400 is an orange crystalline powder of 1,3-Bis(p-dimethylaminobenzylidene) acetone. This product is an efficient photosensitizer for a bimolecular visible light photosensitive imaging systems. It has a maximum absorption of 450 nm and can sensit...展開 Photocure 400 is an orange crystalline powder of 1,3-Bis(p-dimethylaminobenzylidene) acetone. This product is an efficient photosensitizer for a bimolecular visible light photosensitive imaging systems. It has a maximum absorption of 450 nm and can sensitize a photoinitiator to shift to 405 nm absorption. 收起 | |
| Photocure 4196 | Eutec Chemical Co., Ltd. | Photocure 4196 is a white to off-white crystalline flake of 4-Methylbenzophenone with a melting point between 55-57℃. This product is used as a photoinitiator for UV-cured coatings, inks & resists. | |
| Photocure 50 | Eutec Chemical Co., Ltd. | Photocure 50 or 2-Hydroxy-2-methyl-phenyl-propane-1-one is a clear solution light yellow and transparent liquid. This product is used as an efficient photoinitiator for UV-curable systems to provide non-yellowing. | |
| Photocure 51 | Eutec Chemical Co., Ltd. | Photocure 51 is benzil dimethylketal and a white crystalline solid. This product is a highly efficient photoinitiator for UV-curable systems. | |
| Photocure 550 | Eutec Chemical Co., Ltd. | Photocure 550 is a slightly yellow liquid of Methyl Benzoylformate. This product is an efficient photo initiator for UV-curable systems that provides non-yellowing durability and longer shelf life for UV-curable systems. | |
| Photocure 784 | Eutec Chemical Co., Ltd. | Photocure 784 is a yellow to orange powder with a melting point of 160-170℃. This product is an efficient photoinitiator for pigmented UV-curable systems, photoresists and printing plates | |
| Photocure 81 | Eutec Chemical Co., Ltd. | Photocure 81 is liquid benzophenone and a low viscosity clear and light yellow oily liquid photoinitiator at room temperature. This product has good efficiency, complete solubility and is easily combined making it useful for UV-curable systems to replace ...展開 Photocure 81 is liquid benzophenone and a low viscosity clear and light yellow oily liquid photoinitiator at room temperature. This product has good efficiency, complete solubility and is easily combined making it useful for UV-curable systems to replace Benzophenone, especially for formulations of UV inks & resists. 收起 | |
| Photocure 819 | Eutec Chemical Co., Ltd. | Photocure 819 is a yellow crystalline powder of Bis(2,4,6-trimethylbenzoyl)-phenylphosphineoxide. This product has a melting point between 127-133℃ and is used as an efficient photoinitiator for UV-curable systems. | |
| Photocure 84 | Eutec Chemical Co., Ltd. | Photocure 84 is a white crystalline powdered 1-Hydroxy cyclohexyl phenyl ketone and an efficient photoinitiator for UV-curable systems with non-yellowing durability and longer shelf life. This product has a 47-50℃ melting point and 0.5% max loss on drying...展開 Photocure 84 is a white crystalline powdered 1-Hydroxy cyclohexyl phenyl ketone and an efficient photoinitiator for UV-curable systems with non-yellowing durability and longer shelf life. This product has a 47-50℃ melting point and 0.5% max loss on drying. 收起 | |
| Photocure 900 (B-CIM) | Eutec Chemical Co., Ltd. | Photocure 900 (B-CIM) is a clear solution yellow crystalline powdered 2,2’-Bis-(2-Chlorophenyl)-4,5,4’,5’- tetraphenyl-2’H-biimidazolyl. It is used as a photoinitiator for photosensitive polymers in PS plate, dry film resist, photo resist and other functi...展開 Photocure 900 (B-CIM) is a clear solution yellow crystalline powdered 2,2’-Bis-(2-Chlorophenyl)-4,5,4’,5’- tetraphenyl-2’H-biimidazolyl. It is used as a photoinitiator for photosensitive polymers in PS plate, dry film resist, photo resist and other functions. 收起 | |
| Photocure 907 | Eutec Chemical Co., Ltd. | Photocure 907 is a clear solution white to off-white crystalline powder with a melting point between 72-75℃. This product is used as an efficient photoinitiator for pigmented UV-curable systems, photoresists and printing plates. | |
| Photocure 980 | Eutec Chemical Co., Ltd. | Photocure 980 is a white to off-white crystalline powder of 2,4,5-Triarylimidazole derivative. This product is an efficient photoinitiator for photosensitive polymers which are used in PS plate, dry film resist and photo resist. It is soluble in most or...展開 Photocure 980 is a white to off-white crystalline powder of 2,4,5-Triarylimidazole derivative. This product is an efficient photoinitiator for photosensitive polymers which are used in PS plate, dry film resist and photo resist. It is soluble in most organic solvents and contains a characteristic UV absorption that is more red-shifted to the radiation source of i-line than the conventional BCIM. 收起 | |
| Photocure 9PA | Eutec Chemical Co., Ltd. | Photocure 9PA is a yellow powder of 9-Phenylacridine. This product has a minimum melting point of 184℃ and an efficient photoinitiator for photosensitive polymers. | |
| Photocure DETX | Eutec Chemical Co., Ltd. | Photocure DETX is a yellow crystalline powder of 2,4-diethylthioxanthone and an efficient photoinitiator with a melting point between 65-75℃. This product is used for printing inks, wood varnishes, decorative coatings for metal cans and food cartons, adhe...展開 Photocure DETX is a yellow crystalline powder of 2,4-diethylthioxanthone and an efficient photoinitiator with a melting point between 65-75℃. This product is used for printing inks, wood varnishes, decorative coatings for metal cans and food cartons, adhesives, pressure transfer sheets and photo resists. 收起 | |
| Photocure EAB | Eutec Chemical Co., Ltd. | Photocure EAB is a light yellow to light yellow-green crystalline powder with a minimum melting point of 92℃. This product is an efficient photosensitizer used in UV-cured inks and resists. | |
| Photocure EAQ | Eutec Chemical Co., Ltd. | Photocure EAQ is a light yellow crystalline powder or flake of 2-Ethylanthraquinone with a melting point between 107-111℃. This product is an efficient photoinitiators for photosensitive polymers. | |
| Photocure EDB | Eutec Chemical Co., Ltd. | Photocure EDB or Ethyl 4-N,N-dimethylaminobenzoate is a clear solution white crystalline powder used as an efficient photoactivator. When this product is used in combination with other photoinitiators it can convert energy transfer into free radicals and...展開 Photocure EDB or Ethyl 4-N,N-dimethylaminobenzoate is a clear solution white crystalline powder used as an efficient photoactivator. When this product is used in combination with other photoinitiators it can convert energy transfer into free radicals and start photopolymerization of suitable resin formulations. 收起 | |
| Photocure EHDB | Eutec Chemical Co., Ltd. | Photocure EHDB or 2-Ethylhexyl-4-N,N-dimethylamino-benzoate is a pale yellow clear liquid used as an efficient photoactivator. When this product is used in combination with other photoinitiators it can convert energy transfer into free radicals and start ...展開 Photocure EHDB or 2-Ethylhexyl-4-N,N-dimethylamino-benzoate is a pale yellow clear liquid used as an efficient photoactivator. When this product is used in combination with other photoinitiators it can convert energy transfer into free radicals and start photopolymerization of suitable resin formulations. 收起 | |
| Photocure IDB | Eutec Chemical Co., Ltd. | Photocure IDB is a pale yellow liquid of Isoamyl 4-N,N-dimethylaminobenzoate. This product is an efficient photoactivator which can be used with photoinitiators to convert energy transfer intro free radicals and initiate photopolymerization of suitable re...展開 Photocure IDB is a pale yellow liquid of Isoamyl 4-N,N-dimethylaminobenzoate. This product is an efficient photoactivator which can be used with photoinitiators to convert energy transfer intro free radicals and initiate photopolymerization of suitable resin formulations. 收起 | |
| Photocure ITX-P | Eutec Chemical Co., Ltd. | Photocure ITX-P is a yellow crystalline powder of 2-Isopropylthioxanthone with a melting point between 70-76℃. This product is an efficient photoinitiator for printing inks, wood varnishes, decorative coatings for metal cans and food cartons, adhesives a...展開 Photocure ITX-P is a yellow crystalline powder of 2-Isopropylthioxanthone with a melting point between 70-76℃. This product is an efficient photoinitiator for printing inks, wood varnishes, decorative coatings for metal cans and food cartons, adhesives and pressure transfer sheets. 收起 | |
| Photocure PDO | Eutec Chemical Co., Ltd. | Photocure PDO is a white crystalline powder of 1-Phenyl-1,2-propanedione-2-(O-ethoxycarboxy)oxime. This product is an efficient photoinitiator for photosensitive polymers which are used in dark system of UV curing inks. | |
| Photocure TAZ-110 | Eutec Chemical Co., Ltd. | Photocure TAZ-110 is a yellow powder of 2,4-Bis(trichloromethyl)-6-(p-methoxystyryl)-s-triazine with a melting point between 190-193°C. This product is an efficient photoacid generator for UV-curable systems such as ink, adhesives and photo resists for di...展開 Photocure TAZ-110 is a yellow powder of 2,4-Bis(trichloromethyl)-6-(p-methoxystyryl)-s-triazine with a melting point between 190-193°C. This product is an efficient photoacid generator for UV-curable systems such as ink, adhesives and photo resists for display materials. 收起 |
