| A-2468 Aluminium Paste | Silberline Manufacturing Co., Inc. | A-2468 is a coarse non-leafing aluminum pigment with cornflake geometry. | |
| A-6205 Aluminium Paste | Silberline Manufacturing Co., Inc. | A-6205 is a standard grade; class B, medium sized, leafing aluminum pigment carried in C-66 exempt mineral spirits. | |
| A-6571FG Aluminum Paste | Silberline Manufacturing Co., Inc. | A-6571FG is a standard polished grade; class A, fine particle size, leafing aluminum pigment carried in C-66 exempt mineral spirits. A-6571FG is suitable for use in aerosol paints and maintenance coatings. | |
| AQUA PASTE® 055-C33 | Silberline Manufacturing Co., Inc. | AQUA PASTE® 055-C33 is a passivated aluminum paste comprised of a coarse particle size, non-leafing lenticular flake that provides excellent brightness. | |
| AQUASIL® BP 3500 Inhibited Aluminum Pigment | Silberline Manufacturing Co., Inc. | AQUASIL® BP 3500 is a medium particle size, bright, non-leafing inhibited aluminum pigment for waterborne general industrial coatings. This is an economical grade with cornflake geometry and wide particle size distribution range. This grade can be used wi...展開 AQUASIL® BP 3500 is a medium particle size, bright, non-leafing inhibited aluminum pigment for waterborne general industrial coatings. This is an economical grade with cornflake geometry and wide particle size distribution range. This grade can be used with chromatic pigments to produce colored metallic effects. 收起 | |
| Aquavex® AD 010 Aluminium Pigment | Silberline Manufacturing Co., Inc. | Aquavex® AD 010 contains super fine particle size, high adhesion, aluminium flake pigment in a low dusting, easily handled form. It combines in one product the easy dispersibility of WD grades and the gassing resistance of Aqua Paste®. It is essentially f...展開 Aquavex® AD 010 contains super fine particle size, high adhesion, aluminium flake pigment in a low dusting, easily handled form. It combines in one product the easy dispersibility of WD grades and the gassing resistance of Aqua Paste®. It is essentially free of hydrocarbon solvents, but contains a passivating agent to minimise the release of hydrogen gas that can occur when aluminium flake is in contact with water. Surfactants contribute to both the low dusting property and easy dispersibility in water. Suggested applications are water-based inks and some water-based industrial paints. 收起 | |
| Aquavex® AD 015 Aluminium Pigment | Silberline Manufacturing Co., Inc. | Aquavex® AD 015 contains medium-fine particle size, high adhesion, aluminium flake pigment in a low dusting, easily handled form. It combines in one product the easy dispersibility of WD grades and the gassing resistance of Aqua Paste®. It is essentially ...展開 Aquavex® AD 015 contains medium-fine particle size, high adhesion, aluminium flake pigment in a low dusting, easily handled form. It combines in one product the easy dispersibility of WD grades and the gassing resistance of Aqua Paste®. It is essentially free of hydrocarbon solvents, but contains a passivating agent to minimise the release of hydrogen gas that can occur when aluminium flake is in contact with water. Surfactants contribute to both the low dusting property and easy dispersibility in water. Suggested applications are water-based inks and some water-based industrial paints. 收起 | |
| AQUAVEX® L Premier 021 Aluminium Pigment | Silberline Manufacturing Co., Inc. | AQUAVEX® L Premier 021 contains a medium particle size, extremely reflective aluminum flake pigment in a low dusting, easily handled form. It combines in one product the easy dispersibility of WD grades and the gassing resistance of AQUAPASTE®. It is esse...展開 AQUAVEX® L Premier 021 contains a medium particle size, extremely reflective aluminum flake pigment in a low dusting, easily handled form. It combines in one product the easy dispersibility of WD grades and the gassing resistance of AQUAPASTE®. It is essentially free of hydrocarbon solvents, but contains a passivating agent to minimize the release of hydrogen gas that can occur when aluminum flake is in contact with water. Surfactants contribute to both the low dusting property and easy dispersibility in water. Suggested applications are water-based inks and some water-based industrial paints. 收起 | |
| AQUAVEX® NL 010 Aluminium Pigment | Silberline Manufacturing Co., Inc. | AQUAVEX® NL 010 contains super fine particle size, but very bright aluminum flake pigment in a low dusting, easily handled form. It combines in one product, the easy dispersibility of WD grades and the gassing resistance of AQUA PASTE®. It is essentially ...展開 AQUAVEX® NL 010 contains super fine particle size, but very bright aluminum flake pigment in a low dusting, easily handled form. It combines in one product, the easy dispersibility of WD grades and the gassing resistance of AQUA PASTE®. It is essentially free of hydrocarbon solvents, but contains a passivating agent to minimize the release of hydrogen gas that can occur when aluminum flake is in contact with water. Surfactants contribute to both the low dusting property and easy dispersibility in water. Suggested applications are water-based inks and some water-based industrial paints. 收起 | |
| AQUAVEX® NL 013 Aluminium Pigment | Silberline Manufacturing Co., Inc. | AQUAVEX® NL 013 contains fine particle size, but very bright aluminum flake pigment in a low dusting, easily handled form. It combines in one product the easy dispersibility of WD grades and the gassing resistance of AQUA PASTE®. It is essentially free of...展開 AQUAVEX® NL 013 contains fine particle size, but very bright aluminum flake pigment in a low dusting, easily handled form. It combines in one product the easy dispersibility of WD grades and the gassing resistance of AQUA PASTE®. It is essentially free of hydrocarbon solvents, but contains a passivating agent to minimize the release of hydrogen gas that can occur when aluminum flake is in contact with water. Surfactants contribute to both the low dusting property and easy dispersibility in water. Suggested applications are water-based inks and some water-based industrial paints. 收起 | |
| AQUAVEX® NL 028 Aluminium Pigment | Silberline Manufacturing Co., Inc. | AQUAVEX® NL 028 contains coarse particle size, bright and sparkling aluminum flake pigment in a low dusting, easily handled form. It combines in one product, the easy dispersibility of WD grades and the gassing resistance of AQUA PASTE®. It is essentially...展開 AQUAVEX® NL 028 contains coarse particle size, bright and sparkling aluminum flake pigment in a low dusting, easily handled form. It combines in one product, the easy dispersibility of WD grades and the gassing resistance of AQUA PASTE®. It is essentially free of hydrocarbon solvents, but contains a passivating agent to minimize the release of hydrogen gas that can occur when aluminum flake is in contact with water. Surfactants contribute to both the low dusting property and easy dispersibility in water. Suggested applications are water-based inks and some water-based industrial paints. 收起 | |
| C Glass Flake GF007/C | Glassflake Ltd | C Glass Flake GF007/C is a corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of Av. 5 +/- 2 microns. The manufacturing process utilized by this flake differs from the normal spun-glass method, resulting i...展開 C Glass Flake GF007/C is a corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of Av. 5 +/- 2 microns. The manufacturing process utilized by this flake differs from the normal spun-glass method, resulting in a wider thickness specification. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| C Glass Flake GF750/C | Glassflake Ltd | C Glass Flake GF750/C is a corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of Av. 5 +/- 2 microns. The manufacturing process utilized by this flake differs from the normal spun-glass method, resulting i...展開 C Glass Flake GF750/C is a corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of Av. 5 +/- 2 microns. The manufacturing process utilized by this flake differs from the normal spun-glass method, resulting in a wider thickness specification. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| C Glass Flake GF750MC | Glassflake Ltd | C Glass Flake GF750MC is a corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of Av. 5 +/-2 microns. The manufacturing process utilized by this flake differs from the normal spun-glass method, resulting in...展開 C Glass Flake GF750MC is a corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of Av. 5 +/-2 microns. The manufacturing process utilized by this flake differs from the normal spun-glass method, resulting in a wider thickness specification. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF001 | Glassflake Ltd | ECR Glass Flake GF001 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.0 - 1.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties a...展開 ECR Glass Flake GF001 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.0 - 1.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF002 | Glassflake Ltd | ECR Glass Flake GF002 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.3 - 2.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties a...展開 ECR Glass Flake GF002 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.3 - 2.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF003 | Glassflake Ltd | ECR Glass Flake GF003 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 2.3 - 3.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties a...展開 ECR Glass Flake GF003 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 2.3 - 3.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF005 | Glassflake Ltd | ECR Glass Flake GF005 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 3.5 - 5.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties ...展開 ECR Glass Flake GF005 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 3.5 - 5.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF007 | Glassflake Ltd | ECR Glass Flake GF007 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 5.5 - 9.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties a...展開 ECR Glass Flake GF007 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 5.5 - 9.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF100M (Milled) | Glassflake Ltd | ECR Glass Flake GF100M (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.0 - 1.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pr...展開 ECR Glass Flake GF100M (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.0 - 1.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF100M (Unmilled) | Glassflake Ltd | ECR Glass Flake GF100 (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.0 - 1.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier p...展開 ECR Glass Flake GF100 (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.0 - 1.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF100nm (Unmilled) | Glassflake Ltd | ECR Glass Flake GF100nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.100nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pr...展開 ECR Glass Flake GF100nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.100nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF100nmM (Milled) | Glassflake Ltd | ECR Glass Flake GF100nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.100nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pro...展開 ECR Glass Flake GF100nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.100nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF350nm (Unmilled) | Glassflake Ltd | ECR Glass Flake GF350nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.350nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pr...展開 ECR Glass Flake GF350nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.350nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF350nmM (Milled) | Glassflake Ltd | ECR Glass Flake GF350nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.350nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pro...展開 ECR Glass Flake GF350nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.350nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF500M (Milled) | Glassflake Ltd | ECR Glass Flake GF500M (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 3.5 - 5.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pr...展開 ECR Glass Flake GF500M (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 3.5 - 5.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF500M (Unmilled) | Glassflake Ltd | ECR Glass Flake GF500 (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 3.5 - 5.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier p...展開 ECR Glass Flake GF500 (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 3.5 - 5.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF500nm (Unmilled) | Glassflake Ltd | ECR Glass Flake GF500nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.500nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pr...展開 ECR Glass Flake GF500nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.500nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF500nmM (Milled) | Glassflake Ltd | ECR Glass Flake GF500nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.500nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pro...展開 ECR Glass Flake GF500nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.500nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF750M (Milled) | Glassflake Ltd | ECR Glass Flake GF750 (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 5.5 - 9.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pro...展開 ECR Glass Flake GF750 (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 5.5 - 9.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF750M (Unmilled) | Glassflake Ltd | ECR Glass Flake GF750 (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 5.5 - 9.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier p...展開 ECR Glass Flake GF750 (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 5.5 - 9.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF750nm (Unmilled) | Glassflake Ltd | ECR Glass Flake GF750nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.750nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pr...展開 ECR Glass Flake GF750nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.750nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF750nmM (Milled) | Glassflake Ltd | ECR Glass Flake GF750nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.750nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pro...展開 ECR Glass Flake GF750nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.750nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ETERNABRITE® 255-PA | Silberline Manufacturing Co., Inc. | ETERNABRITE® 255-PA is an aluminum pigment paste with a small, corn-flake particle size. This product is designed to provide very strong metallic effects in liquid flexographic and gravure ink systems. It is not recommended for use in aqueous inks unless ...展開 ETERNABRITE® 255-PA is an aluminum pigment paste with a small, corn-flake particle size. This product is designed to provide very strong metallic effects in liquid flexographic and gravure ink systems. It is not recommended for use in aqueous inks unless an evaluation of stability in the final ink formulation produces desired results. ETERNABRITE® 255-PA is leafing and 74% non-volatile by weight. This grade is produced as a pigment paste carried in isopropyl alcohol but is not treated to inhibit an aluminum-water gassing reaction. 收起 | |
| ETERNABRITE® 651-1 | Silberline Manufacturing Co., Inc. | ETERNABRITE® 651-1 is a class A aluminum pigment paste with leafing values of 80% and above. This product is used to provide leafing stability, sag resistance, and a metallic appearance in aerosol paints, maintenance coatings, wheel coatings and offset in...展開 ETERNABRITE® 651-1 is a class A aluminum pigment paste with leafing values of 80% and above. This product is used to provide leafing stability, sag resistance, and a metallic appearance in aerosol paints, maintenance coatings, wheel coatings and offset inks. ETERNABRITE® 651-1 has a mesh grade of 400 and is 42% non-volatile by volume. 收起 | |
| ETERNABRITE® 651-7 | Silberline Manufacturing Co., Inc. | ETERNABRITE® 651-7 is a bright, aluminum pigment paste with a small, corn-flake particle size. This product is designed to provide good coverage and a metallic color/luster in paste inks and offset printing applications. ETERNABRITE® 651-7 is leafing and ...展開 ETERNABRITE® 651-7 is a bright, aluminum pigment paste with a small, corn-flake particle size. This product is designed to provide good coverage and a metallic color/luster in paste inks and offset printing applications. ETERNABRITE® 651-7 is leafing and 72% non-volatile by weight. 收起 | |
| ETERNABRITE® 651-PA | Silberline Manufacturing Co., Inc. | ETERNABRITE® 651-PA is a bright aluminum pigment paste with a small, corn-flake particle size. This product is designed to provide good coverage and metallic effects in liquid flexographic and gravure ink systems. It is not recommended for use in aqueous ...展開 ETERNABRITE® 651-PA is a bright aluminum pigment paste with a small, corn-flake particle size. This product is designed to provide good coverage and metallic effects in liquid flexographic and gravure ink systems. It is not recommended for use in aqueous inks unless an evaluation of stability in the final ink formulation produces desired results. ETERNABRITE® 651-PA is leafing and 70% non-volatile by weight. 收起 | |
| ETERNABRITE® Premier 351-PA | Silberline Manufacturing Co., Inc. | ETERNABRITE® Premier 351-PA is a bright aluminum pigment paste with a coarse particle size. This product is designed to provide strong metallic effects in solvent, liquid flexographic and gravure inks. It is not recommended for use in aqueous inks unless ...展開 ETERNABRITE® Premier 351-PA is a bright aluminum pigment paste with a coarse particle size. This product is designed to provide strong metallic effects in solvent, liquid flexographic and gravure inks. It is not recommended for use in aqueous inks unless an evaluation of stability in the final ink formulation produces desired results. ETERNABRITE® Premier 351-PA is leafing and 77% non-volatile by weight. 收起 | |
| Extra Fine GH Aluminum Paste | Silberline Manufacturing Co., Inc. | Extra Fine GH is suitable for use in aerosol, anti-corrosive and maintenance coatings in which high aromatic solvent content is desired. This product is particularly suitable in applications requiring a small particle size standard leafing aluminum pigmen...展開 Extra Fine GH is suitable for use in aerosol, anti-corrosive and maintenance coatings in which high aromatic solvent content is desired. This product is particularly suitable in applications requiring a small particle size standard leafing aluminum pigment with good brightness. 收起 | |
| Hanos ASP-100F | Hanwha Chemical Corporation | Hanos ASP-100F is a single-walled carbon nano tube produced by conventional arc-discharge process using Fe-based metal catalysts. It has good electric conductivity and heat conductivity with a high crystallinity and aspect ratio giving it excellent mechan...展開 Hanos ASP-100F is a single-walled carbon nano tube produced by conventional arc-discharge process using Fe-based metal catalysts. It has good electric conductivity and heat conductivity with a high crystallinity and aspect ratio giving it excellent mechanical strength. This product is well suited for use in conductive transparent electrodes, conductive nano ink, conductive heating films, nano device, nano-bio material and chemical sensors. 收起 | |
| Hanos AST-100F | Hanwha Chemical Corporation | Hanos AST-100F is a single-walled carbon nano tube produced by conventional arc-discharge process using Fe-based metal catalysts. It has good electric conductivity and heat conductivity with a high crystallinity and aspect ratio giving it excellent mechan...展開 Hanos AST-100F is a single-walled carbon nano tube produced by conventional arc-discharge process using Fe-based metal catalysts. It has good electric conductivity and heat conductivity with a high crystallinity and aspect ratio giving it excellent mechanical strength. This product is well suited for use in conductive transparent electrodes, conductive nano ink, conductive heating films, nano device, nano-bio material and chemical sensors. 收起 | |
| Hanos MWCNT CM-150 | Hanwha Chemical Corporation | Hanos MWCNT CM-150 is a multi-walled carbon nano tube synthesized by catalytic CVD process. It has about 90 wt.% purity without any purification. By virtue of improvements in the synthetic process, it shows enhanced conductivity and dispersibility suitab...展開 Hanos MWCNT CM-150 is a multi-walled carbon nano tube synthesized by catalytic CVD process. It has about 90 wt.% purity without any purification. By virtue of improvements in the synthetic process, it shows enhanced conductivity and dispersibility suitable for conductive composite application. CM-150 Composite material is well suited for the production of ESD, EMI shielding, reinforced material, heat exchangers, etc. 收起 | |
| Hanos MWCNT CM-250 | Hanwha Chemical Corporation | Hanos MWCNT CM-250 is a multi-walled carbon nano tube synthesized by catalytic CVD process. It has about 95 wt.% purity without any purification. By virtue of improvements in the synthetic process, it shows enhanced conductivity and dispersibility suitab...展開 Hanos MWCNT CM-250 is a multi-walled carbon nano tube synthesized by catalytic CVD process. It has about 95 wt.% purity without any purification. By virtue of improvements in the synthetic process, it shows enhanced conductivity and dispersibility suitable for conductive composite application. CM-250 Composite material is well suited for the production of for inks & paste, ESD, EMI Shielding, reinforced materials, heat exchanger, etc. 收起 | |
| Hanos MWCNT CM-280 | Hanwha Chemical Corporation | Hanos MWCNT CM-280 is a multi-walled carbon nano tube synthesized by catalytic CVD process. It has about 95 wt.% purity without any purification. By virtue of improvements in the synthetic process, it shows enhanced conductivity and dispersibility suitab...展開 Hanos MWCNT CM-280 is a multi-walled carbon nano tube synthesized by catalytic CVD process. It has about 95 wt.% purity without any purification. By virtue of improvements in the synthetic process, it shows enhanced conductivity and dispersibility suitable for conductive composite application. CM-280 Composite material is well suited for the production of for inks & paste, ESD, EMI Shielding, reinforced materials, heat exchanger, etc. 收起 | |
| Hanos MWCNT CM-350 | Hanwha Chemical Corporation | Hanos MWCNT CM-350 is a multi-walled carbon nano tube synthesized by catalytic CVD process. It has about 90 wt.% purity without any purification. By virtue of improvements in the synthetic process, it shows enhanced conductivity and dispersibility suitab...展開 Hanos MWCNT CM-350 is a multi-walled carbon nano tube synthesized by catalytic CVD process. It has about 90 wt.% purity without any purification. By virtue of improvements in the synthetic process, it shows enhanced conductivity and dispersibility suitable for conductive composite application. CM-350 Composite material is well suited for the production of for inks & paste, ESD, EMI Shielding, reinforced materials, heat exchanger, etc. 收起 | |
| Hanos PS Compound / Sheet | Hanwha Chemical Corporation | Hanos PS Compound / Sheet is a conductive product for Electrostatic Dissipative(ESD) or antistatic purpose with special CNT layers. It can be used in various industrial areas to prevent electrical damages of target products. It is well suited for use as a...展開 Hanos PS Compound / Sheet is a conductive product for Electrostatic Dissipative(ESD) or antistatic purpose with special CNT layers. It can be used in various industrial areas to prevent electrical damages of target products. It is well suited for use as a filler in the production of sheets or as a black pigment in inks and paints. 收起 | |
| Hanos PS Ink | Hanwha Chemical Corporation | Hanos PS Ink is a PP pellet coating ink that has excellent surface resistance on film. Eco-friendly, it can impart electrostatic resistance, thermal and added strength to many products. It is well suited for use as a filler in various industrial applicati...展開 Hanos PS Ink is a PP pellet coating ink that has excellent surface resistance on film. Eco-friendly, it can impart electrostatic resistance, thermal and added strength to many products. It is well suited for use as a filler in various industrial applications such as conductive films or inks for chip trays. 收起 | |
| Hanos SW01 | Hanwha Chemical Corporation | Hanos SW01 is a water-based CNT ink that has excellent surface resistance on film. Eco-friendly, it can impart electrostatic resistance, thermal and added strength to many products. It is well suited for use as a filler in various industrial applications ...展開 Hanos SW01 is a water-based CNT ink that has excellent surface resistance on film. Eco-friendly, it can impart electrostatic resistance, thermal and added strength to many products. It is well suited for use as a filler in various industrial applications such as conductive films or inks for chip trays. 收起 | |
| Hanos TW01 | Hanwha Chemical Corporation | Hanos TW01 is a water-based CNT ink that has excellent surface resistance on film. Eco-friendly, it can impart electrostatic resistance, thermal and added strength to many products. It is well suited for use as a filler in various industrial applications ...展開 Hanos TW01 is a water-based CNT ink that has excellent surface resistance on film. Eco-friendly, it can impart electrostatic resistance, thermal and added strength to many products. It is well suited for use as a filler in various industrial applications such as conductive films or inks for chip trays. 收起 | |
| Hanwha 2-EH (2-Ethyl-1-Hexanol) | Hanwha Chemical Corporation | Hanwha 2-EH is an colorless, transparent liquid made of 2-Ethyl-1-Hexanol. It is primarily used as the main ingredient in the production of certain types of plasticizers. It is well suited for use in making solvents, stabilizers and acrylates as well. | |
| Hanwha CP-430 | Hanwha Chemical Corporation | Hanwha CP-430 is a Vinyl Chloride-Vinyl Acetate Copolymer with outstanding solvent solubility, adhesion, transparency and liquidity. CP-430 is well suited for use in the production of Gravure inks, adhesives and paints. | |
| Hanwha CP-450 | Hanwha Chemical Corporation | Hanwha CP-450 is a Vinyl Chloride-Vinyl Acetate Copolymer with outstanding solvent solubility, adhesion, transparency and liquidity. CP-450 is well suited for use in the production of inks, adhesives and paints. | |
| Hanwha CP-710 | Hanwha Chemical Corporation | Hanwha CP-710 is a Vinyl Chloride-Vinyl Acetate Copolymer with outstanding solvent solubility, adhesion, transparency and liquidity. CP-710 is well suited for use in the production of inks, adhesives and paints. | |
| Hanwha DIDP (Diisodecyl Phthalate) | Hanwha Chemical Corporation | Hanwha DIDP is a transparent plasticizer made of Diisononyl Phthalate with excellent viscosity and outstanding electrical insulation. It is well suited for use in the production of films, sheets, leathers, wire coatings, wall papers and flooring materials...展開 Hanwha DIDP is a transparent plasticizer made of Diisononyl Phthalate with excellent viscosity and outstanding electrical insulation. It is well suited for use in the production of films, sheets, leathers, wire coatings, wall papers and flooring materials where ever cold, light and chemicals resistance is required. 收起 | |
| Hanwha I-BuOH (2-Methylpropan-1-Ol) | Hanwha Chemical Corporation | Hanwha I-BuOH is an colorless, transparent liquid made of 2-Methylpropan-1-Ol. It is primarily used as the main ingredient in the production of certain types of plasticizers. It is well suited for use in making solvents and amino resins as well. | |
| Hanwha MA (High-purity Maleic Anhydride) | Hanwha Chemical Corporation | Hanwha MA is a pure white flaky solid at room temperature that when heated becomes a colorless transparent liquid. Made of a High-purity Maleic Anhydride, it is primarily used in the production of resins. It can also be used in the production of FRP paint...展開 Hanwha MA is a pure white flaky solid at room temperature that when heated becomes a colorless transparent liquid. Made of a High-purity Maleic Anhydride, it is primarily used in the production of resins. It can also be used in the production of FRP paints, dyes and pigments. 收起 | |
| Hanwha N-BuOH (N-Butyl Alcohol) | Hanwha Chemical Corporation | Hanwha N-BuOH is an colorless, transparent liquid made of N-Butyl Alcohol. It is primarily used as the main ingredient in the production of certain types of plasticizers. It is well suited for use in making solvents, stabilizers and acrylates as well. | |
| Hanwha PA (High-purity Phthalic Anhydride) | Hanwha Chemical Corporation | Hanwha PA is a pure white flaky solid at room temperature that when heated becomes a colorless transparent liquid. Made of High-purity Phthalic Anhydride, it is primarily used in the production of phthalate plasticizers. It can also be used in the product...展開 Hanwha PA is a pure white flaky solid at room temperature that when heated becomes a colorless transparent liquid. Made of High-purity Phthalic Anhydride, it is primarily used in the production of phthalate plasticizers. It can also be used in the production of FRP paints and spandex. 收起 | |
| Hanwha TP-400M | Hanwha Chemical Corporation | Hanwha TP-400M is a PVC resin made from a terpolymer with outstanding adhesion to metals. It is well suited for use in the production of metal coatings, paints and aluminum printing inks. | |
| HCCFlex SP-390 | Hanwha Chemical Corporation | HCCFlex SP-390 is a Non-phthalate plasticizer made of Dioctyl Terephthalate (DOTP) which is non-carcinogenic and contains no environmental hormones. It is well suited for use in the production of films, sheets, leathers, flooring materials, wall papers a...展開 HCCFlex SP-390 is a Non-phthalate plasticizer made of Dioctyl Terephthalate (DOTP) which is non-carcinogenic and contains no environmental hormones. It is well suited for use in the production of films, sheets, leathers, flooring materials, wall papers and wire coatings. 收起 | |
| L-1015 Aluminum Paste | Silberline Manufacturing Co., Inc. | L-1015 is a standard grade, class “C”, coarse leafing aluminum pigment carried in regular mineral spirits. | |
| L-10545WD Aluminum Pigment | Silberline Manufacturing Co., Inc. | L-10545WD is an aluminum pigment paste based on a small particle size aluminum flake. The aluminum pigment flake is carried in a mixture of mineral spirits and diethylene glycol. L-10545WD contains an emulsifier to aid in the dispersion of the aluminum pi...展開 L-10545WD is an aluminum pigment paste based on a small particle size aluminum flake. The aluminum pigment flake is carried in a mixture of mineral spirits and diethylene glycol. L-10545WD contains an emulsifier to aid in the dispersion of the aluminum pigment flake in concrete mixtures and aqueous coatings systems. Although compatible with a variety of aqueous systems, L-10545WD is not chemically passivated to resist reaction with water. L-10545WD should be tested in each aqueous formulation to determine its reactivity. 收起 | |
| L-11085 Aluminum Paste | Silberline Manufacturing Co., Inc. | L-10545WD is a non-leafing aluminum paste. | |
| L-12683 | Silberline Manufacturing Co., Inc. | L-12683 is a bright, aluminum flake pigment paste that is carried in isopropyl acetate. This product is designed to provide high opacity and strong metallic effects in liquid flexographic and gravure ink systems. L-12683 is non-leafing and dispersible in ...展開 L-12683 is a bright, aluminum flake pigment paste that is carried in isopropyl acetate. This product is designed to provide high opacity and strong metallic effects in liquid flexographic and gravure ink systems. L-12683 is non-leafing and dispersible in all common organic solvents except aliphatic hydrocarbons. 收起 | |
| L-406AR Aluminum Paste | Silberline Manufacturing Co., Inc. | L-406AR is a medium particle size, bright, non-leafing aluminum pigment with a narrow particle size distribution. It provides exceptional brightness and is high purity. | |
| LA Glass Flake GF001LA | Glassflake Ltd | LA Glass Flake GF001LA is a Low Alkali Glassflake, or LAG, which has been formulated specifically for use as a pigment substrate, giving the finished product unique effects. Glass flakes, or borosilicates as they are often referred to, are a unique substr...展開 LA Glass Flake GF001LA is a Low Alkali Glassflake, or LAG, which has been formulated specifically for use as a pigment substrate, giving the finished product unique effects. Glass flakes, or borosilicates as they are often referred to, are a unique substrate which, unlike natural micas and synthetic micas, have a completely planar and smooth surface. They are also completely transparent, giving rise to effect pigments coated with metal oxides that display high brightness, good color purity, and high chroma. Presently glass flake pigments are used in both cosmetic and industrial applications including automotive coatings. 收起 | |
| LA Glass Flake GF100LA | Glassflake Ltd | LA Glass Flake GF100LA is a Low Alkali Glassflake, or LAG, which has been formulated specifically for use as a pigment substrate, giving the finished product unique effects. Glass flakes, or borosilicates as they are often referred to, are a unique substr...展開 LA Glass Flake GF100LA is a Low Alkali Glassflake, or LAG, which has been formulated specifically for use as a pigment substrate, giving the finished product unique effects. Glass flakes, or borosilicates as they are often referred to, are a unique substrate which, unlike natural micas and synthetic micas, have a completely planar and smooth surface. They are also completely transparent, giving rise to effect pigments coated with metal oxides that display high brightness, good color purity, and high chroma. Presently glass flake pigments are used in both cosmetic and industrial applications including automotive coatings. 收起 | |
| LA Glass Flake GF100MLA | Glassflake Ltd | LA Glass Flake GF100MLA is a Low Alkali Glassflake, or LAG, which has been formulated specifically for use as a pigment substrate, giving the finished product unique effects. Glass flakes, or borosilicates as they are often referred to, are a unique subst...展開 LA Glass Flake GF100MLA is a Low Alkali Glassflake, or LAG, which has been formulated specifically for use as a pigment substrate, giving the finished product unique effects. Glass flakes, or borosilicates as they are often referred to, are a unique substrate which, unlike natural micas and synthetic micas, have a completely planar and smooth surface. They are also completely transparent, giving rise to effect pigments coated with metal oxides that display high brightness, good color purity, and high chroma. Presently glass flake pigments are used in both cosmetic and industrial applications including automotive coatings. 收起 | |
| Lansford 243 Aluminum Paste | Silberline Manufacturing Co., Inc. | Lansford 243 is a fine particle size, non-leafing aluminum pigment with good opacity for solvent -based maintenance coatings and general industrial coatings. This is a very economical grade with cornflake geometry and wide particle size distribution range...展開 Lansford 243 is a fine particle size, non-leafing aluminum pigment with good opacity for solvent -based maintenance coatings and general industrial coatings. This is a very economical grade with cornflake geometry and wide particle size distribution range. This grade is not recommended for use with chromatic pigments and is typically used to create a muted masstone appearance with good opacity and cost. 收起 | |
| Lansford 243GH Aluminum Paste | Silberline Manufacturing Co., Inc. | Lansford 243GH is a fine particle size, non-leafing aluminum pigment carried in high aromatic solvent with good opacity for solvent -based maintenance coatings and general industrial coatings. This is a very economical grade with cornflake geometry and wi...展開 Lansford 243GH is a fine particle size, non-leafing aluminum pigment carried in high aromatic solvent with good opacity for solvent -based maintenance coatings and general industrial coatings. This is a very economical grade with cornflake geometry and wide particle size distribution range. This grade is not recommended for use with chromatic pigments and is typically used to create a muted masstone appearance with good opacity and cost. 收起 | |
| LE-12773 | Silberline Manufacturing Co., Inc. | LE-12773 is an organically surface treated aluminum pigment with a fine, corn-flake particle size. This product is designed to provide bright face color, hiding power and reduced explosion risk in printing inks, automotive coatings, and powder coatings. L...展開 LE-12773 is an organically surface treated aluminum pigment with a fine, corn-flake particle size. This product is designed to provide bright face color, hiding power and reduced explosion risk in printing inks, automotive coatings, and powder coatings. LE-12773 is non-leafing and can impart improved chemical and environmental resistance properties in final coatings. 收起 | |
| LE-12774 | Silberline Manufacturing Co., Inc. | LE-12774 is an organically surface treated aluminum pigment with a fine, round-flake particle size. This product is designed to provide bright face color and hiding power in printing inks, automotive coatings, and powder coatings. LE-12774 is non-leafing ...展開 LE-12774 is an organically surface treated aluminum pigment with a fine, round-flake particle size. This product is designed to provide bright face color and hiding power in printing inks, automotive coatings, and powder coatings. LE-12774 is non-leafing and can impart improved chemical and environmental resistance properties in final coatings. 收起 | |
| LT-1094 Aluminium Pigment | Silberline Manufacturing Co., Inc. | LT-1094 is a fine particle size aluminum pigment produced in pellet form to reduce the potential for generating airborne pigment particles and to improve ease of handling. This is an economical grade and can be used to create a gray masstone metallic appe...展開 LT-1094 is a fine particle size aluminum pigment produced in pellet form to reduce the potential for generating airborne pigment particles and to improve ease of handling. This is an economical grade and can be used to create a gray masstone metallic appearance with good opacity at low cost. This grade is not recommended for use with chromatic pigments as it will not produce clean color effects. Although this grade is based on a leafing aluminum pigment, it will not exhibit leafing characteristics in most plastic applications. LT-1094 is suitable for use in both plastics and powder coating applications. 收起 | |
| LT-12605 Aluminum Pigment | Silberline Manufacturing Co., Inc. | LT-12605 is a medium particle size, bright, Tufflake® Premier aluminum produced in pellet form to reduce the potential for generating airborne particles and to improve ease of handling. | |
| LX-12860 Aluminum Paste | Silberline Manufacturing Co., Inc. | LX-12860 is a fine, bright aluminum flake product suitable for use in cross-link foam applications that require aluminum flake pigment and flame retardant carrier. | |
| Moonshine® AgFlake 100-100 (GFEAGF-1100) | Glassflake Ltd | Moonshine® AgFlake 100-100 are thin borosilicate glass flakes encapsulated in silver. They may be used for functional purposes as a conductive filler. They have an average particle size diameter of 100 μm. High conductivity can be achieved at low loadings...展開 Moonshine® AgFlake 100-100 are thin borosilicate glass flakes encapsulated in silver. They may be used for functional purposes as a conductive filler. They have an average particle size diameter of 100 μm. High conductivity can be achieved at low loadings. Agflakes are lightweight in contrast to equivalent pure metal fillers. They may be used as both a functional and a decorative pigment. Presently glass flake pigments are used in both cosmetic and industrial applications including automotive coatings. 收起 | |
| Moonshine® AgFlake 100-20 (GFEAGF-1020) | Glassflake Ltd | Moonshine® AgFlake 100-20 are thin borosilicate glass flakes encapsulated in silver. They may be used for functional purposes as a conductive filler. They have an average particle size diameter of 20 μm. High conductivity can be achieved at low loadings. ...展開 Moonshine® AgFlake 100-20 are thin borosilicate glass flakes encapsulated in silver. They may be used for functional purposes as a conductive filler. They have an average particle size diameter of 20 μm. High conductivity can be achieved at low loadings. Agflakes are lightweight in contrast to equivalent pure metal fillers. They may be used as both a functional and a decorative pigment. Presently glass flake pigments are used in both cosmetic and industrial applications including automotive coatings. 收起 | |
| Moonshine® AgFlake 100-40 (GFEAGF-1040) | Glassflake Ltd | Moonshine® AgFlake 100-40 are thin borosilicate glass flakes encapsulated in silver. They may be used for functional purposes as a conductive filler. They have an average particle size diameter of 40 μm. High conductivity can be achieved at low loadings. ...展開 Moonshine® AgFlake 100-40 are thin borosilicate glass flakes encapsulated in silver. They may be used for functional purposes as a conductive filler. They have an average particle size diameter of 40 μm. High conductivity can be achieved at low loadings. Agflakes are lightweight in contrast to equivalent pure metal fillers. They may be used as both a functional and a decorative pigment. Presently glass flake pigments are used in both cosmetic and industrial applications including automotive coatings. 收起 | |
| Moonshine® AgFlake 100-60 (GFEAGF-1060) | Glassflake Ltd | Moonshine® AgFlake 100-60 are thin borosilicate glass flakes encapsulated in silver. They may be used for functional purposes as a conductive filler. They have an average particle size diameter of 60 μm. High conductivity can be achieved at low loadings. ...展開 Moonshine® AgFlake 100-60 are thin borosilicate glass flakes encapsulated in silver. They may be used for functional purposes as a conductive filler. They have an average particle size diameter of 60 μm. High conductivity can be achieved at low loadings. Agflakes are lightweight in contrast to equivalent pure metal fillers. They may be used as both a functional and a decorative pigment. Presently glass flake pigments are used in both cosmetic and industrial applications including automotive coatings. 收起 | |
| Moonshine® AgFlake 100-80 (GFEAGF-1080) | Glassflake Ltd | Moonshine® AgFlake 100-80 are thin borosilicate glass flakes encapsulated in silver. They may be used for functional purposes as a conductive filler. They have an average particle size diameter of 80 μm. High conductivity can be achieved at low loadings. ...展開 Moonshine® AgFlake 100-80 are thin borosilicate glass flakes encapsulated in silver. They may be used for functional purposes as a conductive filler. They have an average particle size diameter of 80 μm. High conductivity can be achieved at low loadings. Agflakes are lightweight in contrast to equivalent pure metal fillers. They may be used as both a functional and a decorative pigment. Presently glass flake pigments are used in both cosmetic and industrial applications including automotive coatings. 收起 | |
| Moonshine® AuFlake 500-90 (GFEAUF-5090) | Glassflake Ltd | Moonshine® AuFlake 500-90 are thin borosilicate glass flakes encapsulated in silver, gold, and tin oxide. They may be used for functional purposes as a conductive filler. They have an average particle size diameter of 90 μm. High conductivity can be achie...展開 Moonshine® AuFlake 500-90 are thin borosilicate glass flakes encapsulated in silver, gold, and tin oxide. They may be used for functional purposes as a conductive filler. They have an average particle size diameter of 90 μm. High conductivity can be achieved at low loadings. Agflakes are lightweight in contrast to equivalent pure metal fillers. They may be used as both a functional and a decorative pigment. Presently glass flake pigments are used in both cosmetic and industrial applications including automotive coatings. 收起 | |
| Moonshine® Blue Shimmer (GFEB) | Glassflake Ltd | Moonshine® Blue Shimmer (GFEB) are high specification glass flakes with an average thickness of 1.2 microns. They are coated with high refractive index metal oxides, resulting in unique pigments that display strong interference colors combined with high t...展開 Moonshine® Blue Shimmer (GFEB) are high specification glass flakes with an average thickness of 1.2 microns. They are coated with high refractive index metal oxides, resulting in unique pigments that display strong interference colors combined with high transparency and extraordinary gloss. They allow for the creation of unique designs and styles, even at low loadings. The Effect series may be used in both cosmetic and industrial applications. 收起 | |
| Moonshine® Blue Sparkle (GFEBS) | Glassflake Ltd | Moonshine® Blue Sparkle (GFEBS) are high specification glass flakes with an average thickness of 1.2 microns. They are coated with high refractive index metal oxides, resulting in unique pigments that display strong interference colors combined with high ...展開 Moonshine® Blue Sparkle (GFEBS) are high specification glass flakes with an average thickness of 1.2 microns. They are coated with high refractive index metal oxides, resulting in unique pigments that display strong interference colors combined with high transparency and extraordinary gloss. They allow for the creation of unique designs and styles, even at low loadings. The Effect series may be used in both cosmetic and industrial applications. 收起 | |
| Moonshine® Bronze Ultra Shimmer (GFEBRSU) | Glassflake Ltd | Moonshine® Bronze Ultra Shimmer (GFEBRSU) are high specification glass flakes with an average thickness of 1.2 microns. They are coated with high refractive index metal oxides, resulting in unique pigments that display strong interference colors combined ...展開 Moonshine® Bronze Ultra Shimmer (GFEBRSU) are high specification glass flakes with an average thickness of 1.2 microns. They are coated with high refractive index metal oxides, resulting in unique pigments that display strong interference colors combined with high transparency and extraordinary gloss. They allow for the creation of unique designs and styles, even at low loadings. The Effect series may be used in both cosmetic and industrial applications. 收起 | |
| Moonshine® Colour Travel Blue-Green-Gold Shimmer (GFE-BGG) | Glassflake Ltd | Moonshine® Colour Travel Blue-Green-Gold Shimmer (GFE-BGG) are thin borosilicate glass flakes with an average thickness of 1.2 microns. They are coated with layers of high refractive index metal oxides and silica, resulting in unique pigments that display...展開 Moonshine® Colour Travel Blue-Green-Gold Shimmer (GFE-BGG) are thin borosilicate glass flakes with an average thickness of 1.2 microns. They are coated with layers of high refractive index metal oxides and silica, resulting in unique pigments that display strong color flop effects combined with high transparency and extraordinary gloss. They allow for the creation of unique designs and styles, even at low loadings. The Effect series may be used in both cosmetic and industrial applications. 收起 | |
| Moonshine® Colour Travel Blue-Green-Gold Sparkle (GFE-BGGS) | Glassflake Ltd | Moonshine® Colour Travel Blue-Green-Gold Sparkle (GFE-BGGS) are thin borosilicate glass flakes with an average thickness of 1.2 microns. They coated with layers of high refractive index metal oxides and silica, resulting in unique pigments that display st...展開 Moonshine® Colour Travel Blue-Green-Gold Sparkle (GFE-BGGS) are thin borosilicate glass flakes with an average thickness of 1.2 microns. They coated with layers of high refractive index metal oxides and silica, resulting in unique pigments that display strong color flop effects combined with high transparency and extraordinary gloss. They allow for the creation of unique designs and styles, even at low loadings. The Effect series may be used in both cosmetic and industrial applications. 收起 | |
| Moonshine® Colour Travel Blue-Green-Gold Ultra Sparkle (GFE-BGGUS) | Glassflake Ltd | Moonshine® Colour Travel Blue-Green-Gold Ultra Sparkle (GFE-BGGUS) are thin borosilicate glass flakes with an average thickness of 1.2 microns. They are coated with layers of high refractive index metal oxides and silica, resulting in unique pigments that...展開 Moonshine® Colour Travel Blue-Green-Gold Ultra Sparkle (GFE-BGGUS) are thin borosilicate glass flakes with an average thickness of 1.2 microns. They are coated with layers of high refractive index metal oxides and silica, resulting in unique pigments that display strong color flop effects combined with high transparency and extraordinary gloss. They allow for the creation of unique designs and styles, even at low loadings. The Effect series may be used in both cosmetic and industrial applications. 收起 | |
| Moonshine® Colour Travel Gold-Red-Violet Shimmer (GFE-GRV) | Glassflake Ltd | Moonshine® Colour Travel Gold-Red-Violet Shimmer (GFE-GRV) are thin borosilicate glass flakes with an average thickness of 1.2 microns. They are coated with layers of high refractive index metal oxides and silica, resulting in unique pigments that display...展開 Moonshine® Colour Travel Gold-Red-Violet Shimmer (GFE-GRV) are thin borosilicate glass flakes with an average thickness of 1.2 microns. They are coated with layers of high refractive index metal oxides and silica, resulting in unique pigments that display strong color flop effects combined with high transparency and extraordinary gloss. They allow for the creation of unique designs and styles, even at low loadings. The Effect series may be used in both cosmetic and industrial applications. 收起 | |
| Moonshine® Colour Travel Gold-Red-Violet Sparkle (GFE-GRVS) | Glassflake Ltd | Moonshine® Colour Travel Gold-Red-Violet Sparkle (GFE-GRVS) are thin borosilicate glass flakes with an average thickness of 1.2 microns. They are coated with layers of high refractive index metal oxides and silica, resulting in unique pigments that displa...展開 Moonshine® Colour Travel Gold-Red-Violet Sparkle (GFE-GRVS) are thin borosilicate glass flakes with an average thickness of 1.2 microns. They are coated with layers of high refractive index metal oxides and silica, resulting in unique pigments that display strong color flop effects combined with high transparency and extraordinary gloss. They allow for the creation of unique designs and styles, even at low loadings. The Effect series may be used in both cosmetic and industrial applications. 收起 | |
| Moonshine® Colour Travel Gold-Red-Violet Ultra Sparkle (GFE-GRVUS) | Glassflake Ltd | Moonshine® Colour Travel Gold-Red-Violet Ultra Sparkle (GFE-GRVUS) are thin borosilicate glass flakes with an average thickness of 1.2 microns. They are coated with layers of high refractive index metal oxides and silica, resulting in unique pigments that...展開 Moonshine® Colour Travel Gold-Red-Violet Ultra Sparkle (GFE-GRVUS) are thin borosilicate glass flakes with an average thickness of 1.2 microns. They are coated with layers of high refractive index metal oxides and silica, resulting in unique pigments that display strong color flop effects combined with high transparency and extraordinary gloss. They allow for the creation of unique designs and styles, even at low loadings. The Effect series may be used in both cosmetic and industrial applications. 收起 | |
| Moonshine® Colour Travel Red-Violet-Blue Shimmer (GFE-RVB) | Glassflake Ltd | Moonshine® Colour Travel Red-Violet-Blue Shimmer (GFE-RVB) are thin borosilicate glass flakes with an average thickness of 1.2 microns. They are coated with layers of high refractive index metal oxides and silica, resulting in unique pigments that display...展開 Moonshine® Colour Travel Red-Violet-Blue Shimmer (GFE-RVB) are thin borosilicate glass flakes with an average thickness of 1.2 microns. They are coated with layers of high refractive index metal oxides and silica, resulting in unique pigments that display strong color flop effects combined with high transparency and extraordinary gloss. They allow for the creation of unique designs and styles, even at low loadings. The Effect series may be used in both cosmetic and industrial applications. 收起 | |
| Moonshine® Colour Travel Red-Violet-Blue Sparkle (GFE-RVBS) | Glassflake Ltd | Moonshine® Colour Travel Red-Violet-Blue Sparkle (GFE-RVBS) are thin borosilicate glass flakes with an average thickness of 1.2 microns. They are coated with layers of high refractive index metal oxides and silica, resulting in unique pigments that displa...展開 Moonshine® Colour Travel Red-Violet-Blue Sparkle (GFE-RVBS) are thin borosilicate glass flakes with an average thickness of 1.2 microns. They are coated with layers of high refractive index metal oxides and silica, resulting in unique pigments that display strong color flop effects combined with high transparency and extraordinary gloss. They allow for the creation of unique designs and styles, even at low loadings. The Effect series may be used in both cosmetic and industrial applications. 收起 | |
| Moonshine® Colour Travel Red-Violet-Blue Ultra Sparkle (GFE-RVBUS) | Glassflake Ltd | Moonshine® Colour Travel Red-Violet-Blue Ultra Sparkle (GFE-RVBUS) are thin borosilicate glass flakes with an average thickness of 1.2 microns. They are coated with layers of high refractive index metal oxides and silica, resulting in unique pigments that...展開 Moonshine® Colour Travel Red-Violet-Blue Ultra Sparkle (GFE-RVBUS) are thin borosilicate glass flakes with an average thickness of 1.2 microns. They are coated with layers of high refractive index metal oxides and silica, resulting in unique pigments that display strong color flop effects combined with high transparency and extraordinary gloss. They allow for the creation of unique designs and styles, even at low loadings. The Effect series may be used in both cosmetic and industrial applications. 收起 | |
| Moonshine® Colour Travel Violet-Blue-Green Shimmer (GFE-VBG) | Glassflake Ltd | Moonshine® Colour Travel Violet-Blue-Green Shimmer (GFE-VBG) are thin borosilicate glass flakes with an average thickness of 1.2 microns. They are coated with layers of high refractive index metal oxides and silica, resulting in unique pigments that displ...展開 Moonshine® Colour Travel Violet-Blue-Green Shimmer (GFE-VBG) are thin borosilicate glass flakes with an average thickness of 1.2 microns. They are coated with layers of high refractive index metal oxides and silica, resulting in unique pigments that display strong color flop effects combined with high transparency and extraordinary gloss. They allow for the creation of unique designs and styles, even at low loadings. The Effect series may be used in both cosmetic and industrial applications. 收起 | |
| Moonshine® Colour Travel Violet-Blue-Green Sparkle (GFE-VBGS) | Glassflake Ltd | Moonshine® Colour Travel Violet-Blue-Green Sparkle (GFE-VBGS) are thin borosilicate glass flakes with an average thickness of 1.2 microns. They are coated with layers of high refractive index metal oxides and silica, resulting in unique pigments that disp...展開 Moonshine® Colour Travel Violet-Blue-Green Sparkle (GFE-VBGS) are thin borosilicate glass flakes with an average thickness of 1.2 microns. They are coated with layers of high refractive index metal oxides and silica, resulting in unique pigments that display strong color flop effects combined with high transparency and extraordinary gloss. They allow for the creation of unique designs and styles, even at low loadings. The Effect series may be used in both cosmetic and industrial applications. 收起 | |
| Moonshine® Colour Travel Violet-Blue-Green Ultra Sparkle (GFE-VBGUS) | Glassflake Ltd | Moonshine® Colour Travel Violet-Blue-Green Ultra Sparkle (GFE-VBGUS) are thin borosilicate glass flakes with an average thickness of 1.2 microns. They are coated with layers of high refractive index metal oxides and silica, resulting in unique pigments th...展開 Moonshine® Colour Travel Violet-Blue-Green Ultra Sparkle (GFE-VBGUS) are thin borosilicate glass flakes with an average thickness of 1.2 microns. They are coated with layers of high refractive index metal oxides and silica, resulting in unique pigments that display strong color flop effects combined with high transparency and extraordinary gloss. They allow for the creation of unique designs and styles, even at low loadings. The Effect series may be used in both cosmetic and industrial applications. 收起 | |
| Moonshine® Copper Ultra Shimmer (GFECOSU) | Glassflake Ltd | Moonshine® Copper Ultra Shimmer (GFECOSU) are high specification glass flakes with an average thickness of 1.2 microns. They are coated with high refractive index metal oxides resulting in unique pigments that display strong interference colors combined w...展開 Moonshine® Copper Ultra Shimmer (GFECOSU) are high specification glass flakes with an average thickness of 1.2 microns. They are coated with high refractive index metal oxides resulting in unique pigments that display strong interference colors combined with high transparency and extraordinary gloss. They allow for the creation of unique designs and styles, even at low loadings. The Effect series may be used in both cosmetic and industrial applications. 收起 | |
| Moonshine® Gold Shimmer (GFEG) | Glassflake Ltd | Moonshine® Gold Shimmer (GFEG) are high specification glass flakes with an average thickness of 1.2 microns. They are coated with high refractive index metal oxides resulting in unique pigments that display strong interference colors combined with high tr...展開 Moonshine® Gold Shimmer (GFEG) are high specification glass flakes with an average thickness of 1.2 microns. They are coated with high refractive index metal oxides resulting in unique pigments that display strong interference colors combined with high transparency and extraordinary gloss. They allow for the creation of unique designs and styles, even at low loadings. The Effect series may be used in both cosmetic and industrial applications. 收起 | |
| Moonshine® Gold Sparkle (GFEGS) | Glassflake Ltd | Moonshine® Gold Sparkle (GFEGS) are high specification glass flakes with an average thickness of 1.2 microns. They are coated with high refractive index metal oxides resulting in unique pigments that display strong interference colors combined with high t...展開 Moonshine® Gold Sparkle (GFEGS) are high specification glass flakes with an average thickness of 1.2 microns. They are coated with high refractive index metal oxides resulting in unique pigments that display strong interference colors combined with high transparency and extraordinary gloss. They allow for the creation of unique designs and styles, even at low loadings. The Effect series may be used in both cosmetic and industrial applications. 收起 | |
| Moonshine® Green Shimmer (GFEGR) | Glassflake Ltd | Moonshine® Green Shimmer (GFEGR) are high specification glass flakes with an average thickness of 1.2 microns. They are coated with high refractive index metal oxides resulting in unique pigments that display strong interference colors combined with high ...展開 Moonshine® Green Shimmer (GFEGR) are high specification glass flakes with an average thickness of 1.2 microns. They are coated with high refractive index metal oxides resulting in unique pigments that display strong interference colors combined with high transparency and extraordinary gloss. They allow for the creation of unique designs and styles, even at low loadings. The Effect series may be used in both cosmetic and industrial applications. 收起 |
