| A-2468 Aluminium Paste | Silberline Manufacturing Co., Inc. | A-2468 is a coarse non-leafing aluminum pigment with cornflake geometry. | |
| A-6205 Aluminium Paste | Silberline Manufacturing Co., Inc. | A-6205 is a standard grade; class B, medium sized, leafing aluminum pigment carried in C-66 exempt mineral spirits. | |
| A-6571FG Aluminum Paste | Silberline Manufacturing Co., Inc. | A-6571FG is a standard polished grade; class A, fine particle size, leafing aluminum pigment carried in C-66 exempt mineral spirits. A-6571FG is suitable for use in aerosol paints and maintenance coatings. | |
| ACCULIN® 1000 (2071A) | The International Group, Inc. (IGI Wax) | ACCULIN® 1000 is a hard, high melting point polyethylene. | |
| ACCULIN® 1500 (2057A) | The International Group, Inc. (IGI Wax) | ACCULIN® 1500 is an extremely pure, inert, narrow melt point product that exhibits very specific expansion behavior. | |
| ACCULIN® 1500 (2073A) | The International Group, Inc. (IGI Wax) | ACCULIN® 1500 is a hard, low melting point polyethylene. | |
| ACCULIN® 2000 (2074A) | The International Group, Inc. (IGI Wax) | ACCULIN® 2000 is a hard, high melting point polyethylene. | |
| ACCULIN® 500 (2056A) | The International Group, Inc. (IGI Wax) | ACCULIN® 500 is a hard, low melting point polyethylene. | |
| ACCULIN® 600 (2059A) | The International Group, Inc. (IGI Wax) | ACCULIN® 600 is a hard, low melting point polyethylene. | |
| ACCULIN® 655 (2061A) | The International Group, Inc. (IGI Wax) | ACCULIN® 655 is a hard, low melting point polyethylene. | |
| ACCULIN® 725 (2063A) | The International Group, Inc. (IGI Wax) | ACCULIN® 725 is a hard, low melting point polyethylene. | |
| AQUA PASTE® 055-C33 | Silberline Manufacturing Co., Inc. | AQUA PASTE® 055-C33 is a passivated aluminum paste comprised of a coarse particle size, non-leafing lenticular flake that provides excellent brightness. | |
| Aquaban® 9001A | The International Group, Inc. (IGI Wax) | Aquaban® 9001A is a concentrated general purpose water-based treatment for paper and corrugated board. It imparts a high level of water repellence. This product should be diluted with water before use, depending upon protection required. Typical dilution ...展開 Aquaban® 9001A is a concentrated general purpose water-based treatment for paper and corrugated board. It imparts a high level of water repellence. This product should be diluted with water before use, depending upon protection required. Typical dilution is 1:1 with water. 收起 | |
| Aquaban® 9009A | The International Group, Inc. (IGI Wax) | Aquaban® 9009A is a water-based treatment for paper and corrugated board. It imparts a high level of water repellence. | |
| Aquaban® 9010A | The International Group, Inc. (IGI Wax) | Aquaban® 9010A is a concentrated general purpose water-based treatment for paper and corrugated board. It imparts a high level of water repellence. For corrugated application, the product should be diluted with water before use, depending upon protection ...展開 Aquaban® 9010A is a concentrated general purpose water-based treatment for paper and corrugated board. It imparts a high level of water repellence. For corrugated application, the product should be diluted with water before use, depending upon protection required. Typical dilution is 1:1 with water. For general purpose application other than corrugated, the product can be used without dilution. 收起 | |
| AQUASIL® BP 3500 Inhibited Aluminum Pigment | Silberline Manufacturing Co., Inc. | AQUASIL® BP 3500 is a medium particle size, bright, non-leafing inhibited aluminum pigment for waterborne general industrial coatings. This is an economical grade with cornflake geometry and wide particle size distribution range. This grade can be used wi...展開 AQUASIL® BP 3500 is a medium particle size, bright, non-leafing inhibited aluminum pigment for waterborne general industrial coatings. This is an economical grade with cornflake geometry and wide particle size distribution range. This grade can be used with chromatic pigments to produce colored metallic effects. 收起 | |
| Aquavex® AD 010 Aluminium Pigment | Silberline Manufacturing Co., Inc. | Aquavex® AD 010 contains super fine particle size, high adhesion, aluminium flake pigment in a low dusting, easily handled form. It combines in one product the easy dispersibility of WD grades and the gassing resistance of Aqua Paste®. It is essentially f...展開 Aquavex® AD 010 contains super fine particle size, high adhesion, aluminium flake pigment in a low dusting, easily handled form. It combines in one product the easy dispersibility of WD grades and the gassing resistance of Aqua Paste®. It is essentially free of hydrocarbon solvents, but contains a passivating agent to minimise the release of hydrogen gas that can occur when aluminium flake is in contact with water. Surfactants contribute to both the low dusting property and easy dispersibility in water. Suggested applications are water-based inks and some water-based industrial paints. 收起 | |
| Aquavex® AD 015 Aluminium Pigment | Silberline Manufacturing Co., Inc. | Aquavex® AD 015 contains medium-fine particle size, high adhesion, aluminium flake pigment in a low dusting, easily handled form. It combines in one product the easy dispersibility of WD grades and the gassing resistance of Aqua Paste®. It is essentially ...展開 Aquavex® AD 015 contains medium-fine particle size, high adhesion, aluminium flake pigment in a low dusting, easily handled form. It combines in one product the easy dispersibility of WD grades and the gassing resistance of Aqua Paste®. It is essentially free of hydrocarbon solvents, but contains a passivating agent to minimise the release of hydrogen gas that can occur when aluminium flake is in contact with water. Surfactants contribute to both the low dusting property and easy dispersibility in water. Suggested applications are water-based inks and some water-based industrial paints. 收起 | |
| AQUAVEX® L Premier 021 Aluminium Pigment | Silberline Manufacturing Co., Inc. | AQUAVEX® L Premier 021 contains a medium particle size, extremely reflective aluminum flake pigment in a low dusting, easily handled form. It combines in one product the easy dispersibility of WD grades and the gassing resistance of AQUAPASTE®. It is esse...展開 AQUAVEX® L Premier 021 contains a medium particle size, extremely reflective aluminum flake pigment in a low dusting, easily handled form. It combines in one product the easy dispersibility of WD grades and the gassing resistance of AQUAPASTE®. It is essentially free of hydrocarbon solvents, but contains a passivating agent to minimize the release of hydrogen gas that can occur when aluminum flake is in contact with water. Surfactants contribute to both the low dusting property and easy dispersibility in water. Suggested applications are water-based inks and some water-based industrial paints. 收起 | |
| AQUAVEX® NL 010 Aluminium Pigment | Silberline Manufacturing Co., Inc. | AQUAVEX® NL 010 contains super fine particle size, but very bright aluminum flake pigment in a low dusting, easily handled form. It combines in one product, the easy dispersibility of WD grades and the gassing resistance of AQUA PASTE®. It is essentially ...展開 AQUAVEX® NL 010 contains super fine particle size, but very bright aluminum flake pigment in a low dusting, easily handled form. It combines in one product, the easy dispersibility of WD grades and the gassing resistance of AQUA PASTE®. It is essentially free of hydrocarbon solvents, but contains a passivating agent to minimize the release of hydrogen gas that can occur when aluminum flake is in contact with water. Surfactants contribute to both the low dusting property and easy dispersibility in water. Suggested applications are water-based inks and some water-based industrial paints. 收起 | |
| AQUAVEX® NL 013 Aluminium Pigment | Silberline Manufacturing Co., Inc. | AQUAVEX® NL 013 contains fine particle size, but very bright aluminum flake pigment in a low dusting, easily handled form. It combines in one product the easy dispersibility of WD grades and the gassing resistance of AQUA PASTE®. It is essentially free of...展開 AQUAVEX® NL 013 contains fine particle size, but very bright aluminum flake pigment in a low dusting, easily handled form. It combines in one product the easy dispersibility of WD grades and the gassing resistance of AQUA PASTE®. It is essentially free of hydrocarbon solvents, but contains a passivating agent to minimize the release of hydrogen gas that can occur when aluminum flake is in contact with water. Surfactants contribute to both the low dusting property and easy dispersibility in water. Suggested applications are water-based inks and some water-based industrial paints. 收起 | |
| AQUAVEX® NL 028 Aluminium Pigment | Silberline Manufacturing Co., Inc. | AQUAVEX® NL 028 contains coarse particle size, bright and sparkling aluminum flake pigment in a low dusting, easily handled form. It combines in one product, the easy dispersibility of WD grades and the gassing resistance of AQUA PASTE®. It is essentially...展開 AQUAVEX® NL 028 contains coarse particle size, bright and sparkling aluminum flake pigment in a low dusting, easily handled form. It combines in one product, the easy dispersibility of WD grades and the gassing resistance of AQUA PASTE®. It is essentially free of hydrocarbon solvents, but contains a passivating agent to minimize the release of hydrogen gas that can occur when aluminum flake is in contact with water. Surfactants contribute to both the low dusting property and easy dispersibility in water. Suggested applications are water-based inks and some water-based industrial paints. 收起 | |
| ASTORLITE® J50 (4636A) | The International Group, Inc. (IGI Wax) | ASTORLITE® J50 is a soft, white, opaque wax specially designed for jar / container candles. Its cohesive strength and low shrinkage allow it to adhere to the container. Jar / container candles can be made with a single filling with no top-off necessary. | |
| Bake-Guard 9156A | The International Group, Inc. (IGI Wax) | Bake-Guard 9156A is a high performance water-based coating for corrugated board and paper substrates where exceptional grease and water resistance are required. Other unique features of this product are its high angle of slide and ease of printability. | |
| Barrier-Grip 9471A | The International Group, Inc. (IGI Wax) | Barrier-Grip 9471A is a water-based product that provides a high performance barrier against water and grease when applied to a paper based substrate. Coated surface also exhibits exceptionally high slide angle. | |
| Barrier-Grip 9471B | The International Group, Inc. (IGI Wax) | Barrier-Grip 9471B is a water-based product that provides a high performance barrier against water and grease when applied to a paper based substrate. Coated surface also exhibits exceptionally high slide angle. | |
| Barrier-Grip 9472B | The International Group, Inc. (IGI Wax) | Barrier-Grip 9472B is a water-based coating designed as an economical pre-coat for application onto kraft liners or other paper substrates. It seals the substrate and provides a uniform surface onto which functional coatings may be applied, optimising the...展開 Barrier-Grip 9472B is a water-based coating designed as an economical pre-coat for application onto kraft liners or other paper substrates. It seals the substrate and provides a uniform surface onto which functional coatings may be applied, optimising the performance of the functional coatings. 收起 | |
| Barrier-Grip R5701H | The International Group, Inc. (IGI Wax) | Barrier-Grip R5701H is a water-based product that provides a high performance barrier against water and grease when applied to a paper based substrate. Coated surface also exhibits exceptionally high slide angle. | |
| Barrier-Grip R6709A | The International Group, Inc. (IGI Wax) | Barrier-Grip R6709A is a water-based product that provides a high performance barrier against water and grease when applied to a paper based substrate. Coated surface also exhibits exceptionally high slide angle. | |
| Barrier-Seal R6728A | The International Group, Inc. (IGI Wax) | Barrier-Seal R6728A is a water-based coating designed for SBS cup stock and other paper based substrates. It can be used for any packaging application that requires excellent water resistance, oil resistance and heat seal. | |
| C Glass Flake GF007/C | Glassflake Ltd | C Glass Flake GF007/C is a corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of Av. 5 +/- 2 microns. The manufacturing process utilized by this flake differs from the normal spun-glass method, resulting i...展開 C Glass Flake GF007/C is a corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of Av. 5 +/- 2 microns. The manufacturing process utilized by this flake differs from the normal spun-glass method, resulting in a wider thickness specification. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| C Glass Flake GF750/C | Glassflake Ltd | C Glass Flake GF750/C is a corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of Av. 5 +/- 2 microns. The manufacturing process utilized by this flake differs from the normal spun-glass method, resulting i...展開 C Glass Flake GF750/C is a corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of Av. 5 +/- 2 microns. The manufacturing process utilized by this flake differs from the normal spun-glass method, resulting in a wider thickness specification. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| C Glass Flake GF750MC | Glassflake Ltd | C Glass Flake GF750MC is a corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of Av. 5 +/-2 microns. The manufacturing process utilized by this flake differs from the normal spun-glass method, resulting in...展開 C Glass Flake GF750MC is a corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of Av. 5 +/-2 microns. The manufacturing process utilized by this flake differs from the normal spun-glass method, resulting in a wider thickness specification. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF001 | Glassflake Ltd | ECR Glass Flake GF001 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.0 - 1.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties a...展開 ECR Glass Flake GF001 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.0 - 1.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF002 | Glassflake Ltd | ECR Glass Flake GF002 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.3 - 2.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties a...展開 ECR Glass Flake GF002 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.3 - 2.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF003 | Glassflake Ltd | ECR Glass Flake GF003 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 2.3 - 3.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties a...展開 ECR Glass Flake GF003 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 2.3 - 3.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF005 | Glassflake Ltd | ECR Glass Flake GF005 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 3.5 - 5.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties ...展開 ECR Glass Flake GF005 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 3.5 - 5.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF007 | Glassflake Ltd | ECR Glass Flake GF007 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 5.5 - 9.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties a...展開 ECR Glass Flake GF007 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 5.5 - 9.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF100M (Milled) | Glassflake Ltd | ECR Glass Flake GF100M (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.0 - 1.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pr...展開 ECR Glass Flake GF100M (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.0 - 1.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF100M (Unmilled) | Glassflake Ltd | ECR Glass Flake GF100 (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.0 - 1.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier p...展開 ECR Glass Flake GF100 (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.0 - 1.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF100nm (Unmilled) | Glassflake Ltd | ECR Glass Flake GF100nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.100nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pr...展開 ECR Glass Flake GF100nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.100nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF100nmM (Milled) | Glassflake Ltd | ECR Glass Flake GF100nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.100nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pro...展開 ECR Glass Flake GF100nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.100nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF350nm (Unmilled) | Glassflake Ltd | ECR Glass Flake GF350nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.350nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pr...展開 ECR Glass Flake GF350nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.350nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF350nmM (Milled) | Glassflake Ltd | ECR Glass Flake GF350nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.350nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pro...展開 ECR Glass Flake GF350nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.350nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF500M (Milled) | Glassflake Ltd | ECR Glass Flake GF500M (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 3.5 - 5.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pr...展開 ECR Glass Flake GF500M (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 3.5 - 5.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF500M (Unmilled) | Glassflake Ltd | ECR Glass Flake GF500 (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 3.5 - 5.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier p...展開 ECR Glass Flake GF500 (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 3.5 - 5.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF500nm (Unmilled) | Glassflake Ltd | ECR Glass Flake GF500nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.500nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pr...展開 ECR Glass Flake GF500nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.500nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF500nmM (Milled) | Glassflake Ltd | ECR Glass Flake GF500nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.500nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pro...展開 ECR Glass Flake GF500nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.500nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF750M (Milled) | Glassflake Ltd | ECR Glass Flake GF750 (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 5.5 - 9.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pro...展開 ECR Glass Flake GF750 (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 5.5 - 9.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF750M (Unmilled) | Glassflake Ltd | ECR Glass Flake GF750 (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 5.5 - 9.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier p...展開 ECR Glass Flake GF750 (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 5.5 - 9.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF750nm (Unmilled) | Glassflake Ltd | ECR Glass Flake GF750nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.750nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pr...展開 ECR Glass Flake GF750nm (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.750nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ECR Glass Flake GF750nmM (Milled) | Glassflake Ltd | ECR Glass Flake GF750nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.750nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pro...展開 ECR Glass Flake GF750nmM (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of ca.750nm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. 收起 | |
| ETERNABRITE® 255-PA | Silberline Manufacturing Co., Inc. | ETERNABRITE® 255-PA is an aluminum pigment paste with a small, corn-flake particle size. This product is designed to provide very strong metallic effects in liquid flexographic and gravure ink systems. It is not recommended for use in aqueous inks unless ...展開 ETERNABRITE® 255-PA is an aluminum pigment paste with a small, corn-flake particle size. This product is designed to provide very strong metallic effects in liquid flexographic and gravure ink systems. It is not recommended for use in aqueous inks unless an evaluation of stability in the final ink formulation produces desired results. ETERNABRITE® 255-PA is leafing and 74% non-volatile by weight. This grade is produced as a pigment paste carried in isopropyl alcohol but is not treated to inhibit an aluminum-water gassing reaction. 收起 | |
| ETERNABRITE® 651-1 | Silberline Manufacturing Co., Inc. | ETERNABRITE® 651-1 is a class A aluminum pigment paste with leafing values of 80% and above. This product is used to provide leafing stability, sag resistance, and a metallic appearance in aerosol paints, maintenance coatings, wheel coatings and offset in...展開 ETERNABRITE® 651-1 is a class A aluminum pigment paste with leafing values of 80% and above. This product is used to provide leafing stability, sag resistance, and a metallic appearance in aerosol paints, maintenance coatings, wheel coatings and offset inks. ETERNABRITE® 651-1 has a mesh grade of 400 and is 42% non-volatile by volume. 收起 | |
| ETERNABRITE® 651-7 | Silberline Manufacturing Co., Inc. | ETERNABRITE® 651-7 is a bright, aluminum pigment paste with a small, corn-flake particle size. This product is designed to provide good coverage and a metallic color/luster in paste inks and offset printing applications. ETERNABRITE® 651-7 is leafing and ...展開 ETERNABRITE® 651-7 is a bright, aluminum pigment paste with a small, corn-flake particle size. This product is designed to provide good coverage and a metallic color/luster in paste inks and offset printing applications. ETERNABRITE® 651-7 is leafing and 72% non-volatile by weight. 收起 | |
| ETERNABRITE® 651-PA | Silberline Manufacturing Co., Inc. | ETERNABRITE® 651-PA is a bright aluminum pigment paste with a small, corn-flake particle size. This product is designed to provide good coverage and metallic effects in liquid flexographic and gravure ink systems. It is not recommended for use in aqueous ...展開 ETERNABRITE® 651-PA is a bright aluminum pigment paste with a small, corn-flake particle size. This product is designed to provide good coverage and metallic effects in liquid flexographic and gravure ink systems. It is not recommended for use in aqueous inks unless an evaluation of stability in the final ink formulation produces desired results. ETERNABRITE® 651-PA is leafing and 70% non-volatile by weight. 收起 | |
| ETERNABRITE® Premier 351-PA | Silberline Manufacturing Co., Inc. | ETERNABRITE® Premier 351-PA is a bright aluminum pigment paste with a coarse particle size. This product is designed to provide strong metallic effects in solvent, liquid flexographic and gravure inks. It is not recommended for use in aqueous inks unless ...展開 ETERNABRITE® Premier 351-PA is a bright aluminum pigment paste with a coarse particle size. This product is designed to provide strong metallic effects in solvent, liquid flexographic and gravure inks. It is not recommended for use in aqueous inks unless an evaluation of stability in the final ink formulation produces desired results. ETERNABRITE® Premier 351-PA is leafing and 77% non-volatile by weight. 收起 | |
| EVACOTE® 7089A | The International Group, Inc. (IGI Wax) | EVACOTE® 7089A is a specialty formulation of petroleum waxes and polymers suitable in consistency to be utilized as a sealant and coating for fertilizer applications. | |
| EVACOTE® 7292C | The International Group, Inc. (IGI Wax) | EVACOTE® 7292C is a premium multi-component formulation having good barrier properties against both water and moisture vapor. Its low viscosity might assist in achieving better machinability for application. | |
| Extra Fine GH Aluminum Paste | Silberline Manufacturing Co., Inc. | Extra Fine GH is suitable for use in aerosol, anti-corrosive and maintenance coatings in which high aromatic solvent content is desired. This product is particularly suitable in applications requiring a small particle size standard leafing aluminum pigmen...展開 Extra Fine GH is suitable for use in aerosol, anti-corrosive and maintenance coatings in which high aromatic solvent content is desired. This product is particularly suitable in applications requiring a small particle size standard leafing aluminum pigment with good brightness. 收起 | |
| IGI® 0431G | The International Group, Inc. (IGI Wax) | IGI® 0431G is a crude paraffin slack wax with relatively high oil content and melting point. | |
| IGI® 1230A | The International Group, Inc. (IGI Wax) | IGI® 1230A is a fully refined paraffin wax. | |
| IGI® 1239A | The International Group, Inc. (IGI Wax) | IGI® 1239A is a fully refined wax with a mid-range melting point. | |
| IGI® 1250A | The International Group, Inc. (IGI Wax) | IGI® 1250A is a fully refined paraffin wax. | |
| IGI® 1260A | The International Group, Inc. (IGI Wax) | IGI® 1260A is a fully refined paraffin wax. | |
| IGI® 1297A | The International Group, Inc. (IGI Wax) | IGI® 1297A is a fully refined paraffin wax with excellent heat stability. | |
| IGI® 1303A | The International Group, Inc. (IGI Wax) | IGI® 1303A is a fully refined high-melt paraffin wax that is used in a variety of applications including: hot-melt adhesives, investment casting, rubber products and textiles. | |
| IGI® 2202A | The International Group, Inc. (IGI Wax) | IGI® 2202A is a semi-refined, low-melt, scale wax that is used in a variety of applications including; candles and chlorination. | |
| IGI® 2251A | The International Group, Inc. (IGI Wax) | IGI® 2251A is a flexible physiotherapy wax. IGI® 2251A is a low melting wax that is totally transparent (clear) at 125°F (52°C). | |
| IGI® 2281A | The International Group, Inc. (IGI Wax) | IGI® 2281A is a specially selected grade of white crude scale wax possessing good flexibility as well as high gloss on air cooling. IGI® 2281A is ideal for use in container candles or as a coating wax for vegetables. The storage life of vegetables such as...展開 IGI® 2281A is a specially selected grade of white crude scale wax possessing good flexibility as well as high gloss on air cooling. IGI® 2281A is ideal for use in container candles or as a coating wax for vegetables. The storage life of vegetables such as turnips is improved by prevention of loss of moisture, while appearance is enhanced for improved marketability. Because it maintains flexibility at refrigerated temperatures, chipping and cracking of the coating is minimized when compared to other waxes. 收起 | |
| IGI® 2288A | The International Group, Inc. (IGI Wax) | IGI® 2288A is a refined scale wax designed for heat therapy of arthritic and related ailments. It has a low melting point to avoid discomfort on application, and solidifies to form a soft, flexible coating which is easily peeled from the skin. As IGI® 228...展開 IGI® 2288A is a refined scale wax designed for heat therapy of arthritic and related ailments. It has a low melting point to avoid discomfort on application, and solidifies to form a soft, flexible coating which is easily peeled from the skin. As IGI® 2288A solidifies, it continues to release heat to the treated area. 收起 | |
| IGI® 2289A | The International Group, Inc. (IGI Wax) | IGI® 2289A is a crude scale paraffin wax derived from petroleum. | |
| IGI® 6006A | The International Group, Inc. (IGI Wax) | IGI® 6006A is a specialty wax formulation for “one pour” container candles. | |
| IGI® 6027A | The International Group, Inc. (IGI Wax) | IGI® 6027A is a specialty formulation for container candles. | |
| IGI® 6028A | The International Group, Inc. (IGI Wax) | IGI® 6028A is a specialty formulation of vegetable derived waxes and petroleum derived waxes suitable in consistency to be used for the manufacture of pillar, votive and other molded candles. | |
| IGI® 6046A | The International Group, Inc. (IGI Wax) | IGI® 6046A is a specialty formulation for use in container candles. | |
| L-1015 Aluminum Paste | Silberline Manufacturing Co., Inc. | L-1015 is a standard grade, class “C”, coarse leafing aluminum pigment carried in regular mineral spirits. | |
| L-10545WD Aluminum Pigment | Silberline Manufacturing Co., Inc. | L-10545WD is an aluminum pigment paste based on a small particle size aluminum flake. The aluminum pigment flake is carried in a mixture of mineral spirits and diethylene glycol. L-10545WD contains an emulsifier to aid in the dispersion of the aluminum pi...展開 L-10545WD is an aluminum pigment paste based on a small particle size aluminum flake. The aluminum pigment flake is carried in a mixture of mineral spirits and diethylene glycol. L-10545WD contains an emulsifier to aid in the dispersion of the aluminum pigment flake in concrete mixtures and aqueous coatings systems. Although compatible with a variety of aqueous systems, L-10545WD is not chemically passivated to resist reaction with water. L-10545WD should be tested in each aqueous formulation to determine its reactivity. 收起 | |
| L-11085 Aluminum Paste | Silberline Manufacturing Co., Inc. | L-10545WD is a non-leafing aluminum paste. | |
| L-12683 | Silberline Manufacturing Co., Inc. | L-12683 is a bright, aluminum flake pigment paste that is carried in isopropyl acetate. This product is designed to provide high opacity and strong metallic effects in liquid flexographic and gravure ink systems. L-12683 is non-leafing and dispersible in ...展開 L-12683 is a bright, aluminum flake pigment paste that is carried in isopropyl acetate. This product is designed to provide high opacity and strong metallic effects in liquid flexographic and gravure ink systems. L-12683 is non-leafing and dispersible in all common organic solvents except aliphatic hydrocarbons. 收起 | |
| L-406AR Aluminum Paste | Silberline Manufacturing Co., Inc. | L-406AR is a medium particle size, bright, non-leafing aluminum pigment with a narrow particle size distribution. It provides exceptional brightness and is high purity. | |
| LA Glass Flake GF001LA | Glassflake Ltd | LA Glass Flake GF001LA is a Low Alkali Glassflake, or LAG, which has been formulated specifically for use as a pigment substrate, giving the finished product unique effects. Glass flakes, or borosilicates as they are often referred to, are a unique substr...展開 LA Glass Flake GF001LA is a Low Alkali Glassflake, or LAG, which has been formulated specifically for use as a pigment substrate, giving the finished product unique effects. Glass flakes, or borosilicates as they are often referred to, are a unique substrate which, unlike natural micas and synthetic micas, have a completely planar and smooth surface. They are also completely transparent, giving rise to effect pigments coated with metal oxides that display high brightness, good color purity, and high chroma. Presently glass flake pigments are used in both cosmetic and industrial applications including automotive coatings. 收起 | |
| LA Glass Flake GF100LA | Glassflake Ltd | LA Glass Flake GF100LA is a Low Alkali Glassflake, or LAG, which has been formulated specifically for use as a pigment substrate, giving the finished product unique effects. Glass flakes, or borosilicates as they are often referred to, are a unique substr...展開 LA Glass Flake GF100LA is a Low Alkali Glassflake, or LAG, which has been formulated specifically for use as a pigment substrate, giving the finished product unique effects. Glass flakes, or borosilicates as they are often referred to, are a unique substrate which, unlike natural micas and synthetic micas, have a completely planar and smooth surface. They are also completely transparent, giving rise to effect pigments coated with metal oxides that display high brightness, good color purity, and high chroma. Presently glass flake pigments are used in both cosmetic and industrial applications including automotive coatings. 收起 | |
| LA Glass Flake GF100MLA | Glassflake Ltd | LA Glass Flake GF100MLA is a Low Alkali Glassflake, or LAG, which has been formulated specifically for use as a pigment substrate, giving the finished product unique effects. Glass flakes, or borosilicates as they are often referred to, are a unique subst...展開 LA Glass Flake GF100MLA is a Low Alkali Glassflake, or LAG, which has been formulated specifically for use as a pigment substrate, giving the finished product unique effects. Glass flakes, or borosilicates as they are often referred to, are a unique substrate which, unlike natural micas and synthetic micas, have a completely planar and smooth surface. They are also completely transparent, giving rise to effect pigments coated with metal oxides that display high brightness, good color purity, and high chroma. Presently glass flake pigments are used in both cosmetic and industrial applications including automotive coatings. 收起 | |
| Lansford 243 Aluminum Paste | Silberline Manufacturing Co., Inc. | Lansford 243 is a fine particle size, non-leafing aluminum pigment with good opacity for solvent -based maintenance coatings and general industrial coatings. This is a very economical grade with cornflake geometry and wide particle size distribution range...展開 Lansford 243 is a fine particle size, non-leafing aluminum pigment with good opacity for solvent -based maintenance coatings and general industrial coatings. This is a very economical grade with cornflake geometry and wide particle size distribution range. This grade is not recommended for use with chromatic pigments and is typically used to create a muted masstone appearance with good opacity and cost. 收起 | |
| Lansford 243GH Aluminum Paste | Silberline Manufacturing Co., Inc. | Lansford 243GH is a fine particle size, non-leafing aluminum pigment carried in high aromatic solvent with good opacity for solvent -based maintenance coatings and general industrial coatings. This is a very economical grade with cornflake geometry and wi...展開 Lansford 243GH is a fine particle size, non-leafing aluminum pigment carried in high aromatic solvent with good opacity for solvent -based maintenance coatings and general industrial coatings. This is a very economical grade with cornflake geometry and wide particle size distribution range. This grade is not recommended for use with chromatic pigments and is typically used to create a muted masstone appearance with good opacity and cost. 收起 | |
| LE-12773 | Silberline Manufacturing Co., Inc. | LE-12773 is an organically surface treated aluminum pigment with a fine, corn-flake particle size. This product is designed to provide bright face color, hiding power and reduced explosion risk in printing inks, automotive coatings, and powder coatings. L...展開 LE-12773 is an organically surface treated aluminum pigment with a fine, corn-flake particle size. This product is designed to provide bright face color, hiding power and reduced explosion risk in printing inks, automotive coatings, and powder coatings. LE-12773 is non-leafing and can impart improved chemical and environmental resistance properties in final coatings. 收起 | |
| LE-12774 | Silberline Manufacturing Co., Inc. | LE-12774 is an organically surface treated aluminum pigment with a fine, round-flake particle size. This product is designed to provide bright face color and hiding power in printing inks, automotive coatings, and powder coatings. LE-12774 is non-leafing ...展開 LE-12774 is an organically surface treated aluminum pigment with a fine, round-flake particle size. This product is designed to provide bright face color and hiding power in printing inks, automotive coatings, and powder coatings. LE-12774 is non-leafing and can impart improved chemical and environmental resistance properties in final coatings. 收起 | |
| LT-1094 Aluminium Pigment | Silberline Manufacturing Co., Inc. | LT-1094 is a fine particle size aluminum pigment produced in pellet form to reduce the potential for generating airborne pigment particles and to improve ease of handling. This is an economical grade and can be used to create a gray masstone metallic appe...展開 LT-1094 is a fine particle size aluminum pigment produced in pellet form to reduce the potential for generating airborne pigment particles and to improve ease of handling. This is an economical grade and can be used to create a gray masstone metallic appearance with good opacity at low cost. This grade is not recommended for use with chromatic pigments as it will not produce clean color effects. Although this grade is based on a leafing aluminum pigment, it will not exhibit leafing characteristics in most plastic applications. LT-1094 is suitable for use in both plastics and powder coating applications. 收起 | |
| LT-12605 Aluminum Pigment | Silberline Manufacturing Co., Inc. | LT-12605 is a medium particle size, bright, Tufflake® Premier aluminum produced in pellet form to reduce the potential for generating airborne particles and to improve ease of handling. | |
| LX-12860 Aluminum Paste | Silberline Manufacturing Co., Inc. | LX-12860 is a fine, bright aluminum flake product suitable for use in cross-link foam applications that require aluminum flake pigment and flame retardant carrier. | |
| MICROSERE® 5788A | The International Group, Inc. (IGI Wax) | MICROSERE® 5788A is a unique, low-melt microcrystalline wax that is used in a variety of applications including paper packaging and candles. | |
| MICROSERE® 5806A | The International Group, Inc. (IGI Wax) | MICROSERE® 5806A is a high-melt, amber colored microcrystalline that is used in a variety of applications. | |
| MICROSERE® 5871A | The International Group, Inc. (IGI Wax) | MICROSERE® 5871A is a light colored, high-melt, microcrystalline wax that is used in a variety of applications. | |
| MICROSERE® 5890A | The International Group, Inc. (IGI Wax) | MICROSERE® 5890A is a white, high-melt, microcrystalline wax that is used in a variety of applications. MICROSERE® 5890A complies with the requirements for “Microcrystalline Wax” set by the United States Pharmacopeia (USP) / National Formulary (NF). | |
| MICROSERE® 5896A | The International Group, Inc. (IGI Wax) | MICROSERE® 5896A is a coating-grade, high melt, microcrystalline wax used in a variety of applications including; adhesives, candles, cosmetics, food coatings, inks, lubricants, personal care, polish, and textiles. | |
| MICROSERE® 5897A | The International Group, Inc. (IGI Wax) | MICROSERE® 5897A is a light colored, coating-grade, high melt, microcrystalline wax used in a variety of applications including; adhesives, candles, cosmetics, food coatings, inks, lubricants, personal care, polish, and textiles. | |
| MICROSERE® 5909A | The International Group, Inc. (IGI Wax) | MICROSERE® 5909A is a high-melt, microcrystalline wax that is used in a variety of applications including; plastics, adhesives, candles, cosmetics, food coatings, inks, lubricants, personal care, polish, and textiles. | |
| MICROSERE® 5910A | The International Group, Inc. (IGI Wax) | MICROSERE® 5910A is a high-melt, microcrystalline wax that is used in a variety of applications including; plastics, adhesives, candles, cosmetics, food coatings, inks, lubricants, personal care, polish, and textiles. | |
| MICROSERE® 5999A | The International Group, Inc. (IGI Wax) | MICROSERE® 5999A is an amber colored microcrystalline wax with hard consistency and a high melting point. |
